Radio Shack Laser Level 63 1058 User Guide

Your laser level requires two AAA batteries (not supplied). Batteries are available at your local RadioShack store or  
• Keep the laser level dry. If it gets wet, wipe it dry  
immediately.  
• Use and store the laser level only in normal  
temperature environments. Handle the laser level  
away from dust and dirt, and wipe it with a damp  
cloth occasionally to keep it looking new.  
• Modifying or tampering with the laser level’s internal  
components can cause a malfunction and might  
invalidate its warranty.  
• If your laser level is not performing as it should, take  
it to your local RadioShack store for assistance.  
63-1058  
battery notes  
1. Remove the battery  
• When the laser beam dims, or stops operating  
laser level  
cover by turning  
properly, replace the batteries.  
counter-clockwise.  
Replace when finished.  
• Dispose of old batteries promptly and properly. Do  
not burn or bury them.  
Your RadioShack Laser Level is a high quality laser  
2. Arrange the batteries  
in the compartment  
as indicated by the  
polarity symbols (+  
and -) on the laser  
level body.  
level incorporating advanced laser optics and  
• Use only fresh batteries of the required size and  
recommended type. Do not mix batteries of different  
types, capacities, or chemistries.  
microelectronics. The machined aluminum body of the  
laser level is equipped with two high quality bubbles,  
one horizontal and one vertical. Every laser level must  
pass a critical vibration test before leaving the factory.  
This test assures the accuracy of the laser within 0.2  
inches (5.08mm) at a distance of 30 feet (9.1m).  
• If you do not use your laser pointer for several days,  
remove the batteries. Batteries can leak chemicals  
that may destroy electronic parts.  
tips  
vertical  
bubble  
horizontal  
bubble  
1. Make sure that the laser level itself is level before  
you work from the laser beam reference point. To do  
this, place the laser level on your reference surface.  
2. You can use the laser level on a tripod with the hole  
on the bottom of the level.  
ON/OFF  
switch and  
battery  
cover  
using your laser pointer  
dot  
1. Press the ON/OFF button on the battery cover to turn  
the laser level on.  
lens: slide  
up/down  
to project  
line/dot  
2. Place the laser level on the reference object with the  
base touching.  
3. Aim at the object you want to measure.  
Slide the lens toward the line (—) to project a laser  
LINE.  
When the vertical or the horizontal bubble is between  
the two black lines and the laser level itself is level,  
the projected line or dot is either vertical or horizontal.  
line  
4. Slide the lens toward the dot () to project a laser  
DOT.  
Thank you for purchasing your laser level from  
RadioShack.  
This product is warranted by RadioShack against manufacturing defects in material  
and workmanship under normal use for one (1) year from the date of purchase from  
RadioShack company-owned stores and authorized RadioShack franchisees and dealers.  
For complete warranty details and exclusions, check with your local RadioShack store.  
important safety precautions  
Warning! Never point the laser at anyone.  
Warning! Follow the instructions on the danger label.  
Warning! Never look directly into the laser beam.  
Warning! Keep laser pointer away from children.  
RadioShack Customer Relations  
200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
04/04  
Laser Level  
User’s Guide  
Warning! Use of controls or adjustments, or the  
performance of procedures other than specified  
herein, can result in hazardous radiation exposure.  
Warning! Laser light, when reflected by a mirror-like  
surface, can also be dangereous.  
Actual product may vary from the images  
product specifications  
NOTE  
found in this document.  
Laser Type ........................................................................ IndexGuided  
Wavelength .........................................650 10nm (Class IIIA Product)  
Output Power.............................................................................<5mW  
Operation Range................................................................... >600 feet  
Battery LIfe...................................................................25 hrs (alkaline)  
Beam type................................................................. Dot or Horizontal  
Material ................................................................................ Aluminum  
Specifications are subject to change and improvement without notice.  
Individual units may vary.  
©2004. RadioShack Corporation.  
Please read this user’s guide before  
63-1058  
06A04  
All rights reserved. RadioShack and  
RadioShack.com are trademarks  
used by RadioShack Corporation.  
installing, setting up and using your new product  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Cordless Telephone 43 5560 User Guide
Rheem Water Heater 136 1826 User Guide
RocketFish Mouse RF ALPME User Guide
ROUTE 66 GPS Receiver Mobile 7 User Guide
Ryobi Edger RY13050 User Guide
Samsung Home Theater System AH68 01943R User Guide
Sanus Systems Indoor Furnishings CFR115 User Guide
Sanyo Car Speaker KH2442 CH2442 User Guide
Savin Printer 3460DNP User Guide
SECO LARM USA Security Camera EV 1006 N4SQ User Guide