Vidikron Flat Panel Television VL 52 User Manual

I N S T A L L A T I O N / O P E R A T I O N  
M A N U A L  
VL-52 and VL-57  
1080p HIGH-DEFINITION LCD FLAT PANEL DISPLAYS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ONE YEAR LIMITED WARRANTY  
For LCD Displays  
Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup  
and care, you should enjoy many years of unparalleled video performance.  
This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other  
important documents.  
WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:  
SERVICE LABOR: Vidikron will pay for service labor by Vidikron Authorized Service Center when needed as a result of a  
manufacturing defect for a period of one (1) year from the effective date of delivery to the end user.  
PARTS: Vidikron will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for  
a period of one (1) year from the effective date of delivery to the end user. Such replacement parts are then subsequently  
warranted for the remaining portion (if any) of the original warranty period.  
WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:  
Image retention on LCD display panels is specifically excluded from coverage under this Limited Warranty. Image retention or  
staining of an image is the result of misuse of the product and therefore cannot be repaired under the terms of this Limited  
Warranty.  
Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of  
time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers for  
this reason.  
TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are not left on your LCD display panel. Also ensure that  
images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is present on the left and right  
edges of the screen) are used as infrequently as possible. This will prevent permanent retention on your LCD display panel, which  
can be seen permanently under certain conditions once burn-in has occurred.  
The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This is  
why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after being  
displayed continuously for an extended period of time).  
This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not  
cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from  
accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper  
maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and brownouts;  
damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote control units,  
damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this Limited Warranty.  
CAUTION: THIS LIMITED WARRANTY ONLY COVERS VIDIKRON PRODUCTS PURCHASED FROM VIDIKRON AUTHORIZED DEALERS.  
ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. MOREOVER, DAMAGE  
RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE  
UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN  
AUTHORIZED VIDIKRON DEALER TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY  
THE FINE PERFORMANCE OF WHICH YOUR VIDIKRON PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY VIDIKRON  
AUTHORIZED PERSONNEL.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RIGHTS, LIMITS AND EXCLUSIONS:  
Vidikron limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There  
are no express warranties. Vidikron also excludes any obligation on its part for incidental or consequential damages related to the  
failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and some  
states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or exclusions may  
not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.  
EFFECTIVE WARRANTY DATE:  
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as  
evidence of the purchase date.  
IMPORTANT -- WARRANTY REGISTRATION:  
Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we should  
discover a safety problem or product update for which you must be notified.  
CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:  
Repairs made under the terms of this Limited Warranty covering your Vidikron video product will be performed at the location of  
the product, during usual working hours, providing location of product is within normal operating distance from a Vidikron  
Authorized Service Center. In some instances it may be necessary for the product to be returned to the Vidikron factory for repairs.  
If, solely in Vidikron’s judgment, location of product to be repaired is beyond normal operating distance of the closest Vidikron  
Authorized Service Center, or the repair requires the unit be returned to the Vidikron factory, it is the owner’s responsibility to  
arrange for shipment of the product for repair. These arrangements must be made through the selling Vidikron Dealer. If this is not  
possible, contact Vidikron directly for a Return Authorization number and shipping instructions. Vidikron will return product  
transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping costs will be the  
responsibility of the owner.  
COPYRIGHT AND TRADEMARKS:  
© Copyright 2008 Vidikron, a Runco International Company. This document contains proprietary information protected by  
copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any  
mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.  
2
Vidikron, Vision, DVSI, Imagix, CineWide, AutoScope, V Aperture Control, CSMS and IntelliWide are trademarks of Runco, LLC,  
licensed to Vidikron, a division of Runco International. All other trademarks and registered trademarks used in this document are  
the property of their respective owners.  
Vidikron products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents Pending.  
iv  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ADDITIONAL INFORMATION:  
To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this Limited  
Warranty, please call or write:  
VIDIKRON  
Attn: Customer Service Department  
2900 Faber Street  
Union City, CA 94587  
Ph: (510) 324-5900  
Fax: (510) 324-5905  
Toll Free: (888) 4VIDIKRON  
VIDIKRON PRODUCT INFORMATION  
RETAIN THIS INFORMATION FOR YOUR RECORDS  
_________________________________________________________  
Model Purchased  
________________________________________  
Date  
____________________________________________________________________________________________________________  
Serial Number  
____________________________________________________________________________________________________________  
Vidikron Authorized Dealer Name  
____________________________________________________________________________________________________________  
Address  
____________________________________________  
__________________  
State/Province  
________________________  
Postal Code  
City  
____________________________________________  
Phone  
_________________________________________________________  
Fax  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
Thank you for your purchase of this quality Vidikron product! For best performance, please read this manual carefully as it is your  
guide through the menus and operation.  
WARNING  
This symbol is intended to alert the user to the presence of  
uninsulated “dangerous voltage” within the product’s enclosure that  
may be of sufficient magnitude to constitute a risk of electric shock.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK  
DO NOT REMOVE COVER (OR BACK)  
NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
This symbol is intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in the literature  
accompanying the appliance.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that  
produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider  
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is  
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the  
obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where  
they exit from the apparatus.  
11. Only use the attachments/accessories specified by Vidikron.  
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When  
a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
vi  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Compliance Information  
DECLARATION OF CONFORMITY:  
Manufacturer’s Name: Vidikron, a subsidiary of Planar Systems, Inc.  
Manufacturer’s Address: 2900 Faber Street, Union City, CA 94587  
hereby declares that the products Model Numbers:  
VL-52, VL-57  
conform with the provisions of:  
Council Directive 2004/108/EC on Electromagnetic Compatibility;  
EN 55022 “Limits and methods of measurements of radio interference characteristics of information technology equipment” 1998;  
EN 55024 “Limits and methods of measurements of immunity characteristics of information technology equipment” 1998;  
Including:  
EN 61000-4-2 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2: Electrostatic  
discharge immunity test”  
EN 61000-4-3 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 3: Radiated,  
Radio-Frequency, Electromagnetic Field Immunity Test”  
EN 61000-4-4 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical fast  
transient/burst immunity test”  
EN 61000-4-5 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge immunity  
test"  
EN 61000-4-6 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Conducted  
disturbances induced by radio-frequency fields immunity test"  
EN 61000-4-8 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 8: Conducted  
disturbances induced by power frequency magnetic fields immunity test"  
EN 61000-4-11 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage dips,  
short interruptions and voltage variations immunity tests"  
And:  
EN 61000-3-2 "Electromagnetic compatibility (EMC) Part 3, Section 2: Limits for harmonic current emissions (equipment input  
current up to and including 16 A per phase)" 2000;  
EN 61000-3-3 "Electromagnetic compatibility (EMC) Part 3, Section 3: Limitations of voltage changes, voltage fluctuations and  
flicker in public low-voltage supply systems, for equipment with rated current up to and including 16 A and not subject to  
conditional connection" 1995;  
Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety;  
EN 60950 “Safety of information technology equipment, including electrical business equipment”  
The Technical Construction file required by this Directive is maintained at the corporate headquarters of Planar Systems, Inc., 1195  
NW Compton Drive, Beaverton, OR 97006.  
Date of Declaration: January 2008  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FCC PART 15:  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
INDUSTRY CANADA (ICES-003):  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
IMPORTANT RECYCLE INSTRUCTIONS  
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if  
not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws.  
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout the European Union and other  
European countries with separate collection programs)  
This symbol found on your product or on its packaging, indicates that this product should not be treated as  
household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection  
point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,  
you will help prevent potential negative consequences to the environment and human health, which could  
otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve  
natural resources. This symbol is only valid in the European Union. If you wish to discard this product, please  
contact your local authorities or dealer and ask for the correct method of disposal.  
viii  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1Table of Contents  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
x
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1List of Figures  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
List of Figures  
Notes:  
xii  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1Introduction  
This Owner’s Manual describes how to install, set up and operate the Vidikron DView™  
VL-52/VL-57 Flat-Panel LCDs. Throughout this manual, the Vidikron DView™ VL-52/VL-57  
Flat-Panel LCDs are referred to simply as the “DView.”  
1.1  
About This Manual  
Vidikron has prepared this manual to help home theater installers and end users get the  
most out of the DView.  
Target Audience  
Vidikron has made every effort to ensure that this manual is accurate as of the date it was  
printed. However, because of ongoing product improvements and customer feedback, it  
may require updating from time to time. You can always find the latest version of this and  
If You Have Comments About  
This Manual...  
Text Conventions: The following conventions are used in this manual, in order to clarify the  
information and instructions provided:  
Textual and Graphic  
Conventions  
Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT  
to return to the previous menu.”  
Computer input (commands you type) and output (responses that appear on-screen) is  
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to  
Letterbox, type [S4E0002.”  
All keys with functional names are initial-capped, set in bold type and enclosed in angle  
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>  
and <Tab>.  
<Enter> indicates that you may press either the RETURN or ENTER key on your computer  
keyboard if it has both keys.  
In addition to these conventions, underlining, boldface and/or italics are occasionally used to  
highlight important information, as in this example:  
A carriage return must be used after each command or string.  
Note  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Graphic Conventions: These symbols appear in numerous places throughout the manual,  
to emphasize points that you must keep in mind to avoid problems with your equipment or  
injury:  
TIPS highlight time-saving short cuts and helpful guidelines for using  
certain features.  
Tip  
NOTES emphasize text with unusual importance or special significance.  
They also provide supplemental information.  
Note  
CAUTIONS alert users that a given action or omitted action can degrade  
performance or cause a malfunction.  
Caution  
WARNINGS appear when a given action or omitted action can result in  
damage to the equipment, or possible non-fatal injury to the user.  
WARNING  
DANGER!  
DANGER appears when a given action can cause severe injury or death.  
Use the following table to locate the specific information you need in this manual.  
1.2  
Using This Manual  
If you need...  
... Turn to page:  
Information about obtaining service  
General information about the DView™  
VL-52/VL-57 Flat-Panel LCDs  
Installation instructions  
First-time configuration instructions  
Advanced configuration instructions  
Troubleshooting tips  
Specifications for the DView™ VL-52/VL-57  
Flat-Panel LCDs  
2
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Vidikron presents the DView™ VL-52/VL-57 Flat-Panel LCDs, perfect for those who demand  
our award-winning flat panel performance along with advanced LCD technology and  
lightweight design.  
1.3  
Description, Features and  
Benefits  
The DView incorporates the superb Imagix™ digital video processing that produces  
outstanding picture quality with a wide range of both standard and high definition source  
material. In addition, the DView includes the complete Imaging Science Foundation™ (ISF)  
calibration suite to deliver the absolute best images possible under multiple viewing  
conditions.  
The DView offers PIP, PBP, closed captioning, Parental Control (V-Chip) functionality and  
multi-language support. The display includes an integrated stereo audio system  
incorporating surround sound technology and generous power amplification.  
The advanced, TFT active-matrix liquid crystal display panel offers 1920 x 1080 resolution  
and includes Vidikron’s discrete aspect ratio control with IntelliWide™ mode to fill the 16:9  
screen with standard 4:3 images without loss of picture quality. Also included are discrete  
source, aspect ratio and power selection and an RS-232 interface for whole-house or  
automated control system integration.  
The DView is multimedia-ready, with simple computer connections making gaming, Internet  
browsing and other computing activities quick and easy.  
The DView offers these key features and benefits:  
Key Features and Benefits  
Native Resolution: 1920 x 1080 (16:9 Native aspect ratio)  
Multiple aspect ratios with IntelliWide™ mode  
Less than 5 inches deep  
Two HDMI Inputs with High-bandwidth Digital Content Protection (HDCP)  
Exceptional detail and artifact-free video enhancement  
Vidikron video processing with 3:2 film detection circuitry  
Your DView is shipped with the following items. If any items are missing or damaged, please  
Parts List  
contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON.  
VL-52 or VL-57 LCD Display (with Table Stand)  
Remote Control Unit and two (2), AAA-size batteries  
AC Power Cord  
Warranty information and registration card  
Vidikron VL-52 and VL-57 Installation/Operation Manual (this document)  
Optional Accessories:  
Wall Mount kit (part number 956-0262-00)  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes:  
4
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2Controls and Functions  
2.1  
DView at a Glance  
Figure 2-1 shows the locations of the DView controls and indicators.  
Controls and Indicators  
Right Side  
AV  
1
2
MENU  
+
VOL  
3
4
5
7
6
Figure 2-1. DView Controls and Indicators  
1. AV Button (Input Source Selection)  
To select a source, press the AV button (with no menus visible on-screen). Use the or  
button (see below) to highlight the desired input source and press AV again.  
When a menu is visible on-screen, this button operates identically to the ENTER button  
on the DView remote control unit (refer to DView Remote Control on page 9).  
2. MENU Selection Button  
Press this button to access the on-screen display (OSD) controls, or to exit the current  
menu and return to the previous one.  
3. Volume Adjustment Buttons (VOL - / VOL +)  
Use these buttons to adjust the sound volume. When a menu is visible on-screen, these  
buttons operate identically to the left- and right-arrow ( and ) buttons on the DView  
remote control unit.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
4.  
/
When a menu is visible on-screen, these buttons operate identically to the up- and  
down-arrow ( and ) buttons on the DView remote control unit.  
5. Power Button  
6. Remote Control Sensor  
7. Status Indicator LED  
- Lights red to indicate that the DView is in standby mode;  
- Lights green during power-on sequence and during normal operation;  
- Flashes green when the DView receives a signal from the remote control.  
DView Inputs and Outputs  
Figure 2-2 shows the locations of the DView inputs and outputs.  
Right Side  
INPUT2  
R
Audio  
L
VIDEO  
S-VIDEO  
Rear  
INPUT4  
INPUT3  
Monitor-Out  
INPUT1  
Monitor-Out  
INPUT4  
INPUT3  
INPUT1  
Figure 2-2. DView Rear-Panel Inputs and Outputs  
6
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1. INPUT2 Audio Input  
2. INPUT2 Composite Video Input  
Standard composite video input for connecting a VCR, camcorder, laser disc player or  
other composite video source.  
3. INPUT2 S-Video Input  
Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS  
(S-VHS) VCR.  
4. Headphone Jack  
5. Main Power Switch  
6. Power Input (100 to 240 VAC)  
Connect the DView to power here.  
7. RGB  
A 15-pin VGA connection to a personal computer. The DView automatically detects the  
signal resolution.  
8. HDMI1/Computer Input (Digital)  
9. HDMI2/Computer Input (Digital)  
Two, HDCP-compliant digital video inputs for connecting a DVD player, personal  
computer or HD tuner with a DVI or HDMI output.  
For best results, do not run your DVD player in progressive mode.  
Tip  
10. PC Audio Input  
Connect the audio output from a personal computer here.  
11. INPUT3 Component Video (RCA connectors)  
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input.  
This is the input for component video from sources such as DVD players.  
12. INPUT3 Composite Video Input  
13. INPUT3 Audio Input  
Connect the audio output from your Input 3 source here.  
14. INPUT4 Component Video (RCA connectors)  
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input.  
This is the input for component video from sources such as DVD players.  
15. INPUT4 Composite Video Input  
16. INPUT4 Audio Input  
Connect the audio output from your Input 4 source here.  
17. INPUT1 Composite Video Input  
18. INPUT1 Audio Input  
Connect the audio output from your Input 1 source here.  
19. INPUT1 S-Video Input  
20. Monitor-OUT (Composite Video)  
21. Monitor-OUT (Audio)  
22. DIGITAL AUDIO OUT (S/PDIF – Coaxial)  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
23. DIGITAL AUDIO OUT (TosLink – Optical)  
Connect either #22 or #23 to the digital audio input of an A/V amplifier with a Dolby  
®
Digital decoder.  
24. RS-232 CONTROL PORT  
A female, 9-pin D-sub connector for interfacing with a PC or home theater  
automation/control system.  
25. SPEAKER OUTPUT (RIGHT)  
26. SPEAKER OUTPUT (LEFT)  
For connection of the right (25) and left (26) speakers. Connect a speaker with an  
impedance of 4 ohms.  
8
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 2-3 shows the DView remote control, and the paragraphs that follow describe its  
functionality.  
2.2  
DView Remote Control  
OFF  
ON  
1
2
1
4
7
2
5
8
3
6
9
0
TV  
SOURCE  
INPUT  
2
INPUT  
3
INPUT  
4
INPUT  
1
3
5
RGB  
HD  
HDMI1  
HDMI2  
MEMORY  
ISF  
NT  
ISF  
DAY  
CUST  
ANA  
4
ASPECT RATIO  
LET  
BOX  
4X3  
I-WIDE  
ENTER  
VOL -  
VOL +  
6
8
MENU  
EXIT  
PIP  
7
ASPECT  
SIZE  
POSITION  
SWAP  
9
S.SWAP  
TV/AV  
TIMER  
OFF  
10  
S.MODE  
SURRND  
MTS/SAP  
MUTE  
INFO  
11  
13  
PREV  
CHAN  
FAV  
CHAN  
12  
Figure 2-3. DView Remote Control  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1. OFF / ON  
Use these buttons to turn the DView on or off.  
2. Numeric Buttons  
Use these buttons to enter menu pass codes.  
3. Source Selection Buttons  
INPUT 1  
Press this button to switch to Input 1.  
INPUT 2  
Press this button to switch to Input 2.  
INPUT 3  
Press this button to switch to Input 3.  
INPUT 4  
Press this button to switch to Input 4.  
Input 1 and Input 2 have both S-Video and composite video connectors.  
Input 3 and Input 4 have both component and composite video  
connectors.  
Note  
To specify which connection type you are using – or to switch from one to  
the other if equipment is connected to both – use the Input Selection menu  
under Setup (refer to Input Selection on page 37).  
HDMI 1 / HDMI 2  
Use these buttons to select a Digital Video input (HDMI 1 or HDMI 2).  
RGB HD  
Press this button to switch to the RGB HD input.  
4. Memory Preset Buttons  
CUST  
Press to recall settings for the current input from the “Custom” memory preset.  
ISF NT (Night)  
Press to recall settings for the current input from the “ISF Night” memory preset.  
ISF DAY  
Press to recall settings for the current input from the “ISF Day” memory preset.  
10  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Aspect Ratio Selection Buttons  
ANA (16:9 Anamorphic)  
For 16:9 DVDs or HDTV program material.  
4X3 (Standard 4:3)  
The input signal is scaled to fit 4:3 display mode in the center of the screen.  
LETBOX (Letterbox)  
Image in letterbox format is enlarged to fit 16:9, full-screen display and the upper/lower  
portions are “blanked off.”  
I-WIDE (IntelliWide)  
4:3 image is enlarged NON-linearly in horizontal direction to fit 16:9 full screen display.  
6. Arrow Buttons (  
,
,
,
)
Use these buttons to select items or settings, adjust settings or adjust sound volume.  
ENTER  
Press to select a highlighted menu item or confirm a changed setting.  
7. MENU  
Press this button to access the on-screen display (OSD) controls, or to exit the current  
menu and return to the previous one.  
8. EXIT  
Press this button to hide the OSD controls.  
9. Picture-In-Picture (PIP) Function Buttons  
ASPECT  
Press to change the aspect ratio of the PIP window from 4:3 to 16:9 or vice versa.  
SIZE  
Press to choose from three PIP window sizes.  
POSITION  
Press to choose the PIP window position (top left, top right, bottom left or bottom right  
corner).  
PIP  
Press to change the PIP mode (picture-in-picture, picture-by-picture or off).  
P. M O D E  
Press to recall settings for the PIP input from either the “ISF Night” or “ISF Day” memory  
preset.  
S.SWAP  
Press to switch between the main and PIP audio programs.  
SWAP  
Press to swap the main and PIP windows.  
TV/AV  
Press to switch to a different PIP video source.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. TIMER OFF Button  
Press this button to set the sleep timer. Press it repeatedly to scroll through the available  
options (Off, 10, 30, 60, 120 or 180 minutes).  
11. Sound Control Buttons  
S.MODE  
Press this button repeatedly to scroll through the available Equalizer presets (CUSTOM,  
STANDARD, MUSIC, FILM or SPEECH).  
SURRND (Surround)  
Press this button to turn Surround Mode on or off.  
MTS/SAP  
Press this button to select Mono or Stereo sound output.  
MUTE  
Press this button to mute the audio output to the speakers and headphones.  
12. PREV CHAN / FAV CHAN  
Not used.  
13. Miscellaneous Functions  
Not used.  
INFO  
Press this button to view input signal information (source and resolution), audio format  
(mono or stereo) and current time.  
12  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3Installation  
3.1  
Remote Control  
To install batteries in the remote control:  
Battery Installation  
1. Slide the battery cover in the direction of the arrow and remove it.  
2. Insert the included batteries. Ensure that the polarities correctly match the  
markings inside the battery compartment.  
and  
3. Slide the battery cover back on until it snaps into place.  
1. Do not mix an old battery with a new one or different types of batteries.  
Note  
2. If you will not use the remote control for a long time, remove the batteries  
to avoid damage from battery leakage.  
Do not drop the remote control or expose it to moisture or high temperature.  
Notes on Remote Control  
Operation  
The remote control may malfunction under a fluorescent lamp. If that occurs, move the  
LCD display away from the fluorescent lamp.  
Make sure that there is nothing obstructing the infrared beam between the remote  
control and the IR receiver on the LCD display.  
The signal from the remote control can be reflected by walls or other  
surfaces.  
Note  
If the effective range of the remote control decreases, or it stops working, replace the  
batteries with new ones.  
Ambient conditions may possibly impede the operation of the remote control. If this  
happens, point the remote control at the LCD display and repeat the operation.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Table 3-1 gives a quick overview of the DView installation process. The sections following this  
one provide detailed instructions.  
3.2  
Quick Setup  
Installation should be performed by a qualified custom video installation  
specialist.  
Note  
Table 3-1. Installation Overview  
For Details, refer to  
page...  
Step  
Procedure  
Mount the DView on a wall (optional)  
Connect signal sources to the DView  
Connect external controller to RS-232 port (optional)  
Apply power to the DView  
1
2
3
4
5
6
Change the OSD language  
If using the DView with a PC, adjust PC display properties  
Display calibration: adjust the following for each input; save  
settings when finished:  
• Brightness  
• Contrast  
7
• Color level  
• Tint  
• Input position  
14  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Proper installation of your DView will ensure the highest possible picture quality. Whether  
you are installing the DView temporarily or permanently, you should take the following into  
account to ensure that it performs optimally.  
3.3  
Installation Considerations  
You can either place the DView on a table or in an entertainment center, or mount it on a  
wall.  
Wall-Mounting the DView  
If you do decide to wall-mount the DView, ensure that the wall-mount bracket is installed  
according to the instructions included with it. The wall must be capable of supporting a  
redundant weight factor three (3) times the weight of the display, or be reinforced.  
Vidikron recommends that this be done by a custom installation specialist.  
Use only the Vidikron-approved wall-mount kit designed for your display.  
Note  
In general, minimize or eliminate light sources directed at the display. Contrast ratio in your  
images will be noticeably reduced if light directly strikes the display, such as when a shaft of  
light from a window or floodlight falls on the image. Images may then appear washed out  
and less vibrant.  
Ambient Light  
Other considerations and tips that can help improve your installation:  
Other Considerations  
Keep the ambient temperature constant and below 35°C (95°F). Keep the display away  
from heating and/or air conditioning vents. Changes in temperature may cause drifts in  
the display circuitry, which may affect performance.  
Keep the DView away from devices that radiate electromagnetic energy such as motors  
and transformers. Common sources of these include slide projectors, speakers, power  
amplifiers and elevators.  
Proceed as follows to connect the DView to your video sources, external controller(s) – if  
present – and AC power.  
3.4  
Connections to the DView  
When connecting your equipment:  
Turn off all equipment before making any connections.  
Use the correct signal cables for each source.  
Ensure that the cables are securely connected. Tighten the thumbscrews on connectors  
that have them.  
Use the left audio input when connecting mono audio sources.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Connecting the DView to  
Connect your video sources to the DView as shown and described in the sections that follow.  
Source Components  
HDMI Connections: The DView has two HDMI inputs for connecting a BD/HD-DVD/DVD  
player, DTV decoder, personal computer or any other device with an HDMI or DVI output.  
Connect such devices as shown in Figure 3-1.  
Use the HDMI inputs whenever possible. This ensures the highest video  
quality because the signal is carried in the digital domain throughout the  
entire signal path, from source component output into the display.  
Tip  
This DView supports the VESA Display Data Channel (DDC) standard. This  
standard provides “Plug and Play” capability; the display and a VESA  
DDC-compatible computer communicate their setting requirements,  
allowing for quick and easy setup.  
Note  
In order for Plug and Play to work correctly, you must turn on the display  
before you turn on the connected computer.  
Rear of the Display  
INPUT4  
INPUT3  
HDMI or  
DVI-to-HDMI Cable  
(sold separately)  
BD/HD-DVD/  
DVD/DTV STB  
Rear of the Display  
Rear of the PC  
Audio Cable  
(Sold Separately)  
HDMI-to-DVI Cable (Sold Separately)  
Figure 3-1. HDMI Connections  
16  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RGB Connections: The DView has an RGB input for connecting a personal computer; see  
Rear of the Display  
Rear of the PC  
INPU  
INPUT3  
Audio Cable  
(Sold Separately)  
D-Sub 15 Pin Cable (Sold Separately)  
Figure 3-2. Analog RGB Connections  
1. Refer to Computer Signal Compatibility on page 57 for a list of  
computer signals compatible with the DView. Use with signals other  
than those listed may cause some functions not to work.  
Note  
2. Some Macintosh computers may require a Macintosh video adapter.  
Contact your nearest authorized service center or dealer.  
3. This DView may not be able to display images from notebook computers  
in simultaneous (CRT/LCD) mode. Should this occur, switch the  
notebook computer to “CRT only” mode. If you are unsure how to do  
this, refer to your notebook computer’s user manual.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Component Video Connections: If you have a DVD player or DTV decoder with a  
component (YPbPr) output, connect it to INPUT 3 or INPUT 4 of the DView as shown in Figure  
3-3.  
INPUT4  
NPUT3  
Audio Cable  
DVD/DTV STB  
Video Cable  
Figure 3-3. Component Video Connections  
Composite/S-Video Connections: The DView has two (2) S-Video and four (4) composite  
video inputs for connecting a VCR, camcorder, laser disc player or DVD player; see Figure 3-4.  
Composite Video (INPUT 1, INPUT 2,  
INPUT 3 or INPUT 4)  
INPUT1  
VCR  
S-Video (INPUT 1 or INPUT 2)  
Camcorder  
INPUT2  
R
L
Audio  
VIDEO  
Video Game Device  
S-VIDEO  
Figure 3-4. Composite and S-Video Connections  
18  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
The DView has stereo audio and Composite video outputs for connecting to a second VCR or  
other auxiliary equipment. Connect the AV OUT audio and video jacks to the audio and video  
inputs of the VCR or other equipment as shown in Figure 3-5.  
Monitor OUT Connection  
You can route either the main or picture-in-picture (PIP) source signal to the AV output. For  
more information, refer to Monitor Out on page 37.  
The audio output level is fixed. (The volume and mute controls affect only  
the speaker and headphone outputs.)  
Note  
VCR  
Camcorder  
A/V Receiver  
Monitor-OUT  
INPUT1  
Figure 3-5. AV OUT Connections  
You can connect a set of headphones to the DView to watch a program without disturbing  
others. Connect them to the headphone output located at INPUT2; see Figure 3-6.  
Connecting Headphones  
INPUT2  
R
Audio  
L
VIDEO  
S-VIDEO  
Figure 3-6. Connecting Headphones  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting External  
Speakers (Optional)  
Connect the  
(positive) and  
(negative) speaker wires to the rear-panel SPEAKER-R and  
SPEAKER-L terminals; see Figure 3-7. Maintain the correct polarity. For more information,  
refer to the owner’s manual for your speakers.  
12 mm  
Twist exposed  
wire strands  
together.  
Push tab to the  
open position, and  
insert the wire.  
Then, close tab firmly to  
secure the wire in place.  
Right Speaker  
Left Speaker  
Figure 3-7. External Speaker Connection  
Connecting to a Dolby Digital  
Amplifier  
If your home theater has a Dolby Digital amplifier or receiver, connect the digital audio  
output from the DView to the digital audio input of the amplifier/receiver as shown in Figure  
3-8. The DView supports both coaxial (S/PDIF) and optical (TosLink) digital audio  
connections.  
The audio output level is fixed. (The volume and mute controls affect only  
the speaker and headphone outputs.)  
Note  
Digital Audio Cable,  
Optical  
(Sold Separately)  
Digital Audio Cable,  
Coaxial  
(Sold Separately)  
- or -  
Dolby Digital  
Amplifier  
Figure 3-8. Digital Audio Connection  
20  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Use a straight-through RS-232 cable with a 9-pin male connector to connect a PC or home  
theater control/automation system (if present) to the RS-232 port on the DView; see Figure  
3-9.  
RS-232 Controller  
Connection  
For more information about using this connection, refer to Serial Communications on  
To PC or  
Automation/  
Control  
System  
DB-9  
Male  
Connector Pin Assignments:  
2
3
5
Transmit Data  
Receive Data  
Ground  
1, 4, 6, 7, 8, 9  
Not Connected  
Rear Panel  
Figure 3-9. RS-232 Control System Connection  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes:  
22  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4Operation  
1. Turn on your source components.  
4.1  
Turning on the Power  
2. Plug the female end of the supplied power cord into the AC receptacle on the rear of the  
DView (AC 100V ~ 240V). See Figure 2-2.  
3. Connect the other end to your AC power source.  
4. Turn on the main power switch at the rear of the display. The power indicator lights red  
to indicate that the DView is in “standby” mode.  
5. Press the ON button on the remote control to  
turn on the display (or press the power button  
on the side of the display). The power indicator  
OFF  
ON  
lights solid green.  
6. After a brief warm-up period (approximately 10  
seconds), the DView will display an image.  
1
4
7
2
5
8
3
6
9
The DView OSD language is initially set to English, but can also display the menus in French,  
Spanish, Portuguese or German. To change the OSD language:  
4.2  
Changing the OSD  
Language  
1. Press MENU.  
2. Select Setup from the Main Menu.  
3. Select OSD Language from the Setup Menu.  
4. Press or to highlight the desired language and press ENTER. The change takes  
effect immediately.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
To maximize image quality when using the DView with a personal computer, you may need  
to adjust the display properties of your PC video card. To do this:  
4.3  
Setting the PC Display  
Properties  
1. Choose Settings from the Windows Start  
menu and click on “Control Panel.”  
2. Double click on the Display icon.  
3. Click the Settings tab on the display dialog  
box.  
4. Set the Screen area to 1920x1080 pixels.  
5. Click the Advanced button and click the  
Monitor tab on the dialog box. Set the  
Refresh frequency to 60Hz and click OK.  
24  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1. The maximum available resolution and vertical frequency is  
1920x1080/60Hz or the maximum supported by your video card,  
whichever is lower. You can get the best picture at 1920x1080/60Hz.  
Note  
2. The DView supports 24-bit color (16,777,216 possible colors).  
To use the on-screen menus:  
4.4  
Using the On-Screen  
Menus  
1. Press MENU to display the Main Menu.  
2. To select a menu item, use the up- or down-arrow buttons (  
control to highlight it.  
,
) on the remote  
3. Press ENTER or the right-arrow button ( ) to access that menu.  
4. Use the up- or down-arrow buttons ( ) to select the setting you want to change.  
Then, press ENTER or the right-arrow button ( ).  
5. Press the right- or left-arrow button ( ) to change that setting.  
,
,
6. To return to the previous menu, press MENU or ( ).  
The DView OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on the  
selected input source and/or signal characteristics, some menu options may not be available.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Input1  
Input2  
Input3  
Input4  
RGB  
English, Français,  
Español, Português or  
Deutsch  
OSD Language  
PC Mode Adjust  
Auto Adjust  
Clock  
Source  
Phase  
HDMI1  
HDMI2  
16:9  
H. Position  
V. Position  
Factory Reset  
Display  
4:3  
On / Off  
Aspect Ratio  
Letterbox  
IntelliWide  
Brightness  
Contrast  
Color  
Service1, Service2,  
Service3 ... Service6  
Digital  
CC1, CC2, CC3 or CC4  
Text1, Text2, Text3 or  
Text4  
Analog  
0, 1, 2, 3 ... 100  
CC On Mute  
Yes / No  
Tint  
Control  
Sharpness  
DNR  
0, 5, 10, ... 100  
Caption  
Font Size  
Font Style  
FG Color  
0, 10, 20, ... 100  
0, 1, 2, 3 ... 63  
MPEG NR  
Backlight  
Picture Adjust  
0, 5, 10, 15, 20, ... 100  
Digital Font Option  
BG Color  
Edge Color  
FG Opacity  
BG Opacity  
Edge Style  
5400, 6500, 8500 or  
Custom  
Color Temp.  
Gamma  
2.00, 2.02, 2.04 ... 2.40  
Custom  
Save Settings  
Setup  
Custom, ISF Day,  
ISF Night  
Restore Settings  
Balance  
Parental Lock (On/Off),  
TV Rating, Movie  
Rating, Unrated  
(Allow/Block), Change  
PIN (default is 0000)  
L10, L9, L8 ... 0 ... R8, R9,  
R10  
Parental Control  
Letterbox Mode  
Standard, Music, Film,  
Speech or Custom  
Equalizer  
Audio  
Timer  
Letterbox or  
Cinema Fill  
Surround  
Speaker  
Audio Delay  
Time  
(On/Off)  
(On/Off)  
Automatic, Video or  
S-Video  
Input 1/Input 2  
0, 1, 2 ... 40 msecs.  
12:00 AM - 11:59 PM  
Input Selection  
Monitor Out  
Automatic, Video or  
Component  
Input 3/Input 4  
Enable/Disable, Time,  
Input, Volume  
On Timer  
Off Timer  
Sleep Timer  
Main or PIP: Video  
Enable/Disable, Time  
Overscan  
(not available with PC  
signals)  
H. Overscan, H. Shift,  
V. Overscan, V. Shift  
Off, 10, 30, 60, 120 or 180  
minutes  
Input Label  
HDMI Audio  
RGB Signal  
Film Mode  
Auto Backlight  
OSD Timer  
Auto Off  
HDMI or PC  
Video or PC  
Off, 2:3, 2:2 or Auto  
Off / On  
0, 10, 20 ... 60 sec.  
0, 30, 60 or 120 min.  
Automatic, RGB or  
Component  
HDMI CSC  
HDMI 1 / HDMI 2  
Brightness  
Contrast  
Color  
0, 1, 2, 3 ... 100  
Tint  
Sharpness  
ADC Phase Adj.  
DNR  
0, 5, 10, ... 100  
0, 1, 2, 3 ... 63  
0, 10, 20, ... 100  
0, 1, 2, 3 ... 63  
Picture Adjust  
MPEG NR  
Backlight  
0, 5, 10, 15, 20, ... 100  
5400, 6500, 8500 or  
Custom  
Color Temp.  
ISF Calibration  
Gamma  
2.00, 2.02, 2.04 ... 2.40  
0, 1, 2, 3 ... 64  
Black Level  
Custom, ISF Day, ISF  
Night  
Save Settings  
R/G/B Gain  
White Balance  
Blue Enable  
Baud Rate  
R/G/B Offset  
(Enable/Disable)  
115200, 19200, 9600 or  
2400  
Serial Link  
On / Off  
Factory Reset  
Splash Duration  
0, 1, 2, 3, ... 60 secs.  
Figure 4-1. DView OSD Menu Structure  
26  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                                                                   
The Main Menu is the starting point for accessing all DView functions.  
(The ISF Calibration menu is not accessible until you enter a passcode.)  
Main Menu  
VL-52  
Source  
Aspect Ratio  
Picture Adjust  
Audio  
Timer  
Setup  
ISF Calibration  
From the Main Menu, select Source to choose a video signal source.  
Source  
The active source is indicated by an arrow (>) to its left; in this example, Input 1 is the active  
source.  
Input1  
Input2  
Input3  
Input4  
RGB  
>
HDMI1  
HDMI2  
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from  
the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program  
material being viewed; refer to Table 4-1.  
Aspect Ratio  
>
16:9  
4:3  
The currently-selected aspect ratio is indicated by an arrow (>) to its left; in this example, 16:9  
is selected.  
Letterbox  
IntelliWide  
The aspect ratio selection persists until you change it. (It is not saved  
independently for each input.)  
Note  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Table 4-1. Aspect Ratio Settings  
Remote  
Aspect Ratio  
Control  
Key  
Description  
16:9  
ANA  
Select 16:9 to view 16:9 DVDs  
and HDTV programs in their  
native aspect ratio.  
16:9 Image on  
16:9 Screen (Display)  
4:3 images are stretched  
horizontally to fit a 16:9  
display.  
4:3 Image, stretched to fill  
16:9 Screen (Display)  
4:3  
4X3  
4:3 scales the input signal to  
fit in the center of a 16:9  
display. 4:3 is the aspect ratio  
used by computer monitors,  
standard television  
4:3 Image on  
16:9 Screen (Display)  
programming and most VHS  
video cassettes.  
Letterbox  
LET  
BOX  
Letterbox mode scales  
(zooms in on) a 4:3 image  
linearly (by the same amount  
on all sides) to fill a 16:9  
display.  
4:3 Image on  
16:9 Display  
(Letterbox aspect ratio)  
Letterbox is best suited for  
viewing LaserDisc movies or  
non-anamorphic DVDs on a  
16:9 screen.  
IntelliWide  
I-WIDE  
IntelliWide scales a 4:3 image  
NON-linearly (more on the  
sides than in the center) to fit  
a 16:9 screen.  
4:3 Image on  
16:9 Screen (Display)  
4:3 Image on  
16:9 Display  
with IntelliWide  
28  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use the controls in the Picture Adjust menu to calibrate your DView for optimum picture  
quality.  
Picture Adjust  
Picture Adjust  
The DView has been designed to incorporate setup and calibration standards established by  
the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,  
industry-recognized standards for optimal video performance and has implemented a  
training program for technicians and installers to use these standards to obtain optimal  
picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that  
setup and calibration be performed by an ISF-certified installation technician.  
Brightness  
Contrast  
Color  
Tint  
Sharpness  
DNR  
All signal types require separate processing. Therefore, you need to calibrate each input  
separately.  
MPEG NR  
Backlight  
Color Temp.  
Gamma  
When you change a picture quality setting, save the change to a preset  
afterwards. Otherwise, the change will be lost when a different input is  
Note  
Save Settings  
Restore Settings  
selected. (Picture quality settings are saved for each input and resolution  
separately.) For information about saving settings, refer to Save  
Although it may be possible to obtain satisfactory picture quality using the naked eye and  
regular program material, Vidikron recommends using the following calibration tools for  
best results:  
External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test  
DVD or equivalent.  
A blue filter (provided with many test DVDs), for color level and tint adjustments.  
Connect your test pattern source to the input that you are calibrating and proceed as follows.  
Perform the adjustments in the order listed here.  
Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an  
acronym for “Picture Line-Up Generation Equipment.”) Figure 4-2 shows a typical PLUGE  
pattern.  
Below Black  
Above Black  
Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PLUGE patterns vary but generally consist of some combination of black, white and gray  
areas against a black background. The example above includes two vertical bars and four  
shaded boxes.  
Select Brightness from the Picture Adjust menu. Using the left- and right-arrow (  
buttons, adjust the brightness so that:  
)
The darkest black bars disappear into the background.  
The dark gray areas are barely visible.  
The lighter gray areas are clearly visible.  
The white areas are a comfortable level of true white.  
The image contains only black, gray and white (no color).  
Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the  
one shown in Figure 4-3.  
Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast  
Select Contrast from the Picture Adjust menu. Using the left- and right-arrow (  
)
buttons, adjust the contrast to a point just below which the white rectangle starts to increase  
in size.  
Brightness and contrast controls are interactive. A change to one may  
require a subtle change to the other in order to achieve the optimum  
setting.  
Note  
30  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Color Saturation: On your external test pattern source, select a color bar pattern like the one  
shown in Figure 4-4.  
Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint  
Select Color from the Picture Adjust menu. While looking at the color bar pattern through a  
blue filter, adjust the color saturation level until the outermost (gray and blue) color bars  
appear to be a single shade of blue:  
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.  
When tint is decreased, the image appears redder; when it is increased the image appears  
greener. To set the tint, select Tint from the Picture Adjust menu. While looking at the color  
bar pattern through a blue filter, adjust the tint level until the cyan and magenta color bars  
(on either side of the green bar) appear to be a single shade of blue.  
Like the brightness and contrast controls, the color and tint controls are  
interactive. A change to one may require a subtle change to the other in  
order to achieve the optimum setting.  
Note  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust  
sharpness, select Sharpness from the Picture Adjust menu and press ENTER. On your  
external test pattern source, select a pattern like the one shown in Figure 4-5. Adjust as  
needed, looking for white edges around the transitions from black to gray and different sized  
lines in the “sweep” patterns at the top and bottom. Lower the sharpness setting to eliminate  
them.  
Figure 4-5. Typical Test Pattern for Adjusting Sharpness  
DNR: To apply Digital Noise Reduction (DNR) to the input signal, select DNR from the Picture  
Adjust menu. Noise reduction is useful for clearing up noisy RGB images such as those from a  
PC. Adjust as desired using the left- or right-arrow buttons, keeping in mind that reducing  
noise (which reduces high frequencies) may also “soften” the image.  
MPEG NR: Use the MPEG Filter to reduce or eliminate so-called “mosquito noise” in  
MPEG-compressed video signals (digital broadcasts or DVDs). Adjust as needed to minimize  
distortion around the edges of moving objects, moving artifacts around edges and/or  
blotchy noise patterns superimposed over the objects.  
Backlight: The Backlight control changes the apparent brightness of the displayed image. Its  
effect is similar to that of a lamp intensity control on a projector.  
The Backlight control is disabled when Auto Backlight (described on  
page 38) is set to On.  
Note  
Color Temperature: To choose a color temperature setting, select Color Temp. from the  
Picture Adjust menu and press ENTER. (Color temperature defines the “color of gray.”) The  
choices are 5400K, 6500K, 8500K and Custom. The default setting, 6500K, is appropriate for  
most situations. Higher settings produce a “bluer” picture; lower ones impart a reddish hue  
to the image.  
32  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Each color temperature setting has six (6) “white balance” parameters associated with it (two  
each for red, green and blue). These are described later in this section; refer to White Balance  
Gamma: The Gamma control determines how gray shades are displayed between minimum  
input (black) and maximum input (white) for all signals. A good gamma setting helps to  
optimize blacks and whites while ensuring smooth transitions for the “in-between” values  
utilized in other grays.  
Unlike brightness and contrast controls, Gamma allows you to lighten or darken the overall  
tone of your images without changing the extremes. All images will be more vibrant while  
still showing good detail in dark areas.  
The default Gamma setting of 2.20 is appropriate for most typical home theater  
environments.  
Save Settings: The DView lets you save image quality settings for each input and supported  
resolution to a preset. You can recall this preset at a later time by simply pressing a button on  
the remote control or using the Restore Settings menu command (see below).  
You should save changes to any of the following settings to a preset; otherwise they will be  
lost when a new input source or resolution is selected:  
Brightness  
Contrast  
Color saturation  
Tint  
Sharpness  
Gamma  
Color temperature selection (5400, 6500, 8500 or Custom)  
Restore Settings: To recall a preset, choose Restore Settings from the Picture Adjust menu  
and select “Custom,” “ISF Day” or “ISF Night.” Or, use the corresponding buttons on the  
remote control.  
To adjust the DView audio settings, select Audio from the Main Menu and press ENTER.  
Audio  
Balance: To adjust the left/right speaker balance, select Balance from the Audio Menu and  
press ENTER. Use the left- and/or right-arrow buttons to make one channel louder than the  
other.  
Equalizer: The DView has a five-band graphic equalizer that you can use to boost or cut  
certain audio frequencies. To use it, select Equalizer from the Audio menu and press ENTER.  
Select one of four equalizer presets – Standard (flat), Music, Film or Speech – or select Custom  
to create your own according to taste. The five frequency bands are 100, 300, 1000, 3000 and  
10,000 Hertz (Hz).  
Surround: The DView has a “surround sound” mode that simulates a multi-channel sound  
system. To use the surround mode, select Surround from the Audio menu and set it to On.  
When Surround is set to On, the graphic equalizer is disabled.  
Note  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Speaker: To disable the speakers, select Speaker from the Audio menu, set it to Off and press  
ENTER. The effect is similar to using the MUTE button, except that the DView “remembers”  
this setting if you turn off the display, then turn it back on.  
Audio Delay: Use the Audio Delay control to correct audio/video synchronization issues that  
can occur with some types of source material. Select from 0 to 40 milliseconds of delay, as  
needed.  
To set the DView’s internal clock or configure the on/off timers, select Timer from the Main  
Menu and press ENTER.  
Timer  
Time: To set the DView internal clock, select Time from the Timer menu and press ENTER.  
Then, use the up- or down-arrow button to select the hour of the day, AM/PM or the minute  
of the hour to set. Then, use the left- or right-arrow buttons to set that component of the  
time.  
Time  
On Timer  
Off Timer  
Sleep Timer  
When finished, press MENU or EXIT.  
On Timer: Use the On Timer to turn the DView on at a specific time of day. You can also  
specify a source input and volume level.  
Off Timer: Use the Off Timer to turn the DView off at a specific time of day.  
Sleep Timer: Use the Sleep Timer to turn off the DView after a specified interval.  
To set the Sleep Timer:  
Select Sleep Timer from the Timer menu and press ENTER. Use the right- or left-arrow  
button to select 10, 30, 60, 120 or 180 minutes. Then, press MENU.  
– OR –  
Press the TIMER OFF button on the remote control repeatedly to select the desired timer  
interval.  
Setup  
Use the controls in the Setup menu to perform advanced image quality adjustments and  
access various other DView features.  
Setup  
OSD Language: Select OSD Language from the Setup menu and press ENTER. Then, use the  
up- or down-arrow buttons to select the OSD language (English, French, Spanish, Portuguese  
or German). Press ENTER again to confirm your selection.  
PC Mode Adjust: To improve the quality of displayed images from a computer or other  
VESA-compliant, RGB (480p or higher) source, select PC Mode Adjust and press ENTER.  
Auto Adjust: Auto Adjust automatically adjusts settings to optimize computer images. To  
execute Auto Adjust on command, select Auto Adjust and press ENTER.  
Auto Adjust may take some time to complete, depending on the  
characteristics of the incoming signal.  
Note  
Clock: Use the up- or down-arrow buttons (  
right-arrow button ( ) to increase the pixel clock rate; use the left-arrow button ( ) to  
decrease it.  
,
) to highlight Clock. Then, use the  
Phase: Adjust the phase if the image shows shimmer or “horizontal noise.” Pixel phase  
adjusts the phase of the pixel sampling clock relative to the incoming signal. The effect of  
this control is similar to that of a tracking control on a VCR.  
34  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
For best results, use a good test pattern such as a smooth gray consisting of a clear pattern  
of black and white pixels, or a similar “half on, half off” graphic image. (You may notice  
that you can stabilize the image at more than one point. Use either setting in this case.)  
H Position: Use the up- or down-arrow buttons (  
the right-arrow button ( ) to shift the image to the right; use the left-arrow button (  
to shift the image to the left.  
,
) to highlight H Position. Then, use  
)
V Position: Use the up- or down-arrow buttons (  
,
) to highlight V Position. Then, use  
the right-arrow button ( ) to shift the image up; use the left-arrow button ( ) to shift  
the image down.  
To restore the factory-default Clock, Phase and Position settings, select Factory Reset and  
press ENTER.  
Caption: Select Caption from the Setup menu to control the display of closed captions when  
watching programs that contain them.  
Display: Select On or Off to control the display of closed captions.  
Digital: For digital TV broadcasts, select one of six captioning modes (Service1, Service2 ...  
Service6). Service1 usually contains the native-language captions; if a program is  
captioned in more than one language, those captions are carried on Service2 through  
Service6.  
Analog: Select one of four captioning modes: CC1, CC2, CC3 or CC4. CC1 usually contains  
the native-language captions; if a program is captioned in more than one language, those  
captions are carried on CC2, CC3 or CC4.  
The DView also supports “text mode” captioning; to use this feature, select Text1, Text2,  
Text3 or Text4. The text modes, instead of displaying a few lines of captions somewhere  
on the picture, take over all or half of the screen to display scrolling text information. (The  
text modes are seldom used today, so most of the time there is no information there to  
see.) The text field is sometimes used for embedding Internet data (called Interactive TV  
Links, or ITV Links) in the captions.  
CC On Mute: To have the DView show captions when the audio output is muted, set this  
option to Yes.  
Digital Font Option: Select Digital Font Option from the Caption menu to customize the  
appearance of closed captions in digital TV broadcasts.  
Control: Select Program to view the closed captions as presented by the broadcaster.  
Or, select User to override the program’s closed caption formatting.  
Font Size/Font Style: These settings alter the size and typeface of closed captions.  
FG Color/BG Color/Edge Color: These settings alter the text color, background color  
and text border color respectively.  
FG Opacity/BG Opacity: These settings alter the degree to which the program “shows  
through” the captions.  
Edge Style: This setting alters the text border style.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Control: To block the display of television programs or movies based on their  
ratings, select Parental Control from the Setup menu and press ENTER. Enter the default  
Personal Identification Number (PIN) – 0000 – and press ENTER again.  
Parental Lock: This is the “master switch” for the parental controls. Set it to On on Off.  
TV Rating: Select TV Rating from the Parental Control menu to block television programs  
carrying a given rating, to prevent children from watching programs that are deemed  
inappropriate. These ratings and content labels have been established by the United  
States Federal Communications Commission (FCC) to help parents and other caregivers  
determine if a program is suitable for young viewers.  
To block programs carrying a given rating, use the up- or down-arrow to select a rating.  
Then, press the right-arrow button to require the PIN code to be entered to view a  
program with that rating. A lock icon ( ) appears to indicate that the restriction is active.  
Table 4-2 describes the TV ratings and content categories. For more information, visit  
Table 4-2. FCC Ratings and Content Categories  
Rating/Category  
Description  
TV-MA  
Mature Audience Only - graphic violence, explicit sexual content  
and/or offensive language  
TV-14  
TV-PG  
Parents strongly cautioned - intense violence, sexual situations,  
coarse language and/or suggestive dialogue  
Parental guidance suggested - violence, sexual situations, coarse  
language and/or suggestive dialogue  
TV-G  
TV-Y7  
TV-Y  
FV  
General audience – suitable for children and adults  
Children 7 and up  
Suitable for all children  
Fantasy violence or cartoon violence  
Sexual dialogue  
D
L
Offensive language  
S
Sexual content  
V
Violence  
Movie Rating: Select Movie Rating from the Parental Control menu to block movies  
carrying a given rating, to prevent children from watching movies that are deemed  
inappropriate. These ratings have been established by the Motion Picture Association of  
America (MPAA) to help parents and other caregivers determine if a movie is suitable for  
young viewers.  
To block movies carrying a given rating, press the right-arrow button to require the PIN  
code to be entered to view a movie with that rating. A lock icon ( ) appears to indicate  
that the restriction is active.  
Unrated: To allow or block access to unrated content, select Unrated from the Parental  
Control menu and select Allow or Block. Press ENTER to confirm your choice.  
36  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Change PIN: The default PIN for accessing the parental controls or bypassing content  
restrictions is 0000. Vidikron recommends changing this to something less obvious.  
Letterbox Mode: Select Letterbox Mode from the  
Setup menu to change the zoom factor that takes effect  
when you select the Letterbox aspect ratio (refer to  
Letterbox Mode = Letterbox  
4:3 Image on  
16:9 Display  
(Letterbox aspect ratio)  
When you select Letterbox, the image is enlarged  
(zoomed in) by a factor of approximately 1.33.  
When you select Cinema Fill, the zoom factor is  
approximately 1.77 (1.33 x 1.33).  
Letterbox Mode = Cinema Fill  
4:3 Image on  
16:9 Display  
(Letterbox aspect ratio)  
Input Selection: Input 1 and Input 2 have both S-Video and Composite video connectors.  
Input 3 and Input 4 have both Component and Composite video connectors. To specify  
which connection type you are using – or to switch from one to the other if equipment is  
connected to both – select Input Selection from the Setup menu and press ENTER.  
The default setting for all four AV inputs is Automatic. With this setting, the DView searches  
for an active source on both connectors and displays the first one it detects. If equipment is  
connected to both, Automatic input selection triggers a switch when a source component is  
disconnected or powered off.  
Monitor Out: If you have equipment connected to the AV OUT, select Monitor Out from the  
Setup menu to route either the main or PIP audio/video signals to that output.  
Overscan (not available with PC signals): Overscan pushes the outside edge of the active  
picture area of the video signal out beyond the edge of the display area.  
Some television programs are produced based on the assumption that older television sets  
may not display the outer edges of the broadcast picture area. Overscan effectively trims  
away these inactive, outer edges and enlarges the remaining portion of the image to fill the  
display area.  
Use the on-screen slidebars to set the desired amount of horizontal and vertical overscan, as  
well as horizontal and vertical image shift.  
These settings only affect 480i source material. For HDTV, DVDs and other video sources,  
Overscan is generally not necessary or desirable.  
Input Label: You can give each DView input a descriptive name. To do this, select Input  
Label from the Setup menu and choose one from the list.  
HDMI Audio: If the HDMI source is a PC or other device that does not support audio output  
via HDMI, set HDMI Audio to PC.  
If the source does support audio output via HDMI, set this option to HDMI to route the HDMI  
(digital) audio signal to the speakers when HDMI1 or HDMI2 is selected.  
RGB Signal: The RGB input supports both DTV and VESA (computer) resolutions and signal  
timings. If the RGB source is a computer, select PC. If it is a DTV set-top box or other  
equipment with an RGB output, select Video.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Film Mode: To smooth out moving images from interlaced, standard-definition (SD) sources,  
select Film Mode and set it to Automatic.  
In most cases, the DView detects the proper “pull-down” rate and vertical frequency.  
However, if your source is jittery and/or tearing you may wish to specify the pull-down rate  
(2:2 or 3:2) to ensure stable processing for that source.  
Auto Backlight: Select Auto Backlight from the Setup menu and set it to On to have the  
DView adjust the Backlight setting automatically, according to the ambient light level in the  
viewing area.  
OSD Timer: Use the or button to set the OSD Timer. This timer controls how long the  
menus remain on-screen after selecting them. Select from 0 to 60 seconds, in 10-second  
increments. When you set the OSD to 0, the menus remain on-screen until you hide them by  
pressing EXIT.  
Auto Off: Set Auto Off to 30, 60 or 120 minutes to have the DView go into standby mode  
when no source signal is present for the selected amount of time.  
When Auto Off is set to zero (0) minutes (disabled), the DView remains in normal operating  
mode, regardless of the presence or absence of an input sync signal.  
HDMI CSC (Color Space Control): If the color space of the incoming signal on the HDMI1 or  
HDMI2 input is known, select HDMI CSC from the Setup menu and set it to RGB or  
Component.  
In most situations, the Auto setting works well.  
ISF Calibration  
Use the ISF Calibration menu to perform advanced picture quality adjustments. This menu  
should be used by ISF-certified technicians only.  
ISF Calibration  
Picture Adjust  
White Balance  
Blue Enable  
You must enter a passcode to access the ISF Calibration menu.  
Note  
Baud Rate  
Factory Reset  
Splash Duration  
Picture Adjust: The controls in this menu are identical to those in the main Picture Adjust  
menu, but are accessible only by entering the ISF Calibration menu passcode. This makes it  
possible to restore the picture quality settings to what they were when the DView was  
installed, simply by recalling the “ISF Night” or “ISF Day” preset.  
Brightness: Refer to Brightness on page 29.  
Contrast: Refer to Contrast on page 30.  
Color: Refer to Color Saturation on page 31.  
Tint: Refer to Tint on page 31.  
Sharpness: Refer to Sharpness on page 32.  
ADC Phase Adj.: This control works similarly to the Phase adjustment for RGB signals  
(refer to Phase on page 34). Use it to improve the apparent sharpness of 720p and  
lower-resolution Component, S-Video or Composite sources. For best results, adjust ADC  
Phase while displaying a “Sharpness” pattern (Figure 4-5).  
DNR: Refer to DNR on page 32.  
38  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Color Temp.: To choose a color temperature setting, select Color Temp. from the Picture  
Adjust menu and press ENTER. (Color temperature defines the “color of gray.”) The  
choices are 5400K, 6500K, 8500K and Custom. The default setting, 6500K, is appropriate  
for most situations. Higher settings produce a “bluer” picture; lower ones impart a reddish  
hue to the image.  
Each color temperature setting has six (6) “white balance” parameters associated with it  
(two each for red, green and blue). (The White Balance settings for the 5400K, 6500K and  
8500K color temperatures are factory-set and cannot be changed.)  
To create a “Custom” color temperature, select Custom from the Color  
Tip  
Temp. menu and press ENTER. Then, press ENTER a second time to go  
directly to the White Balance menu. (This shortcut is available only from  
the ISF Calibration menu.)  
Black Level: This control compensates for incoming elevated black levels present in  
certain video signals. The default setting (32) results in a minimum black level of  
approximately 0 IRE. Adjust as needed to match the dynamic range of the source; increase  
the value if blacks appear elevated (dark gray). If blacks appear “crushed” (too dark), use a  
lower settting.  
Save Settings: For each input and supported resolution, the DView lets you save image  
quality settings as presets that you can recall at a later time. You can create up to three  
presets – designated “Custom,” “ISF Day” and “ISF Night” – per input and resolution.  
You should save changes to any of the following settings to a preset; otherwise they will  
be lost when a new input source or resolution is selected:  
Brightness  
Contrast  
Color saturation  
Tint  
Sharpness  
Gamma  
Color temperature selection (5400, 6500, 8500 or Custom)  
select “Custom,“ “ISF Day” or “ISF Night.”  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
White Balance: To remove any trace of color from the white areas of the displayed image,  
set the Color Temp. to Custom. Then, choose White Balance from the ISF Calibration menu  
and press ENTER.  
White Balance  
R Gain  
100  
100  
100  
50  
G Gain  
Gain: Use the Gain controls to correct color imbalances in the bright areas of the image. A  
good way to do this is to use a test pattern consisting mostly of solid white areas, such as  
an 80 IRE “window” pattern. If the white areas contain traces of red, green or blue,  
decrease the Gain for that color.  
B Gain  
R Offset  
G Offset  
B Offset  
50  
50  
Offset: Use the Offset controls in the White Balance sub-menu to correct color imbalances  
in the dark areas of the image. A good way to do this is to use a test pattern consisting  
mostly of dark gray areas, such as a 30 IRE “window” pattern. If the gray areas contain  
traces of red, green or blue, decrease the Offset for that color.  
Any white balance adjustments you make here are automatically stored  
Note  
as a “Custom” color temperature. The White Balance settings for the  
5400K, 6500K and 8500K color temperatures are factory-set and cannot  
be changed. Always set the Color Temp. to Custom before making  
any white balance adjustments, so you can see how those  
adjustments affect the image.  
Blue Enable: Blue Enable removes all red and green color information from the image,  
simulating a blue filter. You can use it instead of a blue filter when performing color and tint  
adjustments.  
Baud Rate: Select Baud Rate from the ISF Calibration menu to set the data transfer rate of the  
DView’s RS-232 SERVICE port. (This setting must match the data rate of the device connected  
to the RS-232 input.)  
Serial Link: Select Serial Link from the ISF Calibration menu to configure the RS-232 Service  
port (see Figure 3-9) for normal operation (On) or for software upgrades (Off).  
Factory Reset: To reset all DView settings to their factory defaults, select Factory Reset from  
the ISF Calibration menu and press ENTER. This command is not undoable. Use it with  
caution!  
Splash Duration: Use Splash Duration to control how long the DView splash screen remains  
on-screen after power-up; see Figure 4-6. To prevent this screen from appearing, set the  
Splash Duration to 0.  
CALIBRATED FOR:  
Figure 4-6. DView Splash Screen  
40  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To use PIP, press the PIP (  
) button.  
4.5  
ASPECT  
SIZE  
POSITION  
SWAP  
PIP  
Using Picture-In-Picture  
(PIP)  
S.SWAP  
TV/AV  
TIMER  
OFF  
The PIP window appears inside the main image  
window.  
Press PIP again to switch to side-by-side PIP mode.  
Press PIP again to turn PIP off.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press the TV/AV button (  
) to select a PIP signal source. For each source, Table 4-3 shows  
which of the other sources are available as a PIP source.  
Table 4-3. Available Main and PIP Source Combinations  
PIP Input Source  
INPUT3  
INPUT4  
INPUT1 INPUT2  
RGB  
HDMI1  
HDMI2  
VIDEO COMP VIDEO COMP  
Notes:  
1. “” means that that source is available as a PIP source when that input is selected; “–” means that it is not.  
2. The DView cannot display the same source in both the main and PIP windows, nor can it display RGB and  
HDMI (digital) signals simultaneously.  
42  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To change the PIP window position, press the POSITION  
) button on the remote control repeatedly until  
the window is in the desired position.  
Changing the PIP Position  
ASPECT  
SIZE  
POSITION  
SWAP  
PIP  
(
S.SWAP  
TV/AV  
TIMER  
OFF  
3
4
2
1
To change the PIP window size, press the SIZE (  
button on the remote control repeatedly to achieve the  
desired window size.  
)
Changing the PIP Size  
ASPECT  
SIZE  
POSITION  
SWAP  
PIP  
S.SWAP  
TV/AV  
TIMER  
OFF  
To change the aspect ratio of the PIP window from 4:3 to  
Changing the PIP Aspect  
Ratio  
ASPECT  
SIZE  
POSITION  
SWAP  
PIP  
16:9 or vice versa, press the ASPECT (  
) button on  
the remote control.  
SSWAP  
TV/AV  
TIMER  
OFF  
Refer to Table 4-1 for more information about aspect  
ratios.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Swapping the Main and PIP  
Images  
To swap the main and PIP images, press the SWAP  
button on the remote control.  
ASPECT  
SIZE  
POSITION  
SWAP  
PIP  
S.SWAP  
TV/AV  
TIMER  
OFF  
Swapping the Main and PIP  
Audio Programs  
To swap the main and PIP audio programs, press the  
S.SWAP button on the remote control.  
ASPECT  
SIZE  
POSITION  
SWAP  
PIP  
S.SWAP  
TV/AV  
TIMER  
OFF  
44  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5Maintenance and Troubleshooting  
Regular cleaning will extend the life and performance of the DView. Before cleaning, be sure  
to unplug the power cord from the power outlet.  
5.1  
Cleaning  
Do not under any circumstances use solvents such as benzene or thinner to clean the DView.  
Doing so may cause deterioration or peeling of paint from the display or remote control unit.  
Cleaning the Display Panel  
Body and Remote Control  
Wipe the display and remote control gently with a soft cloth. In case of excessive dirt buildup,  
dampen a soft cloth with a diluted neutral cleaning detergent. Wring the cloth thoroughly,  
then wipe the component and dry it with a dry soft cloth.  
After dusting, wipe the screen gently using a soft cloth (cotton, flannel etc.). Do not use tissue  
or coarse fabric. The screen surface is easily scratched; do not rub it or hit it with a hard  
object.  
Cleaning the Screen  
If you clean the surface of the screen with a wet cloth, do not allow water droplets on the  
surface to enter into the product; this may cause a malfunction.  
As a general rule, use a vacuum cleaner about once a month to clean the vents on the rear  
panel of the display of dust buildup (set the vacuum cleaner to its weakest setting when  
doing this). If not removed, accumulated dust can cause the internal temperature to increase,  
resulting in possible breakdown or fire.  
Cleaning the Vents  
Table 5-1 provides some general guidelines for troubleshooting problems you may  
encounter with the DView. If the suggested solutions fail to resolve the problem or if you  
encounter an issue not described here, please contact your Vidikron dealer or Vidikron  
Technical Support.  
5.2  
Troubleshooting Tips  
Table 5-1. Troubleshooting Chart  
Symptom  
Possible Cause(s)  
Solution  
The display does not turn on  
after initial installation.  
The DView is not plugged  
in or the AC outlet is not  
active.  
Ensure that the DView is  
plugged in and that the AC  
outlet is active.  
Replace the batteries.  
The remote control  
batteries have run out.  
The display is on, but there is  
no picture.  
Incorrect source selection.  
Source component is not  
turned on.  
Select the correct source.  
Turn on the source  
component.  
Source component is  
connected incorrectly or  
not at all.  
Check video connections to  
source component.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Table 5-1. Troubleshooting Chart (continued)  
Symptom  
Possible Cause(s)  
Solution  
Picture is okay, but there is no  
sound.  
Audio output is muted.  
Press the MUTE button on  
the remote control.  
Volume setting is too low.  
Source component is  
connected incorrectly or  
not at all.  
Turn up the volume.  
Check audio connections to  
source component.  
Speakers are connected  
incorrectly or not at all.  
Audio settings are  
incorrect.  
Check speaker connections  
Check the following  
settings: Speaker (page 34)  
For HDMI audio souces,  
ensure that the audio  
output format is “PCM”  
(refer to the manual for the  
source component).  
Image is too bright and/or  
lacks definition in the bright  
areas of the image.  
Contrast is set too high.  
Brightness is set too high.  
Lower the contrast setting.  
Image appears “washed out”  
and/or dark areas appear too  
bright.  
Lower the brightness  
setting.  
Colors in the image are  
swapped; for example, reds  
appear blue or vice versa.  
The Red/Pr, Green/Y or  
Ensure that the source  
outputs are connected to  
the correct DView input.  
Blue/Pb outputs from the  
source are connected to the  
wrong inputs on the DView.  
RGB-HD images appear  
“noisy.”  
Clock and Phase settings  
need adjustment.  
Manually adjust Clock and  
Phase settings, or perform  
an Auto-Adjust (refer to PC  
“Invalid mode” appears  
on-screen.  
The resolution and  
Select a compatible  
resolution and vertical  
frequency (refer to  
frequency of the video card  
in the computer are not  
compatible with the DView.  
The image is too large or too  
small.  
Image size needs adjusting.  
Adjust the image size (refer  
page 34).  
46  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6Serial Communications  
To interface the DView with a home theater automation/control system or a PC running  
terminal emulation software, connect it to your control system or PC as shown in Figure 3-9.  
(Use a straight-through cable.)  
6.1  
RS-232 Connection and  
Port Configuration  
Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop bit  
and no flow control. Set the baud rate to match that of the DView RS-232 port. To check the  
baud rate setting, select Baud Rate from the ISF Calibration menu (refer to page 40).  
Commands are in ASCII format and are not case-sensitive.  
A carriage return is not required after a command.  
6.2  
Serial Command Syntax  
When you send a valid command, the DView executes it and acknowledges it with a  
right-bracket character (]) followed by the four-digit numeric code you sent; for example,  
]0002.  
When you send an invalid command (one followed by values outside the valid range for  
that command), the DView ignores it and returns >MAX or <MIN instead of the four-digit  
code.  
When you send an unrecognized/misspelled command, the DView ignores it and returns  
-N/A instead of the four-digit code.  
Table 6-1 lists the RS-232 command set.  
Table 6-1. Serial Commands  
Command  
Description  
Set audio volume to ### ( = 000-100)  
[
S3A  
0###  
Example: [S3A0075 sets volume to 75  
Audio volume up  
[
[
[
+3A  
-3A  
S3E  
Audio volume down  
Audio mute (speakers/headphones)  
0 = not muted, 1 = muted  
000#  
Example: [S3E0001 mutes the audio output  
Main input selection  
1 = Input1  
2 = Input2  
3 = Input3  
4 = Input4  
6 = RGB  
[
S4A  
000#  
8 = HDMI1  
9 = HDMI2  
Example: [S4A0006 selects RGB  
Select “next” Main AV input  
[
+4A  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Table 6-1. Serial Commands  
Command  
Description  
Aspect ratio selection  
0 = 4:3 (Standard)  
1 = IntelliWide  
[
S4E  
000#  
2 = Letterbox  
3 = 16:9 (Anamorphic)  
Example: [S4E0002 selects Letterbox  
PIP Input selection  
1 = Input1  
2 = Input2  
3 = Input3  
4 = Input4  
6 = RGB  
[
S4G  
000#  
8 = HDMI1  
9 = HDMI2  
Example: [S4G0003 selects PIP Input3  
Select “next” PIP AV input  
[
[
+4G  
SAB  
Power on/off control  
0 = standby, 1 = on  
000#  
Example: [SAB0001 turns unit on  
Caption on/off  
0 = off  
[
SCA  
000#  
1 = on  
Example: [SCA0000 turns caption off  
Set PIP mode  
0 = OFF  
[
SDA  
000#  
1 = PIP  
2 = PBP  
Example: [SDA0002 selects PBP  
Set PIP size  
0 = small  
[
SDB  
000#  
1 = medium  
2 = large  
Example: [SDB0001 selects medium PIP size  
Set PIP aspect ratio  
0 = 4:3  
[
SDE  
000#  
1 = 16:9  
Example: [SDE0001 selects 16:9 aspect ratio PIP window  
Set PIP window position  
0 = Top/Left  
[
SDF  
000#  
1 = Top/Right  
2 = Bottom/Left  
3 = Bottom/Right  
Example: [SDF0001 positions PIP window in upper-right corner of display area  
48  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table 6-1. Serial Commands  
Command  
Description  
The following serial commands are meant to emulate buttons on the remote control. Each button  
has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing  
so via serial commands. These commands provide active OSD responses just like the IR remote.  
Each command begins with [key followed by the four-digit number of the button. No carriage  
return is necessary. The response you receive from the unit if the command is valid will be a  
right-bracket (]) followed by the four-digit numeric code you sent. (For example, the ‘ON’ command  
is [key0015; the response will be ]0015). All commands are in ASCII.  
OFF  
[
key  
0002  
0015  
0004  
0005  
0006  
0008  
0009  
0010  
0012  
0013  
0014  
0035  
0017  
0105  
0027  
0028  
0001  
0102  
0101  
0019  
0003  
0062  
0031  
0040  
0043  
ON  
Number 1  
Number 2  
Number 3  
Number 4  
Number 5  
Number 6  
Number 7  
Number 8  
Number 9  
Number “–”  
Number 0  
INPUT1  
[
key  
[
key  
INPUT2  
INPUT3  
INPUT4  
HDMI1  
HDMI2  
RGB HD  
CUSTOM  
ISF NIGHT  
ISF DAY  
16:9 (ANA)  
4:3  
[
[
key  
key  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table 6-1. Serial Commands  
Command  
Description  
LETTERBOX  
0039  
0126  
0007  
0016  
0018  
0011  
0046  
0026  
0100  
0063  
0047  
0034  
0032  
0037  
0052  
0033  
0036  
0053  
0054  
0024  
0091  
0044  
0055  
INTELLIWIDE  
Right-Arrow key  
Down-Arrow key  
Up-Arrow key  
Left-Arrow key  
ENTER  
[
key  
MENU  
[
[
[
key  
key  
key  
EXIT  
PIP ASPECT RATIO  
PIP SIZE  
PIP POSITION  
PIP  
TIMER OFF  
S.SWAP  
SWAP  
TV/AV  
S.MODE  
[
[
key  
key  
SURROUND  
MTS/SAP  
MUTE  
CLOSED CAPTION (on/off)  
INFO  
50  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7Specifications  
Table 7-1 lists the DView specifications.  
7.1  
DView Specifications  
Table 7-1. DView Specifications  
Native Resolution:  
Screen Size:  
1920 x 1080  
VL-52 = 52 in. (diagonal)  
VL-57 = 57 in. (diagonal)  
Screen Aspect Ratio:  
Available Aspect Ratios:  
DTV Compatibility:  
ISF Settings:  
16:9  
4:3, Letterbox, 16:9, IntelliWide™  
480i/p, 576i/p, 720p, 1080i, 1080p  
Yes  
Contrast Ratio:  
VL-52 = 2000:1  
VL-57 = 1200:1  
Data/Graphics Compatibility:  
Imagix Processing:  
Inputs:  
Refer to Table 7-2  
3:2 or 2:2 pull down  
Multiple input combinations with up to  
(4) Composite Video  
(2) S-Video  
(2) Component Video  
(2) HDMI w/HDCP  
(1) RGB (15-pin D-sub)  
(1) RS-232 Control  
(5) Analog Audio  
(4 stereo RCA pairs + 3.5-mm stereo mini jack)  
Outputs:  
(1) Composite Video  
(1) Analog Audio (stereo RCA pair)  
(1) Stereo headphone (3.5-mm stereo mini jack)  
(1) Digital Audio (S/PDIF, RCA coaxial)  
(1) Digital Audio (TosLink optical)  
Audio System:  
10W RMS x 2 Stereo Amplifier  
Source, power and aspect ratios  
100 to 240 VAC, 50/60Hz  
Discrete IR Control:  
Power Requirements:  
Power Consumption:  
VL-52 = 350 watts  
VL-57 = 400 watts  
Operating Environment:  
Dimensions:  
40ºF to 95ºF (5ºC to 35ºC);  
20% to 80% humidity (non-condensing)  
Weight (including stand):  
VL-52 = 89.5 lbs. (40.60 kg)  
VL-57 = 118.0 lbs. (53.52 kg)  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Table 7-1. DView Specifications (continued)  
Regulatory Approvals:  
Limited Warranty:  
Complies with FCC, CE, C-Tick, NRTL, GOST, MIC, SABS, RoHS,  
China RoHS  
One (1) year parts and labor from the date of delivery to the  
end user.  
Specifications are subject to change without notice.  
54  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 7-1 and Figure 7-2 show the DView dimensions (all dimensions are in inches).  
7.2  
DView Dimensions  
25.51  
3.72  
30.00  
33.72  
7.87  
7.87  
5.55  
Figure 7-1. VL-52 Dimensions  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
27.64  
32.13  
3.72  
35.85  
7.87  
7.87  
6.61  
Figure 7-2. VL-57 Dimensions  
56  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The DView can display video signals from a variety of computer sources via its RGB-HD and  
HDMI inputs.  
7.3  
Computer Signal  
Compatibility  
Table 7-2 lists the signal types that are compatible with the DView, and indicates which of  
those are VESA standards.  
Table 7-2. Computer/Video Signal Compatibility Chart  
Signal  
Type  
Vertical Frequency  
(Hz)  
Horizontal  
Frequency (kHz)  
Mode  
640x350  
RGB  
HDMI  
VESA  
VESA  
VESA  
MAC  
MAC  
MAC  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
85  
85  
60  
67  
72  
75  
56  
60  
72  
75  
60  
70  
75  
60  
75  
60  
60  
85.00  
85.00  
60.00  
66.70  
72.80  
75.00  
56.00  
60.30  
72.20  
75.00  
60.00  
70.10  
75.00  
60.00  
75.00  
60.00  
60.00  
31.28  
35.78  
29.82  
35.00  
37.90  
37.50  
35.20  
37.90  
48.70  
46.90  
48.40  
56.50  
60.00  
47.70  
80.17  
74.52  
67.50  
640x400  
640x480  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
1280x768  
1280x1024  
1600x1200  
1920x1080  
Note: The DView may not be able to display images from notebook computers in simultaneous (CRT/LCD)  
mode. Should this occur, switch the notebook computer to “CRT only” mode. If you are unsure how to do  
this, refer to your notebook computer’s user manual.  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes:  
58  
Vidikron VL-52 and VL-57 Installation/Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020-0714-00 Rev. B  
January 2008  
Vidikron  
2900 Faber Street  
Union City, CA 94587  
510-324-5900  
Fax 510-324-5905  
1-888-4-VIDIKRON  
SERIAL NUMBER  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Radio GR 7i User Manual
Texas Instruments Stereo Amplifier THS4141 User Manual
Toastmaster Quesadilla Maker QM2RCAN User Manual
Tricity Bendix Cooktop SB 410 User Manual
Tripp Lite Switch U225 004 R User Manual
Ultra Products Battery Charger ULT31792 User Manual
Uniden Scanner BC45XLT User Manual
Viking Range F1220L User Manual
Vision Fitness Exercise Bike U70 User Manual
Weed Eater Lawn Mower 96026000202 User Manual