USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive
With Power Adapter
RCW604
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604
User Manual
Package Contents
RCW-604 X ꢀ
User manual X ꢀ
Power adapter X ꢀ
Installation
ꢀ. Plug the 2.5” or 3.5” ATA/ATAPI device to RCW-604
(Please notice the direction of IDE port)
(only available in RCW605)
SATA
3.5"
5.25"
2.5"
3.5" HD
2.5" HD
ATAPI device
2
Download from Www.Somanuals.com. All Manuals Search And Download.
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604
User Manual
2. Connect the power adapter set.
3. Plug the 4 pin power adapter to your ATA/ATAPI device
(There is no additional power needed for 2.5” HD)
4. Plug the power adapter to power source and turn on the power .
(Please make sure the voltage is between ꢀ00~240V)
5. Plug the USB2.0 cable to PC and wait for PC auto-detection.
Driver is needed only in old system such as Windows 98.
Please inset the driver disk when your system can’t complete
the installation process. Windows will auto-install after it detects
the driver disk and choose the most suitable driver for your system.
(Please notice the direction of USB port)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604
User Manual
Notification
ꢀ. RCW-604 can only support one ATA/ATAPI device of 2.5” or 3.5” one time. This means that if
you connect a 2.5” HD to 2.5” port, 3.5” port will be no function during the operation of 2.5”
HD.
2. There is no different between the jumper setting of “Master” or “Slave” on your ATA/ATAPI
device working with RCW-604.
3. Please take off the ATA/ATAPI device from RCW-604 only after you turn off the power to avoid
any damage.
4. If you plug RCW-604 and HD to PC, PC might freeze during the beginning of booting. In this
case, you may unplug RCW-604 at the start of booting and re-plug it after PC enters windows.
5. If PC can’t detect RCW-604 and HD in windows, please try the following. Unplug RCW-604
nd try to reboot the PC. Re-plug it after system enters windows. If all above still can’t help, it
might be caused by the incompatibility between HD, system or controller chipset.
Please contact us for more support.
Thank you for purchasing a quality Rosewill Product.
for complete warranty information and future support for your product.
If you have any question while using our products, please feel free to contact us at
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|