Sanyo Vacuum Cleaner SC X1801 User Guide

INSTRUCTION MANUAL  
Vacuum Cleaner  
SC-X1801R  
This SC-X1801R consist of  
vacuum cleaner SC-X1801  
and handy cleaner SC-H24.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Use only as described in this manual. Use only supplied attachments.  
Do not leave appliance when plugged in. Unplug from outlet when not in  
use  
Do not store or use the vacuum cleaner close to high temperature places.  
Keep the vacuum cleaner free of insecticides. Do not wipe with benzene,  
thinner, petrol or other oils which might cause discoloration or cracking. To  
clean the body, dampen a cloth with mild detergent and wipe clean.  
Do not use outdoors or on wet surfaces.  
Avoid using in a vertical position.  
Do not allow to be used as a toy. Children should be supervised to ensure  
that they do not play with the appliance.  
These appliances (SC-X1801 and Handy Cleaner SC-H24) are not  
intended for use by persons (including children) with reduced physical,  
sensory or mental capabilities, or lack of experience and knowledge,  
unless they have been given supervision or instruction concerning use of  
the appliance by a person responsible for their safety.  
Do not handle plug or appliance with wet hands.  
Hold plug when they rewinding onto cord reel. Do not allow plug to whip  
when rewinding.  
Do not pull or carry by cord, pedal cord, use cord as a handle, close a door  
on cord, or pull cord around sharp edges or corners. Do not run appliance  
over cord. Keep cord away from heated surfaces.  
Do not put any object into openings. Do not use with any opening blocked;  
keep free of dust, lint, hair, and anything that may reduce air flow.  
Keep hair, loose clothing, fingers, and all parts of body away from  
openings and moving parts.  
Unplug before connecting any hose attachment accessory.  
Turn off all controls before unplugging.  
Make sure the power supply :  
230-240V, 50Hz for SC-X1801, 220-240V, 50-60Hz for SC-H24  
Use extra care when cleaning stairs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before the first operation, make sure the dust cup is properly installed.  
Do not use the machine without HEPA filter and motor protection filter in  
place. (SC-X1801 only)  
Blocking the suction inlet will decrease the efficiency of the motor.  
Never try to vacuum the following objects. They may damage the unit or  
case a fire.  
*Burning or smoking such as cigarettes, matches or hot ashes.  
*Wet things, mud, soil, and fluids.  
*Needles and razor blades.  
*Inflammable materials or combustible liquids such as gasoline and  
thinner.  
*Construction rubbish.  
The following kinds of treatment shorten hose lifetime:  
*Bending hose at an acute angle when storing.  
*Pulling the hose with excessive force  
*Placing heavy objects on, or stepping on the hose.  
When vacuuming places that are very dusty, and also when vacuuming  
regularly, empty the dust compartment before it becomes completely filled.  
Frequent emptying lengthens the lifetime of the motor and maintains  
strong suction power.  
If the supply cord is damaged, it must be replaced by the manufacturer, its  
service agent or similarly qualified persons in order to avoid a hazard.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Vacuum Cleaner SC-X1801  
Introduction of Parts  
1
Power cord  
2
3
4
5
6
7
8
9
Cord rewinding pedal  
Handle  
ON/OFF switch pedal  
Speed control  
Front cover clip  
Hose socket  
Dust cup  
Dust cup handle  
10 Wheels  
Accessories: 1 set hose accessory  
1 piece floor brush  
1 set tube  
1 combination nozzle  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use Instructions  
1. Connect the hose accessories; insert the hose end into the hose socket  
at the front cover and then hook it. Figure_1  
Make sure the front cover is firmly locked before hose setting.  
2. Connect the tube to the curved end of the hose. Figure_2  
3. Connect the different tools to the tube for different cleaning purposes;  
Floor brush (adjusted to the type of ground) for carpet or floor.  
Combination nozzle for sofa, wall surface, curtain, corner or space  
between furniture etc. Figure_3  
4. Before starting operation, pull out the power cord and then insert the  
plug into the power socket which conforms to that on the rating label for  
power supply.  
5. Turn on the machine. Press the on/off switch pedal, the machine could  
start working. Figure_5  
6. The machine would start working without speed control. To control  
suction power, slide the speed control on the body. Suction power can  
also be controlled by sliding the airflow control on the hose. Figure_4  
7. Combination nozzle; Use the crevice nozzle on vacuum edges and  
gaps. The head of the combination nozzle can rotate. Use the round  
brush to vacuum sofa, curtain or fragile or easily scratched items.  
8. Turn off the machine: press the on/off switch pedal again, the machine  
is turned off. Pull the plug out of the power socket. Figure_6  
9. Cord rewinding; Before rewinding, be sure to the cord is unplugged.  
To rewind the power cord, press the cord rewinding pedal, the power  
cord will be drawn in. Figure_7  
10. Moving the machine. Carrying it by using the carry handle.  
11. Remove the hose accessories; press the adaptors at both side of the  
hose end and then pull the hose accessories. Figure_8  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attention: To lock the front cover firmly, snick it softly until it sounds “Click”  
If the blockage is found in floor brush, hose or tubes and the  
machine, the machine can be re-operated only after the  
blockage is cleaned away completely.  
This vacuum cleaner can be used as tip the rubbish out of the  
full dust cup.  
Figure_1  
Figure_2  
Figure_3  
Figure_4  
Figure_5  
Figure_6  
Figure_7  
Figure_8  
Maintenance  
CAUTION  
Be sure to turn the power off and unplug the unit before cleaning.  
1. Clear the dust: when the dust collect to the MAX label of the filter,  
rubbish shall be tipped from the dust barrel.  
1) Press the front cover clip beside the suction socket and open the  
front cover.  
2) Take out the dust cup and clean the dust away completely.  
3) Clean the dust cup with warm water if necessary.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Clean Filters:  
HEPA filter;  
1) Open the front cover: Press the buttons at the both side of socket hole  
and open it slowly. Figure_9,Figure_10  
2) Dump the dust collection out of the dust cup. Figure_11  
3) Rotate the filter and detach from the filter grill. Wash the filter in warm  
water and clean it with bush. Then, dry it completely before put it back  
to the dust cup. Be sure to dry naturally to prevent deformation.  
Figure_12  
Motor exhaust filter;  
1) Take out the filter (Figure_13, 14) and wash in warming water. It can be  
used after drying completely before put it back to the dust cup and be  
sure to dry naturally to prevent deformation.  
It should be rinsed once a year.  
If the filter is damaged, a new filter should be replaced.  
Figure_9  
Figure_10  
Figure_11  
Figure_12  
Figure_13  
Figure_14  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Specification  
Input power :  
1800W  
Input voltage :  
Protection class:  
230-240V , 50Hz  
class ll  
Power cord length: 5m  
Dust capacity : 2L  
Trouble Shooting  
If you have a problem with your cleaner, consult the handy guide as below. If  
the cleaner is malfunctioning, do not operate it before asking for service.  
Problem  
Possible Solution  
Clean the filter and clean up the inside of the dust cup.  
Clean or replace the filter.  
Remove the blockage.  
Noisy operation  
Low Suction  
Put the dust cup in place.  
Clean the filters, and clean up the inside of the dust cup.  
Check for blockages and unblock and allow it to cool.  
Plug unit firmly.  
Over-heating/  
Automatically Stopping  
Decrease  
vacuum power  
of  
the If the vacuum power decrease, rinse the HEPA filter and  
the exhaust filter  
Cannot Find  
Nozzle is clipped into a compartment at the bottom edge  
the  
Nozzle  
Combination on the back of the vacuum cleaner (between the wheels).  
It is a single attachment.  
Due to the strong suction power, it may be difficult to push,  
especially thick carpet. Rather than to use the floor brush  
forcibly, lift up the Floor Brush momentarily. It allows air to  
Floor Brush hard to flow into the vacuum releasing and built up suction  
push  
pressure, and then do well to push floor brush.  
Slide and open the suction adjuster located on the hose  
handle grip. This will reduce suction power of the floor  
head.  
Cord  
rewind  
doesn’t  
fully  
Pull out the cord and rewind again.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handy Cleaner SC-H24  
Introduction of Parts  
Switch;  
Press the “ “side of the switch to start the motor.  
To stop the motor, press the “” side of the switch.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Caution  
Never insert the filter into the vacuum cleaner ,unless it is completely dry.  
Dust Disposal:  
Turn off the vacuum cleaner and unplug it, then remove the dust as follows.  
1. To remove the dust box,  
push the clamp button as show.  
Clamp button  
2. To remove the filter,  
removing the dirt.  
If the dust is packed tightly and  
difficult to remove, tap the dust  
compartment lightly.  
3. Insert the filter to the dust box.  
Dust box  
Filter  
4. To reassemble the unit  
If the dust box can not be  
closed, the filter is not properly  
installed.  
Dust box  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care of filter:  
A severely soiled or clogged filter should be thoroughly  
washed with fresh tepid water.  
Washing  
Drying  
A neutral detergent could be used if required.  
To assure the best results, we recommend cleaning the filters  
once a year, depending on usage.  
Technical Specification  
Input power :  
350-400W  
220-240V , 50-60Hz  
class II  
Input voltage :  
Protection class :  
Power cord length:  
Dust capacity :  
4.5m  
0.4L  
Trouble Shooting  
If you have a problem with your vacuum cleaner, consult the handy guide  
below. If the vacuum cleaner is malfunctioning, do not operate it. Contact your  
dealer or the nearest Sanyo Service center.  
Problem  
Possible Cause  
Possible Solution  
Plug unit in firmly.  
Not firmly plugged in.  
Cleaner won't run.  
Suction does not  
Check  
fuse  
or  
No voltage in wall outlet  
breaker.  
increase  
after Filter dirty.  
Clean out the filter.  
cleaning out the dirt.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Raymarine Marine Instruments 86124 1 User Guide
RCA Flat Panel Television D61W136D User Guide
RCA Marine Battery AH630R User Guide
Remington Electric Shaver NE 300 User Guide
Roland Video Game Keyboard RS 50 User Guide
Russell Hobbs Freezer RHCF150 User Guide
Saab Automobile M2003 User Guide
Samsung Home Theater System HT C5550 User Guide
Samsung Microwave Oven ME179KFETSR User Guide
Sanyo Projector PCL WXU10B User Guide