|
20 Meter IR Vandal Proof Dome
Internet Camera
ICA-525
Quick Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing the ICA-525. It is versatile and high image solution
of surveillance application for day and night. The ICA-525 is also a stand-alone
camera system with a built-in processor and web server that provides highest
quality video and system performance.
Before Installation
Before installation, please be sure to read this quick installation guide or user’s
manual of bundle CD carefully to complete machine installation.
System Requirements
Network
10/100M Base-TX Ethernet
Interface
Monitoring
System
Recommended for Internet Explorer 6.0 or later
● CPU: Pentium 4, 1.5GHz or above
● Memory Size : 512 MB (512 MB or above Recommended)
System
Hardware
● VGA card resolution : 1024 x 768 or above
● Sound Card : Necessary
● Network bandwidth: In VGA resolution mode, mini-
mum upload bandwidth is 1Mbps
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Content
ICA-525 x 1
Power Adapter x 1
Screws x 4
Telephone box x 1
L-Wrench x 1
CD Disk x 1
Quick Installation Guide x 1
1. If any of the above items are missing, please contact your dealer
immediately.
2. Using a power supply with a different voltage that the one
included with the ICA-525 will cause damage and void the
warranty for ICA-525.
Note
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Cables
RJ-45 LAN
Video out
RS-485 & DI/DO
Line in
12V DC in
Line out
(Connect to a bundled TEL box)
1.RJ45 LAN socket: Connect to PC or Hub/Switch. For connect to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way
protocol can detect or negotiate the transmission speed of the network auto-
matically. Please use Category 5 “straight through” cable to connect the ICA-525
to a 100Mbps Fast Ethernet network switch or hub.
In case you need to connect the device to PC or notebook directly,
you should use cross over cable instead.
Note
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
2.RS-485 & DI/DO: Connect to a local keyboard controller and connect to sensor
in and alarm out devices.
Inside the TEL box:
Name
12VDC
GND
D+
Function
DC 12V output (50mA maximum)
GND
RS485 data +
D-
RS485 data -
DI
Digital signal input
Digital signal output
DO
The RS-485 of ICA-525 is master that can control external scanner.
Note
3. Local Video output (BNC port): The Network Camera also provides composite
video output. User can use BNC video cable to connect the Network Camera with
a TV monitor or VCR.
4. DC-in Jack: The input power is 12VDC. Note that supply the power to the
Network Camera with standard power adapter included in package. Otherwise,
the improper power adapter may damage the unit and result in danger.
5. Line in (audio in): Connect an audio input source to the ICA-525.
6. Line out (audio out): Connect a loud speaker to the ICA-525. This function is
for voice alerting and two-way audio.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation
1. Use the provided L-wrench, loosen the tamper-resistant housing cover (with
screws still attached on the cover). The unit has factory installed side conduit
entry and one may adjust the cables to back conduit entry according to installa-
tion requirement.
During the installation, please take care and avoid crash. That may
cause the device damage.
Note
2. Set the mounting base onto the wall or ceiling and center it over the mounting
hole, using the supplied four retaining screws to secure the main body.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Set the proper image by moving the camera body and set the focus by turning
the lens to left or right direction.
1. Vari-Focal Dome Operation Guide: Once the picture appears
on the monitor, open the cover and adjust the lens wrench to
“NEAR f gFAR”, get the view zoom that you desire, and then
adjust the focus wrench of the lens to obtain the best picture.
After adjustment, tighten both wrenches.
Note
2. During adjust focus, please take cares that don’t touch, collision
and knock sensor.
Zoom Adjustment
NEAR
Focal Adjustment
TELE
FAR
WIDE
4. When the ICA-525 focus adjustment has been completed, use the provided L-
wrench to fasten the tamper-resistant housing to the main body.
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
5. When using the side conduit cabling, it is suggested to cover the cables using
metal covers (to prevent external damage and for waterproof prevention), and
wined the waterproof adhesive type onto the metal cover before installation.
6. Connect the LAN cable to Ethernet’s switch or hub and the DC-Jack to the power
source. The video output to monitor or other video through a 75 Ohms type
coaxial cable if you will use BNC cable.
7. Done
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Utility Installation and operation
1. Insert the bundled CD into the CD-ROM drive to launch the autorun program.
Once completed, a welcome menu screen will appear.
2. Click the “IPWizard” hyperlink, you will see the InstallShield Wizard dialog box as
below.
If the welcome screen does not appear, click “Start” at the taskbar.
Then, select “Run” and type “D:\Utility\setup.exe”, assume D is
Note
your CD-ROM drive.
3. The “Welcome to the InstallShield Wizard for IPWizard” will display on the screen
and click “Next” to continue.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Please click “Next” to install with original settings, or you may click “Change…”
button to modify the install folder then press “Next” to continue.
5. Please click “Install” to start the installation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Please click “Finish” to complete the installation
7. Please double-click the utility icon
on the desktop then you will see the
ICA-525 utility.
8. Press “Search” button. IP Wizard will list all IP Cameras in your LAN environ-
ment:
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Wizard function:
Please select your ICA-525 and press “Wizard”. The utility featured
of “Wizard” function to help user to initial ICA-525. User can setup
Note
IP address, username and password step by step.
Please enter User Name and Password. Default Username is: admin, leave
password blank. Then click “Submit”.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Username and Password:
You may change the ID and assign a new password to your ICA-525 or keep the
original and press “Next” to continue.
As below, you can select “Static IP” and enter the IP settings. Or select “DHCP ON”
when there is a DHCP server in your network.
If no IP address is assigned after 30 seconds, ICA-525 will use its default address
the address field to login web configuration page and refer to our User’s manual in
the bundled CD disk to configure.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Utility Installation
The Cam Viewer Lite/Pro 30 days trial version installation steps are
similar. Below is the installation of Cam Viewer Lite.
Note
1. Insert the bundled Cam Viewer CD disk into the CD-ROM drive to launch the
autorun program. Once completed, a welcome menu screen will appear. Click
the “Cam Viewer Lite” hyperlink, the below InstallShield Wizard dialog box will
appear.
If the welcome screen does not appear, click “Start” at the taskbar.
Then, select “Run” and type “D:\Cam Viewer Lite\setup.exe”,
Note
assume “D” is your CD-ROM drive.
2. Selects the language which you want, Cam Viewer is current including fifteen
languages. Please select one of the language and click ”Next” to continue.
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The “Welcome to the InstallShield Wizard for Planet Cam Viewer Lite 1.0.0” will
display on the screen, please click “Next”.
4. Please read the license agreement and then check “I accept the terms of the
license agreement” if you are agreed and click “Next” to continue the installation
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Please key in user name and company name for which you want and click “Next”
to continue installation.
6. Check the option “Complete” – all program features will be installed (Requires
the most disk space) and click “Next” to continue installation.
1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
7. “Ready to Install the Program” will appear to prompt you to start the installation.
Please click “Install” to start.
8. Please click “No” to finish the Cam Viewer Lite installation.
In above step, when Cam Viewer works with MBM5 (Motherboard
Monitor 5), Cam Viewer will display CPU temperature and fan
speed. Please click “Yes” if you need this function and refer to the
manual of Cam Viewer CD disk for complete installation.
Note
For more information, please refer to the User’s manual in the bundled CD.
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Feature Listing for Cam Viewer
Cam Viewer Lite
Cam Viewer Pro
Software Version
IP Camera Input
Dual Monitor
Smart Guard
I/O Device
32
-
16 / 32 / 64
V
V
-
V
-
V
V
Hotline
-
Address Book
Unusual event
System log
Unusual event
System log
Log Viewer
Counting application
-
2 way counting
Unlimited
16 Channels
V
Counting Application
Remote Playback Server
Concurrent Playback
Counting Function
-
1 Channel
-
General Motion
General Motion
Missing Object
Foreign Object
Lose Focus
Smart Search
Camera Occlusion
1 Channel
16 Channel
Remote Live Viewer
1ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Suggest Hardware / System Requirement
Total FPS
~600
600~480
480~240
240~120
120~
Intel Core
2 Duo
QX6800
Intel Core
2 Duo
E6600
Intel
Pentium D
930
Intel P4
3.0 GHz
Intel P4
2.8 GHz
CPU
RAM
4 GB
2 GB
2 GB
1 GB
1 GB
Chipset of
Motherboard
Intel 946 or 965 chip, Intel Chipset recommended
ATI Radeon 9200, nVIDIA GeForce FX-5200,
Intel 945/965 or above (ATI recommended)
VGA Card
Ethernet
Hard Disk
O.S.
100 Base-TX or Above, Gigabit LAN recommended
160 GB or above
Windows 2000 / XP / 2003
Total FPS: Means all the cameras will spend how many frames when this software
works. Suppose there are 10 cameras, each one will work with 30fps, the total fps
should be 300fps.
Ordering Information for Cam Viewer Pro
Model
CVP-16
CVP-32
CVP-64
Description
16-Channel Cam Viewer Professional
32-Channel Cam Viewer Professional
64-Channel Cam Viewer Professional
Further Configuration
If you want to configure more detail settings of ICA-525, please refer to the user
manual in the CD disk.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|