Surface-Type Door Closer
SD-C141S With Adjustable Sweep and Latch Speed
Reversible non-handed design.
For metal or wood doors up to 42" (107cm) wide.
Two independent valve adjustments for easy
setting of sweep and latch speed.
Back plate slides into place to cover adjustment
screws.
3
Narrow projection of only 1 /8" (35mm).
Anodized aluminum body.
Silver finish.
Forged steel arms.
Includes complete mounting hardware.
Two independent
valve adjustments:
1. Latch speed
2. Sweep speed
Rim-Type Exit Device
SD-962AR-36A For Exit Doors from 30" (76cm) to 48" (122cm) Wide
NEW
SD-962HL-4A
Entry-Type Lever Trim, Non-Handed
SD-962AR-36A
For exit doors -- Allows exit from inside while locked
from outside.
Reversible non-handed design.
3
For metal or wood doors up to 1 /4" (45mm) thick.
3
Stainless-steel, /4" (19mm) throw latch bolt.
Deadlocking latch -- Prevents the use of credit
cards or similar means to open the latch bolt.
1
Allen-type /4-turn dogging lock -- Allows the exit
bar to be unlocked for extended periods of time.
Includes all hardware for typical installations.
Works with standard external door handle/lock
devices such as SD-962HL-4A (see below).
Heavy-duty steel construction.
SD 962AR 36A
Stainless-steel spring.
SD-962HL-4A
Entry-type lock (locks from outside, opens freely
from inside).
SC4, 6-pin lock.
Two keys included.
SD 962HL 4A
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Request-to-Exit Plates
S.P.D.T.
D.P.S.T.
35/16" (84mm)
27/8" (74mm)
SD-7201GA-PT1
SD-7201GC-PE1
½
Green, 1½” dia., mushroom-cap
pushbutton.
Green, 1 ” dia., mushroom-cap
pushbutton.
NO/NC contact rated
NO/NC contact rated
5A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.
3A@120VAC/24VDC.
“EXIT” and “SALIDA” silk-screened
on plate.
Built-in timer (1~180 sec).
Buzzer output for audio status.
25/16" (59mm)
17/8" (47mm)
27/8" (74mm)
17/8" (47mm)
D.P.D.T.
D.P.S.T.
39/16" (91mm)
SD-7201GF-PE1
SD-7201RC-PE1
½
Green, 1 ” dia., mushroom-cap
Red, 1½” dia., mushroom-cap
pushbutton.
pushbutton.
D.P.D.T. switch. Two N.O. and two
N.C. contacts rated 5A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.
NO/NC contact rated
5A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.
2½" (64mm)
NEW
NEW
RF Wireless
Pushbuttons
D.P.S.T.
Illum.
27/8" (74mm)
SD-7251GCEX1Q
For a full line of RF wireless
Request-To-Exit pushbuttons,
see page 30.
½
Green, 1 ” dia., illuminated,
mushroom-cap pushbutton.
NO/NC contact rated
5A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.
17/8" (47mm)
NEW
NEW
D.P.S.T. Timer
D.P.S.T. Timer
SD-7113-GSP
SD-7173-SSP
Green, 1½” dia.,
Stainless-steel, 1/4” dia.
pushbutton.
mushroom-cap pushbutton.
NO/NC contact rated
5A@125VAC.
NO/NC contact rated
5A@125VAC.
"EXIT" and "SALIDA"
silk-screened on plate.
Equipped with a pneumatic
timer (2~60 sec).
"EXIT" and "SALIDA"
silk-screened on plate.
Equipped with a pneumatic
timer (2~60 seconds).
D.P.S.T. Timer
D.P.S.T. Timer
SD-7213-GSP
SD-7273-SSP
Similar to SD-7113-GSP,
but single-gang.
Similar to SD-7173-SSP
but single-gang.
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless RF Request-to-Exit Plates
NEW
NEW
NEW
SD-8201GTPE1Q Single-Gang, 1½" (38mm) Diameter, Mushroom-Cap Pushbutton
SD-8202GT-PEQ Single-Gang, 2" (51mm) Square Illuminated Pushbutton
SD-8103GT-PEQ Slimline, Small Illuminated Pushbutton
21/4" (57mm)
31/8" (80mm)
4½"
(115mm)
1½"
(38mm)
4½"
(115mm)
2"
(51mm)
21/8" (54mm)
21/8" (54mm)
SD 8201GTPE1Q
SD 8202GT PEQ
211/16" (68mm)
Ideal for hard-to-wire installations such as in cement
walls or brick buildings.
Built-in RF transmitter:
– Powered by 9VDC (battery included).
– Operates at 315MHz and up to 50ft (15m).
– Over 68 billion (6.8x1010) possible codes.
– Compatible with all SECO-LARM receivers.
– LED to indicate RF transmission and low battery:
Blue: Normal Operation, Red: Low Battery
3/4"
4½"
(115mm)
(18mm)
21/8" (54mm)
SD 8103GT PEQ
"No Touch" Request-to-Exit Plates
NEW
NEW
NEW
NEW
SD-9163-KSVQ Outdoor "No Touch" Slimline Plate with Mechanical Override Button
SD-9263-KSVQ Outdoor "No Touch" Single-gang Plate with Mechanical Override Button
SD-9163-KSQ
SD-9263-KSQ
Outdoor "No Touch" Slimline Plate
Outdoor "No Touch" Single-gang Plate
SD-9163-KSVQ
Outdoor slimline "No-Touch" sensor.
Adjustable sensing range and delay time.
Mechanical override button.
SD-9263-KSVQ – Similar to SD-9163-KSVQ,
but single-gang.
SD-9163-KSQ – Similar to SD-9163-KSVQ,
but without mechanical override button.
SD-9263-KSQ – Similar to SD-9263-KSVQ,
but without mechanical override button.
SD 9163 KSVQ
SD 9163 KSQ
SD 9263 KSVQ
SD 9263 KSQ
1.949.261.2999 (CA & Int’l)
1.800.662.0800
Fax: 1.949.261.7326
28
Download from Www.Somanuals.com. All Manuals Search And Download.
"No Touch" Request-to-Exit Plates
NEW
NEW
NEW
NEW
SD-927PKC-NEQ IR "No Touch" RTE Stainless-Steel Plate (English)
SD-927PKC-NFQ IR "No Touch" RTE Stainless-Steel Plate (French)
SD-927PKC-NSQ IR "No Touch" RTE Stainless-Steel Plate (Spanish)
SD-927PWCQ
IR "No Touch" RTE Plastic Plate (English, French & Spanish)
SECO-LARM's "No Touch" Request-To-Exit Sensors use IR
technology to open a door or activate a device with the
simple wave of a hand. The trigger distance is up to 4"
(10cm). Since they are no touch, these sensors are ideal
for use in hospitals, clinics, labs, cleanrooms (to reduce the
risk of contamination), schools, factories, or offices
(anywhere an easy way to exit is required).
"No Touch" -- Just wave a hand in front of the sensor.
Sensing range up to 4" (100mm). Range is 2" (50mm)
for SD-927PWCQ.
Selectable LED color, turns from red to green or
green to red.
SD 927PKC NSQ
SD 927PKC NFQ
Reduces the risk of cross contamination.
Easy and clean operation.
Reliable IR technology senses motion.
Durable, stainless-steel, single-gang plate.
Quick-connect screwless terminal block.
SPDT 3 Amp relay output.
Optional Point-of-Sales Displays -- Display ad available
in English or Spanish, which includes a working
demonstration sensor.
SD 927PKC NEQ
SD-927PWCQ
incorporates a white
plastic faceplate to
match the décor of
many walls.
(AD DBO SD927S)
(AD DBO SD927E)
SD-927PKC-NxQ
SD-927PWCQ
Specifications
Operating voltage
12VDC
Six decals included:
Relay type
Form C dry contact, 3A@12VDC
10ms
NO TOUCH
EXIT
SALIDA
SIN TOCAR
SORTIE
Response time
Output time
0.5s or as long as unit is triggered
Sensing range
Operating temperature
Weight
4” (100mm)
2” (50mm)
4°~131° F ( 20°~55° C)
3 oz (85g)
41/2”x23/4”x11/16” (115x70x27 mm)
SANS CONTACT
Dimensions
SD 927PWCQ
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Request-to-Exit Plates--- Vandal Resistant
1½" (38mm)
1½" (38mm)
D.P.S.T.
D.P.S.T.
SD-7104SGEX1Q
SD-7204SGEX1Q
Vandal-resistant, ½” dia.,
stainless-steel pushbutton.
NO/NC contact rated
5A@250VAC.
Vandal-resistant, ½” dia.,
stainless-steel pushbutton.
NO/NC contact rated
5A@250VAC.
“EXIT” and “SALIDA”
silk-screened on plate.
“EXIT” and “SALIDA”
silk-screened on plate.
11/4" (32mm)
1½" (38mm)
11/4" (32mm)
1½" (38mm)
D.P.S.T.
D.P.S.T.
Illum.
Illum.
SD-7175SGEX1Q
SD-7275SGEX1Q
Vandal-resistant, ½” dia.,
illuminated momentary
pushbutton.
Vandal-resistant, ½” dia.,
illuminated momentary
pushbutton.
2-Color illuminated
red/green LED (12VDC).
NO/NC contact rated
5A@250VAC.
“EXIT” and “SALIDA”
silk-screened on plate.
2-Color illuminated
red/green LED (12VDC).
NO/NC contact rated
5A@250VAC.
“EXIT” and “SALIDA”
silk-screened on plate.
11/4" (32mm)
11/4" (32mm)
Request-to-Exit Key Switch Plates
SD-72051-V0 Momentary (N.C., turn to open, pre-wired) Switch, Single Gang
SD-71051-V0 Momentary (N.C., turn to open, pre-wired) Switch, Slimline
SD-72002-V0 Shunt (N.C., turn to open, pre-wired) Switch, Single Gang
SD-71002-V0 Shunt (N.C., turn to open, pre-wired) Switch, Slimline
Keylock Switch Types:
Maintained ON
SD-72051-V0
Momentary OFF
ON (N C )
Momentary Switch, Single-Gang Plate
Springs
Back
SD-71051-V0
Momentary Switch, Slimline Plate
Stainless-steel plate.
OFF (N O )
Includes shunt ON, momentary OFF
(N.C., turn to open, pre-wired) spring-loaded keylock switch.
Switch is maintained ON, springs back from OFF.
Key is removable from the ON position only.
SD 72051 V0
SD 71051 V0
Maintained ON
Single Gang
SD-72051-V0
SD-72002-V0
Slimline
SD-71051-V0
SD-71002-V0
SD-72002-V0
Shunt OFF
ON (N C )
Shunt Switch, Single-Gang Plate
SD-71002-V0
Shunt Switch, Slimline Plate
Stainless-steel plate.
OFF (N O )
Includes maintained ON/OFF,
(N.C., turn to open, pre-wired) keylock switch.
Switch can be left ON or OFF.
Specifications
Contact Rating
1A@12VDC
SS 090KN 0
SD 72002 V0
SD 71002 V0
Key is removable from the ON or OFF position.
Replacement Keys
1.949.261.2999 (CA & Int’l)
1.800.662.0800
Fax: 1.949.261.7326
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Tubular Key Lock Switches
SS-090
SS-095
Shunt On/Off
Momentary On/Shunt Off
Two Terminals, SPST
Two Terminals, SPST
Maintained OFF, springs
back from ON, key removable
from OFF position only.
Commonly used for
Maintained ON/OFF,
key removable from both
ON and OFF positions.
Commonly used as
momentary arm/disarm
alarm inputs or other
applications requiring
high-security momentary ON.
Replacement keys available.
See chart below.
ON/OFF switch to arm/
disarm alarm or shunt zone.
Replacement keys available.
See chart below.
OFF (N O )
OFF (N O )
ON (N C )
ON (N C )
SS-090-1
SS-092-2
Shunt On/Off
Shunt On/Off, Off/On
Four Terminals, Dual SPST
Two Terminals, SPST
Maintained ON/OFF,
Two switches, one always
ON while the other is OFF.
Connect terminals 1
& 2 for SPDT contact.
Use to arm/disarm
key removable from OFF position only.
Commonly used in situations which
require return of key to ensure device
is turned OFF.
Replacement keys available.
See chart below.
OFF (N O )
OFF (N O )
ON (N C )
ON (N C )
car alarms and
break starter circuit.
Replacement keys available.
See chart below.
Note: Please specify key number when ordering.
Please see below.
(Only below key #'s are available)
Keylock Model Number Chart
SS-090KN
SS-090
SS-095
SS-090-1
SS-092-2
SS-090KN
Key #
Spare Keys
SS 090 2H0 SS 095 1H0 SS 090 1H0 SS 092 2H0 SS 090KN 0 1300
SS 090 2H1 SS 095 1H1 SS 090 1H1
SS 090 2H2 SS 095 1H2
SS 090 2H3 SS 095 1H3
SS 090 2H4 SS 095 1H4
SS 090 2H5 SS 095 1H5
SS 090 2H6 SS 095 1H6
SS 090 2H7 SS 095 1H7
SS 090 2H8 SS 095 1H8
SS 090 2H9 SS 095 1H9
SS 090 2HX SS 095 1HX
SS 090KN 1 1301
SS 090KN 2 1302
SS 090KN 3 1303
SS 090KN 4 1304
SS 090KN 5 1305
SS 090KN 6 1306
SS 090KN 7 1307
SS 090KN 8 1308
SS 090KN 9 1309
SS 090KN X 1310
Replacement keys for the above
tubular key lock switches. Eleven
different key numbers available
(1300-1310).
See chart for information on which
key numbers are available for each
key lock and the correct key lock part
number for ordering.
Remote Plates
SS-199
SS-299
Stainless-steel slimline
Stainless-steel single-gang
plate with 3/4” D-hole.
plate with 3/4” D-hole.
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Control Power Supply
NEW
EAP-5D1Q One Output, 5A@12VDC (4.5A@24VDC)
Features:
AC power-failure supervision relay.
Battery-failure supervision relay.
Selectable 2.2 kOhm End-of-Line (EOL) resistor
for AC-failure and battery-failure supervision relays.
Selectable delay timer (5 seconds, 5 minutes,
5 hours) for AC-failure supervision relay.
LED overload indicator and automatic shutdown for
short-circuit protection.
Over-current fuse-protected AC input.
Built-in backup battery charger.
Automatically switch to backup battery if AC fails.
Individual AC input and DC output LED status
indicators.
(Batteries not included)
7
3
9
Dimensions: 12 /16"x12 /16"x3 /16"
(316x310x90 mm)
Power:
Field-selectable 12 or 24 VDC output.
Operating voltage input: 110~240 VAC.
Adjustable output voltage range (11~15 VDC,
23~26 VDC) to compensate for voltage drops.
Supply current: 5A@12VDC, 4.5A@24VDC.
AC input fuse rating 3.15 Amp (glass fuse).
DC output overload sensing with red LED indicator
and automatic shutdown during short circuit.
Accessory:
NEW
EAP-5D1MQ Power Supply Board
Same access control power
supply board as is used in
EAP-5D1Q above.
Enclosure:
Heavy-duty steel case to protect the power
connections.
Dimensions: 7"x43/4"x13/4"
(178x120x44 mm).
Removable steel cover for easy access.
Ventilation holes to prevent heat buildup.
Enclosure has enough room for two 7AH batteries.
6ft (1.8m) Power cord and battery leads included.
Dimensions: 127/16”x123/16”x39/16” (316x310x90 mm).
Knockout on the cover for optional cam lock.
Sample Application:
AC input LED
AC input fuse status indicator
DIP switch
for 12 or 24 VDC
output selection
110~240 VAC
Input
VR1 rotary knob
for DC output
voltage range
adjustment
Specifications
Battery failure & low battery
Supervision Relay Output to
Audio/Visual warning device
Output voltage
12 or 24 VDC selectable via DIP switch
110~240 VAC
Input voltage
Adjustable output
voltage range
11~15@12VDC setting, via VR switch
23~26@24VDC setting, via VR switch
AC failure
delay timer
DIP switch
Power Supply
# of outputs
1
Supply current
5A@12VDC/4.5A@24VDC
End-of Line
(EOL) 2.2 kOhm
resistor DIP switch
AC input fuse rating
LED status indicator
End-of-line resistor (EOL)
AC-failure relay delay timer
Supervision relays
3.15A (glass fuse)
Power Supply
AC input (Green), DC output (Red)
Selectable ON (2.2 kΩ) or OFF via DIP switch
Selectable 5s, 5min or 5h via DIP switch
Contact rating: 3A@24VDC dry relay output
AC failure Supervision
Relay Output to
Audio/Visual
DC output LED
status indicator
Battery presence
and low battery
monitor DIP switch
warning device
-
+
DC output
terminal block
Back-up
battery terminal
12 VDC Battery
(Optional)
1.949.261.2999 (CA & Int’l)
1.800.662.0800
Fax: 1.949.261.7326
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Door Phone
NEW
NEW
NEW
DP-121Q
Includes One Monitor and One Camera, Black and White
DP-121-SQ Additional Monitor
DP-121-CQ Additional Camera
SECO-LARM's Video Door Phone displays an
image of the visitor in real time on the phone's
monitor, and a built-in microphone and speaker on
the camera unit lets users communicate with visitors.
Authorized visitors can then be granted entry with
the push of a single button.
Interconnect up to two cameras and two monitors.
For home or business use.
Camera has six LEDs for nighttime operation.
Remotely and securely talk to visitors.
Remotely unlock doors, gates, etc. from the monitor.
Simple four-wire connection.
Easy surface-mount installation.
Camera and monitor turn on and off with the push
of a button.
Camera and monitor turn off automatically when
not in use.
Adjustable contrast, brightness, and ringer volume.
LED indicators for power and operation.
Camera contains a built-in angle adjustment.
Easily connect an additional monitor
and/or an additional camera
Secondary Monitor: DP-121-SQ
Additional Camera: DP-121-CQ
Sample Application:
Camera
B/W Camera
Specification:
Type
Primary Monitor
Secondary Monitor
(Optional DP-121-SQ)
Chip
CCD
380 TV lines
Resolution
Relay output
Lens
1A@12VDC max. dry contact
3.6mm
0.8 lux
Min. illumination
Weight
8 oz (220g)
51/4"x315/16"x11/2" (134x100x38 mm)
Dimensions
Specification:
Display
Monitor
CRT
Weight
2 lb 8 oz (1.1kg)
Current draw
Power source
Dimensions
800mA@15~18 VDC
15VDC+/ 15%
95/8"x711/16"x31/8" (245x196x79 mm)
Camera 1
Camera 2
(Optional DP-121-CQ)
Locking Device
(not included)
Locking Device
(not included)
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Stand-Alone Proximity Reader
NEW
PR-112S-A Tri-color LED Status Bar, Weatherproof, 100-User Capability
The stylish case and small size make the PR-112S-A
ideal for use in offices, homes, and apartments.
The wave-shaped tri-color LED status bar accents the
case design. Simple installation, quick programming,
and high reliability make the PR-1125-A ideal for any
situation.
Sealed and weatherproof (IP67).
Tri-color wave-shaped LED status bar indicates
proximity reader's mode and status:
• Blue
• Green Programming Mode
• Red Invalid Card
Output relay for either timed (1 to 180 seconds) or
"Toggle" mode.
On/Valid Card Indicator
Proximity
Card Reader
Proximity Card
(10 cards included)
Egress input for exiting the protected premises.
Buzzer for audible confirmation (programmable).
Up to 100 user cards can be programmed.
User cards easily deleted. Delete a single card,
or all cards.
Accessories:
PR-K1S1-A Proximity Cards
Additional user cards.
Sold in packages of 10.
Up to five "Master" cards can be programmed.
10 Cards included.
Additional cards available in standard
(model # PR-K1S1-A) or key-fob
(model # PR-K1K1-AQ) size.
PR-K1K1-AQ Key-Fob Proximity Tags
Additional user cards, key-fob style.
Sold in packages of 10.
PR-112S-A
12VDC
Specifications
Operating voltage
Dimensions:
Standby: 80mA@12VDC
Active: 200mA@12VDC
6" (15cm)
Current draw
5/8”
(16mm)
Max. read distance
User card limit
Master card limit
Transmit frequency
Output
100 Cards
19/16”
Front
5 Cards
33/4”
(40mm)
(95mm)
125 kHz
1 Relay (NO/NC/COM)
1A@30V
13
16
”
/
Contact rating
Relay time delay
Operating temp.
Enclosure rating
Dimensions
(21mm)
1~180 s or Toggle mode
4°~158° F ( 20°~70° C)
IP67
11
/16”
(17mm)
13/4” (44mm)
11
13
13
3
3
11
”
/16
”
/16
/16”
3 /4"x1 /4"x /16" (95x44x17 mm)
(17mm) (21mm) (21mm)
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Access Keypads
SK-1011-SQ One Output, 100 Users
SK-1131-SQ Three Outputs, 120 Users, Backlit Keypad
Shared Features:
Ideal for access and security applications.
Code lockout after multiple failed code entries.
Stainless-steel face, durable and attractive.
Built-in buzzer for audible confirmation.
Form C relay output (5A@28VDC).
Output relay activation buzzer.
Relay output inhibit control (programmable) –
Locks the relay output to prevent user access.
Auto or manual code-entry checking.
Egress input -- Lets users exit the protected premises
without keying in the code.
Built-in tamper (N.C.) circuit.
EEPROM memory -- Prevents data loss.
Power -- 12~24 VAC/VDC, no need to change jumpers.
SK-1011-SQ
SK-1131-SQ
Dimensions:
13/8
"
Additional Features for SK-1131-SQ:
27/8
(73mm)
"
(34mm)
Three outputs: Two relays, one transistor.
Backlit keypad: For easy daytime and nighttime use.
Mantrap: Ensures only one door can be opened at a time.
Duress output after multiple failed code entries.
Door-forced-open warning: Keypad beeps continuously
if the door to the protected premises is forced open.
Door-propped-open warning: Beeps continuously if the
door is open after the programmed open time elapses.
Alarm output: Can trigger an optional alarm control panel
if a protected door is forced open or propped open.
Keypad active output: Activates for 10 seconds when
any key on the keypad is pressed.
45/8
(117mm)
"
13/4
(44mm)
"
Model Comparison Chart:
SK-1011-SQ SK-1131-SQ
Door unlocked announcer
Request to exit input
Main relay lockout
Tamper switch
Yes
Yes
Yes
Yes
Door auto relock: Can relock an open door when
the relock time expires or after the door is closed.
Yes
Yes
Yes
Yes
Silent operation
Yes
Yes
Operating voltage
Number of outputs
Number of users
12~24 VAC/VDC
12~24 VAC/VDC
1
3
Specifications:
Operating voltage
SK-1011-SQ
SK-1131-SQ
100
120
12~24 VDC/VAC
Backlit keypad
No
Yes
Standby
10mA@12VDC
30mA@12VDC
80mA@12VDC
5A@28VDC
N/A
10mA@12VDC
30mA@12VDC
Mantrap
No
Yes
Current draw
Key pressed
Relay output
Relay #1
Door forced open warning
Door propped open warning
Key activation output
Door auto relock
Alarm output
No
Yes
130mA@12VDC (2 relays active)
5A@30VDC
No
Yes
No
Yes
Relay output
Relay #2
1A@28VDC
100mA@24VDC
No
Yes
Transistor ground output
Egress
N/A
No
No
Yes
Yes
N.O. ground
N.C. ground
Duress output
Door sensor input
Weight
Fixed internal
LED connections
External connection*
6 oz (180g)
7 oz (200g)
* LEDs can be wired to show status of external devices such as an alarm control panel.
1.949.261.2999 (CA & Int’l)
1.800.662.0800
Fax: 1.949.261.7326
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Outdoor Digital Access Keypads
NEW
SK-1123-SQ 110 Users, Two Relays, Surface Mount
SK-1123-FQ 110 Users, One Relay, One Transistor Ground O/P, Flush Mount
NEW
Each relay can be programmed for momentary
(1~999 seconds) or toggle operation.
Code flexibility: Each code can be 4~8 digits long.
Egress input for exiting the premises.
Dual voltage: 12~24 VAC/VDC operation.
Tamper switch: N.C. Dry contact 3A@12VDC.
Mantrap: For a protected area with two doors, this feature
allows only one door to be open at any time.
All features are programmed directly from the keypad,
eliminating the need for an external programmer.
Duress output: Signals a silent alarm if an authorized user
is forced to open the door under duress.
Door-forced-open and door-propped-open alarm output.
Keypad can be programmed to emit beeps for key
presses or operate in silent mode.
SK-1123-SQ
SK-1123-FQ
Dimensions:
31/8"
(78mm)
2"
(51mm)
Programmable backlight: Always ON, ON when keys
are pressed, Always OFF; suitable for solar applications.
Auto or manual code-entry checking:
– Auto: No # key required after each code.
– Manual: # Key must be pressed after every code.
Anti-Tailgate: Auto-relock to prevent tailgating.
415/16"
(125mm)
31/4"
(82mm)
45/8"
(118mm)
7
8
9
113/16"
(45mm)
Model Comparison Chart:
SK-1123-SQ SK-1123-FQ
110
2
110
2
Number of users
Number of outputs
Number of relays
2
1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Surface
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Flush
Backlit keys
Specifications:
Operating voltage
SK-1123-SQ
SK-1123-FQ
Tamper switch
12~24 VDC/VAC
Door unlocked annunciation
Request to exit input
Main relay lockout (inhibit)
Mantrap
Standby
15mA@12VDC
45mA@12VDC
10mA@12VDC
45mA@12VDC
100mA@12VDC
5A@30VDC
N/A
Current draw
Key pressed
Relay output
Relay #1
Relay #2
130mA@12VDC (2 relays)
5A@28VDC
Door forced open warning
Door propped open warning
Door auto relock
Relay output
1A@28VDC
Transistor ground output
Egress
N/A
100mA@24VDC
N.O. ground
N.C. ground
Alarm/duress output
Key activation output
Type of mounting
Door sensor input
Weight
22 oz (630g)
15 oz (430g)
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Vandal-Resistant Outdoor Keypad
NEW
SK-3123-SQ 101 Users, Two Outputs, Rugged Stainless-Steel, Illuminated
The ENFORCER SK-3123-SQ is rugged, vandal resistant,
and weatherproof, making it ideal for outdoor applications.
The keypad can be programmed to operate a fail-safe or
fail-secure locking device.
Over 100 million possible code combinations.
Code flexibility: Each code can be 2~8 digits long.
Dual voltage: 12~24 VDC/VAC operation.
Two Form C relays, each rated at 5A@24VDC.
Keypad active outputs.
Individual keys are backlit and entire keypad is
illuminated for easy nighttime use.
All features are programmed directly from the keypad:
No need for an external programmer.
Keypad can be programmed to emit beeps for key
presses or operate in silent mode.
Individual keys are backlit.
Entire keypad illuminated
for easy nighttime use.
EEPROM memory protects programmed information
in case of power loss.
Tamper switch: N.C. dry contact 3A@12VDC.
Egress input for exiting the protected premises.
Rugged stainless-steel construction.
Unique faceplate hinge allows
for easy installation.
Dimensions:
Specifications
SK-3123-SQ
@
30mA 12VDC
Standby
Keys lit
@
75mA 12VDC
Current draw
Relay active
@
125mA 12VDC
Number of outputs
Relay output
Additional outputs
Egress
2
63/8”
@
5A 24VDC, Form C, NO/NC/COM
Keypad active
(162mm)
N.O. ground
Inhibit input
Dimensions
Weight
N.O. ground
63/8”x51/4”x43/8” (162x133x111 mm)
51/4” (133mm)
43/8” (111mm)
4 Ib 7 oz (2.1kg)
1.949.261.2999 (CA & Int’l)
1.800.662.0800
Fax: 1.949.261.7326
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Mullion-Style Weatherproof Stand-Alone Keypads
NEW
NEW
SK-2323-SDQ 1,010 Users, Two Relay Outputs, Illuminated
SK-2323-SPQ 1,010 Users, Two Relay Outputs, Illuminated, Built-in Proximity Reader
ENFORCER Mullion-Style Weatherproof Stand-Alone
Keypads are rugged, vandal resistant, and weatherproof,
making them ideal for outdoor applications.
The SK-2323-SPQ also comes equipped with a built-in
proximity reader, allowing it to read proximity cards.
12~15 VDC operation.
Two relay outputs.
Backlit keys for easy nighttime use.
All features are programmed directly from the keypad –
No need for an external programmer.
Rugged aluminum construction.
Weatherproof for outdoor use.
3
Dimensions: 6”x1 /4”x1” (152x44x24 mm).
Additional user cards also available, model # PR-K1S1-A
or PR-K1K1-AQ. See page 35.
SK 2323 SPQ Shown
Sealed-Housing Stand-Alone Keypads
NEW
NEW
SK-1323-SDQ 1,010 Users, Two Relay Outputs, Illuminated
SK-1323-SPQ 1,010 Users, Two Relay Outputs, Illuminated, Built-in Proximity Reader
ENFORCER Sealed-Housing Stand-Alone Keypads are
contained in a sealed metal housing, making them suitable
for hazardous environments. The SK-1323-SPQ also comes
equipped with a built-in proximity reader, allowing it to read
proximity cards.
12~15 VDC operation.
Two relay outputs.
Backlit keys for easy nighttime use.
All features are programmed directly from the keypad –
No need for an external programmer.
Rugged stainless-steel construction.
Weatherproof for outdoor use.
3
7
Dimensions: 4 /4”x3”x /8” (120x76x22 mm).
Additional user cards also available, model # PR-K1S1-A or
PR-K1K1-AQ. See page 35.
SK 1323 SPQ Shown
Website: www.seco-larm.com
e-mail: sales@seco-larm.com
39
Download from Www.Somanuals.com. All Manuals Search And Download.
|
RCA Dishwasher PSD400 User Guide
Reebok Fitness Home Gym RBEL99062 User Guide
Renesas Computer Hardware H8 38099 User Guide
RIDGID Impact Driver R8823 User Guide
Runco Projector Vision 85 User Guide
Samsung Computer Monitor 173P Plus, 193P Plus User Guide
Samsung Digital Camera EC ST150FBPBUS User Guide
Samsung Telephone SPH I330 User Guide
Sanyo Flat Panel Television AVL224 User Guide
Sanyo Model Vehicle DS25520 User Guide