Miele Cooktop CS1212 User Manual

Operating and Installation  
Instructions  
Ceramic combiset with Induction  
CS 1212  
CS 1221  
en - CA  
To prevent accidents and  
machine damage,  
read the Operating Manual  
before  
installation or use.  
M.-Nr. 07 353 950  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
SAFETY INSTRUCTIONS FOR INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . 30  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Installation dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
CS 1212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
CS 1221 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Cut out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Installation of multiple appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Attach the spring clips and support bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Tiled surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Help protect our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Children  
WARNING- When using your  
Activate the Child Safety Lock so  
~
that the combiset cannot be turned on  
appliance follow basic  
precautions, including the  
following:  
inadvertently.  
Children should not be left  
~
Read all instructions before  
installation or use to prevent  
injury and appliance damage.  
unattended in an area where the  
appliance is in use. Never allow  
children to sit or stand on any part of  
the appliance.  
Caution: Do not store items of interest  
to children in cabinets above the  
appliance. Children climbing on the  
appliance to reach these items could  
be injured.  
This appliance conforms to all  
uniform safety codes and  
regulations. The manufacturer  
cannot be held responsible for  
damage or injury caused by  
improper use of this appliance.  
The appliance is hot during use and  
~
remains so for some time after being  
switched off. Keep children away from  
the appliance.  
Keep these operating instructions  
in a safe place and pass them on  
to any future user.  
Ensure that any packing material, is  
~
disposed of safely and kept out of the  
reach of children. Danger of  
suffocation!  
SAVE THESE INSTRUCTIONS  
Keep all pots and pans out of the  
~
reach of children. Danger of burning or  
Correct usage  
scalding.  
Only use the combiset for residential  
~
cooking, and for the purposes  
described in this manual.  
Other uses are not permitted and can  
be dangerous. The manufacturer will  
not be held liable for damage caused  
by unauthorized use or improper  
operation of any kind.  
Persons who lack physical, sensory  
~
or mental abilities, or experience with  
the appliance should not use it without  
supervision or instruction by a  
responsible person.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Technical Safety  
Install the appliance so that the  
~
power cord does not come into contact  
Installation, repair and maintenance  
~
with any portion of the cooktop which  
may become hot during use.  
work should be performed by a Miele  
authorized service technician. Work by  
unqualified persons could be  
Before servicing, disconnect the  
~
appliance from the main power supply.  
dangerous and may void the warranty.  
Before installing the combiset,  
~
check for externally visible damage.  
Do not operate any appliance with a  
~
damaged cord or plug, or if the  
appliance has been damaged in any  
manner. Contact Miele’s Technical Ser-  
vice Department.  
Do not operate a damaged appliance.  
To guarantee the electrical safety of  
~
this appliance, continuity must exist  
between the appliance and an effective  
grounding system. It is imperative that  
this basic safety requirement be met. If  
there is any doubt, have the electrical  
system of the house checked by a  
qualified electrician. The manufacturer  
will not be held responsible for  
Under no circumstances open the  
~
outer casing of the appliance.  
The combiset must not be installed  
~
outdoors.  
While the appliance is under  
~
warranty repairs should only be  
performed by an authorized service  
technician. Otherwise the warranty is  
void.  
damages caused by the lack, or  
inadequacy, of an effective grounding  
system.  
Before installation, make sure that  
~
the voltage and frequency listed on the  
In the event of any damage to the  
~
appliance, it must be turned off immedi-  
ately and disconnected from the main  
power supply. Contact Miele’s  
Technical Service Department.  
Do not use the appliance until it has  
been repaired. Ensure power is not  
supplied to the appliance until repair  
work is completed.  
data plate correspond with the  
household electrical supply. This data  
must correspond to prevent injury and  
appliance damage. Consult a qualified  
electrician if in doubt.  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance.  
Defective components should be  
~
replaced by Miele original spare parts  
only. Only with these parts can the  
manufacturer guarantee the safety of  
the appliance.  
Do not use the appliance until it has  
~
been properly installed in the  
countertop.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Do not cook on a broken combiset.  
Safety  
~
Any breakages or cracks in the ceramic  
surface of the appliance are defects  
and must be treated as such. If the  
combiset should break, cleaning  
solutions and spills may penetrate the  
broken combiset and create a risk of  
electric shock. Do not use the  
Individuals with a pacemaker or  
~
similar medical device:  
Please note that an electromagnetic  
field develops when the combiset is  
turned on. It is not likely that this will  
affect the pacemaker or similar device.  
If in doubt contact the manufacturer of  
the device or your doctor.  
appliance until it has been repaired.  
Keep magnetized items, e.g. credit  
~
cards, disks, etc. away from the  
combiset while in operation. Damage  
may result.  
Do not touch the combiset or the  
~
surrounding areas during or immediate-  
ly after use. The combiset may be hot  
even though it is dark in color. Wait until  
the residual heat indicators go out.  
Protect your hands with oven mitts  
~
or potholders when using the  
appliance. Use only dry, heat resistant  
potholders. Moist or damp potholders  
used on hot surfaces can result in  
steam burns. Do not let the potholder  
touch the hot heating elements. Do not  
use towels or other bulky items near the  
appliance.  
Do not heat unopened containers.  
~
Built-up pressure may cause the  
container to burst and result in injury.  
Do not flambé under an exhaust  
~
hood. Flames could be drawn up into  
the hood by the suction and the grease  
filters may ignite.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Do not store items on the appliance  
~
when not in use. Items could melt or  
Be aware of loose fitting or hanging  
~
garments when operating the  
appliance, they may present a fire  
hazard.  
catch fire from residual heat or if the  
appliance is turned on inadvertently.  
Always switch the cooking zone(s) off  
after use.  
Never leave a combiset unattended  
~
at high settings or when cooking with oil  
or fat. Overheated oil could ignite.  
Always heat oil slowly, monitoring it as it  
heats.  
Flammable materials should not be  
~
stored on or near the appliance.  
The combiset is fitted with a cooling  
~
fan. Drawers under the combiset are  
not recommended. If a drawer is fitted  
directly underneath the combiset,  
ensure that there is sufficient space  
between the drawer, its contents and  
the underside of the appliance in order  
to ensure sufficient ventilation for the  
combiset. Do not store small items or  
paper in the drawer. They could get  
sucked into the housing by the fan and  
cause damage or impair cooling.  
Never heat an empty pan unless the  
~
pan manufacturer states that you can  
do so.  
Do not use water on grease fires.  
~
Smother or use a dry chemical or  
foam-type extinguisher on any fire or  
flame.  
Make certain that the power cords of  
~
small appliances do not come in  
contact with the appliance. The  
insulation of the cable could become  
Ensure that no aerosols, combustible  
liquids or other flammable materials are damaged. Danger of electric shock!  
kept in this drawer. If cutlery inserts are  
Be careful not to drop anything on  
~
to be placed in the drawer they must be  
the ceramic surface of the combiset.  
made of heat-resistant material.  
Even lightweight objects may cause  
Metallic items kept in a drawer  
damage.  
~
under the combiset can become hot  
when the appliance is used for a longer  
period of time. Use caution.  
Use the proper pan size. Select  
~
cookware with flat bottoms large  
enough to cover the heating element.  
Using undersized cookware will expose  
a portion of the heating element and  
may result in ignition of clothing or  
handles becoming hot. The proper size  
pot or pan will also improve efficiency.  
If the combiset is installed above a  
~
pyrolytic oven it should not be used  
during the pyrolytic process. The  
overheating protection feature of the  
combiset might be activated.  
Never cover the appliance with a  
~
cloth. A fire may result.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Pot and pan handles should be  
Any spills should be removed as  
~
quickly as possible to prevent them  
~
turned inward and not extend over the  
countertop to reduce the risk of burns,  
ignition of flammable materials, and  
spills.  
from burning on and becoming difficult  
to remove.  
The manufacturer cannot be held  
liable for damage caused by  
non-compliance with these  
Important Safety instructions.  
Do not use pots or pans with  
~
pronounced edges or ridges on the  
ceramic combiset. These could scratch  
the combiset permanently. See  
"Cookware" for more information. Grains  
of salt and sand can cause scratches.  
Make sure that the bases of any pots  
and pans are clean, free of any fat or  
oils, and are dry.  
SAVE THESE INSTRUCTIONS  
AND REVIEW THEM  
PERIODICALLY  
To prevent burns and breathing  
~
difficulty, allow the combiset to cool  
before cleaning. Some cleaners may  
produce toxic fumes if applied to a hot  
surface.  
Keep the combiset clean. Salt,  
~
sugar, and grit can cause scratches.  
When wiping spills on a hot  
~
combiset with a wet sponge or cloth, be  
careful to avoid steam burns.  
Do not let flammable materials,  
~
i.e. cooking grease, accumulate on the  
appliance.  
Do not use a steam cleaner to clean  
~
this appliance. Steam could penetrate  
electrical components and cause a  
short circuit.  
Do not allow solid or liquid sugar,  
~
pieces of plastic or foil to fall on the  
burner when hot. If these residues are  
allowed to cool on the ceramic surface  
pitting or even cracking may occur.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the unit  
CS 1212  
aBurner with double booster (BI/II)  
bBurner with single booster (BI)  
cDisplay  
Control knobs for the burners:  
frear  
gfront  
d Cooking zone indicators  
eIndicators  
Indicators  
lOn/Off indicator  
mBooster indicator  
n"Residual Heat" indicator  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the unit  
CS 1221  
aBurner with double booster  
bDisplay  
Indicators  
cIndicators  
dControl knob  
lOn/Off indicator  
mBooster indicator  
n"Residual Heat" indicator  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the unit  
Display  
ß
A
F
= No pan on burner or pan is unsuitable  
= Auto-heat  
= Fault (see "Frequently asked questions")  
C / 0 = Safety cut-out feature (see "Safety features")  
I
= Booster I activated  
II  
H
L
= Booster II activated  
= Overheating protection (see "Safety features")  
= Child safety lock (see "Safety features")  
Burner data  
Burner  
CS 1212  
Rating in watts 240 V**  
Minimum to maximum  
diameter in cm*  
normal:  
1400  
1800  
Front  
Rear  
(10 cm - 16 cm)  
(16 cm - 23 cm)  
with Booster:  
normal:  
2300  
3000  
3700  
with Booster I:  
with Booster II:  
Total:  
3700  
CS 1221  
Rating in watts 240 V**  
Minimum to maximum  
diameter*  
7" - 11 3/4"  
normal:  
2400  
3000  
3700  
(18 cm - 30 cm)  
with Booster I:  
with Booster II:  
* Pots with a bottom diameter in the stated range may be used.  
** The stated power may vary depending on the size and material of the  
cookware.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Clean the combiset  
Heat the appliance  
^ Before using for the first time, clean  
the appliance with a damp cloth and  
dry with a soft cloth.  
When the combiset is first connected to  
the power supply and after a power  
failure, all indicators in the display will  
light up for approx. 1 second. The  
combiset can be used as normal once  
the indicators go out.  
Do not use liquid dish soap to clean  
the combiset, this may cause  
permanent blue discolorations.  
Metal components of the appliance  
have a protective coating which may  
give off a slight odor the first time  
the appliance is heated.  
The smell will dissipate after a short  
time and does not indicate a faulty  
connection or appliance defect.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Induction  
How it works  
If no pan or an unsuitable pan is placed  
on the burner, the burner and the  
combiset will switch off automatically  
after 3 minutes. 0 will flash alternately  
with C in the display.  
An induction coil is located under the  
burner. When the burner is switched  
on, this coil creates a magnetic field  
which impacts directly on the base of  
the pan and heats it up. The burner  
itself is heated indirectly by the heat  
given off by the pan.  
To use the burner again as normal, first  
turn the control knob to "0".  
Induction burners only work when a  
magnetic based pan is placed on it  
(see "Cookware").  
Be careful not to place cutlery or  
other metal objects on the combiset.  
When the appliance is switched on,  
or when there is residual heat  
present, there is the risk of metal  
objects heating up quickly.  
Induction automatically recognizes the  
size of the pan, i.e. heat is only  
generated in the area covered by the  
base of the pan.  
Beware of burns.  
The burner will not work:  
Depending on the material, other  
objects left on the combiset could  
also melt or catch fire.  
– if it is switched on without a pan in  
place, or if the pan is unsuitable  
(non-magnetic base).  
Turn off the burner after use.  
– if the diameter of the pan is too small.  
– if the pan is taken off the burner  
when it is turned on.  
If this happens, ß will flash in the  
display.  
If a suitable pan is placed on the burner  
within 3 minutes, ß will go out and you  
can continue cooking as normal.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Induction  
Noises  
The appliance has a cooling fan to help  
extend the life of the electronics. When  
the combiset is being used at high  
levels for a long period of time, this will  
come on and you will hear a whirring  
sound. The fan may continue to run  
after the appliance has been switched  
off.  
When using an induction burner, the  
following noises can occur in the pan,  
depending on what it is made of and  
how it is constructed.  
– Higher power settings may cause a  
buzz. This will decrease or cease  
altogether when the power setting is  
reduced.  
– If the pan base is made of layers of  
different materials (e.g. a  
sandwiched base), a cracking sound  
may be heard.  
– You may hear a clicking sound from  
the electronic switches, especially on  
lower settings.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Induction  
Cookware  
Pan size  
To make optimum use of the burner,  
choose cookware that fits between the  
inner and outer marking of the burner. If  
the base diameter of the pan is smaller  
than the inner marking, the induction  
heating will not work. The burner will  
behave as if it has no pan on it.  
Suitable pans include:  
– stainless steel pans with a magnetic  
base  
– enameled steel pans  
– cast iron pans  
Unsuitable pans:  
– stainless steel pans without a  
magnetic base  
– aluminum and copper pans  
– glass, ceramic or earthenware pots  
and pans  
To test whether a pot or pan is suitable  
for use on an induction combiset, hold  
a magnet to the base of the pan. If the  
magnet sticks, the pan is suitable.  
Unless the pan manufacturer states  
that you can do so, do not use pans  
with very thin bases on this  
combiset, and never heat empty  
pans. This could damage the  
appliance and cookware, and effect  
the uniformity of the cooking.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Turning the combiset On/Off  
Residual heat indicator  
The residual heat indicator will go out  
once the combiset has cooled to a safe  
temperature.  
,Do not leave the appliance  
unattended while in use.  
To turn the combiset on turn the control  
knob clockwise a to the desired power  
level.  
As long as the residual heat  
indicator is lit do not touch or place  
any heat sensitive items on the  
burner. Danger of burns, and fire  
hazard.  
To turn the combiset off turn the control  
knob counterclockwise b to "0".  
The knob must only be turned  
clockwise to turn the burner on and  
counterclockwise to turn the burner  
off.  
When the combiset is turned on the  
On/Off indicator lights up. Once the  
combiset has reached a factory set  
temperature the residual heat indicator  
will light.  
When the combiset is turned off the  
On/Off indicator will go out.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Settings  
Use for  
Power level*  
Melting butter, chocolate, etc.  
Dissolving gelatin  
1 - 2  
Prepare yogurt  
Warming small quantities of food or liquid  
Keeping delicate dishes warm  
Cooking rice,  
1 - 3  
Thawing frozen vegetables  
Warming liquid or half-set foods  
Thickening sauces, e.g., hollandaise sauce  
Cooking rice pudding  
2 - 4  
3 - 5  
Defrosting frozen foods  
Steaming vegetables, fish, etc.  
Cooking pasta, soups, etc.  
Steaming grains  
Boiling and continued cooking of large quantities of food  
5 - 6  
7
Gently sautéing fish, cutlets, sausages, fried eggs, etc.  
(without smoking the oil/fat)  
Frying pancakes, crepes, etc.  
7 - 8  
9
Boiling large quantities of water  
Parboiling  
Keep warm  
(
* These settings are intended as guidelines only. When cooking with large pots,  
large quantities of food/liquid or without using a lid, a higher setting is needed.  
For smaller quantities select a lower setting.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Auto-heat  
Activating Auto-heat  
When Auto-heat has been activated,  
the burner switches on automatically at  
the highest setting and then switches to  
the continued power level which was  
selected. The "heat-up" time depends  
on which continued power level has  
been chosen (see table).  
^ Turn the control knob  
counterclockwise as far as it will go  
and hold until an A appears in the  
display.  
^ Turn the control knob clockwise to  
the desired continued power level.  
Once Auto-heat has been activated the  
continued power level must be set  
within 10 seconds. After this time the  
level cannot be changed.  
Continued  
Heat-up time  
(approx.)  
power level*  
min : sec  
Changing the continued power level  
after 10 seconds will deactivate the  
Auto-heat function.  
1
2
3
4
5
6
7
8
9
0 : 15  
0 : 15  
0 : 25  
0 : 50  
2 : 00  
5 : 50  
2 : 50  
2 : 50  
-
During the Auto-heat phase an A will  
show in the display.  
The higher continued cooking settings  
are generally used for frying, a short  
heat-up time is needed to heat up the  
pan initially.  
Taking a pan off the burner while  
Auto-heat is in operation interrupts the  
function. It will resume if a pan is  
placed back on the burner within  
3 minutes.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Booster function  
To activate Booster I  
The burner is equipped with a booster  
function to temporarily increase the  
power level. This boost is intended to  
quickly bring large quantities of water  
to the boil, e.g. cooking pasta. When  
the Booster is activated the burner will  
operate with extra power for 10  
minutes.  
^ Turn the control knob past power  
level 9 to BI/II, then turn back to level  
9.  
I appears in the display and the B  
indicator lights up.  
To activate Booster II  
^ Turn the control knob past power  
Once the booster time has elapsed the  
burner will automatically revert to power  
level 9. The B indicator and I or II in the  
display will go out.  
level 9 to BI/II, then turn back to level  
9.  
I appears in the display and the B  
indicator lights up.  
Taking a pan off the burner while the  
booster is in operation interrupts the  
booster function. It will resume if a pan  
is placed back on the burner within 3  
minutes.  
^ Turn the control knob again past  
power level 9 to BI/II, then turn back  
to level 9.  
II appears in the display.  
To deactivate the Booster function  
The booster function can be turned off  
early if desired.  
^ Turn the control knob so often past  
power level 9 to BI/II and back to 9  
until the symbol I respectively II goes  
out in the display; or simply reduce  
the power level.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Keep warm  
Tips  
This function can be used for keeping  
food warm right after it has been  
cooked. It is not for reheating food  
which has already cooled.  
– Cover the pan with a lid.  
– It is not necessary to stir the food  
while it is being kept warm.  
– Nutrients are lost when food is  
cooked, therefore try to keep the  
warming time to a minimum.  
Once activated the keep warm function  
will switch off automatically after 2  
hours.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety features  
Child Safety Lock  
Safety cut-out  
The combiset has a safety cut-out  
feature in case it is not turned off after  
use.  
Keep children away from the  
combiset for their own safety.  
The combiset has a Child Safety Lock  
to prevent children from turning on the  
burner.  
If the burner is heated for an unusually  
long period of time (see table), and the  
power level settings are not adjusted,  
the combiset will turn itself off  
To activate the Child Safety Lock:  
automatically and the residual heat  
indicator will light.  
^ Turn the control knob  
counterclockwise as far as it will go,  
and hold until L appears in the  
display.  
C and 0 will flash alternately in the  
display.  
^ To use the combiset again, first turn  
the control knob to "0".  
If the control knob is touched after the  
lock is activated an L will appear in the  
display for 3 seconds.  
The On/Off indicator and the display  
will go out.  
To deactivate the Child Safety Lock:  
Power level  
Maximum  
^ Turn the control knob  
operating hours  
counterclockwise as far as it will go,  
and hold until the L goes out and 0  
appears briefly in the display.  
1
2
3
4
5
6
7
8
9
10  
5
5
4
3
2
2
2
1
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety features  
Overheating protection  
Once the burner has cooled to a safe  
temperature the combiset can be used  
again as normal.  
The induction coils and the cooling  
element of the electronics are fitted with  
an overheating protection feature. This  
prevents the induction coils and cooling  
element from overheating.  
The overheating protection feature may  
be activated by:  
This mechanism works in the following  
ways:  
– heating an empty pan,  
– oils or fats being heated on the  
highest power level,  
– If the booster function is being used,  
it will be switched off.  
– the underside of the appliance is not  
sufficiently ventilated.  
– The power level will be reduced.  
– If an induction coil is affected, the  
burner will turn off and an H will  
appear in the display.  
If the overheating protection feature  
activates again, contact Miele  
Technical Service.  
^ Turn the control knob to "0".  
Once the H has gone out, the combiset  
can be used again as normal.  
If the control knob is not turned back to  
"0", C and 0 will flash in the display. To  
use the burner again, first turn the  
control knob to "0".  
– If the cooling element is affected, the  
power supply to the burner will be  
reduced.  
Once the cooling element has cooled  
sufficiently the burner will continue  
working again at the original power  
level.  
– If the temperature continues to rise  
after the power level has been  
reduced, the burner will switch off.  
C and 0 will flash alternately in the  
display.  
^ Turn the control knob to "0".  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Do not use a steam cleaner to clean  
this appliance. Steam could  
penetrate electrical components and  
cause a short circuit. Pressurized  
steam could cause permanent  
damage to the surface and to  
components for which the  
Clean any spills immediately before  
they become difficult to remove.  
Clean the appliance regularly,  
preferably after each use. Allow the  
appliance to cool before cleaning.  
manufacturer cannot accept  
responsibility.  
Ceramic surfaces  
^ Wipe off any soiling using a damp  
cloth. Stubborn soiling is best  
removed with a shielded scraper  
blade.  
Do not use any sharp pointed  
objects which could damage the  
seal between the ceramic surface,  
the surrounding frame and the  
countertop.  
^ Apply a ceramic cleaner (available  
from Miele) using a soft cloth or  
paper towel.  
Never use abrasive cleaners,  
caustic (oven) cleaners, dishwasher  
detergent, scouring pads, steel wool  
or hard brushes. They will damage  
the surface.  
^ To remove any limescale deposits or  
metallic residue apply a ceramic  
cleaner using a soft cloth or use a  
shielded scraper blade if necessary.  
^ After cleaning wipe the ceramic  
The ceramic surface can be cleaned  
using a cleaner for ceramic  
surfaces. Follow the manufacturer’s  
instructions.  
surface with a damp cloth and dry.  
A cleaner with a special additive to  
prevent water marks and smears on the  
ceramic surface may be used.  
Make sure that no cleaner residue  
remains on the ceramic surface by  
carefully wiping the combiset with a  
damp cloth. They may damage the  
combiset or produce toxic fumes  
when heated.  
Any melted solids like sugar, plastic or  
aluminum foil should be removed as  
quickly as possible, while the burner is  
still warm. If they are allowed to harden  
the combiset may become pitted.  
^ Turn the burner off.  
^ Using a shielded scraper blade,  
scrape the melted item immediately  
off the burner while it is still hot.  
Use caution: Danger of burns!  
Be sure that pot and pan bases are  
clean and dry.  
After cleaning dry the ceramic  
surface with a soft cloth to prevent a  
build up of limescale deposits.  
^ Allow the combiset to cool and clean  
as previously described.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Stainless steel  
Clean stainless steel surfaces with  
warm water and liquid dish soap  
applied with a non-abrasive sponge  
and then wipe dry with a soft cloth.  
Soak baked or hardened spills first to  
loosen them.  
Stainless steel surfaces can be cleaned  
using a non-abrasive stainless steel  
cleaner (available from Miele).  
To help prevent resoiling, a conditioner  
for stainless steel can also be used.  
Apply sparingly with even pressure.  
Do not use stainless steel cleaner on  
or around the printing, it may rub  
off. Use only a soft sponge with a  
mild solution of warm water and  
liquid dish soap to clean this area.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
,Repairs should only be carried out by an authorized technician in  
accordance with local and national safety regulations. Unauthorized repairs  
could cause injury or appliance damage. The manufacturer cannot be held  
responsible for unauthorized work.  
What if the burner does not heat up after it is turned on?  
Possible fault  
Solution  
The Child safety lock is activated. See "Child safety lock".  
The Overheating protection feature See "Overheating protection".  
has activated.  
The main fuse has blown.  
Check the main fuse.  
Replace the fuse or "trip" the circuit breaker.  
If none of the above is the case, turn the control knob to "0", and disconnect the  
appliance from the electrical supply for 1 minute.  
Reconnect the power and turn the appliance on. If it still does not heat, contact  
Miele Technical Service.  
What if ß appears in the display?  
Possible fault  
Solution  
The burner is turned on but no  
cookware is placed on it.  
Turn the burner off and place suitable  
cookware on it.  
The pan being used is not suitable See "Cookware" for information on type and  
for the combiset or is not the right size of suitable cookware.  
size.  
What if an F appears in the display?  
Possible fault  
Solution  
The temperature sensor for the  
burner is faulty.  
Do not use the combiset until it has been  
repaired. Contact Miele Technical Service.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
What if the combiset turns itself off automatically?  
Possible fault  
Solution  
Either the "Safety cut-out" feature or the See "Overheating protection" or "Safety  
"Overheating protection" feature has cut-out".  
been activated.  
What if one of the following errors occurs:  
- The booster function turns off automatically ahead of time.  
- C and 0 flash alternately in the display.  
- H is shown in the display.  
Possible fault  
Solution  
The overheating protection feature has See "Overheating protection".  
been activated.  
The food does not cook when using the Auto-heat function.  
Possible fault  
Solution  
Large amounts of food are being  
cooked.  
Select a higher continued power level  
or begin cooking at the highest level  
and turn the power back by hand.  
The pot or pan does not transfer the  
heat properly.  
Use the correct pots and pans, see  
"Cookware".  
The cooling fan continues to run after the combiset is turned off.  
Possible fault  
Solution  
This is not a fault.  
The fan continues to run until the  
appliance has cooled sufficiently. It will  
turn off automatically.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Service  
In the event of a fault which you cannot  
easily fix yourself, please contact the  
Miele Technical Service Department at  
the address on the back of this booklet.  
When contacting Technical Service  
please quote the serial number and  
model of the appliance. This  
information is visible on the silver data  
plate supplied with the appliance.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE  
To prevent accidents  
and machine damage  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS FOR INSTALLATION  
Note to the installer:  
This appliance has not been  
~
Please leave this instruction book  
with the consumer for the local  
electrical inspector’s use.  
designed for maritime use or for use in  
mobile installations such as recreational  
vehicles or aircraft. However, under  
certain conditions it may be possible for  
installation in these applications. Please  
contact the Miele Technical Service  
Department with specific requirements.  
The minimum distances given in  
these Installation Instructions must  
be observed in order to ensure safe  
operation. Failure to do so increases  
the risk of fire.  
You must ensure the power cord for  
~
the appliance will not be subject to any  
mechanical strain after installation.  
The cabinetry and venting hood  
should be installed first to prevent  
damage to the appliance.  
If a protective base is installed  
~
beneath the appliance, a minimum  
distance of 1 9/16" (40 mm) between the  
top of the protective base and the  
bottom of the appliance must be  
maintained.  
The countertop must be bonded  
~
with heat resistant (212 °F/100 °C)  
adhesive to prevent distortion or  
dissolving.  
The appliance must not be  
~
Any back splashes must be  
heat-resistant as well.  
permanently sealed into the countertop  
when installed. The sealing strip under  
the edge of the appliance provides a  
sufficient seal for the countertop. See  
"Sealing".  
The appliance must not be installed  
~
over a dishwasher, washer, dryer,  
refrigerator or freezer. Heat radiated by  
the appliance may damage them.  
Keep this instruction book in a safe  
place for reference and pass it on to  
any future user.  
To eliminate the risk of burns or fire  
~
by reaching over heated surfaces  
cabinet storage space above the  
appliance should be avoided. If cabinet  
storage is necessary, the risk can be  
reduced by installing a venting hood to  
project horizontally a minimum of 5"  
(127 mm) beyond the bottom of the  
cabinets.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS FOR INSTALLATION  
Safety distances above the  
If there is more than one appliance  
beneath a hood (e.g. wok burner  
and electric combiset), and they  
have different minimum safety  
distances always observe the  
greater distance.  
appliance  
The minimum safety distance given by  
the hood manufacturer must be  
maintained between the combiset and  
the hood above it. See the installation  
instructions of the hood for these safety  
measurements.  
If the hood manufacturers instructions  
are not available or if flammable objects  
are installed over the combiset (e.g.  
cabinets, utensil rail, etc.), a minimum  
safety distance of 30" (760 mm) must  
be maintained.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS FOR INSTALLATION  
Safety distances to the sides  
of the appliance  
The appliance should only be installed  
(50 mm)  
2 "  
as shown in the illustrations, while  
maintaining the required safety  
distances shown. Do not install the  
appliance between two tall cabinets,  
this is a fire hazard.  
A distance of at least 2" (50 mm) must  
be kept between the countertop cut-out  
and the rear wall because of the high  
temperatures radiated.  
recommended  
The minimum distance a between the  
worktop cut-out and a wall or tall unit to  
the right or left of it is:  
2"  
(50mm)  
2" (50 mm)  
for CS 1112  
CS 1122  
CS 1212  
CS 1221  
CS 1223  
CS 1326  
CS 1411  
1
not recommended  
6" (150 mm) for CS 1312  
CS 1322  
CS 1421  
10" (250 mm) for CS 1011  
CS 1012  
CS 1028  
not permitted  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Safety distance when installing the appliance near a wall with trim or a back  
splash  
A minimum distance of 2" (50 mm) between the trim or back splash and the  
countertop cut-out if required.  
This distance is only necessary if these items are made of combustible materials  
e.g. wood. If the trim or back splash is made of a non-combustible material, the  
required safety distance can be reduced by the thickness of the wall covering  
material.  
aWall frame  
bSheet rock or wall board  
cTrim or back splash  
dCountertop  
eCountertop cut-out  
f2" (50 mm) minimum clearance  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation dimensions  
CS 1212  
aSpring clips  
bAppliance front  
cInstallation height  
dPower supply box with connection cable  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
CS 1221  
aSpring clips  
bAppliance front  
cInstallation height  
dPower supply box with connection cable  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Cut out  
If during installation the seal around  
the frame does not sit flush with the  
countertop in the corners, the corner  
radius, maximum 3/16" (4 mm), can  
be carefully filed down to fit.  
^ Make the worktop cut-out for one or  
more appliances as applicable.  
Remember to maintain a minimum  
safety distance from the back wall,  
as well as from any tall unit or side  
wall to the right or left of the  
appliance(s).  
See also "SAFETY INSTRUCTIONS  
FOR INSTALLATION".  
^ Seal the cut surfaces with a suitable  
sealant to avoid swelling caused by  
moisture.  
The materials used must be heat  
resistant.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation of multiple  
appliances  
When installing more than one combiset appliance, a support bar b must be  
installed between the appliances.  
Countertop cut-out  
two appliances  
Countertop cut-out  
three appliances  
19m  
19mm)  
(500  
(500  
11/16"  
D
D
11/16"  
+
+
-
1
-
1
m
b
)
b
C
C
B
A
A
For the installation of three appliances  
the width of the countertop cut-out D is  
the sum of A and B and C.  
For the installation of two appliances  
the width of the countertop cut-out D is  
the sum of A and C.  
A, B and C = appliance widths  
11 5/16", 15" or 22 11/16"  
If more than three appliances are  
being installed, you will need to add,  
A, B or C for each additional  
appliance.  
(288 mm, 380 mm or 576 mm)  
minus 5/16" (8 mm) to allow for the  
overhang  
D = width of the countertop cut-out  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Sample calculations for a countertop cut-out for three appliances  
A
B
C
D
appliance width  
minus 5/16" (8 mm)  
appliance width  
appliance width  
minus 5/16" (8 mm)  
Countertop  
cut-out  
11"  
11 5/16"  
11"  
33 3/8"  
(280 mm)  
(280 mm)  
(848 mm)  
(288 mm)  
11"  
15"  
14 5/8"  
40 5/8"  
(280 mm)  
(380 mm)  
(372 mm)  
(1032 mm)  
11"  
22 11/16"  
22 3/8"  
56 1/16"  
(280 mm)  
(576 mm)  
(568 mm)  
(1424 mm)  
14 5/8"  
11 5/16"  
11"  
37"  
(372 mm)  
(288 mm)  
(280 mm)  
(940 mm)  
14 5/8"  
15"  
14 5/8"  
44 1/4"  
(372 mm)  
(380 mm)  
(372 mm)  
(1124 mm)  
14 5/8"  
22 11/16"  
22 3/8'  
59 11/16"  
(372 mm)  
(576 mm)  
(568 mm)  
(1516 mm)  
22 3/8"  
11 5/16"  
11"  
44 3/4"  
(568 mm)  
(288 mm)  
(280 mm)  
(1136 mm)  
22 3/8"  
15"  
14 5/8"  
52"  
(568 mm)  
(380 mm)  
(372 mm)  
(1320 mm)  
22 3/8"  
-
22 3/8"  
44 3/4"  
(568 mm)  
(568 mm)  
(1136 mm)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
3/16"  
1"-1  
(25-30mm)  
D
2"  
2"  
(50mm)(50mm)  
19  
(500 mm)  
11/16"  
2"  
2"  
3/16"  
1"-1  
+
-
1
(50mm)(50mm)  
(25-30mm)  
a
a
b
c
a
a
c
a
a
C
5/8"  
3/8"  
22  
B
11"/14  
/
(280/372/568mm)  
11/16"  
A
5/8"  
3/8"  
22  
22  
115/16"/15"/  
11("2/801/4372/568mm)  
/
(288/380/576mm)  
aSpring clips  
bSupport bars  
cSpace between support bar and countertop  
An additional support bar is required for each additional appliance. The position  
for attachment of an additional spacing strip depends on the width of the  
appliance B.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Attach the spring clips and  
support bars  
Wood or solid surface countertops  
Granite countertop  
3/16"  
3/16"  
1"-1  
1"-1  
(25-30mm)  
(25-30mm)  
c
a
a
c
b
b
^ Place the supplied spring clips a  
and the support bars b at the  
marked positions as shown above,  
by laying them on the upper edge of  
the cut-out and then securing them  
with the 1/8" x 1" (3.5 x 25 mm) screws  
(supplied).  
^ Position and attach the spring clips  
a and support bars b with strong,  
double-sided tape c.  
The screws are not needed for granite  
countertops.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
a
^ Coat the edges of the spring clips a,  
d
b
^ and the space d between the  
strips b and the countertop with  
silicone (supplied).  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installing the appliance  
^ Feed the power cord down through  
the cut-out.  
^ Then place the front side of the  
appliance in the countertop cut-out.  
^ Then with a hand on each side of the  
appliance press down evenly on the  
edges until it clicks into position.  
When doing so make sure that the  
appliance seal sits tightly on the  
countertop to ensure it is sealed  
correctly. Do not permanently seal  
into the countertop.  
^ Connect the appliance to the main  
power supply.  
^ Turn the appliance on and check the  
function.  
The appliance can be lifted out  
using a special tool.  
The appliance can also be pushed  
up and out from underneath. Note  
that the rear will need to be pushed  
out first.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Sealing  
Tiled surfaces  
The appliance must not be permanently The grouting a and shaded area under  
sealed into the countertop when  
installed. The sealing strip under the  
edge of the appliance provides a  
sufficient seal for the countertop.  
the appliance frame must be flat and  
even, so that the frame will lie evenly  
and the sealing strip under the edge of  
the upper part of the appliance can  
provide an adequate seal against the  
countertop.  
If the appliance is sealed into  
position, the countertop or appliance  
could be damaged if it needs to be  
removed for maintenance or service.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
Power supply  
,CAUTION: Before installation or  
servicing, disconnect the power  
supply by either removing the fuse,  
shutting off the main power supply  
or manually "tripping" the circuit  
breaker.  
^ Be sure your electrical supply  
matches the data plate.  
The combiset is equipped with a  
flexible metal conduit encasing 3 wires  
ready for connection to a grounded  
power supply.  
A dedicated line and junction box  
should be used to connect the  
combiset to a 15 A circuit.  
Installation work and repairs should  
only be performed by a qualified  
technician in accordance with all  
applicable codes and standards.  
Repairs and service by unqualified  
persons could be dangerous and  
the manufacturer will not be held  
responsible.  
Black wire: connect to L1 (hot)  
Red wire: connect to L2 (hot)  
Green wire: connect to GND (ground)  
240 V, 60 Hz, 15 A fuse rating.  
Be sure the power outlet is accessible  
after installation.  
Before connecting the appliance to  
the power supply, make sure that  
the voltage and frequency listed on  
the data plate correspond with the  
household electrical supply. This  
data must correspond to prevent  
appliance damage. Consult an  
electrician if in doubt.  
For further information, see the wiring  
diagram provided with the appliance.  
, WARNING:  
THIS APPLIANCE MUST BE  
GROUNDED!  
Only operate the combiset after it  
has been installed into the  
countertop.  
Installer:  
Please leave these instructions with  
the consumer.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Help protect our environment  
Disposal of packing materials  
Disposal of an old appliance  
The cardboard box and packing  
materials are biodegradable and  
recyclable. Please recycle.  
Old appliances contain materials that  
can be recycled. Please contact your  
local recycling authority about the  
possibility of recycling these materials.  
Ensure that any plastic wrappings,  
bags, etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
Before discarding an old appliance  
disconnect it from the electrical supply  
and cut off the power cord to prevent it  
from becoming a hazard.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 4608  
M.-Nr. 07 353 950 / 00  
For the most updated manual see the Miele web site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Cooktop KM82 2 User Manual
Minolta Printer Pi3505e PS User Manual
Nagra MP3 Player Audio Recorder User Manual
Nordyne Furnace AND M5S User Manual
Omnimount TV Mount 10035 User Manual
Omron Network Card DR 170 14 User Manual
Panasonic Computer Drive KXL CB30AU User Manual
Panasonic Cordless Saw EY3551 User Manual
Panasonic Personal Computer CF 51 User Manual
ParaBody Home Gym 435104 User Manual