Installation and Assembly:
Floor Stand Carriage for Additional Screens
Model: ACC 604
ACC 604
FPZ-600
Max Load Capacity For Floor Stand With ACC 604:
Four screens at 200 lb (90.7 kg) each
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List
Description
Qty. Part #
carriage
adapter plate
5/16-24 x 1/4" set screw
1
2
4
4
4
4
4
4
4
4
4
1
1
201-1020
A
B
C
D
E
F
G
H
I
201-1022
520-9566
510-9554
520-9262
520-1128
520-9402
510-9109
504-9012
504-9020
590-5005
560-9716
560-9646
A
M6 x 20 mm serrated washer head socket pin screw
M10 x 15 mm socket head screw
M6 x 12 mm phillips screw
M6 x 20 mm phillips screw
M6 x 30 mm phillips screw
M4 x 10 mm phillips screw
M4 x 20 mm phillips screw
.198" ID x .313" OD x .437" H retaining spacer
6 mm non-security allen wrench
4 mm security allen wrench
B
J
K
L
M
E
C
D
K
L
M
H
I
J
F
G
For customer care call (800) 729-0307 or (708) 865-8870.
Make sure previously installed carriage and screen(s) are positioned low enough to allow carriage (A) and additional
screen(s) to be installed. Slide carriage (A) onto main tubes. Slide carriage to desired height and secure using four
set screws (C) as shown in figure 1 and detail 1. Tighten screws using 4 mm allen wrench (M).
Note: Orientation of "UP" arrow is critical.
1
MAIN TUBES
C
A
DETAIL 1
fig 1
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06
3 of 6
Download from Www.Somanuals.com. All Manuals Search And Download.
AttachingAdapterPlatetoScreenwithVESA100MountingPattern
WARNING
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to screen or product may fail.
Choose hole pattern as shown in figure 2.1. Attach
adapter plate (B) to back of screen using four M4 x
10 mm screws (I).
2
Note: Orientation of "UP" arrow is critical.
Skip to step 3 on page 6.
B
I
fig 2.1
AttachingAdapterPlatetoScreenwithVESA200MountingPattern
WARNING
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to screen or product may fail.
Choose hole pattern as shown in figure 2.2. Attach
adapter plate (B) to back of screen using four M4 x
10 mm screws (I) as shown.
2
Note: Orientation of "UP" arrow is critical.
*Note: If screw (I) gets less than three threads of
engagement, attach adapter plate (B) to back of
screen using four M4 x 20 mm screws (J) and four
spacers (K) as indicated below.
Skip to step 3 on page 6.
B
I
*For screens with a
hole pattern in a
pocket, spacers (K) go
between adapter plate
(B) and screen.
K
fig 2.2
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06
4 of 6
Download from Www.Somanuals.com. All Manuals Search And Download.
AttachingAdapterPlatetoScreenwithVESA200x200MountingPattern
WARNING
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
Choose hole pattern as shown in figure 2.3. Attach
adapter plate (B) to back of screen using four M6 x
12 mm screws (F) as shown.
2
Note: Orientation of "UP" arrow is critical.
*Note: If screw (F) gets less than three threads of
engagement, attach adapter plate (B) to back of
screen using four M6 x 20 mm screws (G). If screw
(G) still gets less than three threads of engagement,
use four M6 x 30 mm screws (H).
B
Skip to step 3 on page 6.
F
fig 2.3
AttachingAdapterPlatetoPLPModelAdapterBracket
For screen compatibility please refer to the plasma interface list on our website www.peerlessmounts.com or call
customer care for a screen specific adapter bracket (PLP models).
Note: Refer to PLP model adapter bracket instruction
sheet for attachment of adapter bracket to screen.
Choose hole pattern as shown in figure 4.4. Attach
adapter plate (D) to back of screen using four M10 x
15 mm screws (E) as shown. Tighten screws using 6
4
mm allen wrench (L).
Note: Orientation of "UP" arrow is critical.
GENERICADAPTER
BRACKET
D
E
fig 4.4
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06
5 of 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Hook adapter plate (B) onto carriage (A) and secure using two M6 x 20 mm serrated washer head socket pin screws
(D) as shown in figure 3 and detail 2. Tighten screws using 4 mm security allen wrench (M).
3
B
A
D
DETAIL 2
fig 3
To install second screen, repeat steps four and five for back side of carriage (A).
4
ISSUED: 02-14-06 SHEET #: 202-9111-2 06-16-06
6 of 6
©2006PeerlessIndustries,Inc.Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|