swisherinc.com
OWNER’S
MANUAL
MODEL NO.
ZT1436B
ZT18542
ZT2250
“Z” SERIES
ZERO TURN HYDROSTATIC DRIVE
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
before operating this
equipment.
Assembly
Operation
Service and Adjustment
Repair Parts
Rev. 06-039
1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093
PHONE 660-747-8183 FAX 660-747-8650
Made In The
Manufacturing quality lawn care equipment since 1945
USA
ONZTR04
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for choosing Swisher’s Zero Turn Rider Mower. Before
operating your mower, please read, understand and follow all of the safety
precautions and other instructions explained in this manual . As with all power
equipment, lawnmowers can be potentially dangerous if improperly used.
SAFETY PRECAUTIONS & DECALS
This Safety Alert Symbol indicates important messages in this
manual. When you see this symbol, carefully read the message that
follows and be alert to the possibility of personal injury.
Read this manual completely. This machine can amputate hands and feet, and
throw objects. Failure to observe the following safety instructions could result in
serious injury or death.
•
•
Read the manual. Learn to operate this machine safely.
Always disconnect the spark plug wire and place the wire where it cannot contact the
spark plug, to prevent accidental starting the engine when setting up, transporting,
adjusting or making repairs.
•
•
Keep all shields and guards in place.
Understand the speed, steering and stability of this machine. Know the positions and
operations of all controls before you operate this machine. Check all of the controls in
a safe area before starting to work with this machine.
•
•
•
Allow only responsible adults who are familiar with these instructions to operate this
machine. Never allow children to operate this machine.
Clear the area of objects such as rocks, toys, wire, etc. that can be picked up and
thrown by the blade.
Be sure the area is clear of other people before mowing. Be aware of the mower
discharge direction and do not point at anyone. Stop the machine if anyone enters the
mowing area. Children are often attracted to the machine and the mowing activity.
Never assume that children will remain where you last saw them. Keep children
under the watchful care of another responsible adult.
• No riders!
•
Do not put hands or feet near or under rotating parts. Keep clear of the discharge
opening at all times.
•
Do not mow in reverse. Always look down and behind before and during backing.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The operation of any cutter can encounter foreign objects to be thrown into the
eyes, resulting in severe eye damage. Always wear certified safety glasses or
wide-vision safety goggles for over spectacles before starting any cutting
machine and while operating such a machine.
The operation of any cutter produces sound waves that are damaging to the
human ear. Ear protection is recommended.
CAUTION!
Tragic accidents can occur if the operator is not alert to the presence of
children. Children are often attracted to the machine and the mowing
activity. Never assume that children will remain where you last saw
them.
SLOPE OPERATION! ( See page 27 )
Do not operate on slopes greater than 15 degrees.
Use extra caution when mowing on slopes. Operate self-propelled units
up and down slopes. There is a significant risk of overturns when
operating across slopes. If you feel uneasy on a slope then do not mow it.
•
Turn off the blades when not mowing. Before leaving the machine, turn off the blades
and stop the engine.
•
•
Watch for traffic when operating near or crossing roadways.
Do not operate the mower if it has been dropped or damaged in any manner or if the
mower vibrates excessively. Excessive vibration is an indication of damage.
Repair mower as necessary.
•
Dress properly. Do not operate the mower when barefoot or wearing open sandals.
Wear only solid shoes with good traction when mowing.
•
•
•
Never allow operation by untrained persons.
Do not operate the machine while under the influence of alcohol or drugs.
Operate self-propelled machines up and down slopes. There is significant risk of
overturns when operating across slopes. Avoid sudden turns. Operate walk-behind
machines across slopes. There is a significant risk of slipping under a walk-behind
machine when operating up and down slopes.
•
•
Never tamper with safety devices. Check their proper operation regularly.
Stop and inspect the equipment if you strike an object. Repair, if necessary, before
restarting. Never make adjustments or repairs with the engine running. Mower blades
are sharp and can cut. Wrap the blades or wear gloves, and use extra caution when
servicing them. Do not operate at too fast a rate.
•
•
•
Do not mow close to ditches, embankments or drop-offs. An edge could collapse. A
mower wheel over the edge could suddenly turn the unit over.
Do not mow on wet grass if possible. Wet grass causes reduced traction and could cause
sliding. Do not park on a slope unless absolutely necessary.
Always chock or block wheels and set parking brake if parked on slope.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Turn off the blades when not mowing. Before leaving the machine, turn off the blades
and stop the engine.
•
•
Watch for traffic when operating near or crossing roadways.
Do not operate the mower if it has been dropped or damaged in any manner or if the
mower vibrates excessively. Excessive vibration is an indication of damage.
Repair mower as necessary.
•
Dress properly. Do not operate the mower when barefoot or wearing open sandals.
Wear only solid shoes with good traction when mowing.
•
•
•
Never allow operation by untrained persons.
Do not operate the machine while under the influence of alcohol or drugs.
Operate self-propelled machines up and down slopes. There is significant risk of
overturns when operating across slopes. Avoid sudden turns. Operate walk-behind
machines across slopes. There is a significant risk of slipping under a walk-behind
machine when operating up and down slopes.
•
•
Never tamper with safety devices. Check their proper operation regularly.
Stop and inspect the equipment if you strike an object. Repair, if necessary, before
restarting. Never make adjustments or repairs with the engine running. Mower blades
are sharp and can cut. Wrap the blades or wear gloves, and use extra caution when
servicing them. Do not operate at too fast a rate.
•
•
•
Do not mow close to ditches, embankments or drop-offs. An edge could collapse. A
mower wheel over the edge could suddenly turn the unit over.
Do not mow on wet grass if possible. Wet grass causes reduced traction and could cause
sliding. Do not park on a slope unless absolutely necessary.
Always chock or block wheels and set parking brake if parked on slope.
WARNING: Hydraulic fluid can cause severe burns and penetrate skin causing
severe injury or death.
•
•
•
Do not step on mower deck when operating, dismounting or mounting the mower.
Never push or pull unit with another vehicle. Transmission damage will occur.
When transporting be sure to secure mower frame to transport vehicle. NEVER tie
down to moving parts or linkages which may become damaged or come loose.
NEVER transport mower while engine is running.
NEVER add fuel or remove gas cap while engine is running or hot.
NEVER store unit near an open flame such as a water heater or furnace.
NEVER modify or allow anyone to modify or alter any components or safety
devices.
•
•
•
•
•
•
•
ALWAYS keep mower clean and free of debris and grass clippings.
NEVER reverse battery cables. Electric shock will occur.
ALWAYS keep battery away from open flame and sparks. Explosive gases from
battery can cause serious injury or death.
•
ALWAYS wear safety glasses and protective gear when servicing the battery.
Battery fluid contains sulfuric acid. Contact with battery acid on skin or clothing can
cause severe chemical burns.
•
NEVER tip battery beyond a 45 degree angle in any direction.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Danger/Warning Decal – OD99155
Ignition/PTO/Throttle Decal – OD99154
Ignition/PTO/Throttle Decal 50” Mower Only – OD99157
Swisher Flag U.S.A.– OD39
Triangle Danger Decal – OD55
Notice Do Not Alter Wiring Decal– OD74
Operator Must Be Seated Decal– OD73
Parking Brake Decal – OD99152
Flying Debris Decal – OD43
No Step Decal – OD11
DECALS NOT SHOWN
Swisher Z 18.5/42" Decal-Left- OD124
Z 14.5/36" Decal- OD112
Z 22.0/50" Decal- OD123
36" Deck White Decal- OD99159
Swisher Z 14.5/36" Decal- OD108
Z 18.5/42" Decal - OD122
50" Deck White Decal- OD99160
Swisher Z 22.0/50" Decal- Right- OD121
Swisher Z 22.0/50" Decal- Left- OD125
Small Logo White Decal- OD99156
Swisher Patent Decal– OD88
42" Deck White Decal- OD99126
Swisher Z 18.5/42" Decal-Right– OD120
Height of Cut Decal - OD99153
Height Indicator Decal - OD99151
6
Download from Www.Somanuals.com. All Manuals Search And Download.
UNCRATING/ASSEMBLY
•
•
•
•
•
Dispose of top and side panels of the crate.
Remove loose parts and packing material.
Cut any banding or strapping that may be holding the mower to the crate.
Disengage spark plug wire and place where it cannot make a connection.
Assemble the seat and clip wiring harness into the bottom of seat.
NOTICE: Mower will not start unless the seat is connected to the wiring harness.
Raise mower deck to its highest position by turning the handle clockwise.
Set parking brake to Disengage.
•
•
•
Open transmission valves from behind by pushing-IN on each of the levers until they stop;
rotate them to the locked (left) position. (See Page 14)
•
•
Carefully push the mower off the crate to a safe and level area.
Check engine oil. All engines are filled with oil and tested at the factory. Verify oil level and
add if necessary before starting engine. (See Engine Owner’s Manual)
Check the battery. If battery is put into service after the “month & year” of the date on the
battery, then it may need to be charged with a 12 volt battery charger for a minimum of 1 hour,
but no more than 2 hours at a rate of 6 to 10 amps.
•
•
•
Attach battery cable(s) to battery.
Install steering levers. Align steering lever with holes in steering linkage on mower. Keep
levers aligned with each other.
•
Reconnect spark plug wire.
OPERATING YOUR NEW ZERO TURN RIDER MOWER
CONTROLS
•
OPERATOR PRESENCE SYSTEM: This mower is equipped with an operator’s presence
system. Any attempt to leave the seated position with the engine running, without first
disengaging the PTO switch will cause the engine to shut off. Never get off the mower
without placing the steering levers in the neutral position.
WARNING: Do not operate the machine unless the Operator’s Presence System is
functioning as described.
•
PARKING BRAKE: Always set the parking brake before starting. The parking brake is
located on the drivers left hand side. Engage the parking brake by pushing the lever rearward
and down until lever locks into position. Be sure to release parking brake before operating the
machine.
•
•
IGNITION: The ignition switch is located on the drivers right hand side toward the rear of
the seat. The ignition switch has three positions: OFF, ON, START.
THROTTLE: The throttle\choke control is located on the drivers right hand side towards the
front of the seat. For maximum performance and battery charging, operate mower at full
throttle. When starting a cold engine, place lever forward in the full choke position. After start
up, move throttle rearward to full throttle position. Move lever all the way to the rear for
lowest setting before shutting off engine. The 50” Model has a push/pull choke mounted on
the right side fender for easier cold weather starts. Pull out to choke (start) engine.
•
•
PTO SWITCH: The PTO, or Power Take Off switch is used to engage the blades of the
mower. When the PTO switch is pulled out the blades will be engaged. When the PTO switch
is pushed in the blades will be disengaged. The PTO switch must be pushed in to complete the
Operator’s Presence System to start engine.
NEUTRAL LOCK: The steering levers must be in the outward and locked position for the
mower to start. ( See page 11)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWING
WARNING: Do not operate mower at too fast of a rate. Sudden movements forward and
backward at fast speeds can cause accidents resulting in personal injury.
•
Start out moving steering levers SLOWLY forward and backward until you learn to operate
the unit. NOTE: This mower has been designed to be very maneuverable. Practice in open,
flat areas is extremely necessary to become comfortable and efficient with the controls.
•
•
•
BEGIN TO MOW: Before starting the engine, set the desired deck height.
Start the mower engine.
Position the throttle lever about halfway and engage PTO switch. Reposition throttle lever
to full throttle position.
•
Move steering levers forward to begin mowing.
CAUTION: Always make sure the deck is not plugged with grass or other debris. Failure
to do this will cause damage to the PTO belt.
•
•
STOPPING: Hydrostatic mowers use hydrostatic braking through the transmissions. To
slow or stop the unit move the steering levers to the neutral position
STOPPING THE ENGINE: Move the throttle lever to slow position, allow engine to idle
for 30 seconds and turn ignition to off position. CAUTION: Failure to position the ignition
key to any position except off will cause discharge of the battery.
STARTING MOWER
•
TO START: Position steering handles outward to neutral locked position. Engage parking
brake. Extend throttle to full choke position. Start ignition and slide throttle lever back to full
throttle position. Allow engine to warm up for 1 minute. Release parking brake. Model
ZT2250 has a remote choke assembly located on the right fender, behind the rider.
•
FORWARD MOVEMENT: Position steering handles inward to the drive position. To move
the mower forward gently push both steering levers forward equal distance from the neutral
position. The further you move the levers forward the faster you will travel. CAUTION
steering levers have quick response timing.
•
•
BACKWARD MOVEMENT: To move the mower backwards, gently pull back on the
steering levers the same distance from neutral. The further you pull back the faster you will
travel. NOTE it is normal for the reverse speed to be less than the forward for easier turning.
TURNS: For left turn, move the right lever farther forward then the left. For right turn, move
the left lever farther forward than the right. To obtain a tight turning radius, GENTLY reverse
one lever and push the other lever forward. CAUTION: Aggressive turns can damage lawns.
Do not make turns with the inside wheel stopped. It it better to keep both wheels turning
slightly.
•
DECK HEIGHT ADJUSTMENT: To raise the mower deck up and down, simply rotate the
lever located in front of the seat above the floor plate. Clockwise raises the deck.
Counterclockwise lowers the deck. The deck is adjustable from 1 ½” to 3 ½”.
•
•
For best performance, tall grass should be mowed once in the highest position and once again
at desired cut height. Never cut more than1/3 the height in one cutting.
ENGAGING BLADES: Operator must be seated for operation of blades. With engine to full
throttle position, pull UP on PTO switch located between the throttle and the key switch. To
disengage blades, push DOWN on PTO switch.
•
STOPPING ENGINE: Place both levers in the outward neutral locked position. Push PTO
switch in to disengage. Place throttle lever to lowest setting and let idle for 30 seconds. Turn
off ignition key and engage parking brake.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE SCHEDULE
INSPECT BEFORE EACH USE
•
•
•
•
Loose fasteners: Be sure all fasteners are at proper torque. Especially guards and
blades.
Parking brake: If brake does not keep unit from rolling, brake must be adjusted or
repaired.
Tires: Always check and maintain proper tire pressure (See tire sidewall for
recommendation). Check for damage due to sharp rocks, objects or stumps.
Operator Presence System: The engine should not start unless the PTO switch is
disengaged and the control levers are locked in the neutral position. Any attempt to
leave the seated position with the PTO switch engaged will kill the engine.
•
Oil level: To prevent damage to engine, always check and maintain proper oil level.
Never operate engine with the oil level below the add mark on the dipstick. Be sure
to tighten the dipstick securely after inspection. Refer to engine manual for additional
information.
INSPECT EVERY 8 HOURS
•
Proper cleaning: Remove any build up of grass, dirt or debris with a brush or cloth
from engine, battery, deck and and transaxles. Do not use harsh chemicals or
abrasives. Keep all painted surfaces and wheels free of oil and gasoline. Protect all
painted surfaces with an automotive wax. Do not spray unit with water or store
outdoors unprotected. Water can invade sealed bearings and reduce component life.
Do not spray water onto hydrostatic transmissions. This will
cause injection of water into the unit causing failure.
•
•
Air filter: The engine will not run properly with a dirty or damaged air filter. Check
filter before starting the engine. Check for buildup of dirt or debris. Replace if bent,
clogged, or damaged.
Oil level: To prevent damage to engine, always check and maintain proper oil level.
Never operate engine with the oil level below the add mark on the dipstick. Be sure to
tighten the dipstick securely after inspection.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSPECT EVERY 25 HOURS
•
Lubrication: Grease all pivot points with a high temp grease.
•
Battery, check and clean: Keep battery terminals clean and tight. Periodic charging
will extend its life. Clean terminals with a wire brush and coat with a petroleum jelly.
Change engine oil and filter: Use only quality detergent oil. See engine manual for
instructions. Select viscosity grade according to your expected environmental
temperature.
•
•
•
Blades: Best results will come from sharp blades. Replace if bent, damaged or worn.
Engine air screen: Screen must be clean and free of debris for proper engine cooling.
Clean with a brush or cloth. Do not spray with pressurized water.
•
Muffler: Inspect for damage or corrosion. Keep free of grass or debris to prevent fire.
INSPECT EVERY 100 HOURS
•
Clean engine cooling fins: Clogged cooling fins can damage engine due to
overheating. Keep fins and external surfaces of the engine clean.
•
Replace air filter: The engine will not run properly with a dirty or damaged air filter.
Check filter before starting the engine.Check for buildup of dirt or debris. Replace if
bent, clogged, or damaged. See engine manual for detailed instructions.
Replace spark plugs: See engine manual for detailed instructions.
•
INSPECT EACH SEASON
•
•
•
Belts:Check belts for wear and deterioration. See service and adjustments.
Spark plug: See engine manual for detailed instructions.
Replace in-line fuel filter: Replace every season.
INSPECT BEFORE STORAGE
•
•
•
Change engine oil and filter: See engine manual for detailed instructions.
Lubrication: Grease all pivot points with a high temp grease.
Check battery: Keep battery terminals clean and tight. Periodic charging will extend
its life. Clean terminals with a wire brush and coat with a petroleum jelly.
Loose fasteners: Be sure all fasteners are at proper torque, especially guards and
blades.
•
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE / ADJUSTMENTS
CAUTION: Before performing any service or adjustments do as follows:
1. Turn off PTO switch.
2. Position unit on smooth flat surface.
3. Place steering levers in outward, neutral-locked position.
4. Turn ignition key “OFF” and set parking brake.
5. Wait for all moving parts to stop and disconnect spark plug wire.
TRACKING
Adjustments to the unit may need to be made if the unit does not track in a straight line. The
primary reason for the unit not tracking straight is incorrect or unbalanced tire pressure.
Before making any adjustments first check and adjust the tire pressure. DO NOT EXCEED
MAXIMUM RECOMMENDED TIRE PRESSURE.
ADJUST LINKAGE: Place steering levers outward locking them in the neutral position.
Turn off engine and raise seat. Under the seat are (4) adjustment bolts. The two adjustment
bolts toward the seat mount are adjustments for the forward travel. The two bolts toward the
engine are for the reverse travel. Clockwise movement for these will decrease or slow the
travel speed of the individual side. Counterclockwise movement will increase the travel of the
individual side. The linkage is factory set to maximum performance. Adjustment is made by
rotating the adjustment bolt clockwise on the opposite side that the unit tracks toward. Adjust
forward and reverse to track straight as needed. When accomplished adjustment to the
steering levers may need to be done. This is made by loosening the the two bolts on the
steering lever and aligning with the other. Travel of the steering levers from front to rear may
be accomplished in the same manner.
Neutral-Lock Position
Steering levers out.
Tracking Adjustment
Diagram
Decrease Speed
Increase Speed
Adjustment bolts
Both sides
Front of
Mower
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOVING THE MOWER DECK
1.
2.
3.
4.
Turn off engine and engage parking brake.
Rotate cutting height lever counterclockwise to lowest cutting position.
Remove bolt from pickup point located at the front of the deck.
Remove cotter pins on rear hanger points and slide out stabilizer bars.Disconnect
tension spring bolt from tension bracket.
5.
6.
Remove belt from mower pulley and electric clutch.
Slide mower deck from under unit.
INSTALLING THE MOWER DECK
1.
2.
3.
4.
Be sure the cutting height lever is in the lowest position.
Position mower deck under unit.
Install belt around mower pulley and electric clutch.
Install stabilizer bars into rear hanger brackets through lift points and install cotter
pins. Be sure eye bolt is between bracket sides.
5.
6.
Install bolt in front hanger bracket passing through eyebolt in the same manner as
rear and tighten snug.
Reattach tension spring bolt and tighten.
NOTE: It is recommended to
remove the deck to sharpen the
blades.
Remove belt
12
Download from Www.Somanuals.com. All Manuals Search And Download.
LEVELING THE MOWER DECK
1.
2.
Position unit on a smooth level surface.
For side to side leveling, measure the distance from the floor to the bottom edge at the
rear of the deck. The measurement should be equal within 1/16 inch side to side.
Adjustment can be made by loosening locking nut on rear eyebolt hangers and adjusting
up or down as needed.
3.
For front to rear pitch adjustment, loosen locking nut on front eyebolt and adjust up or
down as needed. Proper pitch measurement is 1/8” to 1/4” lower at the front of the deck.
Front of Mower
Front of deck should be
slightly lower.
Distance should be
equal on both rear sides.
Ground
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BELTS
Clutch drive belt replacement
1. Remove belt covers.
50”
2. Disconnect tension idler from tension
bracket.
Part #: 3816
3. Remove belt from mower pulley and electric
clutch.
4. Install new belt onto electric clutch and
mower pulley and check for proper routing
and clearance.
5. Reconnect idler tension bolt to tension
bracket.
42”
36”
Hydrostats belt replacement
1. Remove clutch drive belt. See clutch belt
replacement.
2. Disconnect wiring from electric clutch.
3. Disconnect idler spring from tension bracket.
4. Remove bolt and washer from bottom of
electric clutch and slide clutch from engine
crankshaft, set aside.
Part #: 3752
5. Remove belt from transaxles and engine
pulley.
6. Install new belt. Check for proper routing
and clearance.
Part #: 3820
66LR- Transmission Belt
7. Reinstall electric clutch carefully aligning
keyed portion of clutch and keyway in
crankshaft. Reinstall bolt and washer.
Washer is “cupped” be sure to place
“cupped” side of washer towards the clutch
body.
8. Reconnect tension idler to tension bracket.
9. Reconnect wiring harness to electric clutch.
10. Reinstall clutch drive belt. See clutch drive
belt replacement.
Hydraulic Release
Push-IN and lock to the left.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING DIAGRAMS
36” and 42” Mowers
50” Mower
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE SETUP
1
Item #
Description
Part #
N/A
N/A
1
14 HP B&S Engine (36" Mower)
18.5 HP B&S Engine (42" Mower)
22 HP B&S Engine (50" Mower)
5/16-18 Serrated Flange Nut
Spacer Engine Pulley
N/A
2
3
4
5
6
7
NB170
BB105SL
3753
Motor Pulley 3"
1/4 X 1/2 Key Stock
4258
689S
688ECDP
3813
699
NB705
Engine Pulley Spacer Short .687
Electric Clutch Drop Pulley
Electric Clutch (50" Mower Only)
Washer Belleville Engine Pulley
7/16-20 X 3.25 HCF GR5 ZP
10
12
11
8
9
2
10 5/16-18 X 1 1/4 Serrated Flange Bolt NB253
11
12
Oil Drain Valve
Oil Drain Valve Cap
AS122
AS123
3
5
4
FUEL SUPPLY SYSTEM
6
Item #
13
Description
Gas Cap
Part #
6102NC
AS100
3258TK
NB170
NB556
NB253
NB109
AS140
AS120
AS119
7
14
Gas Tank Plastic Black
Gas Tank Bracket
5/16-18 Serrated Flange Nut
5/16 USS Flat Washer ZP
5/16-18 X 1 1/4 Serr. Flange Bolt
1/4-20 X 1/2 Bolt
15
16
8
17
18
19
9
20
21
22
Fuel Line
Elbow
Rubber Bushing
13
14
Not Pictured
Description
Solenoid Assembly (All Models)
Wiring Harness (36 and 42" Models Only)
Wiring Harness (50" Models Only)
Hour Meter (50" Models Only)
Battery Cable 10" Red
Part #
9043
3720
3804-04
3803
BCSR
BCLB
BCBT
U1L
22
20
21
18
Battery Cable 19 1/2" Black
Battery Cable Small Rubber Boot
12 Volt Lawn and Garden Battery
Battery Hold Down, 15" Tarp Strap
Electric Clutch to Wiring Harness Jumper
(50" Models Only)
15
16
BHOLD
19
3814
17
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Item #
1
2
3*
4
Description
Wire Link For Idler Arm
Clutch Rod Spring
5/16-18 Serrated Flange Nut
5/16-18 X 1 HCC GR5 ZP
Transmission Idler Arm
1/2-13 X 3 HCC GR5 Bolt ZP
3/8-16 X 1 1/2 HCC GR5 ZP
3/8 SAE Washer
Idler Pulley
3/8-16 2-Way Lock Nut
1/2-13 Jam Nut
5/16-18 Nyloc Nut
Hydro Release
Wheel Spacer
Wheel Hub Lug Nut 1/2-20
Rear Tire For 36"
Part #
BRS6H
682S
NB170
NB501
3690TK
NB131
NB107
NB272
B27
NB280
NB118
NB181
3678TK
3825
Note: Spring #2 must pivot freely on
bolt #4 to prevent pre-mature failure.
5
6
7
8
7
8
9
10
11
12
13
16*
17
18
4
1
9
6
8
2203LN
3755
3604
10
Rear Tire For 42"
2
Rear Tire For 50"
Transaxle Left
Transaxle Right
3756
3601CB
3600CB
24
19
20
5
12
11
21*
22*
23
Belt Snubber (50" Only)
5/16-18 X 3/4 Serr Flg Bolt
1/2-13 Nyloc Nut
3819TK
NB596
NB281
NB558
23
13
24
5/16-18 ZP 2 Way Lock Nut
* 50” only
3*
16*
22*
21*
20
19
PARTS NOT SHOWN
18
(Zero Turn Rider Trans Mounting Hardware)
17
Description
5/16-18 X 4 HCC GR5 ZP
5/16-18 X 2 3/4 HCCGR2ZP
5/16 SAE Washer
Part #
NB513
NB106
NB275
NB181
Description
1/4-20 X 1 HCC GR5 ZP
1/4 SAE Washer
Part #
NB102
NB274
NB180
NB524
5/16-18 Nyloc Nut
1/4-20 Nyloc Nut
1/4-20 Flange Nut
17
Download from Www.Somanuals.com. All Manuals Search And Download.
STEERING (RIGHT SIDE SHOWN)
24
21
26
1
4
11
5
18
20
17
10
22
19
23
16
29
30
14
12
27
25
11
3
10
28
33
15
16
6
12
31
32
13
8
4
7
5
9
2
Item #
Description
Part #
3673
Item #
18
19
20
21
Description
Part #
NB448
NB103
3698TK
3621TK
3620TK
3669
NB310
NB254
NB558
NB281
3706
NB262
NB263
NB190
NB265
NB264
1
2
Directional Handle Grip
Right Handle-Weldment
Left Handle-Weldment
5/16-24 ZP 2-Way Lock Nut
1/4-20 X 1 1/4 HTC GR5 ZP
Universal Pivot Plate Weldment
Control Card Right
3839TK
3846TK
NB596
NB170
NB177
NB682
3841TK
3840TK
3699TK
3700TK
NB688
NB121
TR150W
NB510
3721
3
4
5
6
7
5/16-18 X 3/4 Serr Flg Bolt
5/16-18 Serrated Flange Nut
1/2 NR Mach Bushing 14 GA
Control Card Left
22
23
24
25
26
27
28
29
30
31
32
33
Tinnerman Clips 5/16-18 Heavy Duty
1/4-20 X 3/4 SSC Plain
5/16-18 X 1 1/2 Flge Serr. Bolt
5/16-18 ZP 2 Way Lock Nut
1/2-13 Nyloc Nut
1/2 ID X 7/8 OD X 1/8 Nylon Washer
Right Handle Mount Weldment
Left Handle Mount Weldment
Pivot Plate Right Weldment
Pivot Plate Left Weldment
1/2-13 Nyloc Jam Nut
8
Tinnerman Clip 5/16-18
Left & Right Thread Rod
Ball Linkage Right
9
10
11
12
13
14
15
16
17
1/2-13 2-Way Jam Lock Nut
Washer
1/2-13 X 2 1/2 HCC GR5 ZP
1/4 Rod End Male1/4-28
1/4 Rod End Female 1/4-28
1/4-20 Nylok Nut
5/16-24 Jam Nut
5/16-24 Jam Nut Left-Hand Thread
Ball Linkage Left
3708
5/16-18 X 1 1/4 Serrated Flange Bolt NB253
NB180
NB524
NB215
1/4-20 Flange Nut
5/16-24 Hex Nut
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT BASE ASSEMBLY
Item #
1
Description
Seat 15" Back No Arm Rest (36" Mower Only)
Seat 15" Back With Arm Rest (42" Mower Only)
Seat 18" Back With Arm Rest (50" Mower Only)
Seat Plate
Part #
3790
3791
1
3792
2
3
4
5
6
7
8
9
10
11
3133TK
NB743
3833TK
NB181
3706
NB596
NB116
NB173
3844
3393TK
3645TK
3390Z
3651
3613TK
3613TC
NB170
NB556
3609
5/16-18 Shoulder Bolt
Seat Bracket
5/16-18 Nyloc Nut
2
7
3
Tinnerman Clip 5/16-18
5/16-18 X 3/4 Serr Flg Bolt
5/16 ID X 1 1/4 OD 11GA Black Nylon Washer
5/16-18 Jam Nut
16
4
15
SEE CONTROL
COVER DETAIL
THIS PAGE
5
T Knob 5/16-18
Control Cover
14
13
9
Control Cover (36" Mower Only)
Brake Linkage Rod
E-Brake Link Rod (36" Mower Only)
Seat Mount ( 42" & 50" Mower)
Seat Mount (36" Mower)
12
13
12
11
6
14
15
16
5/16-18 Serrated Flange Nut
5/16 USS Flat Washer ZP
Tapered Spring
10
7
8
Parking Brake For
42” & 50” Mowers
See Page 20 For
Further Details And
36” Mower Set-Up
CONTROL COVER
18
22
19
Item #
17
18
Description
PTO Switch
Key Switch
Part #
3605
3623
17
19
Key Switch Nut
9087
Key Switch Washer (Not Shown)
1/4-20 X 1/2 MSC ZP Hex Washer
Throttle Cable Assembly (36" & 42" Mowers)
Throttle Control 35" (50" Mower Only)
"T" Knob only
9088
NB114
3640
3788
4226K
3646TK
20
20
21
21
22
Control Cover Instruments (Right Side)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PARKING BRAKE
8
6
5
1
2
6
8
4
7
Item #
Description
Brake Mount Plate
1/8 X 1 Cotter Pin
Brake Linkage Rod
5/16-18 Nyloc Nut
Part #
3267TK
NB126
3390Z
NB181
NB558
NB556
NB202
NB170
T2SM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
5/16-18 ZP 2 Way Lock Nut
5/16 USS Flat Washer ZP
5/16-18 X 1 Eye Bolt
5/16-18 Serrated Flange Nut
Spring (2 speed)
9
12
3
Parking Brake Weldment
T Knob 5/16-18
3797TK
3844
11
10
5/16-18 Jam Nut
NB173
NB116
NB620
NB135
NB579
3653TK
3651
12
13
16
5/16 11GA Black Nylon Washer
1/4-28 X 3/4 GR5 ZP
1/4 Split Lock Washer
5/16 X 1 1/4 OD Fender Washer
E-Brake Handle
15
14
E-Brake Side link
5/16-18 X 1 1/2 GR5 Bolt
5/16-18 X 1 GR5 Bolt
NB505
NB501
42” & 50” Mowers
8
6
5
9
17
4
5
18
6
8
4
8
19
20
6
36” Mowers Only
20
Download from Www.Somanuals.com. All Manuals Search And Download.
FRAME for 36” Mower
4
5
21
6
9
27
3
5
28
1
29
2
3
7
26
44
10
25
3
11
23
2
30
12
8
3
SEE DETAIL
PAGE 20
43
20
9
18
33
31
3
16
22
12
3
22
18
32
15
24
39
35
17
19
40
35
38
35
37
36
34
Item #
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
43
44
Description
Part #
NB620
3651
Item #
Description
Beverage Retainer
5/16-18 X 1/2 Serr. Flg Bolt
5/16-18 Serrated Flange Nut
36" Mower Fender Left
36" Mower Fender Right
5/16-18 X 3/4 Serr Flg Bolt
Fender Mount
Seat Base Weldment
1/4-20 X 2 1/2 HTC GR5 ZP
1/4-20 Flange Nut
Access Plate Weldment
Kick Plate
Part #
3643TK
NB252
NB170
3742TK
1/4-28 X 3/4 GR5 ZP
E-Brake Side Link
Bumper Weldment
Upper Motor Base
Rear Cover
1
2
3
4
3686TK
3611TK
3711TK
3837TK
NB622
3797TK
3267TK
NB181
AS249
NB195
3754
NB126
5072
NB687
CB58
NB274
3696TK
3742RTK
NB596
3654TK
3719TC
NB163
NB524
3269TK
3630TK
NB254
3261TK
NB121
NB510
3264TK
3639TK
3653TK
NB250
NB515
3712TK
Transmission Mount
5
6
7
8
5/16-18 X 2 1/4 Flange Serr. GR5 ZP
Parking Brake Weldment
Brake Mount Plate
5/16-18 Nyloc Nut
9
Caster Debris Cap
13/16 X 1 1/4 X 1/8 Washer
Tire
10
11
12
15
16
17
18
19
20
21
22
23
5/16-18 X 1 1/2 Flange Serr. Bolt
Front Frame Weldment
1/2-13 2-Way Jam Lock Nut
1/2-13 X 2 1/2 HCC GR5 ZP
Rear Hanger Bracket
1/8 X 1 Cotter Pin
Caster Weldment ZP
3/4 Push Nut Blk Plastic
Bearing, Flanged 3/4 ID
1/4 SAE Washer
Frame Side Weldment
E-Brake Handle
1/4-20 X 3/4 GR5 ZP
Battery Box
5/16-18 X 1 3/4 Flange Serr. Bolt
Transmission Fan Cover-Left
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FRAME for 42” Mower
2
31
33
7
1
6
4
3
9
5
5
8
30
29
10
28
12
11
27
18
14
12
8
8
25
15
16
32
13
SEE DETAIL
PAGE 19 & 20
26
18
25
17
22
19
24
20
21
20
23
22
Item #
Description
Part #
3643TK
3012TK
3011TK
5142TK
3696TK
NB596
3837TK
3611TK
NB170
Item #
Description
Front Axle-Weldment
1/2-13 X 2 1/2 HCC GR5 ZP
13/16 X 1 1/4 X 1/8 Washer
Caster Fork
5/8 ID X 1 OD 10 GA Washer
5/8-11 X 7 HCC GR5 ZP
Wheel Spacer
Front Tire
5/8-11 2 Way Lock Jam Nut
Bearing
5/16-18 X 2 1/2 HCC GR5 ZP
3/4-16 Jam Nylok Nut
Kick Plate
Part #
3401TK
NB510
NB195
665TK
NB178
NB624
3395
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1
2
Beverage Retainer
Fender-Right
Fender-Left
3
4
5
6
7
8
9
10
Fender Mount
Battery Box
5/16-18 X 3/4 Serr Flg Bolt
Transmission Mount
Upper Motor Base
5/16-18 Serrated Flange Nut
Rear Cover
Transmission Fan Cover-Left
Transmission Fan Cover-Right
Bumper Weldment
3009
NB595
B98
3711TK
3712TK
3806TK
3686TK
NB138
NB122
3396TK
3397TK
3719TK
NB524
NB254
NB250
11
Access Plate
Seat Base Weldment
1/4-20 Flange Nut
12 5/16-18 X 2 1/4 Flang Serr. GR5 ZP NB622
13
14
15
5/16-18 X 1 3/4 Flge Serr Bolt
Rear Hanger Bracket
1/2-13 2-Way Jam Lock Nut
NB515
3264TK
NB121
5/16-18 X 1 1/2 Flge Serr. Bolt
1/4-20 X 3/4 GR5 ZP
22
Download from Www.Somanuals.com. All Manuals Search And Download.
FRAME for 50” Mower
2
33
34
7
35
8
9
6
4
32
3
5
1
5
8
10
30
28
29
31
11
27
18
14
8
13
25
15
16
12
13
SEE DETAIL
PAGE 19 & 20
26
25
22
17
18
19
24
20
21
20
23
22
Item #
1
2
Description
Part #
Item #
Description
13/16 X 1 1/4 X 1/8 Washer
Caster Fork
5/8 ID X 1 OD 10 GA Washer
5/8-11 X 7 HCC GR5 ZP
Wheel Spacer
Front Tire
5/8-11 2 Way Lock Jam Nut
Bearing
5/16-18 X 2 1/2 HCC GR5 ZP
3/4-16 Jam Nylok Nut
Kick Plate
Part #
NB195
665TK
NB178
NB624
3395
3010
NB595
B98
NB138
NB122
3396TK
3397TK
3719TK
3819TK
NB252
NB524
NB250
3810TK
Beverage Retainer
Fender-Right
Fender-Left
Fender Mount
Battery Box
3643TK
3012TK
3011TK
5142TK
3696TK
NB596
3835TK
3777TK
NB170
3711TK
3806TK
3712TK
3778TK
NB254
NB515
3264TK
NB121
3401TK
NB510
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
3
4
5
6
7
8
9
10
5/16-18 X 3/4 Serr Flg Bolt
Transmission Mount
Upper Motor Base
5/16-18 Serrated Flange Nut
Rear Cover
Transmission Fan Cover-Right
Transmission Fan Cover-Left
Bumper Weldment
5/16-18 X 1 1/2 Flge Serr. Bolt
5/16-18 X 1 3/4 Flge Serr Bolt
Rear Hanger Bracket
Access Plate
Seat Base Weldment
Belt Snubber
11
12
13
14
15
16
17
5/16-18 X 1/2 Serr. Flg Bolt
1/4-20 Flange Nut
1/4-20 X 3/4 GR5 ZP
Choke Mount
1/2-13 2-Way Jam Lock Nut
Front Axle-Weldment
1/2-13 X 2 1/2 HCC GR5 ZP
23
Download from Www.Somanuals.com. All Manuals Search And Download.
1
DECK LIFT
Item #
1
2
3
4
Description
Plastic Knob - Black
3/8-16 2-Way Lock Nut
5/16 USS Flat Washer ZP
3/8-16 X 1 1/4 GR5 ZP
Part #
4857
NB280
NB556
NB618
2
16
3
5
6
7
8
Spacer 3/4 OD X .515 ID DOM X 1.125 3379
4
5
15
Rear Height Lifter
1/2-13 Nyloc Nut
3/8-16 Nyloc Nut
3705TK
NB281
NB182
3684TK
NB501
3663TK
3683TK
3260TK
NB619
T151
3266TK
NB509
NB174
NB204
NB281
NB275
NB181
14
13
6
8
9
Rear Torsion Weldment
5/16-18 X 1 HCC GR5 ZP
Lift Pivot
Front Torsion Weldment
Front - Back Height Link
3/8-16 X 2 1/2 HTC GR5 ZP
Banded Thrust Bearing
Height Adjust Crank
1/2-13 X 2 HCC GR5 ZP
3/8-16 Jam Nut ZP
7
10
11
12
13
14
15
16
17
18
19
20
21
22
12
2
9
21
22
18
3/8-16 X 2 1/4 Eye Bolt
1/2-13 Nyloc Nut
10
5/16 SAE Washer
5/16-18 Nyloc Nut
22
19
21
11
10
20
17
19
HEIGHT ADJUST
INDICATOR
Description
Item #
Part #
23
Height Adjust Indicator
Height Adjust Indicator Decal OD99151
Height Adjust Indicator Bracket 3845TK
3671TK
25B
23
24
24
25
8-32 Nut
NB201
NB689
NB507
NB558
NB181
25B
26
8-32 Machine Screw
5/16-18 X 2 GR5 Bolt
5/16-18 2 way Lock Nut
5/16-18 Nyloc Nut
25
25
27
28
26
28
27
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE DRIVER
BLADE DRIVER
For 42 and 50” Mowers
For 36” Mowers
1
2
1
2
3
20
21
4
5
20
5
6
6
10
11
7
9
10
11
5
12
4
5
12
17
4
12
14
12
8
14
8
18
13
18
15
15
13
16
19
Item #
Description
3/4-16 2 Way Lock Nut
1.5x.761x.098x.134 Belleville Washer
Blade Pulley- 5.5" (42" Mower Only)
Washer For Blade Driver
Blade Bearing
Part # Item #
Description
1/4-20 X 3/4 GR5 ZP
1/4-20 Nylok Nut
3/8-24 Two Way Locknut
3/8-24 X 1 Bolt
Part #
NB250
NB180
NB216
NB238
9008
NB607
NB238N
9024
1
2
3
4
5
6
7
8
NB175
AS155
10
11
12
13
14
15
16
17
18
19
20
21
6114TK
NB179
B98
Blade Mount Plate
SP Washer Bellvl. PLN .413 X .945 X .118
3/8-24 X 1 Engine Bolt Locktite
Blade Mount Plate Spacer (36" Only)
3/8-24 X 1 1/2 HCC GR5 ZP (36" Only)
3/8-24 X 1 1/2 HCC GR5 ZP Locktite (36" Only) NB167N
Blade Shaft 4.25"
Bearing Housing
9076
B99ECTK
9014
36" Mower - 18" Blade
42" Mower - 20 1/2" Blade
42" Mower - 22" Blade
17.5" Blade for 50" Mower
Blade Driver Assy
9004
NB167
9005
5059
Blade Pulley 4.5" (36" & 50" Only)
3/4ID X 1 1/4OD 10 GA. Washer
B4104TK
NB184
9
9018
25
Download from Www.Somanuals.com. All Manuals Search And Download.
36” MOWING DECK
1
3
2
5
6
7
9
10
4
21
11
6
8
8
SEE DETAIL
Page 16
SEE DETAIL
THIS PAGE
6
11
8
12
Item #
Description
Grass Chute Weldment
Grass Chute Mount
Part #
3757TK
6030
NB136
9100
3750TC
NB596
3743
NB170
3665
15
13
1
2
3
4
5
6
7
8
9
14
5/16-18 X 8 1/2 HCC GR2 ZP
Torsion Spring - Bent Leg
Deck Weldment
5/16-18 X 3/4 Serr Flg Bolt
Pulley Cover
NOT SHOWN
Roller Bracket (12) Mounting Hardware
DESCRIPTION
5/16-18 X 3/4 Serr Flg Bolt NB596
5/16-18 Serrated Flange Nut NB170
PART # QTY
2
2
5/16-18 Serrated Flange Nut
Sway Bar Left
DECK IDLER
Sway Bar Right
3664
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
1/8 X 1 Cotter Pin
Lift Bracket
Front Roller Bracket
3/8-16 X 5 1/2 GR5 ZP
Anti-Scalp Roller
NB126
3738TK
4018TK
NB575
AS001
NB182
NB221
NB272
B527
6037
6040
NB181
NB501
682S
16
25
17
17
26
3/8-16 Nyloc Nut
3/8-16 X 2 1/2 HCC GR5 ZP
3/8 SAE Washer
18
24
Idler Pulley
Idler Bushing
Idler Spacer
19
20
27
17
5/16-18 Nyloc Nut
5/16-18 X 1 HCC GR5 ZP
Clutch Rod Spring
Idler Pulley
3/8-16 X 2 HCC GR5 ZP
Idler Weldment
23
21
7509
8
NB198
3848TK
NB280
22
3/8-16 2-Way Lock Nut
26
Download from Www.Somanuals.com. All Manuals Search And Download.
1
42” MOWING DECK
6
3
2
7
9
8
10
5
4
12
11
15
14
Item #
Description
Part #
3757TK
6030TK
NB136
9100
3762TK
NB596
3743
13
1
2
3
4
5
6
7
8
9
Grass Chute Weldment
Grass Chute Mount
5/16-18 X 8 1/2 HCC GR2 ZP
Torsion Spring - Bent Leg
Deck Weldement
5/16-18 X 3/4 Serr Flg Bolt
Pulley Cover
5/16-18 Serrated Flange Nut
Sway Bar Left
NOT SHOWN
Roller Bracket (12) Mounting Hardware
DESCRIPTION PART # QTY
5/16-18 X 3/4 Serr Flg Bolt NB596
5/16-18 Serrated Flange Nut NB170
2
2
NB170
3665
3664
DECK IDLER
16
Sway Bar Right
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1/8 X 1 Cotter Pin
Lift Bracket
Front Roller Bracket
3/8-16 X 5 1/2 GR5 ZP
Anti-Scalp Roller
NB126
3738TK
4018TK
NB575
AS001
NB182
NB221
NB272
B527
27
17
18
17
26
3/8-16 Nyloc Nut
3/8-16 X 2 1/2 HCC GR5 ZP
3/8 SAE Washer
19
Idler Pulley
Idler Bushing
Idler Spacer
Seat Hinge
6037
6040
3808TK
NB181
NB315
TZ2S
NB280
7509
NB198
3850TK
NB173
NB607
20
25
30
5/16-18 Nyloc Nut
5/16-18 Eye Bolt
Two Speed Spring
3/8-16 2-Way Lock Nut
Idler Pulley
28
6
24
21
22
3/8-16 X 2 HCC GR5 ZP
Idler Weldment
5/16-18 Jam Nut
Washer Bellvl. 413 X .945 X .118
23
29
8
27
Download from Www.Somanuals.com. All Manuals Search And Download.
50” MOWING DECK
14
6
1
3
2
7
4
8
2
9
10
11
SEE DETAIL
20
18
17
THIS PAGE
19
7
SEE DETAIL
Page 16
16
12
15
14
13
4
Item #
Description
Grass Chute Weldment
5/16-18 X 3/4 Serr Flg Bolt
Grass Chute Mount
5/16-18 Nyloc Nut
3/8-16 Nylok Nut Jam
3/8 USS Washer
Belt Cover-Right
Part #
3773TK
NB596
6030TK
NB181
NB207
NB271
3769TK
3768TK
NB164
NB205
NB126
3738TK
NB101
AS001
NB280
NB575
3664
DECK IDLER
1
2
3
4
5
6
7
14
37
Belt Cover-Left
3/8-16 X 3 HTC GR5 ZP
3/8-16 Kep Nut
21
22
8
9
22
10
11
12
13
14
15
16
1/8 X 1 Cotter Pin
Lift Bracket
36
34
5/16-18 X 4 Carriage Bolt
Anti-Scalp Roller
3/8-16 2-Way Lock Nut
3/8-16 X 5 1/2 GR5 ZP
Sway Bar-Right
26
28
23
22
24
25
22
Sway Bar-Left
Deck Weldment
5/16-18 Serrated Flange Nut
5/16-18 X 8 1/2 HCC GR2 ZP
Torsion Spring
3665
24
33
31
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
3766TK
NB170
NB136
9100
NB212
NB272
3786
6037
6040
7509
NB173
NB250
TZ2S
NB180
NB198
NB315
3770TK
B527
NB604
NB182
3772TK
35
8
3/8-16 HNC GR2 ZP
3/8 SAE Washer
Idler Pulley
29
25
8
Idler Bushing
Idler Spacer
Idler Pulley
5/16-18 Jam Nut
1/4-20 X 3/4 GR5 ZP
Two Speed Spring
1/4-20 Nylok Nut
3/8-16 X 2 HCC GR5 ZP
5/16-18 Eye Bolt
Deck Idler Arm
32
30
27
4
Idler Pulley
3/8-16 X 1 GR5 ZP Bolt
3/8-16 Nyloc Nut
Pulley Brace
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
SYMPTOM
CAUSE
CORRECTION
1.
2.
3.
4.
5.
WEAK OR DEAD BATTERY
AIR FILTER DIRTY
1.
REPLACE OR RECHARGE
ENGINE HARD
TO START
2.
3.
4.
5.
CLEAN OR REPLACE
REPLACE SPARK PLUG
REPLACE FUEL FILTER
BAD SPARK PLUG
FUEL FILTER DIRTY
STALE OR CONTAMINATED FUEL
DRAIN AND REPLACE WITH
FRESH FUEL
6.
CONTACT NEAREST
6.
CARBURATOR OUT OF ADJUSTMENT
BRIGGS&STRATTON SERVICE
REPRESENTATIVE
1.
STEERING LEVERS NOT IN NEUTRAL
LOCKED POSITION
1.
MOVE LEVERS INTO POSITION
ENGINE WILL
NOT START
OR LOSS OF
POWER
2.
3.
PTO SWITCH IS ENGAGED
2.
3.
PUSH PTO SWITCH IN
THROTTLE NOT SET PROPERLY OR
NOT PROPERLY “CHOKED”
SEE START UP IN OPERATION
SECTION
4.
ENGINE FLOODED
4.
WAIT SEVERAL MINUTES
BEFORE STARTING
5.
6.
7.
DIRTY FUEL FILTER
DIRTY AIR FILTER
5.
6.
7.
REPLACE WITH NEW FILTER
REPLACE OR CLEAN
CONTAMINATED FUEL
DRAIN AND REPLACE WITH
FRESH FUEL
8.
9.
REPLACE FUSE
8.
9.
BLOWN FUSE
REPLACE PLUG AND TIGHTEN
PLUG WIRE
BAD SPARK PLUG OR LOOSE PLUG
WIRE
10.
11.
12.
CLEAN ENGINE AIR SCREENS
REPLACE OR RECHARGE
10.
11.
12.
DIRTY ENGINE AIR SCREENS
WEAK OR DEAD BATTERY
CONTACT NEAREST
BRIGGS&STRATTON SERVICE
REPRESENTATIVE
CARBURATOR OUT OF ADJUSTMENT
13.
14.
15.
OUT OF FUEL
13.
14.
15.
REPLACE WITH FRESH FUEL
CLEAN TERMINALS
CORRODED BATTERY TERMINALS
LOOSE OR DAMAGED WIRING
CONTACT SWISHER SERVICE
REPRESENTATIVE
16.
17.
ADD OIL / RECHECK LEVEL
CHANGE OIL
16.
17.
LOW OR DIRTY OIL
CLEAN UNDERSIDE OF MOWER
DEBRIS BUILT-UP UNDER DECK
1.
2.
IMPROPER AIR PRESSURE
1.
2.
CHECK AND ADJUST TIRE
PRESSURE
UNIT DOES
NOT TRACK
STRAIGHT
SEE TRACKING ADJUSTMENT IN
SERVICE SECTION
TRACKING ADJUSTMENTS OUT OF
ADJUSTMENT
29
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY RIGHTS AND OBLIGATIONS
YOUR WARRANTY RIGHTS AND OBLIGATIONS: The California Air Resources Board and Swisher Mower, is pleased to explain
the evaporative emission control system (EECS) on your model year 2006 and later Swisher Product. In California, new Outdoor
Power Equipment, must be designed, built and equipped to meet the State’s stringent anti-smog standards. Swisher Mower must
warrant the EECS on your Power Equipment, for the period of time listed below provided there has been no abuse, neglect, or
improper maintenance. For model year 2006 the EECS on your mower includes the liquid fuel lines, fuel line connectors, and fuel
line clamps. Where a warrantable condition exists, Swisher Mower will repair at no cost to you. Expenses covered under warranty
include diagnosis, parts, and labor.
MANUFACTURER’S WARRANTY COVERAGE: For a period of two years, any evaporative emission-related part included in the
list of EECS parts for your mower is defective, the part will be repaired or replaced by Swisher Mower.
OWNER’S WARRANTY RESPONSIBILITIES: As the owner of this Power Equipment, you are responsible for performance of the
required maintenance listed in your owner’s manual. Swisher Mower recommends that you retain all receipts covering maintenance
on your Power Equipment, but Swisher Mower cannot deny warranty solely for the lack of receipts. As the Power Equipment owner,
you should be aware that Swisher Mower, may deny you warranty coverage if your Power Equipment, or a covered part has failed
due to abuse, neglect, or improper maintenance, unapproved modifications, or the use of parts not made or approved by the
equipment manufacturer. You are responsible for presenting your Power Equipment to an authorized Swisher Service center as
soon as the problem exists. Warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you
have a question regarding your warranty rights and responsibilities, you should contact the Swisher Mower Service representative at
1-800-222-8183.
WARRANTY COMMENCEMENT DATE: The warranty period begins on the date the Power Equipment Is purchased.
LENGTH OF COVERAGE: This warranty shall be for a period of two (2) years from the initial date of purchase.
WHAT IS COVERED: Warranted parts include the Liquid fuel line, fuel line connectors, and fuel line clamps.
REPAIR OR REPLACEMENT OF PARTS: Repair or replacement of any evaporative warranted part will be performed at no charge
to the owner at an authorized Swisher Mower Service Center. If you have a question regarding your warranty rights and
responsibilities, you should contact your nearest authorized service center or call the Swisher Mower Service representative at 1-
800-222-8183.
WARRANTY PERIOD: Any warranted part is not scheduled for replacement as required maintenance, or which is scheduled only
for regular inspection to the effect of “repair or replace as necessary” shall be warranted for two (2) years. Any warranted part that
is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled
replacement point for that part.
DIAGNOSIS: The owner shall not be charged for diagnostic labor that leads to the determination that a warranted part is defective if
the diagnostic work is performed at an authorized Swisher Service Center.
CONSEQUENTIAL DAMAGE: Swisher Mower, may be liable for damages to other engine or equipment components caused by the
failure of a warranted part still under warranty.
WHAT IS NOT COVERED: All failures caused by abuse, neglect, or improper maintenance is not covered.
ADD-ON OR MODIFIED PARTS: The use of add-on or modified parts may be grounds for disallowing a warranty claim. Swisher
Mower is not liable to cover failures of warranted parts caused by the use of an add-on or modified part.
HOW TO FILE A CLAIM: If you have a question regarding your warranty rights and responsibilities, you should contact your nearest
authorized service center or call Swisher Mower Service representative at 1-800-222-8183.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
swisherinc.com
“Z” SERIES
ZERO TURN HYDROSTATIC DRIVE
Each mower has its own model number. Each engine has its
own model number. The model number for the mower will be
found under the seat. The model number for the engine will be
found on the top of the blower fan housing.
All mower parts listed herein may be ordered directly from
Swisher Mower & Machine Co. Inc. or your nearest Swisher
dealer.
OWNER’S
MANUAL
All engine parts may be ordered from the nearest dealer of the
engine supplied with your mower.
WHEN ORDERING PARTS, PLEASE HAVE THE
FOLLOWING INFORMATION AVAILABLE:
MODEL NO.
ZT1436B
ZT18542
* PRODUCT – Zero Turn Rider (“Z” Series)
* SERIAL NUMBER - _______________
* MODEL NUMBER - _______________
* ENGINE MODEL NUMBER - _______________
TYPE - _______________
* PART NUMBER WITH PAINT CODE
* PART DESCRIPTION
ZT2250
TELEPHONE - 1-800-222-8183
FAX - 1-660-747-8650
SWISHER MOWER & MACHINE CO. INC.
1602 CORPORATE DRIVE
P.O. BOX 67
WARRENSBURG, MO 64093
SWISHER MOWER & MACHINE CO. INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Snapper Portable Generator 30214 User Manual
Sony Binoculars TDG BR100 User Manual
Sony Microcassette Recorder SY ICD MX20DR9 User Manual
Sony MiniDisc Player MDX C6500R User Manual
Sony Switch PCGA DSD5 User Manual
Spirit Treadmill Z100 User Manual
Sun Microsystems Computer Accessories 819468310 User Manual
Sun Microsystems Server 816 7727 10 User Manual
Swann DVR SW243 4NU User Manual
Sylvania CRT Television W6413TC User Manual