AVIAh
Portable Multimedia Player/Recorder
User’s Manual
Thank you for purchasing the Ovideon AVIAh Portable Multimedia Player/Recorder/TV.
Read this manual carefully before using the AVIAh. A good understanding of its features and operation
will allow you to achieve optimum performance and enjoyment.
Please keep this manual for future reference.
The content of this manual is furnished for informational use only; it is subject to change
without notice, and should not be construed as a commitment by Ovideon Inc..
Ovideon assumes no responsibility or liability for any errors or inaccuracies that may appear in this
document.
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Player
Voice Recorder
The AVIAh offers you the ultimate in video media
flexibility. You can store and play video files such as
DIVX, XVID, WMV9, AVI and ASF. Its not enough just
to take your music with you, with the AVIAh you can
take your videos with you too. Now that’s convenience!
The integrated Voice recorder allows you to record
meetings and conversations or just to take notes. It’s a
great way to remember your next appointment or to
create a to-do and shopping list.
Big Screen Playback
TV/Cable Ready Tuner and Recorder
Connect the included telescoping antenna or attach a
cable line to your AVIAh and tune in your favorite
shows or sports programs. You can watch your favorite
programs and record them! While you’re at it, you can
also rewind and fast forward through them too!
For the ultimate in viewing pleasure the integrated
video output of the AVIAh allows you to connect it to
your big screen TV or projector. Any video or music file
recorded on the AVIAh can be watched on your big
screen display or heard on your stereo system.
Real Time Recorder
Record your family videos, your company training
videos or connect directly to your video camera for
some real time recording. The integrated audio/video
input and recording capability of the AVIAH allows you
to connect to your DVD or VCR so you can take your
favorite video recordings with you wherever you go.
File Storage and Back up
Since the AVIAh acts as a mass storage device you
can download or back up virtually any file to the internal
1" subminiature HDD. You can carry your files
wherever you go and have them ready whenever you
need them.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
2~3
7
What is included in the box?
Controls and Connections
Important Product Safety Instructions
8
9~11
Before Using
How to turn the power ON/OFF?
12
How do I connect to my computer and how do I download files?
Can I format the AVIAh internal Hard Drive?
13
14
My Portable Media Player is displaying a “There is not enough HDD space” message.
Is it possible to see files other than multimedia files in HDD?
Can I connect the AVIAh to external A/V equipment?
How do I connect the antenna and cable?
15~16
17
18
19
Are there any precautions when using the battery?
What are the functions of each button?
20
21~22
4
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate each Mode
When Watching TV [NTSC System]
When Watching TV [PAL System]
When Listening to the Radio [Option]
When Displaying an Image File
Can I change the Background Images of the On Screen Display?
When Playing a Moving Picture File
When Playing Audio Files
Does the Portable Media Player have an Audio Equalizer?
Can I create Playlists?
When Recording Voice
23~24
25~28
29~30
31~32
33
34~36
37~39
40
41~43
44~45
How to perform System Set Up
46~47
48
Picture Adjustment
System Setup
Setting Other Functions
49
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
50
51
52
Installing Windows 98 SE/ME Driver
Upgrading Firmware
Installing TransC Software on your PC
Using AVIAh TransC
53~58
54
*
AVIAh TransC Conversion Program
Product Specifications & Features
Product Inquiry & Customer Service
59
60-61
To ask for our service through the Internet
Notices
FCC Information
Trouble Shooting
PRODUCT WARRANTY
Limited Warranty
62
63
64-65
6
Download from Www.Somanuals.com. All Manuals Search And Download.
AVIAh Portable Recorder
Earphone / Ferrite Core
DC Adapter
AVIAh
Installation CD
Power Supply Cord
Portable Multimedia Recorder
Audio / Video In/Out Cable
Indoor Antenna Cable /
Ferrite Core
VOL
CH
Carrying Case
Detachable Antenna for
Outdoor
Battery
Accessories are subject to change
without notice.
USB Cable
User s manual
When connecting earphone / core
- Refer to the antenna connection
diagram located on page 16
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front/Rear
AVIAh
OLED
SCREEN
JOG BUTTON
Portable Multimedia Recorder
BATTERY
CHANNEL
UP/DOWN
VOLUME
UP/DOWN
VOL
CH
Left/Right Side
Top/Bottom Side
TV ANT
EARPHONE ON/OFF HOLD
MIC
BUILT-IN
MICROPHONE
REC
USB DC IN
DISP
MODE
AV IN/OUT
DC IN 4.0V
USB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow and obey all warnings and instructions. For your safety, please read all of the safety
and operating instructions before you operate this product and keep this booklet for future
reference.
CAUTION!
Do not attempt to open and service this product yourself. Doing so may further damage the product.
If any service is required, please contact the location of purchase or our website (www.ovideon.com).
WARNING!
Copying CD, music, video, image files for sales purpose violates the copyright law.
Copying all or part of data, art, presentation protected by copyright law may require authorization from
the owner of the copyright; hence you should be aware of the all laws governing copyright in your
country.
Other Warnings & Precautions
Avoid exposure to direct
sunlight, and do not place this
unit near any heat sources
such as radiators, heat
registers, stoves, etc..
Do not place this unit near water
or moisture for extended periods
of time.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The plug should fit into the
power outlet completely.
When using a power strip, do
not overload it by connecting
too many devices.
When unplugging the power
supply cord, be sure to grasp the
power supply plug firmly and
remove.
Do not place the power supply
cord near heat sources.
When the power plug pins
are contaminated with dirt;
wipe them clean before
plugging into the outlet.
Do not touch the power supply
cord when your hands are wet.
When water or foreign material
gets inside the unit, first turn off
the power switch on the unit,
remove the battery and then call
your Purchase location for
service.
When smoke or strange
smells occur, or foreign
material is inserted, turn off
the power, then call your
Purchase location.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
When thunder or lightening
occurs, do not watch TV.
Do not drop or strike the unit.
When cleaning this unit, wipe with
soft clean cloth. Do not use wet
cloth, polishing agent, benzene,
wax, or alcohol.
Only use specified batteries.
Do not substitute.
Do not put this unit into heating
appliances such as a microwave
or oven.
Do not damage the battery by
sharp objects (awl, knife). Do not
short circuit the battery contacts.
Keep batteries away from
children. Do not allow children
to put the batteries in their
mouths.
Do not use this unit while driving or
walking. (You may cause or be
involved in an accident).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to turn the power ON/OFF?
Pull and hold the Sliding Switch to the
Green lamp will flicker.
ON/OFF position for 3 seconds, then
release.
The green lamp will flicker and the
AVIAh will turn on.
After boot up, the home page will appear.
To turn the power ON/OFF, pull and hold the Sliding Switch to the ON/OFF position, then release.
If using the AC adapter; turn the power ON/OFF using the Sliding ON/OFF Switch AFTER the green lamp turns off.
If the system will not operate:
- Pull the Sliding Switch to the ON/OFF position for approximately 10 seconds, then release. The system will restart
automatically.
If the system still does not work, disconnect the batteries and the AC adapter. Reconnect the power supplies and try again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I connect to my computer and how do I download files?
When connecting this unit to your computer for an extended period of time, check that the battery has a sufficient charge.
If the battery is running low please connect the AC adapter immediately to avoid any loss of data.
(E.g.) WINDOW XP
Select a folder or file to be copied from "My
Computer" or "File Search".
Drag and drop the file into the AVIAh HDD. You
can create your own folders as desired.
Connect the AVIAh to
your computer with the
USB cable.
After connecting, the PC recognizes
AVIAh as new hardware.
The AVIAh will appear as a logical
HDD on your PC.
After finishing all downloads,
execute
"Hardware
Safe
Removal". This safely disconnects
the AVIAh from your PC. After
executing "Hardware Safe
Removal", detach the USB cable.
Downloading will be carried out through the USB cable.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Can I format the AVIAh internal Hard Drive?
Yes, but it is not necessary to do so. The AVIAh comes ready to use. If you desire to format the HDD then first backup all of
the files contained in the "Systems Folder" of the AVIAh before formatting the hard drive (HDD) of this unit. After formatting
the HDD, make a "System Folder" on the AVIAh HDD and copy the back up files into the folder.
This message will appear on the
screen of the AVIAh when
connected to the PC via USB.
Connect the AVIAh to your PC
with the supplied USB cable.
Press " OK ".
When formatting, select file
system as FAT for 2.5GB hard
disk AVIAh, and FAT32 for 5GB
AVIAh.
Right Click on the AVIAh folder
Select the Capacity and File
and select " FORMAT ".
System, then press " START ".
14
Download from Www.Somanuals.com. All Manuals Search And Download.
My Portable Media Player is displaying a "There is not enough HDD space" message.
My battery ran out while I was connected to my PC via the USB cable and now my Portable
Media Player will not boot up.
What can I do to fix this problem?
If you encounter a condition as described above there may be file errors or file access errors on the Portable Media Players
Hard Drive. To check and fix any file errors please follow the procedure outlined below.
Please connect Portable Media Player to your PC via the supplied USB cable. The Portable Media Player will be recognized
as a logical Hard Drive on you PC. See example below.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
In order to check the file integrity of the Players
HDD and to fix any errors from Windows Start
Menu go to Start>RUN. In the RUN prompt window
type ‘CMD’ and hit the ‘ENTER’ Key.
After performing CHKDSK on the Portable Media
Player and fixing any file issues restart your
Portable Media Player. The Player should function
normally.
The DOS prompt will open.
Performing CHKDSK regularly on any HDD device
will help maintain good functionality.
In the DOS prompt type ‘CHKDSK f: /f’ and press
the ENTER key.
f: is the Portable Media Players Drive Letter (This
drive letter may be different on your PC)
/f: tells Windows to fix any HDD problems
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Is it possible to see files other than multimedia files in HDD?
Yes, files stored in the hard disk other than video, audio, JPEG, voice recording can be viewed by pressing the " Mode " Button
and selecting the " ETC.FILE " Icon.
MODE
The jog button to
direction is pushed,
You can read text file.
Various types of files
can be shown in the
Search File windows.
The AVIAh has the capability of displaying Text (.txt) files. Just download your text files into the AVIAh and use the * ETC file
button from the Main Start Up screen to access the file. Basically any document that is converted to or is originally a .txt file can
be viewed.
Highlight the Text file you would like to see and push the Joystick to the right to display the text. If the text file is long, pushing
the Joystick to the right again will display the next page of the document. Pushing the Joystick to the left will display the
previous page. In addition, the text will be presented with word wrap functionality.
In order to get out of the Text File View Mode push down on the Joy stick.
The AVIAh will also automatically recognize UTF-8/UNICODE/UNICODE-BE text files.
However, word wrap is not supported for UTF-8/UNICODE/UNICODE-BE, Korean, Japanese or Chinese text.
Deleting a large file may take a longer than usual period of time. On occasion, during the deletion of a file the AVIAh may
appear to have paused or stopped responding. This is temporary; after the file deletion has been completed, normal operation
will resume.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Can I connect the AVIAh to external A/V equipment?
Yes. You may connect other Video and Audio devices such as a TV receiver, DSS, or VCR to the AV IN Connector.
MODE
Settings for external input are referred to Page 49. (When recording)
To record while watching a program, press the REC button. To end the recording session, press the REC button again.
The filename will vary for a recorded file depending on the external input signal.
1. A Video signal will be saved as VID_0000.ASF. Adding another video recording will increase the file number by one. E.g.
VID_00001.ASF.
2. A TV signal, when recording via the antenna, will be saved as A0000000.ASF, whereas C0000000.ASF is for cable
recordings. Additional recordings will increase the file number by one.
(The 3-digit numbers immediately following the A and/or C in the file name will denote the channel that was recorded.
Example: C0350002.ASF means that the recording was made from Cable Channel 35 and is the second recording.)
You may select to record in ASF or JPG file format in the system set-up menu of the Other Function sub-menu (Page 38). If
for example the REC button is pressed while watching TV and the JPG recording format is selected, a frame of the incoming
signal will be captured and will be saved as a JPG file.
When viewing a file stored in the AVIAh on any external AV equipment (TV, monitor) (OUT)
Be sure to use the cable supplied with this unit.
Settings for output through the OUT terminal is referred to on Page 37
OLED Display, Output Color System
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I connect the antenna and cable?
To connect cable antenna when viewing this unit.
To connect the telescoping antenna when viewing this unit.
Lead axial line 75
Wall Connecting
Terminal
Connect TV Indoor Antenna/Cable and the RF line from
the Antenna or Cable (Terminal Lead axial line 75 ).
Watch TV by installing the TV outdoor
antenna/telescoping antenna.
To connect the indoor antenna/cable with the Core.
Installing a ferrite core around the indoor antenna/cable
will generally remove any noise in the picture.
Open the Core, insert the antenna wire,
and close the Core.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Are there any precautions when using the battery?
Yes. When using this unit, the current battery charge will be displayed on the screen. If the battery charge is insufficient, the
battery indicator will flicker, and the power will automatically turn off in 1 or 2 minutes.
The battery recharge process may be checked by looking at the battery indicator.
When using this
unit, the current
The battery is fully charged
when the power cord image is
displayed, when the battery
and DC power are connected.
battery
charge
status is displayed.
- Charging with the AC adapter.
- Replacing the battery.
When the battery indicator icon flickers, this unit may not operate at its full potential. Turn OFF the unit and replace the battery
with a fully charged battery or use the AC adapter as your power source.
If you do not plan to use the unit for a prolonged period of time, you should remove the battery from the unit as a precaution
against the possibility of over discharging the battery.
Always dispose of spent batteries properly. Never throw batteries in a fire, as they could explode.
Always turn the unit OFF with the Sliding Switch BEFORE replacing the battery. You could damage the hard drive if you remove
the battery during video or audio playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
What are the functions of each button?
VOL +/- Button
MODE Button
This button adjusts the earphone volume level.
TV (Option)
ETC.FILE
SLIDE SHOW
AV
VIDEO PLAY
VOICE REC will be viewed in
RADIO (Option)
SYS.SETUP
AUDIO PLAY
MODE
VOL
sequence.
-
Depending on product options, the number of menu
items displayed on the screen may vary.
POWER Button
DISP Button
This button is a sliding type switch for Power ON/OFF.
This switch is also used to reset the system. Just pull
the switch to the ON/OFF position for approximately 10
seconds, then release. The system will reset
automatically.
This button displays the present status for various
modes.
While playing back MP3/Voice, if you set Repeat
Menu(D/R) to ON, the next track will be played back.
DISP
CH +/- Button (* Fn +/-)
REC Button
TV/AV signal can be saved as a moving picture file,
and/or a desired image can be captured and saved as a
JPG formatted file. In VOICE REC, voice can be
recorded via a built-in microphone.
While in TV mode / Radio mode
Channel Up/Down can be selected.
REC
While in VIDEO PLAY / AUDIO PLAY mode
While in Playback Mode, Repeat Menu and Loop
Repeat Function can be selected.
CH
While not in Playback Mode, File Deleting Function
can be selected with CH+ Button.
HOLD Button
* Depending on Option, " CH " can be indicated as " Fn ".
This button is used to prevent other keys from operating.
It locks the keys to prevent accidental operation.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY/PAUSE Button
While in VIDEO PLAY / AUDIO PLAY mode
Playback/Pause Function can be selected.
While in Menu mode
Cursor Key (
) is used.
REW Button
While in VIDEO PLAY / AUDIO PLAY mode
OK Button
Rewinding (x2/4/8/16) can be selected.
While in Menu mode
This button is used to select the Menu for various modes.
Data adjusting (
) can be done.
While in VIDEO PLAY/AUDIO PLAY/SLIDE SHOW/
VOICE REC mode
While in SYS.SETUP
EXIT Key is used to exit the current menu.
You can play or preview the selected contents.
FF Button
Folder and file will be displayed.
While in VIDEO PLAY / AUDIO PLAY mode
Forwarding (x2/4/8/16) can be selected.
After locating the cursor on a desired file, pressing
(
) Button will allow Full-screen Play Function to
STOP Button
operate.
While in VIDEO PLAY / AUDIO PLAY mode
This button is used to stop playback of a file.
While in Menu mode
Data adjusting (
) can be done.
While in Menu mode
While in SYS.SETUP mode
This button is used to select the sub-menu.
Cursor Key (
) is used.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
When Watching TV (NTSC System)
If you want to watch TV outdoors, use the telescoping antenna. The AVIAh reception quality will vary according to the proximity
of the broadcast station. The further away you are from a broadcast station the weaker your reception will be. For watching TV
indoors, connect the antenna/cable to the antenna terminal.
MODE
- Auto Channel Setup [ NTSC ]
This function is to search the receiving signal automatically, and save it into memory.
Press the Button.
Select the Icon.
Select Auto program.
Select Area.
When setting the Antenna Mode, you can
either select Indoors (telescoping antenna)
or Outdoors (RF Antenna/Cable).
After completing the Save, select the desired
channel by CH +/-.
Channel Search starts.
Select "Start" in Auto program.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
- Manual Channel Setup [ NTSC ]
This function allows you to delete the channel saved by the Auto program, and allows you to manually select and
save the channels.
Press the
Button.
Select the
Icon.
Select Manual program.
Select Area.
The antenna for the indoors setting can receive cable broadcast signals,
whereas the outdoors setting can only receive public broadcasting signal.
While in the Area line item, select indoors or outdoors.
After saving, select a desired channel by pressing CH +/-.
Adjust settings after selecting
a desired mode.
To modify Indoors and Outdoors Mode while watching TV, pressing CH +/-
Button repeatedly will display antenna modes (Indoors, Outdoors)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
When Watching TV (PAL System)
If you want to watch TV outdoors, use the detachable telescoping antenna when there is a strong broadcast signal, and for
watching TV indoors, connect the cable signal to the antenna terminal. The cable tuner can receive analog signals; it will not
accept digital cable.
MODE
- Auto Channel Setup [ PAL, SECAM ]
This function is to search the receiving signal automatically, and save it into memory.
Press the
Button.
Select the
Icon.
Select Auto program.
Select Area.
Area can be done in 4 modes.
(ANT1, ANT2, ANT3, ANT4)
There is a possibility for local set up
After completing save, select the desired
channel by CH +/-.
Channel Search starts.
Select "Start" in Auto program.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Use the Jog button (
or
direction) to select " Storage from ".
2. Push the Jog button to
program number.
direction or
direction. Select the beginning
1. Use the Jog button (
or
direction) to select " System ".
2. Push the Jog button to
TV System modes.
direction or
direction to change a TV System.
BG : PAL B/G, SECAM B/G (Asia/New Zealand/Europe/East Europe)
: PAL I/II (U.K./leland/Hong Kong/South Africa)
DK : PAL D/K, SECAM D/K (East Europe/China/Africa/Russia)
I
1. Use the Jog button (
or
direction) to select " Color System ".
direction to change a color System.
2. Push the Jog button to
Color System modes.
PAL, SECAM, NTSC
direction or
After setting " Storage from ", " System, Color System " above, Select " Start " then Push the Jog button direction to
begin the Auto Program.
- All receivable stations are stored.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
- Manual Channel Setup [ PAL, SECAM ]
This function allows you to delete the channel saved by the Auto Program, and select the channels manually and save them.
Press the
Button.
Select the
Icon.
Select Manual program.
Select Area.
While in Area, select ANT1, ANT2, ANT3, ANT4.
After saving, select a desired channel by CH +/-.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Normally, fine tuning is only necessary if the reception is poor.
1. Use the Jog button (
or
direction) to select " Fine ".
direction to fine tune for the best
2. Push the Jog button to
direction or
picture and sound on the Fine pull-down menu.
3. Press the OK button.
1. Use the Jog button (
or
direction) to select " Search ".
direction to commence searching on
2. Push the Jog button to
direction or
the Search pull-down menu.
If a station is found the search will stop.
3. Press the OK button to store it.
1. Use the Jog button (
2. Push the Jog button to
3. Press the OK button.
or
direction) to select " Skip ".
direction or
direction to select " On " or " Off ".
4. When the Skip setting is " On ", it means that you will be unable to find the
skipped channel using the CH+/- button during normal TV viewing.
After setting " Storage from ", " System ", "Color System " above; Select " Start " then Push the Jog button
direction to
begin the Auto Program.
- All receivable stations will be stored.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
When Listening to the Radio (Option)
If you want to listen to the Radio outdoors, use the detachable telescoping antenna where the reception sensitivity is good.
MODE
- Auto Channel Setup
This setup will search receiving signals automatically and save them to the unit’s memory.
Press the
Button.
Select the
Icon.
Select Auto program.
Select Area.
Area can be done in 4 modes.
(ANT1, ANT2, ANT3, ANT4)
There is a possibility for local set up.
The System can be set as global radio
system or Japanese radio system.
(EU, USA, KOREA, JAPAN)
Pushing the jog button to direction when
starting Auto Channel Setup, the signal will
be stored automatically.
Channel Search starts.
Select " Start " in Auto program.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
- Manual Channel Setup
This method can be used to erase the channel saved by the Auto Program, or catch and save the station manually.
Press the
Button.
Select the
Icon.
Select Manual program.
Select Area.
- If you are listening to the radio after setting the radio
channel, a radio menu will be displayed to select a
desired channel.
Adjust settings after selecting
a desired mode.
Area can be done in 4 modes. (ANT1, ANT2, ANT3, ANT4).
After saving, select a desired channel by CH +/-.
When there is a serious noise in the stereo signal, setting Forced Mono or Stereo Noise Cancel will allow you to
listen to a cleaner signal
30
Download from Www.Somanuals.com. All Manuals Search And Download.
When Displaying an Image File
Picture files stored in the AVIAh can be displayed individually or as part of a slide show.
MODE
- When Viewing Image Files
If the OK Button is pressed or the jog button to
pushed, the current image file will be displayed in full screen.
direction is
After moving to a desired file, pressing the OK Button will
allow you to preview in a small screen in the upper left side.
Repeatedly pressing the DISP Button will provide information on the filename of the displayed image .
When deleting an image file without previewing it first a confirmation warning question appears. If the CH+ Button is pressed,
the following warning question appears " Do you want to delete? " If you select " YES ", and you press the OK Button, the
corresponding file will be erased.
While displaying a picture in the Picture View Mode pressing down on the Joystick button will allow you to zoom in on the
picture. You can zoom in 2X or 4X. Pushing the button once will zoom in 2X. Pushing the Joystick button again will zoom in 4X.
While zoomed in on a picture you can also pan across the picture by using the Joystick.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
- When Viewing an Image File with the Slide Show Function
MODE
If the OK Button is pressed twice,
The Menu will disappear and the
slide show function will run.
Press the
Button.
Select the
Icon.
After selecting the Slide show time, adjust the Display Time.
(None, 2, 4, 6, 8, 10, 15, 30 seconds can be selected.)
- When Viewing a Slide Show; the Jog Button:
If the Button is not pressed while
in ll(Pause) status, the Slide Show
will resume within 30 seconds.
Viewing Previous File
Viewing Next File
Zoom In (X2, X4)
Slide Show Termination
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Can I change the Background Images of the On Screen Display?
You can download a new image of your choice in .JPG format and use it as the background for the On Screen Display.
1. Save your JPG file of Choice to the SystemFolder of the Portable Media Player. At this time you can save only two .JPG files
to the SystemFolder.
2. When you save them, the file names should be wall.jpg and window.jpg.
3. wall.jpg is shown as a background when you push the mode button. It is also the background shown in the main menu.
window.jpg is shown as a background in Video, Audio, Slide Show, REC and ETC file mode.
If you do not want to have any background images, please delete the image files in System Folder or change the file name of
wall.jpg and window.jpg to some other name.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
When Playing a Moving Picture File
Moving pictures stored in the AVIAH can be viewed. The AVIAH can play many different types of Moving picture files including
MPEG4, DIVX, XVID, AVI, ASF and WMV9.
MODE
- Playing a Moving Picture file
After moving to a desired file, pressing the OK
Button will allow you to preview the file in a small
screen in the upper left side.
If the OK Button is pressed or the jog button to
direction is pushed, the current video will be
displayed in full screen.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
- To pause play: Push the jog button to
direction.
- To resume playback: Push the jog button to
direction.
or
- To setup playback speed: Push the jog button to
direction. ( x2, x4, x8, x16, x32)
When deleting a video file without previewing it first a confirmation warning question appears. If the CH+ Button is pressed,
the following warning question appears " Do you want to delete? " If you select " YES ", and press the OK Button, the
corresponding file will be erased.
Larger files take longer to delete.
When deleting moving picture files, if there is subtitle data, by pressing REC button to select one of
Korean/Chinese/Japanese/… to decode property, so if you select Japanese, you can decode the subtitle file in Japan. In
case of English subtitle file, there is no need to press REC button to select one of Korean/Chinese/… format to decode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
- When Pressing the CH+ (*Fn+) Button
While Playing a Moving Picture File
- When Pressing the CH- (*Fn-) Button
While Playing a Moving Picture File
Loop Repeat Function is not used.
The file being played runs once, then stops.
The file being played will be repeated.
Pressing CH- Button while a moving picture file is
being played will setup the beginning of a Loop
Repeat.
All the files in the folder will be played repeatedly.
Files to be played will be selected randomly and played.
After the above
icon is displayed, if you want
to setup the end of a Loop Repeat, press CH-Button
once more, then the specified loop will be played
back repeatedly.
Depending on the type of moving picture files, the above Loop Repeat Function may not be available.
While playing a Video file, pressing down on the Joystick button will allow you to zoom in on the Video.
You can zoom in 2X or 4X. Pushing the button once will zoom in 2X. Pushing the Joystick button again will zoom in 4X.
While zoomed in on the Video you can also pan across it by using the Joystick.
Push Joystick button to
while the video is playing back to pause the moving picture. When you push the Joystick
button to , you can advance the video frame by frame.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
When Playing Audio Files
You can enjoy music files stored in the AVIAh.
MODE
- Playing an Audio File (MP3 or WMA9 files)
Push the jog button
to the direction.
As an audio file is played,
information on the selected
audio file will appear in the
upper part of the screen.
To play an audio file, highlight
the desired file.
Press OK Button.
Will be played back while Directory
Menu is displayed.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
- To pause play: Push the jog button to the
direction.
direction.
- To resume playback: Push the jog button to the
When deleting a music file without previewing it first a confirmation warning question appears. If the CH+ Button is
pressed, the following warning question appears " Do you want to delete? " If you select " YES ", and press the OK
Button, the corresponding file will be erased.
In the case of an MP3 file : If the OK Button is pressed during playback, another audio file can be selected without
stopping the music being played.
In the case of a WMA9 file : During play back, another audio file can not be selected.
While in the System Setup menu find the OLED Display On/Off menu item. Activating the OLED "Off" menu item will turn
off the OLED the next time you activate an audio file for playback. The OLED will continue to stay turned off even if you
push the Volume Up/Down or Display buttons. This allows you to play and navigate through audio files without using the
OLED screen thus, conserving battery life.
Note 1: The Volume up/down buttons will continue to function normally.
Note 2: Pushing the Display button will allow you to skip through audio files without activating the OLED screen.
In addition, as an alternative method, you can force the OLED to turn off by pushing and holding the Display Button for 5
seconds. This will temporarily disable the OLED screen. When you push any button the OLED screen will turn on again.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
- When Pressing the CH- (*Fn-) Button
While Playing an Audio File
- When Pressing the CH+ (*Fn+) Button
While Playing an Audio File
Loop Repeat Function is not used.
The file being played runs once, then stops.
The file being played will be repeated.
Pressing CH- Button while Audio file is played will
setup the beginning of a Loop Repeat.
All the files in the folder will be played repeatedly.
Files to be played will be selected randomly and played.
After the above
icon is displayed,
if you want to setup the end of a Loop Repeat, press
CH- Button once more, then the specified loop will
be played back repeatedly.
Depending on audio content, the above Loop Repeat Function may not be available.
If there are audio file A.mp3, and A.txt file in the same folder together, lyrics of the song can be displayed by using OK button
after audio file playback. In this mode, FF/RW button can be used for page Up/Down function. If you repress OK button,
Audio playback mode will be shown on screen.
By pressing REC button to select one of Korean/Chinese/Japanese/... to decode properly, ID3 information of MP3 in China
also can be decoded in Chinese properly. In case of English ID3 information, there is no need to press REC button to select
one of Korean/Chinese/Japanese/... format to decode.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Does the Portable Media Player have an Audio Equalizer?
1. This Portable Media Players features an automatic/selectable equalizer that allows
you to set the EQ according to the Genre of the music file. In the Automatic mode
the EQ is automatically set by the Genre information contained in the ID3
information of the music file. Example: If the Genre of a music file is "Rock" the
Player will automatically select the "Rock" EQ.
2. While a music file is playing you can also select the EQ manually. As the file is
playing push the REC button and the EQ selection will be displayed. Pushing the
REC button repeatedly will cycle through the following EQ List: Off–Auto-Rock-Rap-
Grunge-Metal-Dance–Techno–Country-Jazz-Acoustic-Folk-NewAge-Classic-Blues-
Reggae-Opera-Swing-Voice–Ultra Bass
3. The EQ cannot be accessed while in the ID3 View Mode
4. You can also select the EQ while in the Playlist Mode by pushing the REC button as described previously.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Can I create Playlists?
1. The AVIAh allows you to create playlists in two different ways. A playlist can be created internally on the unit, or by using
Windows Media Player.
2. Playlists can be created using mixed file formats. You can create a playlist that incorporates Video, Audio as well as Picture
files. A maximum of 500 files can be added to the playlist.
3. What is the procedure for creating a playlist internally on the player?
a. Highlight an Audio, Video or Picture file and push the CHANNEL- button.
b. A " Do you want to add?" message will appear. Select "Yes" with the joystick and
the file will be added to the playlist.
c. Once the files are added the player will enter the playlist mode and display all the
files contained in the playlist
d. To exit the playlist push the joystick to the left
e. To add another file to the playlist, repeat the above procedure.
4. Can I add more than one file at a time?
a. Yes, it is possible to add more than one file at a time. Please follow the procedure
outlined below.
1. Access the folder containing the files you would like to add.
2. Highlight the folder (Folder with the return arrow pictured on it) located at the top
of the file list and push the CHANNEL – button.
i. A " Do you want to add?" message will appear. Select "Yes" with the joystick
and the files in the folder will be added to the playlist.
ii. Once the files are added the player will enter the playlist mode and display
all the files contained in the playlist
iii. To exit the playlist push the joystick to the left
iv. To add another set of files to the playlist repeat the above procedure.
5. How do I access the playlist?
a. Highlight any folder (Except for the return folder) and push the CHANNEL- button. The playlist will be displayed.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
6. How do I delete files from the playlist?
a. Enter the Playlist Mode as described above
b. Highlight the file that you would like to delete from the playlist and push the CHANNEL + button.
c. A " Do you want to delete?" message will be displayed. Selecting "Yes" will remove the selected file from the playlist.
d. Removing a file from the playlist does not delete it from the Hard Drive.
7. How do I save the Playlist?
a. After you add the first file to the playlist a PLAYLIST.WPL file is automatically
created in the root directory of the Hard Drive.
b. Any subsequent file additions will be automatically added to the PLAYLIST.WPL
file.
8. How do I delete a playlist?
a. From the main menu screen select the * (ETC File View Menu)
b. You will see the PLAYLIST.WPL file in the root menu
c. Highlight the PLAYLIST.WPL file and push the CHANNEL+ button
d. A " Do you want to delete?" message will appear. Select "YES" to delete the playlist file.
9. How do I play the files in my Playlist?
a. Enter the Playlist mode by highlighting a folder and pushing the CHANNEL – button
b. Highlight a file from the playlist and push the Joystick to the right. The file will begin to play.
1) While playing a file if you push the DISPLAY button the next file in the list will begin to play.
Push the Display button again to get to the next file and so on.
2) If you move the Joystick to the left the selected file will stop playing.
10. How do I get out of the Playlist mode?
1) While in the Playlist push the joystick to the left.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Can I make a Playlist by using Windows Media Player?
a. You can use Windows Media Player to view and play the playlist that you created on the Portable Media Player. Also,
you can create a playlist in Windows Media Player and save it to the portable media player.
b. Connect the Portable Media Player to your PC via USB
c. From Windows Media Player go to File>Open and select the PLAYLIST.WPL file from the root directory of the Portable
Media Player. The playlist that you created in the Portable Media Player will be displayed. Now you can activate the
playlist from Windows Media Player. The files will be played in sequence according to the playlist.
d. You can also create a playlist in Windows Media Player and save it to the Portable Media Player.
1) Create your playlist in Windows Media Player
2) Select Playlist> Save as and save the file into the root directory of the portable Media Player. Name the file
PLAYLIST.WPL
3) The .WPL file is saved as a windows text file which the Portable Media player is not able to read at this time. You
will need to open the file in Windows Notepad and re-save it as a UNICODE file. Once this is done the Portable media
player will be able to read the playlist.
4) If you created a playlist that contains a reference to files not contained on the Portable Media Player Hard Drive a
playlist error will occur. Add the referenced files to the Hard Drive of the Portable Media Player.
While in the * ETC file view Mode if you erase the PLAYLIST.WPL file from the root directory the playlist will be deleted.
In Playlist mode, only playback of the added files is available. Playback of files from the Playlist Mode does not support
RW/FF, Section repeat, ID3 view, and song text view.
You can add up to 500 files to the playlist. If you add more than 500 files the player will only read up to the 500th file and
then go back to the first item in the list. It will ignore all files after the 500th file.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
When Recording Voice
The AVIAh can be used as a voice recorder.
MODE
While in the Voice Record Mode pressing the REC button will start the voice recording process,
automatically create a file and will automatically save the file in the RecordFolder/Audio.
After pushing the REC button a "Recording Time" message will appear. Use the
Joystick to set the length of your recording. The recording length can be set in 5
minute increments; from a minimum of 5 minutes to a maximum of 24 hours.
Once the Portable Media Player reaches the end of the allotted recording time it
will automatically stop recording.
-In the "Recording Time" window if you select - - : - - , the Portable Media Player
will continue to record without any time limit.
Continues in the next page.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop recording push the REC button again.
After pushing the REC button a "Please wait a moment"
message will appear as the Portable Media Recorder
prepares to record. A " Now Recording" message will
appear once the recording process begins.
-While recording if you push the Joystick up you can PAUSE
the recording process. Pushing the Joystick up again will
resume recording.
The filename will be saved as VOICE_0000.REC. If a second etc. recording is made by pressing the REC Button, the file
number increases by one. E.g. VOICE_0001.REC, VOICE_0002.REC, ...and so on.
In the case of the REC in RADIO mode, the filename to be saved will be RADIO_0000.REC, RADIO_0001.REC,…and so
on.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
You can customize the AVIAh environment and functionality.
MODE
Picture Adjustment
After selecting the Picture Adjustment Icon, you can adjust the Picture Mode, Contrast, Brightness, Color, Sharpness and
Tint (NTSC AV only) to the levels you prefer.
- While Playing Contents File in Radio Mode
Press the
Button.
Select the
Icon.
Repeated pressing of the Button will exit
you from the System Set Up Menu.
Adjust your settings after selecting a desired mode.
(Color and Sharpness levels cannot be changed)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
- While Watching TV/AV
Press the
Button.
Select the
Icon.
Repeated pressing of the Button will exit
you from the System Set Up Menu.
Adjust settings after selecting a desired mode.
(When Input Color System is NTSC only Tint appears
on the Picture Adjustment menu.)
When adjusting images, the quick Image Adjusting Menu will be displayed, so you can view the changes being made
to the current image. At this time, if you move the jog button to or direction, other image items can be
selected. When the OK Button is pressed, you will go back to the Image Adjusting Mode.
While in Picture Mode, you can select one of four choices : Dynamic, Standard, Mild, User.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
After selecting the System Set Up Icon, you can set-up a specific feature.
Exit out of the System Menu by
repeatedly pressing the button.
Press the
Button.
Select the
Icon.
Adjust settings after selecting a desired mode.
This function is for turning the OLED Display ON/OFF. After selecting OFF, if the external device
(TV, Monitor) is connected to the AV OUT, you can enjoy your image and sound on a bigger
display.
OLED Display
Output Color System
Input Color System
This function is for changing the Output Color System (NTSC,PAL,SECAM)
This function is for changing the Input Color System (NTSC,PAL,SECAM) in AV mode (When the
Color System is PAL/SECAM, only the Input Color System item appears on the system set-up
menu.)
Full Screen
Resume
This function allows for full screen display.
This function will make the unit remember the position where the video/audio was stopped.
This function activates/deactivates subtitling on moving picture files. The subtitle file should
be in the same folder together with the moving picture file.
Caption
("same file name.smi" or "file name.sami")
This mode allows Repeat Menu Setting of video/audio content.
Off : Returns to the Menu after playing the current file.
File : Repeats playing the current file.
Dir : Plays all files in the folder in sequence.
Rand : Plays files in random order
V.P/A.P
Repeat
Sets the display time of image file (*.jpg)
Slide show time
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Other Functions
After selecting the Set-Up Icon, you can adjust set-up values.
Repeatedly pressing the Button will exit you
from the System SetUp Menu.
Press the
Button.
Select the
Icon.
Adjust settings after selecting a desired mode.
Sets the language displayed on the screen.
Language
Formats the file to be recorded.
- ASF : mode for recording moving picture.
- JPG : mode for recording still picture.
File format
REC. Mode
Selects the Quality of the moving picture recording.
Economic Normal Fine
When no button is pressed within a specified time, the OLED screen will turn off.
- 10, 20, 30, 40, 50, 60 seconds.
OLED Power save
HDD Power Management
Auto sleep
You can select ON/OFF
When selecting "ON", the power consumption for HDD is economized. The system response
will be slower then if the HDD power management is set to OFF.
In the TV/Video mode, when 3 minutes elapses without signal reception, the power will turn off
automatically.
Automatically turns power off after a fixed time.
Time range can be set from 10 to 240 minutes (None, 10, 20, 30, 60, 90, 120, 180, 240).
Sleep timer
Allows firmware upgrade by downloading the new version firmware from the Internet. Before
upgrading, be sure to check if the USB is connected and the battery charge is sufficient.
Firmware Upgrade
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Windows 98SE/ME Driver
When you connect the AVIAh to a Windows 98SE computer, it recognizes the AVIAh as hardware, and asks for a driver
installation. At that point, insert the supplied installation CD into CD-ROM drive.
2. Press the Next button.
1. Press the Next button.
3. Input the path or search for
a desired folder directly.
5. Press the FINISH Button.
4. Press the Next button.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Firmware
After copying the firmware file into the System Folder from " www.aviah.com " or " www.ovideon.com ", change the file
name to " system.rom ", and proceed as follows.
Select the
Icon.
Press the
Button.
Connect the PC and this unit with the
USB cable, then download the firmware
file to the " System Folder ".
Select the
Firmware Upgrade Mode.
Press the jog button
to the
direction.
After rebooting the system
the firmware updating
procedure will be complete.
Press the jog button to the
direction.
The downloaded firmware file should be saved in the " System Folder ".
If there is no firmware upgrade file, the following screen will appear. Connect the USB and download the filename into
" System Folder ", then start upgrading.
Please do not change the name of the "SystemFolder" located on the Portable Media Player’s Hard Disk. The Portable
Media Player expects to find all system related files in this folder. Changing the name of his folder or deleting it will cause
the Player to stop working. Treat the SystemFolder with respect and your player will work great for years to come.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing TransC Software on your PC
When the moving picture has Codec or a resolution not supported in the AVIAh, you can transcode the file by using the
TransC Software located on the Installation CD.
Click the TransC icon on the installation CD to begin installation
1. Press the Next button.
2. Press the Next button.
3. Designate where you would like the
program to be installed.
6. Press the Finish Button.
4. Press the Next button.
5. Program Installation is carried out.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AVIAh TransC
* AVIAh supports the following Codecs
Kinds of File
Video Codec
XviD, DIVX
Audio Codec Resolution
G.726
MP3
PCM
720*480
352*240
720*480
WMV9 SP
(Simple Profile)
WMV9
G.726
MP3
MS ISO MPEG-4
PCM
* When Checking Codecs (Audio/Video) stored in PC
2. Select Sound and Audio Devices.
1. Select Control Panel
3. Select Hardware, and
press Video Codec.
4. You can view Video Codec
and Audio Codec installed
in PC from the list.
If XviD Codec is not in the list, download the Integrated Codec from Internet, and install in your PC.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
* If you are not sure about whether the moving picture file is supported in AVIAh
You can check compatibility with the Codec Information Check Program.
Execute the Codec
Information Check Program.
- Moving picture with box mark :
File supported in AVIAh
- Moving picture with X mark :
File not supported in AVIAh
Although you may have Codec not supported by AVIAh, if you encode it in your PC with the TransC software, it can be
played.
Download the Codec Viewer from the Internet, then install it in your PC.
* AVIAh TransC Conversion Program
VCD/MPEG/AVI/WMV/ASF Conversion Function
dat, mpeg, mpg, avi, wmv, asf ... AVI, XviD format, WMV format, MP4 format.
RealVideo Conversion Function
rm, rv, rmvb ... AVI, XviD format, WMV format, MP4 format.
QuickTime Conversion Function
mov, qt, mp4 ... AVI, XviD format, WMV format, MP4 format.
DVD Conversion Function
ifo, vob ... AVI, XviD format, WMV format, MP4 format.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
* When playing moving pictures being not supported in AVIAh
When running AVIAh TransC, the following will be displayed in the screen.
1. Select " VCD/MPEG/AVI/WMV/ASF converter ".
2. Select " Open VCD/MPEG/AVI/WMV/ASF/VOB files ".
4. Select " AVI Format ".
3. Open " Moving Pictures not supported in AVIAh ".
Continues in the next page.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select " Other Video Codec ", and press " Config ".
5. Select " Setup Destination File Format ".
7. Select the " XviD ".
8. Select the " MP3 Codec ", then the Audio Bitrate Mode,
Sampling, Audio Mode. (e.g., 128kBit/s, 32,000 Hz, stereo) After
selecting, specify in the " Browse " menu the location where you
would like to save the file.
Continues in the next page.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
9. After selecting the file(s) to be transcoded
push the red Icon Command Button (Ctrl + C).
10. You can view the transformation process on the upper
screen.
When the Codec installed onto your PC causes a problem, only a portion of the file can be transformed. Please install a
stable and well-recognized Codec onto your PC.
To change file formats such as RealVideo Converter (rm, rv, rmvb) or Quick Time Converter (mov, qt, mp4), be sure to
install RealVideo, Quick Time Codec onto your PC. You can download additional Codecs from the Internet.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
If the transcoded moving picture quality is not
acceptable, set the resolution higher than normal,
which will allow for better quality moving pictures.
If the transcoded moving picture quality is not
acceptable, click the "Configure" command
button after video codec selectionand set the
bitrate(kbps) higher than normal and start
encoding. This will allow for better quality
moving pictures.
Note: Resolution may differ according to Codec, so
if you encode higher than the compatible resolution,
it will not run in AVIAh (e.g., in the case of Xvid,
resolution should not be higher than 720x480.)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
1 inch Hard Disk 5.0GB
Hard Disc
OLED Color AM 2.2" / 16,700K Colors / Pixel Format : 521*218
Viewing Angle : Free / Response Time : 5ms
Screen (Panel)
Slide Show
JPEG (irrespective of image size)
MP4 MPEG-4 SP@ML Compliant Video Codec
ASF( Microsoft ISO MPEG4 ) : Supports up to Max. Resolution 720*480
AVI( DivX,XviD etc) : Supports up to Max. Resolution 720*480
WMV9 : Supports up to Max. Resolution CIF( 352*288 )
Moving Picture Playback
Supports Resolution 352*240 (288) : 3 Screen Resolution Modes
(Fine, Normal, Economic)
Video Recording
PC Interface
Video Capture ( JPEG Encode )
High Speed USB 2.0 ( Compatible with USB 1.1 )
MPEG-1 Layer 3 Audio Decode / WMA9 Level 2A Audio Decode
NTSC System or PAL/SECAM System
AV Composite Video/Audio LR-in/out
Audio Playback
TV(Television)
AV(External Input)
Firmware Update
Voice Recording
Power
G.726 Compliant Voice Codec
5V, 2A DC Adapter, 3.7V 1100mAh Li-ion Battery (x2)
69( W ) x 119( H ) x 20( D ) mm / 145g
Product Dimensions
Menu
OSD
English, Spanish, French, Italian, Russian, Korean, Chinese, Japanese
Windows 98SE/ME/2000/XP
System Environment
59
Download from Www.Somanuals.com. All Manuals Search And Download.
To ask for our service through the Internet
* Find information on our company, products, and customer and technical support.
* Update your AVIAh Firmware.
* Consult the product Q&A
* Register your AVIAh product online so that our Customer Service Center is able to provide support as efficiently as
possible.
Notices
The following cases will not be covered by In Warranty Service.
1. Defects or damage caused by accident, misuse, abuse, neglect, fire, flood, lightning or other acts of nature.
2. Damage caused during shipment or handling.
3. If you drop or hit the unit. (This unit has a built-in one inch hard drive, any physical impact on the unit may cause
malfunction.)
4. Repair or attempted repair by anyone not authorized by Ovideon.
5. Products with altered or removed serial numbers.
6. Products purchased in "as is" condition.
7. Improper operation, improper connection to peripherals, improper electrical connections, power surges or not
following the user’s manual.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may
not cause harmful interference, and 2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
Federal Communications Commission rules and regulations. These limits are designed to provide reasonable protection
against radio and television interference in a residential installation. This device uses and generates radio frequency energy
and if not installed and used in accordance with the instructions can cause interference with radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
We, Ovideon, Inc., P.O. Box 9219, Aurora, IL 60598, U.S.A. declares under our sole responsibility that the AVIAh 1000
Portable Multimedia Recorder/Player/TV has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may
not cause harmful interference, and 2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning
Any changes or modifications to the unit, not expressly approved by Ovideon, Inc. could void the user’s authority to operate
the equipment.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Q : The picture on the display screen stops, turns off or des not work?
A : Connect the AC Adaptor to the AVIAh; normal operation should resume. Please recharge the
battery.
Q : I connected the AVIAh to my computer via the USB but my computer does not recognize
it?
A : Verify which operating system is on your computer. If you are using Windows 98 (SE) then
insert the Windows 98 (SE) CD and install the USB drivers.
Q : I cannot hear any sound coming from the AVIAh?
A : First, the AVIAh does not have built in speakers, so you are out of luck there. Second, check
that the volume level is sufficient for listening through the earphones. You did plug in the
earphones in the correct slot…didn’t you?
Q : I push the buttons on the AVIAh and nothing happens?
A : Check if the sliding power switch is in the HOLD position. If it is, slide it out of the HOLD
position to restore functionality to all the buttons. The HOLD feature is used to disable the
buttons in order to avoid accidental usage.
Q : The picture is too bright or too dark?
A : Adjust the picture controls found in the SET UP menu. There are some presets available for
you to use but if you choose you can make adjustments to your liking too.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT WARRANTY
Model
Product Name
Purchase Date
Customer
Year
Tel.
Tel.
Month
Date
Address
Address
Location of Purchase
Warranty Period
Two year from the date of purchase (OLED: One Year)
* When requesting repair, for warranty service please present this warranty with the
date of purchase recorded.
* During the warranty period we will repair any defect in material occurred under
normal conditions free of charge, labor included.
* When warranty period has elapsed, or even during warranty period, we may
charge for our repair service if it is justified to do so.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Ovideon, Inc. (hereinafter referred as Ovideon) hereby warrants all Ovideon products
sold by Ovideon or by Ovideon authorized distributors, resellers and retailers to be free from defects in material and
workmanship in accordance with the following terms and conditions.
Length of Warranty
From the date of original purchase this product is warranted for a period of (2) years on parts and labor and (1) year on the
OLED panel. This warranty may be enforced only by the original purchaser of the product. A sales receipt, invoice or other
proof of purchase must be presented within the warranty period in order to obtain warranty service. Upon expiration of this
warranty the expense of product repair becomes the responsibility of the purchaser. This warranty is valid only for products
purchased and used in the United States of America and Canada.
Obtaining Warranty Service
To obtain service on your product, take the defective product to an authorized Ovideon service center or ship it freight prepaid
to said service center. If shipping the product please use the original packaging of the product or equivalent. Ovideon will not
be responsible for damages due to improper packaging. For information on the location of an authorized Ovideon
Service Center please call 630-236-9917
Terms of Warranty
This warranty covers all defects in material and workmanship in this product except as specified below.
1. Defects or damage caused by accident, misuse, abuse, neglect, fire, flood, lightning or other acts of nature.
2. Damage caused during shipment or handling.
3. Repair or attempted repair by anyone not authorized by Ovideon.
4. Products with altered or removed serial numbers.
5. Products purchased in "as is" condition.
6. Improper operation, improper connection to peripherals, improper electrical connections, power surges or not
following the user’s manual.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Responsibility
Ovideon will pay for labor and materials during the length of warranty for a period of two (2) years from the original date of
purchase. Ovideon will repair the defective product with new or refurbished parts or, at our option, replace the defective product.
Ovideon will not pay for the following:
1. Removal or installation of Ovideon products.
2. Cost of Initial set up.
3. Payment of shipping charges.
Implied Warranties
All Implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the
length of this warranty.
Exclusions to Warranty
Ovideon’s liability for any defective product is limited to the repair or, at Ovideon’s option, replacement of the product. Ovideon
shall not be liable for:
1. Damage to other property caused by any defects in this product, damage based on inconvenience, loss of time or
commercial loss.
2. Any other damages whether incidental, consequential or otherwise.
State Law and this Warranty
Some states do not allow the exclusion or limitation of incidental or consequential damages and /or the limitation of how long an
implied warranty may last so the above limitations and exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which may vary from state to state.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Miele Beverage Dispenser KWT1601SF User Manual
National Instruments Switch PCI 4451 User Manual
Nexus 21 Car Satellite Radio System XM User Manual
Nokia Automobile Accessories HH 12 User Manual
Nortel Networks Telephone NN10042 116 User Manual
NXP Semiconductors Stereo Amplifier SA58670A User Manual
Olympus Microcassette Recorder WS400S User Manual
Omron Nebulizer NE C30 User Manual
Onkyo Portable Speaker SKS 4700 User Manual
Panasonic Cell Phone KX TH102 C User Manual