DVD762/05
DVD Video Player
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
DK
SF
Luokan 1 laserlaite
Advarsel: Usynlig laserstråling ved
åbning når sikkerhedsafbrydere er ude
af funktion. Undgå utsættelse for
stråling.
Varoitus! Laitteen käyttäminen muulla
kuin tässä käyttöohjeessa mainitulla
tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei
saa olla alttiina tippu-ja roiskevedelle.
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen
fra nettet. Den indbyggede netdel er
derfor tilsluttet til lysnettet så længe
netstikket sidder i stikkontakten.
Huom.Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu
verkko-osa on kytkettynä
sähköverkkoon aina silloin, kun pistoke
on pistorasiassa.
S
Klass 1 laseraparat
Varning! Om apparaten används på
annat sätt än i denna bruksanvisning
specificerats, kan användaren utsättas
för osynlig laserstrålning, som
överskrider gränsen för laserklass 1.
Observera! Stömbrytaren är sekundärt
kopplad och bryter inte strömmen från
nätet. Den inbyggda nätdelen är
därför ansluten till elnätet så länge
stickproppen sitter i vägguttaget.
‘CONSUMERS SHOULD NOTETHAT NOT
ALL HIGH DEFINITIONTELEVISION SETS
ARE FULLY COMPATIBLEWITHTHIS
PRODUCT AND MAY CAUSE ARTIFACTS
TO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THATTHE USER SWITCHTHE
Due to the inconsistency of disc formats
provided by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
upgrade.
CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE
QUESTIONS REGARDING OURTV SET
COMPATIBILITYWITHTHIS MODEL 525p
AND 625p DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.’
The apparatus shall not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, shall be placed on
apparatus.
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Environmental Information
Laser safety
All unnecessary packaging has been
omitted.The packaging has been made
easy to separate into three materials:
cardboard (box), polystyrene foam
(buffer) and polyethylene (bags, protective
foam sheet).
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
CAUTION
(WARNING LOCATION: ONTHE
BACKPLATE OFTHE SET)
NEVER MAKE OR CHANGE
CONNECTIONSWITHTHE
POWER SWITCHED ON.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
DivX, DivX Certified, and
associated logos are
trademarks of
DivXNetworks, Inc and
are used under license.
This DVD player is in conformity
with the EMC directive and low-
voltage directive.
For Customer Use:
LASER
Type
Read carefully the information located at
the bottom of your DVDVIDEO player
and enter below the Serial No. Retain this
information for future reference.
Semiconductor laser
GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
Wave length
Output Power
Model No. DVP 762
10 mW (VCD/CD)
Serial No. _______________
Beam divergence 60 degree
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
VISIBLE AND INVISIBLE LASER
RADIATIONWHEN OPEN.
AVOID EXPOSURETO BEAM.
ADVARSEL
SYNLIG OG USYNLIG
LASERSTRÅLINGVED ÅBNING
UNDGÅ UDSÆTTELSE FOR STRÅLING
VARNING
SYNLIG OCH OSYNLIG
LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO!
AVATTAESSA OLET ALTTIINA
NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE
LASER SÄTEILYLLE. ÄLÄ KATSO
SÄTEESEEN
VORSICHT
GEFAHRVON SICHTBARER UND
UNSICHTBARER LASERSTRAHLUNG
BEI GEÖFFNETEM GEHÄUSE.
ATTENTION
RAYONNEMENT LASERVISIBLE ET
INVISIBLE EN CAS D’OUVERTURE
EXPOSITION DANGEREUSE AU
FAISCEAU
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Disc Operations
Supplied accessories ....................................... 8
Care and safety information.......................... 8
Playable Discs ................................................. 18
Region Codes ................................................. 18
Playing discs............................................... 18-19
Auto Eco Power standby mode ................ 19
Basic playback controls................................. 19
Selecting various repeat/shuffle functions 19
Repeat play mode ......................................... 19
Repeating a section within a chapter/track .
......................................................................... 19
Operations for video playback ................... 20
Using the Disc Menu.................................... 20
Zooming in ..................................................... 20
Resuming playback from the last stopped
point ................................................................ 20
Using the OSD menu .................................. 20
Special DVD features .................................... 21
Playing aTitle ................................................. 21
Camera Angle ................................................ 21
Changing the Audio Language .................... 21
Subtitles .......................................................... 21
SpecialVCD & SVCD Features ............. 21-22
Playback Control (PBC) .............................. 21
Preview ........................................................... 22
Playing MP3/Picture disc (JPEG/DivX/MPEG-
4) ....................................................................... 23
General Operation....................................... 23
Selecting a folder and track/file ................. 23
Special picture disc features ........................ 24
Preview Function .......................................... 24
Zoom picture ................................................ 24
Playback with multi-angles .......................... 24
Scan Effect ...................................................... 24
Playing MP3 music and JPEG picture
Connections
ConnectingTV............................................ 9-10
Using RGB jack ............................................... 9
Using CompositeVideo jacks (CVBS)........ 9
Using S-Video jack ........................................ 10
Using ComponentVideo jacks (Pr PbY) . 10
Using an accessory RF modulator ............ 11
Connecting the power cord........................ 11
Optional : Connecting to an Audio System .
........................................................................... 12
Stereo system has Dolby Pro Logic or Right
/ Left Audio In jack ....................................... 12
Optional: Connecting Digital AV Receiver ...
........................................................................... 12
Receiver has a PCM, Dolby Digital, or
MPEG2 decoder............................................ 12
Functional Overview
Front and Rear Panels .................................. 13
Remote Control ............................................ 14
Getting Started
Step 1: Inserting batteries into the
Remote Control ............................................ 15
Using the Remote Control to operate the
Player ............................................................... 15
Step 2: Setting up theTV ........................15-16
To deactivate Progressive manually ... 15-16
Selecting the colour system that
corresponds to yourTV.............................. 16
Step 3: Setting language preference ........... 17
Setting the OSD Language.......................... 17
Setting the Audio, Subtitle and Disc menu
language .......................................................... 17
simultaneously ............................................... 24
Digital Media Reader Operations
Digital Media Reader .................................... 25
Playable Media ................................................ 25
Playing pictures or videos files from memory
card .............................................................26-27
Special picture or video features from
memory card .................................................. 26
Searching a track/file .................................... 26
Saving files to memory card ....................... 27
Hot-plug detection .......................................27
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
DVD Menu Options
General Setup menu ...............................28-29
Locking/Unlocking the disc for viewing ... 28
Dimming system’s display screen .............. 28
Programming disc tracks.......................28-29
OSD Language............................................... 29
Screen Saver - turning on/off ..................... 29
DivX(R)VOD registration code ............... 29
Audio Setup Menu ...................................30-31
Digital Audio Setup....................................... 30
Setting the analogue output ....................... 30
CD Upsampling ............................................. 31
Night Mode - turning on/off....................... 31
Video Setup Menu ...................................31-33
TVType ........................................................... 31
Setting theTV Display ................................. 32
Switching theYUV/RGB .............................. 32
Progressive - turning on/off ........................ 32
Picture Setting ............................................... 33
Preference Setup Menu ..........................33-35
Audio, Subtitle, Disc Menu.......................... 34
Restricting playback by Parental Control.....
......................................................................... 34
MP3/JPEG Menu - turning on/off............... 34
Changing the Password ............................... 35
Setting the DivX Subtitle ............................ 35
Restoring to original settings ..................... 35
Troubleshooting ......................... 36–37
Specifications ...................................... 38
Glossary ......................................................................39
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
G Avoid high temperatures, moisture,
water and dust
Supplied accessories
– Do not expose the player, batteries or
discs to humidity, rain, sand or excessive
heat (caused by heating equipment or
direct sunlight.)
Scart cable
(black)
G Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.
Remote Control
and
two AA batteries
G Do not block the vents
– Do not operate the DVD Player in an
enclosed cabinet, allow about 2.5 cm (1
inches) of free space all around the player
for adequate ventilation.
PREVIEW MUTE
DIM
SLEEP
MODE
SAVE
2.5 cm
(1 inches)
2.5 cm
(1 inches)
PHILIPS
2.5 cm
(1 inches)
G Care of the cabinet
– Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
Care and safety information
G Power consumption
– When the system is switched to
Standby mode, it is still consuming power.
To disconnect the system from the power
supply completely, remove the AC power
plug from the wall jack.
G Finding a suitable location
– Place the player on a flat, hard, and
stable surface.
G Disc handling
– To clean a CD, wipe it in a
straight line from the center
towards the edge using a soft,
lint-free cloth. A cleaning
agent may damage the disc!
– Write only on the printed
side of a CDR(W) and only with a soft felt-
tipped pen.
– Handle the disc by its edge, do not
touch the surface.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
ConnectingTV
COMPONENT
VIDEO IN
S-VIDEO
IN
V
U
Y
(Pr/Cr)
AUDIO
OUT
S-VIDEO
IN
AUDIO
OUT
SCART/RGB IN
(Pb/Cb)
VIDEO IN
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
V
U
(Pr/Cr)
AUDIO
OUT
(Pb/Cb)
V
I
D
E
O
I
N
S-VIDEO
IN
Y
AUDIO
OUT
SCART/RGB IN
V
I
D
E
O
I
N
1
2
1
C
Y
DIGITAL AUDIO OUT
CVBS
Y
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
PCM/MPEG2/Dolby Digital
L
L
R
R
COAXIAL OPTICAL
COAXIAL OPTICAL
S-VIDEO
Pr
Pb
TV OUT
STERE
S-VIDEO
Pr
Pb
TV OUT
STEREO
IMPORTANT!
Using CompositeVideo jacks
(CVBS)
– You only need to make one video
connection from the following
options, depending on the
capabilities of yourTV system.
– Connect the DVD player directly
to theTV.
– SCART connection will let you
use the features of both the Audio
andVideo in the DVD Player.
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In,Video In, Composite or Baseband)
on theTV (cable not supplied).
2 To hear the sound of this DVD Player
through yourTV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on theTV
(cable not supplied).
Using SCART jack
G Use the SCART cable (black) to connect
the DVD Player’s SCART jack (TV OUT)
to the corresponding Scart input jacks on
theTV (cable supplied).
Helpful Hint:
–
Ensure that the “TV” indication on
SCART cable is connected to theTV
set and “DVD” indication on SCART
cable is connected to the DVD Player.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
S-VIDEO
V
U
Y
(Pr/Cr)
V
U
(Pr/Cr)
AUDIO
OUT
AUDIO
OUT
(Pb/Cb)
(Pb/Cb)
VIN
IN
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
Y
S-VIDEO
IN
S-VIDEO
IN
V
U
(Pr/Cr)
AUDIO
OUT
V
U
(Pr/Cr)
AUDIO
OUT
(Pb/Cb)
(Pb/Cb)
V
I
D
E
O
I
N
V
I
D
E
O
I
N
Y
Y
1
1
2
2
CVBS
CVBS
Y
Y
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
PCM/MPEG2/Dolby Digital
L
L
R
R
COAXIAL OPTICAL
COAXIAL OPTICAL
S-VIDEO
Pr
Pb
S-VIDEO
Pr
Pb
TV OUT
STEREO
TV OUT
STEREO
IMPORTANT!
– S-Video connection provides
IMPORTANT!
– Component Video connection
better picture quality.This option
must be available on yourTV.
provides higher picture quality. This
option must be available on yourTV.
– The progressive scan video
Using S-Video jack
quality is only possible through
ComponentVideo (Pr PbY) output.
1 Use the S-video cable to connect the
DVD system’s S-VIDEO OUT jack to
the S-Video input jack (or labeled asY/C
or S-VHS) on theTV (cable not supplied).
Using ComponentVideo jacks
(Pr PbY)
1 Use the component video cables (red/
blue/green) to connect the DVD system’s
Pr PbY jacks to the corresponding
Component video input jacks (or labeled
as Pr/Cr Pb/CbY) on theTV (cable not
supplied).
2 To hear the sound of this DVD Player
through yourTV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on theTV
(cable not supplied).
2 To hear the sound of this DVD Player
through yourTV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on theTV
(cable not supplied).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting the power cord
RF coaxial cable toTV
2
Back of RF Modulator
(example only)
INT IN
TO TV
AUDIO IN
VIDEO
IN
R
L
CH3 CH4
COMPONENT
VIDEO IN
S-VIDEO
IN
V
U
(Pr/Cr)
AUDIO
OUT
~
AC MAINS
(Pb/Cb)
VIDEO IN
Y
Antenna or
CableTV signal
1
CVBS
Y
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
C
Y
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
L
R
COAXIAL OPTICAL
COAXIAL OPTICAL
S-VIDEO
Pr
Pb
S-VIDEO
Pr
Pb
TV OUT
STER
IMPORTANT!
After everything is connected
– If yourTV only has a single
Antenna In jack (or labeled as 75
properly, plug in the AC power cord
to the power outlet.
ohm or RF In,) you will need an RF
Never make or change any connections
modulator in order to view the DVD
playback on theTV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
with the power switched on.
G If a disc is loaded, press STANDBY ON
on the DVD Player front panel,
➜ “DISC” appears on the display panel.
G If a memory card is inserted, press
STANDBY ON on the DVD Player
front panel,
Using an accessory RF modulator
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS jack to
the video input jack on the RF modulator.
➜ “SLOT1” or “SLOT2” appears on the
display panel.
G If there is neither a disc nor memory card
inserted,
2 Use the RF coaxial cable (not supplied) to
connect the RF modulator to yourTV’s
RF jack.
➜ “NO DISC” appears on the DVD
Player display panel.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Optional: Connecting Digital AV
Receiver
Optional: Connecting to an
Audio System
STEREO
OPTICAL
AV Receiver
AUDIO
OUT
OPTICAL
AUDIO
OUT
DIGITAL
DIGITAL
OR
CVBS
Y
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
CVBS
Y
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
L
R
COAXIAL OPTICAL
S-VIDEO
Pr
Pb
TV OUT
STEREO
COAXIAL OPTICAL
S-VIDEO
Pr
Pb
TV OUT
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1 Select one of the video connections
(CVBSVIDEO IN, S-VIDEO IN, SCART or
COMPONENTVIDEO IN) depending on
the options available on yourTV.
1 Select one of the video connections
(CVBSVIDEO IN, S-VIDEO IN, SCART or
COMPONENTVIDEO IN) depending on
the options available on yourTV.
2 Connect the COAXIAL or OPTICAL jack
of the DVD Player to the corresponding
Digital Audio In jack on your Receiver
(cable not supplied).
2 Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable not supplied).
3 Set the DVD Player’s Analog Output to
‘Stereo’ which delivers sound from only
the two front speakers and subwoofer.
(see page 30 “Setting the analogue output”).
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front and Rear Panels
9 STOP
–To stop playback
T NEXT
STANDBY-ON B
–To search or select next chapter or track
–
To switch the DVD Player to Standby
mode or ON
2;PLAY/PAUSE
–To start or interrupt playback
Disc tray
PREV S
–To search or select previous chapter or
track
OPEN/CLOSE /
–
Open/Close the disc tray
Display
Digital Media Reader (Slot 2)
–To slot in Compact Flash (Type 1) card
–
Shows the current status of the DVD
Player
Digital Media Reader (Slot 1)
–To slot in Secure Digital (SD), MultiMedia
Card (MMC), SmartMedia (SM) and
Memory Card (MC) card
IR Sensor
–
Point the remote control towards this
sensor
DIGITAL
MEDIA
IR
READER
See page 25 for Digital Media
Reader Operation
Mains (AC Power Cord)
–
Connect to a standard AC outlet
COAXIAL (Digital audio out)
–
Connect to coaxialAUDIO input of a
digital audio equipment
OPTICAL (Digital audio out)
Audio Out (Left/Right)
– Connect toAUDIO inputs of an amplifier,
receiver or stereo system
–
Connect to opticalAUDIO input of a
digital audio equipment
S-Video Out
Scart
–
Connect to S-Video input of aTV
– Connect to Scart input of aTV
CVBS (VIDEO Out)
YPbPr
– Connect toYPbPr input of aTV
–
Connect to CVBSVideo input of aTV
CVBS
Y
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
L
R
COAXIAL OPTICAL
S-VIDEO
Pr
Pb
TV OUT
STEREO
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Remote Control
RETURN / TITLE
–To go back to previous menu /
show title menu
POWER B
–
To switch the DVD player to
standby mode or ON
DISC MENU
– Enters or exits the disc contents
menu
– Switches on or off the playback
control mode (forVCD version
2.0 only)
0-9 numerical key pad
–
Selects numbered items in a
menu
DISPLAY
–
Displays information onTV
screen during playback
1 2 3 4
– Selects an item in the menu/
fast forward/backward, slow forward/
backward
SYSTEM MENU
–
Access or exit DVD Player’s
system menu
OK
PREVIEW MUTE
–Acknowledge menu selection
T
DIM
SLEEP
MODE
SAVE
–
To search or select next chapter
or track
S
–To search or select previous
chapter or track
SUBTITLE
–
To access subtitle language
system menu
STOP ( 9 )
–To stop playback
ANGLE
–
PLAY ( B )
–To start playback
Selects a DVD camera angle
ZOOM
–
PAUSE ( ; )
–To pause playback temporarily /
frame-by-frame playback
Enlarge a picture on theTV
screen
AUDIO
–
To access audio language system
menu
REPEAT
– Selects various repeat modes
REPEAT (A-B)
– Repeats playback a specific section
on a disc
DIM
–
Selects different levels of
brightness for display panel
PREVIEW
–To preview the content of a track
or whole disc
SLEEP
–
Sets the sleep timer function.
MODE
MUTE
– Disables or enables sound output
–
Selects the relevant active mode:
DISC or MEDIA SLOT 1 or 2
SAVE
–
To save MP3, DivX/MPEG4 or
JPEG files to the memory card.
Helpful Hint:
Press “STOP” for about 2 seconds to
OPEN or CLOSE disc tray.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 2: Setting up theTV
Step 1: Inserting batteries into
the Remote Control
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
pages 9-11 “ConnectingTV”).
3
1
2
1 Turn on theTV and set to the correct
video-in channel. You should see the
Philips DVD background screen on the
TV.
1 Open the battery compartment.
2 Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN, orVIDEO. See your
TV manual for more details.
2 Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3 Close the cover.
➜ Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see theVideo In
channel.
➜ Or, theTV Remote Control may have a
button or switch that chooses different
video modes.
Using the Remote Control to
operate the Player
1 Aim the Remote Control
IR
directly at the remote
sensor (iR) on the front
panel.
➜ Or, set theTV to channel 3 or 4 if you
are using an RF modulator.
3 If you are using external equipment, (eg.
audio system or receiver), turn it on and
select the appropriate input source for
the DVD Player output. Refer to the
equipment owner’s manual for detail.
2 Do not put any objects
between the Remote
Control and the DVD
Player while operating the
DVD Player.
To deactivate Progressive manually
The progressive scan display present 60
complete frames per seconds, rather than
30 frames per second of interlaced
scanning (ordinary normalTV system).
With nearly double the number of line,
progressive scan offers higher picture
resolution and eliminates bothersome
motion artifacts those jagged edge on
moving objects.
CAUTION!
– Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed properly.
To enjoy the full quality potential offered
by progressive scan feature, a progressive
scanTV is required.To activate
progressive function, refer to ‘Progressive
- turning on/off’ on page 32.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
4 Press 34 to highlight one of the options
To deactivate Progressive manually -
cont’d
below:
PAL – Select this if the connectedTV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
If the progressive function is activated, but
yourTV does not support progressive
function orYPbPr cable is not connected
accordingly, there will be a blank screen.
You can deactivated progressive function
as below:
NTSC – Select this if the connectedTV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
1 Press STANDBY ON on the front panel
to switch on the DVD player.
Multi – Select this if the connectedTV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
2 Press OPEN/CLOSE on the front panel
to open the disc tray.
3 Press 1 then, press MUTE on the
remote control.
5 Select an item and press OK.
➜ You should see the Philips DVD
background screen on theTV.
Helpful Hints:
–
Before changing the currentTV
Standard setting, ensure that yourTV
supports the ‘selectedTVType’ system.
Selecting the colour system that
corresponds to yourTV
–
If there is no proper picture on
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, theTV and the DVD Player
should match.
yourTV, wait for 15 seconds for auto
recovery.
CHANGING PAL TO NTSC
1. ENSURE THAT YOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
- - VIDEO SETUP PAGE - -
TV TYPE
PAL
OK
Cancel
TV DISPLAY
NTSC
MULTI
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
COMPONENT
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.
OK Cancel
1 Press SYSTEM MENU.
2 Press 2repeatedly to select {VIDEO
SETUP PAGE}.
3 Press 34 to highlight {TVTYPE}, then
press 2.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 3: Setting language
preference
Setting the Audio, Subtitle and Disc
menu language
You can select the audio language spoken
and subtitle languages in a video disc. If
the language selected is not available on
the disc, the disc’s default setting language
will be used instead.
You can select your preferred language
settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc.
Setting the OSD Language
The On-screen language for the system
menu will remain as you set it, regardless
of various disc languages.
- - PREFERENCE PAGE - -
AUDIO
ENGLISH
CHINESE
FRENCH
SPANISH
PORTUGUESE
POLISH
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DivX SUBTITLE
ITALIAN
- - GENERAL SETUP PAGE - -
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DivX(R) VOD CODE
ENGLISH
DANSK
1 Press STOP twice then, press SYSTEM
MENU.
DEUTSCH
ESPANOL
FRANÇAIS
2 Press 2repeatedly to select
{PREFERENCE PAGE}.
3 Press 34 to highlight one of the options
below at a time, then press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
1 Press SYSTEM MENU.
2 Press 2to select {GENERAL SETUP
PAGE}.
– ‘Disc Menu’ (disc’s menu)
3 Press 34 to highlight {OSD
4 Press 34 to select a language and press
LANGUAGE}, then press 2.
OK.
4 Press 34 to select a language and press
OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code ‘XXXX’ (see page 142 “Language
Code”) and press OK.
5 Repeat steps 3~4 for other language
settings.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
IMPORTANT!
Region Codes
– If the inhibit icon (ø or X) appears
on theTV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
– Depending on the DVD orVIDEO
CD, some operations may be
different or restricted.
DVD discs must be labeled for ALL
regions or Region 2 in order to
play on this Player.You cannot play
Discs that are labeled for other
regions.
ALL
2
Helpful Hints:
–
It may not be possible to play CD-R/RW
– Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so may cause
the disc player malfunction.
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
–
If you are having trouble playing a
certain disc, remove the disc and try a
different one. Improper formatted disc will
not play on this DVD Player.
Playable Discs
Your DVD Player will play:
– DigitalVideo Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
– DigitalVideo Discs +
Recordable[Rewritable] (DVD+R[W])
– Compact Discs (CDs)
Playing discs
1 Connect the power cords of the DVD
Player andTV (and any optional stereo or
AV receiver) to a power outlet.
2 Turn on theTV power and set to the
correctVideo In channel. (See page 15
“Setting up theTV”).
– MP3 discs, picture (Kodak, JPEG) files
on CD-R(W).
– JPEG/ISO 9660 format
3 Press STANDBY-ON on the DVD Player
front panel.
– Maximum 30 characters display.
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)
– Supported Bit-rates : 32~256 kbps
(MPEG-1), 8~160 kbps (MPEG-2)
variable bitrates
– MPEG-4 disc on CD-R(W)
– Simple profile
– Advanced simple profile (640-480)
– DivX disc on CD-R[W]/DVD+R[W]:
– DivX 3.11, 4.x and 5.x
➜ You should see the Philips DVD
background screen on theTV.
4 Press OPEN/CLOSE 0 button to open
the disc tray and load in a disc, then press
the same button again to close the disc
tray.
➜ Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing up.
– Q-pel accurate motion compensation
– Global Motion Compensation (GMC)
playback
5 Playback will start automatically. If not
press PLAY B.
➜ If a disc menu appears on theTV.
➜ If the disc is locked by parental control,
you must enter your four-digit password.
(See page 35).
TIPS:
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Selecting various repeat/shuffle
functions
Auto Eco Power standby mode
This is a power-saving feature, the system
will automatically switch to Eco Power
standby mode if you do not press any
button within 30 minutes after a disc has
stopped playing.
Pressing STANDBY-ON or POWER
key repeatedly will switch Eco Power
standby mode to on/off.
Repeat play mode
G While playing a disc, press REPEAT
continuously to choose a ‘Play Mode’.
DVD
™ RPT ONE (repeat chapter)
™ RPTTT (repeat title)
™ SHUFFLE (random play)
™ RPT SHF (repeat shuffle)
™ RPT OFF (repeat off)
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
VCD/SVCD/CD
™ RPT ONE (repeat track)
™ RPT ALL (repeat disc)
™ SHUFFLE (random play)
™ RPT SHF (repeat shuffling)
™ RPT OFF (repeat off)
Pausing playback
1 During playback, press PAUSEÅ.
➜ Playback will pause and sound will be
muted.
Helpful Hint:
2 Press PAUSEÅ again to select the next
–
ForVCD, repeat playback is not possible
picture frame.
if the PBC mode is switched on.
3 To resume normal playback, press
PLAY B.
Repeating a section within a
chapter/track
Selecting track/chapter
G Press S/ Tor use the numeric
keypad (0-9) to key in a track/chapter
number.
1 While playing a disc, press REPEAT A-B
at your chosen starting point.
2 Press REPEAT A-B again at your chosen
end point.
➜ If repeat mode is active, pressing S/
T will replay the same track/chapter.
➜ The section A and B can be set only
within the same chapter/track.
➜ The section will now repeat
continuously.
Searching backward/forward
G Press and hold S/ T, then press
PLAY Bto resume normal playback.
➜ While searching, pressing S/ T
again will decrease/increase the search
speed.
3 To exit the sequence, press REPEAT
A-B.
Helpful Hint:
–
Repeat A-B playback is not possible for
Stopping playback
G Press Ç.
JPEG.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Using the OSD menu
Operations for video playback
(DVD/VCD/SVCD)
OSD menu shows the disc playback
information (for example, title or chapter
number, elapsed playing time, audio/
subtitle language), a number of operations
can be done without interrupting disc
playback.
Using the Disc Menu
Depending on the disc, a menu may
appear on theTV screen once you load in
the disc.
1 During playback, press DISPLAY.
➜ A list of available disc information
appears on theTV screen.
To select a playback feature or item
G Use 1234keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
MENU
Title
02/14
02/14
5.1CH
02/14
1/1
0:56:14
0:07:02
OFF
Chapter
AUDIO
To access or remove the menu
G Press DISC MENU on the remote.
SUBTITLE
ANGLE
TT Time
CH Time
REPEAT
Time Disp. TITLE ELAPSED
Zooming in
Bitrate
This function allows you to enlarge the
picture on theTV screen and to pan
through the enlarged picture.
MENU
Track
02/14
Disc Time
0:49:17
1 During playback, press ZOOM
repeatedly to display the picture with
different scales.
Track Time 0:03:43
REPEAT OFF
Tune Disp. TOTAL ELAPSED
Bitrate
➜ Use 1234keys to pan through the
enlarged picture.
➜ Playback will continue.
2 Press 34 to view the information and
press OK to access.
2 Press ZOOM repeatedly to return to
3 Use the numeric keypad (0-9) to input
the number/time or press 34to make
the selection, then press OK to confirm.
➜ Playback will change to the chosen
time or to the selected title/chapter/
track.
the original size.
Resuming playback from the last
stopped point
Resume playback of the last 10 discs is
possible, even if the disc was ejected or
the power switched off.
G Load one of the last 10 discs.
➜ “LOADING” appears.
G Press PLAY Band the disc will be played
back from the last point.
To cancel resume mode
G In stop mode, press STOP 9again.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Special DVD Features
Playing aTitle
SpecialVCD & SVCD Features
Playback Control (PBC)
1 Press DISC MENU.
➜ The disc title menu appears on theTV
screen.
ForVCD with Playback Control (PBC)
feature (version 2.0 only)
G Press DISC MENU to toggle between
‘PBC ON’ and ‘PBC OFF’.
2 Use 341 2 keys or numeric keypad
(0-9) to select a play option.
➜ If you select ‘PBC ON’, the disc menu
(if available) will appear on theTV.
➜ Use the S/ T or the numeric
keypad (0-9) to select a play option.
3 Press OK key to confirm.
Camera Angle
G During playback, pressing RETURN will
G Press ANGLE repeatedly to select
return to the menu screen (if PBC is on).
different desired angle.
If you want to skip the index menu
and playback directly from the
beginning,
Changing the Audio Language
For DVD
G Press AUDIO repeatedly to select
G Press DISC MENU key on the remote
different audio languages.
control to switch to PBC off.
Changing the Audio Channel
ForVCD
G Press AUDIO to select the available
audio channels provided by the disc (LEFT
VOCAL, RIGHTVOCAL, MONO LEFT,
MONO RIGHT, STEREO).
Subtitles
G Press SUBTITLE repeatedly to select
different subtitle languages.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Preview Function
A
E
I
B
F
J
C
G
K
D
H
L
1 Press PREVIEW.
2 Press 34 to highlight {TRACK DIGEST},
{DISC INTERVAL} or {TRACK
INTERVAL}.
3 Press OK to open one option.
(example for 12 thumbnail pictures display)
SELECT DIGEST TYPE:
TRACK DIGEST
4 Use 1234keys to select a track or
use numeric keypad (0-9) to input the
selected track number next to {SELECT}.
DISC INTERVAL
TRACK INTERVAL
5 Press S/ Tto open the previous
Track Digest
or next page.
This function will minimise the picture of
every track in order to display every six
of these tracks on the screen to help you
know the content of every track on the
disc.
6 Press OK to confirm.
To quit preview function
G Use 1234keys to highlight {EXIT} and
press OK to confirm.
Disc Interval
This function is used to divide a disc into
six parts by regular intervals and display
them on one page to preview the whole
disc.
To return to preview menu
G Use 1234keys to highlight {MENU}
and press OK to confirm.
Track Interval
For CD
This function is used to divide a single
track into six parts by regular intervals
and display them on one page to help you
preview the selected track.
G At stop mode, press PREVIEW on the
remote control.
➜ Each track will be played for a few
seconds.
➜ For JPEG CD, press PREVIEW to
view 12 thumbnail pictures on theTV
screen (see page 24).
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
During playback, you can;
Playing MP3/Picture disc (JPEG/
DivX/MPEG-4)
G Press S / T to select another
track/file in the current folder.
IMPORTANT!
G To select another folder from the current
disc, press 1to return to the root menu,
then press 34to make your selection
and press OK to confirm.
You have to turn on yourTV and set to
the correctVideo In channel. (See page
15 “Setting up theTV”).
G Press REPEAT continuously to access
General Operation
different ‘Play Mode’.
1 Load a disc.
MP3
➜ The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜ The data disc menu appears on theTV
screen.
™ RPT ONE (repeat track)
™ RPT FLD (repeat folder)
™ SHUFFLE (random play)
™ RPT OFF (repeat off)
JPEG
2 Playback will start automatically. If not
™ RPT ONE (repeat track)
™ RPT ALL (repeat disc)
™ SHUFFLE (random play)
™ RPT OFF (repeat off)
press PLAY B.
00:00 00:00
001/020
Coco Lee
MPEG4/DivX
™ RPT ONE (repeat track)
™ RPT ALL (repeat disc)
™ RPT OFF (repeat off)
MP3
Coco
Coco
-
-
-
-
Before
I love
Jazz
MP3
MP3 Coco
MP3 Coco
Hot spring
G Press Åto pause playback.
Helpful Hints:
–
It may not be possible to play certain
MP3/JPEG/DivX/MPEG-4 disc due to the
configuration and characteristics of the disc
or condition of the recording.
Selecting a folder and track/file
1 Press 34 to select the folder and press
OK to open the folder.
–
It is normal to experience an occasional
“skip” while listening to your MP3 disc.
It is normal to experience an occasional
2 Press 34 to select a track/file.
–
3 Press OK to confirm.
pixelation during MPEG-4/DivX playback
due to poor clarity of digital contents during
internet downloading.
➜ Playback will start from the selected
file to the end of the folder.
–
For multi-session discs with different
formats, only the first session will be
available.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Zoom picture
Special picture disc features
1 During playback, press ZOOM repeatedly
IMPORTANT!
to display the picture with different scales.
You have to turn on yourTV and set to
the correctVideo In channel. (See page
15 “Setting theTV”).
2 Use 1234keys to view the zoomed
picture.
Playback with multi-angles
1 Load a picture disc (Kodak Picture CD,
JPEG).
G During playback, press 3412 to rotate
the picture on theTV screen.
➜ For Kodak disc, the slide show will
begin.
➜ For JPEG disc, the picture menu
appears on theTV screen.
3: flip the picture vertically
4: flip the picture horizontally
1: rotate the picture anti-clockwise
2: rotate the picture clockwise
2 Press Bto start the slide-show playback.
Scan Effect
Preview Function (JPEG)
G Press ANGLE repeatedly to choose
different scan effect.
This function shows the content of the
current folder or the whole disc.
➜ Various of scan effect appears on the
top left hand corner on theTV screen.
1 Press STOP during playback.
➜ 12 thumbnail pictures will appear on
theTV screen.
Playing MP3 music and JPEG picture
simultaneously
1 Load a disc that contains music and
picture.
➜ The disc menu appears on theTV
screen.
2 Select an MP3 track.
3 During MP3 music playback, select a
picture from theTV screen and press
PLAY B.
2 Press S / T to display the other
pictures on the previous/next page.
➜ The picture files will be played back
one after another until end of the folder.
3 Use 1234 to highlight one of the
picture and press OK to start playback.
4 Press DISC MENU to return to Picture
4 To quit simultaneous playback, press
CD menu.
DISC MENU followed by Ç.
Helpful Hint:
–
Some files on Kodak or JPEG disc may
be distorted during playback due to the
configuration and characteristics of the disc.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Media Reader Operations
Playable Media
Digital Media Reader
G The Digital Media Reader allows you to
read/play photo (JPEG), MP3, DivX and
MPEG4 files from the following types of
memory cards:
This DVD Player is equipped with a
Digital Media Reader that enables you to:
– View digital photos (JPEG) recorded
from your digital camera’s memory card.
– Play MP3, DivX and MPEG4 files from
memory cards.
–
–
–
–
–
Compact Flash (Type 1) {CF}
Secure Disk {SD}
Memory Stick {MS}
Smart Media {SM}
Multimedia Card {MMC}
Precaution on handling the memory
card
– Never pull out the memory card from
the slot while it is in reading, writing
operation.
– Do not put any sharp objects into the
memory card slot to avoid electric shock.
Insert only appropriate memory cards
into the slot.
– Do not attach any other material than
the supplied label on the label space.
– Do not touch the memory card
connector with fingers or metal objects.
– Do not bend, drop, disassemble or
modify the memory card.
Supported media types
– Digital photos of .JPG or JPEG
extensions
– MP3 music files
– DivX 3.11/4.x/5.x files
Not supported media types
– Files with extensions .BMP, .GIF, .TIFF,
etc.
– .WMA, .WMV, .M3U, .PLS, etc.
– .ASF, .MOV, .MP4, etc.
G The speed with which a photo is save,
read and displayed on yourTV screen
depends on the file size.
G The bigger file size, the longer it will takes
for the player to read and display on the
TV screen.
– Do not allow the memory card to get wet.
– If you use a memory card that has been
initialised using a computer or if you
initialise a memory card attached to a
camera using a USB connection, further
operation is not guaranteed.
– An image file that has been modified
using an image processing software may
not open if it is converted into a different
file format.
TIPS: Some operating features are similar and being described in section ‘Disc Operation’.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Media Reader Operations
Playing pictures or videos files
from memory card
Special picture or video features
from memory card
1 Remove the memory card from your
digital camera and plug it into the digital
media reader on your player.
IMPORTANT!
You have to turn on yourTV and set to
the correctVideo In channel. (See page
15 “Setting theTV”).
2 Press MODE until “SLOT1” or
“SLOT2” appears on the display panel.
1 Plug in a supported memory card format
into the digital media reader on your
player.
3 Turn on theTV power and set to the
correctVideo In channel. (See page 15
“Setting theTV”).
➜ The picture menu appears on theTV
screen.
➜ If the memory card is recognised, you
can see 12 thumbnail pictures will appear
on theTV.
2 Press Bto start the slide-show playback.
4 You can also use the 1234to make
your selection from the 12 thumbnail
pictures.
During playback, you can;
G Press DISPLAY to toggle between single
elapsed time and single remain time (for
MP3 and DivX playback only).
G If you press OK, the selected picture will
show on theTV screen.
G If you press 2;, the slide-show playback
G Press DISC MENU to enter or exit file
will begin from the selected picture.
directory.
5 Pull out the memory card from the digital
media reader on your player to remove
the memory card.
G Press 2;to pause/resume playback.
G To stop playback, press Ç.
Searching a track/file
1 Press Tbriefly during playback to go
to the next track/file.
2 Press Sto return to the beginning of
the current track/file or press Sagain
to go to the previous track/file.
3 Press OK to confirm.
➜ Playback will start from the selected
track/file to the end of the folder.
TIPS: Some operating features are similar and being described in section ‘Disc Operation’.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Media Reader Operations
G An error dialog box will appear on theTV
Saving files to memory card
screen when files cannot be saved into
the faulty memory card.
1 Press SAVE to save files in the memory
card without overwrite the existing
filenames.
➜ A dialog box will appears on theTV
screen.
ERROR MESSAGE
SLOT 1
SLOT 2
G When the capacity of the memory card
used is full,
CANCEL
➜ A dialog box appears on theTV screen.
2 Use 3or 4to choose either SLOT1,
SLOT2 or to cancel the save operation.
3 Press OK to confirm selection.
MEMORY CARD FULL
G If {CANCEL} is selected, the player will
resume to previous file.
G If {SLOTX} is selected, the file will be
saved in the root directory without
overwriting the existing filenames.
Helpful hint:
–
MP3, JPEG or DivX/MPEG4 files could
be copied from CD to memory cards or
between memory cards.
For MP3, JPEG and MPEG4/DivX
In stop mode, files can be saved while in
the file browser.
Hot-plug detection
For JPEG
Files can be saved during playback or even
can be saved after the photo’s are rotated.
1 Slot in a memory card into one of the
memory slot.
➜ “Press Mode KeyTo Select Slot” will
appears on theTV screen,
2 Choose the selected memory slot and
press PLAY/PAUSE to start playback.
TIPS: Some operating features are similar and being described in section ‘Disc Operation’.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
This DVD Player setup is carried out via
theTV, enabling you to customise the
DVD Player to suit your particular
requirements.
Dimming player’s display panel
You can select different levels of
brightness for the display screen.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {DISPLAY DIM}, then press 2.
General Setup menu
100% – Select this for full brightness.
70% – Select this for medium brightness.
40% – Select this for dimming the display.
1 In disc mode, press SYSTEM MENU.
2 Press 1 2 to select ‘General Setup’ icon.
3 Press OK to confirm.
2 Press 34 to select a setting, then press
OK to confirm your selection.
- - GENERAL SETUP PAGE - -
DISC LOCK
Programming disc tracks (not for
Picture CD/MP3)
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DivX(R) VOD CODE
You can play the contents of the disc in
the order you want by programming the
tracks to be played. Up to 20 tracks can
be stored.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {PROGRAM}, then press 2 to
select {INPUT MENU}.
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the
disc maker. You can prevent a specific disc
from playing by locking the disc. Up to 40
discs can be locked.
2 Press OK to confirm.
Program : Track (01 - 17)
01 04
01 10
03 11
04 __
05 __
01 __
01 __
03 __
04 __
05 __
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {DISC LOCK}, then press 2.
LOCK
EXIT START NEXT
Select this to block the playback of the
current disc. Subsequent access to a
locked disc requires six-digit password.
The default password is ‘136 900’ (see
page 35 “Changing the password”).
To input your favourite tracks/chapter
3 Use the numeric keypad (0-9) to enter
a valid track/chapter number.
4 Use 1234keys to move the cursor to
the next position.
UNLOCK
Select this to unlock the disc and allow
future playback.
➜ If the track number is more than ten,
press T to open the next page and
proceed with programming or,
➜ Use 1234keys to highlight {NEXT}
on the programme menu, then press OK.
2 Press 34 to select a setting, then press
OK to confirm your selection.
5 Repeat steps 3~4 to input another
track/chapter number.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
If you want to remove a track
6 Use 1234keys to move the cursor to
DivX(R)VOD registration code
Philips provide you the DivX® VOD
(Video On Demand) registration code
that allows you to rent and purchase
videos using the DivX® VOD service at
the track you want to remove.
7 Press OK to remove this track from the
programme menu.
To start programme playback
8 Use 1234keys to highlight {START}
on the programme menu, then press OK.
➜ Playback will start with the selected
tracks under the programmed sequence.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {DIVX(R)VOD CODE}, then
press 2.
➜ The registration code will appear.
2 Press OK to exit.
To exit programme playback
3 Use the registration code to purchase or
rent the videos from DivX® VOD service
9 Use 1234keys to highlight {EXIT} on
the programme menu, then press OK.
instructions and download the video onto
a CD-R for playback on this DVD player.
OSD Language
This menu contains various language
options for display language on the
screen. For details, see page 17.
Helpful Hints:
–
VOD can only be played back on this DVD
player.
All the downloaded videos from DivX®
–
Time search feature is not available
Screen Saver - turning on/off
during DivX movie playback.
The screen saver will help to prevent
yourTV display device from becoming
damaged.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {SCREEN SAVER}, then press 2.
ON
Select this if you wish to turn off theTV
screen when disc playback is stopped or
paused for more than 15 minutes.
OFF
Select this to disable the screen saver
function.
2 Press 34 to select a setting, then press
OK to confirm your selection.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
LPCM Output
Audio Setup Menu
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate.The higher the sampling rate, the
better the sound quality.
1 In disc mode, press SYSTEM MENU.
2 Press 1 2 to select ‘Audio Setup’ icon.
3 Press OK to confirm.
➜ 48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
➜ 96kHz: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic mode.
- - AUDIO SETUP PAGE - -
ANALOG OUTPUT
DIGITAL AUDIO SETUP
CD UPSAMPLING
NIGHT MODE
Helpful Hint:
–
LPCM Output can be selected only when
PCM Only is activated.
Digital Audio Setup
The options included in Digital Audio
Setup are:‘Digital Output’ and ‘LPCM
Output’.
Setting the analogue output
Set Analogue Output to match your DVD
Player’s playback capability. This function
can also be accessed via the
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
SURROUND button on the remote.
2 Press the 34 keys to highlight an option.
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight {ANALOG OUTPUT}, then
press 2.
3 Enter its submenu by pressing 2.
4 Move the cursor by pressing the 34 keys
to highlight the selected item.
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers and subwoofer.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜ Off:Turn off the digital output.
➜ All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜ PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
VIRTUAL SURROUND
Allows the DVD player to use virtual
surround sound effects.
2 Press 34 to select a setting, then press
Helpful Hints:
OK to confirm your selection.
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
You cannot hear or record the SACD
playback if you use the digital connection.
–
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
CD Upsampling
Night Mode - turning on/off
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
In this mode, the high volume outputs are
softened and low volume outputs are
brought upward to an audible level. It is
useful for watching your favourite action
movie without disturbing others at night.
automatically switch to stereo mode.
1 In ‘AUDIO SETUP PAGE’, press 34 to
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight {NIGHT MODE}, then press 2.
highlight {CD UPSAMPLING}, then press
2.
ON
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
OFF
Select this when you want to enjoy the
surround sound with its full dynamic
range.
the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
2 Press 34 to select a setting, then press
OK to confirm your selection.
2 Press 34 to select a setting, then press
Video Setup Menu
OK to confirm your selection.
1 In disc mode, press SYSTEM MENU.
2 Press 1 2 to select ‘Video Setup’ icon.
3 Press OK to confirm.
Helpful Hint:
–
CD upsampling feature is only applicable
to stereo output setting.
- - VIDEO SETUP PAGE - -
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
COMPONENT
TVType
This menu contains the options for
selecting the colour system that matches
the connectedTV. For details, see page
16.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
Setting theTV Display
Switching theYUV/RGB
Set the aspect ratio of the DVD Player
according to theTV you have connected.
The format you select must be available
on the disc. If it is not, the setting forTV
display will not affect the picture during
playback.
This setting allows you to toggle the
output of the video signal between RGB
(on scart) andY Pb Pr (YUV).
1 In ‘VIDEO SETUP PAGE’, press 34 to
highlight {COMPONENT}, then press 2.
YUV
1 In ‘VIDEO SETUP PAGE’, press 34 to
Select this forY Pb Pr connection.
highlight {TV DISPLAY}, then press 2.
RGB
2 Press 34 to highlight one of the options
Select this for Scart connection.
below:
2 Press 34 to select a setting, then press
4:3 PAN SCAN –
OK to confirm your selection.
Select this if you have
a normalTV and want
both sides of the
picture to be trimmed or formatted to fit
yourTV screen.
Warning:
When the player is set toY Pb Pr
(YUV), someTV may not properly
synchronise with player on the
SCART connector.
4:3 LETTER BOX –
Select this if you have a
normalTV. In this case, a
wide picture with black
Progressive - turning on/off
This feature is only applicable if you have
connected this DVD Player to a
Progressive ScanTV through theY Pb Pr
jacks (see page 10).
bands on the upper and lower portions of
theTV screen will be displayed.
16:9 – Select this if
you have a wide-
screenTV.
1 In ‘VIDEO SETUP PAGE’, press 34 to
highlight {PROGRESSIVE}, then press 2.
5 Select an item and press OK.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2 Press 34 to select a setting, then press
OK to confirm your selection.
Helpful Hint:
–
To deactivate the progressive function
manually, see page 15-16.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
BRIGHTNESS
Picture Setting
Increase the value will brighten the
picture or vice versa. Choose zero (0) for
average setting.
This DVD Player provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
CONTRAST
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
1 In ‘VIDEO SETUP PAGE’, press 34 to
highlight {PICTURE SETTING}, then press
2.
TINT
STANDARD
Select this for standard picture setting.
Increase the value will darken the picture
or vice versa. Choose zero (0) for
average setting.
BRIGHT
Select this will make theTV picture
brighter.
COLOUR
Increase the value will enhance the colour
in your picture or vice versa. Choose zero
(0) to balance the colour.
SOFT
Select this will make theTV picture softer.
5 Press 1 2 to adjust the setting that best
PERSONAL
suit your personal preference.
Select this to personalise your picture
colour by adjusting the brightness,
contrast, tint and colour (saturation).
6 Repeat steps 4~5 for adjusting other
colour features.
7 Press OK to confirm.
2 Press 34 to select a setting, then press
OK to confirm your selection.
3 If you select {PERSONAL}, then proceed
to steps 4~7.
Preference Setup Menu
➜ The ‘PERSONAL PICTURE SETUP’
menu appears.
1 Press Ç twice to stop playback (if any),
then press SYSTEM MENU.
PERSONAL PICTURE SETUP
2 Press 1 2 to select the‘Preference Setup’
BRIGHTNESS
CONTRAST
TINT
0
0
0
0
icon.
3 Press OK to confirm.
COLOR
4 Press 34 to highlight one of the following
options.
- - PREFERENCE PAGE - -
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DivX Subtitle
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
Helpful Hints:
Audio, Subtitle, Disc Menu
–
VCD, SVCD, CD have no level indication,
These menus contain various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 17.
so parental control function has no effect on
these type of discs.This applies to most illegal
DVD discs.
–
Some DVDs are not encoded with a
rating though the movie rating may be
printed on the Disc cover. The rating level
feature does not work for such Discs.
Restricting playback by Parental
Control
Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes.
PBC
You can set the PBC to ON or OFF. This
feature is available only onVideo CD 2.0
with playback control (PBC) feature. For
details, see page 21.
MP3/JPEG Menu - turning on/off
MP3/JPEG Navigator can be set only if the
disc is recorded with menu. It allows you
to select different display menus for easy
navigation.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight {PARENTAL}, then press 2.
1 In ‘PREFERENCE PAGE’, press 34 to
- - PREFERENCE PAGE - -
highlight {MP3/JPEG NAV}, then press 2.
AUDIO
1 KID SAFE
2 G
SUBTITLE
DISC MENU
PARENTAL
PBC
WITHOUT MENU
Select this to display all the files contained
in the MP3/Picture CD.
3 PG
4 PG 13
5 PGR
6 R
MP3/JPEG NAV
PASSWORD
DivX SUBTITLE
7 NC 17
8 ADULT
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
2 Press 34 to highlight a rating level for the
disc inserted and press OK.
2 Press 34 to select a setting, then press
OK to confirm your selection.
➜ To disable Parental controls and have
all Discs play, select {8 ADULT}.
3 Use the numeric keypad (0-9) to enter
the six-digit password (see page 35
“Changing the password”).
➜ DVDs that are rated above the level
you selected will not play unless you enter
your six-digit password.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press SYSTEM MENU.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
Changing the Password
Setting the DivX Subtitle
The same password is used for both
Parental Control and Disc Lock. Enter
your six-digit password when prompted
on the screen. The default password is
136 900.
1 When selecting an embedded
subtitle during playback,
Load a DivX disc and press SUBTITLE
repeatedly to select available subtitle.
2 When selecting an external DivX
text subtitle during playback,
If available on the recorded disc, you can
select the external DivX subtitle in text
format.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight {PASSWORD}, then press 2 to
select {CHANGE}.
G In ‘PREFERENCE PAGE’, press 3 4 to
- - PREFERENCE PAGE - -
highlight {DivX SUBTITLE}, then press 2.
AUDIO
ENGLISH
A standard list of English subtitle fonts
provided by this DVD Player.
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
CYRILLIC
Select this to display a cyrillic subtitle
PASSWORD
CHANGE
DivX SUBTITLE
fonts.
G Press 34 to select a setting, then press
2 Press OK to enter the ‘Password Change
OK to confirm your selection.
Page’.
G You can also press SUBTITLE
repeatedly to select available subtitle.
Helpful Hint:
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
–
Subtitle files with the following filename
extensions (.srt, .smi, .sub, .ssa, .ass) are
supported but do not appear on the file
navigation menu.
OK
3 Use the numeric keypad (0-9) to enter
your old six-digit password.
Restoring to original settings
➜ When doing this for the first time, key
in ‘136900’.
➜ If you forget your old six-digit
password, key in ‘136900’.
Setting the DEFAULT function will reset
all options and your personal settings to
the factory defaults, except your
password for Parental Control and Disc
Lock.
4 Enter the new six-digit password.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight {DEFAULT}, then press 2 to
select {RESET}.
5 Enter the new six-digit password a second
time to confirm.
➜ The new six-digit password will now
take effect.
2 Press OK to confirm.
➜ All settings will now reset to factory
defaults.
6 Press OK to confirm.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power
– Check if the AC power cord is properly connected.
– Press the STANDBY ON on the front of the DVD
system to turn on the power.
No picture
– Refer to yourTV’s manual for correctVideo In
channel selection. Change theTV channel until you
see the DVD screen.
– Check if theTV is switched on.
Distorted picture
– Sometimes a small amount of picture distortion may
appear depending on the disc being played back.This
is not a malfunction.
Completely distorted picture or
black/white picture with DVD
– Connect DVD Player directly to theTV.
– Make sure the disc is compatible with the DVD/
Player.
– Ensure that the DVD Player’sTVType is set to match
that of the Disc and yourTV.
No sound or distorted sound
No audio at digital output
– Adjust the volume.
– Check that the speakers are connected correctly.
– Check the digital connections.
– Check if your receiver can decode MPEG-2 or DTS
and if not, please make sure the digital output is set
to PCM.
– Check if the audio format of the selected audio
language matches your receiver capabilities.
No sound and picture
– Check that the RGB/SCART cable is connected to
the correct device (See ConnectingTV).
Disc can’t be played
– The DVD+R/CD-R must be finalised.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a Picture CD or MP3 CD
yourself, ensure that your disc contains at least 10
pictures or 5 MP3 tracks.
– Region code incorrect.
Picture freezes momentarily
during playback
– Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from centre to edge.
No return to start-up screen when
disc is removed
– Reset the unit by switching the player off, then on
again.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
The player does not respond to
the Remote Control
– Aim the Remote Control directly at the sensor
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
Buttons do not work
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Player does not respond to some
operating commands during playback.
– Operations may not be permitted by the disc.
Refer to the instructions of the disc jacket.
DVD Player cannot read
CDs/DVDs
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD Player for
repair.
Menu items cannot be selected
Unable to play DivX movies
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
– Check that the DivX file is encoded with DivX 3.11,
4.x and 5.x encoder.
Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to
‘YUV’.
No sound during DivX movies playback – The audio codec may not be supported by the DVD
player.
The contents of the memory cards
cannot be read
– The memory card format is not compatible with the
player.
Slow operations of the memory cards
– Big file size or high resolution memory cards takes
longer time to read and display on theTV screen.
The memory card cannot be inserted
– Make sure the memory card is slotted correctly
before insert.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AUDIO PERFORMANCE
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
DA Converter
DVD
24 bit, 192 kHz
Number of lines
Playback
625
525
fs 96 kHz
fs 48 kHz
fs 48 kHz
fs 44.1kHz
fs 44.1kHz
4Hz- 44kHz
4Hz- 22kHz
4Hz- 22kHz
4Hz- 20kHz
4Hz- 20kHz
105 dB
100 dB
105 dB
90 dB
Multistandard (PAL/NTSC)
SVCD
VIDEO PERFORMANCE
CVBS
1Vpp — 75 ohm
CD/VCD
YPbPr
0.7Vpp — 75 ohm
Signal-Noise (1kHz)
Dynamic range(1kHz)
Crosstalk (1kHz)
Distortion/noise (1kHz)
MPEG MP3
RGB (SCART)
0.7Vpp — 75 ohm
VIDEO FORMAT
Digital Compression MPEG 2 for DVD,SVCD
MPEG 1 forVCD
MPEG Audio L3
MPEG-4/DivX
CONNECTIONS
Scart Output
YPbPr Output
Video Output
Audio Output(L+R) Cinch (white/red)
DVD
Horiz. resolution
Vertical resolution
50Hz
720 pixels
576 lines
60Hz
720 pixels
480 lines
Euroconnector
Cinch 3x
Cinch (yellow)
VCD
50Hz
60Hz
Horiz. resolution
Vertical resolution
352 pixels
288 lines
352 pixels
240 lines
Digital Output
1 coaxial, 1 optical
IEC60958 for CDDA / LPCM
IEC61937 for MPEG 1/2,
Dolby Digital
AUDIO FORMAT
Digital
MPEG/ AC-3/ compressed Digital
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
CABINET
Dimensions (w x h x d)
Weight
435 x 46 x 310 mm
Approximately 2.6 kg
MP3(ISO 9660) 96, 112, 128, 256
kbps & variable
bit rate fs, 32, 44.1,
48 kHz
POWER CONSUMPTION
Full decoding of Dolby Digital
Analog Sound Stereo
Dolby Surround compatible downmix from Dolby Digital
multi-channel sound
Power Supply Rating
Power consumption
Power consumption in Standby mode < 0.3W
220 – 230V; 50 Hz
< 14W
3D sound for virtual 5.1 channel sound on 2 speakers
Specifications subject to change without prior notice
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound has
specific numerical values. These jacks send audio
through two channels, the left and right.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image.The horizontal vs. vertical
ratio of conventionalTVs. is 4:3, and that of wide-
screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the DVD
System that send audio to another system (TV, Stereo,
etc.).
Bit Rate: The amount of data used to hold a given
length of music; measured in kilobits per seconds, or
kbps. Or, the speed at which you record. Generally,
the higher the bit rate, or the higher the recording
speed, the better the sound quality. However, higher
bit rates use more space on a Disc.
Chapter: Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is composed
of several chapters. Each chapter is assigned a chapter
number enabling you to locate the chapter you want.
ComponentVideo Out Jacks: Jacks on the back of
the DVD System that send high-quality video to aTV
that has ComponentVideo In jacks (R/G/B, Y/Pb/Pr,
etc.).
MP3: A file format with a sound data compression
system.“MP3” is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By using
MP3 format. one CD-R or CD-RW can contain about
10 times as much data volume as a regular CD can.
Multichannel: DVD is specified to have each sound
track constitute one sound field. Multichannel refers
to a structure of sound tracks having three or more
channels.
Parental Control: A function of the DVD to limit
playback of the disc by the age of the users according
to the limitation level in each country. The limitation
varies from disc to disc; when it is activated, playback
will be prohibited if the software’s level is higher than
the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can enjoy
interactive-type software as well as software having a
search function.
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles, etc
recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when you
use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL jacks.These jacks send audio through
multiple channels, instead of just two channels as
analog does.
DivX 3.11/4x/5x: The DivX codec is a patent-
pending, MPEG-4 based video compression
technology, developed by DivXNetworks, Inc., that can
shrink digital video to sizes small enough to be
transported over the internet, while maintaining high
visual quality.
Dolby Digital: A surround sound system developed
by Dolby Laboratories containing up to six channels
of digital audio (front left and right, surround left and
right, center and subwoofer).
Progressive Scan: It displays all the horizontal lines
of a picture at one time, as a signal frame. This system
can convert the interlaced video from DVD into
progressive format for connection to a progressive
display. It dramatically increases the vertical
resolution.
Region code: A system for allowing discs to be
played back only in the region designated beforehand.
This unit will only play discs that have compatible
region codes. You can find the region code of your
unit by looking on the product label. Some discs are
compatible with more than one region (or ALL
regions).
S-Video: Produces a clear picture by sending
separate signals for the luminance and the color. You
can use S-Video only if yourTV has S- video In jack.
Surround: A system for creating realistic three-
dimensional sound fields full of realism by arranging
multiple speakers around the listener.
DTS: DigitalTheatre Systems. This is a surround
sound system, but it is different from Dolby Digital.
The formats were developed by different companies.
JPEG: A very common digital still picture format.A
still-picture data compression system proposed by the
Joint Photographic Expert Group, which features small
decrease in image quality in spite of its high
compression ratio.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or the
entire album in audio software. Each title is assigned a
title number enabling you to locate the title you want.
VIDEO OUT jack: Jack on the back of the DVD
System that sends video to aTV.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Philips at the Internet
DVP762
CLASS 1
LASER PRODUCT
3139 246 13653
Sgp-SL-0433/05-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|