CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LCD COLOR TV
OPERATION
MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
LC-13SH1U
LC-15SH1U
LC-20SH1U
(13 INCH EASEL TYPE TABLE STAND)
15 INCH EASEL TYPE TABLE STAND
(20 INCH EASEL TYPE TABLE STAND
(
)
)
THIS SYMBOL INDICATES
THAT DANGEROUS
VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS
PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPOTANT
OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE
FEATURES
●
MTS/SAP Tuner
LITERATURE ACCOMPANYING
●
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system pro-
vides free and easy channel selection and lets you tune directly to any channel using the number buttons (0~9
and +100-key) on the remote control.
THE APPLIANCE
.
●
The important note is located on the rear of the cabinet.
●
●
●
●
On-Screen Function Display
WARNING:
Remote Control
Sleep Timer
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded
tapes, etc. with either a dialogue caption or text display added to the program.
Auto Shut Off Function- If there is no signal input from the antenna terminal and no user operation for 15
minutes, the TV will turn itself off automatically.
●
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
●
●
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the
authority to operate this equipment if an unauthorized change or modification is made.
S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes, Video
Discs, Satellite System, Video Game or Video Cameras.
U.S.A. ONLY
●
Component Input
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.”
PRECAUTIONS
●
Place your TV in a room with adequate ventilation.
●
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as rugs or blankets.
●
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may
be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or
●
Leave enough room for air to circulate around the bottom, top and back of the set.
This manual describes the LC-13SH1U, LC-15SH1U, and LC-20SH1U. These three
models are different in size and shape, but operate identically. The LC-20SH1U is
illustrated in this manual.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.
The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
To prevent fire, never place any type of candle or flames on the top or near the TV set.
Products that have earned the ENERGY STAR® are designed to protect the environment
through superior energy efficiency.
To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids,
such as vases, should be placed on the product.
The serial number of this product may be found on the back of the TV. No others have the same serial number as
yours. You should record the number and other vital information here and retain this book as a permanent record of
your purchase to aid identification in case of theft.
U.S.A. ONLY
IMPORTANT:
Model No.:
Serial No
To aid reporting in case of loss or theft, please record the TV’s model and serial
numbers in the space provided. The numbers are located at the rear of the TV.
Warranties are located on the back of the Spanish Operation Manual.
1EMN20180
Printed in China
9HS1EMN20180
L0171UB/L0270UA/L0370UA * * * *
FIGURE A
DEAR SHARP CUSTOMER
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
Thank you for your purchase of the Sharp LCD COLOR TV. To ensure safety and many years of trouble-
free operation of your product, please read the IMPORTANT SAFEGUARDS carefully before using this
product.
GROUND
CLAMP
IMPORTANT SAFEGUARDS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
1. Read instructions-All the safety and operating instruc-
tions should be read before the appliance is operated.
2. Retain Instructions-The safety and operating instruc-
tions should be retained for future reference.
excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
ELECTRIC
SERVICE
EQUIPMENT
9. Ventilation-Slots and openings in the cabinet and the
back or bottom are provided for ventilation and to
ensure reliable operation of the TV and to protect it
from overheating, these openings must not be blocked
or covered. The openings should never be blocked by
placing the TV on a bed, sofa, rug, or other similar
surface. This TV should never be placed near or over a
radiator or heat register. This TV should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufac-
turer’s instructions have been adhered to .
10. Power Sources-This TV should be operated only from
the type of power source indicated on the marking
label. If you are not sure of the type of power supply
to your home, consult your appliance dealer or local
power company. For TVs intended to operate from bat-
tery power, or other sources, refer to the operating
instructions.
11. Grounding or Polarization-This TV is equipped with a
polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
3. Heed Warnings-All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructions
should be followed.
5. Cleaning-Unplug TV from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol clean-
ers. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninter-
rupted service and that for some specific reason, such
as the possibility of the loss of an authorization code
for a CATV converter, is not intended to be unplugged
by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in
the cleaning description otherwise required in item 5.
6. Attachments-Do not use attachments not recommend-
ed by the TV manufacturer as they may cause hazards.
7. Water and Moisture-Do not use this TV near water, for
example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming
pool, and the like.
GROUND CLAMPS
NEC
-
NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
S2898A
tection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA
No. 70, provides information with respect to proper
grounding of the mast and supporting structure, ground-
ing of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and require-
ments for the grounding electrode. (Fig. A)
other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this TV from the
wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as improper adjustment of other controls
may result in damage and will often require extensive work by
a qualified technician to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in perfor-
mance-this indicates a need for service.
20. Replacement Parts-When replacement parts are
required, be sure the service technician uses replace-
ment parts specified by the manufacturer that have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, injury
to persons or other hazards.
14. Lightning-For added protection for this TV receiver during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the TV due to lightning and power-line surges.
15. Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light of power circuits, or where it can fall into
such power lines or circuits. When installing an out-
side antenna system, extreme care should be taken to
keep from touching such power lines or circuits as
contact with them might be fatal.
16. Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind
into this TV through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the TV.
18. Servicing-Do not attempt to service this TV yourself as opening
or removing covers may expose you to dangerous voltage or
8. Accessories-Do not place this TV on an unstable cart,
stand, tripod, bracket, or table. The TV may fall, caus-
ing serious injury to someone, and serious damage to
the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the TV.
PORTABLE CART WARNING
Any mounting of the appliance
should follow the manufacturer’s
instructions and should use a
mounting accessory recommended
by the manufacturer. An appliance
and cart combination should be
21. Safety Check-Upon completion of any service or repairs to this
TV, ask the service technician to perform routine safety checks
to determine that the TV is in proper operating condition.
22. Heat-This TV product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
13. Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV, be sure the antenna
or cable system is grounded so as to provide some pro-
moved with care. Quick stops,
S3126A
TABLE STAND
EASEL TYPE
The angle of the TV has to be kept at 18°.
CAUTION :
Be careful not to hurt your fingers with the stand.
Do not pick up the TV by its stand.
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOSED CAPTION
PREPARATION FOR USE (Continued)
[CLOSED CAPTION SELECTION]
This TV can receive Caption and Text.
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo following the steps below.
Menu
You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with
either a dialogue caption or text display added to the program.
To show the status, press the
DISPLAY button on the remote
control.
Selection
MAIN
MONO
SAP
Type of
broadcast
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH ▲ or ▼ button to point to "CAPTION".
3) Press the VOL + or – button to select the mode you wish.
-None-
-None-
MONO
MAIN
-None-
Regular
SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
Stereo
STEREO
STEREO
broadcast
4) When done, press the MENU button to exit the menu.
: Press the VOL + or – button.
MAIN
SAP
SAP
- TV SET UP -
- TV SET UP -
- TV SET UP -
- TV SET UP -
- TV SET UP -
[To Select STEREO, MONO or SAP in Stereo broadcast]
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH ▲ or ▼ button to point to "TV SOUND".
3) Press the VOL + or – button to select your desired stereo mode.
([MAIN], [MONO] or [SAP])
[ENGLISH]
[ENGLISH]
CAPTION1
[MAIN]
[ENGLISH]
CAPTION2
[MAIN]
[ENGLISH]
[TEXT1]
[MAIN]
[ENGLISH]
[TEXT2]
[MAIN]
[OFF]
[
]
[
]
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
BACK LIGHT [BRIGHT]
SLEEP
BACK LIGHT [BRIGHT]
SLEEP
BACK LIGHT [BRIGHT]
SLEEP
BACK LIGHT [BRIGHT]
SLEEP
[ 0] MINUTE
[ 0] MINUTE
[ 0] MINUTE
[ 0] MINUTE
[ 0] MINUTE
: Press the VOL + or – button.
[CAPTION MODE]
- TV SET UP -
- TV SET UP -
- TV SET UP -
1) Closed Caption Characters can be displayed on the TV screen only when the received broad-
cast signal contains Caption Signals.
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
[ENGLISH]
[ENGLISH]
[ENGLISH]
[OFF]
[SAP]
2) Paint-on mode: Displays input characters on the screen immediately.
Pop-on mode: Once characters are stored in memory, they are displayed all at once.
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
Note: If [CAPTION1] or [CAPTION2] is selected but a Closed Caption signal is not included,
characters will not be displayed.
[OFF]
[OFF]
[MAIN]
[MONO]
BACK LIGHT [BRIGHT]
SLEEP
BACK LIGHT [BRIGHT]
SLEEP
BACK LIGHT [BRIGHT]
SLEEP
[ 0] MINUTE
[ 0] MINUTE
[ 0] MINUTE
4) Press the MENU button to exit the menu.
[TEXT MODE]
1) Displays the text on the screen by scrolling (max. 7 lines).
2) If the received broadcast signal does not contain caption or text signals, no change will occur.
Notes:
1) When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or
text.
2) Captions and texts may not match the TV voice exactly.
3) Interference may cause the closed caption system not to function properly.
4) The caption or text characters will not be displayed while the menu display or functions dis-
play is shown.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH ▲ or ▼ button or the Number buttons.
3) Adjust the volume to the desired listening level using the VOL + or – button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
USING AUDIO/VIDEO INPUT JACKS
When you use the AUDIO/VIDEO input jacks, select “AV1” or “AV2” mode by pressing the
INPUT button.
5) If you see this screen:
●
To use the jacks of AV-IN1 on the TV, select “AV1”.
To use the jacks of AV-IN2 on the TV, select “AV2”.
●
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To
clear screen, select [CAPTION1], [CAPTION2] or [OFF].
Note:
●
When you use the S-VIDEO connection, S-VIDEO jack is given priority over the VIDEO jack.
OPERATIONS (Continued)
SETTING THE SLEEP TIMER
BACK LIGHT SELECTION
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH ▲ or ▼ button to point to "BACK LIGHT".
3) Press the VOL + or – button to select the mode you wish.
Use Sleep Timer to program the TV to shut off in a certain amount of time.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears on the TV screen.
3) Press the CH ▲ or ▼ button to point to "SLEEP".
4) When done, press the MENU button to exit the menu.
: Press the VOL + or – button.
Then press the VOL + button.
4) Press the VOL + or – until the correct amount of time
appears on the TV screen.
The time increases by 30 minutes. You may set
a Sleep Timer of 30, 60, or 90 minutes.
To cancel the sleep timer:
Press the VOL + or – repeatedly
until "SLEEP [0] MINUTE" is
displayed.
- TV SET UP -
- TV SET UP -
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
[ENGLISH]
[ENGLISH]
[ENGLISH]
[OFF]
[OFF]
[OFF]
[MAIN]
[MAIN]
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
BACK LIGHT [NORMAL]
SLEEP
BACK LIGHT [DARK]
SLEEP
[ 0] MINUTE
[ 0] MINUTE
[ 0] MINUTE
Note: When you disconnect the unit from the AC outlet or when you have a power failure,
the sleep time will be lost.
: Press the VOL + or – button.
- TV SET UP -
-
TV SET UP -
-
TV SET UP -
-
TV SET UP -
V-CHIP SET UP
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
BACK LIGHT
SLEEP
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
BACK LIGHT
SLEEP
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
BACK LIGHT
SLEEP
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies
on premium cable channels, and Emergency Broadcast System signals), then denies access to pro-
gramming if the program's rating meets or exceeds the limitations you select. In this case, "PRO-
TECTED PROGRAM by ..." message appears on the TV screen.
[ENGLISH]
[ENGLISH]
[OFF]
[ENGLISH]
[OFF]
[ENGLISH]
[OFF]
[OFF]
[MAIN]
[MAIN]
[MAIN]
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
[
BRIGHT
]
[
BRIGHT
]
[
BRIGHT
]
[ 0] MINUTE
[30] MINUTE
[60] MINUTE
[90] MINUTE
To block certain ratings, follow the steps below.
PICTURE ADJUSTMENT
●
Programming may be rated by the Motion Picture Association of America (MPAA) or accord-
ing to the Television Parental Guidelines. In order to block any inappropriate programming, set
your limits in both places (MPAA RATING and TV RATING).
You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In
1) Press the MENU button so that the menu
display appears on the TV screen.
VOL –
VOL +
●
2) Press the CH ▲ or ▼ button to point “PIC-
TURE”. Then press the VOL + button.
3) Select the feature you wish to adjust with
the CH ▲ or ▼ button and adjust it with
the VOL + or – button.
to decrease
brightness
to increase
brightness
BRIGHTNESS
CONTRAST
this case, change to an unblocked channel, then press the MENU button.
[MPAA RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV screen.
to decrease
contrast
to increase
contrast
- TV SET UP -
PICTURE
COLOR
to pale
to purple
to soft
to brilliant
to green
to clear
CHANNEL SET UP
V-CHIP SET UP
2) Press the CH ▲ or ▼ button to point to "V-CHIP SET UP".
Then press the VOL + button.
3) Use the number buttons to enter 4-digit access code. The default access
code is 0000. If you have not set up your personal access code, you should
use 0000.
LANGUAGE
CAPTION
[ENGLISH]
[OFF]
TINT
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
[ 0] MINUTE
SHARPNESS
: Press the CH ▲ or ▼ button.
ACCESS CODE
4) Press the CH ▲ or ▼ button to point to "MPAA RATING". Then press the
VOL + button.
– – – –
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
-
-
+
-
+
-
+
-
+
+
5) Press the CH ▲ or ▼ button to point to your desired item.
Then press the VOL + button to select [BLOCK] or [VIEW].
- V-CHIP SET UP -
TV RATING
MPAA RATING
CHANGE CODE
Note:
●
In the above steps, the picture adjustment display will disappear from the TV screen automati-
cally after approximately 5 seconds if you do not press any buttons. Press the MENU and VOL
+ button so that "PICTURE" is selected. Then press the CH ▲ or ▼ button repeatedly until the
display returns to the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS (Continued)
[V-CHIP SET UP SUB RATINGS]
When you select TV-Y7, TV-PG, TV-14 or TV-MA and you press the VOL + button, the sub-rat-
ings will appear on the TV screen.
If you select the rating category (example: TV-PG) and set it to [BLOCK] or
[VIEW], the sub-ratings (example: V for Violence) will turn to [BLOCK] or
[VIEW] automatically.
<Selection>
• G:
• PG:
• PG-13:
• R:
• NC-17:
• X:
<Rating Category Explanations>
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
B
G
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
PG
PG-13
R
NC-17
X
TV-Y
TV-Y7 (
TV-G
TV-PG(DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
TV-MA( LSV) [BLOCK]
[VIEW]
) [VIEW]
[BLOCK]
B
Mature audience only
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rat-
ing category is set to [BLOCK]. To set the sub-ratings individually, follow the
steps below.
●
When you select the rating category and set it to [BLOCK], the higher rating will turn to
[BLOCK] automatically. Also, the lower rating will turn to [VIEW] automatically.
When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW]
automatically.
●
●
●
TV-Y7
FV
[BLOCK]
[BLOCK]
When you select [TV-Y7]:
B
Press the CH ▲ or ▼ button to select "FV" (Fantasy Violence). Then press
When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically.
the VOL + button to select [BLOCK] or [VIEW].
When you select [TV-PG], [TV-14] or [TV-MA]:
6) Press the MENU button to exit the menu.
●
Press the CH ▲ or ▼ button to select "D" (Suggestive Dialog), "L"(Coarse
Language), "S"(Sexual Situation) or "V" (Violence). Then press the VOL +
button to select [BLOCK] or [VIEW].
Note: When you select [TV-MA], "D" does not appear on the TV screen.
The sub-ratings which set to [BLOCK] appear next to the rating category in the
[TV RATING SET UP]
TV-PG
[BLOCK]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH ▲ or ▼ button to point to "V-CHIP SET UP".
Then press the VOL + button.
3) Use the number buttons to enter 4-digit access code. The default access
code is 0000. If you have not set up your personal access code, you should
use 0000.
B
D
L
S
V
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
ACCESS CODE
– – – –
●
"
TV RATING
"
menu.
●
Press the MENU button to exit the menu.
- V-CHIP SET UP -
[V-CHIP ACCESS CODE]
To change access code, follow steps.
4) Press the CH ▲ or ▼ button to point to "TV RATING". Then press the
VOL + button.
5) Press the CH ▲ or ▼ button to point to your desired item.
Then press the VOL + button to select [BLOCK] or [VIEW].
TV RATING
- TV SET UP -
MPAA RATING
CHANGE CODE
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
TV SOUND
1) Press the MENU button, then press the CH ▲ or ▼ button to select "V-
CHIP SET UP". Press the VOL + button to continue.
2) Press the number buttons to enter your old access code. If you have never
set up your personal access code, use 0000.
3) Press the CH ▲ or ▼ button to select "CHANGE CODE". Then press the
VOL + button to continue.
4) Use the number buttons to enter your desired access code in the NEW
CODE space. Then enter the same code in the CONFIRM CODE space.
Your new access code is set. You will return to the "V-CHIP SET UP".
If the code in the CONFIRM CODE space does not match the code in the
NEW CODE space, repeat step 4, making sure you enter the same new code
exactly in the CONFIRM CODE space.
[ENGLISH]
[OFF]
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
[ 0] MINUTE
B
TV-Y
TV-Y7 (
TV-G
TV-PG(
TV-14 (
TV-MA(
[VIEW]
) [VIEW]
[VIEW]
) [VIEW]
) [VIEW]
) [VIEW]
<Selection>
• TV-Y:
• TV-Y7:
• TV-G:
<Rating Category Explanations>
Appropriate for all children
Appropriate for children seven and older
General Audience
ACCESS CODE
– – – –
• TV-PG:
• TV-14:
• TV-MA:
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
- V-CHIP SET UP -
●
When you select the rating category and set it to [BLOCK], the higher rating will turn to
[BLOCK] automatically. Also, the lower rating will turn to [VIEW] automatically.
When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or
[VIEW] automatically.
TV RATING
MPAA RATING
CHANGE CODE
●
●
NOTES:
●
If a power failure occurs, the default code, 0000, will be the active access
When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically.
NEW CODE
code again.
6) Press the MENU button to exit the menu.
– – – –
CONFIR–M–CO–DE–
●
If you connect the power cord to an AC outlet that is controlled by a wall
switch, your personal access code will be erased every time you turn off the
power at the wall switch. The default code will be the active code again.
[IF YOU FORGET YOUR ACCESS CODE]
You should restore the access code to default code, 0000. To restore 0000 as your personal access
code, unplug the TV’s power cord for 10 seconds, then plug it in again.
TROUBLESHOOTING GUIDE
MAINTENANCE
CABINET CLEANING
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save your time and money.
PICTURE SCREEN CLEANING
●
Wipe the front panel and other exterior sur-
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
If the LCD panel should require cleaning, wipe
it with a cotton or soft cloth. Before cleaning
the picture screen, disconnect the power cord.
●
Never use a solvent or alcohol. Do not
spray insecticide liquid near the TV. Such
chemicals may cause damage and discol-
oration to the exposed surfaces.
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
SUPPLIED ACCESSORIES
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Operation Manual
(1EMN20180/9HS1EMN20180)
(1EMN20181/9HS1EMN20181)
Remote control unit
(UREMT21SH001/
9HSUREMT21SH001)
1
4
7
2
5
8
0
3
6
OPERATION
MANUAL
Power at outlet?
9
100
Is TV’s POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
LCDTV
Batteries ("AA" x 2)
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
SPECIFICATIONS
GENERAL SPECIFICATIONS
Move the TV away from the nearby appliances which have Magnetism.
Turn off using the POWER button, then turn it on again 30 minutes or so later.
Temperature around is too low.
Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace.
It is quality of the LCD Panel.
OTHER SPECIFICATIONS
Television system:
NTSC-M
Remote control:
Digital encoded
infrared light system
AC120V, 60Hz
TV Standard
Closed Caption System: §15.119/FCC
Channel coverage
VHF:
UHF:
CATV:
Power requirements:
Closed Caption Problem
Possible Remedy
[LC-13SH1U]
2 ~ 13
14 ~ 69
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
Power consumption (Maximum): 56W
My TV is showing captions that are
misspelled.
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
LCD:
13"
Dimensions (H x W x D): 12-3/4" x 13" x 3-13/16"
(including the table stand) (325mm x 330mm x 97mm)
Weight:
6.8 lbs. (3.1kg)
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue
or there is a delay of what is being said.
Tuning System:
Channel access:
(including the table stand)
[LC-15SH1U]
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Power consumption (Maximum): 65W
LCD:
15"
Dimensions (H x W x D)
:
14-1/16" x 14-15/16" x 3-13/16"
(including the table stand) (357mm x 379mm x 97mm)
My captions are scrambled with white
boxes on the TV screen.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Terminals
Antenna input:
Weight:
7.9 lbs. (3.6kg)
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
(including the table stand)
[LC-20SH1U]
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
Power consumption (Maximum): 73W
S-Video input:
Video input:
Audio input:
Mini DIN 4-pin jack
RCA connector x 1
RCA connector x 4
LCD:
20"
Dimensions (H x W x D): 17-1/2" x 19-7/16" x 4-3/16"
(including the table stand) (445mm x 493mm x 107mm)
Component video input:
Weight:
(including the table stand)
11.9 lbs. (5.4kg)
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
One pin jack (Y), 1Vpp (75 ohm)
Two pin jacks (PR)/(PB), 700mVpp (75 ohm)
Headphone:
1/8" stereo (3.5 mm)
•Designs and specifications are subject to
change without notice and without our
legal obligation.
•If there is a discrepancy between languages,
the default language will be English.
Stereo Sound System
2 speakers
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION
channels. [OFF].
2 ways AV input
Sound output:
1W, 8 ohm x 2
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active
pixels may appear as a tiny spec of color. This in not to be considered a defect in the LCD screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
|