DVD VIDEO PLAYER &
VIDEO CASSETTE RECORDER
SD-K530SU
OWNER’S MANUAL
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
©2004 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
15. Attachments
Only use attachments/accessories specified by the manufacturer.
16. Accessories
Use only with the cart, stand, tripod, bracket, or
This set has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards
incorporated in this unit will protect you if you observe the following proce-
dures for installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
PORTABLE CART
WARNING
17. Disc Tray
Keep your fingers well clear of the disc tray as it
is closing. It can cause personal injury.
18. Burden
Do not place a heavy object on or step on the product. The object
may fall, causing serious personal injury and serious damage to the
product.
1. Read Instructions
All safety and operating instructions should be read before the
product is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Heed Warnings
All warnings on the product and in the operating instructions should
be adhered to.
4. Follow Instructions
All operating and use instructions should be followed.
5. Power Sources
19. Connecting
When you connect the product to other equipment, turn off the
power and unplug all of the equipment from the wall outlet. Failure
to do so may cause an electric shock and serious personal injury.
Read the owner’s manual of the other equipment carefully and fol-
low the instructions when making any connections.
20. Sound Volume
Reduce the volume to the minimum level before you turn on the
product. Otherwise, sudden high volume sound may cause hearing
or speaker damage.
This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply in your home, consult your product dealer or
local power company. For products intended to operate from bat-
tery power, or other sources, refer to the operating instructions.
6. Grounding or Polarization
21. Sound Distortion
Do not allow the product to output distorted sound for a longtime. It
may cause speaker overheating and fire.
22. Earphone
When you use the earphone, keep the volume at a moderate level.
If you use the earphone continuously with high volume sound, it
may cause hearing damage.
Do not defeat the safety purpose of the polarized plug has two
blades with one wider than the other. A grounding-type plug has
two blades and a third grounding prong. The wide blade or the
prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obso-
lete outlet.
23. Laser Beam
Do not look into the opening of the disc tray or ventilation opening
of the product to see the source of the laser beam. It may cause
sight damage.
24. Disc
7. Ventilation
Do not use a cracked, deformed, or repaired disc. These discs are
easily broken and may cause serious personal injury and product
malfunction.
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from over-
heating. These openings must not be blocked or covered. The open-
ings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventila-
tion is provided or the manufacturer’s instructions have been adhered
to.
25. Damage Requiring Service
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normal, or has been
dropped.
8. Heat
Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
26. Servicing
Do not attempt to service this product yourself as opening or
removing the cover may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
9. Water and Moisture
Do not use this apparatus near water. For example: near a bath
tub, wash bowl, kitchen sink, Laundry tub, in a wet basement; or
near a swimming pool.
27. Replacement parts
When replacement parts are required, be sure the service techni-
cian has used replacement parts specified by the manufacturer or
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
10. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Clean only with dry cloth.
11. Power-Cord Protection
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
28. Safety Check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
12. Overloading
Do not overload wall outlets, extension cords, or integral conven-
ience receptacles, this can result in a risk of fire or electric shock.
13. Lightning
Unplug this apparatus apparatus during lightning storms or when
unused for long periods of time. This will prevent damage to the
product due to lightning and power-line surges.
14. Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind
on the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ꢀ Marker Search . . . . . . . . . . . . . . . . . . . . . . . 30
Special DVD Features . . . . . . . . . . . . . . . . . . . . 30
ꢀ Checking the contents of
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Display Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
DVD Video discs: Menus . . . . . . . . . . . . . . . 30
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 30
ꢀ Changing the Audio Language . . . . . . . . . . . 30
ꢀ Changing the Audio Channel . . . . . . . . . . . . 30
ꢀ Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Operation with Audio CD and MP3/WMA Disc. 31-32
Playing an Audio CD and MP3/WMA Disc . . . . . 31
ꢀ Notes on MP3/WMA Recordings . . . . . . . . . 31
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ Moving to another Track . . . . . . . . . . . . . . . 32
ꢀ Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 32
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 32
ꢀ Changing the Audio Channel . . . . . . . . . . . . 32
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 33
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 33
ꢀ Moving to another File . . . . . . . . . . . . . . . . . 33
ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 33
ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 33
ꢀ To rotate picture. . . . . . . . . . . . . . . . . . . . . . 33
ꢀ Notes on JPEG Recordings . . . . . . . . . . . . . 33
Programmed Playback . . . . . . . . . . . . . . . . . . . . .34
Programmed Playback with Audio CD
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13
Connecting Antenna/Cable TV to a DVD+VCR . . 11
Basic TV Connections . . . . . . . . . . . . . . . . . . . . 12
Optional, Preferred TV Connections . . . . . . . 12-13
Before Operation - VCR Part . . . . . . . . . . . . . . 14-16
On-Screen Display(OSD) . . . . . . . . . . . . . . . . . . 14
Setting the On-Screen Display . . . . . . . . . . . . . . 14
Setting the VCR Setup Menu . . . . . . . . . . . . . . . 15
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 16
Before Operation - DVD Part . . . . . . . . . . . . . . 17-20
General Explanation. . . . . . . . . . . . . . . . . . . . . . 17
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 17
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 18-20
ꢀ General Operation . . . . . . . . . . . . . . . . . . . . 18
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 20
and MP3/WMA Disc. . . . . . . . . . . . . . . . . . . . . . 34
Programmed Playback with Video CD . . . . . . . . 34
ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 34
ꢀ Erasing a Track from Program List. . . . . . . . 34
ꢀ Erasing the Complete Program List . . . . . . . 34
Additional Operation . . . . . . . . . . . . . . . . . . . . . . . 35
One Touch Replay . . . . . . . . . . . . . . . . . . . . . . . 35
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 35
Operation
Operation with tape . . . . . . . . . . . . . . . . . . . . . 21-27
Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . 21
Special Effect Playbacks . . . . . . . . . . . . . . . . . . 21
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Still Picture and Frame-by-Frame Playback . 21
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Instant Skip . . . . . . . . . . . . . . . . . . . . . . . . . 21
VISS (VHS Index Search System) . . . . . . . . . . . 22
Normal Recording . . . . . . . . . . . . . . . . . . . . . . . 22
Timer Recording . . . . . . . . . . . . . . . . . . . . . . 23-24
One touch Timer Recording(OTR) . . . . . . . . . . . 24
Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . 25
Copying from DVD to VCR. . . . . . . . . . . . . . . . . 25
VHS Hi-Fi Stereo System/MTS Broadcast . . . . . 26
Tape Counter Memory Feature. . . . . . . . . . . . . . 27
Additional Information . . . . . . . . . . . . . . . . . . . . 27
ꢀ S-VHS Quasi Playback (SQPB) . . . . . . . . . . 27
ꢀ Auto Play System. . . . . . . . . . . . . . . . . . . . . 27
ꢀ Video Head Cleaning . . . . . . . . . . . . . . . . . . 27
ꢀ Blank Search . . . . . . . . . . . . . . . . . . . . . . . . 27
Operation with DVD and Video CD . . . . . . . . . 28-31
Playing a DVD and Video CD. . . . . . . . . . . . . . . 28
General Features . . . . . . . . . . . . . . . . . . . . . 28-30
ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 28
ꢀ Moving to another CHAPTER/TRACK . . . . . 28
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ꢀ Still Picture and Frame-by-Frame Playback . 28
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 29
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 29
Reference
Controlling Your TV
with the Supplied Remote . . . . . . . . . . . . . . . . 36-37
Setting TV Control Codes. . . . . . . . . . . . . . . . . . 36
Table of TV Brand Codes . . . . . . . . . . . . . . . . . . 37
Controlling Your Cable Box /
DSS® Satellite Receiver . . . . . . . . . . . . . . . . . . 38-39
Setting Cable Box/DSS® Satellite Receiver
Control Codes . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Table of Cable Box Brand Codes . . . . . . . . . . . . 39
Table of DSS® Satellite Receiver Brand Codes . . 39
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 40-41
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 42
Country/Area Code List. . . . . . . . . . . . . . . . . . . . . 43
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Limited United States Warranty . . . . . . . . . . . . 45-46
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Disc-related terms
Playable Discs
Title (DVD only)
The main film content or accompanying feature content
or music album.
DVD
(8 cm/12 cm disc)
Each title is assigned a title reference number enabling
you to locate it easily.
Video CD (VCD)
(8 cm / 12 cm disc)
Chapter (DVD only)
Audio CD
(8 cm/12 cm disc)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
In addition, this unit can play a DVD-R, CD-R or
CD-RW that contains audio titles, MP3 or JPEG files.
Track (Video CD and audio CD only)
Notes
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
ꢀ Depending on the conditions of the recording equip-
ment or the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on the unit.
ꢀ The unit cannot play discs that contain data other
than MP3 and CD-DA data.
ꢀ Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
ꢀ Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal). It may result in malfunctions.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Notes on DVDs and Video CDs
Types of video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
able, or other functions may be added.
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business pur-
poses may not be playable on this unit.
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Regional code of the DVD+VCR and DVDs
This DVD+VCR is designed and manufactured
for playback of region 1 encoded DVD software.
1
The region code on the labels of some DVD
discs indicates which type of DVD+VCR can
play those discs. This unit can play only DVD discs
labeled 1 or ALL. If you try to play any other discs, the
message “Check Regional Code” will appear on the TV
screen. Some DVD discs may not have a region code
label even though their playback is prohibited by area
limits.
Remote control battery installation
Detach the battery cover on the rear of the
remote control, and insert two R03 (size
AAA) batteries with
correctly.
and
aligned
AAA
A A A
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Note on DTS-encoded CDs
When playing DTS-encoded CDs, excessive noise may
be exhibited from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the vol-
ume gradually, and keep the volume level low. To enjoy
DTS Digital SurroundTM playback, an external 5.1 chan-
nel DTS Digital SurroundTM decoder system must be
connected to the digital output of the unit.
Remote Control Operation Range
Point the remote control at the remote sensor and press
the buttons.
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Cleaning discs
Precautions
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Handling the unit
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When setting the unit
The picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
away from the TV or radio, or turn off the unit after
removing the disc.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber of plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
About Symbols
About the
symbol display
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not permitted by the DVD+VCR or is not
available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
To obtain a clear picture
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
DVD
DVDs
VCD2.0
Video CDs with the PBC (playback control) func-
tion.
VCD1.1
Video CDs without the PBC (playback control)
function.
For details, please contact your nearest dealer.
CD
Audio CDs.
MP3
MP3 disc.
Moisture Condensation
WMA
WMA disc.
Never operate the DVD+VCR immediately after moving
it from a cold location to a warm location. Leave it for
two or three hours without operating it. If you use the
DVD+VCR in such a situation, it may damage
discs/tapes and internal parts.
JPEG
JPEG disc.
Selecting the Viewing Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
Notes on Discs
• If you want to view DVD deck output source:
Press DVD/VCR SELECT until DVD indicator in the display
window lights and output source of DVD deck is viewed on
the TV screen.
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
• If you want to view VCR deck output source:
Press DVD/VCR SELECT until VCR indicator in the display
window lights and output source of VCR deck is viewed on
the TV screen.
Do not stick paper or tape on the disc.
Notes
• If you insert a disc while the DVD+VCR is in the VCR
mode, the DVD+VCR will switch to DVD mode
automatically.
• If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Disc Tray (DVD deck)
Insert a disc here.
EJECT
Ejects the tape in the VCR deck.
Cassette Compartment (VCR deck)
Insert a video cassette here.
Remote Sensor
Point the DVD+VCR remote control here.
Display window
Shows the current status of the DVD+VCR.
OPEN/CLOSE
Opens or closes the disc
tray.
DVD/VCR indicator
Indicates the active deck.
SKIP (./> )
-
Skip to beginning of current chapter or track,
press twice in quick successions to go to pre-
vious chapter or track.
- Skip to next chapter or track.
Press and hold button for about two seconds
to search backward or forward.
REC
To record normally or to activate
One-touch Timer Recording
by repeated presses.
PLAY (B)
Starts playback of a disc
in the DVD deck.
STOP (x)
Stops playback of tape.
PLAY (B)
Starts playback of a tape in
the VCR deck.
STOP (x)
Stops playback of disc.
REW
Rewinds the tape during the STOP mode or for fast
reverse picture search.
FWD
Advances the tape during the STOP mode
or for fast forward picture search.
ON/STANDBY
Switches the DVD+VCR
ON and OFF.
LINE 2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio
system, TV/Monitor, Another VCR).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
The DVD deck is selected.
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
Indicates when the Progressive scan is active.
Indicates repeat mode.
DVD+VCR is in timer recording or a timer
recording is programmed.(VCR part only)
A cassette is in the VCR deck.
The VCR deck is selected.
[P]
DVD
VCR
REC
PM
TV
Lights when TV mode is active (See page 22.)
Indicates PM time. (AM is not displayed.)
DVD+VCR is Recording.
(VCR part only)
Indicates total playing time, elapsed time, remaining time or
current deck status (Playback, Pause, etc).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio system,
TV/Monitor, Another VCR).
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV, amplifier, receiver, or stereo system.
AC Power Cord
Plug into the power source.
DIGITAL AUDIO OUT (OPTICAL) (DVD OUT)
Connect to digital (optical) audio equipment.
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
DIGITAL AUDIO OUT (COAXIAL) (DVD OUT)
Connect to digital (coaxial) audio equipment.
ANT.IN (ANTENNA INPUT)
Connect the VHF/UHF/CATV antenna to this terminal.
RF. OUT(DVD/VCR OUT)
Connect to a TV with RF coaxial inputs.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
Switches DVD+VCR ON and OFF.
EJECT, OPEN/CLOSE
- Ejects the tape in the VCR deck.
- Opens and closes the disc tray.
INPUT SELECT
To select the VCR deck’s source (Tuner,
LINE 1, or LINE 2).
PROGRAM
Accesses or removes Program menu.
COUNT RESET, CLEAR
CLK/CNT, DISPLAY
Accesses On-Screen display.
Switches among the clock, tape counter
and tape remaining modes on the display.
- Resets tape counter to M 0:00:00
- Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
DVD/VCR ꢀ
BLANK SEARCH, ZOOM
- Finds end points of recording.
- Zoom function.
To control DVD+VCR operating.
TV ꢀ
To control multi-brand TV.
ꢀ RETURN
CABLE BOX ꢀ
To control CABLE BOX.
- Removes the setup menu.
- Displays the menu of a video CD with
PBC.
0-9 numerical buttons
Selects numbered options in a menu.
ꢀ INSTANT REPLAY
Replays through 10 seconds of
playback.
TOP MENU ꢀ
Displays the disc’s Title menu, if
available.
ꢀ PLAY
Starts playback.
MENU ꢀ
Accesses menu on a DVD disc.
ꢀ REW
Rewinds the tape during the STOP
mode or for fast reverse picture search.
ꢀ FF
ATR/SUBTITLE ꢀ
- Adjusts automatically the tape’s picture
onscreen.
Advances the tape during the STOP
mode or for fast forward picture search.
ꢀ SLOW
Forward slow playback of tape.
ꢀ STOP
Stops playback.
- Selects a subtitle language.
AUDIO ꢀ
Selects an audio language (DVD) or an
audio channel (CD).
ANGLE ꢀ
Selects a DVD camera angle if
available.
ꢀ PAUSE/STEP
- Pause playback or recording.
- Press repeatedly for frame-by-frame
playback.
SKIP .ꢀ
Skip to beginning of current chapter or track,
press twice in quick successions to go to
previous chapter or track.
ꢀ REPEAT
Repeat chapter, track, title, all.
ꢀ A-B REPEAT, SP/SLP
- Repeats sequence.
- Selects recording speed
ꢀ MARKER
SKIP > ꢀ
Skip to next chapter or track.
SETUP, VCR MENU
Accesses or removes DVD setup menu
and VCR menu.
Marks any point during playback.
ꢀ VISS, SEARCH
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
- Enters the VISS function mode.
- Displays MARKER SEARCH menu.
ꢀ RANDOM, INSTANT SKIP
- Plays tracks in random order.
- Fast forwards picture search through
30 seconds of recording.
b/B/v/V (left/right/up/down) ꢀ
- Selects an option in the menu
- CH/TRK (+/-): Selects channel of VCR.
Adjusts manually the tape’s picture
onscreen.
ꢀ REC/OTR
Note
Records normally or activates One
touch Timer Recording with repeated
presses.
- VOL +/–: Adjusts TV’s volume.
This remote control uses the
same buttons for VCR and DVD
functions (ex. PLAY).
ENTER ꢀ
- Acknowledges menu selection.
- Displays functions on the TV screen.
ꢀ DVD/VCR SELECT button
Select the output source (DVD or VCR)
to view on the TV screen.
The DVD/VCR indicator on the Front
Panel will light up accordingly to the
mode at each press.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Without Cable Box
Tips
If your cable wire is connected to your TV without a converter
or descrambler box, unscrew the wire from your TV and attach
it to the ANT.IN jack on the DVD+VCR. Use the supplied round
coaxial cable to connect between the DVD+VCR’s RF.OUT
jack and the 75 ohm antenna input jack on the TV. With this
connection, you can receive all midband, super band, and
hyperband channels.
ꢀ
ꢀ
ꢀ
Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
DVD+VCR. Use connections described on pages 11-13.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the best
connections.
For better sound reproduction, connect the DVD+VCR’s
DVD/VCR AUDIO OUT jack to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment. See
Optional, Preferred TV Connections on page 12-13.
With Cable Box
If a converter is required in your cable system, follow the
instruction below:
The cable hookup permits both TV and DVD+VCR operation.
To view or record CATV channel
Caution
1 Tune the TV to the DVD+VCR output channel (CH 3 or 4).
2 Set the DVD+VCR channel selector to the output channel of
the Cable Converter box by pressing the CH/TRK (+/-) or
number (0-9) of your DVD+VCR. (Example: CH3)
3 Select the channel to view at the Cable Converter Box.
ꢀ
ꢀ
Make sure the DVD+VCR is connected directly to the TV.
Tune the TV to the correct video input channel.
Do not connect the DVD+VCR’s DVD/VCR AUDIO OUT
jack to the phono in jack (record deck) of your audio
system.
ꢀ
Do not connect your DVD+VCR via your VCR. The DVD
image could be distorted by the copy protection system.
Notes
ꢀ With this connection, you CANNOT record one program
while viewing another.
ꢀ If you are using a cable box to tune channels, it is not nec-
essary to do Auto Channel Programming (Auto Channel Set)
as indicated on page 15.
Connecting Antenna/Cable TV to
DVD+VCR
Disconnect the antenna leads from the rear of the
1
TV.
Cable TV
Wall Jack
Identify the type of cable from your antenna. If it is
2 a round cable as illustrated, it is a 75 ohm coaxial
antenna cable. This cable will connect directly to
the jack marked ANT.IN on your DVD+VCR.
Back Panel of
Typical Cable Box
Tip
If your antenna lead wire is a flat type antenna cable,
connect it to a Antenna Adaptor (300-ohm to 75-ohm)
(not supplied) and slip the Adaptor onto the ANT.IN
jack. The Adaptor does not screw on to the DVD+VCR,
it just slips over the jack.
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300 ohm)
Rear of DVD+VCR
300/75 ohm
Adaptor
(Not supplied)
OR
OR
Rear of DVD+VCR
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Basic TV Connections
Optional, Preferred TV Connections
ꢀ
Make one of the following connections, depending on
the capabilities of your existing equipment.
Note
You can ONLY watch and listen to DVD playback
through the connections shown below.
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
S-Video connection
Connect the S-VIDEO OUT jack on the DVD+VCR
to the S-Video in jack on the TV using the optional
S-Video cable (S).
1
Note
If you use this connection, tune the TV to the
DVD+VCR’s RF output channel (CH 3 or 4).
Connect the Left and Right AUDIO OUT jacks of
2 the DVD+VCR to the audio left/right in jacks on the
TV using the supplied audio cables (A2).
Component Video (Color Stream®) / Progressive
Scan (ColorStream® pro) connection
How to set the DVD+VCR’s RF output channel
1.When the DVD+VCR is turned off, press and hold
REW m or FWD M on the front panel for about
five seconds.
It will turn itself on and “RF03” or “RF04” appears in the dis-
play window.
ꢀ If your television is a high-definition or “digital ready”
television, you may take advantage of the
DVD+VCR’s progressive scan output for the highest
video resolution possible.
ꢀ If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD+VCR.
2.Press REW m or FWD M on the front panel or
CH/TRK (+/-) on the remote control to change the RF
output channel (CH 03 or CH 04).
3.Turn off and on the DVD+VCR.
4.Press the TV CH to 3 or 4 depending on the RF
output channel you had selected.
Now you can watch the DVD+VCR playback on CH3
or CH4 of your TV.
Connect the COMPONENT / PROGRESSIVE
SCAN VIDEO OUT jacks on the DVD+VCR to the
corresponding in jacks on the TV using an optional
Y Pb Pr cable (C).
1
Connect the Left and Right AUDIO OUT jacks of
2 the DVD+VCR to the audio left/right in jacks on the
TV (A2) using the supplied audio cables.
Audio/Video connection
Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using the
video cable supplied (V).
1
Notes
ꢀ Set the Progressive Scan to “On” on the setup menu
for progressive scan signal, see page 18.
ꢀ When you use Component Video signal, set the
Progressive Scan to “Off” on the setup menu.
ꢀ Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack and S-VIDEO
OUT jack).
Connect the Left and Right DVD/VCR AUDIO OUT
2 jacks on the DVD+VCR to the audio left/right in
jacks on the TV (A1) using the supplied audio
cables.
Note
If you use this connection, set the TV’s source selector
to VIDEO.
Rear of TV
Rear of TV
S-VIDEO
INPUT
COMPONENT VIDEO INPUT
AUDIO INPUT
ANTENNA
INPUT
VIDEO
INPUT
AUDIO INPUT
Y
Pr
Pb
R
L
R
L
C
A2
S
R
A1
V
Rear of DVD+VCR
Rear of DVD+VCR
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Optional, Preferred TV Connections
Rear of DVD+VCR
Note
You can ONLY listen to DVD playback using COAXIAL
(X), OPTICAL (O) and AUDIO OUT (A2) connections.
The tuner and VCR will still be heard through the
RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See
page 12.)
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
O
A1
A2
X
Connect the Left and Right AUDIO OUT (or DVD/VCR
AUDIO OUT) jacks on the DVD+VCR to the audio left
and right in jacks on your amplifier, receiver, or stereo
system using the audio cables (A1, A2) supplied.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
R
L
COAXIAL
OPTICAL
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
Connect one of the DVD+VCR’s DIGITAL AUDIO
OUT jacks (OPTICAL O or COAXIAL X) to the cor-
responding in jack on your amplifier. Use an option-
al digital (optical O or coaxial X) audio cable.
1
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the VCR IN LINE 1 or LINE IN 2 jacks on the
DVD+VCR to the audio/video out jacks on your
accessory component, using the optional audio/video
cables.
You will need to activate the DVD+VCR’s digital
2 output. (See Digital Audio Output on page 19).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Notes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - VCR Part
On-Screen Display (OSD)
Some of these functions will be displayed every time
the VCR is operated.
Easy Information
If the Extended Data Service (XDS) signals are provid-
ed along with normal TV signal in your area or during
playback of a tape recorded with Extended Data
Service (XDS) signals, the station ID, program title and
program details are shown on the TV screen.
When viewing a channel with Extended Data Service
(XDS) signals, press ENTER then the station ID will
appear on the TV screen. Press ENTER again and the
program details will appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice then the
program title and program details will appear on the TV
screen.
❶
❷
❸
❹
❺
PLAY
SP
HI-FI
CH 4
STEREO
OCT 8 , FRI
2:15 PM
❻
❼
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
Indicates the current function.
❸ HI-FI DISPLAY
Program Details
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
Indicates when this unit is playing back tape recorded with
Hi-Fi.
❹ CHANNEL DISPLAY
I
ndicates the selected channel (or LINE1, LINE2).
CH
4
PROGRAM DETAILS
“Home video”
❺ STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻ DATE DISPLAY
Shows the current date. (Month/Date/Day of the week
format)
SP
WABC
STEREO
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
“Home video”
OCT 8 , FRI
2:15 PM
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
❼ CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
Setting the On-Screen Display
The SETUP, clock setting, and timer recordings are
accessed conveniently with On-Screen Menu Displays
that lead you through each step. The following pages
describe the On-screen selections to be set.
Each press of the ENTER changes the TV screen in the
following sequence.
STOP
SP
CH 4
STEREO
Menu Selection
Your VCR allows remote control adjustment of several
features.
Press VCR MENU and the MAIN menu will
OCT 8 , FRI
2:15 PM
2:15 PM
1
appear.
0:35:40
Select the desired menu with v/V button and
REM 1:58
2 then press ENTER.
MAIN MENU
Notes
ꢀ The function displays can be seen displayed on the TV
screen for 5 seconds.
CLOCK SET (page 16)
PROGRAM (page 23)
TUNING (page 15)
SETUP (page 15)
ꢀ The clock (or tape counter, tape remaining) mode will contin-
ue until you press ENTER.
ꢀ The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
Note
Menus remain on-screen for 3 minutes.
Press VCR MENU when finished.
3
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - VCR Part (Continued)
Setting the VCR Setup Menu
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF chan-
nels 14-69 and CATV channels 1-125.
Press VCR MENU and the MAIN menu will
appear.
1
Press v/V to select the SETUP menu, then press
2 ENTER.
Preparation:
ꢀ Connect the DVD+VCR to the desired type of antenna or
The SETUP menu will appear.
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD+VCR on page 11.
AUTO CHANNEL PROGRAMMING
Press VCR MENU and the MAIN menu will
appear.
1
Press v/V to select the TUNING menu, then
2 press ENTER.
Press v/V to choose a desired option on the
3 SETUP menu. Then press b/B to choose a
desired setting.
FUNCTION OSD
The on-screen display of this DVD+VCR can be turned on or
off.
The TUNING menu will appear.
ꢀ FUNCTION OSD can be switched between ON and OFF by
pressing b/B.
AUDIO MODE
Press V to choose the SOURCE SELECT option,
3 then press b/B to select TUNER.
The DVD+VCR has two separate audio playback systems, the
high quality VHS Hi-Fi system and standard NORMAL mono
system. The same audio is generally recorded on both sys-
tems. The VHS Hi-Fi system plays on separate (left and right)
channels, and the NORMAL system plays monaural sound.
The normal track is always played so the cassette can be
played on a DVD+VCR that does not have VHS Hi-Fi.
ꢀ AUDIO MODE can be switched between HI-FI and
NORMAL by pressing b/B.
Press b/B repeatedly to switch among TUNER, LINE1
and LINE2.
Press v/V to choose the AUTO CHANNEL SET
4 option, then press b/B to set the channel.
• The tuner will automatically cycle through all
available channels (TV/CATV) in the area and place
them in the tuner’s memory.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display
to the desired position when both MTS stereo and SAP signals
are received. When only one of the MTS signal is received, the
DVD+VCR automatically selects the corresponding receiving
mode (Stereo or SAP) regardless of the selected position. For
normal operation, the display should be in the STEREO posi-
tion. The DVD+VCR will then record a STEREO program when
available, and record a mono program IF the program is NOT
IN STEREO.
• After the AUTO CHANNEL SET is complete, the TUN-
ING menu will hide and return to the TV screen automat-
ically.
Make sure the TUNING BAND is set appropriate-
5 ly (TV or CATV).
• TV : If you are using a standard antenna to receive
channels.
CATV : If you are using basic cable to receive channels.
• Change the setting of TUNING BAND to check the TV
channels.
For weak STEREO and/or SAP broadcasts, changing the dis-
play to mono may give clearer sound.
ꢀ BROADCAST TYPE can be switched among STEREO, SAP,
and MONO by pressing b/B.
Use CH/TRK (+/-) to cycle the DVD+VCR through
6 the channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUT terminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
ꢀ AUDIO OUTPUT can be switched among STEREO, LEFT,
and RIGHT by pressing b/B.
memory manually. In order to add or erase the chan-
nels, the SOURCE SELECT must be set to TUNER.
1
2
3
Press V to choose the CH. ADD/DEL option on the
TUNING menu. Press b/B to select a channel to
add or erase.
Press ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase more chan-
nels.
Press VCR MENU to return to the TV screen.
Press VCR MENU when finished.
4
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - VCR Part (Continued)
Setting the Clock
Note
There are cases where the TV station does not send or sends
wrong date and/or time information and the DVD+VCR sets the
incorrect time.
If this happens we recommend that you set the clock manually.
The DVD+VCR gives you two ways to set the time and
date: the Auto Clock Feature or manually. The Auto
Clock Feature enables the DVD+VCR to set up the clock
when the DVD+VCR is turned off.
Manual Clock Set
Things to know before starting
The clock uses the 12-hour system. (Be sure to set AM
ꢀ
Example: July 5, 2004 ; 2:15 AM
and PM correctly.)
ꢀ
The initial Clock Setting is JANUARY 1, 2004, 12:00 AM.
Press VCR MENU and the MAIN menu will
appear.
1
Auto Clock Set
Press v/V to choose the CLOCK menu.
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, the DVD+VCR looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the clock
using the Coordinated Universal Time.
2 Press ENTER and the CLOCK menu will appear.
The Auto Clock Feature enables the DVD+VCR to set up
the clock when the DVD+VCR is turned off.
Press VCR MENU and the MAIN menu will
appear.
1
Press v/V to choose the CLOCK menu.
Press b/B to choose the month.
2 Press ENTER and the CLOCK menu will appear.
3
Press V to choose the DAY option.
4 Use b/B to choose the day.
Press V to choose the YEAR option.
The day of the week will display automatically.
5 Use b/B to choose the year.
Press V to choose the TIME option.
6 Use b/B to choose the time.
continuously.
Press V to choose the AUTO CLOCK SET option.
3 Press b/B to choose ON.
Press and hold b/B to advance clock
The Auto Clock Set feature is set to ON at the factory. In
the ON setting, the DVD+VCR looks for a channel
carrying XDS (Extended Data Services) information. XDS
updates the clock using the Coordinated Universal Time.
Press E to choose the DAYLIGHT SAVINGS
item.
7
Use b/B to choose AUTO, ON or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR sets the clock when the
Daylight Saving Time is started and ended.
Press
V
to choose the DAYLIGHT SAVINGS
4 item.
Press b/B to choose AUTO, ON or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR sets the clock when the
Daylight Saving Time is started and ended.
Press
V
to choose the TIME ZONE item.
5 Press b/B to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
PACIFIC, ALASKA or HAWAII).
Press VCR MENU when finished.
If “AUTO” is selected as the time zone, the VCR sets the
clock using the first Coordinated Universal Time informa-
tion it finds in a broadcast signal.
8
Press VCR MENU when finished.
6
7
Note
If setting the clock manually, “AUTO CLOCK SET” must
set to “OFF”.
If set to “ON”, an incorrect date and/or time will be
entered again when the DVD+VCR is turned off.
Turn off the DVD+VCR and the auto clock set-
ting works.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - DVD Part
Use b/B to change the setting of an item.
3 The number buttons can also be used for setting
numbers (e.g., title number). For some functions,
press ENTER to execute the setting.
Caution:
Before using the remote control, press the DVD/VCR
button to select the device to be operated. Then press
DVD/VCR SELECT button to select DVD mode.
Temporary Feedback Field Icons
General Explanation
TITLE
Repeat Title
This manual gives the basic instructions for operating
this unit. Some DVDs require specific operation or allow
only limited operation during playback. When this
CHAPT
Repeat Chapter
TRACK
Repeat Track (non-PBC Video CDs
and Audio CD only)
occurs, the symbol
appears on the TV screen, indi-
ALL
Repeat Disc (non-PBC Video CDs
and Audio CD only)
cating that the operation is not permitted by this unit or
is not available on the disc.
A
B
Repeat A-B
On-Screen Display
The general playback status can be displayed on the
TV screen. Some options can be changed on the menu.
OFF
Repeat Off
Resume play from this point
Action prohibited or not available
On-screen display operation
Notes
Press DISPLAY during playback.
ꢀ Some discs may not provide all of the features on the
on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
1
Use v/V to select an item.
2 The selected option will be highlighted.
DVD
Options
Function (Use v
/
V to select desired option)
Selection Method
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
b/B, or
Numeric, ENTER
1/3
1/12
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B, or
Numeric, ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Numeric, ENTER
0:16:57
Audio language
and Digital Audio
Output mode
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1
ENG
D
b/B, or AUDIO
5.1 CH
Subtitle language
Shows the current subtitles language, and
changes the setting.
OFF
1/1
b/B, SUBTITLE
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
b/B, ANGLE
Sound
Shows the current sound mode, and
changes the setting.
NORM.
b/B
VCD1.1
VCD2.0
Options
Function (Use v/V to select desired option)
Selection Method
Track Number
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
b
/
B
,
, or
ENTER
1/4
Numeric
Time
Shows the elapsed playing time (Display only)
0:16:57
–
Shows the audio channel, and
changes the audio channel.
Audio Channel
Sound
STER.
b
/
B, or AUDIO
Shows the current sound mode, and
any changes to the setting.
NORM.
b
/
B
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - DVD Part (Continued)
Picture
Initial Settings
You can set your own Personal Preferences on this unit.
TV Aspect DVD
4:3 Letterbox: Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
General Operation
Press SETUP.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off.)
1
The setup menu appears.
Original
English
Disc Audio
Disc Subtitle
Disc Menu
Rating
French
German
Spanish
Italian
16:9 Wide: Select when a 16:9 wide TV is connected.
Area Code
TV Aspect
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
Menu Language
Chinese
Polish
Progressive Scan
Digital Audio Output
Others
Hungarian
Other — — — —
Area Code
TV Aspect
Menu Language
Progressive Scan
Use v/V to select the desired item.
2 The screen will show the current setting for the
While the desired option is selected, press B,
Digital Audio Output
Others
selected option, as well as alternate setting(s).
3 then v/V to select the desired setting.
Progressive Scan DVD
Press ENTER to confirm your selection.
Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the DVD
Player to a standard (analog) television, set Progressive
Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
4 Some items require additional steps.
Press SETUP, RETURN, or PLAY N to exit the
5 setup menu.
Language
Disc Language DVD
Select a language for the disc’s Menu, Audio, and Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to enter
the corresponding 4-digit number according to the Language Code
List on page 42. If you enter the wrong language code, press
CLEAR.
Off
On
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Note
Disc Language selection may not work for some DVDs.
Original
English
Disc Audio
Disc Subtitle
Disc Menu
Rating
Others
French
German
Spanish
Italian
Area Code
TV Aspect
Menu Language
Chinese
Polish
Caution
Progressive Scan
Once the setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error,
you must reset the DVD+VCR. First, remove the disc in
the DVD+VCR. Next, press STOP (x) and hold it for
five seconds before releasing it. The video output will be
restored to the standard setting, and a picture will once
again be visible on a conventional analog TV or monitor.
Digital Audio Output
Others
Hungarian
Other — — — —
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - DVD Part (Continued)
Sound
DVD
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Digital Audio Output
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connected the DVD+VCR’s DIGITAL AUDIO OUT
jack to a Dolby Digital decoder (or an amplifier or other
equipment with a Dolby Digital decoder).
Vocal DVD
Stream/PCM: Select “Stream/PCM” if you connected
the DVD+VCR’s DIGITAL AUDIO OUT jack to an ampli-
fier or other equipment with a DTS decoder, Dolby
Digital decoder or MPEG decoder.
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
VCD2.0
VCD1.1
PBC
Set Playback Control (PBC) to On or Off.
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD+VCR outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
Auto Play DVD
You can set up the DVD Player so a DVD disc automat-
ically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search a title where playback time is longest and then
play back the title automatically.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Sample Freq.
48 KHz
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Menu Language
96KHz
Progressive Scan
Note
The Auto Play function may not work for some DVDs.
Digital Audio Output
Others
VCD2.0
VCD1.1
B.L.E. (Black Level Expansion) DVD
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Sample Frequency
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
Off: Standard grey scale. (7.5 IRE cut off)
Pluge (Blacker than Black) DVD
For proper adjustment of your television brightness
settings utilizing a commercially available test disc.
On: Select when you adjust the level of your TV using a
commercially available test disc that contains pluge signals.
Off: For normal use.
VCD2.0
VCD1.1
DNR (Digital Noise Reduction) DVD
You can reduce ambient noise in the picture.
DNR1: Normal level
DNR2: Expanded level.
Others
The DRC, Vocal, PBC, Auto Play, B.L.E., Pluge and
DNR settings can be changed.
Off:
Off.
ꢀ Press v/V to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Notes
– Actual picture enhancement may vary depending on the
quality of the disc.
– While the DNR2 (expanded level) can provide additional
improvement in the reduction of noise in the video signal, it
may produce undesirable picture artifacts on some discs.
Should this occur, select a more appropriate DNR level (nor-
mal or off).
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
– Depending on the disc, some picture detail may be lost by
the picture enhancement.
Menu Language
Progressive Scan
– A DVD audio disc with Dolby Digital or DTS soundtrack may
be played, some DVD audio discs include moving pictures
which may be modified by the above processes.
Digital Audio Output
Others
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - DVD Part (Continued)
Parental Control
DVD
Area Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country/Area Code List”, page 43).
Rating DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code Set
Disc Audio
Disc Subtitle
Disc Menu
Rating
U
S
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
8
Disc Audio
Disc Subtitle
Disc Menu
Rating
7
6
Select Area Code using the v/V buttons on the
setup menu.
5
1
Area Code
TV Aspect
4
3
While Area Code is selected, press B.
Menu Language
2
Progressive Scan
2
3
4
1
Digital Audio Output
Others
Unlock
Change
Follow step 3 of “Rating” on left.
Select the first character using the v/V buttons.
Shift the cursor using 2 button and select the
Select “Rating” on the Setup menu using the
v/V buttons.
1
2
While “Rating” is selected, press B.
5 second character using v/V buttons.
Press ENTER to confirm your Area code
When you have not entered a password yet;
6 selection, then press SETUP to exit the menu.
Note
3 Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
Confirmation of the 4-digit password is necessary when
the password is changed (see “Changing the 4-digit
Code” below ).
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press ENTER.
Changing the 4-digit Code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old password, then press ENTER.
3 Select Change using v/V buttons then press
ENTER.
4 Enter the new 4-digit password, then press ENTER.
5 Enter exactly the same password a second time and
verify by pressing ENTER.
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
Select a rating from 1 to 8 using v/V buttons.
4 Level 1 : DVD software for adults cannot be
played back.
Level 8 : All DVD software can be played back.
The limitation will be more severe as the level
number is lower.
6 Press SETUP to exit the menu.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
If you forget your 4-digit Code
If you forget your password, clear the current password
by following the procedure below.
Ratings 1 to 8: Some discs contain scenes not suit-
able for children. If you set a rating for the DVD+VCR,
all disc scenes with the same rating or lower will be
played. Higher rated scenes will not be played unless
an alternative scene is available on the disc. The alter-
native must have the same rating or a lower one. If no
suitable alternative is found, playback will stop. You
must enter the 4-digit password or change the rating
level in order to play the disc.
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared.
3 Enter a new password as shown above to the left
(Rating).
Press ENTER to confirm your rating selection,
5 then press SETUP to exit the menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
Normal Playback
Special Effect Playbacks
Preparation:
ꢀ Turn on the TV.
Special effects playback notes
ꢀ Horizontal lines (noise bars) will appear on the TV screen.
This is normal.
ꢀ The audio is automatically muted during special effect modes,
so there is no sound during search.
ꢀ During the high-speed picture search modes, a short period is
needed to stabilize tape speed when re-entering the PLAY
mode. Slight interference may be observed during this period.
ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or
set the TV’s source selector to VIDEO.
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
ꢀ Set the Output Source to VCR as shown in Selecting the
Viewing Source on page 6.
Insert a prerecorded video cassette.
Search
1
The indicator will light and the DVD+VCR will
power-up automatically.
ꢀ Make sure that the TIMER indicator in the display
window is not lighted. If it is, press POWER once.
ꢀ If a tape without a safety tab is inserted, the unit will
start playback automatically.
This function lets you quickly and visually search for a
desired tape section in either direction: forward and
reverse.
1 Press REW or FF during playback.
The DVD+VCR will be activated in the SEARCH
mode.
Press PLAY once.
2 PLAY appears on the TV screen .
ꢀ It is not necessary to select the tape speed for play-
back. It will be automatically selected by the DVD+VCR.
ꢀ In playback, the TV/VCR selector switches to VCR
mode automatically.
2 To return to playback, press PLAY.
Still Picture and Frame-by-Frame
Playback
1 Press PAUSE/STEP during playback.
Press STOP to stop playback.
3 STOP appears on the TV screen.
ꢀ If the tape reaches the end before STOP is pressed, the
DVD+VCR will automatically stop, rewind, eject, and it
will turn itself off.
Still picture will appear on the TV screen.
ꢀ If a still picture vibrates vertically, stabilize it by pressing
CH/TRK (+/-) on the remote control.
ꢀ If the DVD+VCR is left in the STILL mode for more than 5
minutes, the DVD+VCR will automatically enter the STOP
mode to protect the tape and video heads.
Tracking Control
Auto Tracking
The automatic tracking function adjusts the picture to
remove snow or streaks.
The AUTO TRACKING function works in the following
2 Press PAUSE/STEP repeatedly to advance the
video picture one frame at a time while viewing a still
picture.
3 To return to playback, press PLAY.
cases:
Slow Motion
ꢀ When the ATR(AUTO TRK) button is pressed.
ꢀ A tape is played back for the first time.
ꢀ Tape speed (SP, LP, SLP) changes.
ꢀ Streaks or snow appear because of scratches on the tape.
1 Press SLOW during playback or still mode.
The tape will be played back at a speed 1/19 times
slower than the normal speed.
ꢀ During slow playback, use CH/TRK (+/-) to minimize
noise bands.
Manual Tracking
If noise appears on the screen during playback, press
CH/TRK (+/-) until the noise on the screen is reduced.
ꢀ If slow motion mode continues for more than 3 minutes,
the DVD+VCR will automatically change to playback
mode.
ꢀ In case of vertical jitter, adjust these controls very carefully.
ꢀ Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3 sec-
onds.
2 To return to playback, press PLAY.
Instant Skip
This is useful for skipping commercials or short program
segments.
1 Press INSTANT SKIP during the playback mode.
The tape will fast forward picture search through 30
seconds of recording.
ꢀ The skipping time can be extended by pressing INSTANT
SKIP.
ꢀ Subsequent presses result in advancing the fast forward
picture search time by 30-second increments (maximum 3
minutes).
2 When the search is completed, the DVD+VCR will go
into playback mode automatically.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
VISS (VHS Index Search System) Normal Recording
The VHS INDEX SEARCH SYSTEM enables you to
locate the beginning of any recording made on this VCR.
Whenever a recording begins, an invisible INDEX mark is
recorded on the tape.
Preparation:
ꢀ Turn on the power of both the DVD+VCR and TV.
ꢀ Tune the TV to the DVD+VCR output channel (CH 3 or 4) or
set the TV’s source selector to VIDEO.
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
VISS Scan
VISS SCAN lets you search out each VISS mark on the
recorded tape and play 5 seconds before advancing to
the next VISS mark.
Insert a video cassette that the safety tab intact.
1
Select the desired channel by using CH/TRK
2 (+/-).
Insert a cassette tape that has VISS signals
marked.
1
ꢀ If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select the
LINE1 or LINE2 by pressing INPUT SELECT.
Press the VISS button once during PLAYBACK
2 or STOP mode.
The VISS -- indicator will appear in the display win-
dow.
Set the desired recording speed (SP or SLP) by
3 pressing SP/SLP.
Set the MTS mode as desired (See page 15, 26).
Press either the FF or the REW button.
3 The VISS SCAN will start. The indicator appears
simultaneously during scanning. The tape will be
rewound or rapidly advanced to the next signal
marked.
ꢀ This DVD+VCR is not designed to record in LP mode.
4
Press REC/OTR once.
5 Recording will start. (The REC indicator will light in
The tape will be played back for approximately 5
seconds, and then rewound or rapidly advanced to
the next VISS signal.
ꢀ Press VISS or STOP button to stop the VISS SCAN
mode.
the display window.)
ꢀ REC indicator appears only when the Output Source is
set to VCR.
ꢀ If a cassette with no safety tab is loaded, the cassette
will be ejected automatically.
At the desired program, press the PLAY button.
4 Normal playback of that program will begin.
VISS Search
Press STOP to stop recording.
If the tape reaches the end before STOP is pressed, the
DVD+VCR will automatically stop, rewind, eject, and it will
turn itself off.
6
You can locate the desired program and play it back
automatically by designating the number of its VISS sig-
nal. Up to the 99th VISS signal from the preset position
on the tape can be located.
To pause the recording
1 Press PAUSE/STEP to pause the tape during
recording.
The REC indicator will flash in the display window.
Press the VISS button once during PLAYBACK
or STOP mode.
The VISS -- indicator will appear in the display win-
dow.
2 When you want to continue recording, press
PAUSE/STEP or press REC/OTR.
1
ꢀ After 5 minutes in pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
Enter the number of VISS signals you wish to
2 skip.
To record one TV program while
watching another
1 Press TV/VCR to select the TV mode during record-
ing.
The TV indicator appears.
2 Using the TV, select the channel to be viewed.
Up to 99 signals may be skipped from any given
position on the tape.
Press either the FF or REW button once.
3 The SCH 02 (for example) message appears in the
display window. When the desired VISS signal is
found, playback begins automatically.
ꢀ If the end of the tape is reached during forward VISS
search, the VCR will automatically stop, rewind, eject,
and turn itself off.
Tips
Always use PAUSE/STEP for best results when making
changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP to put the unit in pause mode. Then select the
desired channel on the DVD+VCR, and press PAUSE/STEP
again to resume recording.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Timer Recording
Use V to choose the SPEED option.
Use b/B to choose the desired recording
speed (AUTO, SP or SLP).
ꢀ AUTO mode determines how much tape is left and
switches speed from SP to SLP, if necessary, to
complete recording the program. There will be some
picture and sound distortion at the point of the speed
change.
10
11
This DVD+VCR can be programmed to record up to 8
programs within a period of 1 year. For unattended
recording, the timer needs to know the channels to be
recorded and the starting and ending times.
Things to know before starting
If you try to set the program timer before setting the clock,
Use V to choose the REPEAT option.
Use b/B to choose the desired repeat (ONCE,
WEEKLY or DAILY).
ONCE event....for recording up to 8 programs on a
single day or over the days within a period of 1 year.
WEEKLY event....for recording up to 8 programs on a
certain day of every week.
ꢀ
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
ꢀ
Make sure a tape is in the DVD+VCR and the safety tab is
in place or the tape will be automatically ejected.
DAILY event....for recording up to 8 programs at the
same time(s) Monday through Friday.
Preparation:
ꢀ Turn on the power of both the DVD+VCR and the TV.
ꢀ
Be sure the TV is set to the DVD+VCR output channel (3 or 4).
ꢀ Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
Press VCR MENU and the MAIN menu will
appear.
1
2
Use v/V to choose the PROGRAM menu.
Tip
If the input data is wrong, use v to select the data
and correct it using b/B.
Press ENTER to go to the PROGRAM menu.
3 The PROGRAM menu will appear.
Press VCR MENU, the program will be memo-
rized at the DVD+VCR.
ꢀ TIMER indicator lights in the display window.
ꢀ If the program preset time is past, the PAST TIME
PROGRAMMED message will appear on the TV
screen. Return to the incorrect program and program
it with the correct time.
ꢀ If all programs have already been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
12
ꢀ If you had entered a past date, the timer recording
will be performed on that date of the next year.
ꢀ Additional programs may be entered by repeating
steps 1-12.
Use b/B to choose the PROGRAM No. (1-8).
Cable Users: If your cable hookup is via a TV convert-
er box, you can program multiple recordings only on
the converter box output channel. This is because the
converter determines what channel you view through
your DVD+VCR.
4
Use V to choose the MONTH option.
5 Use b/B to choose the desired month.
Use V to choose the DAY option.
Press STOP to stop timer recording.
6 Use b/B to choose the desired day.
13
Use V to choose the START option.
Use b/B to choose the desired start time.
Press and hold b/B to advance the clock faster.
7
Tip
If you have finished programming and you want to set the
DVD+VCR to record the programs you have entered.
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
DVD+VCR. The DVD+VCR is now set to record the preset
programs.
Use V to choose the STOP option.
8 Use b/B to choose the desired stop time.
Press and hold b/B to advance the clock faster.
Use V to choose the CHANNEL option.
9 Use b/B to choose the desired channel
(Channel, LINE1 or LINE2).
Note
If the power fails or the DVD+VCR is unplugged from the AC
outlet, the correct clock time and timer settings are kept in
memory for approximately 3 seconds. After 3 seconds, the
clock and program timer must be reset when power is
restored. Reset the clock according to instructions.
Cable Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD+VCR (page 11),
using a cable box converter, you must set the channel in
this step to match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box instead of
with the DVD+VCR.
After setting a timer recording, it will start if a timer recording
passes over the start time and stop at the programmed end
time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Set the desired recording speed (SP or SLP) by
3 pressing SP/SLP.
Press REC/OTR twice.
Checking (Erasing) the Timer Program
Programming can be checked whenever the DVD+VCR
is turned on.
1 Press VCR MENU and the MAIN menu will appear.
2 Use v/V to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
The tape speed will appear on the TV screen.
The menu as illustrated, will appear on the TV screen.
ꢀ Recording will start. (The TIMER indicator will light)
4
Press REC/OTR repeatedly to select the
5 recording time length.
At the end of the recording, the DVD+VCR will stop
recording and shut off.
ꢀ During One touch Timer Recording, changing the chan-
nel on the DVD+VCR will not be possible.
ꢀ You can stop the recording by pressing STOP.
ONE TOUCH TIMER RECORD MENU
3 Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
0H30M ..... 9H00M ➝ 0H00M
ONE TOUCH TIMER RECORD
CHANNEL
SPEED
2
SP
Length Display
4 Press VCR MENU to return to the TV screen.
(each additional press of
REC/OTR increases
recording time 30 minutes)
START
LENGTH
NOW
0H30M
Program Priority
If the recording start and end
times of preset programs
overlap on the same day
(see the example and dia-
gram left), program number
Checking the Recording Time
Press REC/OTR once to check the recording time. The
recalled setting will automatically return to the TV
screen after 6 seconds.
2 will not be recorded until
program number 1 is fin-
ished.
The first part of program number 2 will not be recorded.
The same thing will happen to program number 3.
To extend the Recording Time
The recording time can be extended anytime by press-
ing REC/OTR.
Subsequent presses result in advancing the recording
time by 30-minute increments to a maximum fo 9 hours.
One touch Timer Recording(OTR)
Notes
ꢀ If you press PAUSE/STEP during One touch timer recording,
the DVD+VCR will enter the recording pause mode. Instant
timer recording is cancelled.
One touch Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
ꢀ If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to
normal recording mode.
Preparation:
ꢀ Turn on the power of both the DVD+VCR and the TV.
ꢀ Be sure the TV is tuned to the DVD+VCR output channel (3
or 4).
ꢀ If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
Insert a video cassette with the safety tab intact.
1
Select the desired channel by using CH/TRK
2 (+/-) or number (0-9).
The channel number appears on the TV screen.
ꢀ If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select the
LINE1 or LINE2.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Dubbing and Editing
Copying from DVD to VCR
If you wish to edit or dub your camcorder (or another
VCR) recordings to this DVD+VCR, the rear (or Front)
panel mounted Audio and Video (A/V) input jacks
make the connections quick and easy. These direct
A/V jacks will also provide better picture results than
using the RF jack on the rear panel.
This unit allows you to copy the contents of a DVD to a
VHS tape.
Note
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs. “Lock” is
displayed in the display window.
Connect the Camcorder’s (or Another VCR’s)
A/V outputs to your DVD+VCR as illustrated on
page 13.
1
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
1
Set the input channel “LINE2”. (press INPUT
2 SELECT to select LINE2.)
Insert VHS Tape
ꢀ If you have connected your DVD+VCR to the A/V
input jacks on the rear of DVD+VCR, you should
select the input channel LINE1 by pressing INPUT
SELECT twice.
2 Insert a blank VHS video tape into the VCR deck.
Press PLAY on the DVD deck.
3 The DVD will go into play mode
ꢀ If the DVD disc menu appears, you may need to press
the PLAY manually to begin copying.
Play the tape in the camcorder (or another
3 VCR). If you have a TV attached to your
DVD+VCR, you can see the video playing.
Press REC on the VCR deck.
ꢀ The DVD+VCR will go into Record mode.
ꢀ “REC” indicator will light.
When your desire recording begins, press
4
4 DVD+VCR’s REC/OTR once to start.
Note
Before recording, please confirm the recording start position.
Stop the Copy Process
5 When the DVD has finished playing, press STOP (x) to
stop the DVD playback. The recording on the VCR will be
stopped automatically.
Note
In case of insufficient tape length, the DVD+VCR will automati-
cally rewind the tape to the beginning and be ejected. it also
stops the DVD playback.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
VHS Hi-Fi Stereo System/
MTS Broadcast
MTS (Multi-Channel TV Sound)
This DVD+VCR will decode MTS stereo and bilingual
(SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies,
as long as they operate on assigned cable frequencies
and use the EIA-recommended MTS stereo/bilingual TV
sound system.
This DVD+VCR is equipped with the VHS Hi-Fi audio
sound system for recording and playback. The informa-
tion below gives a brief description of Hi-Fi audio and
how to record and play a tape in the Hi-Fi audio mode.
Playback with Hi-Fi Stereo Audio Sound
Multichannel TV Sound Indicator (MTS)
Shows Onscreen as illustrated below when ENTER is
A stereo TV with AUDIO/VIDEO input jacks or a stereo
audio system is required for true stereo playback. To
experience the full and rich stereo sound available with
Hi-Fi recorded tapes, we recommend the connection of
this unit to a home stereo audio system.
pressed.
ꢀ
One or both of the indicators will light, depending on the
MTS broadcast.
TV screen
STEREO
CH 4
STEREO/SAP
Lights up when a stereo broadcast
is being received.
SAP
Set the AUDIO MODE option to HI-FI on the
SETUP menu .
1
Lights up when a SAP BILINGUAL
broadcast is being received.
If only STEREO appears on the TV screen.
The DVD+VCR can record in stereo onto the VHS Hi-Fi audio
tracks when the BROADCAST TYPE option is in the STEREO
position. The DVD+VCR will also record mono audio onto the
mono audio track.
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
Set the AUDIO OUTPUT option to STEREO
2 position.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired
recording mode (STEREO or SAP).
(STEREO) POSITION: The left channel sound (L) is
heard from the left speaker and the right channel sound
(R) is heard from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard
from both speakers.
(RIGHT) POSITION: The right channel sound (R) is heard
from both speakers.
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
When the station broadcasts a Second Audio Program,
follow the procedure below to record the SAP.
Insert a video cassette with the safety tab intact.
1
Set the BROADCAST TYPE option to SAP
2 (SETUP menu).
Do this if only the SAP appears on the TV screen or you
know the program will use the SAP.
Press VCR MENU.
3
Insert a cassette and press PLAY.
4 Adjust volume at your stereo system.
Press VCR MENU.
3
Set the desired recording speed (SP or SLP) by
4 pressing SP/SLP.
Select the desired channel. The SAP should
5 appear on the TV screen.
6
Press REC/OTR once
You are now recording the program you see and hear on the
TV.
Press STOP to stop recording.
7
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Tape Counter Memory Feature
Additional Information
ꢀ
ꢀ
ꢀ
ꢀ
In manual recording, Timer recording, One-touch Timer
Recording, playback, or fast forward modes, the DVD+VCR
automatically starts rewinding the tape at the end of the
tape. The cassette will stop at the beginning of the tape and
be ejected, and the DVD+VCR will turn itself off.
Real-Time Counter
Shows length of tape run in hours, minutes, and sec-
onds. Press CLK/CNT to select the real-time counter
display.
Every press of CLK/CNT changes the TV screen as
illustrated below.
After you have finished using the DVD+VCR, rewind, eject,
and remove the cassette. Place the cassette in its protec-
tive sleeve to protect it from dust. It is not necessary to
rewind the cassette before removing it, but if you do, it will
be ready to play or record the next time you use it.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
Be sure the DVD+VCR Channel Selector is on the correct
channel you wish to record. The channel that is being
recorded can always be checked by setting the television
on the DVD+VCR channel (3 or 4) and pressing the
TV/VCR selector to turn the DVD+VCR’s TV indicator off.
REMAINING TIME
ꢀ
ꢀ
ꢀ
Counter changes to “0:00:00” when the cassette is
ejected.
The real-time counter does not operate if nothing is record-
ed on the tape.
The real-time counter will not work unless a tape is
inserted.
Do not attempt to hook up more than one television set to
the DVD+VCR for either recording or playback.
S-VHS Quasi Playback (SQPB)
ꢀ
Counter Memory Function
This DVD+VCR can also play back a tape which is record-
ed in S-VHS playback picture.
This is useful if there is a section of tape you want to
view immediately after recording or if you want to return
to the same point several times.
ꢀ
ꢀ
This DVD+VCR cannot record in S-VHS format
SQPB is an abbreviation for S-VHS Quasi Playback.
Begin recording or playing a tape.
1
Auto Play System
This DVD+VCR features automatic playback.
Load a cassette (with the safety tab removed).
Press CLK/CNT repeatedly to display the real-
2 time counter appears on the TV screen.
At the point that you want locate later, reset the
3 real-time counter to “0:00:00” by pressing
COUNTER RESET.
ꢀ
ꢀ
ꢀ
ꢀ
The Output Source is changed to VCR mode automattically.
The power turns on automatically and playback begins.
At the end of the tape, the DVD+VCR stops, then rewinds.
The cassette is ejected after rewinding and goto standby.
Continue to play or record.
4
5 es.
LOAD
AUTO
Press STOP when recording or playback finish-
AUTO
POWER
OFF
AUTO
PLAY
AUTO
REWIND
TAPE
EJECT
Press REW.
6 The tape automatically stops when the tape counter
returns to about “0:00:00”.
Video Head Cleaning
ꢀ
Whenever a video cassette is inserted into or ejected from
this unit the video head is automatically cleaned.
Tape Remaining
This function allows the time of the remaining tape to be
displayed during recording or playback.
Press CLK/CNT until the REM indicator displays on the
TV screen during recording or playback.
ꢀ
However, it is possible that the heads may become clogged
when playing an old or damaged tape. If the image on your
screen resembles the picture on the left while playing back
a tape, the heads may require cleaning.
ꢀ
To clean the heads, obtain a head cleaning tape from your
local video dealer. Follows the instructions that come with
the cleaning tape, as excessive use can shorten head life.
Note
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind of
the tape (T-140, T-160, or T-210 etc)
Blank Search
The Blank Search enables you to locate the end of any
recording. Whenever a recording creates, a blank con-
tent is recorded on the tape.
Press BLANK SEARCH during playback or in the stop
mode and rapidly advanced to find blank content.
To find next blank content, press BLANK SEARCH
again.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
Playing a DVD and Video CD
General Features
VCD2.0
VCD1.1
Playback Setup DVD
Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
ꢀ Turn on the TV and select the video input source
connected to the DVD+VCR.
ꢀ Audio system: Turn on the audio system
and select the input source connected to the
DVD+VCR.
1/3
Moving to another TITLE DVD
Press OPEN/CLOSE Z to open the disc tray.
When a disc has more than one title, you can move to
another title as follows:
ꢀ Press DISPLAY, then press the appropriate
numbered button (0-9) to select a title number.
1
Load your chosen disc in the tray, with the play-
2 back side down.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
Moving to another CHAPTER/TRACK
Press OPEN/CLOSE Z to close the tray.
3 READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY N.
1/12
1/3
VCD1.1
DVD
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
In some cases, the disc menu might appear
instead.
ꢀ Press SKIP > or .briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
To stop the playback, press STOP x.
4 Then press OPEN/CLOSE Z on the unit.
The disc tray opens.
ꢀ Press SKIP . twice in quick successions to step
back to the previous chapter/track.
ꢀ To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
Remove the disc and press OPEN/CLOSE Z on
the unit then press ON/STANDBY +/1.
The disc tray closes automatically and unit turns off.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
Note
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
DVD
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER to start
playback.
Press TOP MENU or MENU to return to the menu
screen.
VCD2.0
VCD1.1
Search DVD
1 Press REW m or FF M during playback.
The player will now go into SEARCH mode.
2 Press REW m or FF M repeatedly to select the
required speed:
VCD2.0
ꢀ Use the number buttons to select the track you want
to view.
mX2, mX4, mX16, mX100 (backward) or
MX2, MX4, MX16, MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2, MX4,
MX8 (forward).
Press RETURN to return to the menu screen.
ꢀ Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
19.
3 To return to playback, press PLAY N.
Still Picture and Frame-by-Frame Playback
VCD2.0
VCD1.1
DVD
Notes
1 Press PAUSE/STEP X/C during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP X/C repeatedly on the remote
control.
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 20).
– DVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 1 (one).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
VCD2.0
VCD1.1
DVD
General Features (continued)
Repeat A-B
A
*
A
B
OFF
VCD2.0
VCD1.1
DVD
Slow Motion
1 Press SLOW T during playback or still mode.
The player will enter SLOW mode.
To repeat a sequence in a title:
1 Press A-B RPT at your chosen starting point.
“A ” appears briefly on the TV screen.
2 Press SLOW T repeatedly to select the required
speed : T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY N.
*
2 Press A-B RPT again at your chosen end point.
“A B” appears briefly on the TV screen, and the repeat
sequence begins (“A y B” appears the display window).
VCD2.0
VCD1.1
Karaoke DVD
Random
3 To cancel the sequence, press A-B RPT.
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM” appears on the TV screen.
0:16:57
- : - - : - -
DVD
Time Search
2 To return to normal playback, press RANDOM again
until “NORMAL” appears on the TV screen.
The Time Search function allows you to start playing at
any chosen time on the disc.
Tip
1 Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
By pressing SKIP . or > during Random play-
back, the unit selects another title (track) and resumes
Random playback.
2 Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
Notes
ꢀ This function only works with DVD karaoke discs and
video CD without PBC.
ꢀ On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See
page 19.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and
seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD2.0
VCD1.1
DVD
Repeat
4 Within 10 seconds, press ENTER to confirm the start
time.
ALL
TRACK
OFF
CHAPT
TITLE
Playback starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the current
point.
DVD Video Discs - Repeat Chapter/Title/Off
VCD2.0
VCD1.1
DVD
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
3D Surround
NORM.
3D SUR
DIALOGUE
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
multi-channel audio from a home theater system.
Video CDs - Repeat Track/All/Off
1 Press DISPLAY during playback.
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 Use v/V to select the sound icon.
The sound option will be highlighted.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3 Use b/B to select “NORM.”, “3D SUR”
or “DIALOGUE”.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
“DIALOGUE” is only applicable to DVD discs.
Note
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Repeat function. See page
19.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
General Features (continued) Special DVD Features
DVD
VCD2.0
VCD1.1
Checking the contents of DVD Video
discs: Menus
Zoom DVD
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU.
Then, press the appropriate number button to select an
option. Or, use the b/B/v/V buttons to highlight your
selection, then press ENTER.
1 Press ZOOM during playback or still playback to
activate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increase up to six steps
2 Use the b B v V buttons to move through the
zoomed picture.
DVD
Title Menu
1 Press TOP MENU.
3 Press CLEAR to resume normal playback or return to
the paused image.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
Note
The zoom function may not work for some DVDs.
3 To remove the title menu, press TOP MENU again.
DVD
Disc Menu
1 Press MENU.
The disc menu is displayed.
VCD2.0
VCD1.1
DVD
Marker Search
MARKER SEARCH
1/9
2 To remove the disc menu, press MENU again.
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1/1
DVD
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon blinks on the TV screen.
You can then change the camera angle if you wish.
1 During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
ꢀ
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
DVD
Changing the Audio Language
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
1
ENG
D
5.1 CH
2 Within 10 seconds, press b/B to select a Marker
number that you want to recall.
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
3 Press ENTER.
Playback will start from the Marked scene.
Changing the Audio Channel
4 To remove the MARKER SEARCH menu, press
SEARCH.
RIGHT
STER.
LEFT
VCD2.0
VCD1.1
To clear a Marked Scene
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STEREO, LEFT or RIGHT).
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
1
ENG
DVD
Subtitles
2 Within 10 seconds, press b/B to select a Marker
number that you want to erase.
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
Note
If
appears, the feature is not available on the disc.
5 To remove the MARKER SEARCH menu, press
SEARCH.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
Notes on MP3/WMA Recordings
CD
MP3
About MP3
WMA
ꢀ An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
ꢀ The player cannot read an MP3 file that has a file
extension other than “.mp3”.
The DVD Player can play MP3/WMA formatted record-
ings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
Insert a disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen go to step 2.
1
About WMA(Window Media Audio)
ꢀ An WMA file is a Microsoft audio compression
technology.
ꢀ WMA(Windows Media Audio) offers double the audio
compression of the MP3 format.
MP3 WMA
JPEG
MP3/WMA Disc compatibility with this player is
limited as follows:
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
Use v/V to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
2
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use “Easy-
CD Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.MP3” or “********.WMA”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
Program
MP3 WMA
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Clear All
OFF
00:00
Use v/V to select a folder then press ENTER.
3 A list of files in the folder appears.
Use v/V to select a track then press PLAY N
4
or ENTER.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
This DVD+VCR requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Program
Program
MP3 WMA
CD
TRACK01
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
Clear All
OFF
Clear All
NORM.
00:00
1
0: 56: 18
STER.
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
Audio CD Menu
MP3/WMA Menu
Tip
If you are in a file list and want to return to the Folder
list, use the v/V to highlight and press ENTER to
return to the previous menu screen.
To stop playback at any other time, press
5 STOP x.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio CD and MP3/WMA Disc (Continued)
CD
MP3
CD
WMA
Pause
1 Press PAUSE/STEP X/C during playback.
Repeat A-B
To repeat a sequence.
1 During disc playback, press A-B RPT at your chosen
starting point.
2 To return to playback, press PLAY N or press
PAUSE/STEP X/C again.
The Repeat icon and “
” appears on the menu screen.
A
*
CD
ꢀ Press SKIP > or . briefly during
playback to go to the next track or to return to the
beginning of the current track.
MP3
2 Press A-B RPT again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
WMA
Moving to another Track
3 To exit the sequence and return to normal play, press
A-B RPT again.
The Repeat icon and “OFF” appears on the menu screen.
ꢀ Press SKIP . twice in quick successions to step
back to the previous track.
ꢀ In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
CD
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
CD
MP3
WMA
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
1 Press DISPLAY or AUDIO during playback.
2 Use b/B to select the sound icon.
The sound option will be highlighted.
2 To repeat all tracks on a disc, press REPEAT a
second time.
The Repeat icon and “ALL” appears on the menu screen.
3 Use v/V to select “NORM.”, or “3D SUR”.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
CD
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
CD
MP3
WMA
Search
1 Press REW m or FF M during playback.
The player will now go into SEARCH mode.
2 Press REW m or FF M repeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3 To exit SEARCH mode, press PLAY N.
CD
MP3
WMA
Random
1 Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
“RAND.” appears on the menu screen.
2 To return to normal playback, press RANDOM.
“RAND.” disappears on the menu screen.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with JPEG Disc
JPEG
Moving to another File
Press SKIP . or > once during viewing a picture
to advance to the next file or to the previous file.
Viewing a JPEG disc
This DVD+VCR can play discs with JPEG files. Before
playing JPEG recordings, read the notes on JPEG
Recordings on right.
Still Picture
Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the
TV screen.
1 Press PAUSE/STEP X/C during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY N or press
PAUSE/STEP X/C again.
1
MP3 WMA
JPEG
To flip the picture
Press v/V to select the JPEG then press
2 ENTER.
Press v/V during showing a picture to flip the
picture horizontally or vertically.
The JPEG menu appears on the TV screen.
JPEG
To rotate picture
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Press b/B during showing a picture to rotate the
picture clockwise or counter clockwise.
Off
Slide Speed
Notes on JPEG Recordings
ꢀ Depending upon the size and number of the JPEG
files, it could take a long time for the DVD+VCR to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the files
are too big — reduce the resolution of the JPEG files
to less than 2 mega pixels and burn another disc.
Press v/V to select a folder then press ENTER.
3 A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
Tip
If you are in a file list and want to return to the Folder
list, use the v/V buttons on the remote to highlight
ꢀ Total number of files and folders on the disc should
be less than 650.
“
previous menu screen.
and press ENTER to return to the
”
ꢀ Some disc may be incompatible due to different
recording format or condition of disc.
ꢀ When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure
that all the selected files have the “.jpg” extensions
when copying into the CD layout.
If you want to view a particular file, press v/V
4 to highlight a file and press ENTER or
PLAY N.
Viewing the file proceeding starts.
ꢀ If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
During viewing a file, press RETURN to move to
the previous menu (JPEG menu).
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
ꢀ File names without “.jpg” extension will not be able to
be read by this DVD+VCR. Even though the files are
shown as JPEG image files in windows explorer.
Folder1
JPEG
Picture1
Picture2
Picture3
Picture4
Picture5
Picture6
Picture7
5/32
1024X768 Picture5.jpg
Off
5/32
1024X768
Slide Speed
Tip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
Speed then press 3/4 to select the option you want to
use, and press ENTER.
To stop viewing at any other time,
5 press STOP x.
The JPEG menu appears.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD2.0
VCD1.1
CD
MP3
WMA
Programmed Playback
Insert Video CD and close the tray.
Programmed Playback with
Audio CD and MP3/WMA Disc
1
2
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
The Program function enables you to store your favorite
tracks from any disc in the player memory.
Program
E
VCD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Program can contain 30 tracks.
Clear All
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
1
E
The mark will appear to the right of the word Program
on the right side of the menu screen.
Note
Press RETURN or PROGRAM to exit the Program menu.
Note
Press PROGRAM to exit the Program Edit mode;
Follow steps 2-5 of “Programmed Playback with
3 Audio CD and MP3/WMA disc” on left.
E
the
mark will disappear.
Press PLAY N or ENTER to start.
Playback begins in the order in which you programmed
4
Select a track, then press ENTER to place the
2 selected track on the Program list.
the tracks. “PROGRAM” indicator will appear briefly on the
TV screen.
Playback stops after all of the tracks on the Program list
have played once.
Repeat step 2 to place additional tracks on the
3 Program list.
To resume normal playback from
5 programmed playback, press PROGRAM.
E
Program
E
Program
MP3 WMA
CD
TRACK 1
TRACK 12
TRACK 8
TRACK 10
TRACK 3
FILE 8
FILE 2
FILE 4
FILE 3
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
“NORMAL” indicator will appear briefly on the TV screen.
Repeat Programmed Tracks
Clear All
NORM.
Clear All
OFF
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
0: 56: 18
STER.
00:00
3
Audio CD Menu
MP3/WMA Menu
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
Press B.
The programmed track you selected last is highlighted on
the program list.
4
Press v/V to select the track you want to start
5 playing.
Erasing a Track from Program List
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the stop mode to enter the
Press PLAY N or ENTER to start.
Playback begins in the order in which you programmed
the tracks and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
Program Edit mode.
E
6
7
The
mark will appear.
2 Press 2 to move to the Program list.
3 Use 3/4 to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
To resume normal playback from programmed
playback, press PROGRAM.
Select a track of CD (or MP3/WMA) list and then
press ENTER.
“PROG.” indicator disappears from the menu screen.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use 3/4 to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
Programmed Playback with Video CD
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 19.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operation
One Touch Replay
Press INSTANT REPLAY during playback and the disc
will reverse picture search through 10 seconds of play-
back. And then the playback will start from the point
again.
Screen Saver
A screen saver image appears when you leave the DVD
Player in stop mode for about five minutes.
Video Mode Setting DVD
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
ꢀ To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode selected is displayed on the TV
screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
ꢀ Video mode sequence:
Auto
Film
Video
Auto
→
→
→
ꢀ If you turn off the power, the video mode will return to
initial default state (Auto).
Detailed Description of each Video Mode
Auto : The source material of the DVD video (film material or
video material) is determined from disc information.
Film : Suitable for playing film based content or video based
material recorded by the progressive scan method.
Video : Suitable for playing video based content with
comparatively little motion.
Note
The video mode setting only works when the
Progressive Scan mode is set to “On” on the setup menu.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your TV with the Supplied Remote
The remote control can be compatible with various
brands of TV/Cable box/DSS satellite receiver by setting
their control codes. The TOSHIBA code has initially
been set to control TOSHIBA TVs.
DISPLAY
INPUT SELECT
TV
Setting TV Control Codes
1. Press TV to set the remote control operating
your TV.
2. While holding down PROGRAM button, enter
the two digits of your TV’s brand code (listed on
page 37) using number buttons.
POWER
PROGRAM
3. Release PROGRAM.
Number
buttons
By pressing
POWER
You can
Turn the TV on or off.
100
CH/TRK +/–
To select TV channels in the upper
or lower direction.
VOL +/–
Adjust the volume of the TV.
Number buttons
To select TV channels.
When selecting channels 1 to 9,
first enter 0 and then the desired
number.
100
To substitute for 100 channel key.
DISPLAY
To turn on or off TV’s screen
display.
INPUT SELECT
Switch the TV’s input source
between the TV and other input
sources.
CH/TRK, VOL
ENTER
Important
Some TV’s may not respond to all the operations
above, or may not be operated at all with this
remote control. In this case, operate your TV with
its own remote control.
Note
ꢀ For some brands, several control codes (brand
codes) are allocated. Try each of them until the but-
tons work on your TV.
ꢀ If you replace the remote control’s batteries, set the
brand code again.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your TV with the Supplied Remote (Continued)
Table of TV Brand Codes
Brand name of your TV
Toshiba
Bell & Howell
Carver
Brand Code
Brand name of your TV
Runco (NEC)
Samsung
Sanyo
Brand Code
14
01
11,12
09
09
10
Scotch
11
Celebrity
Citizen
03
Scott
11
12
Curtis Mathes
Dumont
Electro band
Emerson
Fisher
09, 12
Sears
01, 02, 09, 10, 11
14
Sharp
08, 13
03
Sony
03
09, 11
Soundesign
Supreme
Sylvania
Tandy
11
09
03
GE
02, 07, 11
10
Gibraiter
Goldstar
Hallmark
Hitachi
14
08
11
Technics
Techwood
Teknika
TMK
07, 15
11
07
06
04, 10, 12
Infinity
10
JBL
10
11
JCB
03
Victor
05
JVC
05
Vidikron
Vidtech
Wards
10
LXI
01, 02, 09, 10, 11
11
Magnavox
Marantz
Megatron
Memorex
MGA
10
10, 11, 13
14
10
Zenith
06, 11
04, 09, 11
04, 11
Midland
Mitsubishi
Motorola
MTC
02, 07, 14
04, 11
08
12
NAD
01, 11
Nikko
11
Optimus
Optonica
Panasonic
Penney
Philco
09
08
07, 10, 15
01, 02, 07, 11, 12
10
Philips
10
Pioneer
Princeclub
Prism
16
12
07
Proscan
Proton
02
11
Pulser
14
Quasar
Radio Shack
RCA
07, 15
13
02
Realistic
09, 11, 13
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your Cable Box/DSS® Satellite Receiver
Setting Cable Box/DSS® Satellite
Receiver Control Codes
1. Press CABLE BOX to set the remote control
operating your Cable box/DSS® Satellite
Receiver.
CABLE BOX
POWER
2. While holding down PROGRAM button, enter the
two digits of your Cable box/DSS® Satellite
Receiver Brand Code (listed on page 39) using
number buttons.
PROGRAM
Number
buttons
3. Release PROGRAM.
Point the remote control at your Cable box/DSS® satel-
lite Receiver and use each button listed below to make
sure that your Cable box/DSS® satellite receiver is oper-
ated correctly.
100
By pressing
You can
Turn the Cable box/DSS® satellite
receiver on or off.
POWER
CH/TRK +/–
To select Cable box/DSS® satellite
receiver channels in the upper or
lower direction, (Not applicable to
some brands of Cable box/DSS®
satellite Receiver.)
CH/TRK
ENTER
Number buttons
ENTER
To select desired channels to
record.
To use for the Cable box’s Enter
Key.
(Some cable boxes require you to use 100 button as
the enter button.)
Important
Some Cable box/DSS® satellite receiver may not
respond to all the operations above, or may not be
operated at all with this remote control. In this
case, operate them with its own remote control.
Note
ꢀ For some brands, several control codes (brand
codes) are allocated. Try each of them until the but-
tons work on your TV.
ꢀ If you replace the remote control’s batteries, set the
brand code again.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your Cable Box/DSS® Satellite Receiver (Continued)
Table of Cable Box Brand Codes
Brand name of your Cable box
Brand Code
Brand name of your Cable box
Brand Code
Toshiba
Anvision
36
Stargate
4, 6, 30, 32, 42, 44, 52,
63, 78, 88
13, 20, 21, 22, 23, 24,
25, 26, 58, 62, 84
Sylvania
Teknika
19
Archer
1, 20, 21, 29, 42, 44,
63, 88, 91
74
Telecaption
Teleview
Texscan
Tocom
77
Cablestar
13, 20, 21, 22, 23, 24,
25, 26, 58, 62, 84
4, 6, 32, 42, 78
18, 19
Cableview
Citizen
30, 42, 44, 52, 63, 88
30, 42, 44, 52, 63, 88
8, 9, 56, 61
1, 33, 34, 42, 48, 49,
73, 91
Curtis
Unika
1, 20, 21, 29, 42, 44,
63, 88, 91
Diamond
1, 20, 21, 29, 42, 44,
63, 88, 91
Universal
29, 42, 43, 44, 52, 63,
82, 88
Eagle
13, 20, 21, 22, 23, 24,
25, 26, 58, 62, 84
Videoway
Viewstar
7, 23, 45, 50, 84
Eastern
26, 28
13, 20, 21, 22, 23, 24,
25, 26, 58, 62, 84
GC Brand
Gemini
30, 42, 44, 52, 63, 88
4, 30, 85
Warner Amex
Zenith
6
General Instrument
1, 2, 3, 4, 31, 34, 55,
83, 85, 91
7, 23, 45, 50, 84
Hamlin
Hitachi
Jerrold
14, 15, 28, 41
31, 79, 80
1, 2, 3, 4, 31, 34, 55,
85, 91
Table of DSS® Satellite Receiver Brand
Codes
Macom
31, 79, 80
Magnavox
13, 20, 21, 22, 23, 24,
25, 26, 58, 62, 84
Brand name of your DSS® satellite receiver
Brand Code
99
Movietime
NSC
29, 32, 38, 39, 42, 44,
88
TOSHIBA
RCA
29, 32, 38, 39, 42, 44,
88
98
SONY
97
OAK
10, 11, 12, 13, 46
10, 11, 12, 13, 46
6, 8, 16, 17
PANASONIC
MAGNAVOX
DRAKER
PRIMESTAR
HITACHI
90
OAK Sigma
Panasonic
Philips
95, 96
94
4, 13, 20, 21, 22, 23,
24, 25, 26, 58, 62, 84
93
92, 89
Pioneer
Pulsar
5, 6, 78
30, 42, 44, 52, 63, 88
Randtek
13, 20, 21, 22, 23, 24,
25, 26, 58, 62, 84
RCA
6, 8, 16, 17
44, 88
Realistic
Regal
14, 23, 41, 84
26, 28
Regency
Rembrandt
29, 32, 38, 39, 42, 44,
88
Samung
4, 6, 32, 42, 78
8, 9, 56, 61
27
Scientific Atlanta
Sheritech
SL Mark
4, 6, 32, 42, 78
6, 8, 16, 17
Sprucher
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The power is on, but the
DVD+VCR does not
work.
ꢀ The TV is not set to receive DVD+VCR
signal output.
ꢀ Select the appropriate video input mode
on the TV so the picture from the
DVD+VCR appears on the TV screen.
No picture.
ꢀ TV/VCR mode for DVD+VCR is set to
TV.
ꢀ Press the TV/VCR button on the remote
control repeatedly to choose VCR
mode. TV indicator disappears in the
display window.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive
DVD+VCR signal output.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cable securely.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The Digital Audio Output is set to the
wrong position.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the
DVD+VCR again by pressing POWER.
The playback picture is
poor.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ Tape heads are dirty.
ꢀ Clean video heads.
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ Use CH/TRK (+/-) for manual tracking
adjustment while tape is playing.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The DVD+VCR does not
start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional code.)
ꢀ The disc is placed upside down.
ꢀ
Place the disc with the playback side down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control does ꢀ The remote control is not pointed at the
ꢀ Point the remote control at the remote
sensor of the DVD+VCR.
remote sensor of the DVD+VCR.
not work properly.
ꢀ The remote control is too far from the
DVD+VCR.
ꢀ Operate the remote control within 23 ft
(7 m).
ꢀ There is an obstacle in the path of the
remote control and the DVD+VCR.
ꢀ Remove the obstacle.
ꢀ The batteries in the remote control are
exhausted.
ꢀ Replace the batteries with new ones.
ꢀ This remote control use the same
buttons for VCR and DVD functions
(ex. PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Cause
Correction
Symptom
ꢀ Those channels were deleted with the
CH. ADD/DEL option.
ꢀ Use CH. ADD/DEL. to restore channels.
See “Channel Selection” on page 15.
Some channels are
skipped over when
using CH/TRK (+/-)
ꢀ Antenna or cables are loose.
ꢀ Tighten connections or replace cable.
Picture and sound of
broadcasting channel
are weak or missing.
ꢀ Wrong TUNING BAND option is being
used.
ꢀ Try all TUNING BAND options. See
“Channel Selection” on page 15 for
details.
ꢀ Camcorder is off.
ꢀ Turn camcorder on and operate
properly.
Camcorder image is not
shown.
ꢀ DVD+VCR SOURCE SELECT is not set ꢀ Press INPUT SELECT to select LINE
Camcorder image via
A/V input to DVD+VCR
is not shown on TV
screen.
to LINE1 or LINE2.
input channel (LINE1 or LINE2).
ꢀ Clock in DVD+VCR is not set to correct
time.
ꢀ Set clock to correct time. See “Setting
the Clock” on page 16.
Timer recording is not
possible.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer. See “Timer
Recording” on page 23.
ꢀ TIMER indicator does not appear after
programming timer.
ꢀ Reprogram Timer
ꢀ DVD+VCR is in Timer Recording mode. ꢀ This is the normal indication that the
DVD+VCR is in TIMER mode.
TIMER indicator
appears after DVD+VCR
is turned off.
Stereo Audio Record
and/or Playback is not
present.
ꢀ TV is not Stereo-compatible.
ꢀ No action is possible.
ꢀ Broadcast program is not in stereo for-
mat.
ꢀ No action is possible.
ꢀ DVD+VCR A/V Out jacks are not con-
nected to TV A/V In jacks.
ꢀ Make A/V connections. Stereo is
available only via A/V output from
DVD+VCR.
ꢀ DVD+VCR Audio/Video Out is not
selected for viewing at the TV.
ꢀ Select AUX or A/V source as TV input.
ꢀ DVD+VCR BROADCAST TYPE mode is ꢀ Set BROADCAST TYPE mode to
set to SAP or MONO.
STEREO. See “Setting the VCR Setup
Menu” on page 15.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 18).
Code Language
Code Language
Code Language
Code Language
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Abkhazian
Afar
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Fiji
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Lingala
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Amharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Sanskrit
Danish
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faeroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Country/Area Code List
Enter the appropriate code number for the initial setting “Area Code” (See page 20).
Code Country/Area
Code Country/Area
Code Country/Area
Code Country/Area
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
LC
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Spain
LI
Ethiopia
LK
Sweden
Finland
LR
Singapore
FJ
Fiji
LS
Lesotho
Saint Helena
Slovenia
AL
Albania
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
LT
Lithuania
AM
AN
AO
AQ
AR
AS
AT
Armenia
LU
Luxembourg
Latvia
SJ
Svalbard and Jan Mayen
Islands
Netherlands Antilles
Angola
LV
LY
Libya
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
Slovak Republic
Sierra Leone
San Marino
Senegal
Antarctica
Argentina
France (European
Territory)
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Morocco
Monaco
American Samoa
Austria
GA
GB
GD
GE
GF
GH
GI
Gabon
Moldavia
Great Britain
Grenada
Madagascar
Marshall Islands
Macedonia
Mali
Somalia
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
Australia
Suriname
Aruba
Georgia
Saint Tome and Principe
Former USSR
El Salvador
Syria
Azerbaidjan
Bosnia-Herzegovina
Barbados
French Guyana
Ghana
Myanmar
Mongolia
Gibraltar
Bangladesh
Belgium
GL
GM
GN
GP
GQ
GR
GS
Greenland
Gambia
Macau
Swaziland
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Turks and Caicos Islands
Chad
Burkina Faso
Bulgaria
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
French Southern
Territories
Bahrain
Burundi
TG
TH
TJ
Togo
BJ
Benin
S. Georgia & S. Sandwich
Isls.
Mauritius
Thailand
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
Bermuda
Maldives
Tadjikistan
Tokelau
Brunei Darussalam
Bolivia
GT
GU
GW
GY
HK
HM
Guatemala
Guam (USA)
Guinea Bissau
Guyana
MW Malawi
TK
TM
TN
TO
TP
TR
TT
MX
MY
MZ
NA
NC
NE
NF
NG
NI
Mexico
Turkmenistan
Tunisia
Brazil
Malaysia
Bahamas
Mozambique
Namibia
Tonga
Bhutan
Hong Kong
Heard and McDonald
Islands
East Timor
Turkey
Bouvet Island
Botswana
New Caledonia (French)
Niger
Trinidad and Tobago
Tuvalu
Belarus
HN
HR
HT
HU
ID
Honduras
Croatia
Norfolk Island
Nigeria
TV
TW
TZ
Belize
Taiwan
Canada
Haiti
Nicaragua
Netherlands
Norway
Tanzania
Cocos (Keeling) Islands
Central African Republic
Congo
Hungary
NL
NO
NP
NR
NU
NZ
OM
PA
UA
UG
UK
UM
Ukraine
Indonesia
Ireland
Uganda
IE
Nepal
United Kingdom
USA Minor Outlying
Islands
Switzerland
Ivory Coast
Cook Islands
Chile
IL
Israel
Nauru
IN
India
Niue
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
IO
British Indian Ocean
Territory
New Zealand
Oman
US
UY
UZ
VA
VC
United States
Uruguay
Cameroon
China
IQ
Iraq
Panama
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
IR
Iran
PE
PF
PG
PH
PK
PL
Peru
Colombia
IS
Iceland
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
Costa Rica
Former Czechoslovakia
Cuba
IT
Italy
JM
JO
JP
KE
KG
KH
KI
Jamaica
VE
VG
VI
Jordan
Cape Verde
Christmas Island
Cyprus
Japan
Poland
Kenya
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Vanuatu
Czech Republic
Germany
Wallis and Futuna Islands
Samoa
Djibouti
KM
KN
KP
KR
KW
KY
KZ
LA
LB
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
Palau
Yemen
DK
DM
DO
DZ
EC
EE
EG
EH
Denmark
Paraguay
Mayotte
Dominica
Qatar
Yugoslavia
South Africa
Zambia
Dominican Republic
Algeria
Reunion (French)
Romania
Ecuador
Cayman Islands
Kazakhstan
Laos
Russian Federation
Rwanda
Zaire
Estonia
Zimbabwe
Egypt
Saudi Arabia
Solomon Islands
Western Sahara
Lebanon
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
AC 120V , 60 Hz
19W
430 X 78.5 X 275 mm (16.9 X 3.1 X 10.8 inches) (w x h x d)
8.8 lbs (4.0 kg)
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Signal system
NTSC
Inputs
ANTENNA IN
VHS VIDEO IN (LINE1, 2)
VHS AUDIO IN (LINE1, 2)
75 ohms (VHF/UHF/CATV)
1 Vp-p 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 kohms, RCA jack (L, R) x 2
Outputs
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
COMPONENT VIDEO OUT
(Progressive Scan)
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
RF OUT
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
5 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1
Channel 3 or 4 (Switchable)
VCR Specifications
Head system
Timer
Tape speed
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
Tape width
Maximum recording time
Rewind time
Antenna
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
75 ohms (VHF/UHF)
VHF output signal
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
Channel 3 or 4 (Switchable)
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20Hz to 20kHz
More than 43dB
More than 88 dB
More than 60 dB
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT jacks only)
Less than 0.008%
More than 95 dB (DVD/CD)
Accessories:
Video cable x 1, Audio cable x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries(AAA) x 2
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States Warranty
DVD/VCR COMBINATION - Exchange Warranty
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers
in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER
OR ANY PERSON RECEIVING THIS DVD/VCR COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WAR-
RANTIES
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WAR-
RANTIES.
Limited Ninety (90) Day Warranty
Owner’s Manual and Demographic Card
TACP warrant this DVD/VCR COMBINATION and its
parts against defects in materials or workmanship for a
period of ninety (90) days after the date of original retail
purchase. DURING THE FIRST 90 DAYS FROM THE
PURCHASE DATE, TACP WILL EXCHANGE A DEFEC-
TIVE DVD/VCR COMBINATION WITH A NEW OR
REFURBISHED PLAYER WITHOUT CHARGE TO
YOU. YOU MUST CONTACT TOSHIBA’S CONSUMER
SOLUTIONS CENTER FOR INSTRUCTIONS ON HOW
TO PROCESS YOUR IN WARRANTY EXCHANGE
REQUEST. THE CONSUMER IS RESPONSIBLE FOR
ALL INBOUND TRANSPORTATION AND INSURANCE
CHARGES FOR THE DVD/VCR COMBINATION TO
THE EXCHANGE CENTER. DURING THE PERIOD
FROM 91 DAYS AND BEYOND, FROM THE PUR-
CHASE DATE, TACP WILL EXCHANGE A DEFECTIVE
DVD/VCR COMBINATION WITH A NEW OR REFUR-
BISHED PLAYER FOR A NOMINAL FEE. YOU MUST
CONTACT TOSHIBA’S CONSUMER SOLUTIONS
CENTER FOR INSTRUCTIONS ON HOW TO
You should read the owner’s manual thoroughly before
operating this DVD/VCR COMBINATION. You should
complete and mail the enclosed Demographic card
within ten days after you, or the person who has given
you this product as a gift, purchased this DVD/VCR
COMBINATION. This is one way to enable TACP to pro-
vide you with better customer service and improved
products. Failure to return the Demographic card will
not affect your rights under this warranty.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of
purchase.
(2) All warranty servicing of this DVD/VCR COMBINA-
TION must be made by an Authorized TACP Service
Station.
(3) The warranties from TACP are effective only if the
DVD/VCR COMBINATION is purchased and operat-
ed in the U.S.A. or Puerto Rico.
(4) Labor service charges for set installation. Set up,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.
PROCESS YOUR EXCHANGE REQUEST. THE CON-
SUMER IS RESPONSIBLE FOR ALL INBOUND
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD/VCR COMBINATION TO THE
EXCHANGE CENTER.
*Rental Units
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to
any DVD/VCR COMBINATION or parts which have
been lost or discarded by you or to damage to
DVD/VCR COMBINATION or parts caused by mis-
use, accident, Acts of God, such as lightning or fluc-
tuations in electric power, improper installation,
improper maintenance or use in violation of instruc-
tions furnished by TACP; or to units which have
been modified or had the serial number removed,
altered, defaced or rendered illegible.
The warranty for rental units begin with the first rental or
thirty (30) days from the date of shipment to the rental
firm, whichever comes first.
*Commercial Units
DVD/VCR COMBINATIONs sold and used for commer-
cial purposes have a limited ninety (90) day warranty for
all parts, labor.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Obtain Warranty Services
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE IN THE
U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, WHEN AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE AFOREMENTIONED LIMITATIONS OR EXCLU-
SIONS MAY NOT APPLY TO YOU UNDER SUCH CIR-
CUMSTANCES.
If, after following all of the operating instructions in this
manual and checking the section “Troubleshooting”, you
find that service is needed:
(1) For instructions on how to obtain warranty service
for exchange program DVD/VCR COMBINATIONs,
contact TACP’S toll free Call Center at 1-866-583-
7353.
(2) Include your bill of sale or other proof of purchase
along with the DVD/VCR COMBINATION, when
sending it to the Authorized TACP Service Station
SPECIFIED by transportation and insurance
charges for the DVD Product to and from the
Service Station.
For additional information, visit TACP’s web site:
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED WAR-
RANTIES SET FORTH ABOVE. WITH THE EXCEP-
TION OF ANY WARRANTIES IMPLIED BY THE LAW
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED,
THE FOREGOING WARRANTY IS EXCLUSIVE AND
IN LIEU OF ALL OTHER WARRANTIES, GUARAN-
TEES, AGREEMENTS AND SIMILAR OBLIGATIONS
OF TACP OR THI WITH RESPECT TO THE REPAIR
OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES.
No person, agent distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever, The time
within which action must be commenced to enforce any
obligation of TACP arising under this warranty or under
any law of the United States or of any state thereof is
hereby limited to 90 days from the date you discovered
or should have discovered, the defect. This limitation
does not apply to implied warranties arising under the
law of any state of the U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
P/NO: 3834RV0004G
Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
|