2002 SONY MOBILE
PRODUCT GUIDE
• 1200W Max Power
• 300W x 1 into 4W, 5-300Hz, @ 0.2%THD
• 600W x 1 into 2W, 5-300Hz, @ 0.6%THD
• 1000W x 1 into 1W, 5-300Hz, @ 1.2%THD
• Class D Mono Subwoofer Amplifier
• MOSFET Outputs
• MOSFET Power Supply
• High Current 1W Stability
• Variable 50-300Hz Low Pass Filter
• 40 HZ EQ Boost, RCA Output
• RCA and Speaker Level Inputs
XM-1600GSD
Mono Class D Amplifier
• Indicates step-up
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
300 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.
Other Specifications
Circuit system
Inputs
OTL (output transformerless) circuit
Pulse power supply
RCA pin jacks
High level input connector
Speaker terminals
Through out pin jacks
1 – 8W
Outputs
Speaker impedance
Maximum outputs
600 W (at 4W)
1200 W (at 2W)
Rated outputs (supply voltage at 14.4 V)
300 W (20 Hz – 300 Hz, 0.2% THD, at 4W)
600 W (20 Hz – 300 Hz, 0.6% THD, at 2W)
1000 W (20 Hz – 300 Hz, 1.2% THD, at 1W)
5 Hz – 300 Hz ( +0.5 dB, -3 dB)
Frequency response
Harmonic distortion
0.06% or less (at 100 Hz, 4W)
Input level adjustment range
0.2 – 6.0 V (RCA pin jacks)
0.4 – 12.0 V (High level input)
50 – 300 Hz, –18 dB/oct
0 – 10 dB (40 Hz)
Low-pass filter
Low boost
Power supply voltage
Current drain
10.5 – 16 V
at rated output : 40 A (4W)
Remote input : 2 mA
Dimensions
Approx. 358 × 50 × 264 mm (w/h/d)
14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Mounting screws (4)
Mass
Supplied accessories
Design and Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|