Hybrid IP-PBX
PT Programming Manual
Model No.
KX-TDA15
Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
PSMPR Software File Version 4.0000 or later
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
•
The contents of this manual apply to PBXs with a certain software version, as indicated on the
•
Some optional service cards, PTs, and features are not available in some areas. Additionally,
some optional service cards and features are not available for some PBX models. Please consult
your certified Panasonic dealer for more information.
•
•
Product specifications are subject to change without notice.
Throughout this manual, PT displays and other displays are shown in English. Other languages
may be available, depending on the country or area.
The KX-TDA15E, KX-TDA15NE, KX-TDA15GR, and KX-TDA15CE are designed to interwork
with the:
• Analogue Public Switched Telephone Network (PSTN) of European countries
• Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access
Panasonic Communications Company (U.K.) Ltd. declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment
(R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are available for
download by visiting:
Contact:
Panasonic Services Europe
a Division of Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
PT Programming Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1 Overview..................................................................................................9
1.1
Introduction ....................................................................................................................10
Introduction ......................................................................................................................10
Password Security............................................................................................................11
Entering Characters .........................................................................................................12
1.1.1
1.1.2
1.1.3
2 PT Programming...................................................................................15
2.1
PT Programming ............................................................................................................16
Programming Instructions ................................................................................................16
Entry Values.....................................................................................................................19
2.1.1
2.1.2
2.1.3
Basic Programming..........................................................................................................20
[000] Date & Time............................................................................................................................................ 20
[001] System Speed Dialling Number.............................................................................................................. 20
[002] System Speed Dialling Name................................................................................................................. 20
[003] Extension Number.................................................................................................................................. 20
[004] Extension Name ..................................................................................................................................... 21
[005] Extension Personal Identification Number (PIN) .................................................................................... 21
[006] Operator Assignment.............................................................................................................................. 21
[007] DSS Console Paired Telephone............................................................................................................. 21
[008] Absent Message..................................................................................................................................... 22
[010] Charge Margin........................................................................................................................................ 22
[011] Charge Tax ............................................................................................................................................. 22
[012] Charge Rate per Unit.............................................................................................................................. 22
2.1.4
System Management Programming.................................................................................23
[100] Flexible Numbering................................................................................................................................. 23
[101] Time Service Switching Mode................................................................................................................ 23
[102] Time Service Starting Time.................................................................................................................... 23
[103] Idle Line Access (Local Access)............................................................................................................. 24
[110] System Password for Administrator—for PT Programming.................................................................... 24
[111] System Password for User—for PT Programming.................................................................................. 24
[112] Manager Password................................................................................................................................. 24
[120] Verification Code .................................................................................................................................... 24
[121] Verification Code Name.......................................................................................................................... 24
[122] Verification Code Personal Identification Number (PIN)......................................................................... 24
[123] Verification Code COS Number.............................................................................................................. 25
[130] Decimal Point Position for Currency ....................................................................................................... 25
[131] Currency................................................................................................................................................. 25
[190] Main Processing (MPR) Software Version Reference............................................................................ 25
2.1.5
Timer Programming .........................................................................................................26
[200] Hold Recall Time .................................................................................................................................... 26
[201] Transfer Recall Time............................................................................................................................... 26
[203] Intercept Time......................................................................................................................................... 26
[204] Hot Line Waiting Time ............................................................................................................................ 26
[205] Automatic Redial Repeat Times............................................................................................................. 26
[206] Automatic Redial Interval........................................................................................................................ 26
[207] Door Unlock Time................................................................................................................................... 26
[208] Call Duration Count Starting Time for LCOT.......................................................................................... 27
[209] DISA Delayed Answer Time ................................................................................................................... 27
[210] DISA Trunk-to-Trunk Call Prolong Time.................................................................................................. 27
[211] DISA Intercept Time ............................................................................................................................... 27
2.1.6
TRS/Barring/ARS Programming ......................................................................................28
[300] TRS/Barring Override by System Speed Dialling................................................................................... 28
[301] TRS/Barring Denied Code...................................................................................................................... 28
[302] TRS/Barring Exception Code ................................................................................................................. 28
4
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
[303] Special Carrier Access Code..................................................................................................................28
[304] Emergency Number................................................................................................................................28
[320] ARS Mode ..............................................................................................................................................28
[321] ARS Leading Number.............................................................................................................................29
[322] ARS Routing Plan Table Number............................................................................................................29
[325] ARS Exception Number..........................................................................................................................29
[330] ARS Routing Plan Time Table ................................................................................................................29
[331–346] ARS Routing Plan Table (1–16)......................................................................................................29
[350] ARS Carrier Name..................................................................................................................................30
[351] ARS Trunk Group for Carrier Access......................................................................................................30
[352] ARS Removed Number of Digits for Carrier Access...............................................................................30
[353] ARS Carrier Access Code ......................................................................................................................30
Trunk Programming ......................................................................................................... 31
[400] LCOT/BRI Trunk Connection ..................................................................................................................31
[401] LCOT/BRI Trunk Name...........................................................................................................................31
[402] LCOT/BRI Trunk Group Number.............................................................................................................31
[409] LCOT/BRI Trunk Number Reference ......................................................................................................31
[410] LCOT Dialling Mode................................................................................................................................31
[411] LCOT Pulse Rate....................................................................................................................................31
[412] LCOT DTMF Minimum Duration .............................................................................................................32
[413] LCOT CPC Signal Detection Time—Outgoing .......................................................................................32
[414] LCOT CPC Signal Detection Time—Incoming .......................................................................................32
[415] LCOT Reverse Circuit.............................................................................................................................32
[416] LCOT Pause Time ..................................................................................................................................32
[417] LCOT Flash/Recall Time.........................................................................................................................32
[418] LCOT Disconnect Time...........................................................................................................................32
[420] BRI Network Type...................................................................................................................................33
[421] BRI DIL/DDI/MSN Selection ...................................................................................................................33
[422] BRI Subscriber Number..........................................................................................................................33
[424] BRI Layer 1 Active Mode ........................................................................................................................33
[425] BRI Layer 2 Active Mode ........................................................................................................................33
[426] BRI Configuration ...................................................................................................................................33
[427] BRI TEI Mode .........................................................................................................................................34
[450] DIL 1:1 Destination .................................................................................................................................34
[451] DID Number............................................................................................................................................34
[452] DID Name...............................................................................................................................................34
[453] DID Destination.......................................................................................................................................34
[471] Host PBX Access Code..........................................................................................................................34
[472] Extension-to-Trunk Call Duration............................................................................................................35
[473] Trunk-to-Trunk Call Duration...................................................................................................................35
[475] DISA Silence Detection ..........................................................................................................................35
[476] DISA Continuous Signal Detection.........................................................................................................35
[477] DISA Cyclic Signal Detection..................................................................................................................35
[490] Caller ID Signal Type ..............................................................................................................................35
2.1.7
2.1.8
COS Programming .......................................................................................................... 36
[500] Trunk Group Number ..............................................................................................................................36
[501] TRS/Barring Level...................................................................................................................................36
[502] Trunk Call Duration Limitation.................................................................................................................36
[503] Call Transfer to Trunk..............................................................................................................................36
[504] Call Forwarding to Trunk.........................................................................................................................36
[505] Executive Busy Override.........................................................................................................................37
[506] Executive Busy Override Deny ...............................................................................................................37
[507] DND Override .........................................................................................................................................37
[508] Account Code Mode ...............................................................................................................................37
[509] TRS/Barring Level for System Speed Dialling ........................................................................................37
[510] TRS/Barring Level for Extension Dial Lock.............................................................................................37
[511] Manager Assignment..............................................................................................................................37
[512] Permission for Door Open Access..........................................................................................................38
[514] Time Service Manual Switching..............................................................................................................38
PT Programming Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
[515] Wireless XDP Parallel Mode for Paired Telephone................................................................................. 38
[516] Programming Mode Limitation................................................................................................................ 38
2.1.9
Extension Programming...................................................................................................39
[600] EXtra Device Port (XDP) Mode .............................................................................................................. 39
[601] Terminal Device Assignment .................................................................................................................. 39
[602] Class of Service ..................................................................................................................................... 39
[603] Extension User Group ............................................................................................................................ 39
[604] Extension Intercept Destination.............................................................................................................. 39
[605] Call Forwarding—No Answer Time ........................................................................................................ 39
[606] CLIP/COLP Number............................................................................................................................... 40
[620] Incoming Call Distribution Group Member.............................................................................................. 40
[621] Incoming Call Distribution Group Delayed Ringing................................................................................. 40
[622] Incoming Call Distribution Group Floating Extension Number ............................................................... 40
[623] Incoming Call Distribution Group Name ................................................................................................. 40
[624] Incoming Call Distribution Group Distribution Method............................................................................ 41
[625] Destination for Overflow Time Expiration ............................................................................................... 41
[626] Overflow Time ........................................................................................................................................ 41
[627] Destination When All Busy ..................................................................................................................... 41
[628] Queuing Call Capacity............................................................................................................................ 41
[629] Queuing Hurry-up Level ......................................................................................................................... 42
[630] Queuing Time Table ............................................................................................................................... 42
[631] Sequences in Queuing Time Table......................................................................................................... 42
[632] Maximum Number of Agents.................................................................................................................. 42
[640] Extension User Groups of a Paging Group ............................................................................................ 42
[641] External Pagers of a Paging Group........................................................................................................ 43
[650] Extension User Groups of a Pickup Group............................................................................................. 43
[660] VM Group Floating Extension Number................................................................................................... 43
[680] Idle Extension Hunting Type................................................................................................................... 43
[681] Idle Extension Hunting Group Member .................................................................................................. 43
[690] PS Registration....................................................................................................................................... 44
[691] PS Termination....................................................................................................................................... 44
[692] Personal Identification Number (PIN) for PS Registration...................................................................... 44
[699] CS Status Reference.............................................................................................................................. 44
2.1.10 Resource/Interface Programming ....................................................................................45
[700] External Pager Floating Extension Number ........................................................................................... 45
[710] Music Source Selection for BGM............................................................................................................ 45
[711] Music on Hold......................................................................................................................................... 45
[712] Music for Transfer ................................................................................................................................... 45
[720] Doorphone Call Destination ................................................................................................................... 45
[729] Doorphone Number Reference .............................................................................................................. 45
[730] Outgoing Message (OGM) Floating Extension Number.........................................................................46
[731] Outgoing Message (OGM) Name........................................................................................................... 46
[732] DISA Security Mode............................................................................................................................... 46
2.1.11 SMDR & Maintenance Programming...............................................................................47
[800] RS-232C Parameter—New Line Code................................................................................................... 47
[800] RS-232C Parameter—Baud Rate........................................................................................................... 47
[800] RS-232C Parameter—Word Length....................................................................................................... 47
[800] RS-232C Parameter—Parity Bit ............................................................................................................. 47
[800] RS-232C Parameter—Stop Bit Length................................................................................................... 47
[801] External Modem Control......................................................................................................................... 47
[802] SMDR Page Length................................................................................................................................ 47
[803] SMDR Skip Perforation........................................................................................................................... 48
[804] SMDR Outgoing Call Printing................................................................................................................. 48
[805] SMDR Incoming Call Printing................................................................................................................. 48
[810] Remote Programming ............................................................................................................................ 48
[812] ISDN Remote Floating Extension Number............................................................................................. 48
2.1.12 Card Programming...........................................................................................................49
[900] Slot Card Type Reference ...................................................................................................................... 49
[901] Slot Card Deletion .................................................................................................................................. 49
6
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
[902] Slot Card Reset ......................................................................................................................................49
3 Appendix................................................................................................51
3.1
3.1.1
3.2
Revision History ............................................................................................................ 52
KX-TDA15 PSMPR Software File Version 4.0xxx ........................................................... 52
Feature Programming References............................................................................... 53
PT Programming Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Introduction
1.1 Introduction
1.1.1 Introduction
These programming instructions are designed to serve as an overall system programming reference
for the Panasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed
to customise the PBX to your requirements. These settings control the functions of the PBX, and
changing them is referred to as "system programming".
Only one person can perform system programming at a time. Any other users trying to enter system
programming mode will be denied access.
Ways to Programme
There are two programming methods:
•
PC (Personal Computer) Programming
All features and settings of the PBX can be programmed through PC programming with
Maintenance Console. Installing and starting Maintenance Console are explained in the
Installation Manual.
•
PT (Proprietary Telephone) Programming
A subset of the features and settings of the PBX can be programmed using a PT. PT
system programming by entering three-digit programming numbers with a PT.
10
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Introduction
1.1.2 Password Security
To maintain system security, system passwords are required to access certain programming
functions of the PBX. By giving different users access to different passwords, it is possible to control
the amount of programming that each user is able to perform.
The following types of system passwords are available:
Password
Description
Format
System Password (PT) for Used to access user-level PT programming. The
4 – 10
digits
User
specific PT programming items that may be
programmed at user level can be selected through
system programming.
System Password (PT) for Used to access administrator-level PT programming. All
Administrator PT programming settings are available.
Warning to the Administrator or Installer regarding the system password
1. Please provide all system passwords to the customer.
2. To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret,
and inform the customer of the importance of the passwords, and the possible dangers if
they become known to others.
3. The PBX has default passwords preset. For security, change these passwords the first time
that you programme the PBX.
4. Change the passwords periodically.
5. It is strongly recommended that passwords of 10 numbers or characters be used for
maximum protection against unauthorised access. For a list of numbers and characters that
PT Programming Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Introduction
1.1.3 Entering Characters
The following characters can be used when storing a name, message, or other text entry data using
a PT. The tables below show you the characters available by pushing each button a specific number
of times.
Table 1 (Standard mode)
Table 2 (Option mode)
12
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Introduction
Table 2 (Option mode for CE model)
Table 2 (Option mode for GR model)
PT Programming Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Introduction
[Example of Entering Characters]
To enter "Ann":
n
n
A
(5 times)
(5 times)
2
6
OR
FWD/DND
6
Notes
•
•
•
To erase the character on the cursor, press CLEAR.
To move the cursor to the left, press
To move the cursor to the right, press
.
. When entering two or more characters that use
the same button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND
button after entering the first character.
•
•
If SELECT is pressed, the characters for each button will be displayed in reverse order.
To toggle between Table 1 and Table 2 when using the KX-T7600 series or an IP-PT, press
the leftmost soft button.
14
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1 PT Programming
2.1.1 Programming Instructions
Required Telephone/Extension
PBX settings can be customised through system programming by using a proprietary telephone (PT)
with a multiline display, such as the KX-T7636. To access system programming, the Class of Service
(COS) assigned to the PT's extension must be programmed to allow system programming, or the PT
must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
Only one system programming session can be performed at a time. This means that only one user
can access system programming at a time, whether through a PT or PC.
For a list of characters that can be entered during system programming, see Section 1.1.3 Entering
Buttons and Functions
Fixed Buttons
Function
KX-T7200/KX-T7400/
KX-T7600/IP-PT*1
KX-T7500*2
REDIAL
PREVIOUS
SP-PHONE
NEXT
FWD/DND
(Page up)
CONF
(Page down)
AUTO DIAL
ENTER
STORE
Back to Previous Menu
—
(CANCEL)
SHIFT
SHIFT
SHIFT
PROGRAM
END
PAUSE
PROGRAM
PAUSE
HOLD
HOLD
16
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
Fixed Buttons
Function
KX-T7200/KX-T7400/
KX-T7500*2
KX-T7600/IP-PT*1
AUTO ANS
MESSAGE
AUTO ANSWER
MUTE
MESSAGE
SELECT
FLASH
MUTE
FLASH/
FLASH
RECALL
TRANSFER
CLEAR
SECRET
TRANSFER
INTERCOM
INTERCOM
*1:
*2:
The buttons shown in this column are from the KX-T7600 series.
The buttons shown in this column are from the KX-T7400 series.
Entering System Programming Mode
Using a PT to perform system programming allows an authorised extension user to set a wide range
of PBX features and parameters.
There are two levels of system programming that can be performed with a PT: administrator-level
programming and user-level programming.
Administrator Level:
Allows the programming of all settings accessible through PT programming.
System Password for Administrator
#
Programming No.
—for PT Programming
PROGRAM/
PAUSE
3 digits
= 1234
User Level:
Allows the programming of limited settings as permitted through PC programming.
System Password for User
—for PT Programming
Programming No.
PROGRAM/
PAUSE
3 digits
= 1234
Note
means default value throughout this manual.
Programming Structure
Programming
Programming Group Title
Basic Programming
Description
Frequently used programming steps
Number
[0XX]
PT Programming Manual
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
Programming
Programming Group Title
Description
Number
System Management
Programming
Global system parameters
[1XX]
[2XX]
Timer Programming
System timers
TRS/Barring/ARS
Programming
TRS/Barring and Automatic Route
Selection (ARS) programming
[3XX]
[4XX]
[5XX]
[6XX]
Trunk Programming
COS Programming
Trunk, trunk group, and BRI line settings
Class of Service parameters
Extension Programming
Extension feature settings
Resource/Interface
Programming
PBX interface and external device
settings
[7XX]
[8XX]
SMDR & Maintenance
Programming
Station Message Detail Recording
(SMDR) and maintenance feature
settings
Card Programming
Used to display the cards currently
installed in the PBX, or to delete a card
from system programming before
physically removing it.
[9XX]
18
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.2 Entry Values
Throughout this manual, maximum entry values are shown for each programming item, as shown in
the example below.
Carrier Table No.
Trunk Group No.
[351]
SELECT
Disable/
Enable
END
01–10
01–64
ENTER
ENTER
Slot and Port Values
Available Slot Entry Values
Slot Number
Supported Cards
01
Pre-installed Super Hybrid Ports
Pre-installed BRI2 card
02
03–04
05–06
09
BRI1, BRI2 (slot 03 only), LCOT2 cards
DLC8 card
DPH2, DPH4 cards
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
Available Port Entry Values
Card Type
Port Number
01
Related Programming
[400] [409] [42x] [450]
[600] [601]
BRI1
BRI2
01–02
01–08
01–02
01–04
01–02
DLC8
DPH2
DPH4
LCOT2
[72x]
[400] [409] [41x] [450]
[600] [601]
Pre-installed Super Hybrid Ports 01–04
Enter values as two-digit numbers (e.g. "04" for port 4).
PT Programming Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.3 Basic Programming
[000] Date & Time
[In 12-hour Format]
Date
Year
Month
[000]
01–31
01–12
00–99
ENTER
ENTER
ENTER
Minute
00–59
Hour
01–12
SELECT
(AUTO ANS/MESSAGE)
AM/PM
END
(HOLD)
NEXT
[In 24-hour Format]
Date
Year
Month
[000]
01–12
00–99
01–31
ENTER
ENTER
Minute
Hour
00–59
END
(HOLD)
00–23
ENTER
NEXT
[001] System Speed Dialling Number
Telephone No.
Speed Dialling No.
[001]
000–999
ENTER
Max. 32 digits
END
ENTER
To the Next Speed Dialling No.
To the Desired Speed Dialling No.
NEXT
CANCEL
[002] System Speed Dialling Name
Name
Max. 20 characters
Speed Dialling No.
[002]
000–999
END
ENTER
ENTER
[003] Extension Number
New Extn. No.
Current Extn. No.
[003]
1–5 digits
END
1–5 digits
ENTER
ENTER
20
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
Note
•
If PC Phone, PC Console, or a CTI application is running on a PC connected to an extension
whose extension number is to be programmed/modified, quit the application first.
[004] Extension Name
Name
Max. 20 characters
Extn. No.
1–5 digits
[004]
END
ENTER
ENTER
[005] Extension Personal Identification Number (PIN)
Extn. No.
1–5 digits
PIN
Max. 10 digits
[005]
END
ENTER
ENTER
WARNING
There is a risk that fraudulent telephone calls will be made if a third party
discovers a personal identification number (PIN) (verification code PIN or
extension PIN) of the PBX.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a) Keeping PINs secret.
b) Selecting complex, random PINs that cannot be easily guessed.
c) Changing PINs frequently.
[006] Operator Assignment
Extn. No.
1–5 digits
[006]
Time No.
END
1 Day/2 Lunch/
3 Break/4 Night
ENTER
ENTER
[007] DSS Console Paired Telephone
DSS Console No.
Extn. No.
1–5 digits
[007]
END
01–04
ENTER
ENTER
Note
This programme is only available after the port connected to the DSS Console is assigned as
PT Programming Manual
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[008] Absent Message
Message
Max. 16 characters
Location No.
[008]
END
1–8
ENTER
ENTER
[010] Charge Margin
Margin XX.YY%
2+2 decimal places
[010]
END
ENTER
ENTER
[011] Charge Tax
Location No.
Tax XX.YY%
2+2 decimal places
[011]
END
01–03
ENTER
ENTER
[012] Charge Rate per Unit
Charge Rate
Max. 8 digits
including decimal point
Trunk Group No.
[012]
END
01–64
ENTER
ENTER
22
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.4 System Management Programming
[100] Flexible Numbering
Location No.
Feature No.
[100]
END
(HOLD)
01–68
1–4 digits
ENTER
ENTER
To the Next Location No.
To the Desired Location No.
NEXT
CANCEL
[101] Time Service Switching Mode
SELECT
(AUTO ANS/MESSAGE)
[101]
END
ENTER
Manual/Automatic
ENTER
[102] Time Service Starting Time
[In 12-hour Format]
Day No.
Time No.
1 Day-1/2 Lunch/
3 Day-2/4 Night
[102]
0 Sun/1 Mon/
ENTER
2 Tue/3 Wed/
4 Thu/5 Fri/6 Sat
Hour:Minute
01:00–12:59
SELECT
AM/PM
END
ENTER
To the Next Time No.
To the Next Day No.
NEXT
Page up
[In 24-hour Format]
Hour:Minute
00:00–23:59
Day No.
0 Sun/1 Mon/
2 Tue/3 Wed/
4 Thu/5 Fri/6 Sat
Time No.
1 Day-1/2 Lunch/
3 Day-2/4 Night
[102]
END
ENTER
ENTER
To the Next Time No.
To the Next Day No.
NEXT
Page up
PT Programming Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[103] Idle Line Access (Local Access)
Location No.
Trunk Group No.
[103]
END
01–64
01–64
ENTER
ENTER
[110] System Password for Administrator—for PT Programming
Password
4–10 digits
1234
[110]
END
ENTER
ENTER
[111] System Password for User—for PT Programming
Password
4–10 digits
1234
[111]
END
ENTER
ENTER
[112] Manager Password
Password
4–10 digits
1234
[112]
END
ENTER
ENTER
[120] Verification Code
Location No.
Verification Code
[120]
END
0001–1000
1–4 digits
ENTER
ENTER
[121] Verification Code Name
Location No.
Name
Max. 20 characters
[121]
END
0001–1000
ENTER
ENTER
[122] Verification Code Personal Identification Number (PIN)
Location No.
PIN
Max. 10 digits
[122]
END
0001–1000
ENTER
ENTER
24
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
WARNING
There is a risk that fraudulent telephone calls will be made if a third party
discovers a personal identification number (PIN) (verification code PIN or
extension PIN) of the PBX.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a) Keeping PINs secret.
b) Selecting complex, random PINs that cannot be easily guessed.
c) Changing PINs frequently.
[123] Verification Code COS Number
Location No.
COS No.
01–64
[123]
END
0001–1000
ENTER
ENTER
[130] Decimal Point Position for Currency
Desired No.
[130]
END
0–6
ENTER
ENTER
[131] Currency
Currency
3 characters
[131]
END
ENTER
ENTER
[190] Main Processing (MPR) Software Version Reference
MPR Version
Reference only
[190]
END
ENTER
PT Programming Manual
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.5 Timer Programming
[200] Hold Recall Time
Time
0–240 s
[200]
END
(HOLD)
ENTER
ENTER
[201] Transfer Recall Time
[201]
Time
1–240 s
END
ENTER
ENTER
[203] Intercept Time
Time No.
1 Day/2 Lunch
3 Break/4 Night
Time
1–240 s
[203]
END
ENTER
ENTER
[204] Hot Line Waiting Time
Time
0–15 s
[204]
END
ENTER
ENTER
[205] Automatic Redial Repeat Times
Number of Times
[205]
END
0–10
ENTER
ENTER
[206] Automatic Redial Interval
Time
(1–120) ×10 s
[206]
END
ENTER
ENTER
[207] Door Unlock Time
Time
2–7 s
[207]
END
ENTER
ENTER
26
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[208] Call Duration Count Starting Time for LCOT
Time
0–60 s
[208]
END
ENTER
ENTER
[209] DISA Delayed Answer Time
Time
0–30 s
[209]
END
ENTER
ENTER
[210] DISA Trunk-to-Trunk Call Prolong Time
Time
0–7 min
[210]
END
ENTER
ENTER
[211] DISA Intercept Time
Time
0–60 s
Time No.
1 Day/2 Lunch
3 Break/4 Night
[211]
END
ENTER
ENTER
PT Programming Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.6 TRS/Barring/ARS Programming
[300] TRS/Barring Override by System Speed Dialling
[300]
SELECT
(AUTO ANS/MESSAGE)
Disable/Enable
END
(HOLD)
ENTER
ENTER
[301] TRS/Barring Denied Code
Level No.
Location No.
Denied Code
Max. 16 digits
[301]
END
2–6
001–100
ENTER
ENTER
To the Next Location No.
To the Desired Location No.
NEXT
CANCEL
[302] TRS/Barring Exception Code
Exception Code
Level No.
Location No.
[302]
END
2–6
001–100
Max. 16 digits
ENTER
ENTER
[303] Special Carrier Access Code
Location No.
Carrier Access Code
[303]
END
01–20
Max. 16 digits
ENTER
ENTER
[304] Emergency Number
Emergency No.
Location No.
[304]
END
01–10
Max. 32 digits
ENTER
ENTER
[320] ARS Mode
[320]
SELECT
Off/Idle Line/
All Access
END
ENTER
ENTER
28
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[321] ARS Leading Number
Location No.
0001–1000
Leading No.
Max. 16 digits
[321]
END
ENTER
ENTER
[322] ARS Routing Plan Table Number
Location No.
0001–1000
Plan Table No.
[322]
END
01–16
ENTER
ENTER
[325] ARS Exception Number
Location No.
001–200
Exception No.
[325]
END
Max. 16 digits
ENTER
ENTER
[330] ARS Routing Plan Time Table
[In 12-hour Format]
Plan Table No.
Day No.
ARS Time No.
[330]
01–16
0 Sun/1 Mon/2 Tue/
1 TimeA/2 TimeB/
ENTER
3 Wed/4 Thu/5 Fri/6 Sat
3 TimeC/4 TimeD
Hour:Minute
01–12/00–59
SELECT
AM/PM
END
ENTER
[In 24-hour Format]
Plan Table No.
Day No.
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
ARS Time No.
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
[330]
01–16
ENTER
Hour:Minute
00–23/00–59
END
ENTER
[331–346] ARS Routing Plan Table (1–16)
Day No.
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
Priority
ARS Time No.
[331–346]
1 TimeA/2 TimeB/
1–6
ENTER
3 TimeC/4 TimeD
Carrier Table No.
END
1–10/None
ENTER
PT Programming Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[350] ARS Carrier Name
Carrier Table No.
Name
Max. 20 characters
[350]
END
01–10
ENTER
ENTER
[351] ARS Trunk Group for Carrier Access
Carrier Table No.
Trunk Group No.
[351]
SELECT
Disable/
Enable
END
END
END
01–10
01–64
ENTER
ENTER
[352] ARS Removed Number of Digits for Carrier Access
Digits to Remove
Carrier Table No.
[352]
01–10
0–15
ENTER
ENTER
[353] ARS Carrier Access Code
Carrier Table No.
Carrier Access Code
[353]
01–10
Max. 32 digits
ENTER
ENTER
30
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.7 Trunk Programming
[400] LCOT/BRI Trunk Connection
[400]
Slot No.
02–04
Port No.
01–02
SELECT
(AUTO ANS/MESSAGE)
END
(HOLD)
ENTER
No Connect/
Connect
ENTER
To the Next Port No.
To the Desired Port No.
NEXT
CANCEL
[401] LCOT/BRI Trunk Name
Name
Max. 20 characters
[401]
Trunk No.
3 digits
END
ENTER
ENTER
[402] LCOT/BRI Trunk Group Number
Trunk Group No.
[402]
Trunk No.
3 digits
END
01–64
ENTER
ENTER
[409] LCOT/BRI Trunk Number Reference
Slot No.
02–04
Port No.
01–02
Trunk No.
Reference only
[409]
END
ENTER
[410] LCOT Dialling Mode
Slot No.
03–04
Port No.
01–02
[410]
SELECT
DTMF/Pulse
END
ENTER
ENTER
[411] LCOT Pulse Rate
Slot No.
03–04
Port No.
01–02
[411]
SELECT
Low/High
END
ENTER
ENTER
PT Programming Manual
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[412] LCOT DTMF Minimum Duration
Slot No.
03–04
Port No.
01–02
[412]
SELECT
80/160 ms
END
ENTER
ENTER
[413] LCOT CPC Signal Detection Time—Outgoing
[413]
Slot No.
03–04
Port No.
01–02
Mode No.
END
0: None/1: 6.5/
ENTER
ENTER
2–113: (N–1)×8 ms
[414] LCOT CPC Signal Detection Time—Incoming
Mode No.
[414]
Slot No.
03–04
Port No.
01–02
END
0: None/1: 6.5/
ENTER
ENTER
2–113: (N–1)×8 ms
[415] LCOT Reverse Circuit
Slot No.
03–04
Port No.
01–02
[415]
SELECT
Disable/
Outgoing/Both Call
END
ENTER
ENTER
[416] LCOT Pause Time
Slot No.
03–04
Port No.
01–02
[416]
SELECT
1.5/2.5/
3.5/4.5 s
END
ENTER
ENTER
[417] LCOT Flash/Recall Time
Slot No.
03–04
Port No.
01–02
[417]
SELECT
END
None/80/96/112/
300/600/900/
ENTER
ENTER
1200 ms/option
[418] LCOT Disconnect Time
Slot No.
03–04
Port No.
01–02
[418]
SELECT
0.5/1.5/2.0/
4.0/12.0 s
END
ENTER
ENTER
32
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[420] BRI Network Type
Slot No.
02–04
Port No.
01–02
[420]
Network Type
END
00–56
ENTER
ENTER
[421] BRI DIL/DDI/MSN Selection
Slot No.
02–04
Port No.
01–02
[421]
SELECT
DIL/DDI/MSN
END
ENTER
ENTER
[422] BRI Subscriber Number
Slot No.
02–04
Port No.
01–02
Subscriber No.
[422]
END
Max. 16 digits
ENTER
ENTER
[424] BRI Layer 1 Active Mode
Slot No.
02–04
Port No.
01–02
[424]
SELECT
Permanent/
Call by call
END
ENTER
ENTER
Note
[425] BRI Layer 2 Active Mode
Slot No.
02–04
Port No.
01–02
[425]
SELECT
Permanent/
Call by call
END
ENTER
ENTER
Note
[426] BRI Configuration
Slot No.
02–04
Port No.
01–02
[426]
SELECT
P-P/P-MP
END
ENTER
ENTER
Note
PT Programming Manual
33
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[427] BRI TEI Mode
[427]
Slot No.
02–04
Port No.
01–02
TEI
00–63 (for Fix)/
END
ENTER
ENTER
Clear (for Automatic)
Note
[450] DIL 1:1 Destination
Slot No.
02–04
Port No.
01–02
Time No.
1 Day/2 Lunch/
3 Break/4 Night
Destination No.
[450]
1–5 digits
ENTER
END
ENTER
[451] DID Number
Location No.
DID No.
Max. 32 digits
[451]
END
0001–1000
ENTER
ENTER
[452] DID Name
Location No.
Name
Max. 20 characters
[452]
END
0001–1000
ENTER
ENTER
[453] DID Destination
Time No.
Location No.
Destination No.
[453]
1 Day/2 Lunch/
3 Break/4 Night
END
0001–1000
1–5 digits
ENTER
ENTER
[471] Host PBX Access Code
Trunk Group No.
Location No.
[471]
01–64
01–10
ENTER
Host PBX Access Code
END
Max.10 digits
ENTER
34
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[472] Extension-to-Trunk Call Duration
Trunk Group No.
Time
01–60 min
[472]
END
01–64
ENTER
ENTER
[473] Trunk-to-Trunk Call Duration
Trunk Group No.
Time
01–60 min
[473]
END
01–64
ENTER
ENTER
[475] DISA Silence Detection
Trunk Group No.
[475]
SELECT
No Detect/
Detect
END
01–64
ENTER
ENTER
[476] DISA Continuous Signal Detection
Trunk Group No.
[476]
SELECT
No Detect/
Detect
END
01–64
ENTER
ENTER
[477] DISA Cyclic Signal Detection
Trunk Group No.
[477]
SELECT
No Detect/
Detect
END
01–64
ENTER
ENTER
[490] Caller ID Signal Type
Slot No.
03–04
[490]
SELECT
END
FSK/FSK with
ENTER
ENTER
Visual Caller ID/DTMF
PT Programming Manual
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.8 COS Programming
[500] Trunk Group Number
Time No.
COS No.
01–64
[500]
1 Day/2 Lunch/
ENTER
3 Break/4 Night
Trunk Group No.
SELECT
(AUTO ANS/MESSAGE)
Disable/Enable
END
(HOLD)
01–64
ENTER
To the Next
Trunk Group
No.
To the Next
COS No.
NEXT
Page up
[501] TRS/Barring Level
Time No.
COS No.
01–64
Level
1–7
[501]
END
1 Day/2 Lunch/
3 Break/4 Night
ENTER
ENTER
[502] Trunk Call Duration Limitation
COS No.
01–64
[502]
SELECT
Disable/
Enable
END
ENTER
ENTER
[503] Call Transfer to Trunk
COS No.
01–64
[503]
SELECT
END
Disable/
ENTER
ENTER
Enable
[504] Call Forwarding to Trunk
COS No.
01–64
[504]
SELECT
Disable/
Enable
END
ENTER
ENTER
36
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[505] Executive Busy Override
COS No.
01–64
[505]
SELECT
Disable/
Enable
END
ENTER
ENTER
[506] Executive Busy Override Deny
COS No.
01–64
[506]
SELECT
Disable/
Enable
END
ENTER
ENTER
[507] DND Override
COS No.
01–64
[507]
SELECT
Disable/
Enable
END
ENTER
ENTER
[508] Account Code Mode
COS No.
01–64
[508]
SELECT
Option/
Forced
END
ENTER
ENTER
[509] TRS/Barring Level for System Speed Dialling
TRS/Barring Level
COS No.
01–64
[509]
END
1–7
ENTER
ENTER
[510] TRS/Barring Level for Extension Dial Lock
TRS/Barring Level
COS No.
01–64
[510]
END
1–7
ENTER
ENTER
[511] Manager Assignment
COS No.
01–64
[511]
SELECT
Disable/Enable
END
ENTER
ENTER
PT Programming Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[512] Permission for Door Open Access
COS No.
01–64
[512]
SELECT
Disable/
Enable
END
ENTER
ENTER
[514] Time Service Manual Switching
COS No.
01–64
[514]
SELECT
Disable/
Enable
END
ENTER
ENTER
[515] Wireless XDP Parallel Mode for Paired Telephone
COS No.
01–64
[515]
SELECT
Disable/
Enable
END
ENTER
ENTER
[516] Programming Mode Limitation
COS No.
01–64
[516]
SELECT
Disable/Personal/
System&Personal
END
ENTER
ENTER
38
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.9 Extension Programming
[600] EXtra Device Port (XDP) Mode
Slot No.
Port No.
01–04
[600]
SELECT
(AUTO ANS/MESSAGE)
END
(HOLD)
01
Off/On
ENTER
ENTER
To the Next Port No.
To the Desired Port No.
NEXT
CANCEL
[601] Terminal Device Assignment
Slot No.
01, 05–06
Port No.
01–08
[601]
SELECT
Telephone/
DSS Console 01–04/
Voice Mail 1–(01–04)/
PC Console 1–2
END
ENTER
ENTER
[602] Class of Service
Extn. No.
1–5 digits
COS No.
01–64
[602]
END
ENTER
ENTER
[603] Extension User Group
Extn. No.
Extn. User Group No.
[603]
001–032
END
1–5 digits
ENTER
ENTER
[604] Extension Intercept Destination
Time No.
Extn. No.
Destination No.
[604]
END
1–5 digits
Max. 32 digits
1 Day/2 Lunch/
3 Break/4 Night
ENTER
ENTER
[605] Call Forwarding—No Answer Time
Extn. No.
1–5 digits
Time
0–120 s
[605]
END
ENTER
ENTER
PT Programming Manual
39
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[606] CLIP/COLP Number
Extn. No.
1–5 digits
CLIP/COLP No.
[606]
END
Max. 16 digits
ENTER
ENTER
[620] Incoming Call Distribution Group Member
Incoming Call
Distribution
Group No.
Location No.
Extn. No.
1–5 digits
[620]
01–32
ENTER
001–128
END
ENTER
[621] Incoming Call Distribution Group Delayed Ringing
Incoming Call
Location No.
[621]
SELECT
Distribution
Group No.
001–128
01–32
Immediate/
1–6 (rings)/
No ring
ENTER
END
ENTER
[622] Incoming Call Distribution Group Floating Extension Number
Incoming Call
Distribution
Extn. No.
[622]
END
1–5 digits
ENTER
ENTER
Group No.
001–128
[623] Incoming Call Distribution Group Name
Incoming Call
Name
Max. 20 characters
[623]
Distribution
Group No.
001–128
END
ENTER
ENTER
40
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[624] Incoming Call Distribution Group Distribution Method
Incoming Call
Distribution
Group No.
[624]
SELECT
Ring/UCD/
Priority Hunt
END
ENTER
ENTER
001–128
[625] Destination for Overflow Time Expiration
Incoming Call
Distribution
Destination No.
Time No.
[625]
Max. 32 digits
1 Day/2 Lunch/
ENTER
Group No.
3 Break/4 Night
001–128
END
ENTER
[626] Overflow Time
Incoming Call
Overflow Time
[626]
Distribution
Group No.
001–128
END
(1–125)×10 s
ENTER
ENTER
[627] Destination When All Busy
Incoming Call
Time No.
1 Day/2 Lunch/
3 Break/4 Night
Destination No.
[627]
Distribution
Group No.
001–128
Max. 32 digits
ENTER
END
ENTER
[628] Queuing Call Capacity
Incoming Call
Distribution
Number in Queuing
[628]
END
0–30
ENTER
ENTER
Group No.
001–128
PT Programming Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[629] Queuing Hurry-up Level
Incoming Call
Distribution
Hurry-up Level
[629]
END
None/1–30
ENTER
ENTER
Group No.
001–128
[630] Queuing Time Table
Incoming Call
Distribution
Group No.
001–128
Time No.
1 Day/2 Lunch/
3 Break/4 Night
Table No.
01–64/None
[630]
ENTER
END
ENTER
[631] Sequences in Queuing Time Table
Table No.
Location No.
[631]
SELECT
None/Overflow/
Disconnect/"N" × 5 s/
Sequence "N"/OGM "N"
01–64
01–16
ENTER
* Number must be entered in the "N".
END
ENTER
[632] Maximum Number of Agents
Incoming Call
Distribution
Group No.
Number of Agents
No Limitation/01–32
[632]
END
ENTER
ENTER
001–128
[640] Extension User Groups of a Paging Group
Paging Group No.
[640]
Extn. User Group No.
SELECT
No/Yes
01–32
001–032
ENTER
END
ENTER
42
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[641] External Pagers of a Paging Group
Paging Group No.
External Pager No.
[641]
SELECT
No/Yes
01–32
1
ENTER
END
ENTER
[650] Extension User Groups of a Pickup Group
Pickup Group No.
Extn. User Group No.
[650]
SELECT
No/Yes
01–64
001–032
ENTER
END
ENTER
[660] VM Group Floating Extension Number
VM (DPT) Group No.
[660]
Extn. No.
1–5 digits
END
1
ENTER
ENTER
[680] Idle Extension Hunting Type
Hunting Group No.
[680]
SELECT
Circular/
Terminate
END
01–64
ENTER
ENTER
[681] Idle Extension Hunting Group Member
Hunting Group No.
Location No.
[681]
01–16
01–64
ENTER
Extn. No.
END
1–5 digits
ENTER
PT Programming Manual
43
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[690] PS Registration
To the PS
operation
below
PS No.
001–028
Extn. No.
1–4 digits
[690]
END
ENTER
ENTER
KX-TCA255
Press POWER
for 2 seconds.
Select
"Setting Handset".
Select
"Registration".
PIN for PS Registration
4 digits
Select
"Register H/set".
Select
"Base 1–4".
C.Tone
Note
•
Please refer to Section 2.7.7 Connecting a Cell Station to the Hybrid IP-PBX in the
Installation Manual for details about PS registration.
[691] PS Termination
PS No.
001–028
[691]
END
ENTER
ENTER
[692] Personal Identification Number (PIN) for PS Registration
PIN for PS Registration
[692]
END
4 digits
1234
ENTER
ENTER
[699] CS Status Reference
[699]
Slot No.
01, 05–06
Port No.
01–08
CS Status
Reference only
END
ENTER
44
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.10 Resource/Interface Programming
[700] External Pager Floating Extension Number
Pager No.
Extn. No.
[700]
END
(HOLD)
1–5 digits
1
ENTER
ENTER
[710] Music Source Selection for BGM
SELECT
[710]
(AUTO ANS/
END
MESSAGE)
External/Internal1/
Internal2
ENTER
ENTER
[711] Music on Hold
Music Source No.
[711]
END
Tone/BGM
ENTER
ENTER
[712] Music for Transfer
[712]
SELECT
Hold Music/
Ring back
END
ENTER
ENTER
[720] Doorphone Call Destination
[720]
Time No.
1 Day/2 Lunch/
3 Break/4 Night
Slot No.
Port No.
09
1–4
ENTER
Destination No.
END
Max. 32 digits
ENTER
[729] Doorphone Number Reference
Doorphone No.
[729]
Slot No.
Port No.
END
Reference only
09
1–4
ENTER
PT Programming Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[730] Outgoing Message (OGM) Floating Extension Number
[730]
Message No.
Extn. No.
1–5 digits
END
01–32
ENTER
ENTER
[731] Outgoing Message (OGM) Name
[731]
Message No.
Name
Max. 20 characters
END
01–32
ENTER
ENTER
[732] DISA Security Mode
[732]
SELECT
None/
Trunk/All
END
ENTER
ENTER
46
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.11 SMDR & Maintenance Programming
[800] RS-232C Parameter—New Line Code
[800]
Location
SELECT
(AUTO ANS/MESSAGE)
1
END
ENTER
ENTER
ENTER
ENTER
ENTER
CR+LF/CR
(HOLD)
[800] RS-232C Parameter—Baud Rate
[800]
Location
SELECT
2400/4800/9600/
19200/38400/57600/
115200 bps
END
END
END
END
2
ENTER
[800] RS-232C Parameter—Word Length
[800]
Location
SELECT
7/8 bits
3
ENTER
[800] RS-232C Parameter—Parity Bit
[800]
Location
SELECT
None/Mark/
Space/Even/Odd
4
ENTER
[800] RS-232C Parameter—Stop Bit Length
[800]
Location
SELECT
1 bit/2 bits
5
ENTER
ENTER
[801] External Modem Control
Command No.
[801]
END
1–5
ENTER
ENTER
[802] SMDR Page Length
[802]
Page length
END
4–99 lines
ENTER
ENTER
PT Programming Manual
47
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
[803] SMDR Skip Perforation
[803]
Skip Perforation
END
0–95 lines
ENTER
ENTER
[804] SMDR Outgoing Call Printing
[804]
SELECT
No print/Print
END
ENTER
ENTER
[805] SMDR Incoming Call Printing
[805]
SELECT
No print/Print
END
ENTER
[810] Remote Programming
[810]
ENTER
SELECT
Disable/
Enable
END
ENTER
ENTER
[812] ISDN Remote Floating Extension Number
[812]
Extn. No.
END
1–5 digits
ENTER
ENTER
48
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
2.1.12 Card Programming
[900] Slot Card Type Reference
Slot No.
01–11
Card Name
Reference only
[900]
END
(HOLD)
ENTER
[901] Slot Card Deletion
[901]
Slot No.
01–11
Delete
END
Confirming the
ENTER
ENTER
deleting operation.
To the Next Slot No.
To the Desired Slot No.
NEXT
CANCEL
[902] Slot Card Reset
[902]
Slot No.
01–11
Reset
Confirming the
END
ENTER
ENTER
resetting operation.
PT Programming Manual
49
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 PT Programming
50
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
3.2 Feature Programming References
A
Absent Message
•
Feature Guide Reference
1.17.2 Absent Message
Account Code Entry
•
Feature Guide Reference
1.5.4.3 Account Code Entry
Automatic Route Selection (ARS)
•
•
•
•
•
•
•
•
•
•
Feature Guide Reference
1.9.1 Automatic Route Selection (ARS)
C
Call Charge Services
•
•
•
•
•
Feature Guide Reference
1.22.3 Call Charge Services
Call Forwarding (FWD)
•
•
•
•
PT Programming Manual
53
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
Feature Guide Reference
1.3.1.2 Call Forwarding (FWD)
Call Hold
•
Feature Guide Reference
1.12.1 Call Hold
Call Pickup
•
Feature Guide Reference
1.4.1.3 Call Pickup
Call Transfer
•
•
•
Feature Guide Reference
1.11.1 Call Transfer
Caller ID
•
•
•
Feature Guide Reference
1.16.1 Caller ID
Calling Line Identification (CLI) Distribution
•
•
Feature Guide Reference
1.1.1.5 Calling Line Identification (CLI) Distribution
Calling Party Control (CPC) Signal Detection
•
•
Feature Guide Reference
1.10.10 Calling Party Control (CPC) Signal Detection
Calling/Connected Line Identification Presentation (CLIP/COLP)
•
•
•
Feature Guide Reference
1.19.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
54
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected
Name Identification Presentation (CNIP/CONP)—by QSIG
•
•
Feature Guide Reference
1.26.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/
Connected Name Identification Presentation (CNIP/CONP)—by QSIG
Class of Service (COS)
•
•
Feature Guide Reference
2.2.1 Class of Service (COS)
D
Dial Type Selection
•
•
•
Feature Guide Reference
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
•
•
Feature Guide Reference
1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
•
•
•
•
Feature Guide Reference
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
•
•
•
•
•
•
•
PT Programming Manual
55
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
•
•
•
Feature Guide Reference
1.15.6 Direct Inward System Access (DISA)
Display Information
•
•
Feature Guide Reference
1.18.4 Display Information
Do Not Disturb (DND)
•
Feature Guide Reference
1.3.1.3 Do Not Disturb (DND)
Door Open
•
•
Feature Guide Reference
1.15.2 Door Open
Doorphone Call
•
•
Feature Guide Reference
1.15.1 Doorphone Call
E
Emergency Call
•
Feature Guide Reference
1.5.4.2 Emergency Call
Executive Busy Override
•
•
Feature Guide Reference
1.7.2 Executive Busy Override
Extension Dial Lock
Feature Guide Reference
•
56
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
1.8.3 Extension Dial Lock
Extension Personal Identification Number (PIN)
•
Feature Guide Reference
1.24.1 Extension Personal Identification Number (PIN)
Extension Port Configuration
•
•
Feature Guide Reference
2.1.1 Extension Port Configuration
External Feature Access (EFA)
•
Feature Guide Reference
1.10.7 External Feature Access (EFA)
F
Flash/Recall/Terminate
•
Feature Guide Reference
1.10.6 Flash/Recall/Terminate
Flexible Numbering/Fixed Numbering
•
Feature Guide Reference
2.3.6 Flexible Numbering/Fixed Numbering
Floating Extension
•
•
•
•
•
•
Feature Guide Reference
2.3.7 Floating Extension
G
Group Call Distribution
•
•
PT Programming Manual
57
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
•
Feature Guide Reference
1.2.2.2 Group Call Distribution
H
Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
•
Feature Guide Reference
1.5.4.7 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
Hot Line
•
Feature Guide Reference
1.6.1.6 Hot Line
I
Idle Extension Hunting
•
•
Feature Guide Reference
1.2.1 Idle Extension Hunting
Incoming Call Distribution Group Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Feature Guide Reference
1.2.2 Incoming Call Distribution Group Features
Integrated Services Digital Network (ISDN)
•
•
•
58
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
•
•
Feature Guide Reference
1.19.1 Integrated Services Digital Network (ISDN)
Intercept Routing
•
•
•
Feature Guide Reference
1.1.1.6 Intercept Routing
Intercept Routing—No Destination
•
Feature Guide Reference
1.1.1.7 Intercept Routing—No Destination
Intercom Call
•
•
Feature Guide Reference
1.5.3 Intercom Call
Internal Call Features
•
Feature Guide Reference
1.1.2 Internal Call Features
L
Last Number Redial
•
•
Feature Guide Reference
1.6.1.3 Last Number Redial
Line Preference—Outgoing
•
•
Feature Guide Reference
1.5.5.2 Line Preference—Outgoing
PT Programming Manual
59
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
M
Manager Features
•
•
Feature Guide Reference
2.2.6 Manager Features
Multiple Subscriber Number (MSN) Ringing Service
•
•
Feature Guide Reference
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Music on Hold
•
•
Feature Guide Reference
1.12.4 Music on Hold
N
Network Direct Station Selection (NDSS)
•
Feature Guide Reference
1.26.5.1 Network Direct Station Selection (NDSS)
O
Operator Features
•
Feature Guide Reference
2.2.5 Operator Features
Outgoing Message (OGM)
•
•
Feature Guide Reference
1.15.5 Outgoing Message (OGM)
Outside Destinations in Incoming Call Distribution Group
•
•
•
•
60
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
•
Feature Guide Reference
1.2.2.3 Outside Destinations in Incoming Call Distribution Group
Overflow Feature
•
•
•
•
•
Feature Guide Reference
1.2.2.6 Overflow Feature
P
Paging
•
•
Feature Guide Reference
1.14.1 Paging
Parallelled Telephone
•
Feature Guide Reference
1.10.9 Parallelled Telephone
Pause Insertion
•
Feature Guide Reference
1.5.4.6 Pause Insertion
PC Phone/PC Console
•
Feature Guide Reference
1.28.2 PC Phone/PC Console
Portable Station (PS) Connection
•
•
•
Feature Guide Reference
1.21.1 Portable Station (PS) Connection
PS Directory
•
PT Programming Manual
61
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
•
•
Feature Guide Reference
1.21.3 PS Directory
PS Ring Group
•
Feature Guide Reference
1.21.2 PS Ring Group
PS Roaming by Network ICD Group
•
•
•
Feature Guide Reference
1.26.6.1 PS Roaming by Network ICD Group
PT Programming
•
•
Feature Guide Reference
2.3.2 PT Programming
Q
Queuing Feature
•
•
•
•
•
Feature Guide Reference
1.2.2.4 Queuing Feature
R
Reverse Circuit
•
Feature Guide Reference
1.5.4.5 Reverse Circuit
S
Software Upgrading
•
62
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
Feature Guide Reference
2.3.8 Software Upgrading
Special Carrier Access Code
•
Feature Guide Reference
1.5.4.8 Special Carrier Access Code
Speed Dialling—Personal/System
•
•
•
Feature Guide Reference
1.6.1.4 Speed Dialling—Personal/System
Station Message Detail Recording (SMDR)
•
•
•
•
•
•
•
•
•
Feature Guide Reference
1.22.1 Station Message Detail Recording (SMDR)
T
Tenant Service
•
•
•
•
Feature Guide Reference
2.2.3 Tenant Service
TIE Line Service
•
•
Feature Guide Reference
1.26.1 TIE Line Service
PT Programming Manual
63
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
Time Service
•
•
•
Feature Guide Reference
2.2.4 Time Service
Toll Restriction (TRS)/Call Barring (Barring)
•
•
•
•
•
•
Feature Guide Reference
1.8.1 Toll Restriction (TRS)/Call Barring (Barring)
Trunk Access
•
•
•
•
Feature Guide Reference
1.5.5.3 Trunk Access
Trunk Answer From Any Station (TAFAS)
•
Feature Guide Reference
1.15.3 Trunk Answer From Any Station (TAFAS)
Trunk Call Limitation
•
•
•
Feature Guide Reference
1.10.8 Trunk Call Limitation
V
Verification Code Entry
•
•
•
•
Feature Guide Reference
64
PT Programming Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Feature Programming References
1.8.6 Verification Code Entry
Virtual PS
•
Feature Guide Reference
1.21.6 Virtual PS
Voice Mail (VM) Group
•
•
Feature Guide Reference
1.20.1 Voice Mail (VM) Group
Voice Mail DPT (Digital) Integration
•
Feature Guide Reference
1.20.3 Voice Mail DPT (Digital) Integration
W
Walking COS
•
Feature Guide Reference
1.8.5 Walking COS
Walking Extension
•
Feature Guide Reference
1.24.3 Walking Extension
Wireless XDP Parallel Mode
•
Feature Guide Reference
1.21.5 Wireless XDP Parallel Mode
PT Programming Manual
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Panasonic Communications Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use
only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX3965YA KK0306TK1047
Download from Www.Somanuals.com. All Manuals Search And Download.
|