IN S T R U C T IO N M A N U A L
®
SONANCE SYMPHONY TR/TSQ
IN - C E IL IN G S P E A K E R S
Home Theater Speaker Placement
INTRODUCTION
®
Left, Center & Right Speakers (see Figure 3)
Thank you for purchasing Sonance Symphony TR/TSQ-series in-ceiling speakers.
When properly installed your new speakers will give you years of entertainment
pleasure. This manual covers these speaker models: Symphony S625TR, Symphony
S624TR, Symphony S623TR, Symphony S622TR, Symphony S621TR and Symphony S623TSQ.
• Place the left, center and right speakers from 1 foot to 2 feet in front of the
video screen, anywhere from 6 feet to 10 feet apart, with the center channel
speaker as close to midway between the left and right speakers as possible.
• The main listening position should be between 4 and 10 feet away from the
SAFETY WARNING:
speakers.
These speakers have FastMount® tabs that prevent the speaker from falling out
of the mounting hole during the installation process.
Surround Speakers (5.1-Channel System — see Figure 3)
• Locate the left and right surround speakers on the ceiling between 2 feet and
6 feet behind the listening position. The speakers should be between 6 feet and
10 feet apart.
Left, Center
& Right
Left & Right
Surround
Speakers
BOX CONTENTS
Speakers
Your Sonance Symphony speaker box should contain the following items:
(2) Symphony speakers, (2) Plastic paint plugs (installed on fronts of speakers);
(2) Paintable grilles; (1) Mounting cutout template (in packaging)
6'– 10'
Apart
6' – 10'
Apart
TV
SPEAKER PLACEMENT
Distributed Audio Placement (Mono signal)
1'– 2'
2' – 6'
All Sonance Symphony TR- and TSQ-series speaker models have very smooth and
predictable off-axis response, so they provide excellent coverage in distributed
audio systems from a wide variety of installation locations. The chart in Figure 1
shows how far apart the speakers can be placed at different ceiling heights while
still providing good coverage (as shown in Figure 2). The distances are based on
Less than 2’
F igure 3: 5. 1 - Channel H om e Theater S peaker P lac em ent
ear heights of 62” for standing listeners and 40” for seated listeners.
Surround Speakers (7.1-Channel System — see Figure 4)
Speaker Spacing (in feet) for a Distributed Audio System
Standing Listener Seated Listener
• Left & Right Surround Speakers: Place the left and right surround
speakers directly to the sides of the listening position, between 6 feet and 10
feet apart.
8-foot ceiling
10-foot ceiling
12-foot ceiling
14-foot ceiling
5.7'
9.7'
9.5'
• Surround Back Speakers: Place the surround back speakers between 2
feet and 6 feet behind the listening position. The surround back speakers should
be closer together than the left and right surround speakers — between 3 feet
and 6 feet apart.
13.5'
17.5'
21.5'
13.7'
17.7'
Left, Center
& Right
Left & Right
Surround Speakers
F i g u r e 1 : D i s t r i b u t e d A u d i o S p e a k e r S p a c i n g
Speakers
Surround
Back
Speakers
S
SPPAEACIKNEGR
6' – 10'
3' – 6'
Apart
TV
Apart
2' – 6'
COVERAGE
AREA
COVERAGE
AREA
1'– 2'
Less than 2’
F igure 4 : 7 . 1 - Channel H om e Theater S peaker P lac em ent
F i g u r e 2 : D i s t r i b u t e d A u d i o C o v e ra g e A r e a
1
Download from Www.Somanuals.com. All Manuals Search And Download.
®
SONANCE SYMPHONY TR & TSQ
• If you’re using the speakers in stereo or as the front left/center/right speakers
in a home theater, pivot the woofer and/or tweeter directly towards the listen-
ing area. This will help the sound from the speakers blend into a solid sound-
stage even if the speakers are widely separated.
S624TR
Tweeter:
1" (25mm) Aluminum dome, Ferrofluid-cooled, pivoting
6½" (165mm) Coated carbon fiber cone, rubber surround, pivoting
43Hz – 20kHz ± 3dB
6 Ohms nominal; 4 Ohms minimum
5 watts minimum; 140 Watts maximum
90dB SPL (2.83V 1 meter)
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
• If you’re using the speakers as surround channel speakers in a home theater,
you can create a more diffuse, spacious surround effect by aiming the woofers
and/or tweeters towards a wall or window, away from the listeners.
To Pivot the
Woofer:
Apply pressure on the
outer edge of the
tweeter support bracket,
as shown in Figure 8.
Do not touch or apply
pressure to the woofer
cone.
Adjustments:
± 3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" (248mm) x 53/16" (132mm)
Cutout Diameter:
Shipping Weight:
85/32" (207mm)
11 lbs. (5.0kg) Pair
S623TR
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
1" (25mm) Silk dome, Ferrofluid-cooled, pivoting
6½" (165mm) Carbon fiber cone, rubber surround, pivoting
43Hz – 20kHz ± 3dB
8 Ohms nominal; 6 Ohms minimum
5 watts minimum; 135 Watts maximum
90dB SPL (2.83V 1 meter)
To Pivot the
Tweeter:
Apply light pressure to
Pivoting theWoofer Pivoting theTweeter
F i g u r e 8 :
P i v o t i n g t h e Wo o f e r a n d Tw e e t e r
the plastic ring around
the outside edge of
the tweeter dome, as
Adjustments:
± 3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" (248mm) x 53/16" (132mm)
Cutout Diameter:
Shipping Weight:
85/32" (207mm)
10 lbs. (4.5kg) Pair
shown in Figure 8. Do not touch or apply pressure to the tweeter dome.
Tweeter Level Control
S622TR
The S625TR, S624TR, S623TR and
S623TSQ have a tweeter level control
switch (see Figure 9) that lets you
boost or cut the tweeter’s level by
3dB. This allows you to adjust the
speaker’s brightness to better match
your listening room or personal taste.
Tweeter:
1" (25mm) Silk dome, Ferrofluid-cooled, pivoting
6½" (165mm) Polypropylene cone, rubber surround, pivoting
45Hz – 20kHz ± 3dB
8 Ohms nominal; 6 Ohms minimum
5 watts minimum; 125 Watts maximum
89dB SPL (2.83V 1 meter)
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Dimensions (Dia. x Depth): 9¾" (248mm) x 53/16" (132mm)
Cutout Diameter:
Shipping Weight:
Tweeter
Level Control
Once you have installed the speakers,
listen to a variety of music that you
are familiar with. If the music all
tends to sound too bright or dull, use
the Tweeter Level Control to compen-
sate. If some recordings sound dull and some sound bright the speaker is accu-
rately reproducing differences in the recordings, and you should leave the control
in the middle (0dB) position.
85/32" (207mm)
10 lbs. (4.5kg) Pair
F i g u r e 9 :
Tw e e t e r L e v e l C o n t r o l
S621TR
Tweeter:
Woofer:
Frequency Response:
Impedance:
¾" (19mm) Silk dome, Ferrofluid-cooled
6½" (165mm) Polypropylene cone, rubber surround, pivoting
50Hz – 20kHz ± 3dB
8 Ohms nominal; 6 Ohms minimum
5 watts minimum; 100 Watts maximum
88dB SPL (2.83V 1 meter)
SPECIFICATIONS
Power Handling:
S625TR
Sensitivity:
Dimensions (Dia. x Depth): 9¾" (248mm) x 53/16" (132mm)
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
1" (25mm) Beryllium dome, Ferrofluid-cooled, pivoting
6½" (165mm) Beryllium cone, rubber surround, pivoting
40Hz – 20kHz ± 3dB
6 Ohms nominal; 4 Ohms minimum
5 watts minimum; 150 Watts maximum
90dB SPL (2.83V 1 meter)
Cutout Diameter:
Shipping Weight:
85/32" (207mm)
9 lbs. (4.1kg) Pair
S623TSQ
Tweeter:
1" (25mm) Silk dome, Ferrofluid-cooled, pivoting
6½" (165mm) Carbon fiber cone, rubber surround, pivoting
43Hz – 20kHz ± 3dB
8 Ohms nominal; 6 Ohms minimum
5 watts minimum; 135 Watts maximum
90dB SPL (2.83V 1 meter)
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Adjustments:
± 3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" (248mm) x 53/16" (132mm)
Cutout Diameter:
Shipping Weight:
85/32" (207mm)
12 lbs. (5.45kg) Pair
Adjustments:
± 3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" x 9¾” x 413/16" (248mm x 248mm x 122mm)
Cutout Diameter:
Shipping Weight:
85/32" x 85/32" (207mm x 207mm)
10 lbs. (4.5kg) Pair
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Freight collect shipments will be refused. It is preferable to ship this product in
TECHNICAL ASSISTANCE AND SERVICE
the original shipping container to lessen the chance of transit damage. In any case,
If you any have questions about the operation or installa-
tion of this product, please call our Technical Assistance
Department on any business day at (800) 582-0772 or (949)
492-7777; from 7 a.m. to 5 p.m., PST.
the risk or loss or damage in transit is to be borne by the purchaser. If upon
examination at the factory or Authorized Sonance Dealer it is determined that the
unit was defective in materials or workmanship at any time during this warranty
period, Sonance or the Authorized Sonance Dealer will, at its option, repair or
replace this product at no additional charge, except as set forth below. If this
model is no longer available and can not be repaired effectively, Sonance, at is
sole option, may replace the unit with a current model of equal or grater value.
In some cases where a new model is substituted, a modification to the mounting
surface may be required. If mounting surface modification is required, Sonance
assumes no responsibility or liability for such modification. All replaced parts and
product become the property of Sonance. Products replaced or repaired under this
warranty will be returned to the original retail purchaser, within a reasonable time,
freight prepaid.
If your speakers should need repair or service, contact your Sonance Authorized
Dealer for help, or use the following procedure:
1. Prior to calling, note the product’s model number, serial number, purchase date,
and the name and address of the dealer where you purchased the product.
2. Contact our Technical Assistance Department at the above number(s) and
describe the problem the unit is experiencing. If applicable, they will issue a
Return Authorization Number.
IMPORTANT: YOU MUST HAVE PRIOR AUTHORIZATION
TO RETURN YOUR SPEAKER TO SONANCE!
This Warranty does not include service or parts to repair damage caused by acci-
dent, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures,
commercial use, voltage inputs in excess of the rated maximum of the unit, or
service, repair or modification of the product which has not been authorized or
approved by Sonance. This Warranty also excludes normal cosmetic deterioration
caused by environmental conditions. This Warranty will be void if the Serial Number
on the product has been removed, tampered-with or defaced. This Warranty is in
lieu of all other expressed warranties. If the product is defective in materials or
workmanship as warranted above, the purchaser’s sole remedy shall be repair or
replacement as provided above. In no event will Sonance be liable for any inci-
dental or consequential damages arising out of the use or inability to use the
product, even if Sonance or an Authorized Sonance Dealer has been advised of the
possibility of such damages, or for any claim by any other party.
3. If you’re directed to return the unit to Sonance for repair, pack the unit in its
original shipping carton. If needed, you can obtain replacement packaging from
us for a small charge. Note: it is best if you place the box into an additional
outer “overcarton” before shipment to minimize a chance of theft in shipment.
Please include a copy of the original bill of sale inside the package.
4. Contact a package delivery company such as United Parcel Service or Federal
Express to arrange prepaid (not collect) shipping. Do not use the U.S. Postal
Service.
IMPORTANT: Freight collect shipments will be refused.
5. Write the Return Authorization Number on the outside of the
shipping carton.
6. Ship the packaged unit to:
Some states do not allow the exclusion or limitation of consequential damages, so
the above limitation and exclusion may not apply. All implied warranties on the
product are limited to the duration of this expressed Warranty. Some states do not
allow limitation on the length of an implied warranty. If the original retail pur-
chaser resides in such a state, this limitation does not apply.
Q
UALITY ASSURANCE
D
EPARTMENT
S
ONANCE
212 AVENIDA
F
ABRICANTE
SAN
CLEMENTE, CA 92672-7531
EXCLUSIONS AND LIMITATIONS
LIMITED LIFETIMEWARRANTY COVERAGE
The warranty set forth above is in lieu of all other warranties, express or implied,
(U.S. ONLY)
of merchantability, fitness for a particular purpose, or otherwise. The warranty is
limited to Sonance products registered herein and specifically excludes any dam-
age to loudspeakers and other allied or associated equipment which may result for
any reason from use with this product. Sonance shall, in no event, be liable for
incidental or consequential damages arising from any breach of this warranty or
otherwise. This warranty gives you specific legal rights, and you may have other
rights which vary from state to state.
S
ONANCE WARRANTS TO THE ORIGINAL RETAIL PURCHASER ONLY THAT
THIS ONANCE PRODUCT WILL BE FREE FROM DEFECTS IN MATERIALS
AND WORKMANSHIP PROVIDED THE SPEAKER WAS PURCHASED FROM A
ONANCE UTHORIZED EALER
S
,
S
A
D
.
Defective products must be shipped, together with proof of purchase, prepaid
insured to the Authorized Sonance Dealer from whom they were purchased, or to
the Sonance factory at the address listed on this instruction manual.
©2007 Sonance. All rights reserved. Sonance, Sonance Symphony, RotoLock and FastMount are registered trademarks of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product specification information visit
our website: www.sonance.com
212 Avenida Fabricante • San Clemente, CA 92672-7531 USA • (800) 582-7777 or (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (800) 582-0772
33-4339
06/07
Download from Www.Somanuals.com. All Manuals Search And Download.
|