3-864-650-12(1)
St e re o Ca sse t t e
De ck
Operating Instructions
TC-TX333
©1998 by Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Th e TC-TX333 t a p e d e ck is
d e sig n e d o n ly fo r t h e
DHC-MD333 co m p o n e n t
syst e m
Ta b le o f Co n t e n t s
Ge t t in g St a rt e d
Here are some of the features you can use
with this tape deck when connected with the
DHC-MD333 Mini Hi-Fi component system
(see page 4).
Hooking up the system ......................... 4
Op e ra t io n s
Au t o Po w e r On /Off
The tape deck power is tied with the
DHC-MD333 component system (see page 6).
Playing a tape .......................................... 6
Recording a CD ...................................... 8
Recording manually ............................... 9
CD Syn ch ro Re co rd in g
You can easily record a CD onto a tape (see
page 8).
Ad d it io n a l In fo rm a t io n
Precautions ............................................ 10
Troubleshooting ................................... 11
Specifications ......................... Back cover
On e To u ch Pla y
Pressing · or ª on the tape deck when the
tape deck is off automatically turns on the
tape deck and the DHC-MD333, and starts
playing a tape if a cassette is inserted (see
page 7).
Au t o m a t ic So u rce Se le ct io n
You can switch from another source to the
tape deck and start playing a tape just by
pressing · or ª on the tape deck (see page
7).
Tim e r
You can wake up to music or record a radio
programme at a preset time. For details, refer
to “Waking up to music” and “Timer
recording radio programmes” in the
DHC-MD333 component system Instruction
Manual.
Re m o t e Co n t ro l
You can operate the tape deck using the
remote supplied with the DHC-MD333.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ho o kin g u p t h e syst e m
Complete steps 1 through 4 to hook up your system using the supplied cords.
TC-TX333 rear panel
Mains lead
Audio connecting
cords (supplied)
AU BUS
connecting
cord
DHC-MD333 rear panel
No t e
1 Firmly connect the AU BUS
The AU BUS connecting cord is used for exchanging
signals between the tape deck and the DHC-MD333.
If you do not connect the cord firmly, the tape deck
and DHC-MD333 may not operate correctly.
connecting cord to the AU BUS jack
on the DHC-MD333.
A
B
A
DHC-MD333
rear panel
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connect A to A, and B to B
3 Set VOLTAGE SELECTOR to the
using the audio connecting cords.
position of your local power line
Insert the plugs into jacks of the
same colour.
The two audio connecting cords are the
same, so you can connect A or B using
either cord.
voltage (Except for North American
and European countries model).
VOLTAGE SELECTOR
110-120V
220-240V
TC-TX333 rear panel
L
IN
OUT
R
TAPE
A
B
4 Connect the Mains lead to a mains
A
B
after you complete all the
*
**
connections.
If the plug on this tape deck does not fit
your mains, detach the supplied adapter
from the plug (Except for North
American and European countries).
DHC-MD333 rear panel
If t h e re is n o so u n d o r t h e t a p e
d o e s n o t re co rd a t first o p e ra t io n
: sound flow
Make sure the plugs are inserted into the
jacks firmly.
* A
A
The sound signals of the CD, MD and
TUNER flow through the
DHC-MD333 to the tape deck when
you record to tape.
•
If the plugs are not inserted into the A
jacks firmly, you may not be able to record
the sound of the CD, MD and TUNER onto
a tape.
** B
B
•
If the plugs are not inserted into the B
jacks firmly, you may not be able to listen
to the sound of the tape deck.
The sound signal of the tape deck
flows to the DHC-MD333 when you
play a tape.
The plugs of the audio connecting cords may
be tight. Insert the plugs at the point shown
in “How to insert the plugs” in step 2.
Ho w t o in se rt t h e p lu g s
Insert the plugs firmly into the jacks.
Not firmly inserted
Insert to here.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Insert a recorded tape.
Pla yin g a t a p e
You can use any type of tape, TYPE I
(normal), TYPE II (CrO2) or TYPE IV (metal),
since the tape deck automatically detects the
tape type (ATS1)).
With the side you want
to play facing up
1) ATS: Automatic Tape Selection.
Tape deck
TC-TX333
2
§
4
∏
3
4
Set DIRECTION to A to play one
side. Set it to a3) to play both
sides.
DOLBY NR2)
Cassette
indicator
ª
p
3
0/)
The remote
supplied with
the DHC-MD333
Press ·.
Press ª to play the bottom side.
FUNCTION switches to “TAPE”
automatically, then the tape starts
playing.
1
FUNCTION
3)
The tape deck stops automatically after repeating
the sequence five times.
To p la y a t a p e u sin g t h e
DHC-MD333 co m p o n e n t syst e m
Do the following operation in step 4;
TAPEª/·
TAPE0/)
TAPEp
TAPEP
1 Press FUNCTION until “TAPE” appears in
the display.
2 Press TAPE· on the remote.
VOLUME
To play the bottom side, press TAPEª on
the remote.
2)
This tape deck is equipped with the Dolby B-type
noise reduction system.
1
Press
on the DHC-MD333 to
turn on the DHC-MD333
component system.
The tape deck turns on automatically.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip s
Ot h e r o p e ra t io n s
• When you press
tape deck turns on. Press
on the tape deck, only the
on the
To
Press
Stop playing
Pause
p (or TAPEp*).
DHC-MD333 to turn on the DHC-MD333
component system.
• The cassette indicator lights up in red when a
cassette is inserted and goes off when no cassette
is inserted.
• Pressing · or ª when the tape deck is off
automatically turns on the tape deck and starts
playing a tape if there is a cassette inserted (One
Touch Play).
• Inserting the tape when the power is off
automatically turns on the tape deck only. Press
on the DHC-MD333 to turn on the
∏ (or TAPEP*).
Press again to resume playing.
Fast-forward
p, then ) (or TAPE)*) for
the top side.
p, then 0 (or TAPE0*) for
the bottom side.
Rewind
p, then 0 (or TAPE0*) for
the top side.
p, then ) (or TAPE)*) for
the bottom side.
DHC-MD333 component system.
Find the
succeeding
track (AMS**) 0 (or TAPE0*) for the
) (or TAPE)*) for the top
side.
• You can switch from another source to the tape
deck just by pressing · or ª (Automatic
Source Selection).
• To start playing automatically from the beginning
of the tape after fast winding (Auto Play), press
· while holding down 0 (for the top side) or
press ª while holding down ) (for the bottom
side).
bottom side.
Find the
preceding track side.
(AMS**)
0 (or TAPE0*) for the top
) (or TAPE)*) for the
bottom side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, set DOLBY NR to
ON.
Remove the
cassette
§ on the tape deck.
Adjust the
volume
VOLUME +/ – on the remote
(or turn VOLUME on the
DHC-MD333).
• Using the timer function on the DHC-MD333, you
can wake up to music at a preset time. For details,
refer to “Wake up to music” in the DHC-MD333
component system Instruction Manual. When you
set the Wake-up timer, DOLBY NR must be set on
the tape deck.
* Use the remote supplied with the DHC-MD333.
**The Automatic Music Sensor (AMS) feature
detects a blank space of more than four seconds
between tracks to locate tracks quickly.
No t e
The AMS feature may not work in the following
cases:
— the blank space between tracks is four seconds
or less.
— the sound source recorded on the right
channel is different from that on the left
channel as with a KARAOKE tape.
— low volume or low sound continues for a long
time.
— the TV is too close to the tape deck.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Place a CD on the disc tray of the
DHC-MD333.
Re co rd in g a CD
— CD Syn ch ro Re co rd in g
Set DIRECTION to A to record on
one side. Set it to a to record on
both sides.
The CD SYNC button lets you record from a
CD to a tape easily. You can use TYPE I
(normal) or TYPE II (CrO2) tape, since the
tape deck automatically detects the tape type.
5
Press CD SYNC on the tape deck.
The tape deck stands by for recording
and the CD player stands by for
playback. The indicators on the CD
SYNC, rREC, · (for the top side) and
∏ buttons light up.
Tape deck
TC-TX333
2
·
6
If you want to record starting from the
bottom side, press ª (for the bottom
side) so the indicator on the ª button
lights up.
4 Cinadsisceatttoer 5
DOLBY NR*
ª
p
The remote
supplied with
the DHC-MD333
6
Press ∏ on the tape deck.
Recording starts.
1
To st o p re co rd in g
Press p on the tape deck or TAPEp on the
remote.
Tip s
• When you press
tape deck turns on. Press
on the tape deck, only the
on the
TAPEp
DHC-MD333 to turn on the DHC-MD333
component system.
• Inserting the tape when the power is off
automatically turns on the tape deck only. Press
on the DHC-MD333 to turn on the
DHC-MD333 component system before recording.
• The cassette indicator lights up in red when a
cassette is inserted and goes off when no cassette
is inserted.
• When you want to reduce the hiss noise in low-
level high-frequency signals, set DOLBY NR to
ON before step 5.
* This tape deck is equipped with the Dolby B-type
noise reduction system.
1
Press
on the DHC-MD333 to
turn on the DHC-MD333
component system.
The tape deck turns on automatically.
• If the tape reaches the end of the top side during
both sides recording, the fadeout feature prevents
the track from ending abruptly at the end of the
tape (Fade Synchro). The track is recorded again
from the beginning of the bottom side.
• The fadeout feature also works when you record
on one side only.
2
Insert a blank tape.
With the side you want to
record on facing up
No t e s
• You cannot listen to other sources while recording.
• When you record on both sides, be sure to start
from the top side. If you start from the bottom
side, recording stops at the end of the bottom side.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Press FUNCTION on the
DHC-MD333 until “CD,” “MD” or
“TUNER” appears.
Re co rd in g m a n u a lly
With manual recording, you can record just
the songs you like from a CD, or start
recording from the middle of the tape. You
can also record a radio programme or MD.
Set DIRECTION to A to record on
one side. Set it to a to record on
both sides.
Tape deck
TC-TX333
2
· 6
Press rREC on the tape deck.
The tape deck stands by for recording.
The indicators on the rREC, · (for the
top side) and ∏ buttons light up.
If you want to record starting from the
bottom side, press ª (for the bottom
side) so the indicator on the ª button
lights up.
ª p
DOLBY NR* 4
5
Cassette
indicator
The remote
supplied with
the DHC-MD333
6
Press ∏ on the tape deck.
Recording starts.
You can also start recording by pressing
the · or ª button that is lit.
1
3
7
Start playing on the source
component.
To
Press
TAPEp
TAPEP
Stop recording
p (or TAPEp on the
remote)
Pause recording
∏ (or TAPEP on the
remote)
* This tape deck is equipped with the Dolby B-type
noise reduction system.
Tip s
• The cassette indicator lights up in red when a
cassette is inserted and goes off when no cassette
is inserted.
• When you want to reduce the hiss noise in low-
level high-frequency signals, set DOLBY NR to
ON before step 5 .
1
Press
on the DHC-MD333 to
turn on the DHC-MD333
component system.
The tape deck turns on automatically.
• Using the timer function on the DHC-MD333, you
can record radio programmes at a preset time. For
details, refer to “Timer recording radio
programmes” in the DHC-MD333 component
system Instruction Manual. When you set the
timer recording, DOLBY NR and DIRECTION
mode must be set on the tape deck.
2
Insert a blank tape.
With the side you want
to record on facing up
9
Download from Www.Somanuals.com. All Manuals Search And Download.
To sa ve a t a p e p e rm a n e n t ly
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
Pre ca u t io n s
On o p e ra t in g vo lt a g e
(Exce p t fo r No rt h Am e rica n a n d
Eu ro p e a n co u n t rie s m o d e l)
Before operating the tape deck, check that the
operating voltage of your tape deck is identical with
the voltage of your local power supply.
Detector slots
Tab of side B
Tab of side A
On sa fe t y
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet (mains), even if the unit itself has been
turned off.
• Unplug the tape deck from the wall outlet (mains)
if it is not to be used for an extended period of
time. To disconnect the cord (mains lead), pull it
out by the plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
component, unplug the tape deck and have it
checked by qualified personnel before operating it
any further.
Side A
Break off the
cassette tab
of side A
If you later want to reuse the tape for recording,
cover the broken tab with adhesive tape. However,
be careful not to cover the detector slots which allow
the tape player to automatically detect the type of
tape.
• The AC power cord (mains lead) must be changed
only at a qualified service shop.
On p la ce m e n t
• Place the tape deck in a location with adequate
ventilation to prevent heat build-up in the tape
deck.
• Do not place the unit in an inclined position.
• Do not place the unit in locations where it is:
— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibration
— Subject to direct sunlight
Detector slots
Be fo re p la cin g a ca sse t t e in t h e
t a p e d e ck
Take up any slack in the tape. Otherwise, the tape
may get entangled in the parts of the tape deck and
become damaged.
Wh e n u sin g a t a p e lo n g e r t h a n 90
m in u t e s
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Cle a n in g t h e t a p e h e a d s
Clean the tape heads after every 10 hours of use.
When the tape heads become dirty
— the sound is distorted
Tro u b le sh o o t in g
— there is a decrease in sound level
— the sound drops out
— the tape does not erase completely
— the tape does not record.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.
If you run into any problem using this tape
deck, use the following checklist.
First, check that the mains lead is connected
firmly and the speakers are connected
correctly and firmly.
Should any problem persist, consult your
nearest Sony dealer.
De m a g n e t isin g t h e t a p e h e a d s
The operation buttons on the tape deck do
not w ork.
• Press any of the operation buttons after ∏
stops flashing. (The buttons on the tape
deck do not work for about two seconds
after the tape deck turns on.)
Demagnetise the tape heads and the metal parts
that has contact with the tape after every 20 to 30
hours of use with a separately sold demagnetising
cassette. For details, refer to the instructions of the
demagnetising cassette.
• No cassette is inserted. Insert a cassette.
Cle a n in g t h e ca b in e t
The tape does not play or record.
• There is slack in the tape. Take up any
slack in the tape.
Use a soft cloth slightly moistened with mild
detergent solution.
Never use strong solvents, such as thinner or
benzene, since they may damage the finish.
• The heads are dirty. Clean them.
• Make sure the audio connecting cords are
connected correctly (see page 5).
If you have any questions or problems concerning
your tape deck, please consult your nearest Sony
dealer.
The tape does not record.
• No cassette is inserted.
• The tab has been removed from the
cassette. Cover the broken tab with
adhesive tape (see page 10).
• The tape has wound to the end.
The tape does not record or play, or there
is a decrease in sound level.
• The heads are dirty. Clean them.
• The record/ playback heads are
magnetised. Demagnetise them.
The tape does not erase completely.
• The record/ playback heads are
magnetised. Demagnetise them.
There is excessive w ow or flutter, or the
sound drops out.
• The capstans in the tape deck are dirty.
Clean them using a cleaning cassette.
continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le sh o o t in g (co n t in u e d )
Sp e cifica t io n s
Noise increases or the high frequencies
are erased.
• The record/ playback heads are
magnetised. Demagnetise them (see
page 11).
Recording system
Frequency response
4-track 2-channel stereo
(DOLBY NR OFF)
50 – 14,000 Hz ( ±3 dB),
using Sony TYPE I
cassettes
50 – 15,000 Hz ( ±3 dB),
using Sony TYPE II
cassettes
±0.13% W. Peak (IEC)
0.07% W. RMS (NAB)
±0.2% W. Peak (DIN)
TAPE IN (phono jacks):
impedance 47 kilohms
TAPE OUT (phono jacks):
voltage 550 mV
• Move the tape deck away from the TV or
VCR.
The sound is distorted.
• Set DOLBY NR to the same setting in
which the tape was recorded.
• Move the tape deck away from the TV or
VCR.
Wow and flutter
Input
Output
There is no sound.
impedance 47 kilohms
• The mains lead is disconnected from the
mains.
• Make sure the audio connecting cords
are connected correctly (see page 5).
Ge n e ra l
Power requirements
North American model: 120 V AC, 60 Hz
European countries model:
220 – 230 V AC, 50/ 60 Hz
110 – 120 V or 220 – 240 V
AC, 50/ 60 Hz
Adjustable with the
voltage selector
12 W
The remote supplied w ith the DHC-MD333
does not function.
• Press FUNCTION on the DHC-MD333 to
switch the FUNCTION to “TAPE.”
• Make sure the AU BUS connecting cord
is connected correctly (see page 4).
Other models:
Power consumption
Dimensions
Approx. 215 × 60 × 230
mm (w/ h/ d)
incl. projecting parts and
controls
Approx. 2.5 kg
Audio connecting cords
(2)
Automatic Source Selection or One Touch
Play does not w ork.
• Make sure the AU BUS connecting cord
is connected correctly (see page 4).
Mass
Supplied accessories:
The functions tied w ith the
DHC-MD333, such as CD Synchro
Recording, do not w ork.
Design and specifications are subject to change
without notice.
• Make sure the AU BUS connecting cord
is connected correctly (see page 4).
The inserted tape w ill not eject.
•
of the tape deck is OFF. Press
to turn on the tape deck, then press §.
The cassette indicator flashes.
• Press
press
to turn off the tape deck, then
again to turn on the tape deck.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|