DJ MIXER
DJM-900SRT
DJM-900SRT Serato DJ Edition
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.
For the latest version of the Serato DJ software, access Serato.com and download the software from there.
Quick Start Guide – Serato DJ Edition
Download from Www.Somanuals.com. All Manuals Search And Download.
Launching the Serato DJ software
Before installing the Serato DJ software
Installing the Serato DJ software
Serato DJ is a DJ software application by Serato. DJ performances are possible by
connecting the computer on which this software is installed to this unit.
!
!
The user is responsible for preparing the computer, network devices and other
elements of the Internet usage environment required for a connection to the
Internet.
For details on operating the Serato DJ software, see the Serato DJ software
manual.
For the Serato DJ software manual and information on the latest version of the
Serato DJ software, see [Software Info] under [DJM-900SRT] on the Pioneer
DJ support site below.
Installation Procedure (Windows)
Do not connect this unit and the computer until installation is completed.
!
!
Log on as the user which was set as the computer’s administrator before
installing.
If any other programs are running on the computer, quit them.
1 Insert the CD-ROM into the computer’s CD drive.
The CD-ROM menu is displayed.
!
If the CD-ROM menu does not appear when the CD-ROM is inserted, open the
CD drive from [Computer (or My Computer)] in the [Start] menu, then double-
click the [CD_menu.exe] icon.
Cautions on Installation
!
!
!
!
Before installing the Serato DJ software, turn this unit’s power switch off and
disconnect the USB cable connecting this unit to the computer.
If installation of the Serato DJ software is interrupted, follow the procedure
below to start installation over from the beginning.
Before installing the Serato DJ software, quit all other programs that are running
on the computer.
2 When the CD-ROM’s menu appears, select [Download
Serato DJ Software.], then click [Start].
3 “An internet environment is required to access the site.
Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is displayed.
The driver software is compatible with the following OSs.
Minimum operating environment
4 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ
Supported operating systems
CPU and required memory
support site.
®
[Serato DJ Support Information] is displayed.
Intel processor, Core™ 2 Duo 2.0 GHz or better
32-bit version
1 GB or more of RAM
Mac OS X: 10.6.8, 10.7.5
and 10.8
5 Click the link to the Serato DJ download page.
The Serato DJ download page is displayed.
®
Intel processor, Core™ 2 Duo 2.4 GHz or better
64-bit version
32-bit version
64-bit version
4 GB or more of RAM
®
6 Log in to your “Serato.com” user account.
Intel processor, Core™ 2 Duo 2.0 GHz or better
!
If you have already registered a user account on “Serato.com”, input the regis-
tered e-mail address and password to log in at “Serato.com”, then proceed to the
Serato DJ software download page.
2 GB or more of RAM
Windows: Windows 7
®
Intel processor, Core™ 2 Duo 2.4 GHz or better
4 GB or more of RAM
Proceed to step 8.
!
If you have not completed registering your user account, do so following the
procedure below.
Others
— Following the instructions on the screen, input your e-mail address and the
password you want to set, then select the region in which you live.
— If you check [E-mail me Serato newsletters], newsletters providing the
latest information on Serato products will be sent from Serato.
— Once user account registration is completed, you will receive an e-mail at the
e-mail address you have input. Check the contents of the e-mail sent from
“Serato.com”.
Be careful not to forget the e-mail address and password specified when you
performed user registration. They will be required for updating the software.
The personal information input when registering a new user account may be col-
lected, processed and used based on the privacy policy on the Serato website.
A USB 2.0 port is required to connect the computer with this
unit.
USB port
Display resolution
Internet connection
Resolution of 1 280 x 720 or greater
An Internet connection is required for registering the “Serato.
com” user account and downloading the software.
!
For the latest information on the required operating environment and compatibility as well as
to acquire the latest operating system, refer to “Software Info” under “DJM-900SRT” on the
Pioneer DJ support site below.
Operation is not guaranteed on all computers, even if all the required operating environment
conditions indicated here are fulfilled.
Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not
provide sufficient processing capabilities. For notebook computers in particular, make sure
the computer is in the proper conditions to provide constant high performance (for example
by keeping the AC power connected) when using Serato DJ.
!
!
!
!
7 Click the link in the e-mail message sent from “Serato.com”.
Proceed to the Serato DJ software download page.
!
Use of the Internet requires a separate contract with a provider offering Internet services and
payment of provider fees.
8 Download the Serato DJ software from the download
page.
Unzip the downloaded file, then double-click the unzipped file to launch the installer.
9 Read the terms of the license agreement carefully, and if
you agree, select [I agree to the license terms and conditions],
then click [Install].
!
If you do not agree to the contents of the license agreement, click [Close] to
cancel installation.
En
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation begins.
10Read the terms of the license agreement carefully, and if
you agree, click [Agree].
The message of successful installation appears once installation is completed.
10Click [Close] to quit the Serato DJ installer.
!
If you do not agree to the contents of the usage agreement, click [Disagree]
to cancel installation.
11If the following screen appears, drag and drop the [Serato
DJ] icon on the [Applications] folder icon.
Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is completed.
!
If any other programs are running on the computer, quit them.
1 Insert the CD-ROM into the computer’s CD drive.
The CD-ROM menu is displayed.
!
Double-click the CD icon on the desktop when folders are not displayed after a
CD-ROM has been loaded.
2 Double-click [CD_menu.app].
Launching the Serato DJ software
3 Select [Download Serato DJ Software.] from the CD-ROM’s
menu, then click [Start].
1 Turn on this unit’s power.
4 “An internet environment is required to access the site.
Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is displayed.
2 Connect this unit to your computer via a USB cable.
3 Launch the Serato DJ software.
!
For Windows
5 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ
support site.
[Serato DJ Support Information] is displayed.
From the Windows [Start] menu, click the [Serato DJ] icon under [All
Programs] > [Serato] > [Serato DJ].
!
!
For Mac OS X
6 Click the link to the Serato DJ download page.
In Finder, open the [Applications] folder, then click the [Serato DJ] icon.
The Serato DJ download page is displayed.
Computer screen when launching the Serato DJ software
This is the screen displayed when the DJM-900SRT and computer are con-
nected, before the driver is installed.
— When Serato DJ is launched the first time, an [BUY/ACTIVATE] icon may be
displayed in the license panel, but there is no need for DJM-900SRT users to
activate the software or purchase the license.
7 Log in to your “Serato.com” user account.
!
If you have already registered a user account on “Serato.com”, input the reg-
istered e-mail address and password to log in at “Serato.com”, then proceed
to the Serato DJ software download page.
Proceed to step 9.
!
If you have not completed registering your user account, do so following the
procedure below.
— Following the instructions on the screen, input your e-mail address and
the password you want to set, then select the region in which you live.
— If you check [E-mail me Serato newsletters], newsletters providing the
latest information on Serato products will be sent from Serato.
— Once user account registration is completed, you will receive an e-mail at
the e-mail address you have input. Check the contents of the e-mail sent
from “Serato.com”.
!
!
Be careful not to forget the e-mail address and password specified when you
performed user registration. They will be required for updating the software.
The personal information input when registering a new user account may
be collected, processed and used based on the privacy policy on the Serato
website.
8 Click the link in the e-mail message sent from “Serato.com”.
Proceed to the Serato DJ software download page.
9 Download the Serato DJ software from the download
1
page.
Unzip the downloaded file, then double-click the unzipped file to launch the installer.
1
License panel
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the driver software
This driver software is a special driver software for inputting and outputting audio
signals from the computer.
Cautions on Installation
!
If installation of the driver software is interrupted, follow the procedure in the
“Installing device driver software” section of this unit’s operating instructions
to start installation over from the beginning.
!
!
Before installing the driver software, terminate all other programs running on
your computer.
For information on the latest version of the driver software, see [Software Info]
under [DJM-900SRT] on the Pioneer DJ support site below.
Installation Procedure
Click the [INSTALL DRIVER] button on the Serato DJ software
screen.
Following the instructions displayed on the screen, install the driver software.
!
When installing the driver software before connecting the devices, installation is
performed in a different way.
For details, see this unit’s operating instructions.
En
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts of the Serato DJ software
Computer screen when the Serato DJ software and this unit are connected
This screen is an example of the screen displayed after the driver software is installed, with the computer and this unit connected and tracks loaded in the respective decks.
1
2
1
3
1 Deck section
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.
2 Waveform display
The loaded track’s waveform is displayed here.
3 Browser section
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.
!
This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see the Serato DJ soft-
ware manual.
The Serato DJ software manual can be downloaded from the Pioneer DJ support site below.
See [Software Info] under [DJM-900SRT].
Computer screen when the Serato DJ software and this unit are connected (setup screen)
This is the Setup screen displayed when the computer and this unit are connected after installing the driver software.
1
2
1
1 CALIBRATION DECK
The Serato DJ software calculates analog signals from the control disc and processes the signals of digital audio files.
Different signal levels and device statuses can be calculated for each usage environment to make the optimum settings for reading out the control signals.
2 Utility settings
Utility settings such as settings affecting the entire system and detailed operation settings can be made here.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Serato DJ software
The signals played on the Serato DJ software’s decks [DECK1] to [DECK4] are input to
this unit’s respective channels.
The combinations of the decks and the respective channels to which the sound is
input are fixed. These combinations are shown below.
Before controlling the Serato DJ software
Correspondence table of Serato DJ software decks and DJM-
900SRT channels
Serato DJ software deck
DECK3
DECK1
DECK2
DECK4
DJM-900SRT channel
CH1
CH2
CH3
CH4
Set the positions of the controls, etc., as shown below.
Names of controls, etc.
Position
Input selector switch
USB
MASTER
TRIM control
Turned fully counterclockwise
Center
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
LEVEL
DIGITAL
USB
USB
USB
USB
EQ/ISO (HI, MID, LOW) controls
COLOR control
DECK 3
DECK 1
DECK 2
DECK 4
1
1
1
1
Center
0
Channel faders
Moved forward
TRIM
TRIM
TRIM
TRIM
7
10
CROSS FADER ASSIGN (A, THRU, B) selector switch
MASTER LEVEL control
[THRU] position
Turned fully counterclockwise
OVER
OVER
OVER
OVER
OVER
2
2
2
2
10
7
10
7
10
7
10
7
9
9
9
9
7
HI
HI
HI
HI
4
4
4
4
4
2
2
2
2
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26
6
-
-
-
26
6
-
-
-
26
6
-
-
-
26
26
26
6
/
/
/
/
/
/
/
/
/
/
/
/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
MID
MID
MID
MID
EQ /
EQ /
ISO
EQ /
ISO
EQ /
ISO
3
3
3
3
3
ISO
5
5
5
5
5
26
26
6
26
26
6
26
26
6
6
7
7
7
7
7
LOW
LOW
LOW
LOW
10
15
24
10
15
24
10
15
24
10
15
24
10
15
24
dB
dB
dB
dB
L
dB
R
6
6
6
6
3
4
3
4
3
4
3
4
BALANCE
COLOR
COLOR
COLOR
COLOR
LOW
HI
LOW
HI
LOW
HI
LOW
HI
L
R
CUE
CUE
CUE
CUE
CUE
MONO STEREO
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
BOOTH MONITOR
0
EQ CURVE
ISOLATOR EQ
5
6
5
6
5
6
5
6
CH FADER
A
THRU
B
A
THRU
B
A
THRU
B
A
THRU
B
1 Input selector switch
2 TRIM control
3 EQ/ISO (HI, MID, LOW) controls
4 COLOR control
5 Channel faders
6 CROSS FADER ASSIGN (A, THRU, B) selector switch
7 MASTER LEVEL control
En
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Here we explain three types of connections for different usage environments.
!
!
!
When using analog players, proceed to page 8.
When using DJ players, proceed to page 9.
When using analog players and DJ players simultaneously, proceed to page 10.
When using analog players
Here we explain connections for using the Serato DJ software’s decks [DECK1] and [DECK2] connected to analog players.
Audio cable
Audio cable
Ground wire
Ground wire
L
R
L
R
CH 4
CH 3
CH 2
CH 1
PHONO CD/LINE
L
PHONO CD/LINE
L
PHONO CD/LINE
L
PHONO CD/LINE
L
RETURN
L(MONO)
MIC2
MIDI OUT
DIGITAL
R
R
OFF
ON
POWER
SIGNAL GND
SIGNAL GND
R
R
R
R
BOOTH
TRS
MASTER1
R
MASTER2 REC OUT
SEND
L(MONO)
CH2
CH4
CH1
IN
L
L
L
R
L
Analog player
Analog player
MASTER
OUT
LINK
R
R
CH3
AC IN
2 HOT
3 COLD
1 GND
DJM-900SRT
USB cable
CONTROL VINYL
CONTROL VINYL
To amplifier
To power outlet
Computer
1 Connect the analog player that will be controlling [DECK1]
to the [CH2] [PHONO] terminals, the analog player that will be
controlling [DECK2] to the [CH3] [PHONO] terminals.
5 Select [SETUP] on the Serato DJ software’s screen, then
select [TURNTABLES] at the [Audio] tab in the utility settings.
2 Connect the ground wires for the respective analog players
to this unit’s [SIGNAL GND] terminals.
3 Set the CONTROL VINYLs on the analog players.
4 Switch the DJM-900SRT’s input.
Switch the [CH2] and [CH3] input selector switches to [USB].
Input selector switch
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
DIGITAL
USB
DECK
USB
DECK
1
2
TRIM
TRIM
POWER
MIC
MIC1
USB
MASTER
MIDI
START
ON/OFF
UTILITY
LFO FORM
/
STOP
CD/ LINE PHONO
CD/ LINE PHONO
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
LEVEL
DIGITAL
DIGITAL
DIGITAL
USB
USB
DECK
USB
DECK
USB
DECK
3
1
2
DECK 4-
WAKE UP
BEAT EFFECTS
0
TRIM
TRIM
TRIM
TRIM
OVER
OVER
OVER
OVER
OVER
CH SELECT
1
2
3
4
10
7
10
7
10
7
10
7
10
7
MIC
MST
MIC
1
A
B
9
9
9
9
PARAMETER
0
0
AUTO
TAP
GRID
BPM
LEVEL
HI
HI
HI
HI
4
4
4
4
4
%
ms
2
2
2
2
2
MIC
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26
/
6
-
-
-
26 /
6
-
-
-
26 /
6
-
-
-
26 /
26 /
26 /
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
HI
MID
MID
MID
MID
-
X
PAD
12
12
12
EQ
3
EQ /
3
EQ /
ISO
3
EQ /
ISO
3
EQ /
ISO
3
ISO
LOW
5
5
5
5
5
12
7
26 /
6
6
7
26 /
6
6
7
26 /
6
6
7
6
6
7
LOW
LOW
LOW
LOW
TALK
10
15
24
10
15
24
10
15
24
10
15
24
10
15
24
OFF ON OVER
BEAT
TAP
dB
dB
dB
dB
AUTO
TAP
QUAN-
TIZE
L
dB
R
26 /
26 /
26 /
/
BALANCE
COLOR
COLOR
COLOR
COLOR
DUB
GATE/
COMP
SPACE
ECHO
SOUND COLOR FX
CUE
NOISE
CRUSH
FILTER
LOW
HI
LOW
HI
LOW
HI
LOW
HI
L
R
FLANGER PHASER
FILTER ROBOT
TRANS
LINK
CUE
CUE
CUE
CUE
CUE
MELODIC
SLIP ROLL
ROLL
REVERB
SPIRAL
ECHO
CUE
REV ROLL
MONO STEREO
DELAY
MIDI LFO
SND/RTN
FADER START
4
MIC
CF.A
1
2
3
4
3
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
2
1
CF.B
HEADPHONES
MONO SPLIT STEREO
BOOTH MONITOR
MASTER
TIME
MIXING
0
EQ CURVE
ISOLATOR EQ
CUE
MASTER
LEVEL/DEPTH
LEVEL
CH FADER
A
THRU
B
A
THRU
B
A
THRU
B
A
THRU B
MIN
MAX
0
CROSS FADER
ON/ OFF
CROSS FADER ASSIGN
PHONES
A
B
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
When using DJ players
Here we explain connections for using the Serato DJ software’s [DECK1] and [DECK2] connected to DJ players.
Audio cable
Audio cable
L
R
L
R
CH 4
CH 3
CH 2
CH 1
PHONO CD/LINE
L
PHONO CD/LINE
L
PHONO CD/LINE
L
PHONO CD/LINE
L
RETURN
L(MONO)
MIC2
MIDI OUT
DIGITAL
R
R
OFF
ON
POWER
SIGNAL GND
SIGNAL GND
R
R
R
R
BOOTH
TRS
MASTER1
R
MASTER2 REC OUT
SEND
L(MONO)
CH2
CH4
CH1
IN
L
L
L
R
L
MASTER
OUT
LINK
DJ player
DJ player
R
R
CH3
AC IN
2 HOT
3 COLD
1 GND
DJM-900SRT
USB cable
CONTROL CD
CONTROL CD
To amplifier
To power outlet
Computer
1 Connect the DJ player that will be controlling [DECK1]
to the [CH2] [CD/LINE] terminals, the DJ player that will be
controlling [DECK2] to the [CH3] [CD/LINE] terminals.
4 Select [SETUP] on the Serato DJ software’s screen, then
select [CDJS] at the [Audio] tab in the utility settings.
2 Load the CONTROL CDs in the DJ players.
3 Switch the DJM-900SRT’s input.
Switch the [CH2] and [CH3] input selector switches to [USB].
Input selector switch
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
DIGITAL
USB
DECK
USB
DECK
1
2
TRIM
TRIM
POWER
MIC
MIC1
USB
MASTER
MIDI
START
ON/OFF
UTILITY
LFO FORM
/
STOP
CD/ LINE PHONO
CD/ LINE PHONO
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
LEVEL
DIGITAL
DIGITAL
DIGITAL
USB
USB
DECK
USB
DECK
USB
DECK
3
1
2
DECK 4-
WAKE UP
BEAT EFFECTS
0
TRIM
TRIM
TRIM
TRIM
OVER
OVER
OVER
OVER
OVER
CH SELECT
1
2
3
4
10
7
10
7
10
7
10
7
10
7
MIC
MST
MIC
1
A
B
9
9
9
9
PARAMETER
0
0
AUTO
TAP
GRID
BPM
LEVEL
HI
HI
HI
HI
4
4
4
4
4
%
ms
2
2
2
2
2
MIC
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26
/
6
-
-
-
26 /
6
-
-
-
26 /
6
-
-
-
26 /
26 /
26 /
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
HI
MID
MID
MID
MID
-
X
PAD
12
12
12
EQ
3
EQ /
3
EQ /
ISO
3
EQ /
ISO
3
EQ /
ISO
3
ISO
LOW
5
5
5
5
5
12
7
26 /
6
6
7
26 /
6
6
7
26 /
6
6
7
6
6
7
LOW
LOW
LOW
LOW
TALK
10
15
24
10
15
24
10
15
24
10
15
24
10
15
24
OFF ON OVER
BEAT
TAP
dB
dB
dB
dB
AUTO
TAP
QUAN-
TIZE
L
dB
R
26 /
26 /
26 /
/
BALANCE
COLOR
COLOR
COLOR
COLOR
DUB
GATE/
COMP
SPACE
ECHO
SOUND COLOR FX
CUE
NOISE
CRUSH
FILTER
LOW
HI
LOW
HI
LOW
HI
LOW
HI
L
R
FLANGER PHASER
FILTER ROBOT
TRANS
LINK
CUE
CUE
CUE
CUE
CUE
MELODIC
SLIP ROLL
ROLL
REVERB
SPIRAL
ECHO
CUE
REV ROLL
MONO STEREO
DELAY
MIDI LFO
SND/RTN
FADER START
4
MIC
CF.A
1
2
3
4
3
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
2
1
CF.B
HEADPHONES
MONO SPLIT STEREO
BOOTH MONITOR
MASTER
TIME
MIXING
0
EQ CURVE
ISOLATOR EQ
CUE
MASTER
LEVEL/DEPTH
LEVEL
CH FADER
A
THRU
B
A
THRU
B
A
THRU
B
A
THRU B
MIN
MAX
0
CROSS FADER
ON/ OFF
CROSS FADER ASSIGN
PHONES
A
B
En
9
Download from Www.Somanuals.com. All Manuals Search And Download.
When using analog players and DJ players simultaneously
Here we explain connections for using the Serato DJ software’s [DECK1] and
[DECK2] connected to analog players, the Serato DJ software’s [DECK3] and
[DECK4] connected to DJ players.
5 Select the [MIXER OUTPUT] tab in the settings utility, then
from the pull-down menu corresponding to the channel
to which the player is connected, select [CH* Control Tone
PHONO] for [USB3/4] and [USB5/6] for using the analog
players, [CH* Control Tone CD/LINE] for [USB1/2] and [USB7/8]
for using the DJ players.
1 Connect the analog player that will be controlling [DECK1]
to the [CH2] [PHONO] terminals, the analog player that will be
controlling [DECK2] to the [CH3] [PHONO] terminals.
2 Connect the DJ player that will be controlling [DECK3]
to the [CH1] [CD/LINE] terminals, the DJ player that will be
controlling [DECK4] to the [CH4] [CD/LINE] terminals.
3 Switch the DJM-900SRT’s input.
Switch the input selector switches for channels [CH1] – [CH4] to [USB].
Input selector switch
CD/ LINE PHONO
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
DIGITAL
DIGITAL
USB
DECK
USB
DECK
USB
DECK
USB
DECK
3
1
2
4
TRIM
TRIM
TRIM
TRIM
POWER
MIC
MIC1
USB
MASTER
MIDI
START
ON/OFF
UTILITY
LFO FORM
/
STOP
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
CD/ LINE PHONO
DIGITAL
CD/ LINE PHONO
LEVEL
DIGITAL
DIGITAL
USB
DECK
USB
DECK
USB
DECK
USB
3
1
2
DECK 4-
WAKE UP
BEAT EFFECTS
0
TRIM
TRIM
TRIM
TRIM
OVER
OVER
OVER
OVER
OVER
CH SELECT
1
2
3
4
10
7
10
7
10
7
10
7
10
7
MIC
MST
MIC
MIC
1
A
B
9
9
9
9
PARAMETER
0
0
AUTO
TAP
GRID
BPM
LEVEL
HI
HI
HI
HI
4
4
4
4
4
%
ms
2
2
2
2
2
2
1
1
1
1
1
0
0
0
0
0
-
-
-
26
6
-
-
-
26
6
-
-
-
26
6
-
-
-
26
6
/
/
/
/
/
/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
2
1
2
1
2
1
2
1
2
HI
MID
MID
MID
MID
-
X
PAD
12
12
12
EQ
3
EQ /
3
EQ /
ISO
3
EQ /
ISO
3
EQ /
ISO
3
ISO
LOW
5
5
5
5
5
12
7
26
26
6
6
7
26 /
6
6
7
26 /
6
6
7
26 /
6
6
7
LOW
LOW
LOW
LOW
TALK
10
15
24
10
15
24
10
15
24
10
15
24
10
15
24
OFF ON OVER
BEAT
TAP
dB
dB
dB
dB
AUTO
TAP
QUAN-
TIZE
L
dB
R
26
/
26
/
26
/
/
BALANCE
COLOR
COLOR
COLOR
COLOR
DUB
GATE/
COMP
SPACE
ECHO
SOUND COLOR FX
CUE
NOISE
CRUSH
FILTER
LOW
HI
LOW
HI
LOW
HI
LOW
HI
L
R
FLANGER PHASER
FILTER ROBOT
TRANS
LINK
CUE
CUE
CUE
CUE
CUE
MELODIC
SLIP ROLL
ROLL
REVERB
SPIRAL
ECHO
CUE
REV ROLL
MONO STEREO
DELAY
MIDI LFO
SND/RTN
FADER START
4
MIC
CF.A
1
2
3
4
3
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
2
1
CF.B
HEADPHONES
MONO SPLIT STEREO
BOOTH MONITOR
MASTER
TIME
MIXING
0
EQ CURVE
ISOLATOR EQ
CUE
MASTER
LEVEL/DEPTH
LEVEL
CH FADER
A
THRU
B
A
THRU
B
A
THRU
B
A
THRU B
MIN
MAX
0
CROSS FADER
ON/ OFF
CROSS FADER ASSIGN
PHONES
A
B
4 Select [SETUP] on the Serato DJ software’s screen, then
select [CUSTOM] at the [Audio] tab in the utility settings.
When [CUSTOM] is selected, the DJM-900SRT settings utility is displayed.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Checking the control signals
Press the play button on the connected player and play track 1.
Green ring appears at [CALIBRATION DECK].
Check that the innermost ring is close to a true circle.
1
2
[crates] panel
[Files] panel
For details, see the Serato DJ software manual.
The Serato DJ software manual can be downloaded from the Pioneer DJ support site
below.
See [Software Info] under [DJM-900SRT].
Loading tracks
1 From the [crates] panel, click [crates], etc., to open [Library].
Selecting the play mode
The Serato DJ software provides three play modes that can be selected according to
2 Select a track from [Library], then drag and drop it to
[DECK1] to load it.
your intended purpose.
[ABS], [REL] and [INT] can be selected on the deck unit.
Here we explain the procedure with the play mode set to [ABS] as an example.
Playing tracks
Here we explain how to output the sound of [DECK1] (CH2) as an example.
Select [ABS] at the tab on the deck unit.
!
Set the volume of the devices (power amplifier, powered speakers, etc.) con-
nected to the [MASTER1] and [MASTER2] terminals to an appropriate level.
Note that loud sound will be output if the volume is set too high.
1 Press the play button on the connected player and play
track 1.
Play a track in the Serato DJ software.
2 Turn the [TRIM] control.
Turn the [TRIM] control to adjust so that the channel level indicator’s orange indica-
tor lights at the peak level.
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio level
of the speakers.
Adjust the sound level output from the [MASTER1] and [MASTER2] terminals to an
For a description of the respective play modes, see the Serato DJ software manual.
The Serato DJ software manual can be downloaded from the Pioneer DJ support site
below.
appropriate level.
See [Software Info] under [DJM-900SRT].
Note
This unit and the Serato DJ software include a variety of functions enabling individu-
alistic DJ performances. For details on the respective functions, see the operating
instructions and the Serato DJ software manual.
Importing or loading tracks
!
This unit’s operating instructions can be downloaded from the Pioneer DJ
support site. For details, see “Acquiring the manual” in this unit’s operating
instructions.
Importing tracks
Here we explain a typical method of operation for importing tracks.
!
The Serato DJ software manual can be downloaded from the Pioneer DJ support
site below.
See [Software Info] under [DJM-900SRT].
!
!
There are various ways to import tracks with the Serato DJ software. For details,
see the Serato DJ software manual.
If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ
Intro) and have already created track libraries, the track libraries you have previ-
ously created can be used as such.
Quitting the system
1 Click the [Files] key on the Serato DJ software screen to
open the [Files] panel.
The contents of your computer or the peripheral connected to the computer are
displayed in the [Files] panel.
1 Quit [Serato DJ].
When the software is closed, a message for confirming that you want to close it
appears on the computer’s screen. Click [Yes] to close.
2 Click the folder on the [Files] panel containing the tracks
you want to add to the library to select it.
2 Press the [POWER] button on this unit’s rear panel to turn
the power off.
3 On the Serato DJ software screen, drag and drop the
selected folder to the crates panel.
A crate is created and the tracks are added to the library.
3 Disconnect the USB cable from your computer.
— The specifications and design of this product are subject to change without
notice.
© 2013 PIONEER CORPORATION. All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
<DRI1157-A>
En
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|