XL-MP10H (A) TINSEA036SJZZ
1
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
XL-MP10H Micro Component System consisting of XL-MP10H (main unit)
and CP-S10H (speaker system).
MICRO COMPONENT SYSTEM
MODEL
XL-MP10H
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
Remote control
1
"AA" size battery
(UM/SUM-3, R6, HP-7
FM/AM loop aerial
1
or similar)
2
Note:
Only the above accessories are included.
04/10/27
XL-MP10H(A)_FRONT.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
XL-MP10H
1
" General
! Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
! Please ensure that the equipment is positioned in a well venti-
lated area and that there is at least 10 cm of free space along the
sides and back. There must also be a minimum of 20 cm of free
space on the top of the unit.
! Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.
10 cm 10 cm
20 cm
! The ventilation should not be impeded by
covering the ventilation openings with
items, such as newspapers, tablecloths,
curtains, etc.
10 cm
! Use the unit on a firm, level surface free from
vibration.
! No naked flame sources, such as lighted candles, should be
placed on the apparatus.
! Attention should be drawn to the environmental aspects of bat-
tery disposal.
! This unit should only be used within the range of 5°C - 35°C.
! Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust, hu-
midity and electronic/electrical equipment
(home computers, facsimiles, etc.) which
generate electrical noise.
! Do not place anything on top of the unit.
! Do not expose the unit to moisture, to temperatures higher than
60°C or to extremely low temperatures.
Warnings:
! The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible
for any damage resulting from use of this unit with a voltage other
than that which is specified.
! CD players use a laser pickup which can damage the eyes if
viewed directly. Do not look at the pickup, and do not touch
the pickup directly.
! If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
! In case of an electrical storm, unplug the
unit for safety.
" Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
3
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
XL-MP10H
Reference page
1. Disc Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. Bass/Treble Selector Button . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. Function Selector Button . . . . . . . . . . . . . . . . . . . . 11, 16, 18
5. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 17
6. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 17
7. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8. Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
9. Disc Eject Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11. Disc Track Up or Fast Forward,
1
9
10
2
11
12
13
14
3
4
5
6
7
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . 13, 17
12. Disc Play or Pause, Tuning Up Button . . . . . . . . . . . . . 11, 16
13. Disc Stop, Tuning Down Button . . . . . . . . . . . . . . . . . . 11, 16
14. Disc Track Down or Fast Reverse,
8
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . 13, 17
15. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
16. Tape Record Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
17. Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
18. Tape Rewind Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
19. Tape Fast Forward Button . . . . . . . . . . . . . . . . . . . . . . . . . . 18
20. Tape Stop/Eject Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
21. Tape Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
15 16 17 18 19 20 21
22 23 24
25 26 27
28
29
30
31
32
22. Tape Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
23. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
24. Disc Random Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . 14
25. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 17
26. MP3 Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
27. WMA Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
28. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
29. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
30. Disc Repeat Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
31. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 16
32. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 16
33
34
35
33. FM/AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 6
34. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
35. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7
4
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H
1
1. Full-Range Speaker
2. Speaker Wire
Note:
The speaker grilles are not removable.
1
Reference page
3. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8. Disc Fast Reverse, Tuning Down Button . . . . . . . . . . . 13, 16
9. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10. Disc Track Down, Tuner Preset Down,
2
3
Time Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 13, 17
11. Disc Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12. Treble Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . 8
13. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 15, 17
14. Disc Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
15. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 17
16. Tuner and Band Selector Button . . . . . . . . . . . . . . . . . . . . 16
17. MP3/WMA Display Button . . . . . . . . . . . . . . . . . . . . . . . 12, 13
18. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
20. Disc Fast Forward, Tuning Up Button . . . . . . . . . . . . . 13, 16
21. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
22. Disc Track Up, Tuner Preset Up,
Time Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 13, 17
23. Volume Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
24. Bass Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 8
25. Disc Random Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . 14
26. Disc Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
27. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
17
18
4
5
6
7
19
20
21
8
9
10
11
12
22
23
24
13
14
15
25
26
27
16
5
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
XL-MP10H
" Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Make sure to unplug the AC power lead
before making any connections.
AM loop aerial
Notes:
FM aerial
! Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
! Do not connect the attached FM aerial to an external aerial as
this may cause trouble.
Right speaker
Left speaker
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
" Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Caution:
! Do not let the bare speaker wires touch each
other.
! Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
! Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
Wall socket
(AC 230 - 240 V, 50 Hz)
Incorrect
White line
Plain
Placing the speaker system:
There is no distinction between the right and the left speakers.
6
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H (A) TINSEA036SJZZ
2
XL-MP10H
" AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
" To turn the power on
Press the ON/STAND-BY button to turn the power on.
2
After use:
Note:
Press the ON/STAND-BY button to enter the power stand-by
mode.
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Remote control
Notes concerning use:
" Battery installation
! Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
! Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
! Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
! Keep the remote control away from moisture, heat, shock, and
vibrations.
1
Remove the battery cover.
2
Insert the supplied batteries according to the direction indi-
cated in the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
3
Replace the cover.
" Test of the remote control
Check the remote control after
Remote sensor
checking all the connections (see
pages 6 - 7).
Point the remote control directly at
the remote sensor on the unit.
Precautions for battery use:
! Replace all old batteries with new ones at the same time.
! Do not mix old and new batteries.
The remote control can be used
within the range shown:
Press the ON/STAND-BY button.
Does the power turn on? Now, you
can enjoy music.
!
Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
0.2 m - 6 m
Caution:
! Do not use rechargeable batteries (nickel-cadmium battery, etc.).
!
Installing the batteries incorrectly may cause the unit to malfunction.
Battery removal:
Remove the battery cover. Push each battery toward the battery
terminal and take them out.
7
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound control
XL-MP10H
" Adjusting the volume
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (- or +) button to increase or decrease the vol-
ume.
.....
28 29 30
0
1
2
" Adjusting the bass
Main unit operation:
1
2
Press the BASS/TREBLE button to select "BASS".
Within 5 seconds, turn the VOLUME control to adjust the bass.
Remote control operation:
Press the BASS (- or +) button to adjust the bass.
...
...
-3
0
4
" Adjusting the treble
Main unit operation:
1
2
Press the BASS/TREBLE button to select "TRE".
Within 5 seconds, turn the VOLUME control to adjust the treble.
Remote control operation:
Press the TREBLE (- or +) button to adjust the treble.
...
...
-3
0
4
8
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
XL-MP10H
3 Within 1 minute, press the PRESET ( or ) button to ad-
just the hour and then press the MEMORY button.
3
Press the PRESET ( or ) button once to advance the time
by 1 hour. Hold it down to advance continuously.
4 Within 1 minute, press the PRESET ( or ) button to ad-
just the minutes and then press the MEMORY button.
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
Press the PRESET ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.
1 Press the CLOCK button and within 5 seconds, press the
To confirm the time display:
Press the CLOCK button.
MEMORY button.
The time display will appear for about 5 seconds.
Note:
The "0:00" or time will flash when the AC power supply is restored
after a power failure or unplugging the unit.
Readjust the clock as follows.
2 Within 1 minute, press the PRESET ( or ) button to se-
lect 24-hour or 12-hour display and then press the MEMO-
RY button.
To readjust the clock:
Perform "Setting the clock" from the beginning. If the "0:00" is not
flashing in step 1, step 2 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 24 for details.]
Perform "Setting the clock" from the beginning.
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
2
9
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a disc
XL-MP10H
This system can play back a standard CD, CD-R/RW in the CD for-
mat and CD-R/RW with MP3 or WMA files, but cannot record on
them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the equipment used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant com-
pression from the original audio source with very little loss in sound
quality.
! The MP3 track indicator will light up when an MP3 track is read.
! This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
! During VBR file playback, time counter in the display may differ
from its actual playback time.
WMA:
WMA files are ASF (Advanced Systems Format) audio files which
are compressed with Windows Media Audio codec. WMA is devel-
oped by Microsoft as an audio format file for Windows Media Player.
! The WMA track indicator will light up when a WMA track is read.
! Supported bit rates for WMA files range from 64 kbps to 160
kbps.
10
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H
1 Press the ON/STAND-BY button to turn the power on.
6 Press the
(
) button to start playback from track 1.
2 Press the FUNCTION button until "CD DISC" appears on
Disc play indicator
the display.
When operating with the remote control, press the CD button.
4
3 Press the CD EJECT button to open the disc compart-
ment.
When the last track on the disc has finished playing, the unit will
stop automatically.
4 Place the disc on the spindle, label
side up.
To interrupt playback:
Main unit operation:
Press the
button.
To resume playback from the same
point, press the button again.
Remote control operation:
Press the button.
5 Close the disc compartment by firmly pushing the corner
To resume playback from the same point, press the button.
marked "PUSH CLOSE".
To stop playback:
Press the button.
MP3 track indicator
[MP3]
To remove the disc:
Whilst in the stop mode, press the CD EJECT button.
Total number of tracks
WMA track indicator
Caution:
! Do not play discs with special shapes (heart or octagon shaped)
as it may cause malfunctions.
[CD]
[WMA]
! If a disc is damaged, dirty, or loaded upside down, "NO DISC"
will appear on the display.
! Keep foreign objects out of the disc compartment.
! Subjecting the unit to shock or vibration may cause mistracking.
! When the unit is not being used, be sure to close the disc com-
partment. If it is left open, the lens may be covered with dust and
the unit may not operate properly.
Total number Total playing Total number of tracks
of tracks time
! Due to the structure of its disc information, it takes longer
(approximately 20 to 90 seconds) to read a CD-R/RW disc
recorded in the MP3 or WMA format than a normal CD.
! If TV or radio interference occurs during disc operation, move the
unit away from it.
11
04/10/21
XL-MP10H(A)E1.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H
Listening to a disc (continued)
! Care of compact discs
! To change the display (CD-R/RW discs
recorded in the MP3 or WMA format only)
Whilst in the stop mode or playback mode, press the DISPLAY but-
ton.
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
Each time the button is pressed, the display will change as follows.
" Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
" Keep your discs away from direct sunlight, heat, and excessive
moisture.
[When in the stop mode]
" Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
Track name
Folder name
Total number
of tracks
NO
YES
Correct
1st track
" To check the total number of tracks, press the button.
[When in the playback mode]
! Headphones
" Before plugging in or unplugging the headphones, reduce the
volume.
Folder name
Artist name
Track name
Title name
Track
number
Elapsed
playback
time
" Be sure your headphones have a 3.5 mm diameter plug and
impedance between 16 and 50 ohms. The recommended imped-
ance is 32 ohms.
" Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
Album name
12
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced disc playback
XL-MP10H
! To locate the beginning of a track
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
4
Note:
You can skip to any track by pressing the
edly until the desired track number appears.
or
button repeat-
! To locate the desired portion
Sound will be heard for a CD, but not for CD-R/RW discs recorded
in the MP3 or WMA format. (Check the displayed playback time for
these discs.)
! To select the desired folder or track by name
(CD-R/RW discs recorded in the MP3 or WMA
format only)
For fast forward:
Press and hold down the
For fast reverse:
button during playback.
button during playback.
Press and hold down the
1 Whilst in the stop mode, press
the DISPLAY button on the re-
mote control to display the folder
name.
Notes:
" Normal playback will resume when the
released.
or
button is
" When the end of the last track is reached during fast forward,
"END" will appear on the display and disc operation will be
paused. When the beginning of the first track is reached during
fast reverse, the disc will start playback automatically.
2 Select the desired folder by pressing the
or
button.
button.
3 Press the DISPLAY button to dis-
play the track name.
" The
or
button on the main unit allows you to locate the
4 Select the desired track by pressing the
or
desired portion.
5 Press the
(
) button to begin
playback.
13
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H
Advanced disc playback (continued)
! Direct search of the track
By using the direct search buttons, the desired tracks can be
played.
! Repeat play
All tracks or
repeated.
a
programmed sequence can be continuously
To repeat all tracks:
1 Press the REPEAT button.
1 Whilst in the stop mode, use
the direct search buttons on
the remote control to select the
2 Press the
(
) button.
To repeat a desired track:
1 Perform steps 1 - 3 in the "Programmed play" section on page 15
and then press the REPEAT button.
desired track.
Selected track number
" The direct search buttons allow you to select up to number 9.
2 Press the
(
) button.
" When selecting number 10 or higher, use the "+10" button.
To repeat random play:
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
Press the REPEAT button during random play.
To cancel repeat play:
Press the REPEAT button again. " " will go out.
Caution:
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
! Random play
The tracks can be played in random order automatically.
2 Press the
(
) button to start playback.
Playback of the selected track is started. When the last track on
the disc has finished playing, the unit will stop automatically.
Whilst in the stop mode, press the
RANDOM button and the
(
) but-
ton sequentially to begin random
play.
To stop playback:
Press the button.
To cancel random play:
Whilst in the stop mode, press the RANDOM button again.
Notes:
" The selected track can be started simply by pressing the direct
search buttons during playback. [It is not necessary to press the
Notes:
" When you press the RANDOM button during playback, the main
unit switches to random play.
(
) button.]
" A track number higher than the number of tracks on the disc can-
not be selected.
" During random play, direct search is not possible.
" For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by press-
ing the direct search buttons.
" Random play will stop automatically when all tracks are played
once. (The same track will not be played back twice.)
" In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
" If you press the
button during random play, you can move to
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The
beginning of the track being played will be located.
14
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H
Notes:
! Programmed play
" Opening the disc compartment automatically cancels the pro-
grammed sequence.
" Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
" During the programme operation, random play is not possible.
" For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by press-
ing the direct search buttons.
You can choose up to 32 selections for playback in the order you
like.
1 Whilst in the stop mode, use the
direct search buttons to select the
desired track.
4
Selected track number
You can also select a track by pressing the
or
button.
2 Press the MEMORY (MEMORY/
SET) button to save the track
number.
Playback order
When the track is memorised, "MEMORY" will appear.
3 Repeat steps 1 - 2 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
4 Press the
(
) button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode
and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 2 to add tracks. The new
tracks will be stored after the last track of the original programme.
15
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
XL-MP10H
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button until "FM" or "AM" appears on
the display.
When operating with the remote control, press the TUNER
(BAND) button to select "FM" or "AM".
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
" When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the FUNCTION [TUNER (BAND)] button to display the "ST"
indicator.
" " " will appear when an FM broadcast is in stereo.
" If the FM reception is weak, press the FUNCTION [TUNER
(BAND)] button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
16
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the memorised station
XL-MP10H
! Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
! To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
To select a preset station with the direct number buttons:
Press the corresponding number ("0" - "+10").
1 Perform steps 1 - 3 in "Listening to the radio" on page 16.
2 Press the MEMORY/SET (MEMO-
RY) button to enter the preset tun-
ing saving mode.
Example:
To select 28, press "+10", "+10" and "8".
5
! To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
3 Within 5 seconds, press the PRE-
SET ( or ) button to select the
preset channel number.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
Press the PRESET ( or ) button again when the desired sta-
tion is located.
Store the stations in memory, in order, starting with preset
channel 1.
2
4 Within 5 seconds, press the MEM-
ORY/SET (MEMORY) button to
store that station in memory.
! To clear a memorised station
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
1
Recall the memorised station.
Whilst it is displayed, press the
MEMORY/SET (MEMORY) button.
Within 5 seconds, press the CLEAR
button on the remote control.
2
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
3
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
! To erase entire preset memory
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
Whilst pressing down the MEMORY/SET button and the PRE-
SET button, press the ON/STAND-BY button until "TUCL" ap-
pears.
17
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape
XL-MP10H
Before playback:
1 Press the ON/STAND-BY button to turn the power on.
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
" Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
2 Press the FUNCTION button until "TAPE" appears on the
display.
When operating with the remote control, press the TAPE but-
ton.
3 Press the
button to open the cassette compartment.
4 Load a cassette into the cas-
sette compartment with the
side to be played facing to-
ward you.
5 Close the cassette compartment.
6 Press the button to start playback.
To stop playback:
Press the
button.
Fast forward/rewind:
To advance the tape, press the
button, then press the
but-
ton. To rewind, press the
button, then press the button.
To interrupt playback:
Press the button during playback.
Press the button again to resume playback.
Caution:
" Do not press the button whilst the fast forward or rewind opera-
tions are in progress. The or button will not be released
when the tape end is reached. Once this occurs, press the
button.
" Before changing from one tape operation to another, press the
button.
18
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a cassette tape
XL-MP10H
Before recording:
Erase-prevention tab of cassette tapes:
" When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
" SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
" The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
" For recording, use only normal tapes. Do not use metal or
CrO tapes.
" When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent acciden-
tal recording or erasing.
Side A
Tab for
side B
Tab for
side A
" To protect the recorded sound, re-
move the tab after recording. Cover
the tab hole with adhesive tape to
record on the tape without the tab.
" Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
6
! Recording from a disc
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button until "CD DISC" appears on
the display.
When operating with the remote control, press the CD button.
3 Load the desired disc.
4 Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
5 Press the button.
6 Press the
button, which also
engages the button.
7 Press the button again to cancel the pause mode.
8 Press the
(
) button to start recording.
19
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H
Recording on a cassette tape (continued)
To perform programmed recording:
! Recording from the radio
1
2
3
4
5
Programme tracks (see page 15).
1 Tune in to the desired station (see page 16).
Press the button.
Press the button, which also engages the button.
Press the button again to cancel the pause mode.
2 Load a cassette into the cassette compartment with the
Press the
(
) button to start recording.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
To interrupt recording:
Press the button.
To resume recording, press the button.
3 Press the button.
4 Press the
button, which also
engages the button.
To stop recording:
Press the
button.
The tape will stop.
5 Press the button again to begin recording.
To stop recording:
Press the
button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
! Erasing recorded tapes
1
Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
Press the FUNCTION button until "TAPE" appears on the dis-
play.
2
When operating with the remote control, press the TAPE button.
Press the button, which also engages the button to begin
erasing.
3
20
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation
XL-MP10H
This may be operated only with the remote control.
! Timer playback
1 Press the ON/STAND-BY button to turn the power on.
Timer playback:
The unit turns on and plays the desired source (disc or tuner) at a
preset time.
2 Press the CD or TUNER (BAND) button to select the de-
sired function.
When you selected the TUNER (BAND), tune in to the desired
station.
Sleep operation:
The radio or disc can be turned off automatically.
3 Adjust the volume using the VOLUME buttons.
Note:
Do not turn the volume up too high.
The timer and sleep operations are not available during tape mode.
4 Press the TIMER button and within 6 seconds, press the
Before setting timer:
MEMORY button.
7
1
2
Check that the clock is set to the correct time (refer to page 9).
Load a disc to be played.
5 Within 1 minute, press the PRESET ( or ) button to
specify the hour to start, then press the MEMORY button.
6 Within 1 minute, press the PRESET ( or ) button to
specify the minutes to start, then press the MEMORY but-
ton.
" The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
" " " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
Continued to the next page
21
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-MP10H
Timer and sleep operation (continued)
To cancel the sleep operation:
7 When the preset time is reached, playback will start.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SLEEP button until "OFF" appears on the
display.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
8 The unit will enter the stand-by mode one hour after the
timer playback starts. However, when disc playback time is
one hour or less, it will enter the stand-by mode after com-
pleting playback.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
! To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
! Sleep operation
1 Play back the desired sound source.
2 Press the SLEEP button.
1 Set the sleep time (steps 1 - 2 on the left).
2 Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, page 21).
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep
time. The time will decrease as follows.
Sleep timer setting Timer playback setting
5 minutes - 3 hours
The amount of sleep time can also be changed whilst in the
sleep mode.
(Maximum: 3 hours - Minimum: 5 minutes)
Sleep operation will
automatically stop.
Timer playback
start time
3:00
OFF
2:00
5
1:30
15
1:00
30
10
3 Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
The volume will turn down 40 seconds before the sleep opera-
tion finishes.
22
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
XL-MP10H
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
! Tuner
Symptom
Possible cause
" The radio makes unusual " Is the unit placed near the TV or
noises continuously.
computer?
" Is the FM/AM loop aerial placed
properly? Move the aerial away
from the AC power lead if located
nearby.
! General
Symptom
" The clock is not set to the " Did a power failure occur? Reset
correct time. the clock. (Refer to page 9.)
" When a button is pressed, " Set the unit to the power stand-
Possible cause
! Cassette deck
the unit does not respond.
by mode and then turn it back on.
Symptom
Possible cause
" If the unit still malfunctions, reset
it. (Refer to page 24.)
" Cannot record.
" Is the erase-prevention tab re-
moved?
" No sound is heard.
" Is the volume level set to "0"?
8
" Cannot record tracks with " Is it a normal tape? (You cannot
" Are the headphones connected?
proper sound quality.
" Cannot erase completely.
" Sound skipping.
record on a metal or CrO tape.)
" Are the speaker wires discon-
nected?
" Is there slack in the tape?
" Is the tape stretched?
! CD player
" Cannot hear treble.
" Are the capstans, pinch rollers,
or heads dirty?
Symptom
Possible cause
" Sound fluctuation.
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid- " Does the disc satisfy the stan-
! Remote control
dle or is not performed
properly.
dards?
Symptom
Possible cause
" Is the disc distorted or
" The remote control does " Is the AC power lead of the unit
scratched?
not operate.
plugged in?
" Playback sounds are
skipped, or stopped in the
middle of a track.
" Is the unit located near excessive
" Is the battery polarity correct?
" Are the batteries dead?
vibrations?
" Is the disc very dirty?
" Is the distance or angle incor-
rect?
" Has condensation formed inside
the unit?
" Does the remote control sensor
receive strong light?
23
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
XL-MP10H
! Cleaning the CD pickup lens
Do not touch the laser pickup lens. If finger-
prints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.
! If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Note:
Caution:
If neither operation above restores the unit, clear all the memory by
resetting it.
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
! Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
! Cleaning the tape-handling parts
2
Whilst pressing down the MEMORY/SET button and the CLEAR
button, press the ON/STAND-BY button until "CL" appears.
" Dirty heads, capstan or pinch roller can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch roller, etc., unplug the unit which
contains high voltages.
Erase head
Recording/
Caution:
C
A
B
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
D
Playback head
Capstan
Pinch roller
! Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
" After long use, the deck's heads and capstan may become
magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
24
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
XL-MP10H
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! CD player
Type
Compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
20 - 20,000 Hz
! General
Frequency
response
Power source
AC 230 - 240 V, 50 Hz
Power on: 25 W
Dynamic range
90 dB (1 kHz)
Power
consumption
Power stand-by: 0.9 W
Dimensions
Width: 160 mm
Height: 242 mm
Depth: 250 mm
! Cassette deck
Frequency
response
125 - 8,000 Hz (normal tape)
Weight
2.3 kg
8
Signal/noise ratio
Wow and flutter
50 dB (recording/playback)
0.3 % (WRMS)
! Amplifier
Output power
RMS: 10 W (5 W + 5 W) (10 % T.H.D.)
Speakers: 4 ohms
! Speaker
Output terminals
Type
10 cm full-range speaker
10 W
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Maximum input
power
Rated input power 5 W
! Tuner
Impedance
Dimensions
4 ohms
Frequency range
FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
Width: 130 mm
Height: 240 mm
Depth: 161 mm
Weight
1.4 kg/each
25
04/10/21
XL-MP10H(A)E2.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
04/10/27
XL-MP10H(A)_MEMO.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR LOCATION ENQUIRIES WITHIN
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
OR CALL SHARP CUSTOMER CARE
1300 135 022
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
(LOCAL CALL COST APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
40
04/10/27
XL-MP10H(A)_WA.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the
date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused
by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin
infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
IMPORTANT
ZEALAND LIMITED
SHARP CORPORATION OF
NEW
F
DO NOT RETURN THIS DOCUMENT TO SHARP
59 Hugo Johnston Drive
Penrose, Auckland
For your reference, please enter the particulars of your purchase below and retain,
with your purchase documentation.
ITED
RATION O
)
4
0
0
2
E
rive
N
2148
U
(J
ARP CORPO
SH
4
1
0
Model No.
Serial No.
Date of Purchase
Retailer
rm
fo
40 003 039 405
P
AUSTRALIA PTY. LIM
ood NSW
S
ABN
1 Huntingwood D
Huntingw
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
TINSEA036SJZZ
04L N HK 1
SHARP CORPORATION
04/10/13
XL-MP10H(A)_BACK.fm
TINSEA036SJZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|