Philips TV VCR Combo 14PV401 User Manual

TVCR  
MO DEL NO.:  
14PV125/01, 14PV225/01  
14PV422/01  
Thank you for buying a Philips TV-Video combi. This TV-Video combi is one of the most sophisticat-  
ed and easy-to-use TV-Video combi on the market. Please take the time to read this operating manu-  
al before using your TV-Video combi. It contains important information and notes regarding operation.  
The TV-Video combi should not be turned on immediately after transportation from a cold to a  
hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transport-  
ing the device. The TV-Video combi needs this time in order to become acclimatised to its new envi-  
ronment (temperature, air humidity, etc.).  
This TV-Video combi is used for the recording and playback of VHS videocassettes.  
Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used  
with a suitable adapter.  
PAL  
We hope you enjoy your new TV-Video combi.  
These operating instructions have been  
printed on non-polluting paper.  
Important notes regarding operation  
Danger: High voltage!  
"
"
Deposit old batteries at the appropriate col-  
lection points.  
There is a risk of an electrical shock!  
The TV-Video combi does not contain any  
components that can be repaired by the  
customer. Please leave all maintenance  
work for qualified personnel.  
Please make use of the facilities available in  
your country for disposing of the packaging  
of the TV-Video combi in a way that helps to  
protect the environment.  
As soon as the TV-Video combi is connect-  
ed to the power supply, some components  
are in constant operation. To-switch off the  
TV-Video combi completely you must dis-  
connect it from the mains or switch it off with  
the main switch.  
"
This electronic device contains many materi-  
als that can be recycled. Please enquire  
about the possibilities for recycling your old  
device.  
So that you can identify your machine for service  
questions or in the event of theft, enter the serial  
number here. The serial number (PROD.NO.) is  
printed on the type plate fixed at the back of the  
device.  
Make sure that air can circulate freely  
through the ventilation slots on the TV-Video  
combi. Do not place the device on an  
unsteady base.  
!
!
Make sure that no objects or liquids enter  
the TV-Video combi. Do not place vases or  
the like on the TV-Video combi. If liquid is  
spilt into it, immediately disconnect the TV-  
Video combi from the power supply and call  
After-sales Service for advice.  
MODEL NO. : 14PV125/01, 14PV225/01  
14PV422/01  
PROD. NO.  
...........................  
This product complies with the requirements of  
Directive 73/23/EEC +89/336/EEC +93/68 EEC.  
Do not place any combustible objects on the  
device (candles, etc.).  
!
!
Make sure that children do not place any  
foreign objects within the openings or venti-  
lation slots.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front of the device  
VIDEO  
AUDIO  
P
STANDBY  
y
5
P-  
P+  
I
Standby/on: To switch TVCR on or off, interrupt menu function.  
+
Volume: In connection with the button  
,
to adjust the volume.  
Programme number minus: previous programme number  
Programme number plus: next programme number  
Record: To record the programme currently selected.  
B
Playback: To play a recorded cassette.  
C
/A  
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then  
ejected from the machine.  
When tape playback is stopped, press to fast forward the tape at hight speed.  
1
0
When tape playback is stoped, press to rewind the tape at hight speed.  
Sockets on the front:  
White socket / AUDIO input socket: To connect a camcorder or video games (audio).  
VIDEO  
Yellow socket /  
Small socket /  
input socket: To connect a camcorder or video games (video).  
socket for headphones: To connect headphones.  
Back of the set  
EXT/AV1  
Aerial input socket: To connect the aerial cable  
EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc  
Power switch: To switch the TV-Video Combi off.  
Caution: If you switch off using the power switch, TIMER-recordings are impossible!  
The control lights at the front of machine  
STANDBY  
Standby light: lights up when the TV-Video Combi has been switched on by means of the main  
switch.  
RECORD  
Recording light: lights up during recording.  
Fast blink: recording pause; timer recording not stand-by.  
Slow blink: timer recording is stored in a timer block.  
EN  
Download from Www.Somanuals.co3m. All Manuals Search And Download.  
Specifications  
Supplied accessories  
• Operating instructions  
Voltage: 220-240V/50Hz  
• Remote control and batteries  
Power consumption (Standby): less than 5W  
Rewind time: less than 260 seconds (cassette E-180)  
Number of video heads : 2  
Recording/playback time: 3 hours (SP)  
(cassette E-180), 6 hours (LP) (cassette E-180)  
Weight without packing in kg: 11.5  
Dimensions in cm (HxWxD):40.0x37.3x38.0  
Power consumption : 52W  
1. Connecting the TV-Video Combi  
3.If the little red standby light (STANDBY ) at  
the front panel of the set is not lit, please  
switch on the set using the main power  
Preparing the remote control for  
operation  
switch. The power switch  
left side panel of the set.  
4.Language setting picture will appear on the  
screen.  
is located on the  
The remote control and its batteries are packed  
separately in the original TV-Video Combi pack-  
aging. You must install the batteries in the  
remote control before use.  
WÄHLEN K L  
DEUTSCH  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
ITALIANO  
NEDERLANDS  
SVENSKA  
FORTSETZEN=MENU  
1.Take the remote control and the enclosed bat-  
teries (2 batteries).  
2.Open the remote control's battery compart-  
ment and place the batteries in it as shown in  
the picture and close the battery compartment.  
The remote control is now ready to use.  
Its range is approximately 7 metres.  
I do not see a Language setting picture  
* Check the cable connections.  
You can find more details in chapter 'Preparation  
for use'.  
Connecting additional devices  
Connecting the cable  
You can connect additional devices such as  
decoders, satellite receivers, camcorders, etc. to  
the EXT1 socket.  
1.Insert the aerial cable plug into the AERIAL at  
the back of the TV-Video Combi.  
2.Connect the mains cable to the wall socket.  
The respective scart socket is usually marked  
'
AV'  
or 'TV' on the decoder or satellite receiver.  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Important notes for operation  
Switching on  
You can switch on the TV-Video Combi with  
Navigation in the screen menu  
You can check/change many functions and set-  
tings of your TV-Video Combi via on-screen  
menu. The individual functions are selected, via  
the remote control as follows:  
STANDBY/ON y  
.
PLAY B-K  
STOP C-L  
If you press  
,
,
,
PROG P+  
,
FWD 1- B  
REW0- s  
0..9  
PROG P–  
or  
while  
,
the set is in Stand-by, the power will be auto-  
matically turned on.  
MENU  
Call up the menu: with  
.
PLAY B-K STOP C-L  
0..9  
To select: with  
.
Note that the keys  
will be inactive for  
about 5 seconds just after having switched the  
TV-Video combi off.  
To enter or change your selection: with the  
0..9  
PLAY B-K STOP C-L  
number buttons  
or with  
.
Power outage/no power  
FWD 1- B  
To save or confirm: with  
To cancel: with CLEAR .  
STATUS/EXIT  
.
Channel information remains saved for up to 10  
year, the time and timer information is saved for  
up to 1 minute.  
To end: with  
.
SELECT K L CHOOSE B  
TIMER  
PICTURE CONTROL  
RECORD SET UP  
VCR SET UP  
TUNER SET UP  
GENERAL SET UP  
END=EXIT  
EN  
Download from Www.Somanuals.co5m. All Manuals Search And Download.  
3. Installing your TV-Video Combi  
Preparation for use  
Decoder allocation  
This chapter shows you how to prepare your TV-  
Video Combi for use. The TV-Video Combi auto-  
matically seeks out and stores all available TV  
channels.  
Some TV channels transmit encoded TV signals  
which can only be viewed with a commercially  
purchased or hired decoder without distur-  
bances. You can connect such a decoder to this  
TV-Video Combi. The following function will auto-  
matically activate the connected decoder for the  
desired TV channel.  
Connecting additional devices  
After you have connected additional devices  
(satellite receiver, etc.) through the aerial cable,  
switch them on. The automatic channel search  
will recognise them and save them.  
0..9  
1.Use PROG P+  
PROG P– or  
to select the  
,
TV channel which you would like to allocate  
the decoder to.  
1.Select the desired language for the on-screen  
MENU  
2.Press  
. The main menu will appear.  
PLAY B-K STOP C-L  
menu by pressing  
.
PLAY B-K STOP C-L  
3.Use  
SET UP'. Then press  
to select 'TUNER  
MENU  
2.Press  
.
FWD 1- B  
.
3.Confirm with PROG P+ .  
The automatic TV channel search starts.  
PLAY B-K STOP C-L  
4.Use  
to select 'MANUAL  
FWD 1- B  
TUNING'. Then press  
.
PLAY B-K STOP C-L  
5.Use  
to select  
'DECODER'.  
PLEASE WAIT  
MANUAL TUNING  
START  
FINISH  
PROG.  
CHANNEL  
DECODER  
SKIP  
P55  
055  
[OFF]  
[OFF]  
→→→→→→→→→→→→→→→→→→→→→→  
<14PV 225>  
4.'TIME' and 'DATE' will appear on the TV  
SELECT K L CHOOSE B  
END=EXIT  
screen.  
FWD 1- B  
6.Use  
to select 'ON'  
TIME --:--  
(Decoder switched on).  
DATE --/--/--  
How can I switch off the decoder?  
FWD 1- B  
Use  
to select 'OFF' (Decoder  
SMART CLOCK [ON]  
switched off).  
END=EXIT  
STATUS/EXIT  
7.To end, press  
.
The decoder has now been allocated to this TV  
channel.  
5.Check 'TIME'. If required, please change the  
0..9  
time with the number buttons  
.
6.Check if the displayed settings for 'DAY',  
'MONTH' and 'YEAR' are correct.  
7.When all information is correct, save by  
STATUS/EXIT  
pressing  
.
The preparation for use is now complete.  
Satellite receiver  
If you are connecting a satellite receiver, please  
read the section 'Using the satellite receiver'.  
Decoder  
If you are connecting a decoder, you must  
install it as described in the next section.  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual TV channel search  
Using the satellite receiver  
In some cases it can occur that all TV channels  
are not found and saved during the first installa-  
tion. In this case, the missing TV channels must  
be searched for and stored manually.  
You can receive channels from the satellite  
AV1/EXT1  
receiver via the scart socket  
.
To do this, select the channel number 'AV1' by  
0..9  
pressing 0,0,1, with the keys  
on the remote  
MENU  
1.Press  
. The main menu will appear.  
control.You will have to select the channel you  
want to receive on the satellite receiver itself.  
PLAY B-K  
2.Select 'TUNER SET UP' with  
STOP C-L  
FWD 1- B  
and confirm with  
.
PLAY B-K  
3.Select 'MANUAL TUNING' with  
Automatic Tuning  
STOP C-L  
FWD 1- B  
.
and confirm with  
During installation, all available TV channels are  
searched for and saved. If the channel assign-  
ments of your cable or satellite TV provider  
change or if you are reinstalling the TV-Video  
Combi, e.g. after moving house, you can start  
this procedure again. This will replace the TV  
channels already saved with the new ones.  
MENU  
PLAY B-K STOP C-L  
4.Select 'PROG.' with  
. Then  
FWD 1- B  
.
press  
MANUAL TUNING  
PROG.  
CHANNEL  
DECODER  
SKIP  
P55  
055  
[OFF]  
[OFF]  
1.Press  
. The main menu will appear.  
PLAY B-K  
2.Select 'TUNER SET UP' with  
SELECT K L CHOOSE B  
STOP C-L  
FWD 1- B  
and confirm with  
.
END=EXIT  
PLAY B-K  
3.Select 'AUTO TUNING' with  
STOP C-L  
FWD 1- B  
, and confirm with  
.
PLAY B-K STOP C-L  
0..9  
5.With  
, select the  
or  
desired programme number that you want to  
use for the TV channel, e.g. 'P01'. Then press  
FWD 1- B  
.
PLEASE WAIT  
START  
What is a special channel?  
TV channels are transmitted in certain pre-defined  
frequency ranges. These ranges are divided into  
channels.  
FINISH  
→→→→→→→→→→→→→→→→→→→→→→  
A specific frequency/channel is assigned to each  
TV station.  
Certain frequency ranges are specified as special  
channels (hyperband channels).  
4.The automatic TV channel search starts. This  
allows the TV-Video Combi to save all avail-  
able TV channels. This procedure may take  
several minutes.  
5.When the TV channel search is complete,  
'AUTO TUNING COMPLETED' will briefly  
appear on the TV screen.  
PLAY B-K STOP C-L  
6.Select 'CHANNEL' with  
,
FWD 1- B  
and confirm with  
. Then enter the  
0..9  
desired channel with  
.
When a channel is found,it will stop searching. If  
FWD 1- B  
this is the channel you want, press  
. If  
'
'
you set SKIP on for a channel, this channel will  
be ignored when going through the channels  
PROG P+  
PROG P–  
with  
or  
.
To search for other TV channels, begin again at  
step 4.  
I don't know the channels for my TV stations  
PLAY B-K STOP C-L  
In this case, press  
in 'CHAN-  
NEL' to start the automatic channel search. A  
changing channel number will appear on the TV  
screen. Continue the automatic search until you  
have found the desired TV channel.  
STATUS/EXIT  
7.To end, press  
.
EN  
Download from Www.Somanuals.co7m. All Manuals Search And Download.  
PLAY B-K STOP C-L  
3.Select 'LANGUAGE' with  
Sorting and clearing TV channels  
manually  
FWD 1- B  
and confirm with  
.
SELECT K L  
You can use this function to individually sort the  
TV channels already saved or to delete unwant-  
ed TV channels or those with poor reception.  
DEUTSCH  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
ITALIANO  
The clock resets automatically  
NEDERLANDS  
If you save a TV channel that transmits TXT/PDC  
on programme number ‘P01’, date and time will  
and constantly be updated. As a result, time  
changes, i.e. daylight savings time, will be set  
automatically.  
SVENSKA  
END=EXIT  
PLAY B-K  
4.Select the desired language with  
STOP C-L  
.
STATUS/EXIT  
5.To end, press  
.
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K  
2.Select 'TUNER SET UP' with  
Setting the clock  
STOP C-L  
FWD 1- B  
and confirm with  
.
PLAY B-K STOP C-L  
3.Select 'MOVE' with  
confirm with  
, and  
If the display shows an incorrect time or ' --:-- '  
the time and date must be reset manually.  
MENU  
FWD 1- B  
.
1.Press  
. The main menu will appear.  
MOVE  
PLAY B-K  
2.Select 'GENERAL SET UP' with  
P01: 02  
P02: 03  
P03: 05  
P04: 10  
P05: 74  
P06: 90  
P07: 99  
P08: 121  
P09: 124  
P10: 130  
STOP C-L  
FWD 1- B  
and confirm with  
.
PLAY B-K STOP C-L  
3.Select 'CLOCK' with  
confirm with  
and  
FWD 1- B  
.
SELECT K L CHOOSE B  
END=EXIT  
TIME --:--  
DATE --/--/--  
PLAY B-K STOP C-L  
4.With  
, select the saved TV  
channel that you want to move.  
SMART CLOCK [ON]  
FWD 1- B  
5.Confirm with  
.
PLAY B-K  
6.Move the selected channel with  
END=EXIT  
STOP C-L  
to the programme number you want  
to assign.  
Then pless  
ber will change to '_ _'  
7.Confirm with  
8.To assign other TV channels to a programme  
number, repeat steps 4 to 7.  
9.Confirm the assignment of the TV channel  
4.Check the time in 'TIME'. If required, please  
FWD 1- B  
. The programme num-  
.
0..9  
change the time with  
.
5.Check 'DAY', 'MONTH' and 'YEAR' in the  
same way.  
(Choose 'SMART CLOCK' ON or OFF with  
FWD 1- B  
FWD 1- B  
. [14PV225])  
STATUS/EXIT  
6.To end, press  
.
with  
.
MOVE menu  
STATUS/EXIT  
10.To exit the  
, press  
MOVE menu  
Time/date is displayed incorrectly despite  
manual setting  
.
* With Smart Clock, if you save a TV channel  
that transmits TXT/PDC on programme num-  
ber 'P01', date and time will automatically be  
Setting the language  
You have the option of setting one of the dis-  
played languages for the on-screen menu (OSD).  
updated when the TV-Video Combi is in  
.
Stand-  
by  
If you wish to switch this automatic time cor-  
rection off, select 'OFF' for Smart Clock. You  
can reactivate this function at any time by  
selecting Smart Clock 'ON'.  
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K  
2.Select 'GENERAL SET UP' with  
STOP C-L  
FWD 1- B  
and confirm with  
.
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. TV SET FUNCTIONS  
PLAY B-K STOP C-L  
3.Select an item using  
, and  
Selecting a TV channel  
REW0- s  
FWD 1- B  
then modify with  
.
Select the desired TV channel (= the programme  
SELECT K L ADJUSTE s  
B
/
0..9  
number) with PROG P+ , PROG P– or with  
on the remote control.  
BRIGHTNESS  
CONTRAST  
COLOUR  
SHARPNESS  
TINT  
<
<
<
<
<
>
>
>
>
>
Selection of the scart socket  
To select the Scart socket, please enter 0,0,1,  
END=EXIT  
0..9  
with the keys  
on the remote control. AV1  
appears on the screen.  
STATUS/EXIT  
4.To end, press  
.
'TINT' appears only when receiving NTSC sig-  
nals from another source.  
Selection of the front A/V sockets  
To select the front A/V sockets, please enter  
How do I read TELETEXT? [14PV225]  
0..9  
0,0,2, with the keys  
on the remote control.  
'AV2' appears on the screen.  
Many TV channels transmit TELETEXT informa-  
tion along with their TV channels. With this TV-  
Video Combi you can retrieve this information  
and display it on the screen using the built-in  
TELETEXT decoder.  
Volume control  
You can adjust the volume using VOL5+ ,  
VOL5on the remote control.  
1.Press  
to switch the TELETEXT decoder  
on. Your TV-Video Combi will now show  
TELETEXT for the TV channel you have  
If you would like to change the volume on the  
machine, press 5or 5+ on the TV-Video  
Combi.  
selected. Press  
again to show TELE-  
TEXT in transparent mode.  
2.If you want to select another page, type in the  
number of the page with the number buttons  
If you want to mute the sound temporarily  
MUTE  
(e.g.:during a telephone call), press  
the remote control. When you press  
on  
0..9  
on the remote control.  
MUTE  
With the colour buttons on your remote control  
you can directly select the page numbers  
shown at the bottom of the TV screen.  
again, the sound will return at its original vol-  
ume level.  
The button  
page.  
takes you back to the start  
Picture settings  
3.Press  
off.  
to switch the TELETEXT decoder  
The picture can be adjusted according to your  
personal preferences.  
These settings are automatically stored after  
exiting the main menu.  
Special TELETEXT functions  
[14PV225]  
MENU  
1.Press the  
. The main menu will appear.  
In TELETEXT mode you can use the special  
TELETEXT functions.  
o
PLAY B-K  
2.Select 'PICTURE CONTROL' with  
STOP C-L  
FWD 1- B  
and confirm with  
..  
l
p
: enlarge font  
: select TELETEXT sub-page  
: recall hidden information  
p
l
o
: stop page changes  
: go back to start page  
EN  
Download from Www.Somanuals.co9m. All Manuals Search And Download.  
The maximum time period to be set until switch-  
off is 2 hours.  
Switch-off function (SLEEP TIMER)  
You can programme your set to switch-off auto-  
matically after a predetermined period.  
1.Press SLEEP .  
If you would like to turn this function off, press  
SLEEP  
on the remote control several times until  
2.Press SLEEP repeatedly to extend the time until  
switch-off in 30 minute increments.  
The screen will show the time remaining until  
switch-off, e.g.: '+0:30'.  
The machine now counts backwards to the switch-  
off time.  
switch-off appears. '--:--' will appear on the  
screen.  
To check the time until switch-off, press  
on the remote control.  
If a recording is in process, switch-off function  
will be cancelled.  
SLEEP  
5. Playback  
Playing cassettes  
Playing back NTSC cassettes  
You can use this TV-Video Combi to playback  
recorded VHS video cassettes. You can operate  
the TV-Video Combi using the remote control or  
the buttons on the set.  
Cassettes that have been recorded in the NTSC  
standard (for example, American cassettes) can  
be played back using this TV-Video Combi.  
Your TV-Video Combi can only record and play  
standard VHS cassettes.  
Searching for a tape position with  
1.Put a cassette into the cassette slot. The cas- picture (scanning)  
sette is inserted automatically.  
REW0- s  
1.While a cassette is playing, press  
FWD 1- B  
(reverse) or  
times.  
2.Press  
(forward) one or more  
DIGITAL STUDIO PICTURE CONTROL  
Philips has developed a system which produces  
the best possible playback quality. For old and  
often-used video cassettes, this system reduces  
interference. For new or high quality cassettes,  
it emphasises the details.  
PLAY B-K  
to resume playback.  
Still picture  
Picture/ sound quality is poor  
STILL 2  
1.During playback, press  
tape and display a still picture.  
2.To continue playback, press  
Scanning and still motion interferes with the pic-  
ture quality. The sound is switched off. This is not  
a fault in your TV-Video Combi.  
to stop the  
When playing rental videos or older, poorer  
quality cassettes, it may not be possible to com-  
pletely filter out picture and sound interference.  
This is not a fault in your machine. Read the  
section 'Manual tracking'.  
PLAY B-K  
.
PLAY B-K  
2.Press  
to view the tape.  
STOP C-L  
3.To stop the playback, press  
or  
Searching for tape position without  
picture (forward wind and rewind)  
STOP C-L  
STOP/EJECT on the TV-Video Combi.  
EJECT A  
4.To eject the cassette, press  
or  
1.Stop the tape with  
.
STOP/EJECT when the TV-Video Combi stops  
the playback.  
REW0- s  
FWD 1- B  
2.Press  
(reverse) or  
(forward).  
STOP C-L  
3.To stop the tape, press  
.
Do I need to change the playback speed  
when playing back LP recordings?  
During playback, the correct speed will automati-  
cally be selected. For more information, please  
read the section 'Selecting the recording speed  
(SP or LP)' in the chapter 'Manual recording'.  
Manual Tracking  
To adjust the tracking manually, press P+ or  
P-  
.
on the TV-Video Combi during playback  
Tracking returns to Automatic Tracking  
STOP C-L  
Adjustment when you press  
or insert a  
tape.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Manual recording  
General information  
Lining up recordings (assemble cut)  
When you add a further recording to a cassette,  
which already has a recording on it, a short  
blank (flicker) can appear between the old and  
the new recording or the picture itself can flicker.  
To help reduce these from occurring, proceed as  
follows:  
Use 'Manual Recording' to make a sponta-  
neous recording (for example, a programme cur-  
rently being shown).  
If you want to start and stop a recording manual-  
ly, read the section 'Recording without auto-  
matic switch-off'.  
1.Find the tape position of the old recording  
where you want to insert the new recording.  
2.Look at the last minute of the old recording  
(playback).  
If you want to start a recording manually but  
have it stopped automatically, read the section  
'Recording with automatic switch-off'. (e.g.  
not to record to the end of the tape)  
STILL 2  
3.Press  
at the tape position where  
Read the section 'Automatic recording from a  
satellite receiver', if you want a recording to be  
controlled automatically by a satellite receiver.  
the new recording is to go and press REC I .  
4.Now start recording as usual by pressing  
REC I on the remote control.  
Recording without automatic  
switch-off  
STOP C-L  
5.Stop recording with  
.
Selecting the recording speed (SP  
or LP)  
1.Insert a cassette.  
2.Use PROG P+ PROG P– or  
programme number you want to record, for  
example, 'P01'.  
0..9  
to select the  
LP allows to double the recording duration on tape  
(for example six hours instead of three hours on a  
E180 cassette).  
3.To start recording, press REC I .  
STOP C-L  
4.To stop recording, press  
.
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K  
2.Select 'RECORD SETUP' with  
Recording with automatic switch-off  
(OTR One-Touch-Recording)  
STOP C-L  
.
3.Select the required recording speed with  
FWD 1- B  
.
1.Insert a cassette.  
0..9  
2.Use PROG P+  
PROG P– or  
to select the  
SELECT K L CHOOSE B  
programme number you want to record.  
RECORD SPEED  
[SP]  
3.Press REC I .  
4.Each time you press REC I you will add 30  
minutes to the recording time.  
STOP C-L  
5.To stop recording, press  
.
END=EXIT  
Preventing accidental erasing  
STATUS/EXIT  
4.To end, press  
'SP'/'LP'  
.
All cassettes (except  
rental and pre-recorded  
cassettes) have a secu-  
'SP': StandardPlay (normal recording speed) offers  
the usual first-class picture quality.  
rity tab on the back of  
the cassette.  
'LP': LongPlay (half recording speed, double  
recording time). 6 hours can be recorded on a 3-  
hour cassette (E180) with a somewhat reduced  
picture quality.  
To prevent recording  
over important recordings (erasing), you can  
remove this security tab.  
If you later decide to record on a protected cas-  
sette, simply cover the hole with adhesive tape  
or slide the tab to the right.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Programming a recording (TIMER)  
General information  
Programming a recording  
Use a TIMER programming to automatically start  
and stop a recording at a later time or date. The  
TV-Video Combi will switch to the right pro-  
gramme number and begin recording at the cor-  
rect time. With this TV-Video Combi, you can  
pre-programme up to eight recordings within a  
period of one year. To make a programmed  
recording, your TV-Video Combi needs to know:  
*the date you want to make the recording  
*the programme number of the TV channel  
*the start and stop time of the recording  
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K STOP C-L  
2.Select 'TIMER' with  
. Then  
FWD 1- B  
press  
.
3.Select ONCE, DAILY, or WEEKLY recording  
PLAY B-K STOP C-L  
with  
. Then press  
FWD 1- B  
.
SELECT K L CHOOSE B  
ONCE  
DAILY  
WEEKLY  
TIMER LIST  
*VPS or PDC on or off [14PV225]  
This information is saved in a TIMER block.  
END=EXIT  
[14PV225]  
What is 'VPS/PDC'?  
If all TIMER blocks are in use, 'FULL' will appear  
'VPS' (Video Programming System)/ 'PDC'  
(Programme Delivery Control) are used to con-  
trol the start and duration of TV channel record-  
ings. If a TV programme starts earlier or ends  
later than scheduled, the TV-Video Combi will  
turn on and off at the correct time.  
on the TV screen.  
4.Select the desired TIMER block with  
0..9  
.
Selecting once/daily/weekly recordings  
PLAY B-K STOP C-L  
Use  
to select from the fol-  
lowing options:  
What do I need to know about 'VPS/PDC'?  
Usually the VPS or PDC time is the same as  
the start time. But if your TV guide shows a  
VPS or PDC time which is different from the  
programme’s scheduled start time, e.g. 20.10  
(VPS/PDC 20.14), you must enter the VPS/PDC  
time exact to the minute. If you want a start time  
different from the VPS/PDC time, you must  
switch VPS/PDC off.  
'ONCE': Recording once  
'DAILY': Repeated daily recordings from  
Monday to Friday  
'WEEKLY': Repeated weekly recordings (every  
week on the same day)  
5.Enter the Start time (START) End time  
(STOP), Programme number (PROG.),  
VPS/PDC information and the Date with  
0..9  
.
Programming a recording from the external  
sources  
You can also programme recording from an  
external source via the Scart socket AV1 or the  
front A/V connectors AV2.  
6.When all inputs are correct, press  
STATUS/EXIT  
. The programming information  
is stored in a TIMER block.  
7.Insert a cassette with an intact security tab  
(unprotected).  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to check, change or delete a  
programmed recording (TIMER)  
How to change a programmed  
recording (TIMER)  
MENU  
MENU  
1.Press  
. The main menu will appear.  
1.Press  
. The main menu will appear.  
PLAY B-K STOP C-L  
PLAY B-K STOP C-L  
2.Select 'TIMER' with  
. Then  
2.Select 'TIMER' with  
. Then  
FWD 1- B  
FWD 1- B  
press  
.
press  
.
PLAY B-K STOP C-L  
3.Select ONCE, DAILY, or WEEKLY recording  
3.Select 'TIMER LIST' with  
,
PLAY B-K STOP C-L  
FWD 1- B  
with  
. Then press  
and confirm with  
.
FWD 1- B  
.
SELECT K L CHOOSE B  
0..9  
4.Select a TIMER block with  
. (The flashing  
ONCE  
DAILY  
number indicates an empty TIMER block.)  
WEEKLY  
TIMER LIST  
ONCE  
TIMER - 1 2 3 4 5 6 7 8 -  
END=EXIT  
SELECT TIMER NUMBER  
END=EXIT  
FWD 1- B  
4.Select timer block with  
5.To cancel the recording, press  
STATUS/EXIT  
.
CLEAR  
.
6.To end, press  
.
CLEAR  
5.Press  
to delete information, and  
0..9  
input correct information with  
.
STATUS/EXIT  
6.To end, press  
.
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Other functions  
STATUS/EXIT  
5.To end, press  
6.Insert a cassette.  
7.Start the continuous playback with  
.
Switching the status display off or  
on  
PLAY B-K  
.
Your TV-Video Combi will automatically rewind and  
start playing the tape from the begining when it rec-  
ognizes a non-recorded part longer 10 seconds.  
Along with the on screen menu, the status dis-  
play also displays information on the current  
operating status (counter, playback, recording,  
TV channel, etc.) on the TV screen.  
Blue Background on or off  
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K  
2.Select 'VCR SET UP' using  
If you want the TV screen to be solid blue when  
a weak signal is received, set BLUE BACK-  
GROUND to ‘ON’. The screen will be blue and  
the sound will be muted. Or, if you want to  
receive the weak signal, set BLUE BACK-  
GROUND to ‘OFF’.  
STOP C-L  
FWD 1- B  
and confrim with  
.
PLAY B-K  
3.Select 'STATUS DISPLAY' with  
STOP C-L  
.
SELECT K L CHOOSE B  
REPEAT PLAY  
STATUS DISPLAY  
BLUE BACKGROUND[ON]  
[ON]  
[ON]  
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K  
2.Select 'VCR SET UP' using  
STOP C-L  
FWD 1- B  
and confrim with  
.
PLAY B-K  
3.Select 'BLUE BACKGROUND' with  
END=EXIT  
STOP C-L  
.
FWD 1- B  
4.Select 'ON' or 'OFF' with  
.
SELECT K L CHOOSE B  
Which settings can I choose?  
'ON': Shows the status display for a few sec-  
onds only.  
REPEAT PLAY  
STATUS DISPLAY  
BLUE BACKGROUND [ON]  
[ON]  
[ON]  
'OFF': Switches off the status display.  
STATUS/EXIT  
5.To end, press  
.
END=EXIT  
Continuous playback  
4.Select 'OFF' (no blue background) or 'ON'  
FWD 1- B  
(blue background on) with  
.
This function can be used to play a cassette  
over and over again. When the end of the cas-  
sette is reached, it will rewind and start from the  
beginning again. This function is activated or  
deactivated as follows.  
STATUS/EXIT  
5.To end, press  
.
Parental control (Child lock)  
This function protects your TV-Video Combi from  
unwanted use. All button functions on the front of  
the machine are blocked.  
Programmed recordings will still be recorded (in  
spite of the parental control) and cannot be  
interrupted.  
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K  
2.Select 'VCR SET UP' using  
STOP C-L  
FWD 1- B  
and confirm with  
.
PLAY B-K  
3.Select 'REPEAT PLAY' with  
STOP C-L  
.
SELECT K L CHOOSE B  
MENU  
1.Press  
. The main menu will appear.  
PLAY B-K STOP C-L  
2.Use  
to select 'GENERAL  
REPEAT PLAY  
STATUS DISPLAY  
BLUE BACKGROUND[ON]  
[ON]  
[ON]  
FWD 1- B  
SET UP'. Then press  
.
PLAY B-K STOP C-L  
3. Use  
to select 'CHILD  
LOCK'.  
FWD 1- B  
4. Use  
to select 'ON'.  
END=EXIT  
'If a button at the front of the machine is pressed  
while parental control is active, ’CHILD LOCK  
ACTIVE’ will appear on the screen for a few sec-  
onds.  
FWD 1- B  
4.Select 'ON' with  
.
If you select 'OFF', continuous playback will be  
switched off.  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Before you call an engineer  
If, contrary to expectation, you have any prob-  
lems using this TV-Video Combi, it may be  
caused one of the following reasons.  
No recording possible  
*The TV channel you want to record is not  
stored or you have selected the wrong pro-  
gramme number: check TV channels stored.  
*A cassette was inserted that does not have the  
security tab (cannot be used to record): Insert  
a cassette with an intact security tab or  
change cassette. For more information, please  
see the section ‘Preventing accidental erasing’  
in chapter ‘Manual Recording’.  
Your TV-Video Combi does not respond to  
any button being pressed:  
*There is no power supply: check the power  
supply.  
*Parental control is on:switch the parental con-  
trol off.  
*There is a technical problem: disconnect from  
the mains power supply for 5 minutes, then  
power-up again.  
[14PV225]  
*’VPS/PDC’ switched on but ‘VPS/PDC time’  
wrong: enter ‘VPS/PDC time’ exactly to the  
If this doesn't help, you can reset your TV-Video  
Combi to the default factory settings.  
minute. Check your aerial connection.  
Resetting devices to default factory settings  
*Warning: All the information stored (TV chan-  
nels, time and date, TIMER) will be cleared.  
1.Switch the TV-Video Combi to stand-by.  
2.Press and hold REC I and PROG P+ at the  
same time for 2 seconds or more.  
Smart Clock does not work  
*You have stored on programme number ‘P01’ a  
TV channel that does not transmit TELETEXT.  
Store on ‘P01’ a TV channel that transmits  
TELETEXT.  
*Poor TELETEXT reception. Store a TV channel  
on ‘P01’ with good TELETEXT reception.  
*You have not activated the Smart Clock func-  
tion. Switch the function ‘ON’.  
A cassette is jammed in the TV-Video Combi  
*Don’t use force. Disconnect the set from the  
mains and reconnect it again after a few sec-  
onds.  
You can also call the customer service centre  
in your country.The telephone numbers can be  
found on the back of this instruction manual.  
Have the model number (MODEL NO) and the  
production number (PROD.NO.) of your TV-  
Video Combi ready.  
Remote control does not work  
*Remote control is not pointed at the TV-Video  
Combi.  
*Take out the batteries, wait for 10 seconds and  
place them back in the remote control.  
*Batteries have run out. Change the batteries.  
No picture when you play a cassette  
*There is no recording on the cassette.  
Poor picture quality when you play a cas-  
sette  
*The cassette is badly worn-out or of poor qual-  
ity. Use a new cassette.  
*Tracking is not properly adjusted. Turn to sec-  
tion ‘Manual Tracking’.  
*Magnetism from nearby appliances and geo-  
magnetism might affect the colour of the TV  
picture. Move the TV-Video combi away from  
such sources. The TV-Video combi will readjust  
itself automatically. If you want to initiate an  
immediate readjustment, unplug the TV-Video  
combi from the mains and plug it in again  
approximately 30 minutes later.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILIPS NORGE AS  
Sandstuveien 70,  
PO Box 1, Manglerud  
N-0612 Oslo  
PHILIPS AUSTRIA GMBH  
Triesterstrasse 64  
1101 Wien  
AUSTRIA  
Tel: 0810 001 203  
PHILIPS PORTUGUESA, S.A.  
Consumer Information Centre  
Rua Dr. António Loureiro Borge, nr. 5  
Arquiparque, Miraflores  
P-2795 L-A-VEHLA  
NORWAY  
Phone: 2274 8250  
PORTUGAL  
Phone: 021-4163063  
OY PHILIPS AB  
Sinikalliontie 3,  
02630 Espoo  
PHILIPS INFO CENTER  
Alexanderstrasse 1  
20099 Hamburg  
PHILIPS CE, The Philips Centre,  
420 - 430 London Road,  
Croydon, Surrey  
FINLAND  
GERMANY  
CR9 3 QR  
puh. 09 615 80 250  
Tel: 0180-53 56 767  
UNITED KINGDOM  
Phone: 0208-665-6350  
PHILIPS KUNDTJÄNST SERVICE CONSOMMATEURS PHILIPS  
PHILIPS KUNDECENTER  
Frederikskaj 6,  
1780 København V  
DANMARK  
Knarrarnäsgatan 7  
Kista  
164 85 Stockholm  
SWEDEN  
BP 0101  
75622 Paris Cédex 13  
FRANCE  
Phone: 0825-889 789  
Tlf.: 80 88 28 14  
Tel: (0)8 598 52 250  
PHILIPS POLSKA  
Al. Jerozolimskie 195B  
02-222 Warszawa  
POLSKA  
PHILIPS ELECTRONICS IRELAND LIMITED  
Consumer Information Centre  
Newstead, Clonskeagh  
PHILIPS REPRESENTATION OFFICE  
Ul. Usacheva 35a  
119048 MOSCOW  
DUBLIN 14  
RUSSIA  
TEL.: (022)-571-0-571  
Phone: 01-7640292  
Phone: 095-937 9300  
PHILIPS CONSUMER ELECTRONICS  
Servizio Consumatori  
Via Casati 23  
20052 Monza - Milano  
ITALY  
PHILIPS INFO CENTER  
Fegistrasse 5  
8957 Spreitenbach  
SUISSE  
Tel.: 0844-800 544  
Phone: 800 820026  
PHILIPS Iberia, S.A.  
C/Martinez Villergas, 49  
28027 MADRID  
PHILIPS MAGYARORSZÁG KFT.  
Fehérvári út 84/a.  
Budapest 1119  
PHILIPS CUSTOMER CARE CENTER  
Twee Stationsstraat 80/  
80 Rue des Deux Gares  
SPAIN  
Phone: 902-11 33 84  
HUNGARY  
Phone: (01)-382-1700  
1070 BRUSSEL/BRUXELLES  
BELGIUM (for BENELUX)  
Tel: 070-222303  
PHILIPS CONSUMENTENLIJN  
Postbus 102 5600 AC Eindhoven  
NEDERLAND  
Tel.: 0900-8406  
310? ??? ????  
0EMN0---- / T6410/T6510EZ*****  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentax Digital Camera Optio S5i User Manual
Petsafe Pet Fence In Ground Fence Kit User Manual
Philips Car Satellite TV System 40PFL4709 User Manual
Philips Computer Monitor 107T70 User Manual
Philips Sprinkler HP6490 User Manual
Philips TV VCR Combo CCZ092AT User Manual
Pioneer Car Stereo System S P160 User Manual
Poulan Lawn Mower XC1182B User Manual
Poulan Trimmer 545186849 User Manual
ProForm Home Gym PFEL45012 User Manual