REQUIRED TOOLS
AND MATERIALS:
Backboard and Rim
Owners Manual
•2 Capable Adults
•Tape Measure
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
•Step Ladder - 8ft.
(2.4 m)
•Carpenter’s Level
•(2 each) Wrenches
and/or Socket Wrenches
and Sockets (Deep-Well
Sockets are
Recommended).
1/2"
9/16"
3/4"
AND/OR
Adult Assembly Required.
This manual, accompanied by sales receipt, should be saved and kept on hand as a
convenient reference, as it contains important information about your model.
1/2"
9/16"
3/4"
•Extension is
Recommended.
WARNING!
Write Model Number
From Box Here:
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
OPTIONAL TOOLS
AND MATERIALS:
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
Toll-Free Customer Service Number for U.S: 1-800-558-5234,
For Canada: 1-800-284-8339,
• Large and Small
Adjustable Wrenches
For Europe: 00 800 555 85234 (Sweden: 009 555 85234),
For Australia: 1-800-632 7921
Internet Address: http://www.huffysports.com
05/06 ID# M7900412
1
© COPYRIGHT 2006 by SPALDING
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST - See Hardware Identifier
Item Qty. Part No. Description Item Qty. Part No. Description
1
2
1
Rim
16
17
4
6
201611 Bolt, Hex, 5/16x3” Long
203100 Whiz Nut, 5/16”
2 20260401 Bolt, Carriage 3/8 x 4.75” Long
3
4
5
6
7
8
9
10
11
12
13
2
2
4
8
2
2
1
203474 Washer, Flat, 1”O.D.
203017 Hex Nut, 3/8”
203063 Nylon Nut, 3/8”
203232 Washer, 3/4” O.D.
200484 Spring
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1
1
2
1
2
2
2
2
2
Net
Label, Logo
203798 Bolt, Hex, 5/16-18 x 1.5” Long
579800 Warning Label
203274 Foam Pad 3/32 x 5 x 5
202603 Nylon Washer
202602 Lock Washer
202636 Special Nut, Locking
203795 Special Nut
202601 Washer
202531 Tension and Leveling Label
2 20252301 Spacer
2
2
203439 Bolt, Hex, 3/8 x 6” Long
220140 Screw, Self Tap
1 90832901 H-Frame
1 90808703 Bracket - Red
1
2
2
1
205457 Foam Tape
91808703 Bracket - Pumpkin
1 10808501 Inner Bracket - Zinc
1 90808603 Cover Plate - Red
91808603 Cover Plate - Pumpkin
204622 Bolt, Hex, 3/8 x 1.75” Long
200580 Bracket, Angle, 1.5” x 1.4”
Backboard
14
15
HARDWARE IDENTIFIER (BOLTS)
#2 (2)
#12 (2)
#16 (4)
#20 (2)
#29 (2)
#11 (2)
05/06 ID# M7900412
3
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFIER (NUTS, WASHERS & SPACERS)
#23 (2)
#3 (2)
#6 (8)
#8 (2)
#4 (2)
#5 (4)
#17 (6)
#25 (2)
#24 (2)
#26 (2)
#10 (2)
HARDWARE IDENTIFIER
(Not Actual Size)
#18 (1)
#1 (1)
#13 (1)
#14 (1)
#15 (1)
#7 (2)
LOGO
#28 (1)
4
Item #30 (2)
#19 (1)
#22 (2)
#27 (1)
#31 (1)
ID# M7900412 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLE THE BACKBOARD AND RIM
This is what your system will look like
when you’ve finished this section:
WARNING!
IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE
THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN
SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL
TOLL-FREE NUMBER:
TOOLS REQUIRED
1/2"
9/16"
3/4"
AND/OR
1/2"
9/16"
3/4"
05/06 ID# M7900412
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach foam pad (22) to both
front and back of backboard so
that holes on pad line up with
holes on backboard as shown.
Attach foam (28) to H-Frame
(27) as shown.
NOTE:
1.
We recommend mounting backboard to a solid
material (steel) behind rim area.
27
22
WARNING!
28
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY DAMAGE.
NOTE:
If being used with an extension arm attach angled brackets (30) to H-Frame as shown.
27
29
30
30
5
29
5
6
ID# M7900412 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
Lift backboard upright and insert bolt (20) through board
into H-frame (27). Secure using nut (17) as shown.
2.
WARNING!
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY DAMAGE.
27
20
20
28
17
17
05/06 ID# M7900412
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RIM ASSEMBLY & INSTALLATION
Install two carriage bolts (2) through rim (1), washers (3), and lock washers (24) as shown.
Tighten nuts (4) completely.
3.
NOTE:
Perform this step twice
as it is applied to both
holes of rim bracket
shown
2
1
NOTE: COMPLETED ASSEMBLY
3
24
4
Place a special locking nut (25) approximately half-way up on each carriage bolt (2) as shown.
Keep the two special locking nuts (25) at the same level.
4.
2
NOTE: COMPLETED ASSEMBLY
25
8
ID# M7900412 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
First, test fit spacer (10) into back bracket (13)
and Carefully rock in a circular motion to ream
out any excess paint from holes if necessary.
5.
13
10
Place rim (1) into back bracket
(13) so that the holes are
properly aligned.
1
13
Line up holes
25
Then, insert spacer (10) through back bracket (13), nylon washers (23) and rim assembly (1).
BOTTOM VIEW
NOTE:
Ends of spacer (10) should
be flush on both sides of
board bracket (13).
23
10
BOTTOM VIEW
23
1
13
23
23
10
Spacer
flush with
bracket
Spacer
flush with
bracket
13
05/06 ID# M7900412
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Install bolt (11) through top holes on bracket (13) using washers (6) and nut (5) as shown.
Tighten completely.
6.
10
6
6
23
5
23
11
Attach rim assembly to backboard and support structure by inserting bolts (16) through bottom
holes in back bracket (13). Secure with nuts (17) and washers (6). Tighten nuts (17) completely.
7.
16
17
6
22
13
22
17
16
6
10
ID# M7900412 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
Position rim assembly (1) 90 degrees to back bracket (13) as shown. Place inner-bracket (14)
over both carriage bolts (2) followed by springs (7), washers (8) and special nuts (26).
8.
NOTE:
COMPLETED
ASSEMBLY
NOTE:
Tighten special nuts (26)
until flush with end of
carriage bolts (2)
as shown.
NOTE:
Do not over tighten as rim
will not flex properly. See
leveling instructions (Step
13) to determine how much
to tighten nuts (25 and 26).
1
13
8
14
7
26
2
25
Lower lower rim down. Holes in inner bracket (14) should line up with holes in backboard bracket
(13). If not, adjust special locknuts (25 & 26) until holes are aligned.
9.
14
25
Align these
holes.
13
26
05/06 ID# M7900412
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure back bracket (13) fully to backboard by inserting bolts (16) through upper holes in back
bracket (13), Add washers (6) and nuts (17) to bolts (16).
Tighten nuts (17) completely.
10.
17
6
6
16
22
13
First, test fit spacer (10) into back bracket (13) and Carefully rock in a circular motion to ream out
any excess paint from holes if necessary. Insert spacer (10) through bottom holes in board bracket
(13) and inner bracket (14).
11.
13
10
BOTTOM VIEW
NOTE:
Ends of spacer (10) should be
flush on both sides of board
bracket (13).
13
Spacer
flush with
bracket
Spacer
flush with
bracket
10
12
ID# M7900412 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
Then, install bolt (11), washers (6), and nut (5) through spacer (10) and
tighten completely.
12.
6
5
6
11
13.
LEVELING AND TENSION
ADJUSTING INSTRUCTIONS:
Adhere leveling and tension adjusting label (9) to
inside of rim cover plate (15).
9
TO LEVEL RIM,
TIGHTEN OR LOOSEN THESE NUTS
TO ADJUST RIM TENSION ,
TIGHTEN OR LOOSEN THESE NUTS
25
26
202531
Place level on rim (1) and adjust nut (25) until
level. Tighten nut (26) to set rim tension for
playing.
15
05/06 ID# M7900412
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Apply logo label (19) to cover plate (15). Install cover plate (15) on rim (1) using self tapping
screws (12) as shown (note orientation of cover plate).
14.
NOTE:
Cover plate (15)
will fit INSIDE
back bracket.
19
15
12
15
15
15
Secure net (18) to rim (1).
15.
1
NOTE:
1
2
Official rim height is 10-0’ (3.05 m)
from top of rim to playing surface.
OUTSIDE VIEW
4
3
10 ft.
(3.05M)
14
ID# M7900412 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
|