CMS601 DC
Product Description
Features
•
•
165mm (6.50") point source Dual ConcentricTM driver
The Tannoy CMS601 DC is a full bandwidth; high power and high sensitivity ceiling monitor
system. The 165mm (6.50") Tannoy Dual ConcentricTM is a point source drive unit design
comprising a multi fibre paper pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium
dome HF unit with neodymium magnet system. The driver and passive frequency dividing
network are mounted in a vented, injection moulded, paintable front baffle manufactured from
UV/weather resistant UL94V-0 ABS material.
High power & high sensitivity with extended frequency
response and very low distortion
•
•
Wide, controlled constant directivity dispersion for
optimum coverage.
Does not suffer from massive loss of energy in the
vertical plane at crossover caused by two way
discreet designs
The mid-bass and tweeter sections of the Tannoy Dual ConcentricTM constant directivity driver
are coincidentally aligned to a true point source; ensuring a wide and controlled dispersion for
optimum coverage; this while avoiding the massive loss of energy in the vertical plane, at the
crossover frequency, inherent in two-way discreet designs. This high power and high sensitivity
design, with extended frequency response and very low distortion, is equipped with dynamic high
frequency protection.
•
•
•
•
•
•
•
UV/weather resistant UL94V-0 ABS front baffle
Blind Mount & Pre Install options
Dynamic high frequency protection
Easily accessible tapping switch on front baffle.
Low insertion loss 60W line transformer
Ferrofluid cooled neodymium HF
Packaged with tile rails and C-ring for quick & easy
installation and simple stocking logistics
Five year warranty
This compact unit is specifically designed for applications requiring the combination of premium
sonic quality for music and speech reinforcement and exceptional reliability and intelligibility.
The CMS601 DC BM is equipped with a low insertion loss 60W line transformer easily
configurable to the following settings via front baffle mounted rotary tapping switch:
70V systems: 60W / 30W / 15W / 7.5W / OFF & low Impedance operation
100V systems: 60W / 30W / 15W / OFF & low Impedance operation
The CMS601 DC PI is supplied without a transformer. The 60W line transformer is available as
an optional accessory pack (7600 1658) for easy connection to the control switch circuit if the
product is to be used without a back can.
•
The recommended option for optimum performance and compliance with safety ratings is to use
the CMS601 PI Back Can (8001 4520) in which the transformer is pre-fitted.
Applications
Two CMS601 DC model versions and a separate back can are available to satisfy the vast
majority of installation application requirements:
•
•
•
•
•
•
•
•
•
•
Multi-zone foreground music & paging systems
Boardrooms and offices
Business music systems
Airports, convention centres, hotels
Reception and waiting rooms
Houses of worship
Retail outlets and shopping malls
Lounges and bars
Cruise ships
CMS601 DC BM (Blind Mount) - supplied with an integral back can.
CMS601 DC PI (Pre-Install) - supplied without a back can.
CMS601 PI Back Can (Pre-wire back can) - use with the CMS601 DC PI.
The zinc plated steel back cans have an integrated, recessed termination box. The removable
locking connector has screw terminals for secure wire termination and "loop through" facility.
Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit.
Spring loaded self-aligning clamps make for quick and easy installation, while all models are also
supplied with two tile support rails and one C-ring included in the package.
A plaster (mud) ring is available as an optional accessory.
Courtrooms
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
CMS601 DC
PERFORMANCE MEASUREMENTS
1m on-axis frequency response
100
90
80
70
60
50
ANECHOIC
FREQUENCY
RESPONSE
10
100
1000
10000
100000
frequency (Hz)
Impedance vs frequency
60
5
4
3
2
1
1
10
100
100
0
1000
0
10000
0
frequency (Hz)
IMPEDANCE
100
90
80
70
0 deg
10 deg
20deg
60
50
30deg
40deg
10
100
1000
frequency (Hz)
10000
100000
OFF AXIS RESPONSE
Horizontal off-axis response
360
330
300
270
240
210
180
150
120
90
60
30
0
100
1000
10000
frequency (Hz)
BEAMWIDTH
Horizontal off-axis response
100
DI
DI 10
1
100
1000
10000
DIRECTIVITY
INDEX
frequency (Hz)
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
CMS601 DC
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100 Hz
250 Hz
315 Hz
400 Hz
500 Hz
0
0
125 Hz
160 Hz
200 Hz
330
30
0
-12
-24
-36
330
30
0
-12
-24
-36
300
60
300
60
270
90
270
90
-48
-48
0
630 Hz
800 Hz
1 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
0
1.25 kHz
330
30
0
-12
-24
-36
330
30
0
-12
-24
-36
300
60
300
60
270
90
270
90
-48
-48
4 kHz
5 kHz
6.3 kHz
8 kHz
10 kHz
12.5 kHz
16 kHz
20 kHz
0
0
330
30
0
-12
-24
-36
330
30
0
-12
-24
-36
300
60
300
60
270
90
270
90
-48
-48
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
CMS601 DC
DIMENSIONAL SKETCHES
275.50
[10.90"]
258.00
[10.16"]
244.30
[9.62"]
5.00
[0.20"]
280.00
[11.02"]
SIZE - 253mm (9.97")
CMS601 DC BM TEMPLATE HOLE CUTOUT
244.30
[9.62"]
99.40
[3.91"]
5.00
[0.20"]
280.00
[11.02"]
SIZE - 253mm (9.97")
TEMPLATE HOLE CUTOUT
CMS601 DC PI
Ordering Information
PART NUMBER
MODEL NAME
BAFFLE / GRILLE COLOUR
PACKED QUANTITY
8001 4530
8001 4540
8001 4181
8001 4590
7600 1658
CMS601 DC BM
CMS601 DC PI
White / paintable
White / paintable
Zinc plated steel
Zinc plated steel
N/A
2
2
CMS601 DC Plaster (Mud) Ring
CMS601 DC PI 8ohm back can
10
1
CMS601 DC 60W transformer kit 8 ohm
1
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
CMS601 DC
DIMENSIONAL SKETCHES
The PI back can accepts direct
connection to installed conduit in two
ways using squeeze connectors:
168.5
[6.63"]
1
22mm (0.87”) via the clamp location at
the rear after first removing cable clamp
351.0
[13.82"]
319.0
[12.56"]
249.4
[9.82"]
8.8
[0.35"]
2 Any of the three knock-out points at the
side 19mm / 22mm / 28mm
(0.75" / 0.87" / 1.10")
151.2
[5.95"]
CMS601 PI BACK CAN
SUPPLIED ACCESSORIES
C-RING
OPTIONAL ACCESSORIES
PLASTER (MUD) RING
318.00 [12.52"]
27.00
[1.06"]
251.00
[9.88"]
80.00
16.00 [0.63"]
15.00
[3.15"]
4.50 [0.18"]
351.00
[13.82"]
60.00
[2.36”]
[0.59"]
184.50 [7.26"
184.50 [7.26"]
180.00 [7.09"]
205.00 [8.07"]
230.00 [9.06"]
TILE BRIDGE
635.00 [25.00"]
522.00 [20.55"]
360.00 [14.17"]
255.00 [10.04"]
280.00 [11.02"]
305.00 [12.01"]
81.00
[3.19"]
650.00 [25.59"]
251.00 [9.88"]
15.00 [0.59"]
25 POSITIONS
10.00
15.00 [0.59"]
[0.39"]
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
CMS601 DC
Architectural specifications
The Ceiling Monitor System shall consist of a 165mm (6.50") full range, point source, constant directivity Dual ConcentricTM transducer and passive fre-
quency dividing network mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material.
The back can in both PI (pre-install) & BM (blind-mount variants) shall be constructed of zinc plated steel. A recessed termination box shall be integrated with
the back can, a removable locking connector with screw terminals for secure wire termination with "loop through" facility shall be provided. Strain relief will be
provided by a clamping mechanism for use with plenum rated cable or conduit.
For prewiring the PI (pre-install) back can is provided with conduit knockouts (19mm / 22mm / 28mm, 0.75" / 0.87" / 1.14"). A safety ring is located on the
rear of the back can for a load bearing safety bond.
Performance of the Ceiling Monitor System shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 111degrees
(1kHz to 6kHz). Frequency response measured on axis shall be 50Hz - 30kHz (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic
chamber) with no equalization. Sensitivity shall be 91dB (1W @ 1m). Long term power handling capacity as defined in EIA-426B test shall be 80W,
recommended amplifier power 160W. Dynamic high frequency protection is provided for occasional overpowering. The nominal system impedance shall be
8 Ohms (in low impedance setting).
The Ceiling Monitor System shall be equipped with a 60W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with 60,
30, 15, 7.5* Watt taps available. An easily accessible rotary switch located on the front baffle shall be available for selecting transformer and low impedance
settings. A weather resistant perforated steel grille covers the transducer and switch.
Two support rails and one C-Ring shall be included with the ceiling monitor system.
Bezel diameter 280mm (11.02")
BM Front of ceiling to rear of back can 258mm (10.16"), Front of ceiling to top of safety loop 275.5mm (10.84")
PI
Front of ceiling surface to rear of speaker unit 99.40mm (3.91"), Front of accessory back can bezel to top of safety loop 168.50mm (6.60")
The Ceiling Monitor System shall be the...CMS601 DC.
*70 Volt only
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
CMS601 DC
NOTES
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
CMS601 DC
NOTES
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CMS601 DC data file // issue 1.06 // 10.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
|