Owner’s Manual
RT-955
AM/FM Stereo Tuner
AM/FM STEREO TUNER RT-955
1
6
2
7
3
8
4
9
5
0
PTY
TA
TP
DOWN
UP
POWER
A
B
FM
RBPS RDS RT TP TA AF STEREO TUNED NARROW LOC AUTO MEMORY PRESET
REMOTE
SENSOR
ANT
ATT
DISPLAY
FM IF
AF
AM
AUTO TUNE/ PRESET
MEMORYTUNING PRESET SCAN
ANT
FM
BAND
A/B NARROW MONO
Download from Www.Somanuals.com. All Manuals Search And Download.
3
English
Figure 1: Controls and Connections
1
2
3
4
5
6
AM/FM STEREO TUNER RT-955
1
6
2
7
3
8
4
9
5
0
PTY
TA
TP
DOWN
UP
POWER
A RBPS RDS RT TP TA AF STEREO TUNED NARROW LOC AUTO MEMORY PRESET
B
FM
REMOTE
SENSOR
ANT
ATT
DISPLAY
FM IF
AF
AM
AUTO TUNE/ PRESET
MEMORYTUNING PRESET SCAN
FM
ANT
A/B
BAND
NARROW MONO
7
8
9
10 11 12 13
14 15 16 17 18
19
COMPUTER I/O
ANTENNA
AM
OUTPUTS
CAUTION
FM
AC INPUT
AM/FM STEREO TUNER
MODEL NO. RT-955
POWER CONSUMPTION: 10 W
A
B
G
LEFT
REMOTE
EXT
RIGHT
RT-955
IN
20
21
22
23
24
25
Figure 2: Hook-up Illustration
Download from Www.Somanuals.com. All Manuals Search And Download.
RT-955 AM/FM Stereo Tuner
4
Figure 3: RR-T91 Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
5
English
Contents
About Rotel
A family whose passionate interest in mu-
sic led them to manufacture high fidelity com-
ponents of uncompromising quality founded
Rotel over 30 years ago. Through the years
that passion has remained undiminished and
the family goal of providing exceptional value
for audiophiles and music lovers regardless
of their budget, is shared by all Rotel em-
ployees.
Figure 1: Controls and Connections
Figure 2: Hook-up Illustration
Figure 3: RR-T91 Remote Control
3
3
4
Basic Tuning Controls ..............................7
BAND Button
8
8
TUNING Controls
About Rotel ...........................................5
Getting Started ......................................5
NUMERIC Buttons:
Station Presets
8
FREQUENCY DIRECT Button:
Direct Access Tuning
The engineers work as a close team, listen-
ing to, and fine tuning each new product
until it reaches their exacting musical stan-
dards. They are free to choose components
from around the world in order to make that
product the best they can. You are likely to
find capacitors from the United Kingdom and
Germany, semi conductors from Japan or
the United States, while toroidal power trans-
formers are manufactured in Rotel’s own
factory.
8
9
9
9
RT-955 Key Features
Unpacking
6
6
6
AUTO TUNING Button
TUNE/PRESET Button
PRESET SCAN Button
Placement
Rear Panel Connections ..........................6
RDS and RBDS Broadcast Reception ........9
RCA Outputs
6
6
6
6
7
7
DISPLAY Button
PTY Button
TP Button
9
10
10
10
10
AM Loop Antenna
FM Antenna
Rotel’s reputation for excellence has been
earned through hundreds of good reviews
and awards from the most respected review-
ers in the industry, who listen to music ev-
ery day. Their comments keep the company
true to its goal - the pursuit of equipment that
is musical, reliable and affordable.
AC Input
TA Button
REMOTE EXT IN Jack
COMPUTER I/O Interface
AF Button
Additional Tuning Features ....................10
Basic Operating Controls.........................7
All of us at Rotel, thank you for buying this
product and hope it will bring you many hours
of enjoyment.
FM MONO Button
ANT ATT Button
10
10
11
11
Power Button
7
7
7
7
7
7
Remote Sensor
FM IF NARROW Button
ANT A/B Button
Getting Started
Front Panel Display
DIMMER Button
MEMORY Button
Setting Country Mode
Thank you for purchasing the Rotel RT-955
AM/FM Stereo Tuner. Rotel’s Balanced
Design Concept combines advanced circuit
board layout, comprehensive parts evalua-
tion, and extensive listening tests for supe-
rior sound and long term reliability. The RT-
955 will provide years of listening enjoy-
ment.
Specifications .......................................11
FM Tuner
AM Tuner
General
11
11
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RT-955 AM/FM Stereo Tuner
6
RT-955 Key Features
FM Antenna
Rear Panel Connections
The RT-955 provides rear panel connections
for audio line level output, two FM anten-
nas, an AM antenna, DB-9 computer inter-
face, a remote IR sensor connection, and
AC power input.
• AM and FM tuning capabilities
• User-friendly Fluorescent Display
The RT-955 has two FM antenna connections,
labeled A and B. This permits you to switch
between two different FM antenna systems
using a front panel or remote control switch.
This feature could be useful to switch between
an indoor antenna and an outdoor antenna
system or between a standard FM antenna
and a cable or satellite TV decoder that
provides an FM antenna signal.
• 30 Station Presets for memorizing your
favorite stations
• Manual frequency and preset tuning, auto-
search tuning, preset scanning, and fre-
quency direct tuning.
NOTE: Do not plug any system component
into an AC source until system hookup is
complete and you are confident that all com-
ponent-to-component connections have
been properly made.
• RDS (Radio Data System) capability for
Europe and RBDS (Radio Broadcast Data
Service) capability for the USA.
NOTE: The following instructions assume the
use of a standard FM wire antenna sup-
plied with the unit. To hook up a cable or
satellite TV FM antenna system, see the in-
structions supplied with that unit.
• Dual selectable FM antenna inputs
• Stereo/mono switching, selectable local/
distance antenna attenuation, selectable
narrow/wide IF band.
RCA Outputs
A pair of line level RCA audio outputs sends
a fixed-level stereo signal from the RT-955
to your preamplifier, system controller, or
integrated amplifier. Use a standard RCA
audio cable to connect the LEFT OUTPUT jack
to the left channel tuner input on your sys-
tem controller and the RIGHT OUTPUT jack
to the right channel tuner input on your sys-
tem controller.
The RT-955 is supplied with a T-
shaped indoor FM antenna. Remove
this antenna from the box and connect its
attached coax F-type plug to one of the the
FM antenna connectors on the RT-955. For
best reception, unfold the T-shaped antenna.
Eyelets at both ends of the T allow tacking
the antenna to a wall, if desired. Experiment
with positioning for best reception.
• Full-function wireless remote control
Unpacking
Remove the unit from its packing. Look for
the handheld remote control and other ac-
cessories. Install the supplied batteries in the
remote control. Save the packing and box
as it will protect the RT-955 if you move or
need to return it for maintenance.
AM Loop Antenna
NOTE: To use an outdoor antenna, connect
its 75 ohm coax lead wire to the FM con-
nector in place of the indoor wire antenna,
only after a professional contractor has in-
stalled the antenna system in accordance
with local electrical codes. In the USA, you
will need to use the supplied F-type con-
verter to connect the 75 ohm coax cable to
the antenna input.
Placement
The RT-955 includes a loop antenna to re-
ceive AM radio signals. Remove this antenna
from the box and locate it near the RT-955.
Place the RT-955 on a solid, dry, level sur-
face away from direct sunlight, excessive
heat, high humidity, or strong vibrations.
Connect the 300 ohm twin-conductor wire
from the loop antenna to the pair of screw
terminals labeled AM LOOP, attaching one
wire to each terminal. It does not matter which
wire attaches to which terminal, but make
sure that the connections are solid and that
the two wires do not touch.
The RT-955 can generate some heat during
normal operation. If installed in a cabinet,
make sure that there is adequate ventilation.
Make sure there is enough room behind the
RT-955 for easy hookup. Place the unit close
to the other components in your audio/video
system and, if possible, place it on its own
shelf. This will make initial cable routing,
hookup, and any subsequent system changes
easier. It also minimizes potential interfer-
ence or heat buildup from other components.
AC Input
You may need to rotate or otherwise reori-
ent the antenna to find the best position.
Your RT-955 is configured at the factory for
the proper AC line voltage in the country
where you purchased it (120 volts AC at
60Hz in the USA and 230 volts AC at 50Hz
in Europe). The AC line configuration is noted
on a decal on the back of your unit. Make
sure that your unit is configured properly for
your AC line voltage.
NOTE: To use an outdoor antenna, connect
its 300 ohm twin-conductor wire to the G
and AM terminals in place of the loop an-
tenna, only after a professional contractor
has installed the antenna system in accor-
dance with local electrical codes.
Don’t stack heavy objects on top of the
RT-955. Do not expose the unit to moisture
as this could damage delicate circuitry and
result in a safety hazard.
Plug the supplied cord into the AC INPUT
receptacle on the back of the unit. Once all
other rear panel connections are completed,
plug the power cord into an AC wall outlet
or switched AC outlet on another system
component.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
English
including FM tuning intervals, AM tuning
intervals, and differences in the European
RDS and United States RBDS standards. Your
unit has been factory configured to the cor-
rect default mode for the country in which
it was purchased.
REMOTE EXT IN Jack
Power Button
This 3.5mm mini-jack receives command
codes from industry-standard infrared receiv-
ers (Xantech, etc.) via hard-wired connec-
tions. This feature could prove useful when
the unit is installed in a cabinet and the front-
panel sensor is blocked. Consult your au-
thorized Rotel dealer for information on these
external repeaters and the proper wiring of
a jack to fit the mini-jack receptacle.
The POWER button is located on the front
panel of the RT-955 and is not duplicated
on the remote control.
Push the button IN to turn the unit on. The
LED above the switch and the front panel
display will light up. Push the button again
(returning it to the OUT position), to turn the
unit off.
To switch to the USA default mode,
press and hold the POWER, MEMORY, and
9 buttons for 5 seconds. The word LOAD-
ING will appear in the DISPLAY and the unit
will power up in the USA configuration.
NOTE: If you are using a switched outlet on
another component to power the RT-955,
you should leave the POWER switch in the
ON position. The RT-955 will be switched
on and off by the other component’s
switched outlet.
To switch to the European default
mode, press and hold the POWER,
MEMORY, and 0 buttons for more than 5
seconds. The word LOADING will appear
in the DISPLAY and the unit will power up
in the European configuration.
COMPUTER I/O Interface
This RS-232 serial computer interface con-
nection allows you to operate the unit from
a stand-alone home automation controller
or from a PC computer running special soft-
ware. Consult your authorized Rotel dealer
for information on these systems and the
proper interface with your RT-955’s DB9 serial
connector.
Remote Sensor
Basic Tuning Controls
This front panel sensor receives infrared sig-
nals from the remote control. Make sure you
do not accidentally block this sensor with
cables or accessories.
The RT-955 features a digital synthesized
AM/FM tuner with RDS or RBDS capability
and 30 station presets. The unit offers a wide
range of tuning options. Here is an overview
of the tuning options (more detailed infor-
mation is provided in subsequent sections
of this manual):
NOTE: Information on commercial software
for using your personal computer to oper-
ate audio/video components, including the
RT-955, can be found at the Rotel website:
www.rotel.com/downloads/
Front Panel Display
The large fluorescent display in the center
portion of the RT-955 provides status infor-
mation used in operating the AM/FM re-
ceiver (such as station frequency display,
band, preset memory, RDS information, etc.).
• Manual frequency tuning lets you
tune up or down to the next station fre-
quency. Set the TUNE/PRESET mode to
TUNE. Turn off AUTO TUNING. Use the
TUNING controls to tune up or down.
Basic Operating Controls
The following explanations will help you get
familiar with the features, and controls.
Number references corresponding to the il-
lustrations at the front of this manual.
DIMMER Button
• Direct frequency tuning lets you enter
the desired station frequency digits. Press
the FREQUENCY DIRECT button on the
remote and enter the digits using the
NUMERIC buttons.
Available only on the remote control, this
button temporarily reduces the brightness of
the front panel DISPLAY. Press the button to
toggle between the normal brightness and
reduced brightness. When the tuner is turned
off, the DISPLAY will revert to its normal
setting.
Most functions are duplicated on the front
panel and on the handheld remote control
shipped with your unit. When two reference
numbers appear, one refers to the location
of the control on the front panel, the other
refers to the location of the corresponding
control on the handheld remote. When only
one number is shown, that control is avail-
able only on the front panel or the remote,
as noted in the text.
• Automatic frequency search tun-
ing lets you search up or down to find
the next receivable broadcast signal. Set
the TUNE/PRESET mode to TUNE. Turn
on AUTO TUNING. Use the TUNING con-
trols to search up or down.
MEMORY Button
The MEMORY button is used to confirm and
memorize various settings in the setup and
operation of the RT-955, including tuner sta-
tion presets. Its use is described in detail in
the relevant sections below.
• Memory station preset tuning lets
you directly enter the number of a memo-
rized station preset number. Enter the
number of the memorized preset using
the NUMERIC buttons.
NOTE: Controls used for tuning the AM/FM
receiver are described in the next sections
of this manual.
Setting Country Mode
• Preset scan tuning lets you scan up/
down through the memorized station
presets. Press the PRESET SCAN button
to begin scanning.
The RT-955 has two default modes, one for
the USA and one for Europe. These config-
ure the unit for differences in local markets,
Download from Www.Somanuals.com. All Manuals Search And Download.
RT-955 AM/FM Stereo Tuner
8
• RDS (Europe) or RBDS (USA) tun-
ing provides a range of special tuning
and search features based on data codes
encoded with the broadcast signal. See
the RDS section of this manual for detailed
information.
the TUNE/PRESET button and AUTO TUN-
ING button sections for details on chang-
ing the tuning modes.]
To tune to a previously memorized
station preset from 1 through 29,
press the preset number using the
NUMERIC buttons. For example, to tune
to preset 3, press the 3 button. To tune to
preset 15, press the 1 button and then press
the 5 button within 5 seconds.
In the PRESET TUNING mode, press a
TUNING button to advance to the next memo-
rized station preset. [See the TUNE/PRESET
button section for details on changing the
tuning modes.]
BAND Button
To tune to preset 30, press the num-
ber 0.
The BAND button selects whether the tuner
will receive AM or FM broadcast signals.
Press the button to toggle back and forth
between AM and FM. A corresponding in-
dicator will light at the left portion of the front
panel DISPLAY to confirm your choice. The
currently tuned station frequency will be
shown.
In the RDS PTY search mode, press a
TUNING button to select the desired pro-
gram type from the scrolling list in the dis-
play. See the section on RDS tuning for more
details. [See the RDS PTY button section for
details.]
When a station preset is selected, the pre-
set number appears in the DISPLAY to the
right of the station frequency.
NOTE: The NUMERIC buttons can also be
used for FREQUENCY DIRECT tuning.
NOTE: Several indicators in the front panel
display assist tuning.Alarge display shows
the tuned frequency and increases or de-
creases during tuning. A signal strength in-
dicator shows the strength of the incoming
signal. A TUNED indicator lights when a
sufficiently strong signal is received. A ST
indicator lights when a stereo FM signal is
received. In addition, indicators show the
currently selected tuning mode.
FREQUENCY DIRECT Button:
Direct Access Tuning
TUNING Controls
A large rotary control on the front panel and
a corresponding pair of buttons on the re-
mote serve as the main tuning controls for
the RT-955.
If you know the exact frequency of the de-
sired station, you may tune it directly using
the FREQUENCY DIRECT button (remote only)
and the NUMERIC buttons.
Front Panel: Use the large rotary TUNING
knob. Turn clockwise to tune up or counter-
clockwise to tune down.
1. Press the FREQUENCY DIRECT button to
change the NUMERIC buttons from sta-
tion preset to direct access mode. The
station frequency in the front panel dis-
play will change to a series of bars, rep-
resenting the digits of a station frequency,
with the first bar blinking.
Remote Control: Use the pair of buttons
in the lower right corner of the remote con-
trol keypad labeled < TUNE / PRESET >.
Press the right button to tune up and the left
button to tune down.
NUMERIC Buttons:
Station Presets
The RT-955 can store up to 30 station pre-
sets for recall at any time using the NUMERIC
keypad. These station presets can be used
for any combination of AM stations and FM
stations.
2. Enter the first digit of the station frequency
using the NUMERIC buttons. The digit will
appear in the frequency display and the
next bar will flash. Enter the remaining
digits of the frequency. When all of the
digits have been entered, the tuner will
automatically tune to the displayed sta-
tion frequency.
These controls provides several different
tuning functions, depending on the mode of
operation:
The RT-955 is delivered from the factory with
a set of generic station presets that may or
may not match any available stations in your
area. To memorize a new station preset:
In the FREQUENCY TUNING mode
with AUTO TUNING off, press a TUN-
ING button to manually jump to the next
frequency, regardless of whether or not a
station is broadcasting on that frequency.
[See the TUNE/PRESET button and AUTO
TUNING button sections for details on chang-
ing the tuning modes.]
1. Tune to the desired station, AM or FM.
NOTE: On the USA version only, pressing
1 in the FM mode will enter 10 as the
digit in the frequency display. On the Eu-
ropean version, it is necessary to press 1
and then 0 to enter 10. For US FM sta-
tions, press only one digit following the
decimal point as shown in the first ex-
ample following. For European FM sta-
tions, press two digits after the decimal
point as shown in the second example.
2. Press the MEMORY button on the front
panel. A MEMORY indicator will flash
in the front panel display.
In the FREQUENCY TUNING mode
with AUTO TUNING on,, press a TUN-
ING button to start auto tuning. The tuner
begins automatically scanning up or down
through the frequencies until the next receiv-
able signal is detected. If this is not the desired
station, repeat the automatic tuning proce-
dure to find the next station. Weak stations
will be skipped during auto tuning. If no
receivable signal is detected, the tuner will
revert to the last previously tuned station. [See
3. While the MEMORY indicator is flashing,
press the number of the preset where you
wish to store the station frequency. For
example, to memorize the station as
preset 3, press the 3 button. To memo-
rize preset 15, press the 1 button followed
by the 5 button.
4. A previously stored frequency is erased
from memory when a new frequency is
memorized for the same preset number.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
English
EXAMPLES:
RDS broadcasting has been widely available
in many European markets for years. There
are a large number of RDS stations and most
users will be familiar with the features and
operation. In the USA, implementation of the
RBDS system is more recent. Fewer stations
are currently broadcasting RBDS signals and
the features may be less familiar to many
users. Consult your authorized Rotel dealer
for more information on RDS or RBDS broad-
casting in your market.
PRESET SCAN Button
(USA FM) 87.50MHz
(Europe FM) 87.50MHz Press 8>7>5>0
(all AM) 1610kHz Press 1>6>1>0
Press 8>7>5
This button activates a preset scanning fea-
ture. When you press the button, the tuner
will automatically scan through all memo-
rized station presets, playing each for five
seconds before moving to the next. To stop
the station scanning on the desired station
preset, press the button again.
If no frequency is entered within 5 sec-
onds, the tuner will cancel FREQUENCY
DIRECT tuning mode and revert to the last
previously tuned station.
AUTO TUNING Button
NOTE: If a PRESET station is currently tuned
when the PRESET SCAN button is pressed,
scanning will start with the next higher pre-
set number and continue through all preset
stations, stopping on the initial preset. If a
PRESET station is not currently tuned when
the button is pressed, scanning will start
from PRESET 1 and continue to PRESET 30.
The AUTO TUNING button toggles between
the frequency search tuning feature and
manual frequency tuning. When using the
TUNING controls on the front panel or re-
mote in AUTO TUNING mode, the tuner will
begin automatically scanning up or down
through the frequencies until the next receiv-
able broadcast signal is detected. If this is
not the desired station, use the TUNING
controls again to find the next station. Weak
stations will be skipped during auto tuning.
If no receivable signal is detected, the tuner
will revert to the previously tuned station.
NOTE: The RDS and RBDS features are en-
tirely dependent on the broadcaster send-
ing properly encoded signals. Thus, they
will only be available in markets where RDS
or RBDS is currently implemented and where
stations are broadcasting these data sig-
nals. If there are no RDS or RBDS stations,
the RT-955 will function as a standard ra-
dio receiver.
RDS and RBDS Broadcast
Reception
The Rotel RT-955 is equipped with RDS (Ra-
dio Data Systems) reception capabilities for
Europe and RBDS (Radio Broadcast Data
Service) capabilities for the United States.
These broadcast systems provide additional
functionality to FM radio reception by trans-
mitting encoded information along with the
radio signal. This signal is decoded by an
RDS or RBDS receiver and can provide a
range of informational features including:
NOTE: RDS and RBDS services are only avail-
able on FM broadcasts. The features and
buttons described below are only opera-
tional in FM mode.
To toggle between FREQUENCY TUNING
mode and AUTO TUNING mode, press the
AUTO TUNING button. An AUTO indica-
tor will appear in the display.
DISPLAY Button
There are five display options when the
currently tuned station is broadcasting RDS
information and the RDS indicator in the front
panel display is lit. Press the DISPLAY but-
ton to step sequentially through the five avail-
able display options:
NOTE: AUTO TUNING mode is disengaged
when the TUNE/PRESET button is set to
PRESET tuning mode. See the following sec-
tion.
1. a display of the station’s identifying name
(e.g. BBC1)
TUNE/PRESET Button
1. Standard FREQUENCY display.
2. a display of the station’s program con-
tent (e.g. ROCK or NEWS)
The TUNE/PRESET button toggles between
FREQUENCY TUNING mode (the TUNING
controls advance to the next station fre-
quency) and PRESET TUNING mode (the
TUNING controls advance to the next memo-
rized station preset). To toggle between the
two modes, press the TUNE/PRESET button.
A PRESET indicator in the front panel DIS-
PLAY will light when the PRESET mode is ac-
tive.
2. PROGRAM SERVICE name. This is typi-
cally the station’s call letters, such as
BBC1). If the current station is not broad-
casting an RDS signal, the display will
show a blinking PS indication.
3. traffic information broadcasts
4. a scrolling text display for announcements
or information
3. PROGRAM TYPE. This is a description of
the station’s content from a standardized
list of program types in each market (for
example: NEWS, CURRENT AFFAIRS,
INFO, SPORT, EDUCATION, DRAMA,
CULTURE, SCIENCE, VARIED, POP,
ROCK, EASY LISTENING, LIGHT CLAS-
SICAL, SERIOUS CLASSICAL, OTHER
MUSIC, WEATHER, FINANCE, CHIL-
DREN, SOCIAL AFFAIRS, RELIGION,
PHONE IN, TRAVEL, LEISURE, JAZZ,
COUNTRY, NATIONAL MUSIC, OLDIES,
FOLK, and DOCUMENTARY). If the cur-
In addition, RDS provides several advanced
search features including:
1. the ability to search for a station with the
desired program content (PTY)
2. the ability to search for traffic informa-
tion (TP)
NOTE: AUTO TUNING mode is disengaged
when the TUNE/PRESET button is set to
PRESET tuning mode.
3. the ability to automatically search stations
broadcasting special traffic announce-
ments (TA).
Download from Www.Somanuals.com. All Manuals Search And Download.
RT-955 AM/FM Stereo Tuner
10
rent station is not broadcasting an RDS
signal, the display will show a blinking
PT indication.
TA Button
Additional Tuning Features
The following buttons provide features which
may be used to improve FM reception and/
or provide additional functionality:
Searches for an RDS station broadcasting
special traffic announcements:
4. CLOCK TIME. A time and date display
broadcast by the station. If the current
station is not broadcasting an RDS sig-
nal, the display will show a blinking CT
indication.
1. Press the TA button. The tuner will attempt
to find an RDS station broadcasting traffic
announcements.
FM MONO Button
2. If no station is located, the tuner will return
to the last previously tuned station.
The FM MONO button changes the FM mode
from stereo reception to mono reception. In
stereo mode, a stereo signal will be heard
if the station is broadcasting a stereo sig-
nal and there is sufficient signal strength. A
stereo indicator will light in the front panel
display. In mono mode, a mono signal will
be heard even if the station is broadcasting
a stereo signal.
5. RADIO TEXT. Additional scrolling text
messages broadcast by the station. If the
current station is not broadcasting an RDS
signal, the display will show a blinking
RT indication.
3. Cancel the TA function by pressing any
button (except DIMMER or FM MONO).
AF Button
PTY Button
In some cases, an RDS station is part of a
network of stations broadcasting the same
programming (for example, BBC1 program-
ming in the UK may be available at several
different frequencies). Stations broadcasting
this programming may transmit an RDS data
signal providing the tuner with a list of al-
ternate frequencies where this programming
is available. If this data list is transmitted,
an AF indicator will appear in the DISPLAY.
The PTY search function permits you to scan
available signals for RDS stations broadcast-
ing a particular type of program content.
NOTE: Switching to mono mode can be a
useful way to improve the reception of weak
or distant FM signals. Less signal strength
is required for clean mono reception than
for stereo reception.
1. Press the PTY button. The current RDS
program content type will appear in the
display.
2. If desired, change to a different PRO-
GRAM TYPE using the TUNING controls
to scroll through the list.
ANT ATT Button
The AF button is used to scan the alternate
frequencies to find a stronger signal. The
button is only functional when the AF indi-
cator is lit.
3. Press the PTY button a second time within
5 seconds. The tuner will attempt to find
an RDS station broadcasting the selected
type of program. If the button is not
pressed within 5 seconds after selecting
a program type, the PTY function will be
cancelled.
Commonly known as a LOC/DISTANCE
switch, the ANT/ATT button reduces the sig-
nal level at the FM antenna input. For the
best reception of stations located some dis-
tance away, this button should be in the
default or OFF position. However, if you are
located in an urban area very close to the
radio transmitter, the incoming signal may
be high enough to overload the FM inputs.
Press this button to reduce the incoming sig-
nal. When activated, a LOC indicator will
appear in the DISPLAY. Press the button again
to toggle back to normal operation. This
switch only effects FM reception.
1. Press the AF button. The tuner will scan
each of the alternate frequencies for the
same programming in the stored list and
tune to the strongest signal.
4. If no station is located for the desired
content type, the tuner will return to the
last previously tuned station.
2. If no station is located, the tuner will return
to the last previously tuned station.
3. If the signal strength of the new station
is weaker, the tuner will revert to the
previously tuned station.
5. Cancel the PTY function by pressing any
button (except DIMMER or FM MONO).
4. Cancel the AF function by pressing any
button (except DIMMER or FM MONO).
TP Button
Searches for an RDS station broadcasting
traffic information programming:
1. Press the TP button. The tuner will attempt
to find an RDS station broadcasting the
traffic programming.
2. If no station is located, the tuner will return
to the last previously tuned station.
3. Cancel the TP function by pressing any
button (except DIMMER or FM MONO).
Download from Www.Somanuals.com. All Manuals Search And Download.
11
English
FM IF NARROW Button
Specifications
FM reception works by receiving and de-
coding a carrier signal centered at the tuned
frequency. To accommodate broadcast sta-
tions that may be slightly misadjusted off this
carrier frequency, the receiver accepts sig-
nals slightly to either side of the tuned fre-
quency. This provides satisfactory perfor-
mance in most reception areas.
FM Tuner
Usable Sensitivity:
12.2 dBf
50dB Quieting Sensitivity:
20.2 dBf (mono)
45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf):
Harmonic Distortion (at 65 dBf):
75 dBf (mono)
72 dBf (stereo)
0.2% (mono)
0.3% (stereo)
If you are located in an urban area with a
large number of stations with closely spaced
frequencies, you may occasionally notice
interference from adjacent stations. To pro-
vide better performance under these condi-
tions, the RT-955 allows you to reduce the
range of frequencies to either side of the
precise tuned frequency, thus reducing in-
ter-station interference. Press the FM IF
NARROW button to use this feature. A
NARROW indication will appear in the
DISPLAY. Press the button again to toggle back
to normal operation.
Frequency Response:
Capture Ratio:
10 Hz-15 kHz, 3 dB
2.0 dB
Alternate Channel Selectivity:
Spurious Response Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
47 dB ( 400 kHz)
90 dB
80 dB
80 dB
AM Suppression Ratio:
Stereo Separation (100Hz/1 kHz/10 kHz):
Output level:
55 dB
40 dB/45 dB/35 dB
1.2V
Antenna Input:
75 ohms unbalanced
AM Tuner
Usable Sensitivity:
Selectivity:
300 µV/m
25 dB
ANT A/B Button
Harmonic Distortion:
Image Rejection Ratio:
Signal to Noise Ratio:
Output level:
0.5%
45 dB
As described in the REAR PANEL CONNEC-
TIONS section of this manual, the RT-955
provides two FM antenna connections, la-
beled A and B. This button toggles between
the two antenna inputs. An A or B indica-
tor will appear in the DISPLAY, indicating
which FM antenna input is currently active.
48 dB
165 mV
Loop Antenna
Antenna Input:
General
Power Consumption:
10 watts
Power Requirements (AC):
120 volts, 60 Hz (USA version)
230 volts, 50 Hz (European version)
Weight:
3.7 Kg/8.2 lb.
Dimensions (W x H x D):
440 x 72 x 286 mm
173/8" x 27/8" x 111/4"
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku
Tokyo 150-0045
Japan
Phone: +81 3-5458-5325
Fax: +81 3-5458-5310
Rotel of America
54 Concord Street
North Reading, MA 01864-2699
USA
Phone: +1 978-664-3820
Fax: +1 978-664-4109
Rotel Europe
Meadow Road
Worthing, West Sussex BN11 2RX
England
Phone: +44 (0)1903 524 813
Fax: +44 (0)1903 524 831
Rotel Deutschland
Kleine Heide 12
D-33790 Halle/Westf.
Germany
Phone: +49 05201-87170
Fax: +49 05201-73370
082 OMRT-955ENG 051099
Download from Www.Somanuals.com. All Manuals Search And Download.
|