TV/DVD
Directions for Use
Important!
Return your
Warranty
Need help?
Call us!
Registration Card
Philips representatives are ready to help you with any ques-
within 10 days.
See why inside.
tions about your new product. We can guide you through
Connections, First-time Setup, or any of the Features.
We want you to start enjoying your new product right away!
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT.
1-800-531-0039
or
Visit us on the web at
3139 125 31441
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
B. Objects have fallen, or liquid has been spilled into the appli-
ance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
7. Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
• Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could ulti-
mately overturn the product.
• Also, do not endanger yourself, or children, by placing electron-
ic equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product dam-
age and/or personal injury.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and third ground-
ing prong. The wide blade or third prong are provided for your
safety. When the provided plug does not fit into your outlet, con-
sult an electrician for replacement of the obsolete outlet.
18. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
10. Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connect-
ed to the receiver, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built up static
charges.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
aratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-
1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding connectors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
21. Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
16. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS - Read before operating equipment
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the
receiver.
3) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for
help.
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equip-
ment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any
unauthorized changes or modifications to this equipment void the
user’s authority to operate it.
Laser Safety
This unit employs a laser. Only a qualified service person should
remove the cover or attempt to service this device, due to possible
eye injury.
WARNING
To reduce the risk of fire or electric shock, do not expose this appli-
ance to rain or moisture.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK DEFEATED. DO NOT
STARE INTO BEAM. THE BEAM IS LOCATED INSIDE,
NEAR THE DECK MECHANISM.
CAUTION
Use of controls or adjustments or performance of procedures other
than herein may result in hazardous radiation exposure.
The set complies with the FCC-Rules, Part 15 and with 21 CFR
1040.10.
Copyright Protection
Unauthorized copying, broadcasting, public performance and lending
of Discs are prohibited.
Special Information for Canadian Users
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
Radio Interference Regulations of the Canadian Department of
Communications.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intel-
lectual property rights owned by Macrovision Corporation and
other rights owners.
Use of this copyright protection technology must be authorized by
Macrovision Corporation and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Radio/TV Interference
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
Declaration of Conformity
Trade Name:
Philips
Responsible Party: Philips Consumer Electronics North America
P.O. Box 14810
Knoxville, TN 37914-1810
(865) 521-4316
LASER
Type
Wave length
NOTE: PICTURES SHOWN MAYBE
InGaIp/AlGaAs
650 nm (DVD)
790 nm (VCD/CD)
7 mW (DVD)
7 mW (VCD/CD)
28º (DVD)
DIFFERENT BETWEEN COUNTRIES.
NEVER MAKE OR CHANGE CON-
NECTIONS WITH THE POWER
SWITCHED ON.
Output Power
Beam divergence
CAUTION
32º (VCD/CD)
VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AVOID
EXPOSURE TO BEAM (WARNING
LOCATION: INSIDE ON LASER COV-
ERSHIELD OR THE BACKPLATE OF
SET)
CLASS 1
LASER PRODUCT
The region code for
this set is ALL or 1.
DVDs must be labeled
ALL
1
for ALL regions or for Region 1 in order
to play on this TV/DVD Player. You can
not play Discs that are labeled for other
regions. Look for the symbols above on
your DVDs. If these region symbols do
not appear on your DVDs, you can not
play the DVD in this TV/DVD Player.
LASER SAFETY
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to serv-
ice this device.
This product incorporates copyright protec-
tion technology that is protected by method
claims of certain U.S. patents and other
intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse engi-
neering or disassembly is prohibited.
USE OF CONTROLS OR ADJUST-
MENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIA-
TION EXPOSURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Operating the DVD Player
Operating the DVD Player - Basic Operation . . . . . .30
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Disc Types and Disc Cleaning . . . . . . . . . . . . . . . . . . . . . . . . .6
Operating the DVD Player - Menu Bar Operation . . . . . . . .31
User Preference Settings - Picture . . . . . . . . . . . . . . . . . . . . .32
User Preference Settings - Sound . . . . . . . . . . . . . . . . . . . . .33
User Preference Settings - Language . . . . . . . . . . . . . . . . . . .34
User Preference Settings - Features . . . . . . . . . . . . . . . . . . . .35
User Preference Settings - Access Code . . . . . . . . . . . . . . . .36
Playing a Disc - Authorizing/Deauthorizing a Disc . . . . . . .37
Playing a Disc - Playing a DVD or a Video CD . . . . . . . . . .38
General Features - Moving to Another Title or Track . . . . . .39
General Features - Moving to Another Chapter or Index . . .39
General Features - Search Forward or Reverse . . . . . . . . . . .40
General Features - Still Picture/Picture by Picture Playback .40
General Features - Repeat/Repeat A-B . . . . . . . . . . . . . . . . .41
General Features - Time search . . . . . . . . . . . . . . . . . . . . . . .42
General Features - Enlarge Picture (Zoom) . . . . . . . . . . . . . .42
General Features - Favorite Track Selection - Video . . . . . .43
General Features - Erasing a Favorite Track Selection . . . . .44
Special Features - Title/Chapter/Disc Menus . . . . . . . . . . . .45
Special Features - Camera Angle . . . . . . . . . . . . . . . . . . . . . .45
Special Features - Audio Language . . . . . . . . . . . . . . . . . . . .46
Special Features - Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .46
Special Video CD Feature - Playback Control (PBC) . . . . . .47
Playing Audio CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-48
Install Menu
How to use the Language Control . . . . . . . . . . . . . . . .7
How to use the Tuner Mode Control . . . . . . . . . . . . . . . . . . . .8
How to Automatically Program Channels . . . . . . . . . . . . . . . .9
How to Add or Delete Channels . . . . . . . . . . . . . . . . . . . . . .10
Picture Menu
How to use the Picture Adjustment Controls . . . . . .11
Sound Menu
How to Use the Sound Adjustment Controls . . . . . .12
Features Menu
How to Use the Timer Controls . . . . . . . . . . . . . . . . .13
Using the Format Control . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Understanding the AutoLock™ Controls . . . . . . . . . . . . . . .15
Setting up the AutoLock™ Access Code . . . . . . . . . . . . . . . .16
How to Block Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
How to Clear All Blocked Channels at the Same Time . . . .18
How to Block All Channels at the Same Time . . . . . . . . . . .19
Blocking Programming Based on Movie Ratings . . . . . . . . .20
Blocking Programming Based on TV Ratings . . . . . . . . . . .21
Other AutoLock™ Blocking Options . . . . . . . . . . . . . . . . . .22
How to Use the Active Control . . . . . . . . . . . . . . . . . . . . . . .23
General Information
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . .49
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Remote Control Use
Setting the Sleeptimer Control . . . . . . . . . . . . . . . . .24
How to use the Closed Captioning Control . . . . . . . . . . . . . .25
Setting the SmartPicture™ Control . . . . . . . . . . . . . . . . . . . .26
Setting the SmartSound™ Control . . . . . . . . . . . . . . . . . . . .27
Using the QuadraSurf™ Buttons (Alternate Channel) . . .28-29
Remote Use with Accessory Devices (Direct Method) . . . . .28
NOTE: It is possible that this owner's manual may be used
with several different television models. Not all features
(and drawings) discussed in this manual will necessarily
match those found with your television system. This is nor-
mal and does not require you contacting your dealer or
requesting service.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Active Control™ continuously measures and corrects all
Playable Disc Types
incoming signals to help provide the best picture quality. This
feature monitors and corrects both the sharpness control and
noise reduction control.
This DVD Player will play Digital Video Discs (DVDs), Audio
CDs, CD-Rs and CD-RW discs. In order to play a DVD or Audio
CD on this DVD Player, make sure the Disc meets the require-
ments for the Region Code as described on page 4.
Audio/Video Jack Panel allows direct connections with acces-
sory devices, providing quality TV picture and sound playback.
The Discs should contain the logos shown below and meet the
standards listed for each.
Audio Volume Leveler (AVL) Control keeps the TV sound at
an even level. Peaks and valleys in volume that occur during
program changes or commercial breaks are reduced, making for
a more consistent, comfortable sound.
Disc
Maximum
Playback Time
Disc
Segments
Logo Contents Disc Size
Type
AutoLock™ allows you to block the viewing of certain chan-
nels or programs with certain ratings if you do not want your
children to view inappropriate materials.
Approx. 4 hours
(single-sided)
Approx. 8 hours
(double-sided)
DVDs are
12 cm
divided into Titles,
which are divided
into Chapters.
Titles and Chapters
are numbered.
Sound
and
Pictures
Digital
Video
Disc
Auto Programming scans (when activated) for all available
channels from regular antenna or cable signals and stores only
active broadcast stations in the TV’s memory.
Approx. 80 minutes
(single-sided)
Approx. 160 minutes
(double-sided)
8 cm
AutoPicture™ allows you to change the picture settings (color,
tint, contrast, etc.) for various types of programming, such as
sports, movies, multimedia (games), or weak signals with the
push of one button.
Audio CDs are
divided into numbered
Tracks, i.e., a track
may be one song.
12 cm
74 minutes
20 minutes
Audio
CD
Sound
8 cm
(singles)
Video CDs are
divided into Tracks.
Sound
and
Video
CD
AutoSound™ allows you to select from three factory-set con-
trols and a personal control that you set according to your own
preferences through the on-screen Sound menu. The three fac-
tory-set controls (Voice, Music, and Theatre) enable you to tai-
lor the TV sound so as to enhance the particular programming
you are watching.
Pictures
Sound
and
Pictures
12 cm
74 minutes
20 minutes
Compact
Disc
Recordable
8 cm
(singles)
Recordable
Channel Edit allows you to add or delete channels from the
list stored in the TV’s memory. Channel Edit makes it easy to
limit or expand the number of channels that are available to you
when you press the Channel (+) or (–) buttons on your remote
control.
Sound
and
Pictures
Compact
Disc
Rewritable
12 cm
74 minutes
Closed Captioning allows the viewer to read TV program dia-
logue or voice conversations as on-screen text.
CLEANING DISCS
Some problems occur because the disc inside the player is dirty. To
avoid these problems clean your discs regularly, in the following
way:
Contrast + helps you sharpen the picture quality by making
dark portions of the picture darker and light portions brighter.
Infrared Remote Control controls your TV and the built in
DVD player.
• When a disc becomes dirty, clean it with a CD cleaning cloth.
Wipe the disc from the center out.
On-screen Menu shows helpful messages and instructions for
setting TV feature controls (can be viewed in English, French,
or Spanish).
Caution: Do not use solvents such as benzine, thinner, commer-
cially available cleaners, or anti-static spray intended for analog
discs.
Sleep Timer automatically turns the TV OFF after a set amount
of time that you choose.
Standard Broadcast (VHF/UHF) or Cable TV (CATV)
channel capability allows for viewing by antenna or cable.
END-OF-LIFE DISPOSAL
Your new television and its packing contain materials that can be
recycled and reused. Specialized companies can recycle your prod-
uct to increase the amount of reusable materials and minimize the
amounts that need to be properly disposed.
Stereo capability, including a built-in audio amplifier and twin-
speaker system, allows for the reception of TV programs broad-
cast in stereo sound.
Surf Button allows you to easily switch among only the chan-
nels that are of interest to you (the ones that you have pro-
grammed into the TV’s Surf control through the on-screen
menu).
Your product also uses batteries that should not be thrown away
when depleted, but should be handed in and disposed of as small
chemical waste.
When you replace your existing equipment, please find out about the
local regulations regarding disposal of your old television, batteries,
and packing materials.
Timer allows you to set your TV to turn itself ON and OFF
once or daily like an alarm clock.
DVD Player plays DVD discs, Video CDs, Audio CDs, etc.
Create Favorite Track Programs and store them in the TV/DVD
Players memory.
Auto Lock, Auto Picture, Auto Sound, Active Control, QuadraSurf
are all registered trademarks of Philips Consumer Electronics Company.
Copyright © 2002 All rights reserved.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE LANGUAGE CONTROL
or our Spanish speaking TV owners an on-
Fscreen LANGUAGE option is present. With
the LANGUAGE control you can set the TV’s
on-screen menu to be shown in either English
or Spanish.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Language
Press the MENU button on the
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
remote to show the on-screen menu.
More...
1
Press the CURSOR UP or DOWN
buttons to scroll through the on-screen
menu until the word INSTALL is
highlighted.
2
POWER
EJECT
SLEEP
Press the CURSOR RIGHT button
to display the INSTALL menu features.
LANGUAGE will be highlighted.
5
2
TV
Install
Language
Tuner Mode
Auto Program
Channel Edit
VCR
MODE
SYSTEM MENU
OSD
3
4
5
English
AUDIO
REPEAT REPEAT A-B SUBTITLE
Press the CURSOR RIGHT button
repeatedly to select ENGLISH or
ESPAÑOL (Spanish).
SMART SOUND
SMART PICTURE
TV/DVD
1
2
DVD
MENU
MENU
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the TV’s screen.
OR
VOL
OK
CH
Instalar
Idioma
Sintonia
Auto Programa
Editar Canal
3
4
MUTE
PAUSE
STOP
PLAY
Español
HELPFUL HINT
The Language control only makes the TV’s
on-screen MENU items appear in English
or Spanish text.
2
5
8
0
3
1
4
6
7
9
A/CH
It does not change the other on-screen text
features such as Closed Caption (CC) TV
shows.
CC
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE TUNER MODE CONTROL
he TUNER MODE control allows you to
Tchange the TV’s signal input to either
ANTENNA, CABLE or AUTO mode. It’s
important for the TV to know what type of
signal to look for. (From a Cable TV signal or
a normal Antenna signal.) In the AUTO
mode, when the AUTO PROGRAM feature is
activated, the TV will automatically choose
the correct mode.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
More...
Press the MENU button on the
remote to show the on-screen menu.
1
2
POWER
EJECT
Press the CURSOR UP or DOWN
buttons to scroll through the on-screen
menu until the word INSTALL is
highlighted.
SLEEP
TV
6
2
4
VCR
MODE
Install
Language
Tuner Mode
Auto Program
Channel Edit
SYSTEM MENU
OSD
English
Antenna
AUDIO
REPEAT REPEAT A-B SUBTITLE
SMART SOUND
SMART PICTURE
Press the CURSOR RIGHT button
TV/DVD
to display the INSTALL menu fea-
tures.
1
3
4
DVD
MENU
MENU
Press CURSOR UP or DOWN but-
tons to scroll the Install features until
the words TUNER MODE is high-
lighted.
OR
VOL
OK
CH
3
5
MUTE
PAUSE
Install
Language
Tuner Mode
Auto Program
Channel Edit
STOP
PLAY
English
Cable
2
4
Press the CURSOR RIGHT button
to select either ANTENNA, CABLE,
or AUTO mode.
2
5
8
0
3
1
4
5
6
6
When finished, press the SYSTEM
MENU (OSD) button to remove the
on-screen menu from the TV’s screen.
7
9
A/CH
CC
OR
Install
Language
HELPFUL HINT
English
Auto
Tuner Mode
Auto Program
Channel Edit
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto-
matically set itself to the correct mode
based on the type of signal it detects when
the AUTO PROGRAM feature is activated.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO AUTOMATICALLY PROGRAM CHANNELS
our TV can automatically set itself for
Ylocal area (or Cable TV) channels. This
makes it easy for you to select only the TV
stations in your area when the CHANNEL
(+), (–) buttons are pressed.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Note: Make sure the antenna or cable signal
connection has been completed before AUTO
PROGRAM is activated.
Language
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
More...
Press the MENU button on the
remote to show the on-screen menu.
1
2
POWER
EJECT
Press the CURSOR UP or DOWN
buttons to scroll through the on-screen
menu until the word INSTALL is
highlighted.
SLEEP
TV
6
VCR
MODE
Install
Language
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
Tuner Mode
Auto Program
Channel Edit
2
4
Press the CURSOR RIGHT button
SMART SOUND
SMART PICTURE
to display the INSTALL menu fea-
tures.
TV/DVD
3
4
1
DVD
MENU
MENU
Press CURSOR UP or DOWN but-
tons to scroll the Install features until
the words AUTO PROGRAM are
highlighted.
Auto Program
Channel
VOL
OK
CH
3
5
12
13
MUTE
PAUSE
STOP
PLAY
Press the CURSOR RIGHT button
2
4
to start the Auto Program scanning of
channels. Auto Programming will store
all available channels in the TV’s
memory then tune to the lowest avail-
able channel when done.
5
2
5
8
0
3
1
4
Auto Program
Channel
6
7
9
A/CH
CC
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the TV’s screen.
Auto Program
Channel
6
14
HELPFUL HINT
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto-
matically set itself to the correct mode
based on the type of signal it detects when
the AUTO PROGRAM feature is activated.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADD OR DELETE CHANNELS
hannel Edit makes it easy for you to ADD
Cor DELETE channels from the list of
channels stored in the TV’s memory.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Press the MENU button on the
Main
Picture
remote to show the on-screen menu.
1
2
Language
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
Press the CURSOR UP or DOWN
buttons to scroll through the on-screen
menu until the word INSTALL is
highlighted.
More...
Press the CURSOR RIGHT button
POWER
EJECT
to display the INSTALL menu fea-
tures.
3
4
SLEEP
TV
VCR
MODE
9
2
4
Install
Language
Tuner Mode
Auto Program
Channel Edit
SYSTEM MENU
OSD
Channel No.
Skipped
Press the CURSOR UP or DOWN
buttons to scroll the Install features
until the words CHANNEL EDIT are
highlighted.
AUDIO
REPEAT REPEAT A-B SUBTITLE
SMART SOUND
SMART PICTURE
TV/DVD
1
D
MENU
MENU
Press the CURSOR RIGHT button
to display the CHANNEL EDIT
options.
5
6
3
5
8
Channel Edit
Channel No.
Skipped
With the CHANNEL EDIT options
displayed, and CHANNEL NO. high-
lighted; enter the channel number (with
the NUMBERED or the CH + or –
buttons) you wish to add (Skipped
OFF), or delete (Skipped ON) from the
TV’s memory.
VOL
OK
CH
2
4
7
12
MUTE
PAUSE
STOP
PLAY
2
5
8
0
3
1
4
6
6
8
7
9
A/CH
6
Using the CURSOR DOWN button,
CC
scroll the menu to highlight the word
SKIPPED.
7
8
Channel Edit
Channel No.
Skipped
On
Off
Now use the CURSOR RIGHT but-
ton to toggle between ON or OFF.
If ON is selected the channel is
skipped when scrolling channels with
the CH + or – buttons. If OFF is
selected the channel is not skipped
when scrolling channels with the CH +
or – buttons.
Channel Edit
Channel No.
Skipped
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the TV’s screen.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
o adjust your TV picture controls, select a
Tchannel and follow the steps shown below:
Main
Picture
Sound
Features
Install
Press the MENU button on the remote
Brightness
Color
Picture
Sharpness
Tint
Picture
Brightness
Color
Picture
Sharpness
Tint
to display the on-screen menu.
1
50
Press the CURSOR UP or DOWN
buttons until the word PICTURE is
2
More...
highlighted.
Color Temp.
Press the CURSOR RIGHT button to
display the PICTURE menu features.
3
POWER
EJECT
Press CURSOR UP or DOWN but-
7
SLEEP
tons to scroll the Picture features and
TV
Picture
Brightness
Color
4
VCR
highlight the control you wish to adjust
MODE
SYSTEM MENU
OSD
65
50
(Brightness, Color, Picture, Sharpness,
Tint, Color Temp., DNR, or Contrast +).
2
4
6
AUDIO
REPEAT REPEAT A-B SUBTITLE
Picture
SMART SOUND
SMART PICTURE
Brightness
Press the CURSOR RIGHT or the
TV/DVD
Color
CURSOR LEFT buttons to adjust the
1
5
5
6
7
cure
Picture
DVD
MENU
selected control or to make selections
MENU
for the choosen control.
Brightness
Press the CURSOR UP or DOWN
Color
buttons to select and adjust other
Picture
Sharpness
50
50
Picture Menu controls.
VOL
OK
CH
3
5
MUTE
PAUSE
STOP
PLAY
Picture
Brightness
Color
When finished, press the SYSTEM
2
4
6
MENU (OSD) button to remove the
2
5
8
0
3
1
4
menu from the TV’s screen.
Picture
Sharpness
Tnt
6
HELPFUL HINT
7
9
A/CH
CC
BRIGHTNESS: Press the Cursor Right or
Left buttons until darkest parts of the picture
are as bright as you prefer.
Picture
Brightness
Color
COLOR: Press the Cursor Right or Left
Picture
Tint
Tt
Picture
Brightness
Color
Picture
Sharpness
Tint
Color Temp.
buttons to add or eliminate color.
50
Normal
On
PICTURE: Press the Cursor Right or Left
buttons until lightest parts of the picture
show good detail.
SHARPNESS: Press the Cursor Right or
Left buttons to improve detail in the picture.
TINT: Press the Cursor Right or Left but-
tons to obtain natural skin tones.
COLOR TEMP: Press the Cursor Right
or Left buttons to select NORMAL, COOL,
or WARM picture preferences. (NORMAL
will keep the whites, white; COOL will make
the whites, bluish; and WARM will make the
whites, reddish.)
Picture
Brightness
Color
Picture
Sharpness
Tint
DNR
DNR: Press the Cursor Right or Left but-
tons to turn DNR ON or OFF. Dynamic
Noise Reduction helps to eliminate “noise”
from the picture.
Picture
Brightness
Color
CONTRAST +: Press the Cursor Right or
Left buttons to turn Contrast + ON or OFF.
When ON, this control will optimize the pic-
ture contrast for improved picture clarity.
Picture
Sharpness
Tint
Contrast +
On
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE SOUND ADJUSTMENT CONTROLS
esides the normal volume level control,
Byour TV also has Treble, Bass, Balance,
AVL (automatic volume leveler), Incr.
Surround, Ultra Bass, and Sound
(Stereo/Mono) controls.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Treble
Bass
Balance
AVL
Incr. Surround
More . . .
Press the MENU button on the remote
to display the on-screen menu.
1
More...
Press the CURSOR UP or CURSOR
DOWN button until the word SOUND
2
is highlighted.
Press the CURSOR RIGHT button
to display the SOUND menu features.
POWER
EJECT
3
SLEEP
Sound
Treble
Bass
Balance
AVL
TV
6
65
55
R
Press the CURSOR UP or CURSOR
VCR
MODE
SYSTEM MENU
OSD
DOWN button to scroll the Sound
4
menu features until the control you wish
AUDIO
REPEAT REPEAT A-B SUBTITLE
to change is highlighted (Treble, Bass,
Balance, AVL, Incr. Surround, Ultra
Bass, or Sound ).
2
4
Incr. Surround
Ultra Bass
SMART SOUND
SMART PICTURE
TV/DVD
1
5
MENU
MENU
Press the CURSOR RIGHT or
LEFT button to turn the adjust or turn
5
6
the control On or Off.
Sound
Treble
Bass
Balance
AVL
When finished, press the SYSTEM
VOL
CH
3
5
MENU (OSD) button to remove the
MUTE
PAUSE
OK
STOP
PLAY
menu from the TV’s screen.
2
4
Incr. Surround
Ultra Bass
2
5
8
0
3
1
HELPFUL HINT
4
6
TREBLE: Press the Cursor Right or Left
buttons to adjust the control. The control
will enhance the high frequency sounds.
7
9
A/CH
CC
Sound
Treble
Bass
Balance
AVL
BASS: Press the Cursor Right or Left
buttons to adjust the control. The control
will enhance the low frequency sounds.
L
Incr. Surround
Ultra Bass
BALANCE: Press the Cursor Right or
Left buttons to adjust the level of sound
coming from the left and right speakers.
AVL: (Auto Volume Leveler) Press the
Cursor Right or Left buttons to turn the
control On or Off. When On, AVL will level
out the sound being heard when sudden
changes in volume occur during commercial
breaks or channel changes.
Sound
Treble
Bass
Balance
AVL
Sound
Treble
Bass
Balance
AVL
On
INCR. SURROUND: Press the Cursor
Right or Left buttons to select between
Incr. Surround or Stereo settings (If Stereo),
or select Spatial or Mono (If Mono).
Incr. Surround
Ultra Bass
Stereo
Incr. Surround
Ultra Bass
ULTRA BASS: Press the Cursor Right or
Left buttons to turn Ultra Bass On or Off.
Ultra Bass will enhance the low frequency
sound.
Sound
Treble
Sound
Bass
SOUND: Press the Cursor Right or Left
buttons to select between Stereo or Mono
settings. Note: If Stereo is not present on a
selected show and the TV is placed in the
Stereo mode, the sound coming from the TV
will remain in the Mono mode.
Bass
Balance
AVL
Incr. Surround
Ultra Bass
Balance
AVL
Incr. Surround
Ultra Bass
Sound
On
Stereo
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE TIMER CONTROLS
he Timer controls allow you to use your
TTV as an alarm clock if set to turn itself
on and off at a specific time. It also can be set
to tune to a specific channel at a specific
time.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Timer
AutoLock
Format
Press the MENU button on the
Active Control
More...
remote to display the on-screen menu.
1
Press the CURSOR DOWN button
until the word FEATURES is high-
lighted.
2
POWER
EJECT
Main
Timer
Time
Press the CURSOR RIGHT button to
display the FEATURES menu options.
TIMER will be highlighted.
SLEEP
TV
7
5
Autolock
Format
Active Control
Start Time
Stop Time
Channel No.
Activate
VCR
MODE
SYSTEM MENU
OSD
3
4
5
AUDIO
REPEAT REPEAT A-B SUBTITLE
Display
Press the CURSOR RIGHT button
to shift the menu to the left and enter
the TIMER control options.
1
6
SMART SOUND
SMART PICTURE
TV/DVD
DVD
MENU
MENU
Press the CURSOR UP or DOWN
button to select and highlight one of
the TIMER Controls. Choose from
TIME, START TIME, STOP TIME,
CHANNEL, ACTIVATE, or DISPLAY.
Timer
Time
Start Time
Stop Time
Channel No.
Activate
10 :30 AM
VOL
OK
CH
3
4
6
MUTE
PAUSE
STOP
PLAY
2
5
Display
2
5
8
0
3
1
4
Press the CURSOR LEFT or
RIGHT button to start the control
adjustments. Use the buttons described
in the definitions below to finish the
adjustment.
6
6
7
9
A/CH
Timer
Time
CC
Start Time
Stop Time
Channel No.
Activate
12 :30 PM
TIME: Enter the current time with the
numbered buttons. Use the Cursor Right
button to move to the AM/PM area and use
the Cursor Left or Right buttons to toggle
AM or PM.
Display
START TIME: Use the numbered buttons
to enter a start-up time for the TV to turn
on or to tune a specific channel.
Timer
Time
Timer
Time
STOP TIME: Use the numbered buttons to
Start Time
Stop Time
Channel No.
Activate
enter a time for the TV to shut itself off.
Start Time
Stop Time
Channel No.
Activate
01 :30 PM
CHANNEL: Use the Numbered buttons or
the CH + or – buttons to select a specific
channel for the TV to tune to at the specific
Start Time.
0
10
Display
Display
ACTIVATE: Set the Timer to preform it’s
function ONCE or DAILY.
DISPLAY: Set to ON or OFF. When ON,
the time will be displayed ALL the time the
TV in ON. When OFF, the time will only
appear when the SYSTEM MENU (OSD)
button is pressed.
Timer
Time
Start Time
Stop Time
Channel No.
Activate
Timer
Time
Start Time
Stop Time
Channel No.
Activate
Once
Display
Display
When finished, press the SYSTEM
On
MENU (OSD) button to remove the
menu from the TV’s screen
7
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE FORMAT CONTROL
any times while watching movies from a
MDVD player the image is shown in
“letter box” format. This is the format that is
shown in movie theaters. When shown on a TV
screen, the image will have areas of black on
top and bottom of the screen. The FORMAT
Control can help to display the image as close
as possible to its original aspect ratio.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Timer
AutoLock
Format
More...
Active Control
Press the MENU button on the
remote to display the on-screen menu.
1
POWER
EJECT
Press the CURSOR DOWN button
until the word FEATURES is high-
lighted.
7
SLEEP
2
TV
VCR
MODE
6
2
Features
Timer
AutoLock
Format
Active Control
SYSTEM MENU
OSD
Press the CURSOR RIGHT button to
display the FEATURES menu options
(Timer, AutoLock, Format, or Active
Control).
AUDIO
REPEAT REPEAT A-B SUBTITLE
4:3
3
SMART SOUND
SMART PICTURE
1
5
TV/DVD
DVD
MENU
MENU
Press the CURSOR DOWN button
until the word FORMAT is highlighted.
4
5
OR
Press the CURSOR RIGHT or CUR-
SOR LEFT buttons to select one of
the three options 4:3, Expand 4:3, or
Compress 16:9.
4:3 - Standard format for the TV.
Expand 4:3 - Enlarges the picture to
fill out the entire screen area, eliminat-
ing the “letter box” effect.
VOL
CH
3
5
MUTE
PAUSE
Features
Timer
AutoLock
Format
OK
STOP
PLAY
2
4
Expand 4:3
2
5
8
0
3
1
Active Control
4
6
7
9
Compress 16:9 - Allows for viewing
of movies in their full width (also
know as letter-box style).
A/CH
CC
OR
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the TV’s screen.
Features
Timer
AutoLock
Format
6
7
Compress 16:9
The Expand 4:3 format can also be acti-
Active Control
v
vated using the FORMAT
button
when the onscreen menu is not being
displayed. Pressing this button will tog-
gle the standard 4:3 format, the Expand
4:3 format, or Compress 16:9 format.
4:3
Expand 4:3
14
Compress 16:9
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE AUTOLOCK™ CONTROLS
he AutoLock™ feature is an integrat-
Ted circuit that receives and processes
data sent by broadcasters, or other pro-
gram providers, that contain program con-
tent advisories. When programmed by the
viewer, a TV with AutoLock™ can respond
to the content advisories and block pro-
gram content that may be found objection-
able (such as offensive language, violence,
sexual situations, etc.). This is a great fea-
ture to censor the type of viewing children
may watch.
Movie Rating
G
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
On
On
PG
PG-13
R
NC-17
X
MOVIE RATINGS
TV PARENTAL GUIDELINES
(MOTION PICTURE ASSOCIATION OF AMERICA)
(TV BROADCASTERS)
Over the next few pages you’ll learn how
to block channels and certain rated pro-
gramming. Below is a brief explanation of
some terms and ratings you will find in the
AutoLock feature.
G: General Audience - All ages admit-
ted. Most parents would find this pro-
gram suitable for all ages. This type of
programming contains little or no vio-
lence, no strong language, and little or
no sexual dialogue or situations.
TV-Y - (All children -- This pro-
TV
gram is designed to be appropriate
Y for all children.) Designed for a
very young audience, including children
ages 2-6. This type of programming is not
expected to frighten younger children.
AutoLock™ offers various BLOCKING
controls from which to choose:
TV-Y7 - (Directed to Older
TV
Y7
PG: Parental Guidance Suggested -
This programming contains material that
parents may find unsuitable for younger
children.) It may contain one or more of
the following: Moderate violence, some
sexual situations, infrequent coarse lan-
guage, or some suggestive dialogue.
Children -- This program is
Access Code: An Access Code must be set
to prevent children from unblocking ques-
tionable programming.
designed for children age 7 and
above.) It may be more appropriate for
children who have acquired the develop-
ment skills needed to distinguish between
make-believe and reality. This program-
ming may include mild fantasy and comic
violence (FV).
Channel Block: Individual channels
including the A/V inputs can be blocked.
Clear All: Allows you clear all channels
being blocked from your viewing set with
the Channel Block Control.
TV-G - (General Audience -- Most
PG-13: Parents Strongly Cautioned -
This programming contains material that
parents may find unsuitable for children
under the age of 13. It contains one or
more of the following: violence, sexual sit-
uations, coarse language, or suggestive
dialogue.
TV
G
parents would find this program
suitable for all ages.) This type of
Block All: Allows you to block ALL chan-
nels and A/V inputs at one time.
programming contains little or no vio-
lence, no strong language, and little or no
sexual dialogue or situations.
Movie Ratings: Block programming
based on ratings patterned by the Motion
Pictures Association of America.
TV-PG - (Parental Guidance
TV
PG
Suggested -- This program con-
tains material that parents may
TV Ratings: Block programming based
on standard TV ratings set by TV broad-
casters.
R: Restricted -This is programming is
specifically designed for adults. Anyone
under the age of 17 should only view this
programming with an accompanying par-
ent or adult guardian. It contains one or
more of the following: intense violence,
intense sexual situations, strong coarse
language, or intensely suggestive dialogue.
find unsuitable for younger children.) This
type of programming contains one or more
of the following: Moderate violence (V),
some sexual situations (S), infrequent
coarse language (L), or some suggestive
dialogue (D).
To learn more about the Motion Picture
Ratings and the TV Ratings, refer to the
definitions listed on the columns to the
right.
TV-14 - (Parents Strongly
TV
Cautioned -- This program con-
Press the SYSTEM MENU (OSD) but-
ton twice to display the AutoLock
review screen. This screen shows what is
activated within the AutoLock settings.
14 tains some material that many par-
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only. It con-
tains graphic violence, explicit sex, or
crude indecent language.
ents would find unsuitable for children
under 14 years of age.) This type of pro-
gramming contains one or more of the fol-
lowing: intense violence (V), intense sexu-
al situations (S), strong coarse language
(L), or intensely suggestive dialogue (D).
Movie Rating
TV Rating
TV-Y
TV-Y7
TV-G
- -
G
PG
PG-13
- -
X: Adults Only - This type of program-
ming contains one or more of the follow-
ing: very graphic violence, very graphic
and explicit or indecent sexual acts, very
coarse and intensely suggestive language.
TV-MA - (Mature Audience Only
TV
MA
-- This program is specifically
designed to be viewed by adults
and therefore may be unsuitable for chil-
dren under 17.) This type of programming
contains one or more of the following:
graphic violence (V), explicit sexual situa-
tions (S), or crude indecent language (L).
- -
- -
- -
- -
Unrated On
No Rating Off
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP AN AUTOLOCK™ ACCESS CODE
ver the next few pages you’ll learn how
Oto block channels and get a better under-
standing of the rating terms for certain pro-
gramming.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
First, let’s start by learning how to set a per-
sonal access code:
More...
Press the MENU button on the remote
to display the on-screen menu.
Main
Picture
Sound
Features
Install
Timer
AutoLock
Format
1
2
POWER
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
SLEEP
EJECT
Active Control
TV
VCR
MODE
SY
2
AUDIO
REPEAT REPEAT A-B
4
SMART SOUND
SM
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
TV/DVD
1
DVD
MENU
Features
Timer
AutoLock
Format
3
4
5
6
MENU
Active Control
Press the CURSOR UP or DOWN
button until the words AUTOLOCK
are highlighted.
VOL
CH
3
5
6
7
MUTE
PAUSE
OK
STOP
PLAY
2
4
2
5
3
1
Press the CURSOR RIGHT button.
The screen will read, “ACCESS
CODE - - - - .”
4
6
Features
Timer
AutoLock
Format
Access Code
- - - -
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
Active Control
way to reset the code when the current
access code is not known.
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX” appears on
the Access Code screen as you press
the numbered buttons.
“INCORRECT CODE” will appear
on the screen, and you will need to
enter 0, 7, 1, 1 again.
Features
Timer
AutoLock
Format
Features
Timer
Features
Timer
AutoLock
Format
Access Code
XXXX
Access Code
XXXX
Incorrect
Access Code
XX
AutoLock
Format
Active Control
Active Control
Active Control
The screen will ask you to enter a
“New Code.” Enter a “new” 4 digit
code using the NUMBERED buttons.
7
The screen will then ask you to CON-
FIRM the code you just entered.
Enter your new code again. “XXXX”
will appear when you enter your new
code and then display the AutoLock
menu options.
Features
Timer
AutoLock
Format
Features
Timer
AutoLock
Format
Features
Timer
AutoLock
Format
New Code
- - - -
New Code
XX - -
Confirm Code
XXXX
Active Control
Active Control
Active Control
Proceed to the next page to learn more...
After the initial Access
Code has been set, the code
can be changed by using
the Setup Code Control
within AutoLock.
The process will follow the
same steps as described on
this page.
HELPFUL HINT
AutoLock
Block Channel OffStop Time
Setup Code
Clear All
Block All
AutoLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Channel
Activate
Display
OffStop Time
Channel
Activate
Parents - it isn’t possible for your child to
unblock a channel without knowing your
access code or changing it to a new one. If
your code changes, and you didn’t change
it, then you know it’s been altered by some-
one else and blocked channels have been
viewed.
Movie Rating
TV Rating
Display
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO BLOCK CHANNELS
fter your personal access code has been
Aset (see previous page), you are now
ready to select the channels you want to
block out or censor.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Press the NUMBERED (or CH +, –)
More...
buttons to tune the channel you wish
to block or censor.
1
2
3
4
5
6
7
Main
Picture
Timer
Sound
Features
Install
AutoLock
Format
Active Control
Press the MENU button on the
remote to show the on-screen menu.
POWER
SLEEP
3
TV
VCR
MODE
SY
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
5
AUDIO
REPEAT REPEAT A-B
4
6
9
8
SMART SOUND
SM
TV/DVD
2
DVD
MENU
Features
Timer
AutoLock
Format
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
MENU
Active Control
VOL
CH
MUTE
PAUSE
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
OK
STOP
PLAY
10
3
5
8
2
5
8
0
3
1
4
6
Press the CURSOR RIGHT button.
“ACCESS CODE” will appear on
the screen.
7
9
1
7
Features
Timer
AutoLock
Format
A/CH
Access Code
- - - -
CC
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
Active Control
Enter the correct access code num-
ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
options will be displayed.
Features
Timer
AutoLock
Format
AutoLock
Block Channel OffStop Time
AutoLock
Block Channel OnStop Time
Setup Code
Clear All
Block All
Press the CURSOR UP or DOWN
buttons until the words BLOCK
CHANNELS are highlighted.
Access Code
XXXX
Setup Code
Clear All
Block All
Channel
Activate
Display
Channel
Activate
Display
8
9
Active Control
Movie Rating
TV Rating
Movie Rating
TV Rating
Press the CURSOR RIGHT button
to turn blocking ON or OFF for that
channel. When ON is selected the
channel will be blocked.
Channel 12
Blocked By AutoLock
Press the CH + or – button to select
Channel Blocking
other channels you wish to block.
Repeat step 9 to block the new channel.
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
10
Access Code
- - - -
HELPFUL HINT
If you tune to a blocked channel and enter
your Access Code to view the channel, ALL
blocked channels will be viewable until the
TV has been turned off. When the TV is
powered back ON, the previously blocked
channels will be blocked again.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CLEAR ALL BLOCKED CHANNELS AT THE SAME TIME
fter blocking specific channels there may
Acome a time when you want to clear all
the channels so they can be viewed. The fol-
lowing steps explain how to CLEAR ALL
blocked channels.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Main
Picture
Press the MENU button on the
Timer
remote to show the on-screen menu.
Sound
Features
Install
AutoLock
Format
Active Control
1
POWER
EJECT
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
9
SLEEP
TV
2
VCR
MODE
SYSTEM MENU
OSD
2
4
7
AUDIO
REPEAT REPEAT A-B SUBTITLE
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
SMART SOUND
SMART PICTURE
TV/DVD
3
4
1
DVD
ME
Features
Timer
AutoLock
Format
MENU
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
Active Control
3
5
8
VOL
OK
CH
MUTE
PAUSE
STOP
PLAY
2
4
7
Press the CURSOR RIGHT button.
5
2
5
8
0
3
1
4
6
7
9
Features
Timer
AutoLock
Format
Enter the correct access code num-
6
A/CH
Access Code
- - - -
CC
ber. “XXXX” shows on the Access
6
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
Code display as you press the NUM-
BERED buttons. AutoLock menu
options will be displayed.
Active Control
Press the CURSOR UP or DOWN
button until the words CLEAR ALL
are highlighted.
7
8
9
Features
Timer
AutoLock
Format
AutoLock
Block Channel OffStop Time
AutoLock
Access Code
XXXX
Block Channel
Setup Code
Clear All
Press the CURSOR RIGHT button
to clear all blocked channels. The
Clear All option will read, “Cleared.”
Setup Code
Clear All
Block All
Channel
Activate
Display
Clear ?
Active Control
Block All
Movie Rating
TV Rating
Movie Rating
TV Rating
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the TV’s screen.
AutoLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Channel 12
Blocked By AutoLock
Channel Blocking
ClearedStop Time
Channel
Activate
HELPFUL HINT
If you tune to a blocked channel and enter
your Access Code to view the channel, ALL
blocked channels will be viewable until the
TV is powered OFF and then turned back
ON. When the TV is powered back ON, the
previously blocked channels will be blocked
again.
Access Code
- - - -
Display
The Clear All option when activated
Or, enter your Access
Code to view a tuned
channel that is blocked
with Block Channel.
will unblock ALL blocked channels. It
will not affect programming blocked
by the Movie or TV Rating options.
CLEAR ALL will not work with the Movie
and TV Ratings. These options must be
reset individually.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO BLOCK ALL CHANNELS AT THE SAME TIME
here may come a time when you want to
TBlock All the television’s channels. Maybe
you don’t want your children to watch TV for
a given time. With the Block All control, ALL
available channels (including the A/V Inputs)
can be set to block at the same time.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Press the MENU button on the
remote to show the on-screen menu.
Main
Picture
1
Timer
AutoLock
Format
Sound
Features
Install
POWER
EJECT
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
Active Control
9
SLEEP
2
TV
VCR
MODE
SYSTEM MENU
OSD
2
4
7
AUDIO
REPEAT REPEAT A-B SUBTITLE
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
SMART SOUND
SMART PICTURE
TV/DVD
3
4
1
Features
Timer
AutoLock
Format
Active Control
MENU
MENU
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
3
5
8
VOL
OK
CH
MUTE
PAUSE
STOP
PLAY
2
4
7
Press the CURSOR RIGHT button.
5
2
5
8
0
3
1
4
6
Features
Timer
AutoLock
Format
7
9
Enter the correct access code num-
ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
6
Access Code
- - - -
A/CH
C
6
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
Active Control
options will be displayed.
Press the CURSOR UP or DOWN
button until the words BLOCK ALL
are highlighted.
7
8
AutoLock
AutoLock
Features
Timer
AutoLock
Format
Block Channel
Setup Code
Clear All
Block Channel
Setup Code
Clear All
Access Code
XXXX
Press the CURSOR RIGHT button
to turn Block All ON or OFF. When
ON is selected, ALL available channels
will be blocked.
Block All
Off
Block All
On
Active Control
Movie Rating
TV Rating
Movie Rating
TV Rating
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the screen.
9
Channel 12
Blocked By AutoLock
Channel Blocking
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
Access Code
- - - -
HELPFUL HINT
If you tune to a blocked channel and enter
your Access Code to view the channel, ALL
blocked channels will be viewable until the
TV has been turned off. When the TV is
powered back ON, the previously blocked
channels will be blocked again.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
here are two types of program ratings
Twithin the AutoLock™ feature. One is
based on the Movie Industry ratings while the
other is based on the TV Industry ratings. Both
can be used to block or censor programming
that has been rated in either manner.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Let’s first look at the Movie Rating options of
AutoLock™:
Main
Picture
Sound
Features
Install
Timer
AutoLock
Format
2
POW
Active Control
Press the MENU button on the remote
to display the on-screen menu.
SLEEP
4
TV
1
VCR
MODE
SY
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
7
AUDIO
REPEAT REPEAT A-B S
2
9
SMART SOUND
SM
TV/DVD
1
DVD
MENU
Press the CURSOR RIGHT button to
display the FEATURES menu options.
MENU
Features
Timer
AutoLock
Format
3
5
3
Press the CURSOR UP or DOWN
button until AutoLock is highlighted.
Active Control
VOL
CH
8
MUTE
PAUSE
4
OK
STOP
PLAY
2
4
7
9
Press the CURSOR RIGHT button.
The screen will prompt you for your
Access Code.
10
2
5
8
0
3
1
5
4
6
7
9
6
A/CH
Using the NUMBERED buttons on
the remote, enter your 4 digit Access
Code. The AutoLock menu options will
be displayed.
Features
Timer
AutoLock
Format
CC
Access Code
- - - -
6
Active Control
Press the CURSOR UP or DOWN
button to highlight the words MOVIE
RATING.
7
8
9
Press the CURSOR RIGHT button to
display the MOVIE RATING options
(G, PG, PG-13, R, NC17, or X).
AutoLock
Movie Rating
G
PG
PG-13
R
Features
Timer
AutoLock
Format
Block Channel
Setup Code
Clear All
G
Off
Access Code
XXXX
PG
PG-13
R
Block All
Active Control
Press the CURSOR UP or DOWN
button to highlight any of the Movie
Rating options. When highlighted, all
these options can be turned ON (which
will allow blocking) or OFF (which will
allow viewing).
Movie Rating
TV Rating
NC-17
X
NC-17
X
Movie Rating
G
On
Channel 12
Blocked By AutoLock
Movie Rating
PG
PG-13
R
NC-17
X
OffStop Time
Use the CURSOR RIGHT button on
Channel
Activate
Display
the remote to turn the rating option ON
or OFF.
10
Access Code
- - - -
To view a program blocked by
the Movie Rating options, enter
your 4 digit access code. This
will disable all blocked Movie
Ratings until the TV is powered
off and on again. Then the block-
ing options will be restored.
HELPFUL HINT
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
When a rating is set to block, all higher rat-
ings will be automatically blocked as well.
(Example: If the the PG-13 rating is set to
block, the R, NC-17, and X ratings will also
be blocked.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON TV RATINGS
his portion of the AutoLock™ features
To view a program
blocked by the TV
Rating options, enter
your 4 digit access
code. This will dis-
able all blocked TV
Ratings until the TV
is powered off and
on again. Then the
blocking options will
be restored.
Tcover program ratings based on the TV
Industry rating system. This is known as TV
Rating within AutoLock™.
After selecting the Autolock™ feature and
entering your personal access code, the
AutoLock™ options screen appears;
AutoLock
Block Channel TV-Y
Setup Code
Clear All
Block All
Movie Rating
TV Rating
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV Rating
TV-Y
TV-Y7
TV-G
Off
Scroll the menu using the CURSOR
TV-PG
TV-14
TV-MA
UP or DOWN buttons until the words
TV RATING are highlighted.
1
2
POWER
Press the CURSOR RIGHT button to
display the TV Ratings (TV-Y, TV-Y7,
TV-G, TV-PG, TV-14, or TV-MA).
When highlighted, the TV-Y and TV-G
can be turned ON (which will allow
blocking) or OFF (which will allow
viewing), of these rated programs.
SLEEP
TV
1
TV Rating
TV-Y
VCR
MODE
On
SY
TV-Y7
TV-G
TV-PG
TV-14
3
AUDIO
REPEAT REPEAT A-B S
OffStop Time
Channel
Blocked By AutoLock
Activate
Channel 12
SMART SOUND
SMA
5
TV/DVD
TV Rating
TV-MA
Display
DVD
MENU
MENU
Access Code
- - - -
The ratings of TV-Y7, TV-PG, TV-14,
TV-MA can be customized to block V
(violence), FV (fantasy violence), S
(sexual situations), L (coarse lan-
guage), or D (suggestive dialogue).
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Block All
FV
2
4
6
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
1
3
5
2
5
8
3
1
Press the CURSOR UP or DOWN
button to highlight the desired rating.
4
6
3
4
7
9
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
A/CH
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
Press the CURSOR RIGHT button
on the remote to turn the TV-Y or TV-
G rating ON or OFF. Or, press the
CURSOR RIGHT button to enter the
sub-menus for the TV-Y7, TV-PG, TV-
14 or TV-MA ratings.
Off
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
If the TV-Y7, TV-PG, TV-14 or TV-
MA sub-menu is accessed, press the
CURSOR UP or CURSOR DOWN
button to select one of the options
Block All
Block All
Block All
V
S
L
V
S
L
V
S
L
5
D
D
(Block All, V, S, L, D, or FV).
Press the CURSOR RIGHT button
on the remote to turn the option ON or
OFF.
TV Ratings and
Rating Sub-Menus
When a TV Rating is selected to block,
ALL higher ratings will be blocked also.
6
TV-Y - (All children -- This program is designed to be appropriate for all children.) Designed for a very young audience, including children ages 2-6. This type
of programming is not expected to frighten younger children.
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7 and above.) It may be more appropriate for children who have acquired the
development skills needed to distinguish between make-believe and reality. This programming may include mild fantasy and comic violence (FV).
TV-G - (General Audience -- Most parents would find this program suitable for all ages.) This type of programming contains little or no violence, no strong
language and little or no sexual dialogue or situations.
TV-PG - (Parental Guidance Suggested -- This program contains material that parents may find unsuitable for younger children.)This type of programming
contains one or more of the following: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).
TV-14 - (Parents Strongly Cautioned -- This program contains some material that many parents would find unsuitable for children under 14 years of age.) This
type of programming contains one or more of the following: intensely suggestive dialogue (D), strong coarse language (L), intense sexual situations (S), or
intense violence (V).
TV-MA - (Mature Audience Only -- This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) This
type of programming contains one or more of the following: crude indecent language (L), explicit sexual situations (S), or graphic violence (V).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER AUTOLOCK™ BLOCKING OPTIONS
utoLock™ offers the viewer other block-
Aing features as well. With these Blocking
Options, the censoring can be turned ON or
OFF.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Press the MENU button on the
More...
remote to show the on-screen menu.
Main
Picture
1
Timer
Sound
Features
Install
AutoLock
Format
Active Control
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
2
POW
2
SLEEP
TV
VCR
MODE
4
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
SY
AUDIO
REPEAT REPEAT A-B
3
4
7
SMART SOUND
SMA
1
TV/DVD
9
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
Features
Timer
AutoLock
Format
DVD
MENU
MENU
10
3
5
Active Control
Press the CURSOR RIGHT button.
5
VOL
OK
CH
2
4
7
9
MUTE
PAUSE
STOP
PLAY
8
Enter the correct access code num-
10
2
5
8
3
1
4
ber. “XXXX” shows on the Access
6
6
Code display as you press the NUM-
7
9
Features
Timer
AutoLock
Format
BERED buttons. AutoLock menu
options will be displayed.
A/CH
6
Access Code
- - - -
CC
NOTE: Remember, if you ever fo0rget
your Access Code, the 0,7,1,1 access
code is the default code or a way to
reset the code when the current access
code is not known.
Active Control
Press the CURSOR UP or DOWN
buttons until the words BLOCKING
OPTIONS are highlighted.
7
8
Press the CURSOR RIGHT button
to display the Blocking Options
(BLOCKING, UNRATED, or NO
RATING) menu.
AutoLock
Features
Timer
AutoLock
Format
AutoLock
Block Channel OffStop Time
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Setup Code
Clear All
Block All
Unrated
No Rating
Blocking
Access Code
XXXX
Channel
Activate
Display
Press the CURSOR UP or DOWN
Movie Rating
TV Rating
Blocking Options
Active Control
buttons to highlight the desired fea-
ture.
9
10
When highlighted, each feature can be
turned ON or OFF using the CUR-
SOR RIGHT or LEFT buttons on the
remote.
Blocking Options
Unrated
No Rating
Blocking
Blocking Options
Unrated
No Rating
Blocking
Blocking Options
Unrated
On
On
No Rating
Blocking
On
BLOCKING OPTIONS:
BLOCKING: This is what might be called the “master switch” for AutoLock™. When in the ON position, ALL blocking/censoring
will take place. When in the OFF position, ALL blocking is disabled.
UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this feature is set to
ON and the BLOCKING feature is set to OFF.
NO RATING: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCKING fea-
ture is set to OFF.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE ACITVE CONTROL
he Active Control monitors and adjusts
Tincoming video signals to help provide the
best picture quality.
Main
Picture
Sound
Features
Install
When you choose to turn the Active Control
ON, the Brightness, Picture, Sharpness,
Contrast + and DNR (dynamic noise reduc-
tion) features are controlled automatically.
Active Control adjusts these picture settings
continuously and automatically.
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Timer
AutoLock
Format
More...
Active Control
Press the MENU button on the
remote to show the on-screen menu.
1
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
POWER
EJECT
2
SLEEP
Features
Timer
AutoLock
Format
TV
6
VCR
MODE
SYSTEM MENU
OSD
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
AUDIO
REPEAT REPEAT A-B SUBTITLE
3
4
5
2
4
Active Control
1
SMART SOUND
SMART PICTURE
TV/DVD
Press the CURSOR UP or DOWN
button until the words Active Control
are highlighted.
DVD
MENU
MENU
Press the CURSOR RIGHT button
to set the Active Control to Off, On, or
Display ON.
Features
Timer
AutoLock
Format
VOL
OK
CH
3
5
MUTE
PAUSE
STOP
PLAY
Display On - When selected, an Active
Control monitoring screen will be
shown for a few seconds whenever a
channel change is made. Within this
menu, you can actually see the controls
changing to give the best possible pic-
ture quality.
2
4
Active Control
Off
2
5
8
0
3
1
4
6
7
9
OR
A/CH
CC
On - When selected, the Active
Control will work to give the viewer
the best possible picture, but will not
display the monitoring screen when
channels are changed.
Features
Timer
AutoLock
Format
Active Control
On
Off - the Active control will not be
activated.
Active Control Monitoring Screen
Will appear when the Active Control
is set to “Display On.”.
When finished, press the SYSTEM
MENU (OSD) button to remove the
OR
6
menu from the TV’s screen.
10
Active Control
STEREO
Features
Timer
AutoLock
Format
Brightness
Picture
Sharpness
Contrast +
DNR
43
73
50
Active Control
Display On
On
On
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE SLEEPTIMER CONTROL
ave you ever fallen asleep in front of the
HTV only to have it wake you up at two in
the morning with a test pattern screeching in
your ears? Well, your TV can save you all
that trouble by automatically turning itself off.
Press the SLEEP button on the
Sleep 15
remote control and the SLEEP timer
display will appear on the screen.
1
2
Sleep 30
Press the SLEEP button repeatedly to
pick the amount of time (15, 30, 45,
60, 90, 120, 180 or 240 minutes)
before the TV will turn itself off.
POWER
SLEEP
EJECT
TV
VCR
MO
SYSTEM MENU
OSD
An on-screen count down will appear
during the last minute before the TV
shuts itself off.
Sleep 45
AUDIO
REPEAT REPEAT A-B SUBTITLE
1
2
SMART SOUND
SMART PICTURE
TV/DVD
DVD
MENU
MENU
HELPFUL HINT
The on-screen menu will time out and dis-
appear from the screen when you finish, or
you can press the SYSTEM MENU (OSD)
button to clear the menu from the screen.
Sleep 60
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
2
5
8
0
3
1
4
6
Sleep 90
7
9
A/CH
CC
During the last minute of a
Sleeptimer setting, an on-
screen count down will be dis-
played. Pressing any button
during the last minute will
cancel the Sleeptimer.
Sleep 120
Sleep 180
Good Bye
Sleep 9
Sleep 59
During the last 10 seconds of
a Sleeptimer setting, an on-
screen display will read
GOOD BYE.
Sleep 240
24
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE CLOSED CAPTIONING CONTROL
losed Captioning (CC) allows you to
Cread the voice content of television pro-
grams on the TV screen. Designed to help the
hearing impaired, this feature uses on-screen
“text boxes” to show dialogue and conversa-
tions while the TV program is in progress.
CC Off
Press the CC button on the remote to
display the current Closed Caption
setting.
1
2
CC 1
Press the CC button repeatedly to
choose from the four Closed Caption
options (CC Off, CC 1, CC 2, CC
Mute). Dialogue (and descriptions) for
the action on the captioned TV program
will appear on-screen if the tuned pro-
gram is broadcasting CC information.
POWER
SLEEP
EJECT
TV
3
VCR
MODE
SYSTEM MEN
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
SMART SOUND
SMART PICTURE
CC 2
TV/DVD
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the TV’s screen or let the
option time out and disappear from the
TV screen.
DVD
MENU
MENU
3
VOL
CH
HELPFUL HINT
MUTE
PAUSE
OK
STOP
PLAY
Not all TV programs and product com-
mercials are made with Closed Caption
(CC) information included. Neither are all
Closed Caption modes (CC1, or CC2) nec-
essarily being used during the transmission
of a closed caption program. Refer to your
area's TV program listings for the stations
and times of Closed Caption shows.
2
5
8
0
3
1
1
2
CC Mute
4
6
7
9
A/CH
CC
NOTE: The CC MUTE option
can be used to set the TV to
turn the Closed Caption mode
“ON” whenever the MUTE but-
ton on the remote is pressed.
This activates the CC1 option.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE SMARTPICTURE™ CONTROL
hether you’re watching a movie or a
Wsporting event, your TV has automatic
video control settings matched for your cur-
rent program source or content. The
SmartPicture™ feature quickly resets your
TV’s video controls for a number of different
types of programs and viewing conditions you
may have in your home. Each SmartPicture™
setting is preset at the factory to automatical-
ly adjust the TV’s Brightness, Color, Picture,
Sharpness, Tint, Color Temperature, DNR and
Contrast+ levels.
Personal
Movies
POWER
SLEEP
Press the SMART PICTURE button
EJECT
TV
on the remote control. The current Auto
Picture setting will appear in the middle
of the screen.
VCR
MODE
1
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
SMART SOUND
SMART PICTURE
Press the SMART PICTURE button
TV/DVD
repeatedly to select either PERSONAL,
MOVIES, SPORTS, WEAK SIGNAL,
or MULTIMEDIA picture settings.
Sports
2
DVD
MENU
MENU
1
2
Note: The PERSONAL setting is the setting
that you setup using the PICTURE options
within the on-screen menu. This is the only
Smart Picture setting that can be changed. All
other settings are setup at the factory during
the time of production.
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
2
5
8
0
3
1
MOVIES - Preset picture options for watch-
ing Video Tapes, or DVDs.
4
6
Weak Signal
7
9
SPORTS - Preset picture options for watch-
ing sporting events.
A/CH
CC
WEAK SIGNAL - Preset picture options for
watching programs where the reception is not
at its best.
MULTIMEDIA - Preset picture options for
use with video gaming.
Multimedia
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE SMARTSOUND™ CONTROL
he SmartSound™ feature allows the lis-
Ttener to select between four different fac-
tory set sound options. Personal (which can
be set by the user), Theatre (for movie view-
ing), Music (for musical type programming)
and Voice (when the program is mainly dia-
logue). These setting affect the Sound menu’s
Bass, Treble, AVL, and Incredible Surround
controls
Personal
Voice
To select any of the options follow the direc-
tions below.
POWER
Press the SMART SOUND button on
the remote control. The current Smart
SLEEP
EJECT
1
TV
Sound setting will appear in the middle
of the screen.
VCR
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
Press the SMART SOUND button
SMART SOUND
SMART PICTURE
repeatedly to toggle between the four
settings.
TV/DVD
2
Music
DVD
MENU
MENU
1
2
Note: Only the PERSONAL control can be
changed by the viewer. This changes the settings
in the main on-screen menu's sound controls.
VOL
CH
THEATRE - Preset sound options for watching
movies.
MUTE
PAUSE
OK
STOP
PLAY
MUSIC - Preset sound options for musical
programming where there is little dialogue.
2
5
8
0
3
1
VOICE - Preset sound options for program-
ming where heavy dialogue is present.
4
6
Theatre
7
9
A/CH
CC
27
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE QUADRASURF™ BUTTONS
“list” or series of previously viewed
Achannels can be selected with the
QuadraSurf™ (colored) buttons on your
12
remote control. With this feature you can easi-
ly switch between different TV programs that
currently interest you. The QuadraSurf™ con-
trol allows you set up four different personal
Surf lists using the colored buttons (on the
remote control), each holding up to ten chan-
nels in its quick viewing“list.”
12
Select List!
Press the CHANNEL (+) or (–) but-
tons (or the NUMBER buttons) to
1
POWER
select a channel to add to one of the
3
4
SURF lists.
SLEEP
EJECT
TV
Press the SMILEY
button on the
VCR
MODE
12 Added!
SYSTEM MENU
OSD
remote control to ADD the channel to
one of the SURF lists.
2
3
AUDIO
REPEAT REPEAT A-B SUBTITL
Press the corresponding COLORED
(Red, Green, Yellow or Blue) button
to add the channel to that button’s Surf
list. (Up to ten channels per button can
be stored.)
SMART SOUND
SMART PICTURE
5
6
TV/DVD
2
DVD
MENU
MENU
Repeat steps 1 through 3 to add additional
channels (up to 10) to each of the the SURF
lists.
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
To remove a channel from one of the SURF
lists;
12
1
Remove Item? - Press
2
5
8
0
3
1
Press the COLORED QuadraSurf™
4
6
button until the desired channel
4
appears. The screen will display the
7
9
A/CH
channel number with a colored
“Smiley” face to indicate the Colored
button it relates to.
CC
While the “Smiley” face channel
indicator is displayed, press the
5
12
FROWNIE
face button. The
screen will read, “Remove item? -
Press .”
Press the FROWNIE
face button
again to confirm your decision to
6
remove the channel from the Surf list.
Repeat steps 4-6 to remove other channels
from Surf lists.
PAUSE
STOP
PLAY
OK
ALTERNATE CHANNEL
5
Your remote also has an A/CH (Alternate
Channel) button. Pressing this button will tog-
gle between the current and one previously
selected channel.
22
1
28
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE QUADRASURF™ BUTTONS
he QuadraSurf™ buttons on your remote
Tcontrol allow you to store up to 10 chan-
nels per button (40 total). This is a great fea-
ture if you want to store all your favorite
Sports channels, Movie channels, or News
channels in one surf list. Family members can
have there own favorite list of channels. You
can even program the external A/V Input
jacks (Front channel) for one of the buttons
making it a “source” button for your external
accessory devices.
12
12
Assuming channels have now been added to
the four QuadraSurf™ lists (the four colored
buttons on the remote, see the previous page),
let’s review how the feature works.
18
22
Press one of the pre-programmed
POWER
COLORED buttons on the remote
(Red, Green, Yellow or Blue). The
screen will display a smiley face with the
first programmed channel for that surf
list.
1
SLEEP
EJECT
TV
28
VCR
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
35
ART SOUND
SMART PICTURE
While the colored “smiley” face still
appears on the screen, press the same
COLORED button on the remote to
tune the second channel programmed for
TV/DVD
5
2
39
DVD
MENU
1
2
3
MENU
that specific surf list.
41
Repeatedly pressing the same COL-
ORED button while the “smiley” face
appears will tune all the programmed
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
3
56
channels for that specific surf list. After
the last channel is tuned, pressing the
COLORED button again will return you
to the first channel in the list.
2
5
8
0
3
1
99
4
6
7
9
A/CH
If the “smiley” face disappears from the
screen and the same COLORED button
is pressed, the surf channels will be dis-
played starting with the FIRST pro-
grammed channel again.
CC
5
12
Remove Item? - Press
Repeat steps 1-3 for the other three
COLORED buttons (Surf lists) if
desired.
4
Any time the “smiley” face appears
with the channel number, pressing the
“frownie” face button will allow you
to remove it from the list (see the pre-
vious page for more details).
5
29
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - BASIC OPERATION
This section of the Directions for Use manual begins to explain the operating procedures
of the DVD Player portion of this television.
et’s learn the simple operation of the TV’s
Lbuilt-in DVD Player.
Unless otherwise stated, all operations can be
performed by using the remote control.
Press the POWER button on the
remote control (or the TV) to turn the
television ON.
1
2
Press the EJECT button on the
remote control to place the TV/DVD in
the DVD mode. Press the
OPEN/CLOSE button again to open
POWER
the disc tray.
3
1
Place your chosen disc in the tray. Be
sure that the disc label is facing up and
3
4
5
POWER
the disc is centered in the tray.
SLEEP
EJECT
TV
reading stop
--:--:--
--:--:--
Press the EJECT button on the
remote control (or the EJECT button on
the TV) to close the disc tray.
VCR
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
2
4
SMART SOUND
SMART PICTURE
The on-screen display will indicate that
the DVD Player is reading the disc.
Then playback of the disc will begin
automatically.
TV/DVD
DVD
MENU
MENU
reading stop
--:--:--
--:--:--
5
Note: If the “Child Lock” option is set to ON
within the User Preference Settings section,
the 4-digit access code must be entered or the
disc must be authorized. (See the “Access
Control” section within this manual.)
OK
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
2
5
8
0
3
1
A default screen is displayed when the DVD
Player is in the STOP mode. It may contain a
“Status Window” and a “Temporary Feedback
Field.” This screen gives information concern-
ing prohibited actions, playback, modes,
available angles, etc.
4
6
7
9
A/CH
CC
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - MENU BAR OPERATION
GENERAL EXPLANATION
X
his manual gives the basic instructions for
Toperating this DVD Player. Some DVD’s
When the “X” icon appears on
require specific operation or allow only limit-
ed operation during playback. In these cases,
the player may not respond to all operating
commands. When this occurs, please refer to
the instructions contained with the DVD
(disc). When the symbol X appears on the
TV screen, the operation is not permitted by
the player or the disc.
the TV screen, it means the function
cannot be preformed or is not an
available option for that disc.
Unless otherwise stated, all operations can
be performed by using the remote control.
off
1en
MENU BAR OPERATION
Press the SYSTEM MENU (OSD)
button to display the DVD Player’s
on-screen menu.
play
DVD
2:45:23
0:00:34
no
off
play
DVD
2:45:23
0:00:34
1
2
User Preference Settings
Press the CURSOR RIGHT or
LEFT button to highlight and select
Menu Bar options: User Preference
Frame by Frame
POWER
4
1
Setting, Current Subtitle Language,
Current Audio Language, Sound
mode, Frame by Frame, Slow
Motion, Scan Speeds, Enlarge
Picture, Title, Chapter, Angle, Time
Search, or Favorite Track Selection.
See option icons at lower right of this
page.
SLEEP
EJECT
TV
1
4
off
VCR
MODE
SYSTEM MEN
OSD
play
DVD
2:45:23
0:00:34
AUDIO
REPEAT REPEAT A-B SUBTITLE
SMART SOUND
SMART PICTURE
TV/DVD
Title
2
2
DVD
MENU
MENU
Some of these options, along with a
few others, can also be selected direct-
ly from the remote control through
dedicated function buttons.
3
Menu Bar Icons
User Preference Settings
Current Subtitle Language
Current Audio Language
Frame by Frame
Slow Motion
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
Rpeatedly pressing the SYSTEM
MENU (OSD) button while the on-
screen menu is displayed will remove
4
2
5
8
0
3
1
4
6
Scan Speeds
7
9
Angle
A/CH
CC
Enlarge Picture (Zoom)
Title
Chapter
Time Search
Favorite Track Selection
31
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - USER PREFERENCE SETTINGS
PICTURE
Many of the DVD Player’s features can be set
to suit your personal preference. Let’s start by
looking at the PICTURE features.
off
1en
play
DVD
2:45:23
0:00:34
off
1en
Press the SYSTEM MENU (OSD)
button on the remote control to dis-
Black Level shift
OFF
Video shift
1
2
3
4
5
User Preference Settings
play the on-screen menu.
Press the CURSOR LEFT or
RIGHT until the User Preference
Settings Icon
is highlighted.
POWER
9
1
Press the CURSOR DOWN button
to highlight the Picture Icon
SLEEP
EJECT
TV
off
1en
.
VCR
MODE
SYSTEM MENU
OSD
Black Level shift
On
Off
Video shift
Press the CURSOR RIGHT button
to highlight the first Picture feature
option “Black level shift”.
DIO
REPEAT REPEAT A-B SUBTITLE
6
7
T SOUND
SMART PICTURE
4
2
TV/DVD
5
Press the CURSOR UP or DOWN
button to select and highlight the fea-
ture you wish to change. Choose Black
level shift, or Video shift.
DVD
MENU
MENU
2
8
off
1en
VOL
C
Press the CURSOR RIGHT button
to display the options for the selected
Picture feature.
Black level shift: Select ON or OFF.
When ON, richer color contrasts are
obtained.
Video shift: The factory centers the
video picture on the TV’s screen.
Video Shift will let you position the
picture by pressing the Cursor Right or
Left. Press OK when finished.
Black Level shift
MUTE
PAUSE
3
Video shift
OK
STOP
PLAY
6
OK to exit
5
7
2
5
8
0
3
1
4
6
7
9
A/CH
CC
Press the CURSOR UP or DOWN
buttons to scroll and highlight the
options of the selected feature.
7
8
9
Press the OK button to select or acti-
vate the chosen option.
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - USER PREFERENCE SETTINGS
SOUND
The Personal Preference area of the menu has
various SOUND features to customize and com-
pliment your viewing and listening pleasure.
off
1en
play
DVD
2:45:23
0:00:34
off
1en
Press the SYSTEM MENU (OSD)
button on the remote control to display
the on-screen menu.
Black Level shift
Video shift
On
1
2
3
4
5
User Preference Settings
Press the CURSOR LEFT or RIGHT
until the User Preference Settings
Icon
is highlighted.
POWER
9
1
Press the CURSOR DOWN button to
highlight the Sound Icon
SLEEP
EJECT
TV
.
off
1en
1en
1en
1en
1en
VCR
MODE
SYSTEM MENU
OSD
Digital output
Night mode
All
Off
Off
Press the CURSOR RIGHT button to
highlight the first Sound feature option
“Digital output”.
AUDIO
REPEAT REPEAT A-B SUBTITLE
Karaoke vocal
SMART SOUND
SMART PICTURE
TV/DVD
2
Press the CURSOR UP or DOWN
button to select and highlight the feature
you wish to change. Choose Digital
output, Night mode, or Karaoke vocal.
DVD
MENU
MENU
OK
off
Digital output
Night mode
All
Off
Off
8
2
Press the CURSOR RIGHT button to
display the options for the selected
Picture feature.
VOL
Karaoke vocal
MUTE
PAUSE
OK
STOP
3
6
4
6
5
Digital output: Select Off (If using none
of the digital outputs), PCM only (If
your external equipment does not include
a digital multi-channel decoder), or All
(If using a digital multi-channel decoder,
both coaxial and optical outputs are
switched on.).
2
5
8
0
1
7
4
off
7
9
A/CH
Digital output
Night mode
Off
CC
PCM only
All
Karaoke vocal
Night mode: Select On (Optimizes the
dynamics of the sound with low volume
playback), or Off.
Karaoke vocal: Select On (Set to on
only when using a multi-channel karaoke
DVD), or Off.
off
Digital output
Night mode
Karaoke vocal
Press the CURSOR UP or DOWN
buttons to scroll and highlight the
options of the selected feature.
On
Off
7
8
9
Press the OK button to select or acti-
vate the chosen option.
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
off
Digital output
Night mode
Karaoke vocal
On
Off
33
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - USER PREFERENCE SETTINGS
LANGUAGE
Many DVDs are capable of multi-lingual set-
off
1en
tings. The Language feature within the Personal
Preference area of the DVD on-screen menu
will let the user set the Audio and Subtitle
language.
play
DVD
2:45:23
0:00:34
off
1en
Black Level shift
Video shift
On
User Preference Settings
Press the SYSTEM MENU (OSD) but-
ton on the remote control to display the
on-screen menu.
1
2
3
4
5
Press the CURSOR LEFT or RIGHT
until the User Preference Settings
POWER
9
1
Icon
is highlighted.
SLEEP
EJECT
TV
off
1en
1en
1en
1en
VCR
MODE
Press the CURSOR DOWN button to
highlight the Language Icon
SYSTEM MENU
OSD
Audio language
English
English
.
Subtitle
AUDIO
REPEAT REPEAT A-B
Press the CURSOR RIGHT button to
highlight the first Language feature
option “Audio language.”
7
SMART SOUND
SMA
TV/DVD
5
2
DVD
MENU
MENU
Press the CURSOR UP or DOWN but-
ton to select and highlight the feature
you wish to change. Choose Audio lan-
guage or Subtitle.
off
Audio language
English
English
Subtitle
8
2
VOL
MUTE
PAUSE
3
OK
STOP
4
6
Press the CURSOR RIGHT button to
display the options for the selected
Picture feature.
5
6
2
5
8
0
1
7
Audio language: Choose from a list
including; English, Español, Français,
Português, Italiano, Russian, Deutsh,
Greek, Japanese, Korean, Chinese,
Quechua, Guaraní, Aymará, or Inupiaq.
Subtitle: Select from the same list of
languages listed under Audio language.
Will change the subtitle test only.
4
off
7
9
A/CH
Audio language
English
Espanól
Français
CC
Subtitle
NOTE: Audio language and Subtitle
options are available only if the DVD
being used has these capabilities.
off
Press the CURSOR UP or DOWN but-
tons to scroll and highlight the options of
the selected feature.
Audio language
Subtitle
English
Espanól
Français
7
8
9
Press the OK button to select or acti-
vate the chosen option.
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - USER PREFERENCE SETTINGS
FEATURES
off
1en
off
1en
The Features section of the Personal Preference
options contain an area where an Access Code
and Parental censoring can be set. There also
are features that can be turned On or Off
(Access Control, Status Window, Low Power
Standby, PBC - Playback Control, and Help
text).
play
DVD
2:45:23
0:00:34
Black Level shift
Video shift
On
User Preference Settings
off
1en
Press the SYSTEM MENU (OSD) but-
POWER
9
1
Access control
Status window
Low power standby
PBC
Enter code...
ton on the remote control to display the
On
On
On
On
1
SLEEP
EJECT
on-screen menu.
TV
VCR
MODE
SYSTEM MENU
OSD
Help text
Press the CURSOR LEFT or RIGHT
REPEAT REPEAT A-B SUBTITLE
until the User Preference Settings
7
2
Icon
is highlighted.
SND
SMART PICTURE
TV/DVD
5
off
1en
1en
1en
1en
2
Press the CURSOR DOWN button to
highlight the Features Icon
DVD
MENU
Access control
Status window
Low power standby
PBC
Enter code...
MENU
On
On
On
On
.
3
Press the CURSOR RIGHT button to
highlight the first Features option
“Access code.”
Help text
8
2
VOL
4
MUTE
PAUSE
3
OK
STOP
4
6
off
Press the CURSOR UP or DOWN
button to select and highlight the fea-
ture you wish to change. Choose Access
control, Status window, Low power
standby, PBC or Help text .
5
Access control
Status window
Low power standby
PBC
2
5
8
0
1
[ ] [ ] [ ] [ ]
Enter code
5
6
7
4
7
9
Help text
A/CH
CC
Press the CURSOR RIGHT button to
display the options for the selected
Picture feature.
off
Access control
Status window
Low power standby
PBC
On
Access control: Requires a four digit
code to enter. Select Child Lock
(locked or unlocked), Parental level
(Rating 1 to 8 for scenes not suitable for
children), Change Country, or Change
Code.
Status window: Select On or Off.
Low power standby: Select On (will
put the set into the lower power standby
mode), or Off.
PBC (Playback Control): Select On to
allow viewing of main screen when play-
ing a PBC featured Video CD, or Off for
playback without use of the main screen.
Help text: Select On to display a bar of
text describing selected icons in the Main
menu bar.
Off
Help text
off
Access control
Status window
Low power standby
PBC
On
Off
Help text
off
1en
Access control
Status window
Low power standby
PBC
On
Off
Press the CURSOR UP or DOWN but-
tons to scroll and highlight the options
of the selected feature.
Help text
7
off
1en
Press the OK button to select or acti-
Access control
Status window
Low power standby
PBC
vate the chosen option.
8
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
On
Help text
Off
9
35
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - USER PREFERENCE SETTINGS
ACCESS CODE
off
1en
When using and making changes within the
Access Control option of the Features sub-
menu, an ACCESS CODE will have to entered
before any new settings can be made. This page
discusses how to set the Access Code to allow
changes to this section of the on-screen menu.
off
1en
play
DVD
2:45:23
0:00:34
Black Level shift
On
Video shift
User Preference Settings
Press the SYSTEM MENU (OSD) but-
ton on the remote control to display the
1
on-screen menu.
off
1en
Press the CURSOR LEFT or RIGHT
POWER
11
Access code
Status window
Low power standby
PBC
Enter code...
until the User Preference Settings
On
On
On
On
2
EJECT
Icon
is highlighted.
1
TV
SYSTEM MENU
OSD
8
5
4
2
Press the CURSOR DOWN button to
highlight the Features Icon
Help text
9
.
REPEAT REPEAT A-B SUBTITLE
3
7
Press the CURSOR RIGHT button to
highlight the first Features option
“Access code.”
UND
SMART PICTURE
TV/DVD
off
1en
4
5
Access code
Status window
Low power standby
PBC
Enter code...
DVD
MENU
MENU
2
On
On
On
On
Press the CURSOR RIGHT button,
the screen will read, “[ ] [ ] [ ] [ ]
Enter code.”
5
6
Help text
Choose a four digit code and enter it by
pressing the NUMBERED buttons on
the remote control. The on-screen
menu will ask to “Confirm code.” Re-
enter your chosen four digit access
code. The on-screen menu will display
the Child lock, Parental level, Change
country, and Change code options.
CH
3
MUTE
PAUSE
STOP
PLAY
off
1en
1en
1en
6
7
Access code
Status window
Low power standby
PBC
2
5
8
0
3
9
4
• • • [ ]
Enter code
6
Help text
7
9
A/CH
CC
NOTE: 0, 7, 7, 1 is the default code.
Press the CURSOR UP or DOWN
off
button to select and highlight the
Access code
Status window
Low power standby
PBC
7
[ ] [ ] [ ] [ ]
Confirm code
option you wish to change.
Press the CURSOR RIGHT button
to enter the highlighted option choices.
Help text
8
Press the CURSOR UP or DOWN
button to choose one of the choices.
9
off
Press the OK button to select or acti-
vate the chosen option.
Access code
Status window
Low power standby
PBC
Child Lock
Parental level
Change country
Change code
10
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
Help text
11
Parental Level: (Ratings 1 to 8)
The disc contains scenes not suitable for children. If you set a rating for the player, all scenes with the same rating or lower will be played. Higher rated scenes
will not be played unless an alternative is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found,
playback will stop and the 4-digit code has to be entered.
Parental Control Disclaimer:
This DVD player features the Parental Control system which is intended to activate when playing DVD discs furnished with certain software coding. This is
according to technical standards adopted by the set maker and disc content industries. Please note that the Parental Control system will not operate a DVD disc
which is not furnished with the appropriate software coding. Also note that at the time of release of this TV/DVD Player, certain aspects of the technical stan-
dards had not been settled between the set maker and the disc industries.
On this basis Philips Consumer Electronics cannot guarantee functioning of the Parental Control system and denies any liability with unintended watching of
disc content.
If in doubt, please make sure the disc plays according to your parental Control settings before you allow children access.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - PLAYING A DISC
AUTHORIZING DISCS
hen the Child Lock or Parental Level
Wcontrols are on and a disc containing
material that will be blocked is inserted, the
2
disc must first be authorized before playback
can occur.
With the TV/DVD Player turned on,
press the EJECT button on the
1
2
3
remote control or TV.
Place the disc in the disc tray and press
the EJECT button on the remote con-
POWER
trol or TV.
If the disc has a rating equal to or high-
er than the level allowed, the child pro-
tect “Access control” dialog box will
appear. Press the CURSOR UP or
DOWN button to select Play once or
Play always.
1
3
5
1
POWER
reading stop
--:--:--
--:--:--
SLEEP
EJECT
TV
Play once: The disc can be played as long
as it is in the player and the player is ON.
Play always: The disc will become child
safe (or authorized) and can be played, even
if the Child Lock control is set to ON.
VCR
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
SOUND
SMART PICTURE
3
TV/DVD
Press the NUMBERED buttons on
DVD
MENU
MENU
the remote to enter your four digit
4
Access Code. The Disc will begin to
play or bring you to a “disc menu”
where you might have to select play.
locked
Access Control
6
Play once
Play always
[
[
]
]
[
[
]
]
[
[
]
]
[
[
]
]
VOL
C
MUTE
PAUSE
K
STOP
PLAY
Choose "Play always" to insert the disc in
the child-safe list
DEAUTHORIZING A DISC:
2
5
8
0
3
1
Place the disc in the disc tray and press
the EJECT button. Playback will
begin automatically.
4
6
5
6
7
9
A/CH
Press the STOP ■ button on the
remote control while the smiley face is
visible. The frownie face will appear
and the disc is then deauthorized.
CC
locked
Access Control
4
Play once
•
•
[
[
]
]
[
[
]
]
Play always
[
]
[
]
Choose "Play always" to insert the disc in
the child-safe list
37
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - PLAYING A DISC
PLAYING A DVD
OR VIDEO CD
fter inserting a DVD or Video CD and
Aclosing the tray, playback will start auto-
matically and the Status Window will show the
type of disc loaded and the discs playing time.
You may be asked to select an item from a
menu on the disc itself. Use the CURSOR but-
tons to navigate the disc menu and press the
OK button to activate your selection.
Press the PLAY ᮣ button to start the
playback of a DVD or Video CD. (Will
generally start up to the Disc Menu.
this menu will be different for every
disc. Select the play movie option.)
1
DVD Player will read the disc.
Press the STOP ■ button on the
remote control to stop the playback of
a DVD or Video CD and return to the
Status Window.
POWER
2
reading stop
--:--:--
--:--:--
SLEEP
EJECT
TV
VCR
MODE
SYSTEM MENU
OSD
Press the PAUSE II button on the
remote control to temporarily suspend
AUDIO
REPEAT REPEAT A-B SUBTITLE
3
playback. Additional pressing of the
PAUSE II button will advance the
SMART SOUND
SMART PICTURE
TV/DVD
playback one picture at a time.
reading stop
--:--:--
--:--:--
DVD
MENU
MENU
Press the PLAY ᮣ button on the
remote control to continue normal
playback of the disc.
4
5
4
1
3
When finished, press the STOP ■
VOL
CH
button to stop playback of the disc and
MUTE
PAUSE
OK
STOP
PLAY
return to the Status Window.
2
5
8
0
3
1
Fantasic Studios Present....
6
4
7
9
A/CH
CC
A MOVIE
Playback of disc will start automatically.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - GENERAL FEATURES
MOVING TO ANOTHER
POWER
1
1
2
3
4
4
4
off
off
off
TITLE OR TRACK
SLEEP
EJECT
TV
4
play
DVD
hen a disc has more than one Title or
WTrack you can move to another Title or
Track by the following steps:
VCR
MODE
2:45:23
0:00:34
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
With a disc in the tray:
T SOUND
SMART PICTURE
3
TV/DVD
play
DVD
Press the SYSTEM MENU (OSD)
2:45:23
0:00:34
DVD
MENU
MENU
button to display the DVD Player’s
1
on-screen menu.
Press the CURSOR RIGHT button
until the “T” is highlighted.
play
DVD
VOL
CH
2
2
2:45:23
0:00:34
MUTE
PAUSE
STOP
PLAY
3
Press the CURSOR UP or DOWN
button to select any other available
3
2
5
8
0
3
1
Titles or Tracks.
4
6
Press the SYSTEM MENU (OSD)
button to clear the mennu from the
7
9
4
A/CH
screen.
CC
MOVING TO ANOTHER
CHAPTER OR INDEX
When a disc has more than one Chapter or a
track has more than one Index, you can move
to another Chapter or Index by the following
steps:
POWER
1
4
1
4
off
SLEEP
EJECT
TV
play
DVD
VCR
MODE
2:45:23
0:00:34
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
1
5
off
off
off
T SOUND
SMART PICTURE
3
Press the SYSTEM MENU (OSD)
TV/DVD
play
DVD
button to display the DVD Player’s
2:45:23
0:00:34
1
DVD
MENU
MENU
on-screen menu.
Press the CURSOR RIGHT button
until the “C” is highlighted.
1
6
2
play
DVD
VOL
CH
2
2:45:23
0:00:34
Press the CURSOR UP or DOWN
MUTE
PAUSE
STOP
PLAY
button to select any other available
3
3
Chapters or Index.
2
5
8
0
3
1
1
7
Press the SYSTEM MENU (OSD)
4
6
button to clear the mennu from the
play
DVD
4
2:45:23
0:00:34
screen.
7
9
A/CH
CC
Chapter
39
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - GENERAL FEATURES
POWER
STILL PICTURE/PICTURE BY
PICTURE PLAYBACK
SLEEP
EJECT
TV
VCR
hen a disc has more than one Title or
WTrack you can move to another Title or
Track by the following steps:
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
SMART SOUND
SMART PICTURE
TV/DVD
With the disc playing, press the
PAUSE button. The playback will
DVD
MENU
MENU
1
2
3
freeze the picture on the screen.
Press the PAUSE button repeatedly
to advance the playback of the disc
3
“picture by picture.”
VOL
CH
MUTE
PAUSE
OK
STOP
PLAY
Press the PLAY button to resume nor-
mal disc playback.
2
5
8
0
3
1
1
2
4
6
7
9
A/CH
CC
SEARCH
POWER
FORWARD OR REVERSE
5
off
1en
st
SLE
EJECT
TV
Press the SYSTEM MENU (OSD)
button to display the on-screen menu
1
play
DVD
VCR
MODE
2:45:23
0:00:34
YSTEM MENU
OSD
1
bar.
6
AUDIO
REPEAT REPEAT A-B SUBTITLE
Press the CURSOR RIGHT button to
User Preference Settings
SMART SOUND
SMART PICTURE
4
2
select
(Fast Motion) in the on-screen
6
4
2
TV/DVD
menu bar.
DVD
MENU
MENU
Press the CURSOR DOWN button to
display the Fast Motion options.
3
no
off
Press the CURSOR RIGHT or LEFT
buttons to select one of the Fast Motion
options (-32, -8, -4 reverse or +4, +8,
+32 forward). Select 1 for normal view-
ing speed.
play
DVD
4
2:45:23
0:00:34
7
VOL
CH
MUTE
PAUSE
STOP
PLAY
3
Scan Speeds
Press the SYSTEM MENU (OSD) but-
ton to remove the on-screen menu bar
from the TV screen.
2
5
8
0
3
1
5
6
7
4
6
Press the FORWARD or REVERSE
buttons to search through the disc at the
speed you set.
7
9
A/CH
no
off
CC
-32 -8 -4
1
4
8
32
play
DVD
Press the PLAY button to resume nor-
mal playback of the disc.
2:45:23
0:00:34
Scan Speeds
NOTE: Pressing the ᮣᮣ or the ᮤᮤ buttons
repeatedly will toggle the search OFF, x4, or x32.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - GENERAL FEATURES
REPEAT
REPEAT A-B
POW
7
title
epeat chapter/Title/Index on DVD Video
SLEEP
6
Rdiscs, or repeat Tracks or the disc on Video
TV
VCR
MODE
CDs.
SY
5
AUDIO
REPEAT REPEAT A-SUBTITLE
Press the REPEAT button once to
repeat the playback of the current
chapter
1
ART SOUND
SMART PICTURE
chapter.
TV/DVD
1
2
3
4
DVD
MENU
Press the REPEAT button twice to
repeat playback of the current title.
MENU
2
repeat
Press the REPEAT button a third time
to repeat the entire disc.
3
VOL
CH
MUTE
PAUSE
Press the REPEAT button a fourth
time to exit the Repeat mode.
OK
STOP
PLAY
4
2
5
8
0
3
1
Press the REPEAT A-B button at your
chosen starting point. A- will appear
briefly on the screen.
4
6
5
7
9
A/CH
Press the REPEAT A-B button again at
CC
your chosen ending point. A-B will
6
A-
appear briefly on the display and the
chosen length of playback will be
repeated.
To exit the repeating sequence, press the
REPEAT A-B button again.
A-B
7
41
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - GENERAL FEATURES
POWER
TIME SEARCH
6
1
off
1en
st
he Time Search control allows you to start
SLEEP
EJECT
TV
Tthe playback at any chosen time on the disc
play
DVD
VCR
MODE
2:45:23
0:00:34
SYSTEM MENU
OSD
Press the SYSTEM MENU (OSD) but-
AUDIO
REPEAT REPEAT A-B SUBTITLE
ton to display the on-screen menu bar.
1
1
4
4
4
off
off
off
SMART SOUND
SMART PICTURE
TV/DVD
Press the CURSOR RIGHT button
play
DVD
2
until the Time Search
lighted.
Icon is high-
2:45:23
0:00:34
DVD
MENU
MENU
2
3
4
5
6
Press the CURSOR DOWN button to
display the “time edit” box. The player
will pause the playback of the disc.
1
0:00:00
5
play
DVD
VOL
CH
2:45:23
0:00:34
MUTE
PAUSE
OK
STOP
Press the NUMBERED buttons to
enter a specific time (hour/minutes/sec-
onds).
3
2
5
8
0
3
1
1
4
4
6
1:28:30
play
DVD
Press the OK button to confirm the
time and begin playback at that moment
on the disc.
2:45:23
0:00:34
7
9
A/CH
CC
Time search
Press the SYSTEM MENU (OSD) but-
ton to remove the on-screen menu bar
from the TV screen.
ENLARGE PICTURE (ZOOM)
The Enlarge Picture (Zoom) control allows you
to enlarge the video image and pan through the
enlarged image.
OWER
7
1
off
1en
st
SLEEP
EJECT
TV
VCR
MODE
play
DVD
2:45:23
0:00:34
SYSTEM MENU
OSD
Press the SYSTEM MENU (OSD) but-
ton to display the on-screen menu bar.
AUDIO
REPEAT REPEAT A-B SUBTITLE
1
no
off
SMART SOUND
SMAR
Press the CURSOR RIGHT button
5
TV/DVD
until the Zoom
Icon is highlighted.
play
DVD
2
3
2:45:23
0:00:34
5
DVD
MENU
MENU
Press the CURSOR UP or DOWN
buttons to select the desired zoom factor
(1.33, 2 or 4). The player will pause the
disc and the selected zoom factor will be
displayed below the Zoom Icon in the
menu bar. The picture will reformat itself
according to the selected zoom factor.
no
1.33
Press OK to pan
2
5
play
DVD
VOL
2:45:23
0:00:34
4
5
MUTE
PAUSE
OK
STOP
PLAY
2
5
8
0
3
1
no
1.33
Press the OK button to confirm the
selection. The “panning” icon will
appear on the screen.
6
play
DVD
4
6
4
2:45:23
0:00:34
OK
7
9
A/CH
Use the CURSOR UP, DOWN, Right
or LEFT buttons to pan the image.
CC
Enlarge Picture
5
6
7
Press the PLAY button to resume nor-
mal playback of the disc.
Press the SYSTEM MENU (OSD) but-
ton to remove the on-screen menu bar
from the TV screen.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - GENERAL FEATURES
FAVORITE TRACK SELECTION -
OWER
VIDEO
11
off
1en
he FTS-Video control allows you to store
Tyour favorite titles/chapters (DVD) and
favorite tracks/indexes (Video CD) for a par-
ticular disc in the players memory.
SL
EJECT
TV
1
play
DVD
VCR
MODE
2:45:23
0:00:34
SYSTEM MENU
OSD
9
6
4
AUDIO
REPEAT REPEAT A-B SUBTITLE
Storing a FTS-Video Program:
User Preference Settings
SMART SOUND
SMART PICTURE
TV/DVD
Press the SYSTEM MENU (OSD) but-
DVD
MENU
MENU
ton on the remote control to display the
on-screen menu.
1
1
4
off
10
7
2
4
7
9
Press the CURSOR RIGHT button
play
DVD
2:45:23
0:00:34
until the Video FTS
Icon is high-
OL
2
3
4
MUTE
PAUSE
lighted.
OK
STOP
PLA
3
Favorite Track Selection
Press the CURSOR DOWN button to
highlight the FTS portion of the
Favorite Track Selection dialogue box.
5
63 8
2
5
8
0
1
4
7
9
Press the CURSOR RIGHT or LEFT
button to turn the FTS control ON or
OFF.
A/CH
CC
1
4
off
Favorite Track Selection
On
1
Off
2
FTS
Title
3
Chapter
Program
Storing Titles/Chapters:
Clear all
Press the CURSOR DOWN button to
select Titles.
5
6
7
Press the CURSOR RIGHT or LEFT
buttons to select the desired title
number.
1
4
off
Favorite Track Selection
Press the OK button if you wish to
store the entire title. The title number
will be added to the list of selections.
On
1
Off
FTS
Title
2
3
3
Chapter
Program
1
2
4
5
6
7
8
1
Clear all
Storing Chapters:
Press the CURSOR DOWN button
on the selected title number.
8
9
10
11
Press the CURSOR RIGHT or LEFT
button to select the desired chapter
number.
Favorite Track Selection
On
1
Off
2
2
FTS
Title
Chapter
Program
3
3
1
4
5
6
7
8
Press the OK button to select or acti-
vate the chosen option.
1
Clear all
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
The Favorite Track Selection feature can be turned ON
or OFF. Choose Tiles or Chapters to be added to the
Program List in the order you want them to appear
(Up to 20 selections per program).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - GENERAL FEATURES
ERASING A FAVORITE TRACK
SELECTION
11
7
he FTS-Video control also allows you to
Tcustomize or erase programming set up in
the Favorite Track Selection memory of the
TV/DVD Player.
POWER
off
1en
6
EJECT
TV
play
DVD
VC
2:45:23
0:00:34
1
Erasing a FTS-Video Program:
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
8
4
2
Press the SYSTEM MENU (OSD) but-
ton on the remote control to display the
on-screen menu.
User Preference Settings
SMART SOUND
SMART PICTURE
1
2
3
4
5
6
TV/DVD
4
DVD
MENU
MENU
Press the CURSOR RIGHT button
until the Video FTS
Icon is high-
1
4
on
10
5
lighted.
play
DVD
2:45:23
0:00:34
OL
CH
Press the CURSOR DOWN button to
select “Program.”
MUTE
PAUSE
3
9
OK
STOP
PLAY
Favorite Track Selection
Press the CURSOR RIGHT or LEFT
button to select the number you wish to
erase from the program.
2
5
8
0
3
1
4
6
7
9
Press the OK button to erase the
selection.
A/CH
1
4
off
CC
Favorite Track Selection
On
1
Off
FTS
Title
2
3
3
Press the SYSTEM MENU (OSD)
button to remove the menu bar from
the TV screen.
Chapter
Program
1
2
1.3
4
5
6
7
8
1
Clear all
Erasing All Selections from a FTS-Video
Program:
Press the SYSTEM MENU (OSD)
button to display the on-screen menu
bar.
1
4
off
Favorite Track Selection
1
4
off
Favorite Track Selection
7
8
On
Off
On
1
Off
FTS
Title
FTS
Title
1
1
1
2
3
3
2
3
3
Chapter
Program
2
1.3
4
5
6
7
8
Chapter
Program
1
1
2
1.3
4
5
6
7
8
Press the CURSOR RIGHT button to
Clear all
Clear all
select the Video FTS Icon in the
menu bar.
Press the CURSOR DOWN button to
select “Clear All”.
9
1
4
off
Favorite Track Selection
Press the OK button to select or acti-
vate the chosen option.
On
1
1
[
Off
FTS
Title
10
2
3
3
Chapter
Program
2
4
5
6
7
8
]
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
Clear all
11
44
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - SPECIAL FEATURES
TITLE/CHAPTER/DISC
POWER
MENUS
SLEEP
EJECT
TV
or titles and chapters, selection menus may
Fbe included on the disc. The DVD’s menu
feature allows you to make selections from
these menus. Press the appropriate numerical
buttons or use the CURSOR UP/DOWN,
RIGHT/LEFT buttons to highlight your selec-
tion, then press the OK button to confirm.
Fantasic Studios Present....
A MOVIE
VCR
MODE
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
1
2
SMART SOUND
SMART PICTURE
TV/DVD
DVD
MENU
MENU
With the disc playing, press the DVD
MENU button to display the Disc
menu will be displayed.
1
Titles
Chapters
Extras
Play
VOL
CH
The Title/Chapter/Disc Menu can list
various features such as Camera Angles,
Spoken Language, Subtitle Options,
Chapter lists, or any Bonus Material
specific to each disc.
MUTE
PAUSE
OK
STOP
PLAY
2
5
8
0
3
1
4
6
Press the DVD MENU button again to
resume playback.
7
9
A/CH
Disc Menus are specific to each disc. The features
available are determined by the disc manufacturer.
The features could vary widely from disc to disc.
Use the CURSOR UP, DOWN, RIGHT, or LEFT to
move to any listed feature, then press the OK button
to select and activate that feature.
2
CC
CAMERA ANGLE
POWER
f the disc contains sequences recorded from
Idifferent camera angles, the angle icon
appears, showing the number of available
angles and the angle being shown currently.
You can then change the camera angle. (Not
all disc contain this type of information, so
this feature may not be available on the disc
your using.)
1
no
off
SLEEP
EJECT
TV
play
DVD
4
VCR
MODE
2:45:23
0:00:34
SYSTEM MENU
OSD
AUDIO
REPEAT REPEAT A-B SUBTITLE
Angle
SMART SOUND
SMART PICT
TV/DVD
3
DVD
MENU
MENU
Press the SYSTEM MENU (OSD)
button on the remote control to display
1
2
3
the on-screen menu.
2
off
2
play
DVD
Press the CURSOR RIGHT button
2:45:23
0:00:34
CH
until the Angle
Icon is highlighted.
MUTE
PAUSE
3
OK
STOP
PLAY
If the disc has different angles the icon
will be selectable. Press the CURSOR
UP or DOWN button to select the
desired camera angle.
Angle
2
5
8
0
3
1
4
6
NOTE: The Camera Angle feature may not be
available on the DVD or Video CD you are
using. If it is not the X icon will appear on the
screen when the ANGLE button is pressed.
7
9
A/CH
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
CC
4
45
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - SPECIAL FEATURES
AUDIO LANGUAGE
POWER
off
1en
he following steps describe how to change
Tthe Audio Language control.
SLEE
EJECT
TV
play
DVD
VCR
MODE
2:45:23
0:00:34
1
SYSTEM MENU
OSD
Press the AUDIO button. The
AUDIO
REPEAT REPEAT A-B SUBTITLE
onscreen menu will be displayed with the
1
2
3
Current Audio Language
Audio Language
Icon highlighted.
OUND
SMART PICTURE
TV/DVD
3
2
Press the CURSOR UP or DOWN
button repeatedly to scroll and select
the available language options.
DVD
MENU
MENU
Press the SYSTEM MENU (OSD)
button to clear the on-screen menu
from the TV screen.
VOL
CH
MUTE
PAUSE
OK
STOP
P
2
2
5
8
0
3
1
4
6
7
9
A/CH
CC
SUBTITLES
POWER
he following steps describe how to change
Tthe Subtitle Language control.
1en
1en
SLEEP
EJECT
3
TV
VCR
MODE
play
DVD
2:45:23
0:00:34
Press the SUBTITLE button on the
SYSTEM MENU
OSD
remote control to display the on-screen
menu bar with the Subtitle Icon
highlighted.
1
AUDIO
REPEAT REPEAT A-B SUBTITLE
Current Subtitle Language
T SOUND
SMART PICTURE
2
TV/DVD
Press the CURSOR UP or DOWN
DVD
MENU
MENU
2
button repeatedly to scroll and select
the available Subtitle options. Subtitles
will automatically appear at the bottom
of the screen. Or, choose OFF.
2
VOL
CH
MUTE
PAUSE
Press the SYSTEM MENU (OSD)
OK
STOP
P
button to clear the on-screen menu
from the TV screen.
2
3
2
5
8
0
3
1
4
6
7
9
A/CH
CC
46
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - SPECIAL VIDEO CD FEATURE
PLAYBACK CONTROL (PBC)
ome Video CDs contain information that allow you to control the playback of the disc through a special playback menu.
S
Load a Video CD with Playback control and press the PLAY button to start the disc.
1
2
3
4
5
Go through the menu with the buttons indicated on the TV screen until your chosen passage starts to play. If a PBC menu
consists of a list of title, you can select a title directly.
Enter your choice with the NUMBERED buttons (0-9).
Press RETURN to go back to the previous menu.
PBC can be set to OFF within the Personal Preference menu.
OPERATING THE DVD PLAYER - PLAYING AUDIO CDS
hen an Audio CD is inserted into the
WDVD Player, playback will start auto-
matically. The AUDIO CD dialogue box will
appear on the screen giving information such
as current track, time, total tracks, etc.
POWER
Audio Disk Mode
Time Total Tracks Total Time
Play
Track
1
SLEEP
EJECT
2.78
14
1.12.78
TV
VCR
Press the PLAY button to begin play-
back of an audio disc that has been
paused or stopped.
MODE
SYSTEM MENU
OSD
5
On Off
FTS
1
2
3
4
5
6
AUDIO
REPEAT REPEAT A-B SUBTITLE
1
2
3
4
5
6
7
8
Track
Program
SMART SOUND
SMART PICTURE
Clear all
TV/DVD
Press the STOP button at any time to
suspend playback.
DVD
MENU
MENU
6
Press the PAUSE button to temporari-
ly suspend playback. Press again to
resume playback.
VOL
CH
4
4
MUTE
PAUSE
Press the FORWARD or REVERSE
buttons to search the disc content in
either direction.
OK
STOP
PLAY
2
5
8
0
3
1
Press the REPEAT button to repeat
the playback of a track or the entire
disk.
4
1
3
2
7
9
A/CH
CC
Press the REPEAT A-B button at any
point on the disc. Press again at any
ending point on the disc. The chosen
sequence will be repeated. Press a third
time to exit the repeating sequence.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE DVD PLAYER - PLAYING AUDIO CDS
FAVORITE TRACK SELECTION -
AUDIO CD
TS allows you to store your favorite tracks for
Fa particular disc in the TV/DVD Player mem-
ory. Each FTS program can contain up to 20
tracks.
1
Storing an FTS Program:
Load an audio CD and press the STOP
button.
1
Press the CURSOR DOWN button to
highlight the list of available tracks.
2
Press the CURSOR RIGHT or LEFT
button to highlight a specific track.
3
Or, press the NUMBERED buttons (0-9)
to go directly to any track.
Audio Disk Mode
POWER
Stop
Track
1
Time Total Tracks Total Time
4
2.78
14
1.12.78
SLEEP
EJECT
TV
VCR
MODE
With the track number highlighted, press
the OK button to store the track. Repeat
for other tracks.
SYSTEM MENU
REPEAT REPEAT A
8
On Off
FTS
5
AUDIO
9
7
3
1
2
3
3
3
4
5
6
7
8
Track
Program
SMART SOUND
SRE
Clear all
6
TV/DVD
Switching FTS ON or OFF:
DVD
MENU
MENU
Within the Audio CD dialogue box, press
Audio Disk Mode
Time Total Tracks Total Time
the CURSOR UP or DOWN button to
highlight the ON/OFF area.
6
7
Stop
Track
1
3
7
9
2.78
14
1.12.78
Press the CURSOR RIGHT or LEFT
button to select ON or OFF.
VOL
2
MUTE
PAUSE
On Off
FTS
OK
STOP
P
1
2
4
5
6
7
8
Track
6
Program
Erasing a Track from an FTS Program:
2
5
8
0
3
1
Clear all
8
3
7
9
6
1
Within the Audio CD dialogue box, press
the CURSOR UP or DOWN button to
highlight “program”.
11
7
9
8
9
Audio Disk Mode
Time Total Tracks Total Time
A/CH
Stop
Track
1
CC
2.78
14
1.12.78
Press the CURSOR RIGHT or LEFT
button to select a specific track listed in
the FTS Program.
4
On Off
FTS
1
1
2
4
5
6
7
8
Track
Program
Press the OK button to remove it.
Clear all
Erasing a Complete FTS Program:
Within the Audio CD dialogue box, press
the CURSOR DOWN button until “Clear
All” is highlighted.
10
11
Press the OK button to erase the entire
FTS Program.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
No Power
• Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER but-
ton again.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
• Check to be sure the TV outlet is not on a wall switch.
• Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER but-
ton again.
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
TV Displays Wrong Channel or No
Channels Above 13
No Picture
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL EDIT
control) into the TV’s memory.
• Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels.
• Check antenna connections. Are they properly secured to the
TV's ANT 75Ω plug?
• Check the TUNER MODE control for the correct tuner setting.
• Try running the Auto Program feature to find all available chan-
nels.
No Sound
• Check the VOLUME buttons.
Cleaning and Care
• To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
• Check the MUTE button on the remote control.
• Check the SPEAKER on-screen control. If it is in the OFF posi-
tion, sound at the set will be eliminated.
• If you’re attempting to hook up auxiliary equipment, check the
audio jack connections.
• (If applicable) Check the audio receiver for the correct operating
mode.
• When you are cleaning the TV, take care not to scratch or dam-
age the screen surface (avoid wearing jewelry or using anything
abrasive). Wipe the front screen with a clean cloth dampened
with water. Use even, easy, vertical strokes when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water. Use a clean, dry
cloth to dry the wiped surfaces.
• Never use thinners, insecticide sprays, or other chemicals on or
near the cabinet, as they might cause permanent marring of the
cabinet finish.
Remote Does Not Work
• Check the batteries. If necessary, replace them with AA Heavy
Duty (Zinc Chloride) or Alkaline batteries.
• Clean the remote control and the remote control sensor window
on the TV.
CARE AND CLEANING
WARNING Concerning Stationary Images on the TV
Screen:
Do not leave stationary or letterbox images on screen for
extended periods of time. This can cause uneven picture-
tube aging.
PLACEMENT OF THE TV
• To avoid cabinet warping, cabinet color changes, and increased
chance of set failure, do not place the TV where temperatures
can become excessively hot; for example, in direct sunlight or
near a heating appliance.
• Be sure to allow a free flow of air to and from the perforated
back cover of the set.
Normal use of the TV should involve the showing of pictures that
contain constantly moving and changing images that fill the screen.
Be careful not to leave nonmoving images on screen for extended
periods of time, or to display the same images on screen too fre-
quently, because subtle ghost images can be left on the picture
tubes. Sources of stationary images may be DVD disks, laser disks,
video games, CD-i disks, videotapes, digital television boxes,
broadcast channels, cable channels, satellite channels, and others.
Here are some examples of stationary images (this is not an all-
inclusive list; you may encounter others in your viewing):
CLEANING
• To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, nonscratching duster to keep
the TV clean.
• When cleaning the TV, take care not to scratch or damage the
screen surface. Avoid wearing jewelry or using anything abra-
sive. Do not use household cleaners. Wipe the front screen with
a clean cloth dampened with water. Use even, easy, vertical
strokes when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water and a mild soap or
detergent. Use a clean, dry cloth to dry the wiped surfaces.
• DVD menus—listings of DVD disk content
• Letterbox black bars—shown at the top and bottom of the
TV screen when a wide screen (16:9) movie is viewed on a TV
with standard (4:3) aspect ratio.
• Video-game images and scoreboards
• Television station logos—present a problem if they are bright
and stationary; moving or low-contrast graphics are less likely to
cause uneven aging of the picture tube
• Occasionally vacuum the ventilation holes or slots in the back
cover of the set.
• Never use thinners, insecticide sprays, or other chemicals on or
near the cabinet, as they might cause permanent marring of the
cabinet finish.
• Stock-market tickers—presented at the bottom of the TV
screen
• Shopping channel logos and pricing displays—bright and
shown constantly or repeatedly in the same location on the TV
screen.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY OF TERMS
Auto Programming • The procedure of adding or deleting
Side Audio/Video Inputs • Located on the side of the TV
these connectors (phono type plug) are used for the input of
audio and video signals. Designed for easy use with VCRs or
cameras.
Surf • The action of scanning specific channel in a limited
channel list.
System Menu (OSD) • Allows the user to quickly confirm
what channel number is currently being viewed. Status can also
be used to clear the Television of on screen displays or informa-
tion (rather than waiting for the displays to “time out” or auto-
channel numbers into the Television’s memory circuits. In this
way the Television “remembers’’ only the locally available or
desired channel numbers and skips over any unwanted channel
numbers.
Closed Caption • Broadcast standard which allows you to
read the voice content of television programs on the TV screen.
Designed to help the hearing impaired this feature uses on-
screen "text boxes" to show dialogue and conversations while
the TV program is in progress.
Coaxial Cable • A single solid antenna wire normally matched matically disappear from the screen).
with a metal plug (F-type) end connector that screws (or pushes)
directly onto a 75 Ohm input found on the Television or VCR.
Menu • An on-screen listing of feature controls shown on the
Television screen that are made available for user adjustments.
Tuner Mode • Feature control settings made by the TV.
Designed for first time set up and use. Settings for signal con-
nections (antenna or cable TV), plus channel program memory
are held in the TV's memory (even if the set is unplugged and
moved to a new location.)
On Screen Displays (OSD) • Refers to the wording or mes-
sages generated by the television (or VCR) to help the user with Twin Lead Wire • The more commonly used name for the
specific feature controls (color adjustment, programming, etc.).
two strand 300 Ohm antenna wire used with many indoor and
outdoor antenna systems. In many cases this type of antenna
wire requires an additional adapter (or balun) in order to con-
nect to the 75 Ohm Input terminals designed into the more
recent Televisions and VCRs.
Quadra Surf • The feature that allows the programming of
four separate Surf lists holding up to 10 channels each.
Remote Sensor Window • A window or opening found on
the Television control panel through which infrared remote con-
trol command signals are received.
INDEX
Active Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
AutoLock™
Features Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Lauguage settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Menu Bar Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Moving to Another Chapter or Index . . . . . . . . . . . . . . . . . .39
Moving to Another Title or Track . . . . . . . . . . . . . . . . . . . . .39
Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Playing a Disc - DVD or Video CD . . . . . . . . . . . . . . . . . . .38
Repeat/Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Search Forward or Reverse . . . . . . . . . . . . . . . . . . . . . . . . . .40
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Still Picture/Picture by Picture Playback . . . . . . . . . . . . . . .40
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Title/Chapter/Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Video CD - Playback control (PBC) . . . . . . . . . . . . . . . . . . .47
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Block All Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Block Channels Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Clear All Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Explanation of Auto Lock . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Movie Rating Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
TV Rating Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
AutoPicture™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
AutoProgram™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
AutoSound™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
AVL Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Dynamic Noise Reduction (DNR) Control . . . . . . . . . . . . . . .11
Bass Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Brightness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Format Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Channel Edit Control (Add and Delete Channels) . . . . . . . . . .10 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Closed Caption Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Color Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Contrast + Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Sharpness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
DVD Player Operation
Sleeptimer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Access Code Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Surf/Quadra Surf Controls . . . . . . . . . . . . . . . . . . . . . . . . .28-29
Audio CD Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-48 Timer Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Authorizing/Deauthorizing Discs . . . . . . . . . . . . . . . . . . . . .37 Treble Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Enlarge Picture (Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Erasing a Favorite Track Selection . . . . . . . . . . . . . . . . . . . .44 Welcome/Registration Information . . . . . . . . . . . . . . . . . . . . . .2
Favorite Track Selection - Video . . . . . . . . . . . . . . . . . . . . .43
50
Download from Www.Somanuals.com. All Manuals Search And Download.
RENEWED
90 DAY
LIMITED WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
|