3-074-253-11(1)
CD/DVD
Player
Operating Instructions
DVP-NC655P
© 2002 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
• When you move the player, take out any
discs. If you don’t, the disc may be
damaged.
Precautions
On safety
On adjusting volume
• Caution – The use of optical instruments
with this product will increase eye hazard.
• To prevent fire or shock hazard, do not
place objects filled with liquids, such as
vases, on the apparatus.
Do not turn up the volume while listening to
a section with very low level inputs or no
audio signals. If you do, the speakers may be
damaged when a peak level section is played.
• Should any solid object or liquid fall into
the cabinet, unplug the player and have it
checked by qualified personnel before
operating it any further.
On cleaning
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent
such as alcohol or benzine.
On power sources
• The player is not disconnected from the AC
power source as long as it is connected to
the wall outlet, even if the player itself has
been turned off.
On cleaning discs
Do not use a commercially available cleaning
disc. It may cause a malfunction.
• If you are not going to use the player for a
long time, be sure to disconnect the player
from the wall outlet. To disconnect the AC
power cord, grasp the plug itself; never pull
the cord.
IMPORTANT NOTICE
Caution: This player is capable of holding a
still video image or on-screen display image
on your television screen indefinitely. If
you leave the still video image or on-screen
display image displayed on your TV for an
extended period of time you risk permanent
damage to your television screen.
Projection televisions are especially
susceptible to this.
On placement
• Place the player in a location with adequate
ventilation to prevent heat build-up in the
player.
• Do not place the player on a soft surface
such as a rug that might block the
ventilation holes.
• Do not place the player in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust, or mechanical
shock.
• Do not install the player in an inclined
position. It is designed to be operated in a
horizontal position only.
On transporting the player
Before transporting the player, follow the
procedure below to return the internal
mechanisms to their original positions.
1
2
Remove all the discs from the disc tray.
Press Z to close the disc tray.
Make sure that “NO DISC” appears on
the front panel display.
• Keep the player and discs away from
equipment with strong magnets, such as
microwave ovens, or large loudspeakers.
3
4
Press ?/1 to turn off the player.
The player enters standby mode and the
power indicator lights up in red.
On operation
• If the player is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the player. Should this occur,
the player may not operate properly. In this
case, remove the disc and leave the player
turned on for about half an hour until the
moisture evaporates.
Disconnect the AC power cord.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Welcome!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Index to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Guide to the Control Menu Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 3: TV Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Hooking Up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Step 4: Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Searching for a Particular Point on a Disc (Scan, Slow-motion Play, Search,
Freeze Frame). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Resuming Playback from the Point Where You Stopped the Disc
Using the DVD’s Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Various Play Mode Functions (Program Play, Shuffle Play, Repeat Play,
A-B Repeat Play). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Checking the Play Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Changing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
5
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Manual
This Player Can Play the
Following Discs
• Instructions in this manual describe the
controls on the remote. You can also use the
controls on the player if they have the same
or similar names as those on the remote.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD-Rs, and DVD-RWs.
• The meaning of the icons used in this
manual is described below:
Format of discs
DVD VIDEO
DVD-RW
Icon
Meaning
VIDEO CD
Music CD
Functions available for DVD
VIDEOs or DVD-Rs/DVD-
RWs in video mode
Functions available for DVD-
RWs in VR (Video Recording)
mode
“DVD VIDEO” and “DVD-RW” are
trademarks.
Functions available for VIDEO
CDs or CD-Rs/CD-RWs in
video CD format
Region code
Functions available for DATA
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio
tracks)
Your player has a region code printed on the
back of the unit and only will play DVD
VIDEO discs (playback only) labeled with
identical region codes. This system is used to
protect copyrights.
Functions available for music
CDs or CD-Rs/CD-RWs in
music CD format
* MP3 (MPEG1 Audio Layer 3) is a standard
format defined by ISO (International Standard
Organization)/MPEG which compresses audio
data.
ALL
DVD VIDEOs labeled
this player.
will also play on
If you try to play any other DVD VIDEO, the
message “Playback prohibited by area
limitations.” will appear on the TV screen.
Depending on the DVD VIDEO, no region
code indication may be labeled even though
playing the DVD VIDEO is prohibited by
area restrictions.
X
Region code
DVP–XXXX
00V 00Hz
NO.
00W
0-000-000-00
6
Download from Www.Somanuals.com. All Manuals Search And Download.
software producers. Since this player plays
DVDs and VIDEO CDs according to the disc
contents the software producers designed,
some playback features may not be available.
Also, refer to the instructions supplied with
the DVDs or VIDEO CDs.
Example of discs that the player
cannot play
The player cannot play the following discs:
• All CD-ROMs (including PHOTO CDs)/
CD-Rs/CD-RWs other than those recorded
in the following formats:
Copyrights
–music CD format
–video CD format
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents, other
intellectual property rights owned by
Macrovision Corporation, and other rights
owners. Use of this copyright protection
technology must be authorized by
–MP3 format that conforms to ISO9660*
Level 1/Level 2, or its extended format,
Joliet
• Data part of CD-Extras
• DVD-ROMs
• DVD Audio discs
• HD layer on Super Audio CDs
* A logical format of files and folders on CD-
ROMs defined by ISO (International Standard
Organization).
Macrovision Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Also, the player cannot play the following
discs:
• A DVD VIDEO with a different region
code.
Notes about the Discs
• A disc recorded in a color system other than
NTSC, such as PAL or SECAM (this player
conforms to the NTSC color system).
• A disc that has a non-standard shape (e.g.,
card, heart).
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane
tape or a sticker still left on it.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it
in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
Wipe the disc from the center out.
Note
Some DVD-Rs, DVD-RWs, CD-Rs, or CD-RWs
cannot be played on this player due to the recording
quality or physical condition of the disc, or the
characteristics of the recording device. Also,
images in DVD-RW discs with CPRM* protection
may not be played if they contain a copy protection
signal. “Copyright lock” appears on the screen.
For more information, see the operating instructions
for the recording device.
Note that discs created in the Packet Write format
cannot be played.
* CPRM (Content Protection for Recordable
Media) is a coding technology that protects
copyright for images.
• Do not use solvents such as benzine,
thinner, commercially available cleaners, or
anti-static spray intended for vinyl LPs.
Note on playback operations of
DVDs and VIDEO CDs
Some playback operations of DVDs and
VIDEO CDs may be intentionally set by
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front panel
Lights up in green when the power is on
and lights up in red when the player is in
standby mode.
B DISC SELECT 1 – 5 buttons/
indicators (29)
The number lights up in amber when
there is a disc. When a disc is selected,
the indicator lights up in green.
C
The H button has a tactile dot.*
* Use the tactile dot as a reference when operating
the player.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
When playing back a DVD VIDEO/DVD-RW
Playing status
Lights up when you can
change the angle (54)
Disc numbers (29)
Playing time (48)
Disc type
Current disc
Current audio
Current title and
chapter (48)
Current play
All discs
Disc numbers (29)
Playing status
Disc type
Playing time (48)
Current scene (48)
Current disc
All discs mode (38)
Lights up during A-B Repeat Play (42)
When playing back a CD, DATA CD (MP3 audio), or VIDEO CD (without PBC)
Current track and
index (48)
Disc numbers (29)
Current disc
Playing status
Disc type
Playing time (48)
Lights up when playing
MP3 audio tracks (35)
c continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
C LINE OUT L/R (AUDIO) 1/2 jacks
F COMPONENT VIDEO OUT (Y, PB,
G COMPONENT VIDEO OUT/SCAN
SELECT switch (69)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
The number 5 button has a tactile dot.*
K ./> PREV (previous) /NEXT
L c
/
C SEARCH/STEP
The H button has a tactile dot.*
The + button has a tactile dot.*
U ENTER button (performs the same
function as ed)
Z PICTURE NAVI (picture navigation)
ea
m/M
SCAN/SLOW
* Use the tactile dot as a reference when operating
the player.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Control Menu Display
Use the Control Menu to select a function and to view related information. Press DISPLAY
repeatedly to turn on or change the Control Menu display as follows:
,
Control Menu display 1
m
Control Menu display 2 (DVD/VIDEO CD only)
m
m
Control Menu display off
z Hint
You can skip the ADVANCED display by setting “OFF” under “ADVANCED” in the Control Menu (page
49).
Control Menu
The Control Menu display 1 and 2 will show different items depending on the disc type. For
details, please refer to the pages in parentheses.
Example: Control Menu display 1 when playing a DVD VIDEO
Currently playing disc number
Currently playing title number*
Currently playing chapter number**
Total number of titles*
Playback status
Total number of
(N Playback, X
Pause, x Stop, etc.)
chapters**
Control Menu items
1
PLAY
DVD VIDEO
Typeofdiscbeing
played back
(
(
)
)
1 2 2 7
1 8 3 4
T
Playing time
1 : 3 2 : 5 5
Selected item
OFF
OFF
Current setting
Options
1: ENGLISH
2: FRENCH
3: SPANISH
Function name of
selected Control
Menu item
SUBTITLE
Select:
ENTER
RETURN
Cancel:
Operation
message
* Displays the scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album
number for DATA CDs.
**Displays the index number for VIDEO CDs/CDs, MP3 audio track number for DATA CDs.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Control Menu Items
Item
Item Name, Function, Relevant Disc Type
Selects the disc to be played.
Selects the title, scene, or track to be played.
Selects the chapter or index to be played.
ALBUM (page 44)
Selects the album to be played.
Selects the track to be played.
Selects the index to be played.
ORIGINAL/PLAY LIST (page 33)
Selects the type of titles (DVD-RW) to be played, the ORIGINAL one, or an edited
PLAY LIST.
TIME/TEXT (page 44)
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the DATA CD’s track name.
AUDIO (page 51)
Changes the audio setting.
SUBTITLE (page 55)
Displays the subtitles.
Changes the subtitle language.
ANGLE (page 54)
Changes the angle.
Selects the surround functions.
ADVANCED (page 49)
Displays the information (bit rate or layer) of the disc currently playing.
PARENTAL CONTROL (page 60)
Set to prohibit playback on this player.
c continued
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP (page 67)
QUICK Setup
Use Quick Setup to choose the desired language of the on-screen display, the aspect
ratio of the TV, the audio output, and the appropriate speaker settings.
CUSTOM Setup
In addition to the Quick Setup setting, you can adjust other various settings.
RESET
Returns the settings in “SETUP” to the default setting.
ALL DISCS/ONE DISC (page 38)
Selects All Discs or One Disc mode.
PROGRAM (page 38)
Selects the disc, title, chapter, or track to play in the order you want.
SHUFFLE (page 40)
Plays the disc, title, chapter, or track in random order.
REPEAT (page 41)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/
track/album repeatedly.
A-B REPEAT (page 42)
Specifies the parts you want to play repeatedly.
BNR (page 56)
Adjusts the picture quality by reducing the “block noise” or mosaic like patterns that
appear on your TV screen.
CUSTOM PICTURE MODE (page 57)
Adjusts the video signal from the player. You can select the picture quality that best
suits the program you are watching.
Exaggerates the outline of the image to produce a sharper picture.
PICTURE NAVIGATION (page 45)
Divides the screen into 9 subscreens to help you find the scene you want quickly.
z Hint
The Control Menu icon indicator lights up in green
“OFF.” (“TVS,” “PROGRAM,” “SHUFFLE,” “REPEAT,” “A-B REPEAT,” “BNR,” “DIGITAL VIDEO
ENHANCER” only). The “ANGLE” indicator lights up in green only when the angles can be changed. The
“CUSTOM PICTURE MODE” indicator lights up in green when any setting other than “STANDARD” is
selected.
t
when you select any item except
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Inserting
Batteries into the
Remote
Simple Start Guide
Quick Overview
A quick overview presented in this guide will
give you enough information to start using the
player for your enjoyment. To use the
surround sound features of this player, refer
You can control the player using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries
to the markings inside the compartment.
When using the remote, point it at the remote
sensor
on the player.
Notes
• You cannot connect this player to a TV that does
not have a video input jack.
• Be sure to disconnect the power of each
component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (pinplug × 3 y pinplug
× 3) (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
CD/DVD Player
3 Power source
to LINE OUT
(VIDEO) 1 or 2
to LINE OUT
L/R (AUDIO)
1 or 2
TV
to video input
1 Audio/video
cord (supplied)
to audio input
2 Power source
l : Signal flow
When connecting to a wide screen TV
Depending on the disc, the image of some
discs may not fit your TV screen.
If you want to change the aspect ratio, please
When connecting to a TV that accepts
progressive (480p) format signal
You need to use the COMPONENT VIDEO
OUT jacks to view progressive signals. Hook
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) jack on the player to the TV’s
video input jack, and connect the LINE OUT L/R
(AUDIO) 1/2 jacks to the TV’s audio input jack.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Playing a Disc
Disc compartment number
With the playback side facing down
After Step 6
A Turn on the TV.
Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
(page 34).
B Press [/1 on the player.
C Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
To stop playing
D Press A on the player to open the
Press x.
disc tray.
To remove the disc
Press A.
E Place the disc on the tray with the
playback side facing down.
To turn off the player
Press [/1. The player enters standby mode
and the power indicator lights up in red.
F Press H.
The disc tray closes and the player begins
playing the disc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories,
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
Component video
(yellow)
Audio/video cord
cord (not
(supplied)
supplied)
(green)
(blue)
(red)
TV, projector or AV
amplifier (receiver)
TV, projector or AV
amplifier (receiver)
(yellow)
to COMPONENT
VIDEO OUT
to LINE OUT (VIDEO)
1 or 2
(green) (blue)
(red)
CD/DVD player
to S VIDEO OUT 1 or 2
S VIDEO cord
(not supplied)
TV, projector or AV
amplifier (receiver)
l : Signal flow
18
Download from Www.Somanuals.com. All Manuals Search And Download.
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Yellow (Video)
White (L)
Red (R)
Red (R)
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y/PB/PR)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images. If your TV accepts progressive
(480p) format signals, you must use this connection and set “COMPONENT OUT” to
Green
Blue
Red
Green
Blue
Red
Notes
• Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a
clear image on the TV screen.
VCR
CD/DVD player
TV
Connect
directly
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it
is recommended that you switches the connection to the standard definition output. If there are questions
regarding your Sony TV set’s compatibility with this model 480p DVD player, please contact our customer
service center.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
A
through
D
.
Components to be connected
Connection
Your setup
TV
A
TVS WIDE (page 53)
Stereo amplifier (receiver) and two speakers
or
B
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
C
• Surround effects: Dolby Surround (Pro Logic)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital or DTS** decoder and 6
speakers
D
DTS (5.1ch) (page 73)
*
Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
**“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Connecting to your TV
This connection will use your TV speakers for sound.
CD/DVD player
TV
(yellow)*
(yellow)
(white)
(red)
(white)
Audio/video
cord (supplied)
(red)
to audio input
to LINE OUT L/R
(AUDIO) 1 or 2
l : Signal flow
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
c continued
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
B-1
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
B-2
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
Stereo audio cord
(not supplied)
Coaxial digital
cord (not supplied)
(white)
(red)
or
or
to DIGITAL OUT
(COAXIAL or OPTICAL)
to LINE OUT L/R (AUDIO)
1 or 2
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
(white)
(red)
to coaxial or optical
digital input
to audio input
[Speakers]
Stereo amplifier (receiver)
Front (L)
Front (R)
MD deck/DAT deck
l: Signal flow
z Hint
In connection
Note
B-1
, you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
playing a disc, no sound will come from your
speakers with the
connection.
B-2
22
Download from Www.Somanuals.com. All Manuals Search And Download.
C
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
C-1
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
C-2
CD/DVD player
Stereo
audio cord (not
supplied)
Coaxial digital cord
(not supplied)
(white)
(red)
or
or
to DIGITAL OUT
(COAXIAL or OPTICAL)
to LINE OUT L/R (AUDIO)
1 or 2
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
(white)
(red)
to audio input
[Speakers]
to coaxial or optical digital
input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L)
Rear (R)
Front (L) Front (R)
Rear (mono)
Subwoofer
Center
l: Signal flow
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
c continued
Download from Www.Somanuals.com. All Manuals Search And Download.
23
D
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver). You are unable to enjoy the surround sound effects of this player.
CD/DVD player
to DIGITAL OUT
(OPTICAL)
to DIGITAL OUT
(COAXIAL)
Coaxial digital cord
(not supplied)
Optical digital cord
(not supplied)
or
Remove jack cap
before connecting.
to optical digital
input
to coaxial digital
input
[Speakers]
[Speakers]
AV amplifier (receiver) having
a decoder
Center
Rear (L)
Subwoofer
Front (L)
Rear (R)
Front (R)
l: Signal flow
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen display differs depending on the player model.
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
5
6
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
1
2
3
Turn on the TV.
Press [/1.
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
MODE:
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
“Press [ENTER] to run QUICK SETUP.”
appears at the bottom of the screen. If this
message does not appear, select
AUTO
“QUICK” under “SETUP” in the Control
c continued
25
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
PressX/xto select the setting that
matches your TV type.
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
24 (
through
D
).
A
A
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
Press ENTER.
B-1
C-1
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
The Setup Display for selecting the type
of video signal appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
MODE:
B-2
C-2
D
4:3 LETTER BOX
ON
• Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
JACKET PICTURE
INTERLACE
INTERLACE
PROGRESSIVE
12Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
9
Press X/x to select the type of
signals you wish to output to your
TV.
Choose the signal that matches the audio
24 (
through
).
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
Select “PROGRESSIVE” only if you
and wish to view progressive video
signals.
STANDARD
DOLBY SURROUND
ON
D-PCM
D-PCM
DOLBY DIGITAL
◆ If you have an Interlace format TV
(standard TV)
◆ If you have a Progressive format TV
B-2
C-2
•
D
10Press ENTER.
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
13Press ENTER.
“DTS” is selected.
AUDIO SETUP
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
LINE OUTPUT L/R (AUDIO)
STANDARD
DIGITAL OUTPUT
DOLBY SURROUND
NO
ON
D-PCM
OFF
OFF
ON
11Press X/x to select the type of
jack (if any) you are using to
26
Download from Www.Somanuals.com. All Manuals Search And Download.
14Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
24 (
B
through
D
).
B-2
C-2
D
• ON (only if the amplifier (receiver) has
15Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
24 (
B
through
D
). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 67 for using the Setup Display.
A
• No additional settings are needed.
C-1
B-1
• Set “DOWNMIX” to “DOLBY
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
B-2
C-2
D
• Set “DOWNMIX” to “DOLBY
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press Aon the player, and place a
disc on the disc tray.
Playing Discs
To place other discs on the tray, press
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
Disc
compartment
number
With the playback
side facing down
5
Press H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set “AUTO
POWER OFF” in “CUSTOM SETUP” to “ON”
(page 71).
1
2
Turn on your TV.
Press [/1.
The player turns on and the power
indicator lights up in green.
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
• Set the sound to “STEREO” using the
AUDIO button when you play DTS sound
• Do not play DTS sound tracks without first
connecting the player to an audio
To
Operation
Select a disc
Press DISC SELECT
1–5 on the player
Stop
Press x
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if “DTS” in “AUDIO SETUP” is
and may affect your ears or cause your
speakers to be damaged.
Pause
Press X
Resume play after
pause
Press X or H
Go to the next disc
Press DISC SKIP
Go to the next chapter, Press >
track, or scene in
continuous play mode
Notes on playing DVD VIDEOs with a DTS
sound track
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD VIDEO with DTS
sound tracks, set “DTS” to “ON” in
• If you connect the player to audio
equipment without a DTS decoder, do not
set “DTS” to “ON” in “AUDIO SETUP”
(page 73). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Go back to the
Press .
previous chapter,
track, or scene in
continuous play mode
Stop play and remove Press Z
the disc
Replay the previous
scene (DVD VIDEO
only)
Press REPLAY
Check if a disc is in
the disc compartment The DISC SELECT
indicator for each
Press LOAD.
compartment (1 – 5)
containing a disc
lights up.
The disc number
Additional operations
indicators on the front
panel display (1–5)
light up.
z Hints
• The Replay function is useful when you want to
review a scene or dialog that you missed.
• Before loading the discs, a disc number indicator
of an empty compartment may be lit.
Note
You may not be able to use the Replay function with
some scenes.
c continued
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing discs while playing a
disc (EXCHANGE)
Locking the disc tray (Child
Lock)
You can open the disc tray while playing a
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
You can lock the disc tray to prevent children
from opening it.
1 Press EXCHANGE.
The disc tray opens and two disc
compartments appear. Even if the player
is playing a disc, it doesn’t stop playing.
2 Replace the discs in the
compartments with new ones.
3 Press DISC SKIP.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “LOCKED” appears
on the front panel display.
The disc tray turns and another two disc
compartments appear.
4 Replace the discs in the
compartments with new ones.
The A and EXCHANGE buttons on the
player and the Z button on the remote do not
work while the Child Lock is set.
5 Press EXCHANGE.
The disc tray closes.
z Hint
While the disc tray is open,
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
– If the playback of the current disc end, the player
stops playing. If the disc is played in One Disc
starts playing again.
tracks/chapters are reshuffled only on the current
disc.
Note
Even if you select “RESET” under “SETUP” in the
locked.
– In Program Play mode (page 38), the titles/tracks/
chapters only on the current disc are played.
Note
Do not push the disc tray to close in Step 5, as you
may damage the player.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
available. With each press the indication
changes as follows:
Playback direction
Searching for a
× 2B (DVD/CD only) t FF1M t FF2M
Particular Point on a
Disc (Scan, Slow-motion Play,
Search, Freeze Frame)
Opposite direction
× 2b (DVD only) t FR1m t FR2m
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
The “× 2B”/“× 2b” playback speed is about
twice the normal speed. The “FF2M”/
“FR2m” playback speed is faster than
FF1M”/FR1m.”
Watching frame by frame (Slow-
motion play)
Press
m or M
when the player is
in pause mode. To return to the normal speed,
press H.
Each time you press
m or M
during Slow-motion play, the playback speed
changes. Two speeds are available. With each
press the indication changes as follows:
Playback direction
SLOW2
y SLOW1
Note
Depending on the DVD/VIDEO CD, you may not
be able to do some of the operations described.
Opposite direction (DVD only)
SLOW2 y SLOW1
Locating a point quickly(Search)
The “SLOW2 y”/“SLOW2
” playback
speed is slower than “SLOW1 y”/“SLOW1
.”
During playback, keep pressing C to
locate a point in the playback direction or
keep pressing c to locate a point in the
opposite direction. When you find the point
you want, release the button to return to
normal playback speed.
Playing one frame at a time
When the player is in the pause mode, press
C to go to the next frame. Press c
to go to the preceding frame (DVD only). If
you hold the button down, you can view the
frames in succession. To return to normal
playback, press H.
Locating a point quickly by
playing a disc in fast forward or
fast reverse (Scan)
Press
m or M
while playing a
disc. When you find the point you want, press
H to return to normal speed. Each time you
press
m or M
during scan, the
playback speed changes. Three speeds are
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Resuming Playback from
the Point Where You
Stopped the Disc (Resume
Play/Multi-disc Resume)
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you do Program Play or Shuffle Play
– you change the settings on the Setup Display.
– you open the disc tray.
– you disconnect the power cord.
• When playing a CD and DVD-RW (VR mode),
the point where you stopped is cleared when the
disc tray is opened or the power cord is
disconnected.
The player remembers the point where you
stopped the disc.
• When playing a DATA CD, the point where you
stopped playing is cleared when the player enters
standby mode, the disc tray is opened, or the
power cord is disconnected.
• This function may not work with some discs.
Storing the point where you
stopped the disc (Multi-disc
Resume)
The player stores the point where you stopped
the disc and resumes playback from the same
point the next time you insert the same disc.
The player remembers the stopped point of
the disc even after you play other discs in the
disc tray.
Resume playback points for up to 40 different
DVD VIDEO/VIDEO CD discs remain in
memory even if you disconnect the power
cord. When you store a resume playback
point for the 41st disc, the resume playback
point for the first disc is deleted.
Resuming playback for the
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
1
While playing a disc, press x to
• To turn off the Multi-disc Resume function, set
“MULTI-DISC RESUME” in “CUSTOM
the resume point only for the current disc in the
player.
stop playback.
“RESUME” appears on the front panel
display.
2
Press H.
Note
The player starts playback from the point
where you stopped the disc in Step 1.
This function may not work with some discs.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD’s Menu
Selecting “ORIGINAL” or
“ PLAY LIST” on a DVD-
RW Disc
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as the language for the subtitles
and the language for the sound, select these
items using the MENU button.
Some DVD-RW discs in VR (Video
Recording) mode have two types of titles for
playback: originally recorded titles
(ORIGINAL) and titles that can be created on
recordable DVD players for editing (PLAY
LIST). You can select the type of titles to be
played.
Number
buttons
1
2
Press DISPLAY in stop mode.
The Control Menu appears.
1
Press TOP MENU or MENU.
The disc’s menu appears on the TV
screen.
The contents of the menu vary from disc
to disc.
Press X/x to select
(ORIGINAL/PLAYLIST), thenpress
ENTER.
The options for “ORIGINAL/PLAY
LIST” appear.
2
3
Press C/X/x/c or the number
buttons to select the item you want
to play or change.
1
STOP
DVD-RW
(
(
)
)
1 2 2 7
1 8 3 4
PLAY LIST
PLAY LIST
ORIGINAL
Press ENTER.
z Hint
You can also display the disc’s menu by pressing
the TOP MENU or MENU button on the player.
c continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press X/x to select the setting.
Playing VIDEO CDs with
PBCFunctions(PBCPlayback)
• PLAY LIST: plays the titles created
from “ORIGINAL” for editing.
• ORIGINAL: plays the titles originally
recorded.
Press ENTER.
PBC (Playback Control) allows you to play
VIDEO CDs interactively by following the
menu on the TV screen.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Number
buttons
Note
Repeat Play and A-B Repeat Play do not work
across “ORIGINAL” and “PLAY LIST” titles.
1
2
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
Select the item number and track
you want using X/x or the number
buttons.
3
4
Press ENTER.
Follow the instructions in the
menu for interactive operations.
Refer to the instructions supplied with the
disc, as the operating procedure may
differ depending on the VIDEO CD.
To return to the menu
Press O RETURN.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
To play without using PBC, press ./> while
the player is stopped to select a track, then press H
or ENTER.
“Play without PBC.” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
Playing an MP3 Audio
Track
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
To return to PBC playback, press x twice then
press H.
Note
Depending on the VIDEO CD, “Press ENTER” in
Step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case,
press H.
1
2
Press Z and place a DATA CD on
the disc tray.
Press H.
The disc tray closes, and the player starts
to play the first MP3 audio track in the
first album on the disc.
Notes
• This player can play MP3 audio tracks recorded in
the following sampling frequencies:
32 kHz, 44.1 kHz, 48 kHz.
• The playback order may be different from the
edited order. See “The playback order of MP3
audio tracks” (page 37) for details.
c continued
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting an album and track
About MP3 audio tracks
You can play MP3 audio tracks on CD-
ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to ISO9660
level 1, level 2, or Joliet format for the player
to recognize the tracks.
1
Press MENU.
The list of MP3 albums recorded on the
DATA CD appears.
(
)
1
3 0
You can also play discs recorded in Multi
Session.
See the instructions of the CD-R/RW device
or recording software (not supplied) for
details on the recording format.
R O C K B E S T H I T
K A R A O K E
J A Z Z
R & B
M Y F A V O R I T E S O N G S
C L A S S I C A L
S A L S A O F C U B A
B O S S A N O V A
To play a Multi Session CD
This player can play Multi Session CDs when
an MP3 audio track is located in the first
session. Any subsequent MP3 audio tracks,
recorded in the later sessions, can also be
played back.
When audio tracks and images in music CD
format or Video CD format are recorded in
the first session, only the first session will be
played back.
2
Select an album using X/x and
press ENTER.
The list of tracks contained in the album
appears.
J A Z Z
(
)
1
90
0 1 S H E I S S P E C I A L
0 2 A L L Y O U N E E D I S . . .
0 3 S P I C Y L I F E
Notes
0 4 H A P P Y H O U R
0 5 R I V E R S I D E
• If you put the extension “.MP3” to data not in
MP3 format, the player cannot recognize the data
properly and will generate a loud noise which
could damage your speaker system.
0 6
5
0 7 T A K E T I M E , T A K E T I M E
• The player cannot play audio tracks in MP3PRO
format.
3
Select a track using X/x and press
ENTER.
The selected track starts playing.
When a track or album is being played, its
title is shaded.
To go to the next or previous page
Press c or C.
To return to the previous display
Press O RETURN.
To turn off the display
Press MENU.
Notes
• Only the letters in the alphabet and numbers can
be used for album or track names. Anything else
is displayed as “*”.
• ID3 tags cannot be displayed.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
The playback order of MP3 audio tracks
The playback order of albums and tracks
recorded on a DATA CD is as follows.
Notes
• Depending on the software you use to create the
DATA CD, the playback order may differ from
the illustration above.
◆Structure of disc contents
• The playback order above may not be applicable
if there are more than a total of 999 albums and
tracks in the DATA CD.
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
ROOT
• The player can recognize up to 499 albums (the
player will count just albums, including albums
that do not contain MP3 audio tracks). The player
will not play any albums beyond the first 499
albums. Of the first 499 albums, the player will
play no more than a combined total of 999 albums
and tracks.
album
track
When you insert a DATA CD and press H,
the numbered tracks are played sequentially,
from 1 through 7. Any sub-albums/tracks
contained within a currently selected album
take priority over the next album in the same
tree. (Example: C contains D so 4 is played
before 5.)
When you press MENU and the list of MP3
arranged in the following order: A t B t
C t D t F t G. Albums that do not
contain tracks (such as album E) do not
appear in the list.
z Hints
• If you add numbers (01, 02, 03, etc.) to the front
of the track names, the tracks will be played in
that order.
• Since a disc with many trees takes longer to start
playback, it is recommended that you create the
albums no more than two trees.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Each time you press the button,
(ONE DISC) or
(ALL DISCS) is
Various Play Mode
Functions (Program Play,
Shuffle Play, Repeat Play, A-BRepeat
Play)
selected alternately.
z Hint
You can also select “ALL DISCS/ONE DISC”
You can set the following play modes:
• Program Play (page 38)
Creating your own program
(Program Play)
You can play the contents of a disc in the
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own program.
Note
The play mode is canceled when:
– you open the disc tray.
– the player enters standby mode by pressing [/1.
You can program up to 99 items. By selecting
All Discs mode (page 38), you can create a
program for all of the discs in the player.
Selecting the disc mode (One
Disc or All Discs)
Number
buttons
You can play one disc or all of the discs in the
player. Before setting Program Play, Shuffle
Play, or Repeat Play, you must select whether
to set those play mode on one disc or all of the
discs.
1 Press DISPLAY twice (when playing a
CD, press once).
The Control Menu appears.
2 Press X/x to select
(PROGRAM), then press ENTER.
The options for “PROGRAM” appear.
1 PressONE/ALLDISCS(ONE/ALLonthe
player) during playback.
The following display appears.
(
)
)
1 2 2 7
PLAY
DVD VIDEO
(
1 8 3 4
Disc mode
OFF
OFF
SET
ON
ALL DISCS
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press X/x to select “SET t” then
press ENTER.
6 Select the title, chapter, or track you
want to program.
The display for programming appears.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title
“02.”
PROGRAM
– : – – – –
T
ALL CLEAR
ALL
Press X/x or the number buttons to select
“02” under “T,” then press ENTER.
1. – – – – –
2. – – – – –
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –
PROGRAM
T
C
3 : DVD
ALL CLEAR
ALL
01
02
03
04
05
06
ALL
01
02
03
04
05
06
1. – – – – –
2. – – – – –
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –
4 Press c.
The player is ready to program the first
disc.
PROGRAM
– : – – – –
T
Next, press X/x or the number buttons to
select “03” under “C,” then press
ENTER.
ALL CLEAR
ALL
1. – – – – –
2. – – – – –
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –
PROGRAM
– : – – – –
T
ALL CLEAR
1. 3DVD –T02–C03
ALL
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
2.
3.
4.
5.
6.
5 Select the disc you want to program
using the number buttons or X/x, then
press ENTER.
The cursor moves to the title or track row
“T” (in this case, “01”).
Selected disc, title and chapter
Titles or tracks
Disc type
recorded on a disc
◆ When playing a VIDEO CD or CD
For example, select track “02.”
Press X/x or the number buttons to select
“02” under “T,” then press ENTER.
PROGRAM
3 : DVD
T
C
ALL CLEAR
ALL
01
02
03
04
05
06
ALL
01
02
03
04
05
06
1. – – – – –
2. – – – – –
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –
0:15:30
T
PROGRAM
– : – – – –
ALL CLEAR
1. 3DVD –T02–C03
2. 2VCD –T02
ALL
– – – – –
– – – – –
– – – – –
– – – – –
3.
4.
5.
6.
Chapters recorded on a disc
“?” appears when the player has not played
the disc.
Selected disc and track
c continued
Download from Www.Somanuals.com. All Manuals Search And Download.
39
7 To program other discs, titles,
chapters, or tracks, repeat Steps 3 to
6.
Playing in random order (Shuffle
Play)
The programmed discs, titles, chapters,
and tracks are displayed in the selected
order.
You can have the player “shuffle” titles,
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order. By
selecting All Discs mode (page 38), you can
shuffle all of the discs in the player.
8 Press H to start Program Play.
Program Play begins.
When the program ends, you can restart
the same program again by pressing H.
To stop Program Play
Press CLEAR.
To turn off the display
Press DISPLAY repeatedly until the display
is turned off.
To cancel or change a program
1
Follow Steps 1 to 3 of “Creating your
own program (Program Play).”
2
Select the program number of the disc,
title, chapter, or track you want to cancel
or change using X/x or the number
buttons, and press c.
1 Press SHUFFLE during playback.
The following display appears.
DISC
3
To cancel the program, press C then
CLEAR.
To change the program, follow Step 4 for
new programming.
2 Press SHUFFLE repeatedly to select
the item to be shuffled.
To cancel all the discs, titles, chapters, or
tracks in the program
◆ When playing a DVD VIDEO
• DISC*
• TITLE
1
Follow Steps 1 and 2 of “Creating your
own program (Program Play).”
2
3
Press X and select “ALL CLEAR.”
• CHAPTER
Press ENTER.
◆ When playing a VIDEO CD or CD
• DISC*
• TRACK
z Hint
You can do Repeat Play or Shuffle Play of the
programmed titles, chapters, or tracks. During
Program Play, follow the steps of “Repeat Play”
◆ When playing a DVD-RW or DATA CD
• DISC*
◆ When Program Play is activated
• ON: shuffles titles, chapters, or tracks
selected in Program Play.
Note
You cannot use this function with DATA CDs and
DVD-RWs in VR mode.
* You can select “DISC” in All Discs mode only.
To return to normal play
Press CLEAR, or select “OFF” in Step 2.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hints
Playing repeatedly (Repeat Play)
• You can set Shuffle Play while the player is
stopped. After selecting the “SHUFFLE” option,
press H. Shuffle Play starts.
• Up to 96 chapters in a disc can be played in
random order when “CHAPTER” is selected.
• You can also select “SHUFFLE” from the Control
You can play all of the titles, albums or tracks
on a disc or a single title, chapter, album, or
track repeatedly.
You can use a combination of Shuffle or
Program Play modes. By selecting All Discs
mode (page 38), you can repeat all of the
discs in the player.
1 Press REPEAT during playback.
The following display appears.
DISC
2 Press REPEAT repeatedly to select the
item to be repeated.
◆ When playing a DVD VIDEO
• DISC: repeats all of the titles on the
current disc in One Disc mode, or all of
the discs in All Discs mode.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current
chapter.
c continued
41
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ When playing a DVD-RW
• DISC: repeats all of the titles on the
selected type in One Disc mode, or all
of the discs in All Discs mode.
• TITLE: repeats the current title on a
disc.
Repeating a specific portion (A-
B Repeat Play)
You can play a specific portion of a title,
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics, etc.)
• CHAPTER: repeats the current
chapter.
◆ When playing a VIDEO CD or CD
• DISC: repeats all of the tracks on the
current disc in One Disc mode, or all of
the discs in All Discs mode.
• TRACK: repeats the current track.
◆ When playing a DATA CD (MP3 audio)
• DISC: repeats all of the albums on the
current disc in One Disc mode, or all of
the discs in All Discs mode.
• ALBUM: repeats the current album.
• TRACK: repeats the current track.
◆ When Program Play or Shuffle Play is
activated
• ON: repeats Program Play or Shuffle
Play.
To return to normal play
Press CLEAR, or select “OFF” in Step 2.
1 Press DISPLAY twice during playback
(when playing a CD, press once).
The Control Menu appears.
z Hints
• You can set Repeat Play while the player is
stopped. After selecting the “REPEAT” option,
press H. Repeat Play starts.
• You can also select “REPEAT” from the Control
2 Press X/x to select
(A-B
REPEAT), then press ENTER.
The options for “A-B REPEAT” appear.
(
)
)
1 2 2 7
PLAY
DVD VIDEO
(
1 8 3 4
OFF
SET
OFF
3 Press X/x to select “ SET t,” then
press ENTER.
The “A-B REPEAT” setting display
appears.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
• A-B Repeat Play does not work across multiple
titles (“ORIGINAL” or “PLAY LIST”) on a
DVD-RW in VR mode.
A-B REPEAT
ENTER
Set point A with
.
4 During playback, when you find the
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
A-B REPEAT
ENTER
Set point B with
.
CHAPTER TIME
A: 18
–
1 : 32 : 55
5 When you reach the ending point
(point B), press ENTER again.
The set points are displayed and the
player starts repeating this specific
portion.
(
)
)
PLAY
DVD VIDEO
1 2 2 7
(
1 8 3 4
ON
CHAPTER TIME
A: 18
B: 18
–
–
1 : 32 : 55
1 : 34 : 30
To return to normal play
Press CLEAR.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Notes
• When you set A-B Repeat Play, the settings for
Shuffle Play, Repeat Play, and Program Play are
canceled.
• A-B Repeat Play does not work for titles
containing still pictures on a DVD-RW in VR
mode.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ When playing a DVD VIDEO/DVD-RW
(TITLE)
Searching for a Scene
(CHAPTER)
(TIME/TEXT)
Searching for a Title/
Chapter/Track/Index/
Scene (Search mode)
Select “TIME/TEXT” to search for a
starting point by inputting the time code.
◆ When playing a VIDEO CD
(TRACK)
(INDEX)
◆ When playing a VIDEO CD with PBC
Playback
You can search a DVD by title or chapter, and
you can search a VIDEO CD/CD by track,
index, or scene. As titles and tracks are
assigned unique numbers on the disc, you can
select the desired one by entering its number.
Or, you can search for a scene using the time
code.
(SCENE) or
(INDEX)
◆ When playing a CD
(TRACK)
(INDEX)
◆ When playing a DATA CD (MP3 audio)
Number
buttons
(ALBUM)
(TRACK)
3
4
Select the number of the title,
track, scene, time code, etc. you
want using the number buttons.
For example, to find the scene at 2 hours,
10 minutes, and 20 seconds after the
beginning, select “TIME/TEXT” in Step
2 and enter “2:10:20.”
If you make a mistake
Cancel the number by pressing CLEAR,
then select another number.
1
2
Press SEARCH MODE.
The following display appears.
“-- ( )” appears next to the icon (
**
**
refers to a number).
Press ENTER.
The number in parentheses indicates the
total number of titles, tracks,
indexes, scenes, etc. of the disc.
The player starts playback from the
selected number.
– –( )
10
To turn off the display
Press SEARCH MODE repeatedly until the
display is turned off.
z Hints
Press SEARCH MODE repeatedly
to select the search method.
• You can display the first scene of titles, chapters
or tracks recorded on the disc on a screen divided
into 9 sections. You can start playback directly by
selecting one of the scenes. For details, see
44
Download from Www.Somanuals.com. All Manuals Search And Download.
• You can also select “TITLE,” “CHAPTER,”
“TRACK,” “INDEX,” “SCENE,” “TIME/
TEXT,” “ALBUM,” or “DISC” from the Control
Searching by Scene
(PICTURE NAVIGATION)
Note
You can divide the screen into 9 subscreens
and find the desired scene quickly.
You cannot search for a still picture on a DVD-RW
in VR mode.
1
2
Press PICTURE NAVI during
playback.
The following display appears.
ENTER
TITLE VIEWER
Press PICTURE NAVI repeatedly to
select the item.
Refer to the explanations given for each
item in the following sections.
• TITLE VIEWER (for DVD VIDEO
only)
• CHAPTER VIEWER (for DVD
VIDEO only)
• TRACK VIEWER (for VIDEO CD
only)
• STROBE PLAYBACK
• ANGLE VIEWER (for DVD VIDEO
only)
3
Press ENTER.
c continued
45
Download from Www.Somanuals.com. All Manuals Search And Download.
To return to normal play
Press O RETURN.
Dividing a scene into 9 sections
(STROBE PLAYBACK)
z Hint
You can display 9 consecutive moving
pictures on the screen.
You can also select “PICTURE NAVIGATION”
When you press X after performing Step 3 of
“Searching by Scene” above, the moving
pictures pause.
Notes
• Depending on the disc, you may not be able to
select all functions.
• The sound is muted when using this function.
Displaying different angles
simultaneously (ANGLE VIEWER)
Scanning the title, chapter, or
track (TITLE VIEWER, CHAPTER
VIEWER, TRACK VIEWER)
If various angles (multi-angles) for a scene
are recorded on the DVD VIDEO, you can
display all of the angles recorded on the disc
on the screen divided into 9 sections.
You can divide the screen into 9 subscreens
and display the first scene of titles, chapters,
or tracks.
You can also play back from the selected
angle. After performing Step 3 of “Searching
by Scene” above, select the angle using C/X/
x/c and press ENTER.
You can also play back from the selected title,
chapter, or track. After performing Step 3 of
“Searching by Scene” above, select the scene
using C/X/x/c and press ENTER.
z Hint
If there are more than 9 titles, chapters, or tracks, V
is displayed at the bottom right.
To display the additional titles, chapters, or tracks,
select the bottom right scene (the position 9) and
press x. To return to the previous scene, select the
top left scene (the position 1) and press X.
1
4
7
2
5
8
3
6
9
46
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ When playing a DVD VIDEO or DVD-
RW
• T
Viewing Information About the
Disc
:
:
** ** **
Playing time of the current title
• T–
:
:
** ** **
Remaining time of the current title
Checking the Playing
Time and Remaining
Time
• C
:
:
** ** **
Playing time of the current chapter
• C–
:
:
** ** **
Remaining time of the current chapter
◆ When playing a VIDEO CD (with PBC
functions)
You can check the playing time and
remaining time of the current title, chapter, or
track. Also, you can check the DVD/CD text
or track name (MP3 audio) recorded on the
disc.
•
:
** **
Playing time of the current scene
◆ When playing a VIDEO CD (without
PBC functions) or CD
• T
:
** **
Playing time of the current track
• T–
:
** **
Remaining time of the current track
• D
:
** **
Playing time of the current disc
• D–
:
** **
Remaining time of the current disc
◆ When playing a DATA CD (MP3 audio)
•
:
**** **
Playing time of the current track
To check the DVD/CD text or track and
album names (MP3 audio)
Press TIME/TEXT repeatedly in Step 2 to
display text recorded on the DVD VIDEO/
CD/DATA CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the
text. If the disc does not contain text, “NO
TEXT” appears.
1
2
Press TIME/TEXT during playback.
The following display appears.
T
1:01:57
PLAY
Time
information
BRAHMS SYMPHONY
Press TIME/TEXT repeatedly to
change the time information.
For DATA CDs, the track and album names
The display and the kinds of time that you
can change depend on the disc you are
playing.
c continued
47
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing a VIDEO CD (without PBC
functions) or CD
Checking the information on the
front panel display
Track playing time and current
disc, track and index number
You can view the time information and text
displayed on the TV screen also on the front
panel display. The information on the front
panel display changes as follows when you
change the time information on your TV
screen.
Remaining time of
the current track
When playing a DVD VIDEO or DVD-RW
Playing time of the disc
Remaining time of the disc
Text
Title playing time and current disc, title
and chapter number
Remaining time of the current title
Playing time and
number of the current chapter
Remaining time of
the current chapter
When playing a DATA CD (MP3 audio)
Track playing time and number of the
current disc, album and track
Text
Track name
z Hints
• When playing VIDEO CDs with PBC functions,
the disc number, scene number and the playing
time are displayed.
• Long text that does not fit in a single line will
scroll across the front panel display.
• You can also check the time information and text
Notes
• Depending on the type of disc being played, the
DVD/CD text or track name may not be
displayed.
• The player can only display the first level of the
DVD/CD text, such as the disc name or title.
• Playing time of MP3 audio tracks may not be
displayed correctly.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
To close the ADVANCED window
Select “OFF” in Step 3.
Checking the Play
Information
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
You can check information such as the bit
rate or the disc layer that is being played.
Display of each item
By pressing DISPLAY repeatedly, you can
display either “BIT RATE” or “LAYER,”
whichever was selected in “ADVANCED.”
◆BIT RATE
BIT RATE
Audio
384kbps
Mbps
Video
10
0
5
Bit rate refers to the amount of video/audio
data per second in a disc. While playing a
disc, an approximate bit rate of the playback
picture is displayed as Mbps (Mega bit per
second) and the audio as kbps (kilo bit per
second). The higher the bit rate, the larger the
amount of data. However, this does not
always mean that you can get higher quality
pictures or sounds.
Checking the play information of
DVD (ADVANCED)
◆LAYER
1 Press DISPLAY during playback.
Appears when the DVD
has dual layers
The Control Menu is displayed.
2 Press X/x to select
(ADVANCED), then press ENTER.
The options for “ADVANCED” appear.
1
PLAY
DVD VIDEO
(
(
)
)
1 2 2 7
1 8 3 4
T
Indicates the approximate point where the
disc is playing.
1 : 3 2 : 5 5
OFF
BIT RATE
LAYER
If it is a dual-layer DVD, the player indicates
which layer is being read (“Layer 0” or
“Layer 1”).
BIT RATE
384kbps
BIT RATE
Mbps
10
VIDEO).
0
5
3 Press X/x to select items.
For each item, please refer to “Displays
of each item.”
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the
pick-up point.
4 Press ENTER.
c continued
49
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press AUDIO repeatedly to select
the desired audio signal.
Sound Adjustments
◆ When playing a DVD VIDEO
Depending on the DVD VIDEO, the
choice of language varies.
Changing the Sound
When 4 digits are displayed, they
indicate a language code. Refer to
which language the code represents.
When the same language is displayed two
or more times, the DVD VIDEO is
recorded in multiple audio formats.
When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, MPEG
audio, or DTS), you can change the audio
format. If the DVD is recorded with
multilingual tracks, you can also change the
language.
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the selected
channel through both the right and left
speakers. For example, when playing a disc
containing a song with the vocals on the right
channel and the instruments on the left
channel, you can hear the instruments from
both speakers by selecting the left channel.
◆ When playing a DVD-RW
The types of sound tracks recorded on a
disc are displayed. The default setting is
underlined.
Example:
• 1: MAIN (main sound)
• 1: SUB (sub sound)
• 1: MAIN+SUB (main and sub sound)
◆ When playing a VIDEO CD, CD, or
DATA CD (MP3 audio)
The default setting is underlined.
• STEREO: The standard stereo sound
• 1/L: The sound of the left channel
(monaural)
• 2/R: The sound of the right channel
(monaural)
z Hints
You can also select “AUDIO” from the Control
Displaying the audio information
of the disc
Press DISPLAY during playback to display
the Control Menu. Select “AUDIO” using X/
x. The channels being played are displayed
on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to 5.1
channel signals can be recorded on a DVD
VIDEO. Depending on the DVD VIDEO, the
number of the recorded channels may differ.
1
Press AUDIO during playback.
The following display appears.
:
1 ENGLISH
c continued
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Current audio format*
TV Virtual Surround
Settings (TVS)
PLAY
DVD VIDEO
1
(
(
)
)
1 2 2 7
1 8 3 4
T
1: ENGLISH
1 : 3 2 : 5 5
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
L
C
R
LFE
LS
RS
Currently playing program format**
*“PCM,” “DTS,” or “DOLBY DIGITAL” is
displayed.
This function is designed to work with the
LINE OUT L/R (AUDIO) 1/2 jacks.
Note that if you select one of the TVS
settings, the player does not output the
following signals from the DIGITAL OUT
(COAXIAL or OPTICAL) jack.
—Dolby Digital signals when you set
“DOLBY DIGITAL” in “AUDIO SETUP”
In the case of “DOLBY DIGITAL,” the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2.1
LFE (Low Frequency
Effect) component 1
Front component 2 +
Center component 1
**The letters in the program format display
mean the following sound component:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S:
Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
1
Press SUR during playback.
z Hint
The following display appears.
For Dolby Digital and DTS, “LFE” is always
enclosed in a solid line regardless of the LFE signal
component being output.
TVS DYNAMIC
Note
If “DTS” is set to “OFF” in “AUDIO SETUP”
appear on the screen even if the disc contains DTS
tracks.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
◆TVS STANDARD
2
Press SUR repeatedly to select
one of the TVS sounds.
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below. Use this setting when you want to use
TVS with 2 separate speakers.
Refer to the following explanations given
for each item.
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
L
R
To cancel the setting
Select “OFF” in Step 2.
◆TVS DYNAMIC
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
L : Front speaker (left)
R : Front speaker (right)
: Virtual speaker
TV
z Hints
• You can also select “TVS” by pressing the
SURROUND button on the player.
• You can also select “TVS” from the Control
◆TVS WIDE
Notes
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
• When the playing signal does not contain a signal
for the rear speakers, the surround effects cannot
be heard.
• When you select one of the TVS modes, turn off
the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
TV
• “TVS NIGHT” only works with Dolby Digital
discs. However, not all discs will respond to the
“TVS NIGHT” function in the same way.
• If you use the DIGITAL OUT (COAXIAL or
OPTICAL) jack and set “DOLBY DIGITAL” to
“DOLBY DIGITAL” or “DTS” to “ON” in
“AUDIO SETUP,” sound will come from your
speakers but it will not have the TVS effect.
◆TVS NIGHT
Large sounds, such as explosions, are
suppressed, but the quieter sounds are
unaffected. This feature is useful when you
want to hear the dialog and enjoy the
surround sound effects of “TVS WIDE” at
low volume.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Depending on the DVD VIDEO, you may not be
able to change the angles even if multi-angles are
recorded on the DVD VIDEO.
Enjoying Movies
Changing the Angles
If various angles (multi-angles) for a scene
are recorded on the DVD VIDEO, “ANGLE”
appears in the front panel display. This means
that you can change the viewing angle.
1
2
Press ANGLE during playback.
The number of the angle appears on the
display.
2
Press ANGLE repeatedly to select
the angle number.
The scene changes to the selected angle.
z Hints
• You can display all the angles recorded on the
disc on the same screen, and start playback
directly from the chosen angle. The angles are
displayed on a screen divided into 9 sections. For
• You can also select “ANGLE” from the Control
54
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
You can also select “SUBTITLE” from the Control
Displaying the Subtitles
Note
Depending on the DVD VIDEO, you may not be
able to change the subtitles even if multilingual
subtitles are recorded on it. You also may not be
able to turn them off.
If subtitles are recorded on the discs, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
1
2
Press SUBTITLE during playback.
The following display appears.
1:ENGLISH
Press SUBTITLE repeatedly to
select the language.
◆ When playing a DVD VIDEO
Select the language.
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. Refer to
which language the code represents.
◆ When playing a DVD-RW
Select “ON.”
To turn off the subtitles
Select “OFF” in Step 2.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press ENTER.
Adjusting the Picture
Quality (BNR)
The disc plays with the setting you
selected.
To cancel the “BNR” setting
Select “OFF” in Step 3.
The Block Noise Reduction (BNR) function
adjusts the picture quality by reducing the
“block noise” or mosaic like patterns that
appear on your TV screen.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Notes
• If the outlines of the images on your screen should
become blurred, set “BNR” to “OFF.”
• Depending on the disc or the scene being played,
the “BNR” effect may be hard to discern.
1
2
Press DISPLAY twice during
playback.
The Control Menu appear.
Press X/x to select
(BNR), then press ENTER.
The options for “BNR” appears.
(
)
)
PLAY
DVD VIDEO
1 2 2 7
(
1 8 3 4
OFF
1
2
3
OFF
3
Press X/x to select a level.
• 1: reduces the “block noise.”
• 2: reduces the “block noise” more than
1.
• 3: reduces the “block noise” more than
2.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press PICTURE MODE repeatedly
to select the setting you want.
Adjusting the Playback
Picture (CUSTOM PICTURE MODE)
The default setting is underlined.
• STANDARD: displays a standard
picture.
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the color intensity.
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and the color intensity.
• CINEMA 1: enhances details in dark
areas by increasing the black level.
• CINEMA 2: White colors become
brighter and black colors become
richer, and the color contrast is
increased.
You can adjust the video signal of the DVD or
VIDEO CD from the player to obtain the
picture quality you want. Choose the setting
that best suits the program you are watching.
When you select “MEMORY,” you can make
further adjustments to each element of the
picture (color, brightness, etc.).
• MEMORY: adjusts the picture in
greater detail.
z Hints
• When you watch a movie, “CINEMA 1” or
“CINEMA 2” is recommended.
• The picture can be adjusted by pressing the
PICTURE MODE button on the player as well.
• You can also select the “CUSTOM PICTURE
Adjusting the picture items in
“ MEMORY”
1
Press PICTURE MODE during
playback.
You can adjust each element of the picture
individually.
• PICTURE: changes the contrast
• BRIGHTNESS: changes the overall
brightness
The following display appears.
DYNAMIC 1
• COLOR: makes the colors deeper or lighter
• HUE: changes the color balance
1 Press PICTURE MODE repeatedly to
select “ MEMORY” and press ENTER.
The “PICTURE” adjustment bar appears.
PICTURE
0
c continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press C/c to adjust the picture
contrast, then press ENTER.
The adjustment is saved, and
“BRIGHTNESS” adjustment bar
appears.
Enhancing the Playback
Picture (DIGITAL VIDEO
ENHANCER)
3 Repeat Step 2 to adjust
“BRIGHTNESS,” “ COLOR,” and
“HUE.”
The Digital Video Enhancer (DVE) function
makes the picture appear clear and crisp by
enhancing the outlines of images on your TV
screen. Also, this function can soften the
images on the screen.
The Custom Picture Mode display
appears. You can check each adjustment.
C
0 1 : 3 2 : 5 5
PICTURE
BRIGHTNESS
COLOR
+1
–3
+3
–1
HUE
RESET
RETURN
To turn off the display
Press O RETURN, or select “RETURN” in
Step 3 and press ENTER.
z Hints
• To reset the picture items to the default values,
press c after Step 3 to select “RESET” and press
ENTER.
• When “PLAYBACK MEMORY” in “CUSTOM
SETUP” is set to “ON,” the player will save a
single setting for up to 40 individual discs. (This
does not apply to DVD-RWs in VR mode.)
• If you do not want to save your adjustment in Step
2, you can go to the next picture item by pressing
X/x without saving.
1
2
Press DISPLAY twice during
playback.
The Control Menu appears.
Press X/x to select
(DIGITAL VIDEO ENHANCER), then
press ENTER.
The options for “DIGITAL VIDEO
ENHANCER” appear.
(
)
)
1 2 2 7
PLAY
DVD VIDEO
(
1 8 3 4
OFF
1
2
3
SOFT
OFF
3
Press X/x to select a level.
• 1: enhances the outline.
• 2: enhances the outline more than 1.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
• 3: enhances the outline more than 2.
• SOFT: softens the image (DVD
VIDEO/DVD-RW only)
4
Press ENTER.
The disc plays with the setting you
selected.
To cancel the “ DIGITAL VIDEO
ENHANCER” setting
Select “OFF” in Step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Note
Depending on the disc or the scene being played,
noise found in the disc may become more apparent.
If this happens, it is recommended that you use the
the condition still does not improve, reduce the
Digital Video Enhancer level, or select “SOFT”
(DVD VIDEO/DVD-RW only) in Step 3 above.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press DISPLAY while the player is in
stop mode.
Using Various Additional
Functions
The Control Menu appears.
3 Press X/x to select
(PARENTAL CONTROL), then press
ENTER.
Locking Discs (CUSTOM
PARENTAL CONTROL, PARENTAL
CONTROL)
The options for “PARENTAL
CONTROL” appear.
1
STOP
DVD VIDEO
(
(
)
)
1 2 2 7
1 8 3 4
T
You can set two kinds of playback restrictions
for the desired disc.
• Custom Parental Control
1 : 3 2 : 5 5
You can set playback restrictions so that the
player will not play inappropriate discs.
• Parental Control
ON
PLAYER
PASSWORD
OFF
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
The same password is used for both Parental
Control and Custom Parental Control.
4 Press X/x to select “ ON t,” then
press ENTER.
◆ If you have not entered a password
The display for registering a new
password appears.
Custom Parental Control
PARENTAL CONTROL
You can set the same Custom Parental
Control password for up to 40 discs. When
you set the 41st-disc, the first disc is canceled.
Enter a new 4-digit password, then
ENTER
press
.
Enter a 4-digit password using the
number buttons, then press ENTER.
The display for confirming the password
appears.
Number
buttons
◆ When you have already registered a
password
The display for entering the password
appears.
PARENTAL CONTROL
Enter password, then press ENTER
.
1 Insert the disc you want to lock.
If the disc is playing, press x to stop
playback.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Enterorre-enter your4-digit password
using the number buttons, then press
ENTER.
Parental Control (limited
playback)
“Custom parental control is set.” appears
and the screen returns to the Control
Menu.
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. The
“PARENTAL CONTROL” function allows
you to set a playback limitation level.
To turn off the Custom Parental Control
function
1
2
3
Follow Steps 1 through 3 of “Custom
Parental Control.”
Number
buttons
Press X/x to select “OFF t,” then press
ENTER.
Enter your 4-digit password using the
number buttons, then press ENTER.
To play a disc for which Custom Parental
Control is set
1
Insert the disc for which Custom Parental
Control is set.
The “CUSTOM PARENTAL
CONTROL” display appears.
1 Press DISPLAY while the player is in
stop mode.
CUSTOM PARENTAL CONTROL
Custom parental control is already
The Control Menu appears.
set. To play, enter your password
ENTER
and press
.
2 Press X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
2
Enter your 4-digit password using the
number buttons, then press ENTER.
The player is ready for playback.
1
STOP
DVD VIDEO
(
(
)
)
1 2 2 7
1 8 3 4
z Hint
T
1 : 3 2 : 5 5
If you forget your password, enter the 6-digit
number “199703” using the number buttons when
the “CUSTOM PARENTAL CONTROL” display
asks you for your password, then press ENTER.
The display will ask you to enter a new 4-digit
password.
ON
PLAYER
PASSWORD
OFF
c continued
61
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press X/x to select “PLAYER t,”
then press ENTER.
PARENTAL CONTROL
LEVEL:
STANDARD:
◆ If you have not entered a password
The display for registering a new
password appears.
OFF
USA
USA
OTHERS
PARENTAL CONTROL
Enter a new 4-digit password, then
6 Press X/x to select a geographic area
as the playback limitation level, then
press ENTER.
ENTER
press
.
The area is selected.
When you select “OTHERS t,” select
and enter a standard code in the table on
page 63.
Enter a 4-digit password using the
number buttons, then press ENTER.
The display for confirming the password
appears.
7 Press X/x to select “ LEVEL,” then
press ENTER.
◆ When you have already registered a
password
The selection items for “LEVEL” are
displayed.
The display for entering the password
appears.
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
OFF
PARENTAL CONTROL
8:
7: NC17
6:
5:
Enter password, then press ENTER
.
R
8 Select the level you want using X/x,
then press ENTER.
4 Enterorre-enter your4-digit password
using the number buttons, then press
ENTER.
Parental Control setting is complete.
PARENTAL CONTROL
LEVEL:
STANDARD:
The display for setting the playback
limitation level appears.
4: PG13
USA
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
USA
The lower the value, the stricter the
limitation.
To turn off the Parental Control function
Set “LEVEL” to “OFF” in Step 8.
5 Press X/x to select “STANDARD,”
then press ENTER.
The selection items for “STANDARD”
are displayed.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
To play a disc for which Parental Control is
set
Area Code
Standard
Code
number
Standard
Code
number
1
Insert the disc and press H.
The display for entering your password
appears.
Argentina
Australia
Austria
Belgium
Brazil
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2248
2238
2254
2276
2304
Malaysia
Mexico
2363
2362
2
Enter your 4-digit password using the
number buttons, then press ENTER.
The player starts playback.
Netherlands 2376
New
Zealand
2390
z Hint
Norway
Pakistan
Philippines
Portugal
Russia
2379
2427
2424
2436
2489
2501
2149
2499
If you forget your password, remove the disc and
repeat Steps 1 to 3 of “Parental Control (limited
playback).” When you are asked to enter your
password, enter “199703” using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press H. When the display for entering
your password appears, enter your new password.
Canada
Chile
China
Denmark
Finland
France
Germany
India
Singapore
Spain
Sweden
Notes
Switzerland 2086
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
change the parental control level while playing
the disc. In this case, enter your password, then
change the level. If the Resume Play mode is
cancelled, the level returns to the previous level.
Indonesia
Italy
Thailand
2528
2184
United
Kingdom
Japan
Korea
Changing the password
1 Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
2 Press X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
3 Press X/x to select “PASSWORD
t,” then press ENTER.
The display for entering the password
appears.
4 Enter your 4-digit password using the
number buttons, then press ENTER.
5 Enter a new 4-digit password using the
number buttons, then press ENTER.
6 To confirm your password, re-enter it
using the number buttons, then press
ENTER.
c continued
63
Download from Www.Somanuals.com. All Manuals Search And Download.
If you make a mistake entering your
password
Press C before you press ENTER and input
the correct number.
Operation Sound Effects
(Sound Feedback)
If you make a mistake
Press O RETURN.
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
To turn off the display
Press DISPLAY repeatedly until the display
is turned off.
Operation
Operation sound
One beep
Power is turned on
Power is turned off
H is pressed
Two beeps
One beep
X is pressed
Two beeps
Playback is stopped
One long beep
Three beeps
Operation is not
possible
To set Sound Feedback
1 Press ?/1 on the player or the remote.
The ?/1 indicator lights up in green.
If there is a disc in the player, press A and
remove the disc.
2 Press and hold X on the player for
more than two seconds.
You will hear one beep and the Sound
Feedback function is turned on.
To turn off the Sound Feedback function
When there is no disc in the player, press and
hold X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Code numbers of controllable TVs
ControllingYour TV or AV
Amplifier (Receiver) with
the Supplied Remote
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code
number
Manufacturer Code
number
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
Sony (default) 01
Philco
03,04
Akai
04
04
12
03
Philips
Pioneer
Portland
Proscan
Quasar
Radio Shack
RCA
08,21
16
AOC
Centurion
Coronado
03
10
Notes
Curtis-Mathes 12
06,18
05,14
04,10
12
• Depending on the unit being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
Daytron
Emerson
12
03,04,
14
Sampo
Samsung
Sanyo
Fisher
11
20,3,12
11,14
12
General Electric 06,10
Gold Star
03,04,
17
Scott
Sears
07,10,
11
Hitachi
J.C.Penney
JVC
02,03
04,12
09
Controlling TVs with the remote
Sharp
03,05,
18
KMC
03
Sylvania
Teknika
08,12
Magnavox
03,08,
12
03,08,
14
Number
buttons
Marantz
04,13
Toshiba
Wards
07
MGA/
Mitsubishi
04,12,
13,17
03,04,
12
NEC
04,12
06,19
Yorx
12
15
Panasonic
Zenith
To control the TV
You can control the following items with the
supplied remote.
By pressing
TV [/1
You can
1 Hold down TV [/1, and enter your TV’s
manufacturer’s code (see the table
below) using the number buttons.
Turn the TV on or off
Adjust the volume of the TV
VOL +/–*
WIDE MODE
Switch to or from the wide
mode of a Sony’s wide TV
2 Release TV [/1.
TV/VIDEO
Switch the TV’s input source
between the TV and other
input sources
c continued
65
Download from Www.Somanuals.com. All Manuals Search And Download.
* Once you set the code number for AV amplifier
(receiver), VOL +/– buttons adjust the volume of
AV amplifier. To adjust the volume of TV, set 90
(default) as the code of AV amplifier.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Controlling the volume of your
AV amplifier (receiver) with the
remote
Manufacturer
Sony
Code number
80, 88, 89, 91
84, 85, 86
92, 93
Denon
Kenwood
Onkyo
Number
buttons
81, 82, 83
99
Pioneer
Sansui
87
Technics
Yamaha
97, 98
94, 95, 96
If you do not control an AV amplifier
(receiver)
You can control your TV’s volume by setting
the code number to 90 (default).
1 Hold down [/1, and enter your AV
amplifier (receiver)’s manufacturer’s
code (see the table below) using the
number buttons.
2 Release [/1.
You can control the volume of the AV
amplifier (receiver) using VOL +/–.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press X/x to select “CUSTOM,”
then press ENTER.
Settings and Adjustments
The Setup Display appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
Using the Setup Display
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for the
subtitles and the Setup Display, among other
things. For details on each Setup Display
Press X/x to select the setup item
from the displayed list:
Note
Playback settings stored in the disc take priority
over the Setup Display settings and not all the
functions described may work.
“ LANGUAGE SETUP,” “ SCREEN
SETUP,” “ CUSTOM SETUP,” or
“ AUDIO SETUP.” Then press
ENTER.
The Setup item is selected.
Example: “SCREEN SETUP”
Selected item
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
MODE:
4:3 LETTER BOX
ON
JACKET PICTURE
INTERLACE
AUTO
Setup items
5
Select an item using X/x, then
press ENTER.
1
2
Press DISPLAY when the player is
in stop mode.
The options for the selected item appear.
Example: “TV TYPE”
The Control Menu appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
MODE:
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
Press X/x to select
(SETUP), then press ENTER.
The options for “SETUP” appear.
STOP
AUTO
Options
(
)
47
DVD VIDEO
:
:
QUICK
CUSTOM
RESET
QUICK
c continued
Download from Www.Somanuals.com. All Manuals Search And Download.
67
6
Select a setting using X/x, then
press ENTER.
Setting the Display or
Sound Track Language
(LANGUAGE SETUP)
The setting is selected and setup is
complete.
Example: “16:9”
Selected setting
“LANGUAGE SETUP” allows you to set
various languages for the on-screen display or
sound track.
SCREEN SETUP
TV TYPE:
16:9
ON
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
MODE:
JACKET PICTURE
INTERLACE
AUTO
Select “LANGUAGE SETUP” in the Setup
Display. To use the display, see “Using the
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
To turn off the display
Press DISPLAY repeatedly until the display
is turned off.
To enter the Quick Setup mode
Select “QUICK” in Step 3. Follow from Step
5 of the Quick Setup explanation to make
◆ OSD (On-Screen Display)
Switches the display language on the screen.
◆ MENU (DVD VIDEO only)
You can select the desired language for the
disc’s menu.
To reset all of the “ SETUP” settings
1
Select “RESET” in Step 3 and press
ENTER
◆ AUDIO (DVD VIDEO only)
Switches the language of the sound track.
When you select “ORIGINAL,” the language
given priority in the disc is selected.
2
3
Select “YES” using X/x.
Press ENTER.
73 return to the default settings. Do not
press [/1 while resetting the player as it
takes a few seconds to complete.
◆ SUBTITLE (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select “AUDIO FOLLOW,” the
language for the subtitles changes according to
the language you selected for the sound track.
z Hint
If you select “OTHERS t” in “MENU,”
“SUBTITLE,” and “AUDIO,” select and enter a
language code from “Language Code List” on
page 81 using the number buttons.
Note
When you select a language in “MENU,”
“SUBTITLE,” or “AUDIO” that is not recorded on
the DVD VIDEO, one of the recorded languages
will be automatically selected.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Settings for the Display
(SCREEN SETUP)
Depending on the DVD, “4:3 LETTER BOX” may
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
◆ SCREEN SAVER
Choose settings according to the TV to be
connected.
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play back a CD or
DATA CD (MP3 audio) for more than 15
minutes. The screen saver will help prevent
your display device from becoming damaged
(ghosting). Press H to turn off the screen
saver.
Select “SCREEN SETUP” in the Setup
Display. To use the display, see “Using the
The default settings are underlined.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
4:3 LETTER BOX
ON
ON
Turns on the screen saver.
Turns off the screen saver.
JACKET PICTURE
INTERLACE
OFF
MODE:
AUTO
◆ BACKGROUND
Selects the background color or picture on the
TV screen in stop mode or while playing a
CD or DATA CD (MP3 audio).
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
JACKET
PICTURE
The jacket picture (still picture)
appears, but only when the
jacket picture is already
4:3 LETTER Select this when you connect a
BOX
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
recorded on the disc (CD-
EXTRA, etc.). If the disc does
not contain a jacket picture, the
“GRAPHICS” picture appears.
4:3 PAN
SCAN
Select this when you connect a
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
GRAPHICS A preset picture stored in the
player appears.
BLUE
The background color is blue.
The background color is black.
BLACK
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
◆ COMPONENT OUT
This will change the type of signal output
from the COMPONENT VIDEO OUT jacks
information about the different types.
4:3 LETTER BOX
4:3 PAN SCAN
INTERLACE
Select this when you are
connected to a standard
(interlace format) TV.
PROGRESSIVE Select this when you have
a TV that can accept
progressive signals.
16:9
z Hint
When the player outputs progressive signals, the
PROGRESSIVE indicator lights up.
c continued
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Note
If you select “PROGRESSIVE” when you connect
the player to a TV that cannot accept the signal in
progressive format (480p), the image quality will
deteriorate. In this case, set the COMPONENT
VIDEO OUT/SCAN SELECT switch on the back
panel of the player to INTERLACE. When you can
see the TV screen correctly, set “COMPONENT
OUT” to “INTERLACE” and reset the
When you play video based software with
progressive signals, sections of some types of
images may appear unnatural due to the conversion
process when output through the COMPONENT
VIDEO OUT jacks. Images from the S VIDEO
OUT 1/2 and LINE OUT VIDEO 1/2 jacks are
unaffected as they are output in the interlace format.
COMPONENT VIDEO OUT/SCAN SELECT
switch to SELECTABLE.
When “PROGRESSIVE” is
selected in “COMPONENT OUT”
You can fine-tune the Progressive (480p)
video signal output when you select
“PROGRESSIVE” in “COMPONENT
OUT” of the “SCREEN SETUP” display and
connect the player to the TV that is able to
accept the video signal in progressive format
(480p).
◆MODE (Conversion Modes)
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV, such as dramas and sit-coms, and
displays images at 30 frames/60 fields per
second. Film based software is derived from
film and displays images at 24 frames per
second. Some DVD software contains both
Video and Film.
In order for these images to appear natural on
your screen when output in PROGRESSIVE
mode (60 frames per second), the progressive
video signal needs to be converted to match
the type of DVD software that you are
watching.
AUTO
This will automatically detect
if you are playing Film based
or Video based software and
convert the signal to the
appropriate conversion mode.
Normally select this position.
VIDEO
This will set the conversion
mode for Video based
software, regardless of the type
of software that you are
playing.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
Custom Settings (CUSTOM
SETUP)
AUTO
The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
Use this to set up playback related and other
settings.
FRAME
The picture, including subjects
that do not move dynamically,
is output in high resolution.
Select “CUSTOM SETUP” in the Setup
Display. To use the display, see “Using the
The default settings are underlined.
◆ PLAYBACK MEMORY (DVD VIDEO/
VIDEO CD only)
The player can store the “SUBTITLE” and
other settings of each disc for up to 40 discs
(Playback Memory).
CUSTOM SETUP
AUTO POWER OFF:
AUTO PLAY:
DIMMER:
PAUSE MODE:
PLAYBACK MEMORY:
TRACK SELECTION:
MULTI-DISC RESUME:
OFF
OFF
BRIGHT
AUTO
ON
OFF
ON
Set this function “ON” or “OFF.”
ON
Stores the settings in memory
when you eject the disc.
◆ AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
OFF
Does not store the settings in
memory.
OFF
ON
Switches this function off.
The following settings are stored in memory.
The player enters standby mode
when left in stop mode for more
than 30 minutes.
◆ AUTO PLAY
* DVD VIDEO only
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
Notes
OFF
ON
Switches this function off.
• The player can store the settings of up to 40 discs.
When you store the setting of disc number 41, the
first disc setting is canceled.
• The Playback Memory function cannot be used
for DVD-RWs in VR mode.
Automatically starts playback
when the player is turned on.
◆ DIMMER
Adjusts the lighting of the front panel display.
◆ TRACK SELECTION (DVD VIDEO only)
Gives the sound track which contains the
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
formats (PCM, DTS, or Dolby Digital
format) are recorded.
BRIGHT
DARK
OFF
Makes the lighting bright.
Makes the lighting dark.
Turns off the lighting.
OFF
No priority given.
Priority given.
AUTO
c continued
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Notes
Settings for the Sound
(AUDIO SETUP)
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 68).
“AUDIO SETUP” allows you to set the sound
according to the playback and connection
conditions.
• If you set “DTS” to “OFF” (page 73), the DTS
sound track is not played even if you set “TRACK
SELECTION” to “AUTO.”
• If PCM, DTS, and Dolby Digital sound tracks
have the same number of channels, the player
selects PCM, DTS, and Dolby Digital sound
tracks in this order.
Select “AUDIO SETUP” in the Setup
Display. To use the display, see “Using the
The default settings are underlined.
◆MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
STANDARD
DOLBY SURROUND
ON
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
D-PCM
OFF
ON
Stores the resume settings in
memory for up to 40 discs (The
settings remain in memory even
if you select “OFF.”)
◆ AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the LINE
OUT L/R (AUDIO) 1/2 jacks.
OFF
Does not store the resume
settings in memory. Playback
restarts at the resume point only
for the current disc in the player.
OFF
ON
Normally, select this position.
Select this when the playback sound
from the speakers is distorted.
◆ AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to “AUDIO DRC.” This affects the
output from the following jacks:
– LINE OUT L/R (AUDIO) 1/2 jacks
– DIGITAL OUT (COAXIAL or OPTICAL)
jack only when “DOLBY DIGITAL” is set
to “D-PCM” (page 73).
STANDARD Normally select this position.
TV MODE
Makes the low sounds clear
even if you turn the volume
down.
WIDE
RANGE
Gives you the feeling of being
at a live performance.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ DOWNMIX (DVD only)
Setting the digital output signal
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see “Displaying the
function affects the output of the following
jacks:
– LINE OUT L/R (AUDIO) 1/2 jacks
– DIGITAL OUT (COAXIAL or OPTICAL)
jack when “DOLBY DIGITAL” is set to
Switches the method of outputting audio
signals when you connect a component such
as an amplifier (receiver) or MD deck with a
digital input jack.
Select “DOLBY DIGITAL” and “DTS” after
setting “DIGITAL OUT” to “ON.”
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
OFF
DOLBY
SUR-
Select this when the player is
connected to an audio
ROUND
component that conforms to
Dolby Surround (Pro Logic).
NORMAL Select this when the player is
connected to an audio
If you connect a component that does not
conform to the selected audio signal, a loud
noise (or no sound) will come out from the
speakers, affecting your ears or causing the
speakers to be damaged.
component that does not
conform to Dolby Surround (Pro
Logic).
◆ DIGITAL OUT
◆ DOLBY DIGITAL (DVD VIDEO/DVD-RW
only)
Selects the type of Dolby Digital signal.
Selects if audio signals are output via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack.
D-PCM
Select this when the player is
connected to an audio
ON
Normally select this position. When
you select “ON,” see “Setting the
digital output signal” for further
settings.
component lacking a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
OFF The influence of the digital circuit
upon the analog circuit is minimal.
“DOWNMIX” item in
DOLBY
DIGITAL
Select this when the player is
connected to an audio
component with a built-in
Dolby Digital decoder.
◆ DTS (DVD VIDEO only)
Selects whether or not to output DTS signal.
OFF
Select this when the player is
connected to an audio
component lacking a built-in
DTS decoder.
ON
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
c continued
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
If you select one of the TVS settings while playing
a DVD VIDEO, the player does not output Dolby
Digital signals from the DIGITAL OUT
(COAXIAL or OPTICAL) jack when you set
“DOLBY DIGITAL” in “AUDIO SETUP” to “D-
74
Download from Www.Somanuals.com. All Manuals Search And Download.
, Even if your TV is compatible with
progressive format (480p) signals, the
image may be affected when you set
“COMPONENT OUT” to
Additional Information
“PROGRESSIVE.” In this case, set
“COMPONENT OUT” to “INTERLACE.”
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Even though you set the aspect ratio in “ TV
TYPE” of “SCREEN SETUP,” the picture
does not fill the screen.
, The aspect ratio of the disc is fixed on your
DVD.
Sound
Power
There is no sound.
The power is not turned on.
, Check that the AC power cord is connected
securely.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input
, The amplifier (receiver) input is not
correctly set.
, The player is in pause mode or in Slow-
motion Play mode.
, The player is in fast forward or fast reverse
mode.
, If the audio signal does not come through
the DIGITAL OUT (COAXIAL or
OPTICAL) jack, check the audio settings
Picture
There is no picture/picture noise appears.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
, The disc is dirty or flawed.
, If the picture output from your player goes
through your VCR to get to your TV or if
you are connected to a combination TV/
VIDEO player, the copy-protection signal
applied to some DVD programs could affect
picture quality. If you still experience
problems even when you connect your
player directly to your TV, please try
connecting your player to your TV’s S
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the LINE OUT L/R
(AUDIO) 1/2 jacks or DIGITAL OUT
Sound distortion occurs.
, You have selected “PROGRESSIVE” in
“COMPONENT OUT” even though your
TV cannot accept the signal in progressive
format. In this case, set the COMPONENT
VIDEO OUT/SCAN SELECT switch on
the back panel of the player to
, Set “AUDIO ATT” in “AUDIO SETUP” to
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
and set “DOWNMIX” to “NORMAL”
INTERLACE. When you can see the TV
screen correctly, set “COMPONENT OUT”
to “INTERLACE” and reset the
COMPONENT VIDEO OUT/SCAN
SELECT switch to SELECTABLE.
, Set “AUDIO ATT” in “AUDIO SETUP” to
c continued
75
Download from Www.Somanuals.com. All Manuals Search And Download.
The disc does not start playing from the
beginning.
Operation
The remote does not function.
, There are obstacles between the remote and
the player.
, Program Play, Shuffle Play, Repeat Play, or
A-B Repeat Play has been selected (page
38).
, The distance between the remote and the
player is too far.
, The remote is not pointed at the remote
sensor on the player.
, The batteries in the remote are weak.
The player starts playing the disc
automatically.
, The disc features an auto playback function.
, “AUTO PLAY” in “CUSTOM SETUP” is
The disc does not play.
, The disc is turned over.
Insert the disc with the playback side facing
down on the disc tray.
Playback stops automatically.
, While playing discs with an auto pause
signal, the player stops playback at the auto
pause signal.
, The disc is skewed.
,
, The region code on the DVD does not match
the player.
, Moisture has condensed inside the player
, The player cannot play CD-Rs, CD-RWs,
DVD-Rs, or DVD-RWs (video mode) that
You cannot perform some functions such
as Stop, Search, Slow-motion Play,
Repeat Play, Shuffle Play, or Program
Play.
, Depending on the disc, you may not be able
to do some of the operations above. See the
operating manual that comes with the disc.
The MP3 audio track cannot be played
, The DATA CD is not recorded in the MP3
format that conforms to ISO9660 Level 1/
Level 2 or Joliet.
, The MP3 audio track does not have the
extension “.MP3.”
, The data is not formatted in MP3 even
though it has the extension “.MP3.”
, The data is not MPEG1 Audio Layer 3 data.
, The player cannot play audio tracks in
MP3PRO format.
The language for the sound track cannot
be changed.
, Try using the DVD’s menu instead of the
direct selection button on the remote (page
33).
, Multilingual tracks are not recorded on the
DVD being played.
, The DVD prohibits the changing of the
language for the sound track.
The subtitle language cannot be changed
or turned off.
, Try using the DVD’s menu instead of the
direct selection button on the remote (page
33).
, Multilingual subtitles are not recorded on
the DVD being played.
“Copyright lock” appears and the screen
turns blue when playing a DVD-RW disc.
, Images taken from digital broadcasts, etc.,
may contain copy protection signals, such
as complete copy protection signals, single
copy signals, and restriction-free signals.
When images that contain copy protection
signals are played, a blue screen may appear
instead of the images. It may take a while
when looking for playable images.
, The DVD prohibits the changing of the
subtitles.
The angles cannot be changed.
, Try using the DVD’s menu instead of the
direct selection button on the remote (page
33).
, Multi-angles are not recorded on the DVD
being played.
The title of the MP3 audio album or track
is not correctly displayed.
,
The player can only display numbers and
alphabet. Other characters are displayed as
“*.”
76
Download from Www.Somanuals.com. All Manuals Search And Download.
, The angle can only be changed when the
“ANGLE” indicator lights up on the front
panel display (page 9).
Self-diagnosis Function
(When letters/numbers appear in the
display)
, The DVD prohibits changing of the angles.
The player does not operate properly.
, When static electricity, etc., causes the
player to operate abnormally, unplug the
player.
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen and the front panel
display. In this case, check the following
table.
Nothing is displayed on the front panel
display.
, “DIMMER” in “CUSTOM SETUP” is set
to “OFF.” Set “DIMMER” to “BRIGHT” or
5 numbers or letters are displayed on the
screen and on the front panel display.
, The self-diagnosis function was activated.
First three
Cause and/or corrective
characters of action
the service
number
The disc tray does not open and “ LOCKED”
appears on the front panel display.
C 13
The disc is dirty.
,Clean the disc with a soft
cloth (page 7).
The disc tray does not open and “TRAY
LOCKED” appears on the front panel
display.
C 31
The disc is not inserted
correctly.
,Re-insert the disc
, Contact your Sony dealer or local
correctly.
authorized Sony service facility.
E XX
To prevent a malfunction, the
(xx is a number) player has performed the
self-diagnosis function.
,Contact your nearest
Sony dealer or local
“Data error” appears on the TV screen
when playing a DATA CD.
, The MP3 audio track you want to play is
broken.
authorized Sony service
facility and give the 5-
, The data is not MPEG1 Audio Layer 3 data.
character service number.
Example: E 61 10
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same
as a CD.
The data capacity of a single-layer and single-
sided DVD is 4.7 GB (Giga Byte), which is 7
times that of a CD. The data capacity of a
double-layer and single-sided DVD is 8.5
GB, a single-layer and double-sided DVD is
9.4 GB, and double-layer and double-sided
DVD is 17 GB.
The picture data uses the MPEG 2 format, one
of the worldwide standards of digital
compression technology. The picture data is
compressed to about 1/40 (average) of its
original size. The DVD also uses a variable
rate coding technology that changes the data
to be allocated according to the status of the
picture. Audio information is recorded in a
multi-channel format, such as Dolby Digital,
allowing you to enjoy a more real audio
presence.
Sections of a picture or a music feature that
are smaller than titles. A title is composed of
several chapters. Depending on the disc, no
chapters may be recorded.
Digital audio compression technology
developed by Dolby Laboratories. This
technology conforms to 5.1-channel surround
sound. The rear channel is stereo and there is
a discrete subwoofer channel in this format.
Dolby Digital provides the same 5.1 discrete
channels of high quality digital audio found in
Dolby Digital cinema audio systems. Good
channel separation is realized because all of
the channel data are recorded discretely and
little deterioration is realized because all
channel data processing is digital.
Furthermore, various advanced functions
such as the multi-angle, multilingual, and
Parental Control functions are provided with
the DVD.
Audio signal processing technology that
Dolby Laboratories developed for surround
sound. When the input signal contains a
surround component, the Pro Logic process
outputs the front, center and rear signals. The
rear channel is monaural.
A DVD-RW is a recordable and rewritable
disc with the same size as the DVD VIDEO.
The DVD-RW can be recorded in two
different modes: VR mode and Video mode.
VR (Video Recording) mode enables various
programming and editing functions, some of
which are limited in the case of Video mode.
Video mode complies with DVD VIDEO
format and can be played on other DVD
players while a DVD-RW recorded in VR
mode can only be played on DVD-RW
compliant players. The “DVD-RW”
Digital audio compression technology that
Digital Theater Systems, Inc. developed. This
technology conforms to 5.1-channel surround
sound. The rear channel is stereo and there is
a discrete subwoofer channel in this format.
DTS provides the same 5.1 discrete channels
of high quality digital audio.
appearing in this manual, and the on-screen
displays refer to DVD-RWs in VR mode.
Good channel separation is realized because
all of the channel data is recorded discretely
and little deterioration is realized because all
channel data processing is digital.
Film based software, Video based
DVDs can be classified as Film based or
Video based software. Film based DVDs
contain the same images (24 frames per
second) that are shown at movie theaters.
Video based DVDs, such as television
dramas or sit-coms, displays images at 30
frames (or 60 fields) per second.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Interlace format shows every other line of an
image as a single “field” and is the standard
method for displaying images on television.
The even number field shows the even
numbered lines of an image, and the odd
numbered field shows the odd numbered lines
of an image.
A number that divides a track into sections to
easily locate the point you want on a CD or
VIDEO CD. Depending on the disc, no index
may be recorded.
Compared to the Interlace format that
alternately shows every other line of an image
(field) to create one frame, the Progressive
format shows the entire image at once as a
single frame. This means that while the
Interlace format can show 30 frames (60
fields) in one second, the Progressive format
can show 60 frames in one second. The
overall picture quality increases and still
images, text, and horizontal lines appear
sharper. This player is compatible with the
480 progressive format.
On a VIDEO CD with PBC (playback
control) functions, the menu screens, moving
pictures and still pictures are divided into
sections called “scenes.”
The longest section of a picture or music
feature on a DVD, movie, etc., in video
software, or the entire album in audio
software.
Sections of a picture or a music feature on a
CD or VIDEO CD (the length of a song).
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
General
Laser: Semiconductor laser
Signal format system: NTSC
Power requirements:
120 V AC, 60 Hz
Power consumption: 17 W
Dimensions (approx.): 430 × 108 × 413 mm
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT L/R (AUDIO) 1/2 jacks
only)
(17 × 4 3
/8
× 16 3
in.) (width/height/
/
8
depth) incl. projecting parts
Mass (approx.): 5.1 kg (11 lb 4 oz)
Operating temperature: 5 ° C to 35 ° C
(41 ° F to 95 ° F)
Operating humidity: 25 % to 80 %
Supplied accessories
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
Specifications and design are subject to
change without notice.
ENERGY STARR is a U.S. registered mark.
As an ENERGY STARR Partner, Sony
Corporation has determined that this product
meets the ENERGY STARR guidelines for
energy efficiency.
The signals from LINE OUT L/R (AUDIO)
1/2 jacks are measured. When you play PCM
sound tracks with a 96 kHz sampling
frequency, the output signals from the
DIGITAL OUT (COAXIAL or OPTICAL)
jack are converted to 48 kHz sampling
frequency.
Outputs
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT L/R (AUDIO) 1/2: Phono jack/
2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/–18 dBm (wave length:
660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, PB, PR):
Phono jack/Y: 1.0 Vp-p/PB, PR,:
0.7 Vp-p/75 ohms
LINE OUT (VIDEO) 1/2: Phono jack/
1.0 Vp-p/75 ohms
S VIDEO OUT 1/2: 4-pin mini DIN/
Y: 1.0 Vp-p/C: 0.286 Vp-p /75 ohms
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1369 Nepali
1376 Dutch
1525 Telugu
1527 Tajik
1528 Thai
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto;
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian;
Lettish
1171 Faroese
1174 French
1181 Frisian
1503 Singhalese
1505 Slovak
1506 Slovenian
1345 Malagasy
1703 Not specified
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Control Bar display 12
Setup Display 67
PROGRAM 38
Program Play 38
Numerics
16:9 69
4:3 LETTER BOX 69
4:3 PAN SCAN 69
5.1 Channel Surround 20
Q
QUICK 68
DOWNMIX 73
A
DVD/CD text 47
A-B REPEAT 42
ADVANCED 49
ALBUM 44
R
REPEAT 41
Album 36
ALL DISCS/ONE DISC 38
ANGLE 54
ANGLE VIEWER 45
AUDIO ATT 72
AUDIO DRC 72
AUDIO SETUP 72
AUTO 70
Repeat Play 41
Replacing discs while playing
a disc 30
REPLAY 29
Resume Play 32
F
Fast forward 31
Fast reverse 31
H
S
Handling discs 7
Hooking up 18
S VIDEO output 18
SCENE 44
AUTO PLAY 71
AUTO POWER OFF 71
I
SCREEN SAVER 69
SCREEN SETUP 69
Searching 31
INDEX 44
Index 79
B
BACKGROUND 69
Batteries 15
BNR 56
Selecting a disc 29
SETUP 67
Setup Display 67
SHUFFLE 40
Shuffle Play 40
Skipping a disc 28
Slow-motion Play 31
Speakers
Hooking up 20
STROBE PLAYBACK 45
SURROUND 52
L
LANGUAGE SETUP 68
Locating
a specific point by watching
C
CD 28
CHAPTER 44
the TV screen 31
CHAPTER VIEWER 45
Checking a disc loaded 29
Child Lock 30
M
MENU 68
Menu
COMPONENT OUT 69
Connecting 18
Continuous play
CD/VIDEO CD 28
DVD 28
Control Menu 12
CUSTOM 67
CUSTOM PARENTAL
CONTROL 60
CUSTOM PICTURE MODE
DVD’s menu 33
Top menu 33
MODE 70
T
TITLE 44
TITLE VIEWER 45
TOP MENU 33
TRACK 44
O
On-screen display
Setup Display 67
ORIGINAL 33
ORIGINAL/PLAY LIST 33
OSD 68
TRACK SELECTION 71
TRACK VIEWER 45
Troubleshooting 75
TV TYPE 69
CUSTOM SETUP 71
D
P
TVS (TV Virtual Surround)
DIGITAL OUT 73
Digital output 73
DIGITAL VIDEO
ENHANCER 58
DIMMER 71
Display
PARENTAL CONTROL 60
PAUSE MODE 71
PBC Playback 34
PICTURE NAVIGATION 45
PLAY LIST 33
PLAYBACK MEMORY 71
U
Usable discs 6
V
VIDEO 70
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|