Advanced operation
Table of contents
Product introduction
1 Display brightness adjustment
2 Display contrast adjustment
3 Display sharpness adjustment
4 Display color saturation adjustment
5 Display language
Points requiring attention during use
Introduction of main parts
1 Packing list
6 Select video/audio signal source
2 Introduction of host functional interface
3 Remote control
System parameters
4 Connection to other equipment
5 Use of battery
1 Interface
2 Specifications
Basic operation
Troubleshooting
1 Turn it on
2 Play video/audio files
Download from Www.Somanuals.com. All Manuals Search And Download.
the body of the device. When using a cleaning cloth containing a chemical, please
carefully read the use instructions for the cleaning cloth. Please unplug the power
cord when cleaning the device.
e. The device falls to the ground or the housing has been damaged.
20. Repair – The user should not try to repair the device. Repair should be conducted by a qualified
technician or the retailer. It is also possible to call the SI hotline to get help.
When cleaning the liquid crystal display unit, please use a piece of soft, dry cloth (such as lens
cleaning cloth). Water left on the display unit for a long time will cause discoloration of the screen or
leave stains. Please use special liquid crystal display cleaner to clean persistent stains.
13. Storage period – Please unplug the device if it is not used for a long time.
14. Thunderstorms – Please unplug the special adapter during thunderstorms.
15. Penetration of foreign matter or liquid – Please be careful not to let foreign matter or liquids enter
the housing through the gap.
One year warranty
SI warranties to the final user that all of the sourced audio, PC audio, portable audio, TV or
game speaker systems are free of defective materials or workmanship in the course of reasonable and
regular use for a term of one year from the purchase date.
This warranty is the only warranty in effect relative to SI sourced audio, PC audio, portable
audio, TV or game speaker systems, and no other expressed or implied warranties are valid. Neither SI
nor any retailer authorized by SI is responsible for any indirect damage occurring during use of the
speakers. (The limitation with regard to indirect damage may be inapplicable in some areas where such
limitation is prohibited.)
16. Auxiliary parts – Use only the auxiliary parts specified by Sonic Impact.
17. Do not place any article on the body of this device.
18. When using this device in a hospital, airplane, or other special environment, please follow hospital
administrative regulations, aviation law, and other special regulations.
19. Repair is required when the following types of damage occur – In these cases, the device should be
repaired by an authorized service agent:
Under this warranty, SI is not responsible for any problem, defect, or malfunction under the
following circumstances: misuse, abuse, incorrect installation, use with defective or improper
equipment, or use of the speakers with any equipment for which they were not intended.
The terms of this warranty are applicable only when the source audio, PC audio, portable
audio, TV or game speaker system is returned to the authorized SI retailer that sold said products.
a. Power cord or plug is damaged.
b. Foreign matter or liquid enters the device.
c. The device is exposed to rain.
d. The device works abnormally or the performance changes significantly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction of main parts
CUSTOMER SERVICE
For service or warranty of the electronics please contact:
1 Packing list
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
Sonic Impact Technologies LLC ©Sonic Impact Technologies LLC
2555 State Street
San Diego, California 92101
USA
Video-55 is a trademark of Sonic
Impact Technologies LLC
iPod® is trademark of Apple
Computer, Inc., registered in the
U.S. and other countries
www.si-technologies.com
One main unit
One power adapter
One car charger
One video cable
One bag
One remote control Insert adapter
Operating Manual
Quick Set Up
Cleaning cloth
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Functional interface gate, with video output, video input, audio input, external power interface
and "USB" interface
3 Operating status indicator light indicates the current operational status of the device. The
indicator light has the following four statuses.
a. Turned on: Green light is on
2 Introduction to host functional interface
b. Standby: Red light is on
c. Muted: Green light flashes
d. Turned off: Lights are off
4 Battery status indicator light indicates only the current operating status of the battery. This light
has the following four indicators:
a. Sufficient electric power: Green light is on
b. Insufficient electric power: Red light flashes
c. Charging: Green light flashes
d. Turned off: Light is off
5 Remote control storage compartment. Ejection-type remote control storage compartment, which
further facilitates storage and removal of the remote.
6 Remote control signal receiving window: Used to receive the remote control signal
1 Speaker, The device is equipped with two 1.25" full-frequency titanium alloy cone speakers, one
at each end, to provide high-quality audio performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
screen will gradually decrease when the "–" key is pressed.
6 HOLD Key: Panel locking key: 1. If the device is switched to "HOLD" after it is turned on, all of the
keys on the panel of the device are locked. The remote control will remain active. 2. If the
device is switched to "HOLD" after it is turned off, the device cannot be turned on using either
the remote control or the "POWER" key on the panel.
7 iPod ® "30pin" interface jack: Used to connect this device to "iPod ® VIDEO"
8 POWER key: Turns the device on/off
9
ꢀ
key: Menu navigate up key: After entering the "MENU" menu for adjusting the parameters of the
device, this key is used for navigating up to select items from the device MENU-up parameter
menu.
key: Menu navigate down key: After entering the "MENU" menu for adjusting the parameters of
the device, this key is used for navigating down to select items from the device MENU-up
parameter menu.
1 Rubber anti-wear pad: Protect the device from wear
2 Liquid crystal display screen: 7-inch, 16:9
11 MENU key: MENU up parameter-adjusting menu key: Press "MENU" key once to enter the MENU
up parameter adjustment menu. Press "MENU" key again to exit the device MENU up parameter
adjustment menu.
3 Speaker port holes
4 + Key: 1. Total volume-up control key: the volume of the device will gradually increase when "+"
is pressed; 2. After entering the "MENU" parameter-adjusting menu, the analog parameter on the
screen will gradually increase when the "+" key is pressed.
5 - Key: 1. Total volume-up control key: the volume of the device will gradually decrease when "–"
is pressed; 2. After entering the "MENU" parameter-adjusting menu, the analog parameter on the
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Remote control
ATTENTION: To avoid damage, please do not throw, step on, or hit the remote
control.
1)
2)
3)
The remote control may not work if there is an obstacle between the main unit and the remote
control.
Please do not expose the remote control to strong light sources. Otherwise, the remote control
may not be able to operate.
Please use the remote control within the effective receiving range. The effective receiving range is
shown below.
1 Bottom rubber pads: Protect the device from wear
2 Rechargeable battery compartment gate
3 Main unit label sticker
4 Main unit label
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Remote control functions
4) Please remove the plastic film between the remote control battery and the metal spring contacts
1 POWER key: Same as that on the main unit
before using the remote control.
2 Mute key: Lightly press this key once to mute the sound. Press it again to restore the sound.
3 ꢀ key: Rewind key for "iPod ® VIDEO" player: When playing songs, press the "ꢀ" key once to
jump to the previous song. Hold down the "ꢀ" key for more than 2 seconds to rewind the song
that is being played. When browsing slides, press "ꢀ" once to jump to the previous slide. Hold
down the "ꢀ" key for more than 2 seconds to enter the upward browsing state.
4 + key: Same as that on the main unit
ATTENTION: In order to prevent the remote control lithium-ion battery from
leaking, please remove the battery from the remote control if the remote control will
not be used for a long period (for example, one month or longer). If there is liquid
leaking from the remote, please wipe away the liquid and install a new battery.
5 MENU key: Same as that on the main unit
Download from Www.Somanuals.com. All Manuals Search And Download.
6
key: Same as that on the main unit
7 ꢁꢂ key: Video-55 pause key/play key: Press "ꢁꢂ" once to play. Press the "ꢁꢂ" again to
1)
Diagram illustrating connection to TV
pause
8
key: Same as that on the main unit
9 ꢃkey: Fast-forward key for iPod ® 5G player: When playing songs, press "ꢃ" key once to jump
to the next song. Hold down the "ꢃ" key for more than 2 seconds to fast-forward the song that
is being played. When browsing slides, press "ꢃ" once to jump to the next slide. Hold down the
"ꢃ" key for more than 2 seconds to enter the downward browsing state.
ꢀ – key: Same as that on the main unit
4 Connection to other equipment
ATTENTION: Please turn off the power of the main unit before connecting to
other equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
2)
. Diagram illustrating connection to external speaker
3)
Diagram illustrating connection to PC
Data communication between "PC" and iPod ® 5G can be realized through the "USB" interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
4)
Diagram illustrating connection to video input equipment
5)
Diagram illustrating connection between power adapter and external power supply
ATTENTION: Please place the device in a stable location when making the
electrical connection. Avoid short-circuits at the charging terminals of the device
and the adapter.
ATTENTION: The battery adapter is suitable for 100-240 V. It is globally
applicable.
ATTENTION: Please make sure that the power of the device is already turned off
when plugging in or unplugging.
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Use of battery
A rechargeable lithium-ion battery is used in this device. Please operate as described below.
1)
Charge the battery
a. Connect adapter to the "DC IN" socket of this device.
b. Plug the power adapter into an AC power outlet.
· When charging starts the charging indicator light glows red.
· When charging is finished, the indicator light turns green.
· Charging usually takes 4-6 hours depending on the operating environment.
Important points
2)
a. The charging time should not be shorter than 12 hours before the first use. This can help to
extend the average life of the battery.
b. If the ambient temperature is too high, the battery may not be able to work since the device
has protective safety features.
c. Please remove the battery from the main unit if this device will not be used for an extended
time. Avoid keeping the battery in the main unit for a long time since a weak current will flow
out continuously, leading to excess battery discharge. In some cases, the battery may be
unusable even when it is recharged.
d. If the battery is not fully charged, the picture may become unstable. Please make sure that the
battery is fully charged before using the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
e. The battery should be stored at a temperature of 15-25°C. Please do not expose the battery to
excessively low or high temperatures. Please do not store the battery in a dusty environment.
f. If the battery is to be stored for a long time, it is recommended to charge/discharge the battery
once every year. Use the battery in the main unit until it is discharged. Then, recharge the
battery and store it.
g. If the battery cannot be charged or the playing time is very short, it means that the service life
of the battery has expired. It is necessary to replace it with a new battery. (Please follow the
battery replacement instructions.
ATTENTION: Only a battery with the same specifications designated by SI
can be used. To do otherwise can be dangerous.
3)
Replacing the lithium-ion battery
To replace the lithium-ion battery, please disassemble and install the parts as shown below.
Download from Www.Somanuals.com. All Manuals Search And Download.
4)
Special reminders:
Because of the intrinsic properties of lithium-ion batteries, please note the following:
a. When disposing of a defective or old battery, please apply adhesive tape to the terminals and
dispose of the battery according to local regulations.
5)
Battery specifications
Nominal Voltage:7.0V
Nominal Capacity:4000mAh
Max.Charging Voltage:8.4V
GB/T 18287-2000
b. In order to prolong the service life of the battery, please do not charge the battery frequently in
an intermittent way. The number of charging cycles has significant influence on the service life
of the battery.
c. Charging will cause slight heating, which is considered normal.
d. If the temperature in the charging environment is too high, the battery will not become fully
charged. Please do not charge the battery at an excessively high ambient temperature. It is
preferred to charge the battery at an ambient temperature of 10-30°C.
e. In normal storage, the capacity of the lithium-ion battery will decrease naturally over time. As a
result, the playing time will be shortened.
6)
Use power adapter to supply power
a. Connect the DC output plug on the power adapter to the "DC IN" socket on the device.
b. Insert the AC plug of the power adapter into a power outlet. The device will enter standby
status.
f. The capacity of the lithium-ion battery will decrease gradually as the number of charging cycles
increases. As a result, the playing time will be shortened.
Basic operation
g. The capacity of the lithium-ion battery will decrease gradually along with a drop in ambient
temperature. As a result, the playing time will be shortened.
1 Turning it on
The aforementioned consumptions are normal consumptions of the lithium-ion battery. It is
a. Insert the power plug of the adapter into a power outlet.
recommended that the user charge the battery when it is nearly discharged in order to extend the
service life of the lithium-ion battery.
b. Insert the DC output plug of the adapter into the "DC" input socket of the main unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
c. If the "HOLD" key on the keypad is in the locked position, please release the "HOLD" key and press the
"POWER" key. If the "HOLD" key is in the released state, press the "POWER" key directly to turn on the
device.
2)
Play the program source signal
a. iPod ®
1 If the Video-55 is opened and turned on and the "30pin" interface is correctly connected to an "iPod
®," the device will play the video/audio signals output from the "iPod ®."
2 The Video-55 will turn on the display screen when it detects a video signal output from an "iPod ®."
3 Two minutes after the iPod ® ceases output of a video signal, the display screen of the Video-55 will
turn off automatically and will enter the audio play mode.
d. The power indicator light will turn on, indicating that the device can be used.
e. In the standby mode (when the power indicator light is red), it is also possible to turn on the device
by pressing the standby key on the remote control.
2 Play video/audio files
4 If the display screen is closed while the Video-55 is playing video/audio, the display screen will turn
off instantly, while the audio continues to play.
1)
Identify the program source equipment
5 If the iPod ® connected to the Video-55 is in the off status, the "POWER" key on the operating panel
of the Video-55 or on the remote control can be used to turn on the "iPod ®."
b. Other video/audio players
Make sure that the Video-55 "30pin" interface has been correctly connected to "iPod ® 5G," or
that the "AV IN" socket has been correctly connected to another video/audio player.
If the Video-55 is not connected correctly to as iPod ® or other video/audio player, the device
will show a blue screen after it is turned on, and will automatically enter standby status after 30
seconds.
1 If the Video-55 is opened and turned on and the "AV IN" interface is correctly connected to another
video/audio player, the device will play the current video/audio signal.
2 The Video-55 will turn on the display screen when it detects a video signal output from an "iPod ®."
3 Two minutes after the iPod ® stops outputting a video signal, the display screen of Video-55 will turn
off automatically and will enter the audio play mode.
If the Video-55 is correctly connected to an iPod ® and another video/audio player at the
same time, the video/audio signal output from the iPod ® will be given priority.
ATTENTION: Be careful when connecting equipment. The interface on the
device can be damaged by improper use.
4 If the display screen is closed when the Video-55 is playing video/audio, the display screen will turn
off instantly, while the audio continues to play.
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTENTION: When the "30pin" interface of the Video-55 is corrected to an
iPod ® that is on, the Video-55 cannot play signals output from the video/audio
player connected to the "AV IN" interface. It is necessary to select and confirm
"VIDEO" in the "iPod ®/VIDEO" program source section in the "MENU"
menu in order to play other video/audio equipment. When the device is turned
off and turned on again, the device will automatically give higher priority to
the iPod ® program source.
4)
Vidio fast-forward navigate down, rewind navigate up
a. iPod ®
When the device plays songs, if the "HOLD" key on the iPod ® control panel is in the released
state, press the "ꢃ" key once to jump to the next song. Hold down the "ꢃ" key for more than 2
seconds to fast-forward the song that is being played. When browsing slides, press "ꢃ" once to jump to
the next slide. Hold down "ꢃ" key for more than 2 seconds to enter the downward browsing state.
When playing songs, press "ꢀ" key once to jump to the previous song. Hold down "ꢀ" key for more
than 2 seconds to rewind the song that is being played. When browsing slides, press "ꢀ" once to jump
to the previous slide. Hold down "ꢀ" key for more than 2 seconds to enter the upward browsing state.
If the "HOLD" key is in the locked state, operation from the iPod ® control panel is ineffective. The
remote control of the Video-55 is not limited by locking the "HOLD" key on the iPod ® control panel.
b. Other video/audio players
3)
Playing and pausing the Video-55
a. iPod ®
If the "HOLD" key on the iPod ® control panel is in the released state, Press "ꢂ" once to play.
Press it again to pause. When the "HOLD" key is in the locked state, operation from the iPod ® control
panel is ineffective. The remote control of the Video-55 is not limited by locking the "HOLD" key on the
iPod ® control panel.
A video/audio player connected to the "AV IN" interface cannot be fast-forwarded, navigated
up and down, or rewound by the remote control of the Video-55. It is necessary to fast-forward or
navigate down, rewind or navigate up by means of the video/audio equipment connected to the "AV IN"
interface.
b. Other video/audio players
The remote control of the Video-55 cannot play/pause other video/audio players connected
to the "AV IN" interface. It is necessary to play/pause by means of the video/audio equipment connected
to the "AV IN" interface.
5)
Volume adjustment
a. iPod ®
When the Video-55 is playing, the volume is adjusted using the "+," "–" keys. The volume key
Download from Www.Somanuals.com. All Manuals Search And Download.
to enter standby status instead of turning off the power of the Video-55.
on the iPod ® control panel cannot control the volume of this device.
b. Other video/audio players
Advanced operations
When this device is playing, the volume is adjusted using "+," "–" keys. The volume keys on the
video/audio equipment connected to this device have the same functions.
Advanced Video-55 operations are realized through the "Video-55 MENU" displayed by pressing
the "MENU" key. When the MENU key on the control panel or the remote control is pressed once, the
Video-55 MENU will be displayed in a semi-transparent state on the display screen. The user can select
items from the Video-55 MENU using the " , " keys and adjust the parameter using the "+, –" keys.
3 Turning it off
1)
Standby status
If the "POWER" key is pressed to enter standby status when the Video-55 is operating and the
"HOLD" key is in the released state, the status light of this device will be lit red. If the "HOLD" key is in
the released state, pressing the "POWER" key on the remote control of the Video-55 is the same as that
operation on the operation panel.
ATTENTION: If the "HOLD" key of the Video-55 is in the locked state,
pressing the "POWER" key on the remote control will turn off the power.
2)
Turning off the power
If the "HOLD" key is locked when the Video-55 is in standby status, the power will be turned
off, and the status light will be off.
ATTENTION: If the "HOLD" key of the Video-55 is in the released state,
pressing the "POWER" key on the remote control of the Video-55 will cause it
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Display brightness adjustment
2 Display contrast adjustment
a. Press the "MENU" key on the control panel or the remote control to display the VIDEO MENU."
b. Select "BRIGHTNESS" using the " , " keys on the control panel or the remote control. The selected
item will have a different color from the unselected items. In the meantime, the numeric level
describing the current status of the selected item will appear to the right of the selected item. A
corresponding display in graphic form will also be shown at the bottom of the "VIDEO MENU."
c. Use the "+, –" keys on the control panel or the remote control to adjust to an appropriate number. The
larger the number, the higher the brightness and vice versa. The adjustment range is 1-100.
d. Press the "MENU" key on the control panel or the remote control again to exit the "VIDEO MENU."
a. Press the "MENU" key on the Video-55 control panel or remote control to display the VIDEO MENU."
b. Select "CONTRAST" using the " , " keys on the Video-55 control panel or remote control. The selected
item will have a different color from the unselected items. In the meantime, the numeric level
describing the current status of the selected item will appear to the right of the selected item. A
corresponding display in graphic form will also be shown at the bottom of the "VIDEO MENU."
c. Use the "+, –" keys on the Video-55 control panel or the remote control to adjust to an appropriate
number. The larger the number, the higher the contrast and vice versa. The adjustment range is 1-100.
d. Press the "MENU" key on the Video-55 control panel or remote control again to exit the "VIDEO MENU."
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Display sharpness adjustment
4 Display color saturation adjustment
a. Press the "MENU" key on the Video-55 control panel or remote control to display the VIDEO MENU."
b. Select "SHARPNESS" using the " , " keys on the Video-55 control panel or remote control. The
selected item will have a different color from the unselected items. In the meantime, the numeric
level describing the current status of the selected item will appear to the right of the selected item.
A corresponding display in graphic form will also be shown at the bottom of the "VIDEO MENU."
c. Use the "+, –" keys on the Video-55 control panel or remote control to adjust to an appropriate
number. The larger the number, the higher the sharpness and vice versa. The adjustment range is 1-6.
d. Press the "MENU" key on the Video-55 control panel or the remote control again to exit the "VIDEO
MENU."
a. Press the "MENU" key on the control panel or remote control to display the "VIDEO MENU."
b. Select "COLOR" using the " , " keys on the control panel or remote control. The selected item will
have a different color from the unselected items. In the meantime, the numeric level describing the
current status of the selected item will appear to the right of the selected item. A corresponding
display in graphic form will also be shown at the bottom of the "VIDEO MENU."
c. Use the "+, –" keys on the control panel or remote control to adjust to an appropriate number. The
larger the number, the higher the degree of color saturation and vice versa. The adjustment range is
1-100.
d. Press the "MENU" key on the control panel or remote control again to exit the "VIDEO MENU."
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Display language
d. Press the "MENU" key on the control panel or remote control again to exit the "VIDEO MENU."
a. Press the "MENU" key on the Video-55 control panel or the remote control to display the VIDEO MENU."
b. Select "LANGUAGE" using the " , " keys on the Video-55 control panel or remote control. The
selected item will have a different color from the unselected items. In the meantime, the current
language status will appear to the right of the selected item.
c. Press the "MENU" key on the Video-55 control panel or remote control again to exit the "VIDEO MENU."
6 Select video/audio signal source
a. Press the "MENU" key on the control panel or remote control to display the "VIDEO MENU."
b. Select "SOURCE" using the " , " keys on the control panel or remote control. In the meantime, the
current signal source will appear to the right of the selected item.
c. Select iPod ® or another video/audio player as the current video/audio signal source with higher
priority using "+, –" keys.
ATTENTION: When VIDEO is MENU through the VIDEO MENU, another
video/audio signal source connected to the AV IN interface will be selected.
When this device is turned off and then turned on again, the device will
automatically give higher priority to the iPod ® program source.
Download from Www.Somanuals.com. All Manuals Search And Download.
System parameters
Troubleshooting
1 Interface
Symptom
Possible problem
Solution
1)
2)
3)
4)
5)
DC IN: 9V 2A DC power input terminal
AV IN: AV input
The status light is not on
(when AC power is used)
Power is not turned on.
Release HOLD to turn on the power.
AV OUT: AV output
The power cord is not
Insert the power plug into a wall
outlet and plug the power connector
into the power socket.
connected to the wall outlet,
and/or the power connector is
not plugged into the power
socket on the back.
Earphone output
Data terminal: Mini USB socket
2 Specifications
The power for the voltage
stabilizer (if one is used) is not
turned on.
If the power cable has been plugged
into the voltage stabilizer, please
make sure that the voltage stabilizer
power has been turned on
1)
2)
3)
4)
5)
6)
Audio system mode
2-channel
Power (PMPO)
Frequency response
Display screen
Resolution
20 W x 2
200-18 kHz
The outlet on the wall is
inoperable.
Plug another device into the (same)
wall outlet to make sure that the
outlet works properly.
7-inch 16:9
480 x RGB x 234
Input AC110V-260V/50/60Hz
The remote control does not
work
The remote control is out of
its effective range
Move the remote control into the
effective range
Power supply
There is an obstacle between
the device and the remote
control
Move the obstacle or move the
remote control into the effective
range without the obstacle
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible problem
Solution
Symptom
Possible problem
The rechargeable battery is
discharged
Solution
The battery of the remote
control is discharged
Replace the battery (see the quick-
reference card for details of the
procedure)
Charge the device [sic; battery] or
use an external power supply
The rechargeable battery is
making poor contact
Establish close contact between the
rechargeable battery and the device
There is radio wave
interference
Too close to the radio
transmission tower
Move the speaker to see if the
interference disappears. You can buy
a shielded cable at the local
electronics store.
A black screen
is displayed
when
The video/audio file has no
video signal output, and the
device has entered
Normal, play video signal
video/audio
files are
screensaver status
The display A black screen
The power is not turned on
when using an external power
supply.
Release HOLD to turn on the power
switch
The power supply comes loose
when using an external power
supply
Fasten the power supply outlet
screen has
problems
is displayed
when the
device is
played
turned on
When using an external power
supply, the power cord is not
connected to the wall outlet.
Insert the power plug into a outlet
wall
The rechargeable battery is
discharged
Charge the device or use an external
power supply
A blue screen
is displayed
when the
The video/audio player is not
connected correctly
Correctly connect iPod ® or other
video/audio player
When using an external power
supply, the power connector is
not connected to the power
socket on the back of the
Video-55 system.
Plug the power connector into the
DC socket.
The video/audio signal input
Make sure that iPod ® or VIDEO is
device is
interface is not MENU correctly selected for video/audio signal input
in the VIDEO MENU
turned on
The video/audio player is in
blue screen status
Operate the video/audio player to
start playing
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible problem
Solution
Symptom
Possible problem
Solution
A blue screen
is displayed
when a
The video/audio file has no
video signal output. The
device enters blue screen
status within the next two
minutes. The device then
enters the screensaver mode.
Normal, play video signal
Check whether the power switch is
in the "on" position and whether the
indicator light is on.
video/audio
file is played
The volume is too low
Press "+" key to increase the volume
iPod ® 30pin interface is not in
the correct connection
position
Check the volume of the backup
audio equipment and MENU the
volume to medium.
The video/audio signal input
interface comes loose
Fasten the video/audio signal input
terminal
Remove the iPod ® and reinsert it.
There is noise
on the screen
There is strong magnetic field
interference near the display
screen
Select an appropriate place to
position the device
3.5 mm stereo cable is not
Connect the 3.5 mm stereo cable to
connected to the audio source. the audio source. Make sure that
these signal cables are firmly
The output signal of the
video/audio equipment has
quality problems
Change to a video/audio program
source with better quality
inserted into the correct sockets.
3.5 mm stereo cable is
Unplug the 3.5 mm stereo cable from
the audio source and connect it to
the line out, audio-out or earphone
jack of another audio source (such as
a portable CD player, casMENUte
player, or FM radio) in order to test
the speaker with another audio
source.
connected to an incorrect
audio source output terminal.
The video/audio signal input
interface is making poor
contact
Check whether the plug is inserted
all the way
Speaker
has
Speaker
outputs no
sound
Power is not turned on
Check whether the power plug is
inserted into the wall outlet and into
the power socket.
problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible problem
The audio source has
problems.
Solution
Symptom
Possible problem
Solution
Check whether the iPod ® is
connected at the correct position.
Check whether the 3.5 mm stereo
cable is connected properly. Make
sure that it is connected to the line-
out, audio-out or earphone jack
instead of to the speaker-out of the
sound card or other audio source.
to occur when using high-power
speakers. Try other audio sources,
such as a music CD.
The audio source is distorted
Check the volume of the operating
system and lower it if necessary
Sound is
distorted
(when
The volume of the operating
system is too high
Speaker makes
crackling
Bad connection
Remove the stereo cable from the
audio source equipment and plug it
into the earphone jack of another
audio source (such as a Walkman,
Discman, or FM radio).
connected to a
PC)
noises
Speaker makes
crackling
The volume of the operating
system is too high
Lower the volume
sounds (when
connected to a
PC)
Sound
The volume of the Video-55
system is too high
WAV and .MID files often have
relatively poor sound quality.
Therefore, distortion and noise tend
distortion
Download from Www.Somanuals.com. All Manuals Search And Download.
|