4-665-004-11(1)
Introduction
Connecting the Drive to a Personal
Computer
Inserting and Removing “Memory Stick”
The CRXP-90MU has the following features:
L Can read DVD-ROM discs at a speed of
up to 8×.
Inserting “Memory Stick”
Connect the drive to a personal computer as
shown in the illustration below.
CAUTION
L Comes equipped with a “Memory Stick”
slot.
L Features
technology to prevent buffer under-run
errors.
L Can write CD-R discs at a speed of up to
L Has a compact, lightweight design for
portability.
1 Push “Memory Stick” into the “Memory
Stick” slot until it is fully inserted.
Insert “Memory Stick” until you hear a
click.
• Be sure to read the Quick Start Guide before
connecting the CRXP-90MU to the computer the first
time.
L Includes a compact, lightweight AC
adapter that is compatible with power
supply voltages from 100 to 240 V.
L Provided with a USB 2.0 interface cable.
L When connected to a system supporting
USB 2.0, provides full-performance read
speeds of up to 24× (3600 KB/s).
Portable
CD-RW/DVD-ROM
• Use only the supplied AC adapter and power cord for
connections.
CAUTION
24×.
Be careful in what direction “Memory Stick” is
L Can write CD-RW discs at a speed of up
Insert in the direction of L
inserted. Inserting “Memory Stick” in the wrong
direction may cause damage to the “Memory
Stick” slot and/or “Memory Stick”.
Drive
to 10×.
L Can read CD-ROM discs at a speed of up
to AC power outlet
with “Memory Stick” slot
to 24×.
Removing “Memory Stick”
User’s Guide
Required System Configuration
CAUTION
to USB connector on the PC
Do not remove “Memory Stick” when the “Memory
Stick” busy indicator is lit. Doing so may cause loss of
data on “Memory Stick”.
The CRXP-90MU can be used with a
personal computer with the following
specifications:
CAUTION
• The required system configuration is designed to
provide the basic capability to write CD-R and CD-
RW discs. In order to actually use the CRXP-90MU,
it is necessary to satisfy not only the system
requirements described here, but also the system
requirements that are specified for the writer software.
(The system requirements for writer software usually
exceed the system requirements described here.) Refer
to your Software User’s guides for details.
• system meeting the following requirements is needed
in order to use USB 2.0 operation with this drive.
— USB cable conforming to USB 2.0 (supplied with
this drive)
Precautions for USB Connections
Using the CRXP-90MU with Windows
1 Make sure that the “Memory Stick” busy
indicator is off, and then push “Memory
Stick”.
Connect the CRXP-90MU directly to a USB
port on the computer. Operation through a
hub (including keyboard USB hubs) cannot
be guaranteed.
Once the CRXP-90MU has been set up, the
USB cable can be connected and removed
while the CRXP-90MU and computer
remain turned on. However, for Windows,
Windows PC
L CPU: Pentium II 400 MHz or faster
L RAM: At least 64 MB
we recommend clicking
or
on the
L Hard disk space: 1 GB or more
L OS: Windows 98 Second Edition
(Windows 98 SE), Windows 2000
Professional (Windows 2000), Windows
Millennium (Windows Me), or Windows
XP Home Edition or Professional
(Windows XP)
L Computer with a USB connector
L Computer must have a CD-ROM drive or
be capable of connection to the Internet.
(Used for installing driver software with
Windows 98 SE or Windows 2000.)
task bar and allowing the CRXP-90MU to
stop before removing the cable.
2 Move your hand away and remove
“Memory Stick”.
When you move your hand away,
“Memory Stick” partially comes out so
that you can remove it.
— Computer that is equipped with a USB
2.0-compliant USB connector or PCI adapter
card1), and on which the USB 2.0 EHCI driver
software2) has been installed.
Loading and Ejecting Discs
1) Recommended Product: Adaptec
Loading a Disc
“USB2connect” card (AUA-3100LP)
2) The USB 2.0 EHCI driver software is supplied
with currently available PCI adapter cards that
conform to USB 2.0. Further, Microsoft has
released the USB 2.0 EHCI driver software for
Windows XP, therefore it is also possible to use
this driver software with Windows XP. 3)
3) For details, contact your USB 2.0 adapter dealer
or consult the Microsoft Corporation Web site.
• When connected to a product that conforms to the
earlier USB 1.1 standard, the drive operates at the
fastest transfer speed allowed under USB 1.1.
• Macintosh supports USB1.1 only.
1 Press the eject button to open the top
cover.
The top cover will open slightly by
itself. Lift it all of the way open
manually.
Macintosh
L PowerMac G3, G4, G4 Cube, iMac,
iBook, PowerBook G3, G4
L Mac OS 9.0.4, 9.1, 9.2.1
L At least 64 MB RAM
CRXP-90MU
Eject button
L Macintosh with built in USB connector
(As of April 2002)
2002 Sony Corporation
Printed in Malaysia
Bumper
2 Load a disc.
Push down on the center of the disc until
the disc clicks into place. Do not press
too hard. Also, be careful not to touch
the lens or any other optical parts in the
drive.
Names and Functions of Parts
Main unit
English
List of Accessories
When you unpack the carton, make sure that it contains the and all of the accessories listed
Please refer to this manual together with the “USB Interface Drive User’s Guide” in the attached Software
Disc, which carries more detailed information.
1
below.
CAUTION
Français
If anything is missing or damaged, contact your retailer.
Disc
2
When loading a disc, press the disc’s edge against
the side of the spring-loaded bumper inside the
disc compartment. Make sure that the disc’s
recording surface does not sit on top of the bumper
before closing the drive cover.
Reportez-vous au présent manuel ainsi qu’au document intitulé “Lecteur d’interface USB-Guide de
l’utilisateur” contenu sur le disque du logiciel accompagnant ce produit pour plus de détails.
• CRXP-90MU
• AC Adapter (AC-CRX85)
Deutsch
Einzelheiten entnehmen Sie bitte diesem Handbuch sowie der “Laufwerk mit USB-Schenittstelle-
Anwenderanleitung” auf der mitgelieferten Software-Disc.
9
8
7
6
3
4
Español
Label facing up
Consulte este manual junto con la “Unidad de interfaz USB-Guía del usuario” del disco de software
suministrado, que contiene información más detallada.
Press here.
Disc
• USB Cable
5
Italiano
Fare riferimento al presente manuale insieme a “Guida dell'utilizzatore dell’unità disco con interfaccia USB”
nel disco del software allegato, nel quale sono contenute informazioni più dettagliate.
Português
3 Close the top cover.
Consulte este manual juntamente com o “Guia do Utilizador do Drive de Interface USB” incluído no disco de
software fornecido, para obter informações mais detalhadas.
1 Top Cover
7 Eject Button
You can now access the data on the disc.
• Power cord
• Quick Start Guide
Press this button to open the top cover.
• User’s Guide
• Software Discs
• Ferrite Clamps
• Software Quick Start Guide
• Warranty Card
2 Power Jack (rear of unit)
Nederlands
Connect the AC adapter (provided) here.
Important
Raadpleeg deze handleiding alsook de “USB Station-interface Gebruikershandleiding” op de bijgevoegde
Software Disc, die meer gedetaileerde informatie bevat.
The CRXP-90MU is equipped with an
electronically powered eject mechanism in order to
prevent the top cover from being opened
CAUTION
Note
Never connect any AC adapter other than the one
that was provided with the CRXP-90MU.
Svenska
accidentally while the drive is in operation. As a
result, if the drive is off, pressing the eject button
will not open the top cover. Furthermore, even
when the power is on, depending on the status of
the application that is currently running, the top
cover might not open for one second or longer
after the eject button is pressed.
If the top cover does not open when the eject
button is pressed (unless the drive is currently
writing a disc), press the manual eject lever
(located on the bottom of the drive) in the direction
indicated by the arrow to open the top cover.
To guard against possible loss or damage, be sure to make a backup copy of the provided software discs. The software
discs are not sold separately.
Press here firmly to close.
Förutom denna bruksanvisning finns mer information i “Brukanvisning för enhet med USB gränssnitt” på den
medföljande programskivan.
3 USB Connector
Connect the USB cable (provided) here.
Ejecting a Disc
Before Connecting the USB Cable
4 Power Switch
Attach the ferrite clamps to both ends of the USB cable. To position the center of the ferrite
clamps as shown in the illustration below, wind the USB cable around it once, and then secure
the ferrite clamp by closing it until you hear a click.
1 Press the eject button to open the top cover.
The top cover will open slightly by itself.
Use this switch to turn the CRXP-90MU
on and off.
You can then manually lift it until it opens fully.
5 Manual Eject Lever (bottom of unit)
When the CRXP-90MU is off, push this
lever in the direction indicated by the
arrow to open the top cover.
2 Remove the disc.
Approximately 8 cm
Approximately
8 “Memory Stick” Busy Indicator
When reading or writing data on
“Memory Stick”, the indicator lights
orange.
Hold one finger against the edge of the
disc from the side of the CRXP-90MU,
and press another finger against the
protrusion in the center of the drive to
remove the disc.
8 cm
6 CD/DVD Busy Indicator
When the CRXP-90MU is turned on, the
indicator lights green. When the CD/
DVD drive is in use, the indicator lights
orange.
9 “Memory Stick” Slot
Insert “Memory Stick” here.
Note
CAUTION
To satisfy radio-frequency interference suppression standards, be sure to install the ferrite clamps correctly. They
reduce the possibility interference with other devices.
• Make sure that the disc has stopped spinning
before removing the disc.
• Do not open the top cover while the CD/DVD
busy indicator is orange. Doing so may cause the
computer to freeze up.
Download from Www.Somanuals.com. All Manuals Search And Download.
|