Philips Home Cinema Projector
Garbo
English User guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
<
5. O peration
17-26
Preparation 17
General 17
Messages 17
General explanation 17
Feedback messages 17
Some examples 17
On Screen Display Menu 18-26
Menu tree 18-19
General explanation 20
Video/S-Video adjustments 21
Picture adjustments 21
Display adjustments 21
Computer adjustments 22-25
Picture adjustments 22
Display adjustments 22
Some examples 23
Picture Format 23
Vertical Shift 23
Digital Zoom/Magnification 24
Auto image 24
Horizontal size 24
Shift 25
General adjustments 26
Audio adjustments 26
General settings 26
6. Maintenance
27-29
Cleaning 27
Cleaning the cabinet 27
Cleaning the lens 27
Cleaning the dust filter 27
Lamp 28
Lamp replacement 28-29
Resetting the lamplife time 29
7.Troubleshooting
30-33
Philips Home Cinema Projector
English User guide Garbo
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
<
Congratulations on your purchase of one of the most sophisticated and reliable products on the
market today.We are sure that, used properly, it will bring you years of enjoyment.You will want
to keep this manual handy, as it is a convenient source of information about your projector.
For your own protection and prolonged operation of your projector, please read the enclosed
Safety Sheet.
Packaging contents
Please confirm that the following items are packed in the projector box.They are provided to
help you use or set up your projector.
LASER
LEFT
MOUSE
RIGHT
VOLUME
MENU
OK
AV
MUTE
STAND BY
SOURCE D-FREEZE D-ZOOM
Projector
Remote control + batteries Audio/Video RCA Cable
Lens cap - 3122 434 21540
2 x AAA Zinc Carbon, 1.5 V
4822 320 12281
3139 228 60500
VGA Cable
S-Video cable
Mains Lead
3122 438 75110
3122 438 75140
Europe: 4822 321 11399
USA: 4822 321 11294
UK: 4822 321 11431
Printed User Guide
Cd-rom (with Projection Assistant, Quick set up Card and
3103 435 90030
Warranty card, User Guide,
Data sheet and more.)
3103 438 70060
Safety Sheet
3103 435 9000
Scart/RCA Audio Video
adapter (not for USA version)
2422 033 00345
Scart/RCA component
Video adapter (not for USA version)
3122 438 71170
O ptional accessories
•
•
•
•
•
LCA 1120/00 - Soft bag - 8670 911 20009
LCA 3116/00 - 132 W replacement lamp - 8670 931 16009
LCA 2211/00 - Ceiling mount - 8670 922 11009
LCA 5310/00 - Monitor Y-cable - 8670 953 10009
LCA 5300/00 - VGA extension cable (15 m) - 8670 953 00009
Note
For further information on parts and accessories, please contact the dealer from which you purchased
your Philips projector.
Philips Home Cinema Projector
English User guide Garbo
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Functional overview
Controls >
1
3
2
4 5
AV
Source
Menu
O
K
Mut
e
Lam
Te m
p
p
Stand
by
6 7 8 9
0
@
!
A(udio)/V(ideo) Mute 1
To mute the sound of the projector and to mute the picture.
Source 2
To select the current projection source (Computer, Component, S-Video or Video).
The button toggles between the four signals.
– / + 3
Menu 4
O K 5
To adjust the volume.
To activate and deactivate the menu.
To confirm actions in the menu when the menu is on screen.
Standby/
Standby indicator 6
To switch the projector in or out of the Power/Standby mode.
The Standby indicator (text on button/ring around button):
–
–
–
–
lights up orange when the projector is warming up;
lights up red when the projector is in Power/Standby mode;
lights up green as when the projector is operating;
slowly blinks orange when the projector is cooling down.
Tem perature indicator 7
–
–
Lights up red in case of temperature error.
Flashes in case of fan error.
Lam p indicator 8
–
–
–
–
Lights up green when the lamp is on.
Lights up orange when lamp life has almost expired.
Lights up red when lamp life has expired.
Fast blinks red when lamp start has failed.
IR sensor 9
To receive the signals from the remote control.
Cursor Control 0
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
Focus ring !
To adjust the focus of the projected image.
To adjust the size of the projected image.
Zoom ring @
Philips Home Cinema Projector
English User guide Garbo
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Functional overview
Controls <
$
#
^
&
%
Height/Level adjuster #
Dust filter $
To adjust the vertical angle of the projector.
Mains inlet socket %
Lock slit ^
To connect the projector to the mains.
To insert an optional locking device (Kensington lock).
Lam p com partm ent &
Philips Home Cinema Projector
English User guide Garbo
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Functional overview
Remote control <
Stand by
On
1
Left
Mouse
MOUSE
Right
2
Volume
VOLUME
3
4
Menu
ENU
OK
!
0
Mute
MUTE
AV Mute
AV MUTE
5
9
8
Source
D-Freeze
D-Zoom
OOM
SOURCE D-FREEZE
6
7
AV MUTE
Stand by O n 1
To switch the projector in or out of the Power/Standby mode.
Mouse Left/Right 2
Function as the Left and Right mouse keys of your PC when USB or PS/2 connection has been
made.
– Volum e + 3
Menu 4
To adjust the volume.
To activate and de-activating the menu.
To mute the sound of the projector.
Mute 5
Source 6
To select the current projection source (Computer, Component, S-Video or Video).
The button toggles between the four signals.
D(igital)-Freeze 7
To capture a (moving) picture.The button toggles between the Freeze mode and the display
situation.
D(igital)-Zoom 8
To switch the ‘Digital Zoom’ function ‘On’ or ‘Off’ (toggle button). In ‘On’ condition, the zoom
centre can be selected using Cursor Control and the image is magnified with the zoom factor
chosen under ‘Magnification’.
A(udio)/V(ideo) Mute 9
To mute the sound of the projector and to mute the picture.
Cursor Control 0
To manipulate the mouse cursor on the connected computer as long as the menu is not active.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
The Cursor Control can only function as a mouse cursor when projector and computer are connected
via the USB or PS/2 connectors.Windows 98,Windows ME,Windows 2000 or Windows XP should be
installed on the computer when you make the USB connection.
Note
O K !
To confirm actions in the menu when the menu is on screen.
Philips Home Cinema Projector
English User guide Garbo
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Functional overview
Connections <
1
3 4 5 6 7 8
2
S-Video
Data
Audio in Data USB
PS/2
Pr
Y
R
G
B
Video
Audio
Audio
L
Pb
R
Video source connections
Input sockets to connect to DVD- and HDTV-video equipment
Com ponent in 1
These sockets can be connected to the following output sockets: RGB-Y, YCbCr, YPbPr
(480p, 720p, 1080 i).
Video 2
Input socket to connect to the Video out socket of a video recorder, Laser Disc player, video
camera, DVD player, or TV with AV output socket.
This socket can be connected to CVBS output sockets.
Audio L/R 3
Input sockets to connect to the Audio out sockets of a video recorder, laser disc player, video
camera or TV with A/V output socket.
S-Video 4
Input socket to connect to the S-Video out socket of a S-VHS video recorder, a VCR,
Laser Disc player, DVD player, video camera or TV with AV output socket.
This socket can be connected to a S-Video/S-VHS (Y/C) output socket.
Data source connections
Com puter 5
Audio in Com puter 6
USB (upstream) 7
Input socket to connect to the Data out terminal of a computer.
Input socket to connect to the Audio out terminal of a computer.
In-/Output socket to connect a PC or Apple Macintosh computer equipped with a USB
downlink connection.When USB connection is used the mouse cursor on the connected
computer can be controlled via the projector remote control. Make sure Windows 98,
Windows ME, Windows 2000 or Windows XP is installed on the computer.
PS/2 8
In-/Output socket to connect a PC or Apple Macintosh computer equipped with a PS/2
connection.When PS/2 connection is used the mouse cursor on the connected computer can
be controlled via the projector remote control.
Philips Home Cinema Projector
English User guide Garbo
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Set up
>
SCREEN
Positioning the projector
and screen
SCREEN
Front projection
Ceiling front projection
Ceiling rear projection
SCREEN
SCREEN
Rear projection
•
•
Place the projector on a stable, level surface, out of direct sunlight and away from sources of
excessive dust, dirt, heat, water, moisture, vibration and strong magnetic fields.
Allow sufficient cooling of the product by keeping all air inlets and outlets clear from
obstructions.
•
•
•
•
Position the projector in such way that the viewers cannot watch into the projector light beam.
Choose a screen size suitable for the number of viewers and the size of the room.
Picture quality is best when you sit directly in front of the projector screen.
The projector can be used for both front projection, rear projection and ceiling projection
applications. As default factory setting, the projector has been set up for front projection.You
can change to rear or ceiling projection via the ‘Mirror’ function in the ‘Picture’ menu.
Switching on the projector
1
–
2
3
–
Insert the mains lead into the projectors Mains inlet socket and connect it to the wall socket.
The Standby indicator lights up red, the projector is now in the Power/Standby mode.
Remove the lens cap.
Press any button on projector or remote control to switch on the projector.
The Standby indicator lights up orange.
AV
Mute
Source
Menu
O K
Lam p
Te m p
Stand
by
–
When the projection lamp is on, the Standby indicator lights up green and the start-up
screen appears for several seconds.
PHILIPS
Home Cinema Projectors
4
–
•
5
–
Press the Standby button to switch the projector back into the Power/Standby mode.
The Standby Warning screen will appear for 20 seconds.
The Standby Warning screen can be removed by pressing the OK button.
Press the Standby button again to confirm.
Warningꢀ
ꢀ
ꢀ
ꢀ
ꢀ
If the projector is switched off you have to waitꢀ
1 minute before you can switch on the projector ꢀ
The projector will now go into Power/Standby mode.
again.ꢀ
ꢀ
ꢀ
ꢀ
You can also press the Standby button twice in succession to switch the projector into Power/Standby
mode immediately.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Press stand-by key again to confirm.ꢀ
Press OK key to remove this warning.
6
To switch off the mains supply completely, disconnect the mains lead.
Notes
Save energy! Please put the projector in the Power/Standby position if you are not going to use the
projector for more than 15 minutes.
When no signal inputs are detected for 30 minutes, the projector automatically switches to Power/
Standby (Auto Standby).This setting can be changed in the ‘Settings’ menu
Before disconnecting the mains lead, make sure that the cooling fan has stopped (about 3 minutes
after the projector has been switched to Power/Standby).
Philips Home Cinema Projector
English User guide Garbo
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Set up
>
Adjusting the focus and
size of the im age
•
•
Use the Zoom ring to adjust the size of the image.
Use the Focus ring to adjust the focus of the image.
Zoom ring
Focus ring
Adjusting the vertical angle
of the projector
To raise:
•
Keep knob A pressed and lift to raise the projector.
The Height/Level Adjuster B will come out.
–
To Lower:
•
•
Keep knob A pressed and gently lower the projector.
Use the Focus Ring and Zoom Ring to readjust the focus and size of the image.
A
B
Keystone correction
If projector and screen are not properly placed, the picture will be distorted, producing a
keystoned image (picture top width larger than picture bottom width or vice versa).When a
keystoned image occurs the image ratio (4:3, 16:9) will still be guaranteed.This is especially
important when the projector is being used together with an ‘intelligent whiteboard’.
‘Keystone correction’ allows you to correct picture distortion of the vertical keystone type by
internal scaling.This correction function is accessible through the ‘Keystone Correction’ option in
the ‘Settings’ menu of the On Screen Display (OSD) menu.
Moving/transporting the
projector
Preparation
1
–
2
Press the Standby button twice to put the projector in Power/Standby.
The Standby indicator starts blinking orange.
Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
3
Put the lens cap back in place to prevent dust, dirt or other contamination from harming or
damaging the front of the projector lens when moving the projector.
Note
Never place the projector on the side where the connections are located.
Moving/transporting the projector
The projector contains many glass and precision parts. If you need to transport the projector,
please follow these packing instructions to pervent accidental damage to the projector.
•
When you are hand-carrying the projector, be sure to use a carrying case like the optional
softbag.
•
When shipping the projector, use the original packaging material if possible. If you do not
have the original packaging, use equivalent materials, placing plenty of cushioning around the
projector.
•
When transporting the projector as freight or checked luggage, first put it in a carrying case,
then pack it in a firm box, using cushioning around the case.
Inserting the batteries in
the rem ote control
1
2
3
Push and slide the lid in the direction of the arrow.
Install two ‘AAA’ batteries as indicated inside the battery compartment.
Replace the lid and snap it into place.
Note
The maximum range of the remote control is approximately 15 m (± 50 feet).
Philips Home Cinema Projector
English User guide Garbo
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
General information <
General inform ation
Video input
The projector accepts the input signal of all major video formats, including NTSC 3.58, 4.43,
PAL B, G, D, H, I, N, M and SECAM signals.The projector will recognize these standards and
adapt to them automatically.With the ‘Picture Format’ feature you can select one of six picture
format options: wide screen, super zoom 4:3, 4:3, movie expand 14:9, movie expand 16:9,
16:9 subtitles.
Computer input
The computer input is suitable for both Apple Macintosh computers (Power Book and Power
Mac) as well as for IBM compatible PCs.The projector is Microsoft (R),Windows (R)
95/98/ME/2000/XP compatible and accepts input signals from all computers that meet following
specifications:
•
•
•
•
•
Multi scan VGA-SXGA
Horizontal scan rate: 15-108 kHz
Vertical refresh rate: 50-120 Hz
Bandwith: 140 MHz
Display Data Channel DDC: 1/2B
The data output of IBM compatible PCs can be connected directly to the projector using
standard data cables.When connecting the projector to a Macintosh computer equipped with a
2 row, 15 pin connector a VGA/MAC adaptor (available at your PC store) is required. If your
computer is equipped with a 3 row connector no adaptor is needed.
Universal Serial Bus (USB)
The Universal Serial Bus (USB) connector allows you to connect to computers equipped with a USB
interface, resulting in real hot plug and play presentation.
Mouse control:
By connecting USB, the mouse function on the Remote Control automatically gets installed.
You can now manipulate the mouse cursor on the computer and on the screen, using Cursor Control
on the remote control.The Mouse Left/Right keys on the remote control function as Left and Right
mouse keys of your pc.
Drag and drop facility
Drag and drop via the remote control works slightly different than via the pc mouse. Here’ how:
•
•
Use Cursor Control to select the item to be moved.
Press and keep pressed Mouse Left.
•
–
•
Use Cursor Control to move the selected item.Then release Mouse Left.
The item will now be moved.
Press Mouse Left when the item reaches the required location.
The item will now be dropped.
–
Note
Note
Mouse control and ‘drag and drop’ is also possible when PS/2 connection has been made.
Based on the specific hardware and software configuration available, Apple Macintosh computer users
could experience incomplete or erratic USB -functionality.These problems are not related to the
performance of your projector.
External monitor connection
A separate external monitor (or a second projector) can be connected to the projector.
The image projected is simultaneously shown on the monitor, even when the projector is in
Power/Standby or Off mode.
CAUTIO N
Always switch off projector and external equipment before making any connections.
Philips Home Cinema Projector
English User guide Garbo
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
Connecting to video equipment >
CVBS only
CVBS only
S-Video
Pr
S-Video
Audio in Computer
USB
PS/2
Computer
R
Video Pr
R
G
B
Video
Audio
Audio
Y
G
Audio YL
AudioPRb
L
Pb
B
R
1b
1a
2
S-VHS only
VCR
L Audio
out
R
S-Video
out
Video
out
CVBS only
CVBS only
CVBS
S-VHS
1
2
Connect the Video (out) socket of a VCR, Laser Disc player, video camera or TV to the
Video (in) socket of the projector.
For this, use the video/audio connection cable (1a) supplied.
Connect the Audio out L/R sockets of the VCR, Laser Disc player, video camera or TV to
the Audio (in) L/R sockets of the projector.
For this, use the audio/video connection cable supplied (1b).
1
2
Connect the S-Video (out) socket of a S-VHS video recorder, Laser Disc player, video
camera or TV to the S-Video (in) socket of the projector.
For this, use optional S-Video connection cable supplied (2).
Connect the Audio out L/R sockets of the S-VHS video recorder, Laser Disc player, video
camera or TV to the Audio (in) L/R sockets of the projector.
For this, use audio/video connection cable supplied (1b).
Scart connection
CVBS
1
Connect the Scart/RCA Audio Video adapter supplied to the Scart connector of the VCR,
Laser Disc player, video camera or TV.
2
Plug the video/audio connection cable supplied into both the adapter and the Video and
Audio (in) L/R sockets of the projector.
Scart adapter
(not for USA version)
S-VHS
Plug the S-Video connection cable supplied into the VCR and the S-Video socket of the
projector.
3
S-Video
Scart adapter
(not for USA version)
Philips Home Cinema Projector
English User guide Garbo
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
Connecting to video equipment >
S-V
Audio in Computer
USB
PS/2
Computer
Pr
R
deo
dio
Pb
R
1
2
Com ponent/HDTV
equipm ent
DVD player, Settop Box,
HDTV receiver, etc.
Cr
Pr
R
Y
Y
G
Cb
Pb
B
Audio
out
R
L
Com ponent/HDTV
Pr,Y, Pb/Cr,Y, Cb
1
2
–
Connect the Component in sockets of the projector to the appropriate output sockets of
your Component- or HDTV-video equipment (Pr,Y, Pb / Cr,Y, Cb).
For this, use the audio/video connection cable supplied (1).
If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (2).
Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
Philips Home Cinema Projector
English User guide Garbo
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
Connecting to video equipment <
S-
Audio in Computer
USB
PS/2
Computer
Pr
deo
dio
Pb
R
3
2
1
Com ponent/HDTV
equipm ent
4
DVD player,
Settop Box, etc.
Audio
out
R
L
Scart connection
RGBS
1
Connect the Scart/RCA Component Video adapter (1) to the Scart connector of your
Component- or HDTV-video equipment
2
Connect the Component in sockets of the projector to the R, G and B outputs of the
adapter.
For this, use the audio/video connection cable supplied (2).
Connect the Video input of the projector to the Y output of the adapter.
For this, use an optional audio/video connection cable (3).
Select ‘Component’ input by pressing the Source button.
‘Component’ appears on the screen.
3
4
–
Componentꢀ
ꢀ
ꢀ
5
If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (4).
–
Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
Philips Home Cinema Projector
English User guide Garbo
14
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
Connecting to a computer >
Projector
Projector
PROJECTOR
S-Video
Data Au
C
A
o
u
mdip
o
uitnerD
Pr
Y
R
G
B
Vid
Au
AuPRb
5a
B
Audio
Pb
M
M
o
o
n
n
i
i
t
t
or
or
5c
6
4
2
3
For external monitor
connection only
Com puter
O R
C O M P U T
5b
1
Mac/PC
Philips VGA/MAC adapter
PS/2
Data out
USB
Audio out
PC/Macintosh
1
Connect the Data (out) socket of the computer to the Computer (in) socket of the
projector and secure the plugs by tightening the thumb screws.
For this, use the VGA cable supplied (1).
2
Connect the USB (upstream) socket of the projector to the USB downstream port of the
computer.
For this, use an optional USB cable (2).
or:
2
Connect the PS/2 (out) socket of the projector to the PS/2 (in) socket of the computer.
For this, use an optional PS/2 cable (3).
•
When switching on, first switch on the projector and then the PC.
–
You can now manipulate the mouse cursor on the computer and on the screen, using
Cursor Control on the remote control.When using the USB connection, make sure
Windows 98,Windows ME,Windows 2000 or Windows XP is installed on the computer.
The display settings of the computer will be changed to fit the capability of the projector.
–
3
If required you can connect the Audio out socket of the computer to the Audio in
Computer socket of the projector.
For this use an optional audio cable (4).
–
Audio information from the Computer will then be played via the projector speaker.
Philips Home Cinema Projector
English User guide Garbo
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
Connecting to a computer <
Connecting to an external monitor
1
Connect the VGA Y connector marked ‘Projector’ (5a), of an optional VGA Y-cable, to the
Computer (in) socket of your projector.
Connect the VGA cable supplied (1) between the computer and the VGA Y connector
marked ‘Computer’ (5b).
AV
Source
Menu
O K
Mute
Lam p
Te m p
Stand
by
2
3
4
5
6
–
Connect the VGA Y connector marked ‘Monitor’ (5c) to the VGA cable (6) of the monitor.
Switch on your Computer.
Switch on the projector.
Select ‘Computer’ input, using the Source button.
‘Computer’ appears on the screen.
Computerꢀ
ꢀ
ꢀ
7
–
8
Press Menu.
The menu bar appears on the screen.
Use Cursor Control to select ‘Settings’ in the menu bar.
Settings
Pictureꢀ
ꢀ
Languageꢀ
Display
Audio
ꢀ
ꢀ
Keystone correctionꢀ
Monitor outꢀ
System information...ꢀ
Factory resetꢀ
Key lockꢀ
(more)
9
Use Cursor Control to select ‘Monitor out’.
Pictureꢀ
ꢀ
Languageꢀ
Kestone correctionꢀ
Monitor outꢀ
System information...ꢀ
Factory resetꢀ
Key lockꢀ
Display
Audio
Settings
10 Use Cursor Control to select ‘On’.
The projector will indicate the necessity to connect the Y-cable.
11 Switch on the external monitor.
The image projected is simultaneously shown on the monitor.
–
–
(more)ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Off
On
Monitor out is to be activated if an extra monitorꢀ
is connected to the projector. Otherwise it should ꢀ
be de-activated and no special Y-cable should be ꢀ
connected.
Philips Home Cinema Projector
English User guide Garbo
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
Preparation <
General
1
Press the Standby button to switch on the projector.
AV
Mute
Source
Menu
O K
Lam p
Te m p
Stand
by
–
–
The Standby indicator lights up orange.
When the projection lamp is on, the Standby indicator lights up green and the start-up
screen (when enabled) appears for several seconds.
PHILIPS
Home Cinema Projectors
2
Select the required source (Computer, Component, S-Video or Video) by pressing the
Source button.
Note
When only one input source is connected, this source will automatically be selected (Auto Source).
When more input sources are connected, the source with the highest priority will be selected
(Computer, Component input, S-Video,Video). Source selection can be changed in the ‘Settings’ menu.
3
Switch on the computer or start video playback.
–
A feedback message appears on the screen, indicating the selected source.
Messages
General explanation
Messages are displayed in the centre of the screen.The problem is described in the header of
the message display. Suggestion(s) to solve the problem are displayed in the gray part of the
message display.
Fan errorꢀ
ꢀ
The projector will switch off automatically.ꢀ
ꢀ
These messages cannot be suppressed.
Please:ꢀ
1. Check whether the filter door is properly closedꢀ
ꢀ
If the problem persists in spite of the above, pleaseꢀ
contact a service centre for repair.
Feedback messages
Feedback messages are displayed in the top right corner of the screen.They are displayed when:
–
–
–
–
a signal comes up or goes down;
when an input source is changed;
when Mute or A/V Mute is activated;
when the Auto image function is set to On.
Some examples
These messages will only be displayed when the menu option ‘Feedback’ is set to ‘On’ in the
‘Settings’ menu. All messages will be removed automatically after 4 seconds.
Componentꢀ
Videoꢀ
ꢀ
No signal
S-Videoꢀ
ꢀ
A/V Muted
Computerꢀ
ꢀ
ꢀ
ꢀ
A/V Muted
Computer selected as source
Video selected as source,
no input signal
S-Video selected as source,
A/V muted
Component selected as
source A/V muted
Philips Home Cinema Projector
English User guide Garbo
17
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu >
Menu tree
All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays
and with help of Menu, OK and Cursor Control on the projector or the remote control.
The projector is set to standard specifications at the factory. However, you can adjust these
specifications to suit your own preferences.The projector menu screens allow you to adjust the
various projector settings (for both Computer and Video). For explanation and operation see
next pages.
AV
Mute
Source
Menu
O K
Lam p
Te m p
Stand
by
VIDEO /S-VIDEO MO DE
Main m enu
Picture
Sub m enu
Setting
max
Brightness
Contrast
min
min
min
min
sharp
max
max
max
soft
Hue (NTSC only)
Saturation
Pictureꢀ
Display
Audio
Settings
ꢀ
Brightnessꢀ
Contrastꢀ
Sharpness
Hueꢀ
Saturationꢀ
Mirror
ꢀ
Sharpnessꢀ
Mirrorꢀ
Picture Format
wide screen
(more)ꢀ
ꢀ
super zoom 4:3
ꢀ
4:3
minꢀ
ꢀ
ꢀ
max
movie expand 14:9
movie expand 16:9
16:9 subtitles
Move pointer left or right to adjust the contrast level.
ꢀ
Colour tracking
Colour temperature
vivid
natural
cool
max
max
max
On
warm
min
min
min
Off
Red
Green
Blue
Display
Digital Freeze
Digital Zoom
Off
On
Pictureꢀ
Display
Audio
Settings
ꢀ
Magnification
min
max
(previous)ꢀ
Picture formatꢀ
Colour trackingꢀ
Colour temperatureꢀ
CO MPUTER MO DE
Main m enu
Picture
;
;
;
Redꢀ
Greenꢀ
Blueꢀ
Sub m enu
Setting
Brightness
Contrast
Mirror
min
min
max
max
ꢀ
ꢀ
minꢀ
max
ꢀ
ꢀ
Move pointer left or right to adjust the Red level.
Picture Format
wide screen
ꢀ
super zoom 4:3
4:3
movie expand 14:9
movie expand 16:9
16:9 subtitles
Colour tracking
Colour temperature
vivid
natural
cool
max
max
max
On
On
max
On
warm
min
min
min
Off
Off
min
Off
min
min
Pictureꢀ
Display
Audio
Settings
ꢀ
Red
Green
Blue
Digital Freezeꢀ
Digital Zoomꢀ
;
Magnificationꢀ
Auto Imageꢀ
ꢀ
;
;
;
ꢀ
ꢀ
ꢀ
ꢀ
Horizontal sizeꢀ
Phaseꢀ
Display
Digital Freeze
Digital Zoom
Shift . . .ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Magnification
Auto Image
Shift is used to adjust the position of the image.ꢀ
Press OK key to activate Shift.ꢀ
ꢀ
Horizontal Size
Phase
max
max
Shift
Cursor controlled Shift
Philips Home Cinema Projector
English User guide Garbo
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu >
Menu tree
GENERAL ADJUSTMENTS/SETTINGS
Main m enu
Audio
Sub m enu
Volume
Bass
Treble
Mute
Setting
Min
Min
Min
Off
Max
Max
Max
On
Settings
Pictureꢀ
ꢀ
Volumeꢀ
Display
Audio
ꢀ
Bassꢀ
Trebleꢀ
Mute
Settings
Language
Eng.
Esp.
Deu.
Fra.
Por.
Ita.
Chi.
Keystone correction
Monitor out
System information
Factory reset
Key lock
Off
OK
OK
On
Settings
Pictureꢀ
ꢀ
Languageꢀ
Display
Audio
OK (3 sec.)
ꢀ
Start-up screen
Lamp counter
Auto Standby
Auto Source
Feedback
Off
On
ꢀ
Keystone correctionꢀ
Monitor outꢀ
System information...ꢀ
Factory resetꢀ
Key lockꢀ
OK (3 sec.)
Off 15 30 45 60 120
Off
Off
(more)
On
On
Settings
Pictureꢀ
ꢀ
(previous)ꢀ
Display
Audio
ꢀ
ꢀ
Start-up screenꢀ
Lamp counterꢀ
Auto Standbyꢀ
Auto Sourceꢀ
Feedback
Off
On
The Start-up screen can be shown or suppressedꢀ
during start-up.
Philips Home Cinema Projector
English User guide Garbo
19
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu <
General explanation
1
Press Menu.
AV
Mute
Source
Menu
O K
Lam p
Te m p
Stand
by
–
The menu bar appears on the screen.
The first item is highlighted and its sub menu is shown.
Pictureꢀ
ꢀ
Display
Audio
Settings
Brightnessꢀ
Contrastꢀ
Hueꢀ
Saturationꢀ
Sharpnessꢀ
Mirrorꢀ
(more)ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Depending on the selected source (Computer, Component,Video or S-Video) some
options of the submenu may be greyed out.This indicates that these functions:
– are not available in a certain mode,
Pictureꢀ
ꢀ
Brightnessꢀ
Contrastꢀ
Display
Audio
Settings
Hueꢀ
Saturationꢀ
– have no function for the selected source.
Sharpnessꢀ
Mirrorꢀ
For example:
(more)ꢀ
ꢀ
ꢀ
– Horizontal size under menu ‘Display’ when Auto image is switched to ON.
– Hue under menu ‘Picture’ when signaltype is not NTSC.
minꢀ
max
ꢀ
ꢀ
Move pointer left or right to adjust the contrast level.
ꢀ
2
3
Use Cursor Control left and/or right to move the cursor to any other item in the menu bar.
Select the sub menu item to be adjusted using Cursor Control up and/or down.When
more items are available than can be shown in one screen, this will be indicated by ‘more’ at
the bottom of the list. Move the cursor down to go to the next list of items.With ‘previous’
you can go back to the first list.
Adjust the selected item in the action window at the bottom of the screen, using Cursor
Control left and/or right.
Select the next item to be adjusted in the sub menu and adjust as described above.
Press Menu to close the On Screen Menu Display.
Pictureꢀ
ꢀ
(previous)ꢀ
Picture formatꢀ
Colour trackingꢀ
Colour temperatureꢀ
Display
Audio
Settings
;
;
;
Redꢀ
Greenꢀ
Blueꢀ
4
ꢀ
ꢀ
minꢀ
max
5
6
ꢀ
ꢀ
Move pointer left or right to adjust the Red level.
ꢀ
Philips Home Cinema Projector
English User guide Garbo
20
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu >
Video/S-Video adjustm ents
For Video/S-Video signal input, the following ‘Picture’ and ‘Display’ adjustments can be made:
AV
Mute
Source
Menu
O K
Picture adjustments
Lam p
Te m p
Stand
by
•
Press Menu and select ‘Picture’ in the menu bar. The following ‘Picture’ adjustments can now
be made according to the instructions under ‘General explanation’.
For adjustment of ‘Picture Format’, see explanation under ‘Computer adjustments’.
– Brightness
Pictureꢀ
Display
Audio
Settings
ꢀ
adjusts brightness of the displayed picture;
– Contrast
Brightnessꢀ
Contrastꢀ
Hueꢀ
adjusts the overall contrast intensity;
– Hue (only for NTSC)
adjusts the tint of the projected image;
– Saturation
adjusts the colour saturation of the projected image;
– Sharpness
Saturationꢀ
Sharpnessꢀ
Mirrorꢀ
(more)ꢀ
ꢀ
ꢀ
minꢀ
max
ꢀ
ꢀ
Move pointer left or right to adjust the contrast level.
ꢀ
controls the contour impression of the picture;
– Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
Pictureꢀ
ꢀ
Display
Audio
Settings
– Picture Format
selects one of six picture format options (wide screen, super zoom 4:3, 4:3, movie expand
14:9, movie expand 16:9, 16:9 subtitles);
– Colour tracking
selects between ‘Vivid’ and ‘Natural’ representation of colours in the picture.
‘Vivid’ is automatically set when computer input is used;
‘Natural’ is automatically set when video input is used.
– Colour Temperature
(previous)ꢀ
Picture formatꢀ
Colour trackingꢀ
Colour temperatureꢀ
;
;
;
Redꢀ
Greenꢀ
Blueꢀ
ꢀ
ꢀ
minꢀ
max
ꢀ
ꢀ
Move pointer left or right to adjust the Red level.
ꢀ
adjusts the overall colour impression from warm to cool.
The various colours (red, green and blue) can also be adjusted individually.
Display adjustments
•
Press Menu and select ‘Display’ in the menu bar. The following ‘Display’ adjustments can now
be made according to the instructions under ‘General explanation’.
For adjustment of ‘Digital Zoom/Magnification’, see explanation under ‘Computer
adjustments’.
– Digital Freeze
captures a moving picture (still picture);
– Digital Zoom
enlarges a part of the picture;
– Magnification
Pictureꢀ
ꢀ
Digital Freezeꢀ
Digital Zoomꢀ
Display
Audio
Settings
ꢀ
;
Magnificationꢀ
Auto Imageꢀ
ꢀ
;
;
;
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Horizontal sizeꢀ
Phaseꢀ
Shift . . .ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
adjusts the zoom factor.
Philips Home Cinema Projector
English User guide Garbo
21
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu >
Com puter adjustm ents
For computer signal input, the following ‘Picture’ and ‘Display’ adjustments can be made.
Picture adjustments
•
Press Menu and select ‘Picture’ in the menu bar. The following ‘Picture’ adjustments can now
be made according to the instructions under ‘General explanation’:
– Brightness
Pictureꢀ
Display
Audio
Settings
ꢀ
Brightnessꢀ
Contrastꢀ
Hueꢀ
Saturationꢀ
Sharpnessꢀ
Mirrorꢀ
(more)ꢀ
ꢀ
ꢀ
adjusts brightness of the displayed picture;
– Contrast
adjusts the overall contrast intensity;
– Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
– Picture Format
minꢀ
max
ꢀ
ꢀ
Move pointer left or right to adjust the contrast level.
ꢀ
selects one of six picture format options (wide screen, super zoom 4:3, 4:3, movie expand
14:9, movie expand 16:9, 16:9 subtitles);
– Colour tracking
selects between ‘Vivid’ and ‘Natural’ representation of colours in the picture.
‘Vivid’ is automatically set when computer input is used;
‘Natural’ is automatically set when video input is used.
– Colour Temperature
Pictureꢀ
ꢀ
(previous)ꢀ
Picture formatꢀ
Colour trackingꢀ
Colour temperatureꢀ
Display
Audio
Settings
;
Redꢀ
;
;
ꢀ
ꢀ
Greenꢀ
Blueꢀ
adjusts the overall colour impression from warm to cool.
The various colours (red, green and blue) can also be adjusted individually
minꢀ
max
ꢀ
ꢀ
Move pointer left or right to adjust the Red level.
ꢀ
Display adjustments
•
Press Menu and select ‘Display’ in the menu bar.The following ‘Display’ adjustments can now
be made according to the instructions under ‘General explanation’:
AV
Mute
Source
Menu
O K
Lam p
Te m p
– Digital Freeze
Stand
by
captures a moving picture (still picture);
– Digital Zoom
enlarges a part of the picture;
– Magnification
Tip for Windows users
adjusts the zoom factor;
To adjust size and phase correctly
1 Select ‘Start’ and then ‘Shut down’
from the Windows Taskbar.
2 Adjust the projectors size
control, so that no vertical
bars are visible.
– Auto image
automatically sizes and positions the image to fit optimally in the screen picture;
– Horizontal size
adjusts the computer image in a horizontal direction to make the image completely fill the
screen;
– Phase
3 Now adjust the projectors phase
control for maximum brightness
of the projected image.
minimises picture imperfections.When connecting the projector to your PC for the first
time, be sure to adjust the phase control for optimal readability of the projected text;
– Shift
4 Press ‘No’ in the Windows
shutdown screen to cancel
the shutdown action.
adjusts the computer image in horizontal and vertical direction to centre it on the screen.
Philips Home Cinema Projector
English User guide Garbo
22
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu >
Some examples
The following ‘Display’ adjustment procedures, follow a slightly different sequence of actions, or
may need some further explanation.
Picture Format
‘Picture Format’ is used to select one of six picture format options (wide screen, super zoom
4:3, 4:3, movie expand 14:9, movie expand 16:9, 16:9 subtitles). Default mode for computer
signal input at each start up of the projector is 4:3. For video signal input the picture format will
be selected that was selected the last time the projector was switched on.
1
Press Menu.
AV
Mute
Source
Menu
O K
Lam p
Te m p
Stand
by
–
The menu bar will appear.
‘Picture’ is highlighted and its sub menu is shown.
Use Cursor Control to move the cursor to ‘Picture Format’.
Select the desired picture format.
Selected picture format is activated. See also ‘Vertical shift’.
If required, select the next item to be adjusted or press Menu to exit.
Pictureꢀ
ꢀ
(previous)ꢀ
Picture formatꢀ
Colour trackingꢀ
Colour temperatureꢀ
Display
Audio
Settings
2
3
–
4
;
;
;
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Redꢀ
Greenꢀ
Blueꢀ
Picture Format - Wide Screenꢀ
ꢀ
Picture Format is used to adjust theꢀ
width/height ratio of the image.
Vertical Shift
(after selecting picture format for video input signal)
Due to the scaling of the image when the picture format is changed, it might be possible that a
part of the actual image is missing at the top or the bottom of the screen.When one of the
picture formats ‘super zoom 4:3’,‘movie expand 14:9’,‘movie expand 16:9’,‘16:9 subtitles’ is
selected and confirmed by pressing OK, the Vertical Shift function is activated.This allows you to
correct the position of the projected image upwards or downwards. ,
1
2
3
Use Cursor Control to move the projected image upwards or downwards.
Press OK to confirm and store the adjustment.
If required, select the next item to be adjusted or press Menu to exit.
Shift...;;;;
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Move pointer to position the image.ꢀ
Press OK key when done.
ꢀ
Note
When the ‘Vertical shift’ window has been removed you can also the Cursor Control Up/Down buttons
on the projecor or the remote control to move the image upwards/downwards.
Philips Home Cinema Projector
English User guide Garbo
23
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu >
Digital Zoom/Magnification
‘Digital Zoom’ is used to enlarge a part of the picture.
AV
Source
Menu
O K
Mute
1
Press Menu.
Lam p
Te m p
Stand
by
–
2
3
4
The menu bar will appear.
Pictureꢀ
ꢀ
Digital Freezeꢀ
Digital Zoomꢀ
Audio
Settings
Display
Use Cursor Control to move the cursor to ‘Display’.
Use Cursor Control to move the cursor to ‘Digital Zoom’.
Select ‘On’ to switch ‘Digital Zoom’ on.
;
Magnificationꢀ
Auto Imageꢀ
;
;
;
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Horizontal sizeꢀ
Phaseꢀ
Shift...ꢀ
• Press OK to continue, or
• Press Menu to exit and continue with the previous Zoom settings.
Use the zoom target to select centre of the screen area you wish to enlarge.
• Press OK to confirm.
Use the Magnification slider to adjust the Zoom factor.
• Press OK to confirm and exit the menu.
5
6
7
ꢀ
off
on
Digital Zoom is used to enlarge part of the picture.
ꢀ
Use Cursor Control to select another section of the enlarged area (‘Panning’).
Note
By pressing the D(igital) Zoom button on the remote control you enter directly into the zoom centre
selection screen (step 4).When Digital Zoom is already active, pressing the D(igital) Zoom button will
show the Magnification slider; pressing the D(igital) Zoom button twice will turn off Digital Zoom.
Auto image
The Auto Image function automatically sizes and positions the image to fit optimally in the
screen picture. In addition it takes care for phase adjustment. It does not affect the selected
picture format.When Auto Image is set to On, the Horizontal size, Shift and Phase options are
greyed out.
Horizontal size
The Horizontal size function is used to size a computer image to make it fit the projected
picture.When the OSD menu is active and the horizontal size option is selected, the level will
be indicated graphically on a linear scale (slider).
Philips Home Cinema Projector
English User guide Garbo
24
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu >
Shift
The Shift function adjusts the computer image in horizontal and vertical direction to centre it on
the screen.This function is only active when ‘Auto image’ is set to ‘Off’.
AV
Source
Menu
O K
Mute
Lam p
Te m p
Stand
by
1
Press Menu.
–
2
3
4
The menu bar will appear.
Use Cursor Control to move the cursor to ‘Display’.
Use Cursor Control to move the cursor to ‘Shift’.
Press OK to activate Shift.
Pictureꢀ
ꢀ
Digital Freezeꢀ
Digital Zoomꢀ
Display
Audio
Settings
;
Magnificationꢀ
Auto Imageꢀ
ꢀ
;
;
;
ꢀ
ꢀ
ꢀ
ꢀ
Horizontal sizeꢀ
Phaseꢀ
Shift . . .ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Shift is used to adjust the position of the image.ꢀ
Press OK key to activate Shift.ꢀ
ꢀ
5
6
7
Use Cursor Control to position the computer image.
Press OK to confirm and store the adjustment.
If required, select the next item to be adjusted or press Menu to exit.
Shift;;;;
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Move pointer to position the image.ꢀ
Press OK key when done.
ꢀ
Philips Home Cinema Projector
English User guide Garbo
25
Download from Www.Somanuals.com. All Manuals Search And Download.
5. O peration
On Screen Display Menu <
General adjustm ents
Audio adjustments
•
Press Menu and select Audio in the menu bar. The following Audio adjustments can now be
AV
Mute
Source
Menu
O K
made for both Computer, Component and Video/S-video input, according to the
instructions under ‘General explanation’:
– Volume
Lam p
Te m p
Stand
by
adjusts the sound level;
– Bass
adjusts the bass tones;
– Treble
adjusts the high tones;
– Mute
Settings
Pictureꢀ
ꢀ
Volumeꢀ
Bassꢀ
Trebleꢀ
Mute
Display
Audio
ꢀ
mutes the sound of the projector.
The volume can also be adjusted with the – Volume + keys on the remote control and local keyboard.
General settings
The projector is equipped with the following functions to optimize its use and handling:
•
Press Menu and select Settings in the menu bar.The following settings/adjustments can now
be made for both Computer, Component and Video/S-video input, according to the
instructions under ‘General explanation’:
AV
Source
Menu
O K
Mute
Lam p
Te m p
Stand
by
– Language
To select the required menu language;
– Keystone correction
To correct picture distortion of the vertical keystone type by internal scaling;
– Monitor out
Enables image on second monitor connected;
– System information
The System Information sub menu contains an overview of the most relevant projector
settings, including information on the hardware and software configuration;
Settings
Pictureꢀ
ꢀ
Languageꢀ
Keystone correctionꢀ
Monitor outꢀ
System information...ꢀ
Factory resetꢀ
Key lockꢀ
Display
Audio
ꢀ
ꢀ
(more)
– Factory reset
To reset all user settings to the default factory settings;
– Key lock
To de-activate all remote and local controls.To disable the keylock function keep the OK
button pressed for 10 seconds;
– Start-up screen
To display or suppress the default Philips start-up screen upon the projector’s start up;
– Lamp counter
To show the operating time of the lamp, which can be reset after a new lamp has been
installed;
Settings
Pictureꢀ
ꢀ
(previous)ꢀ
Start-up screenꢀ
Lamp counterꢀ
Auto Standbyꢀ
Auto Sourceꢀ
Feedback
Display
Audio
ꢀ
ꢀ
– Auto Standby
To switch off Auto Standby mode or to select the delay time after which the projector
automatically switches to Standby;
– Auto Source
Off
On
To switch automatic source selection on or off;
– Feedback
The Start-up screen can be shown or suppressedꢀ
during start-up.
To suppress OSD messages.Warning or error messages however are never suppressed.
Philips Home Cinema Projector
English User guide Garbo
26
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Maintenance
>
Cleaning
Caution
Switch off and disconnect the projector before cleaning.
1
–
2
Press the Standby button twice to switch off the projector.
The Standby indicator starts blinking orange.
Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
AV
Source
Menu
O K
Mute
Lam p
Te m p
Stand
by
Cleaning the cabinet
•
•
•
When the cabinet is dusty, clean it by gently wiping with a soft cloth.
A chamois leather slightly moistened with water is sufficient for cleaning the housing.
Do not use cleaning agents as they may harm the housing.
Cleaning the lens
•
When the lens is dirty or dusty, first blow the dust off and then gently wipe with a soft
brush or lens cleaning paper. Never touch the lens with your fingers.
The lens is likely to become mouldy if left dirty.
–
Cleaning the dust filter
Important
Make sure to clean the dust filter regularly.
A
1
2
3
Switch off the projector and wait until the cooling fan has stopped before disconnecting the
projector.
Turn the projector over. Never place the projector on the side where the connections are
located!
Press tab A and remove filter holder B from the projector.
B
4
5
Press clamp C, open the holder and remove the filter.
While firmly holding the filter, gently remove any accumulated dust, from the dusty side, with
a vacuum cleaner.
6
7
Press clamp C, put the filter back in place and release clamp C. Firmly press the filter edges
in place.
Close the filter holder.
C
C
8
Press tab A and insert the filter B into the projector.
A
B
Notes
We advise you to clean the filter every 100 hours. Operating the projector without filter or with a torn
or damaged filter may seriously damage the projector.
When the filter is damaged replace it with a filter of the same type (12 nc: 3122 434 0157 0).
The projector power cannot be switched on again unless the filter holder is installed correctly.
Philips Home Cinema Projector
English User guide Garbo
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Maintenance
>
Lam p
When operation time reaches the last 100 hours of the average lamplife, the message ‘Warning:
lamplife has almost expired’ will be displayed on the screen, each time the projector is switched
on.The lamp indicator lights up orange.
Warning:ꢀ
ꢀ
Lamplife has almost expiredꢀ
ꢀ
It is suggested to have a spare lamp available. ꢀ
The lamp type is indicated in the user guide.
The lamplife remaining can be checked using the OSD menu.
1
–
2
3
Press Menu.
AV
Source
Menu
O K
Mute
The menu bar appears on the screen.
Use Cursor Control to move the cursor to ‘Settings’.
Use Cursor Control to select ‘Lamp counter’.
Lam p
Te m p
Stand
by
–
The remaining lamplife hours are displayed in the action window at the bottom of the
screen.
Pictureꢀ
Display
Audio
Settings
ꢀ
(previous)ꢀ
Start-up screenꢀ
Lamp counterꢀ
Auto standbyꢀ
Auto sourceꢀ
Feedbackꢀ
ꢀ
ꢀ
Lampꢀ
5 Hoursꢀ
ꢀ
Lamp counter shows the operating hours of the ꢀ
lamp. It is suggested to reset when a new lamp is ꢀ
inserted. To reset keep OK key pressed ꢀ
for 3 seconds.
–
When the lamplife has expired, the lamp indicator lights up red and the message
‘Warning: lamplife has expired’ is displayed on the screen.
Warning:ꢀ
ꢀ
Lamplife has expiredꢀ
ꢀ
It is suggested to change the lamp, to avoid sudden ꢀ
failure and to improve overall picture quality.
Lam p Replacem ent
1
2
Switch off the projector and wait until the lamp has cooled down (about 5 minutes) before
disconnecting the projector. Remove the mains lead from both projector and wall socket.
The mains lead must be disconnected from the projector otherwise the lamp door
cannot be removed.
Turn the projector over. Never place the projector on the side where the connections are
located!
AV
Mute
Source
Menu
O K
Lam p
Te m p
Stand
by
3
Push tab A to the right and remove the lamp door.
–
When tab A is pressed the mains inlet socket will be partly closed. The lamp door therefore
cannot be removed if the mains lead is not disconnected from the projector.
Read the caution and warning labels on the lamp holder.
4
A
Philips Home Cinema Projector
English User guide Garbo
28
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Maintenance
<
Lam p replacem ent
5
6
•
Unscrew screw B.
Grasp the lamp holder handle and carefully pull the lamp holder out of the projector.
Do not tilt. If the inner tube is broken glass particles may fall out.
•
Keep lamp holder opening to your right. Do not touch lamp or point lamp holder opening
at anyone.
B
7
•
•
•
8
9
Carefully remove the new lamp housing from its package.
Always use the same type of lamp: LCA3116/00 (132 W), 12nc: 8670 931 16009.
Do not touch lamp or point lamp housing opening at anyone.
Do not drop, as the impact may cause the lamp to break.
Place the lamp holder in the guiding slots and insert into the lamp compartment.
Tighten screw B again.
B
10 Put the lamp door back in place and press tab A back in its original position.
The Mains inlet socket will open again.
–
11 Insert the mains lead into both the projector Mains inlet socket and the wall socket.
12 Press the Standby button to switch on the projector.
A
13 Reset the lamp life time (see ‘Resetting the lamplife time’).
14 Dispose of the old lamp in special chemical disposal bins.
Resetting the lam plife
tim e
1
–
Press Menu.
The menu bar appears on the screen.
AV
Mute
Source
Menu
O K
Lam p
Te m p
Stand
by
2
3
Use cursor control to select ‘Settings’ in the menu bar.
Use cursor control to select ‘Lamp counter’ in the sub menu.
Pictureꢀ
ꢀ
(previous)ꢀ
Display
Audio
Settings
Start-up screenꢀ
Lamp counterꢀ
Auto standbyꢀ
Auto sourceꢀ
Feedbackꢀ
ꢀ
ꢀ
ꢀ
Lampꢀꢀ
0 hoursꢀ
ꢀ
Lamp counter shows the operating hours of the ꢀ
lamp. It is suggested to reset when a new lamp is ꢀ
inserted. To reset keep OK key pressed ꢀ
for 3 seconds.
4
5
Press OK for 3 seconds to reset the lamp counter.
If required, select another item you wish to adjust or press Menu to exit.
Philips Home Cinema Projector
English User guide Garbo
29
Download from Www.Somanuals.com. All Manuals Search And Download.
7.Troubleshooting
>
If a fault occurs, first check the points listed below before taking the projector for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service
organisation.
W arning
Under no circumstances should you try to repair the projector yourself as this could invalidate the
guarantee.
Read as follows
Problem
–
Possible cause
•
Solution
Im age is not or incorrectly
displayed
General
–
Mains lead is not correctly connected.
•
Correctly connect mains lead.
–
The filter holder is not installed correctly or is damaged.
•
Install the filter holder correctly (see ‘Cleaning the dust filter’ under ‘Maintenance’).
–
Lamp holder cover is not closed correctly or the lamp holder is damaged.
•
Close the cover correctly (see ‘Lamp replacement’ under ‘Maintenance’).
–
Signal cable not correctly connected.
•
Connect signal cable correctly.
–
The projector is in Off position.
•
Press Standby to switch on the projector.
–
A/V Mute active.
•
Cancel A/V Mute.
–
•
‘Shift’ and/or ‘Horizontal size’ are not adjusted correctly.
Adjust ‘Shift’ or ‘Horizontal size’ (see ’Display adjustment’ under
‘Operation’ - ‘On Screen Display Menu’).
•
Activate the ‘Auto-image’ function via the On Screen Display menu.
In Component Video mode
–
•
‘Auto Image’ has not selected the correct settings for ‘Shift’ and/or ‘Horizontal Size’.
Adjust ‘Shift’ or ‘Horizontal size’ (see ’Display adjustment’ under
‘Operation’ - ‘On Screen Display Menu’).
•
•
Activate the ‘Auto-image’ function via the On Screen Display menu.
Reset all settings to the default factory settings with the ‘Factory reset’ option in the
‘Settings’ menu.
–
•
Keystoning is applied on a high resolution component signal.
Decrease keystoning until the image is correctly displayed. For this use the the ‘Keystone
correction’ option in the ‘Settings’ menu.
Philips Home Cinema Projector
English User guide Garbo
30
Download from Www.Somanuals.com. All Manuals Search And Download.
7.Troubleshooting
>
In Data mode
–
Input resolution is too high (and keystoning is applied).
•
If you wish to keep the keystone correction, decrease the input resolution until the image is
correctly displayed. For this, refer to the User Guide or support information of the
computer.
•
If you wish to keep the input resolution as it is, decrease keystoning until the image is
correctly displayed. For this, use the ‘Keystone correction’ option in the ‘Settings’ menu.
–
Input resolution is too high (and no keystoning is applied).
•
Decrease the input resolution until the image is correctly displayed. For this, refer to the
User Guide or support information of the computer.
In case of RGBS (Scart) connection:
–
•
Component input will not be selected automatically in case of RGBS connection.
Select ‘Component input’ manually using the Source button on the projector or the remote
control.
Poor colour
•
•
Adjust ‘Brightness’,‘Contrast’,‘Saturation’ or ‘Hue’ (see ’Picture adjustment’ under ‘Operation’
- ‘On Screen Display Menu’).
Reset all projector settings in the ‘Settings’ menu (‘Factory reset’).
Im age is blurred
–
Image is not focused.
•
Adjust focus ring.
–
Distance between projector and screen is not correct.
•
Adjust the distance between the projector and the screen.
–
Signal cable is not correctly connected.
•
Connect signal cable correctly.
Picture rolls
No sound
–
•
Signal cable is not correctly connected.
Connect signal cable correctly.
–
Audio cable is not correctly connected.
•
Connect audio cable correctly.
–
Volume is not adjusted properly.
•
Adjust volume.
–
(A/V-)Mute active.
•
Cancel (A/V-)Mute.
Philips Home Cinema Projector
English User guide Garbo
31
Download from Www.Somanuals.com. All Manuals Search And Download.
7.Troubleshooting
>
The projector does not
react to com m ands from
the rem ote control
–
•
Distance is too great.
Reduce distance.
–
Batteries are exhausted.
•
Replace batteries (see ‘Inserting the batteries in the remote control’).
–
IR sensor is obstructed.
•
Remove obstacle.
Indicators
Lamp indicator
–
–
green: normal lamp condition.
orange: lamp life has almost expired (less than 100 hours to go).
• See warning messages on the start up screen for details.
red: lamp life has expired.
• Replace lamp. See ‘Maintenance’.
red (fast blinking): lamp start has failed.
–
–
• Disconnect projector from the mains. Reconnect and restart. If this does not resolve the
problem, replace the lamp. See ‘Maintenance’.
Temperature indicator
–
red: temperature error.
• The projector will go into Power/Standby mode. Allow the projector to cool down;
this may take up to 30 minutes.When the LED goes out press any button to activate the
projector again.
–
fast blinking red: fan error.
• The projector will go into Power Standby mode. Make sure the filter cover is closed
properly; clean air inlets or dust filter and allow the projector to cool down; this may take
up to 30 minutes.When the LED stops flashing press any button to activate the projector
again.
Standby indicator (text on Standby button/ring around Standby button)
–
–
–
–
red: standby mode.
green: operation mode.
orange: warming up.
slow blinking (orange): cooling down.
• Do not switch the projector off; it will restart the lamp automatically within a few seconds.
Picture too dark or bright
with external m onitor
connected
–
•
’Monitor out’ has been enabled, but the external monitor is not correctly connected (the picture
on both displays is too bright).
Connect the (optional) VGA Y-cable (See ‘Connecting to an external monitor’ under
‘Installation’).
•
If the VGA Y-cable is correctly connected, verify whether the input impedance of the monitor
is correctly set on 75 Ohm.
–
’Monitor out’ has not been enabled, but the external monitor is connected
(the picture on both displays is too dark).
•
Enable the ’Monitor out’ option. Press Menu and use cursor control to go to ‘Settings’ in the
menu bar. Select ’Monitor out’ and select ‘On’.
No reaction when pressing
keys on local keyboard or
rem ote control
–
•
’Keylock’ active.
Press OK for 10 seconds to cancel ‘Keylock.’
Philips Home Cinema Projector
English User guide Garbo
32
Download from Www.Somanuals.com. All Manuals Search And Download.
7.Troubleshooting
<
The m ouse cursor does
not react when using the
cursor control on the
rem ote control
General:
•
Check that the batteries are installed properly in the remote control and/or replace the
batteries.
•
•
•
•
Check that the projector receives the signals from the remote control.
Check that the USB cable or PS/2 cable has been properly connected.
Check that both projector and computer are switched on.
Unplug the USB cable or PS/2 cable and then reconnect.
In case of PS/2 connection:
–
The PS/2 mouse of the connected laptop has priority over the projector mouse loop through
connection.
•
Disable the PS/2 mouse of the laptop by selecting ‘Disable in hardware profile’ in the
‘Windows Mouse Properties’ of the laptop.Then restart ‘Windows’ on the laptop.
The projector mouse loop through connection now has priority while the laptop mouse can
still be used.
•
•
Switch off all devices and then reconnect while you make sure that you:
• connect the PS/2 cable to PC and projector before switching on the PC;
• switch on the projector before switching on the PC;
• do not connect the USB cable when making the PS/2 connection.
Also refer to the User Guide or support information of your computer.
In case of USB connection:
•
Connect another USB device (mouse, scanner, webcam, etc.) and see if it works.
If it does not work there is a problem with the computer.
•
Also refer to the User Guide or support information of the computer.
–
‘Windows’ did not manage to install the driver correctly. In this case the ‘Device manager’ will
contain a catagory ‘Other devices.
• Disconnect the projector.
• Remove all items listed under ‘Other devices’ in the ‘Device manager’.
• Restart the computer.
• Reconnect the projector.
Com puter asks for drivers
•
•
In case the computer asks for monitor drivers, install the drivers on the CD-ROM supplied
with the projector.
In case the computer asks for a USB-device driver, install the required drivers on the
CD-ROM supplied with the computer.
Note
The Philips Garbo Matchline projector uses three LCD (Liquid Crystal Display) panels.These panels
contain a total of 1,200,000 pixels. As with any equipment, certain tolerances apply to the
performance specification of the product. Philips’ specifications for defective pixels is very severe. Only
one bright blue pixel is allowed.This pixel will not affect the overall picture quality or the life
expectancy of the projector.
Philips Home Cinema Projector
English User guide Garbo
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|