TP Link Wireless Office Headset TL SM221A User Manual

User Guide  
TL-SM221A / TL-SM221B  
100Base-BX WDM Bi-Directional SFP Module  
Rev:1.0.1  
7106503184  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC STATEMENT  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
¾
¾
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
¾
¾
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/ TV technician  
for help.  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
1)  
This device may not cause harmful interference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2)  
This device must accept any interference received,  
including interference that may cause undesired operation.  
Any changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate  
the equipment.  
CE Mark Warning  
This is a class B product. In a domestic environment, this product  
may cause radio interference, in which case the user may be  
required to take adequate measures.  
SAFETY NOTICES  
¾
Do not use this product near water, for example, in a wet  
basement or near a swimming pool.  
¾
Avoid using this product during an electrical storm. There may  
be a remote risk of electric shock from lightning.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
The following items should be found in your package:  
¾
¾
¾
Ten 100Base-BX WDM Bi-Directional SFP Modules  
Ten Static Shielding Bags  
This User Guide  
Note:  
)
Make sure that the package contains the above items. If any of the  
listed items are damaged or missing, please contact with your  
distributor.  
Chapter 1. Introduction  
TL-SM221 Series 100Base-BX WDM Bi-Directional SFP Module is a  
hot pluggable 3.3V SFP (Small-Form-Factor) Bi-Directional  
transceiver module, which adopts WDM (Wavelength Division  
Multiplexing) technology that increases the information carrying  
capacity of fiber via multiplex transmit and receive signals at  
different wavelengths on single strand cable. It’s designed expressly  
for high-speed communication applications that requires rates of up  
to 155Mbit/sec. It can effectively extend the diameter and bandwidth  
of the workgroup. TL-SM221 Series SFP Module can be installed  
inside the Switch which supplies power directly, it also can  
cooperate with TP-LINK products as the table below:  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
SFP Module  
Cooperated TP-LINK products  
TL-SG2216WEB Web Smart Gigabit Switch  
TL-SM221A  
TL-SM221B  
TL-SG2224WEB Web Smart Gigabit Switch  
) Note:  
If any abnormal status occurs when the light modules of the device  
are hot-switched between 1000Mbps and 100Mbps, please try to  
power on the device again.  
Chapter 2. Features of the product  
¾
Single-mode WDM Bi-Directional SFP Module operate at  
1550nm/1310nm  
¾
¾
¾
Bi-Directional transmit with one fiber which can save cost  
Single LC receptacle optical interface compliant  
The maximal transmission distance of Single-mode WDM  
Bi-Directional SFP Module is 15km  
¾
¾
¾
Hot-pluggable  
RoHS Compliant  
International Class 1 laser safety certified  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3. Installation Guide  
The following will take the installation procedure in the switch for  
example.  
¾
¾
Push the SFP Module into Switch along the track smoothly  
Plug fiber into the module, without any configuration manually,  
the SFP Module can work.  
15km  
Fiber  
TP-LINK Switch  
TL-SM221A  
TP-LINK Switch  
TL-SM221B  
Warning:  
1.  
2.  
In order to avoid ESD (ElectroStatic Discharge), do not touch  
the output pins on the module with your hand.  
Avoid directly looking towards the output port of the light  
modules and never locate the working fiber pointing to the  
eyes, otherwise may cause injury to your eyes.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Specifications  
Normal  
TL-SM221A  
Tx:1550nm  
Rx:1310nm  
TL-SM221B  
Tx:1310nm  
Rx:1550nm  
Wave Length  
IEEE 802.3ah 100Base-BX,  
CSMA/CD, TCP/IP  
Standards and Protocols  
Cable  
Single-mode Fiber  
Fiber Type  
9/125 um Single-mode  
Max. Cable Length  
Data Rate  
15km  
155Mbps  
LC  
Port Type  
Power Support  
Safety & Emission  
3.3V  
FCC, CE  
Environmental and Physical  
Operating Temp.  
Storage Temp.  
0~70(32~158)  
-40~80(-40~176)  
Operating Humidity  
Storage Humidity  
10%~90% RH, Non-condensing  
5%~90% RH, Non-condensing  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   

Tektronix Welding System TSG 601 User Manual
The Singing Machine Karaoke Machine STVG 999 User Manual
Timex Clock T025 User Manual
Toastmaster Slow Cooker TSC29W User Manual
Traulsen Refrigerator RHT232NUT FHS User Manual
Tricity Bendix Ventilation Hood CSIE508 User Manual
Tripp Lite Portable Generator PV700HF User Manual
Tunturi Treadmill T60F User Manual
ViewSonic Flat Panel Television N1750w User Manual
Volvo Automobile 240 User Manual