Owner`s Manual
15MF/20MF Series
LCD TV
NEED HELP?CALL US!
MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH
ANY QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE
YOU THROUGH CONNECTIONS, FIRST-TIME SETUP, AND ANY OF
THE FEATURES. WE WANT YOU TO START ENJOYING YOUR NEW
PRODUCT RIGHT AWAY.
CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.MAGNAVOX.COM
Important!
Return your Warranty Registration Card within 10 days.
Download from Www.Somanuals.com. All Manuals Search And Download.
3138 155 23432
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
RETURN YOUR PRODUCT REGISTRATION CARD TODAY
TO GET THE VERY MOST FROM YOUR PURCHASE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
1.
2.
3.
4.
5.
6.
7.
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure
damaged.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed
below, so don’t miss out. Complete and return your Product Registration Card at once to ensure:
Tilt/Stability - All televisions must comply with
recommended international global safety standards for tilt
and stability properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
Power Lines - An outdoor antenna should be located
away from power lines.
Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA
No. 70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
Battery Usage CAUTION - To prevent battery leakage
that may result in bodily injury, property damage, or
damage to the unit:
• Install all batteries correctly, with + and - aligned as
marked on the unit.
17.
*AdditionalBenefitsof
*Proof of
*Product Safety
Notification
Purchase
ProductOwnership
Registering your product
guarantees that you’ll receive all
of the privileges to which you’re
entitled, including special
money-saving offers.
Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain
Do not block any of the ventilation openings.
Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid
injury from tip-over.
By registering your product, you’ll
receive notification - directly from the
manufacturer - in the rare case of a
product recall or safety defect.
8.
9.
warranty service
.
Know these safety symbols
18.
19.
20.
10.
Congratulations on your purchase,
and welcome to the “family!”
11.
12
Dear MAGNAVOX product owner:
Thank you for your confidence in
This “bolt of lightning” indicates
uninsulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
MAGNAVOX.You’ve selected one of the
best-built, best-backed products available today.
We’ll do everything in our power to keep you
happy with your purchase for many years to
come.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
13.
14.
21.
22.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic
Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
The “exclamation point” calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled with
liquids, such as vases, should not be placed on this
apparatus.
As a member of the MAGNAVOX “family,”
you’re entitled to protection by one of the most
comprehensive warranties and
outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll
receive all the information and special offers for
which you qualify, plus easy access to
accessories from our convenient home
shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome - and
thanks for investing in a MAGNAVOX product.
15.
16.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Remove batteries when the unit is not used for a long
time.
CAUTION: To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus large de la fiche
dans la borne correspondante de la prise et pousser
jusqu’au fond.
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
P.S.To getthemostfromyourMAGNAVOX
purchase, you must return your
Warranty Registration Card within 10
days. So please mail it to us right now!
Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
For Customer Use
Example ofAntenna Grounding as
per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
Model No._______________________
Serial No. _______________________
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
3
2
BEFORE INSTALLATION
CONTENT
Introduction
efore proceed to install your new LCD TV, please
Here are a few of the special features of your new LCD
TV.
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 3
Table of Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Bfollow the steps and diagrams as shown to
familiarize yourself with the correct and safe way of
unfolding the base.
Audio/Video In Jacks: Use to quickly connect other
equipment to your LCD TV.
Getting Started
Automatic Channel Programming (Auto Program):
Quick and easy setup of available channels.
Closed Captioning: Allows the viewer to read TV
program dialog or voice conversations as on-screen text.
On-screen Menus: Helpful messages (inEnglish, Spanish,
orFrench)forsettingTVcontrols.
Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing LCD TV on the wall . . . . . . . . . . . . . . . . . . . . . . . .5
Basic TV and Remote Control Operations . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Basic Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Audio/Video Input Connections . . . . . . . . . . . . . . . . . . . . .10
S-Video Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Component (YPbPr) Connections . . . . . . . . . . . . . . . . . . .12
PC (Monitor) Connection . . . . . . . . . . . . . . . . . . . . . . . . . .13
Place the set facing down on a flat surface and a
protective sheet.
1
Unfold the base following the direction as shown on
the diagram.
2
1
2
Remote Control: Works your LCD TV features.
Sleep Timer: Turns off the LCD TV within an amount
of time you specify (15-240 minutes from the current
time).
Place the set upright, you LCD TV is now ready for
3
install.
Install Menu
AutoLock: Lets you block viewing of certain TV
channels if you do not want your children viewing
inappropriate material.
Language Settings . . . . . . . . . . . . . . . . . . . . . . . . . .14
Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Auto Program (Setting Up Channels) . . . . . . . . . . . . . . . . 16
Channel Edit Control (To Add or Delete channels) . . . .17
Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Standard broadcast (VHF/UHF) or Cable TV
channel
capability
Smart Picture and Smart Sound
Smart Picture Control . . . . . . . . . . . . . . . . . . . . . .19
Smart Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Stereo capability: Includes a built-in amplifier and
twin-speaker system, allowing reception of TV programs
broadcast in stereo.
Picture Menu
Treble, Bass, and Balance: Enhance the LCD TV’s
sound.
TV Picture Menu Controls . . . . . . . . . . . . . . . . . .20
Sound Menu
TV Sound Menu Controls . . . . . . . . . . . . . . . . . . .21
3
NOTE:This manual covers different versions
and models. Not all features described in this
manual will match those of your LCDTV. This
is normal and does not require you contacting
your dealer or requesting service.
Features Menu
Auto Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Auto Lock Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Auto Lock Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Auto Lock - Movie Ratings . . . . . . . . . . . . . . . . . . . . . . . . . 25
Auto Lock - TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using The Picture Format . . . . . . . . . . . . . . . . . . . . . . . . . .27
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
INSTALLING LCDTV ONTHEWALL
The stand of your LCDTV is comply with StandardVESA 75 standard,if you intend to install the LCDTV on the wall,
please consult a professional technician for proper installing.
END-OF-LIFE DISPOSAL
PC Mode
PC Picture Controls . . . . . . . . . . . . . . . . . . . . . . . .29
PC Audio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using PC PIP (Picture In Picture) Feature . . . . . . . . . . . . .31
Setting Up The PC Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 32
The manufacture accepts no liability for installations not performed by professional technician.
Your new LCD TV and its packaging contain materials
that can be recycled and reused. Specialized companies
can recycle your product to increase the amount of
reusable materials and minimize the amounts that need
to be properly disposed.
Your product also uses batteries that should not be
thrown away when depleted, but should be handed in
and disposed of as small chemical waste.
General Information
Trouble Shooting Tips . . . . . . . . . . . . . . . . . . . . . . 33
Care And Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . . . . . .37
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . . . . . 38
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
When you replace your existing equipment, please find
out about the local regulations regarding disposal of your
old television,
75x75mm
batteries, and packing materials.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
4
BASICTV AND REMOTE CONTROL OPERATIONS
REMOTE CONTROL
Standby (Power) button
Press to turn the LCD TV on or
off.
Number buttons
-
������
+
� � � �
-
����������������
+
TELEVISIONAND REMOTE CONTROL
Press to select TV channels.
When selecting single-digit
channels, press the number of the
desired channel.
Plug the DC adapter into the DC IN 16V jack
Sleep button
� �
1
on the LCD TV. Plug the power cable into an
outlet.
Press to set the LCD TV to turn
itself off within a certain time.
The LCD TV will pause for a few
seconds then tune to the selected
channel.
Press POWER to turn on the LCD TV.
2
3
4
5
Smart Picture button
Press repeatedly to select either
Personal, Movie, Sports, Weak
signal, or Multimedia picture
setting.
Press VOLUME + to increase the sound level.
Or, press VOLUME – to lower the sound level.
Mute button
M E N U
Press to eliminate or restore the
LCD TV sound. Mute will appear
on the screen when the sound is
muted.
Press CH+ or CH- to select channels.
OK
�
Smart Sound button
Point the remote control toward on the front
of the LCD TV when
operating the LCD TV with the
remote.
P I P
SOURCE
Press repeatedly to select among
the 4 settings; Personal, News,
Music, or Theater.
Menu button
�
C C
Press to activate onscreen menu,
back to previous level inside the
onscreen menu, also press to exit
the onscreen menu.
BATTERY INSTALLATION
Picture Format button
Press the FORMAT button
repeatedly to toggle among the
four screen format sizes; 4:3,
EXPAND 4:3, COMPRESS 16:9,
or HD 4:3.
Remove the battery compartment lid on the
back of the remote.
6
7
Volume button
M
E
N
U
Place two AAA batteries in the
remote. Be sure the (+) and (-) ends of the
batteries line up as marked inside the battery
compartment.
Press to increase or decrease the
sound level, also press to navigate
left/right in onscreen menu.
OK
P
I
P
SOURCE
PIP button
C
C
Press repeatedly to change the
size of PIP window in PC mode.
Source button
Reattach the battery compartment lid.
8
Press to select the video input
source: AV, S-Video, HD, PC, TV.
Previous Channel button
Press to go to previously selected
channel.
OK button
Press to confirm the option you
selected in the onscreen menu.
Channel button
Press to adjust the channel up
or down. Also press to select or
navigate up/down in onscreen
menu.
C.C button
Press the C.C button to select CC
on or CC off.
�
�
�
SAP button
Press to select a sound mode if
available with the TV
programming:Mono, Stereo, or
SAP.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
6
ANTENNA CONNECTION
CABLE BOX CONNECTIONS
f you have a Cable Box, follow either set
combination antenna receives normal
The CableTV signal from
the Cable Company
Iof these steps to complete your
Abroadcast channels (VHF 2–13 and UHF 14–69).
Your connection is easy because there is only one 75
Ω(ohm) antenna jack on the back of your TV, and that’s
where the antenna goes.
�
connections.
�
�
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound
to the LCD TV.
OUTPUT
CH
3
4
CABLE
IN
TO TV
Outdoor or Indoor Antenna
(Combination VHF/UHF)
If your antenna has a round cable
(75 ohm) on the end, then you’re ready to
Connect the Cable TV signal to the IN jack (or
1
75
Coaxial
Cable
�
1
2
3
RF IN or CABLE IN) on the Cable Box.
Connect an RF coaxial cable (not supplied) to
the OUT jack (or TO TV or RF OUT) of the
Cable Box.
Connect the other end of the coaxial cable to
one end of the supplied L-Adapter as shown,
and connect the other end of the adapter to
the TV jack on the LCD TV.
Plug the DC adapter into the DC IN 16V
jack on the LCD TV. Plug the power cable into
an outlet.
Set the Channel 3/4 (or Output channel) switch
of the Cable Box to 3 or 4. Set the TV to the
same channel. When watching TV
programming, change channels at the Cable
Box, not the LCD TV.
connect it to the LCD TV. If your
antenna has flat, twin-lead wire (300 ohm), you
first need to attach the
antenna wires to the screws on a 300- to
75-ohm adapter(not supplied).
�
L-Adapter
Rear Jack panel of
Television
Side Jack Panel of
Television
�
�
Twin-lead
wire to
300-75�
adapter
Connect the antenna (or adapter) to one end
of the supplied L-Adapter as shown, and con-
nect the other end of the
L-Adapter to the TV jack on the side of
the LCD TV.
2
VGA
OR
PC
Antenna
with 75
cable �
4
5
�
L-Adapter
DC Adapter
Power
Cable
Cable Box with Audio/Video Out Jacks
This connection will supply Stereo sound to
the LCD TV.
BASIC CABLETV CONNECTION
Connect the Cable TV signal to the
our Cable TV signal into your home may be a
single, 75Ω(ohm) cable. If so, this connection is
very simple. Follow the step below to connect your
Cable TV signal to your new LCD TV.
IN jack (or RF IN or CABLE IN) on the Cable
Box.
1
Y
S - VIDEO
The Cable TV signal from
Cable Company
Using an RCA-type video cable (not
supplied) connect one end of the video cable to
AUDIO
VIDEO
2
(75
�
coaxial cable)
the Video Out jack of the Cable Box.Connect
the other end of the cable to the yellow VIDEO
jack on the side of the TV.Video cables are
usually marked with yellow and are available
from Magnavox or electronics retailers. Video
jacks on most equipment are yellow.
Side Jack Panel
of Television
Connect the Cable TV signal to one end of the
1
supplied L-Adapter as shown, and connect the
other end of the adapter to the TV jack on the
LCD TV.
�
�
L-Adapter
VGA
PC
Video Cable
Rear Jack panel of
Television
�
Using RCA-type, stereo audio cables (not
supplied), connect one end of the cables to the
3
�
DC Adapter
left and right Audio Out jacks of the Cable Box.
Connect the other end of that cable to the
Audio jack on the side of the LCD TV.Audio
cables are usually marked with red and white
and are available from Magnavox or electronics
retailers.The right
Audio Cable
Power
Cable
Cable
TV signal
audio jack is red and the left audio jack is white.
Match the cable colors to the jack colors.
OUTPUT
CH
�
3
4
L
R
CABLE
IN
TO
TV
AUDIO
OUT
VIDEO
OUT
Plug the DC adapter into the DC IN 16V
jack on the LCD TV. Plug the power cable into
Cable Box
4
an outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
AUDIO/VIDEO INPUT CONNECTIONS
S-VIDEO CONNECTIONS
he AUDIO and VIDEO In jacks on the
he S-Video connection on the rear of the
LCD TV can provide you with better
Trear of the LCD TV enable quick
T
connections of other equipment. Connect a VCR,
DVD Player, Video Game, Camcorder, etc., to
these jacks. To view the material playing on the
other equipment, set the LCD TV to its AV Mode.
picture detail and clarity for the playback of
accessory sources such as DBS (digital broadcast
satellite), DVD (digital video discs), video games, and
VHS VCR (video cassette recorder) tapes than the
normal antenna picture connections.
S
-
VIDEO
AUDIO
VIDEO
S
-
VIDEO
AUDIO
VIDEO
Connect a RCA-style video cable
(usually yellow or marked CVBS) to the
VIDEO OUT jacks of the other
equipment (DVD Player, Camcorder, etc.) and
to the yellow VIDEO jack on the side of the
LCD TV.
Note: The accessory device must have an S-VIDEO OUT
(put) jack in order for you to complete the connection
on this page.
��������� �����
�� ����������
1
���������������
��������������
VGA
PC
�
VGA
�
Connect an S-Video cable to the S-VIDEO jack of
PC
�
�
�������
1
the other equipment (DVD Player, Camcorder, etc.)
�����
Connect RCA-style audio cables (usually red
and white) to the AUDIO OUT (left and right)
jacks on the other equipment. Connect the
other end of the cables to the AUDIO jack on
the side of the LCD TV.
and to the S-VIDEO jack on the rear of the LCD TV. ����� �����
�����������
����� �����
�
2
�
�����������
Connect RCA-style audio cables (usually red and
white) to the AUDIO OUT (left and right) jacks on
the other equipment. Connect the other end of the
cables to the AUDIO jack on the side of the LCD
TV.
������������
2
���
�����
��
���
�
���� ���
��� �� ��������
��������� ������
����� �������
�������
���
�
��
���
�
�
�
���
�
Plug the DC Adapter into the DC IN 16V jack
on the TV. Plug the power cable into an outlet.
Turn on the TV and other equipment.
���� ���
���
��
3
�
�
SOURCE
Press the Source
AV Mode.
button to set the TV to
Plug the DC Adapter into the DC IN 16V
jack on the LCD TV. Plug the power cable into an
outlet. Turn on the LCD TV and other
equipment.
�
�
4
5
3
���
Press PLAY on the other equipment to
view its material on the TV.
M
E
N
U
�
OK
SOURCE
Press the
Source button to set
P
I
P
SOURCE
4
5
the LCD TV to its S-VIDEO mode.
C
C
Press PLAY on the other equipment to
view its material on the LCD TV.
M
E
N
U
�
OK
P
I
P
SOURCE
HELPFUL HINT
C
C
The Audio jack of AV IN is shared
between Video (CVBS) and S-Video signals. If Audio
and Video is connected to Video (CVBS) input, you
can still hear sound if you select S-Video via Source
select, even there appears no image on screen.
HELPFUL HINT
The Audio jack of AV IN is shared between Video
(CVBS) and S-Video signals. If Audio and Video is
connected to S-Video input, you can still hear sound if
you select Video via Source select, even there appears
no image on screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
10
PC (MONITOR) CONNECTION
COMPONENT (YPBPR) CONNECTIONS
his LCD TV can be used as a PC .
Your computer will have to be equipped with a
omponent Video input provide the
T
Chighest possible color and picture
VGA type video output and VGA cable.
resolution in the playback of digital signal source
material, such as with DVD players.
Note: The accessory device must have an
component(YPbPr) output jack in order for you
to complete the connection on this page.
Connect one end of the VGA Video
cable (not supplied) to the Monitor (video)
output on the computer, while connecting the
other ends to the VGA INPUT jack on the LCD
TV.
1
Side Jack Panel
of Television
VGA
PC
���������
������������
������������������
Connect the component (Y, Pb, Pr) Video OUT
�
�
jacks from the DVD player(or similar device) to
the COMP(onent) VIDEO Input jacks on the
bottom of the LCD TV.
1
Although audio connections are not required,
the LCD TV can reproduce the computers
audio out by an AUDIO ADAPTER to the Audio
output jack on the computer (if available)while
connecting the other ends of the Audio cables to
the PC AUDIO Jacks on the bottom of the TV.
�����������
VGA
PC
2
�����������
�
�
Connect the red and white AUDIO CABLES to
the Audio (left ad right) output jacks on the rear
2
�
of the accessory device to the AUDIO IN jack.
Connect the other end of the cable to the Audio
jack on the rear of LCD TV.
Plug the DC Adapter into the DC IN 16V jack on
the LCD TV. Plug the power cable into an outlet.
Turn on the LCD TV and PC.
������������
���
3
�
�
�����
����������
�������
����� �����
Plug the DC Adapter into the DC IN 16 V jack
�����������
�
on the LCD TV. Plug the power cable into an
outlet. Turn on the LCD TV and other
equipment.
3
��
�
���
���
���
�
SOURCE
Press the SOURCE
button until PC MODE
�
��
appears on the screen.
4
SOURCE
�
Press the SOURCE
control to select HD. HD will appear in the
upper left corner on the TV screen.
button on the remote
���������
4
5
ACCESSORY DEVICE
�
EQUIPPED WITH COMPONENT
VIDEO OUTPUTS.
�
Insert a DVD disc into the DVD player and press
the PLAY button on the
DVD Player.
M
E
N
U
M
E
N
U
�
OK
OK
P
I
P
SOURCE
P
I
P
SOURCE
�
C
C
C
C
Download from Www.Somanuals.com. All Manuals Search And Download.
13
12
LANGUAGE SETTINGS
TUNER MODE CONTROL
he Tuner Mode allows you to change the
LCD TV’s signal input to Cable or Air
or English, French or Spanish-speaking
T
FTV owners, an onscreen LANGUAGE option
is present. The LANGUAGEM control enables
you to set the TV’s onscreen menu to be shown in
either English, French or Spanish.
(antenna). It’s important for the LCD TV to know
if you want to receive channels from a cable TV
signal or an antenna signal.
MAIN CONTROLS
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
PICTURE
AUDIO
LANGUAGE
TUNER MODE
INSTALL
INSTALL
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
ENGLISH
INSTALL
CABLE
MANUAL FINE TUNE
FACTORY RESET
M
E
N
U
MANUAL FINE TUNE
FACTORY RESET
Press the Menu
menu.
button to see the onscreen
button to highlight the
button to enter the
M
E
N
U
Press the MENU
button on the
1
2
3
4
5
1
2
3
4
5
remote control to see the onscreen menu.
�
Press the (CH-)
INSTALL menu.
�
�
Press the (CH-)
INSTALL menu.
button to highlight the
button to enter the
�
M
E
N
U
Press the (VOL+)
INSTALL menu.
M
E
N
U
Press the (VOL+)
INSTALL menu.
��
OK
�
�
P I P
SOURCE
P I P
SOURCE
�
�
Press the (CH-)
button to highlight the
Press the (VOL+)
French or Spanish.
button to select English,
TUNER MODE menu.
C
C
C
C
Press the (VOL+)
buttons to select CABLE, AIR (antenna), or
AUTO.
or (VOL-)
�
�
�
M
E
N
U
Press the MENU
button repeatedly to clear
the menu from the screen.
M
E
N
U
Press the MENU
button repeatedly to clear
the menu from the screen.
6
HELPFUL HINT
Remember, the LANGUAGE control makes
only the TV’s onscreen MENU items
appear in English, French or Spanish text. It does
not change the other onscreen text features,
such as Closed Captioning (CC), with TV
shows.
HELPFUL HINT
•WhenCABLEisselected, channels1-125are
available.
•When ANTENNA is selected, channels 2-69
are available.
•When AUTO is selected, your LCD TV will
search automatically for antenna and cable
channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
14
AUTO PROGRAM (SETTING UP CHANNELS)
CHANNEL EDIT CONTROL
our LCD TV can automatically set itself for local
hannel Edit control lets you edit the channel
Yarea (or cable TV) channels. This makes it easy
for you to select only the TV stations in your area by
pressing the CH (+) or CH (-) button.
INSTALL
Clisting. You can add or remove a channel in
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
ENGLISH
MAIN CONTROLS
the LCD TV’s memory.
PICTURE
AUDIO
LANGUAGE
TUNER MODE
INSTALL
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
CHANNEL
SKIPPED
INSTALL
INSTALL
MANUAL FINE TUNE
FACTORY RESET
M
E
N
U
Press the MENU
button on the remote
M
E
N
U
Press the Menu
onscreen menu.
button to see the
button to
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
1
control to show the
onscreen menu.
MANUAL FINE TUNE
FACTORY RESET
1
2
3
4
5
6
START?
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
2
CHANNEL
SKIPPED
Press the (CH-)
highlight the INSTALL menu.
button to
Press the (CH-)
2
3
4
5
6
highlight the INSTALL menu.
AUTO STORE
�
�
Press the (VOL+) button
to enter the INSTALL menu.
PLEASE WAIT
PROG.FOUND
CHANNEL
�
�
�
�
0
3
Press the (VOL+)
INSTALL menu.
button to enter the
CHANNEL EDIT
CHANNEL
SKIPPED
ACTIVE
M
E
N
U
Press the (CH-)
highlight the AUTO PROGRAM control.
button to
M E N U
OK
Press the (CH-)
button to
OK
highlight the CHANNEL EDIT menu.
Press the (VOL+) button to start the AUTO
PROGRAM scanning of channels.
P I P
SOURCE
�
�
P I P
SOURCE
C
C
Press the (VOL+)
button to enter the
�
�
�
�
M
E
N
U
C C
Press the MENU
the menu from the screen, after AUTO STORE
has finished.
button repeatedly to clear
�
�
CHANNEL EDIT menu.
�
�
In CHANNEL column, press (VOL+)
or
(VOL-)
to select the channel you wish
to add or remove.
In SKIPPED column, press (VOL+)
or
7
8
(VOL-)
to select ACTIVE (to add)
or SKIPPED (to delete) the channel you
selected.
M
E
N
U
Press the MENU
button
repeatedly to clear the menu from the
screen.
HELPFUL HINT
After you’ve run Auto Program, check out
the results. Press the CH+
or the
CH-
button and see which channels you can
select.
HELPFUL HINT
Repeat steps 6 –7 to add or delete
additional channels to or from the
LCD TV’s memory.
Remember, an antenna or cable TV signal
must first be connected to your LCD TV
(see pages 8-9 of this owner’s manual).
Download from Www.Somanuals.com. All Manuals Search And Download.
17
16
SMART PICTURE CONTROL
FACTORY RESET
hether you’re watching a movie or a video
Wgame, your LCD TV has video control preset
that will match with your current program source
or content. Smart Picture quickly resets your TV’s
video controls for a number of different types of
programs and viewing conditions that you may
have in your home. The Movies, Sports, Weak
Signal, Multimedia, and Night Smart Picture
controls have been preset at the factory to easily
adjust the TV’s brightness, color, picture,
our TV can be reset to the original
Yfactory settings by performing the
following steps.
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
Personal
INSTALL
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
Movies
Sports
M
E
N
U
Press the MENU
button on the
1
remote control to see the onscreen
menu.
YES
sharpness, tint, and color temperature levels. In
the Personal smart picture mode you can create
your own preferred video settings.
�
�
M
E
N
U
�
Press the (CH-)
INSTALL menu.
button to highlight the
OK
2
3
4
5
6
P
I
P
SOURCE
Press the PICTURE button
on the remote
Weak Signal
Multimedia
�
C
C
control. The current Smart Picture setting will appear
on the screen.
1
2
Press the (VOL+)
INSTALL menu.
button to enter the
M E N U
Press the PICTURE button
repeatedly to
select either Personal, Movies, Sports, Weak
Signal, Multimedia, and Night Smart Picture settings.
OK
Note:The settings of the Personal smart picture mode
can be adjusted in picture options within the onscreen
menu. The Personal mode is the only mode which
can be adjusted by the user via the onscreen picture
control menu.
�
�
P I P
Press the (CH-)
FACTORY RESET control.
button to highlight the
SOURCE
Night
C C
Press the (VOL+)
to the original factory settings.
button to reset the TV
SMART SOUND CONTROL
�
�
M
E
N
U
mart Sound allows you to select from
three user presets and a personal mode
that you set according to you own
preferences through the onscreen Sound
menu. The three user presets(News, Music,
and Theatre) enable you to tailor the TV
sound so as to enhance the particular
program you are watching. Following these
steps to select any of the options.
Press the MENU
clear the menu from the screen.
button repeatedly to
S
Personal
News
Music
Press the Sound button on the remote control. The
current Smart Sound setting will appears on the
screen.
M
E
N
U
1
OK
HELPFUL HINT
�
�
P
I
P
SOURCE
Theatre
C
C
If you reset the TV to the factory settings,
all your present setting on picture, audio,
Close Caption and other feature settings
will be erased and replaced by the
manufacture’s default settings. However,
your AutoLock access code will not be
erased. Please refer to page 23 for details.
Press the Sound button repeatedly to toggle among
the four setting: Personal, News, Music, or Theatre.
2
Note:The settings of the Personal smart sound mode can
be adjusted in sound control within the onscreen
menu. The Personal mode is the only mode which
can be adjusted by the user via the onscreen sound
control menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
TV PICTURE MENU CONTROLS
TV SOUND MENU CONTROLS
o adjust your LCD TV Sound, select a channel
and follow these steps.
o adjust your LCD TV picture, select
a channel and follow these steps.
MAIN CONTROLS
T
1
2
T
1
PICTURE
AUDIO
FEATURES
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
M
E
N
U
MAIN CONTROLS
Press the MENU
button to see the menu.
M
E
N
U
AUDIO
Press the MENU
onscreen menu.
button to see the
INSTALL
PICTURE
AUDIO
FEATURES
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
PICTURE
SMART SOUND
SETTINGS
PERSONAL
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
PERSONAL
Press the (CH-)
AUDIO menu.
button to highlight the
STEREO
VIRTUAL SURROUND
AVL
INSTALL
When PICTURE menu is
highlighted,press the (VOL+)
to enter the
2
button
AUDIO
PICTURE
Press the (VOL+) button to enter the
AUDIO menu.
�
�
SMART SOUND
SETTINGS
TREBLE
BASS
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
3
4
60
60
60
60
60
STEREO
BALANCE
�
�
PICTURE menu.
VIRTUAL SURROUND
AVL
�
Press the (CH+)
or (CH-)
button to
Press the (CH+)
or (CH-)
�
�
M E N U
choose the item you want to adjust: Smart
Sound, Settings, Stereo, Virtual Surround,
AVL.
AUDIO
�
PICTURE
3
button to choose the item you want to
adjust: Smart Picture, Brightness, Color,
Contrast,
SMART SOUND
SETTINGS
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
OK
STEREO
STEREO
M E N U
VIRTUAL SURROUND
AVL
P I P
SOURCE
�
�
�
Smart Sound: Please refer to page19 for
details on Smart Sound Settings.
Settings: Allows you to adjust Treble, Bass,
and Balance of the sound.
Sharpness or Tint.
OK
C C
PICTURE
AUDIO
�
�
Smart Picture: Please refer to
page 20, for details on Smart Picture
Settings.
�
P I P
SOURCE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
VIRTUAL SURROUND
C C
�
�
�
Stereo: Adjust to select between Stereo,
Mono, or SAP.
Brightness: Adjust to brighten the
dark parts of the picture. This
appears to add white to the color.
Color: Adjust to add or reduce
color.
PICTURE
AUDIO
Virtual Surround: Adds greater depth and
dimension to TV sound. Select from Virtual
Surround or OFF.
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
SMART SOUND
SETTINGS
�
�
STEREO
VIRTUAL SURROUND
AVL
YES
AVL (Auto Volume Leveler): When On, AVL
will level out the sound being heard when
sudden changes in volume occur during
commercial breaks or channel changes.
Contrast: Adjust to “sharpen” the
Picture quality. The black portions of
the picture become richer in darkness
and the white become brighter.
Sharpness: Adjust to improve detail.
Tint: Adjust to obtain natural skin
tones.
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
Press the (VOL+)
adjust the item.
or (VOL-)
button to
5
6
7
Press the (VOL+)
or (VOL-)
Press the (CH+)
or (CH-)
button to
4
5
button to adjust the item.
select and adjust other sound controls.
Press the (CH+)
or (CH-)
M
E
N
U
Press MENU
to remove the menu.
button to select and adjust other picture
controls.
HELPFUL HINT
M
E
N
U
Press the MENU
button repeatedly
6
•Treble and Bass can only be accessed
when Smart Sound is set to Personal.
•If Stereo is not presented on a
selected show and the TV is placed in
Stereo mode, the sound coming from
TV will remain in Mono mode.
to remove the menu.
HELPFUL HINT
Brightness, color, contrast and
sharpness can only be accessed when
Smart Picture is set to PERSONAL.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
20
AUTO LOCK ACCESS CODE
AUTO LOCK
ver the next few pages you’ll learn how
MOVIE RATING
TV RATING
he AUTO Lock feature is an
Tintegratedcircuit that receives
and processes data sent by
Oto block programs and understand the rating
terms for certain broadcasts. First, set an access
code.
G
Y
ON
ON
PG
Y7
PG13
R
NC17
G
PG
14
MAIN CONTROLS
broadcasters, or other program
providers, that contain program
content advisories.When programmed
by the viewer, a TV with AUTO Lock
can respond to the content
PICTURE
AUDIO
FEATURES
SOURCE
FEATURES
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
X
MA
M
E
N
U
Press the MENU
onscreen menu.
button to see the
button to highlight the
button to enter the
button to select AUTO
button
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
1
2
3
4
5
6
CLOSED CAPTION
MOVIE RATINGS
TV RATINGS
BLOCK OPTION
MOVIE RATING
TV RATING
CLOSED CAPTION
G: General Audience - All ages
admitted.
TV-Y All children - Appropriate for
all children. Designed for a very young
audience, including children ages 2-6.
This type of programming is not
expected to frighten younger children.
TV-Y7 Directed to Older Children -
Designed for children age 7 and above.
It may be more appropriate for
children who can distinguish between
make-believe and reality. This
Press the (CH-)
CHANGE CODE
advisories and block program content
that may be found objectionable (such
as offensive language, violence, sexual
situations, etc.). This is a great feature
to censor the type of viewing children
may watch.
FEATURES menu.
Most parents would find this program
suitable for all ages. This type of
programming contains little or no
violence, no strong language, and little
or no sexual dialog or situations.
PG: Parental Guidance Suggested -
This programming contains material
that parents may find unsuitable for
younger children. It may contain one
or more of the following:
ENTER NEW CODE
CONFIRM CODE
----
----
�
�
Press the (VOL+)
FEATURES menu.
M E N U
Press the (CH-)
LOCK.
OK
AUTO Lock offers various BLOCKING
controls from which to choose:
Access Code - An Access Code must be
set to prevent children from unblocking
questionable or censored programming set
by their parents.
�
�
programming may include mild fantasy
and comic violence (FV or fantasy
violence).
P I P
SOURCE
Press the (VOL+)
moderate violence, some sexual
situations, infrequent coarse
language, or some suggestive dialog.
PG-13: Parents Strongly
C C
CHANGE CODE will appear on the screen.
TV-G General Audience - Most
parents would find this programming
suitable for all ages. This type of
programming contains little or no
violence, no strong language, and little
or no sexual dialog or situations.
TV-PG Parental Guidance
Suggested -
�
�
Enter a four-digit code using the Number
buttons. The screen will prompt you to confirm
the code you just entered. Enter your same new
code again.
Block Enable - After an access code has
been programmed, you can block
Cautioned -
This programming contains
programming depending on the received
rating and user setting.
material that parents may find
unsuitable for children under the age
of 13. It contains one or more of the
following: violence, sexual situations,
coarse language, or suggestive dialog.
R: Restricted -This programming
is specifically designed for adults.
Anyone under the age of 17 should
only view this programming with an
accompanying
Movie Ratings - Certain blocking options
exist which will block programming based
on ratings patterned by the Motion Pictures
Association of America.
Contains material that parents may
find unsuitable for younger children.
This type of programming contains one
or more of the following: Moderate
violence (V), some sexual situations
(S), infrequent coarse language (L), or
some suggestive dialog (D).
M
E
N
U
Press MENU
repeatedly to remove
the menu from the screen.
7
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
parent or adult guardian. It contains
one or more of the following: intense
violence, intense sexual situations,
strong coarse language, or intensely
suggestive dialog.
TV-14 Parents Strongly Cautioned -
Contains some material that many
parents would find unsuitable for
children under age 14. This type of
programming contains one or more of
the following: intense violence (V),
intense sexual situations (S), strong
coarse language (L), or intensely
suggestive dialog (D).
HELPFUL HINT
Remember that 0711 is the default AutoLock
code. If your access code has been changed by
someone other than you (a child, for example)
or you have forgotten the code, you can always
get in by inputting the default code.
NC-17: No children under the age
of 17 will be admitted. - This type
of programming should be viewed by
adults only. It contains graphic
violence, explicit sex, or crude,
indecent language.
NOTE TO PARENTS:
TV-MA Mature Audience Only -
Specifically designed to be viewed
by adults and may be unsuitable
for children under 17. This type of
programming contains one or more
of the following: graphic violence (V),
explicit sexual situations (S), or crude,
indecent language (L)
It is not possible for your child to unblock a channel
without knowing your access code or changing it to a
new one. If your code has been changed without your
knowledge, then you will become aware that blocked
channels may have been viewed.
X: Adults Only - Thistypeof
programming contains one or more of
the following: very graphic violence,
very graphic and explicit or indecent
sexual acts, and very coarse and
intensely suggestive language
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
AUTO LOCK PROGRAM
AUTO LOCK - MOVIE RATINGS
he AUTO Lock feature can block programming
based on the Movie Industry ratings.
fter your personal access code has been
T
Aset (see the previous page), you are ready to
select the channels or inputs you want to block out
or censor.
Once you’ve entered your access code and the AUTO
Lock features are displayed on the
screen:
MAIN CONTROLS
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
PICTURE
AUDIO
FEATURES
SOURCE
FEATURES
FEATURES
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
M
E
N
U
LOCK PROGRAM
CHANG CODE
CLEAR ALL
BLOCK OPTION
MOVIE RATING
TV RATING
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
Press the MENU
onscreen menu.
button to see the
M
E
N
U
CLOSED CAPTION
Press the MENU
onscreen menu.
button to see the
INSTALL
CLOSED CAPTION
1
2
3
4
5
6
7
BLOCK OPTION
MOVIE RATING
TV RATING
1
2
3
4
5
6
7
8
CLOSED CAPTION
CLOSED CAPTION
�
AUTOLOCK
ACCESS CODE
Press the (CH-)
FEATURES menu.
button to highlight the
button to enter the
button to select
�
Press the (CH-)
FEATURES menu.
button to highlight the
button to enter the
AUTOLOCK
ACCESS CODE
----
----
�
�
�
�
Press the (VOL+)
FEATURES menu.
Press the (VOL+)
FEATURES menu.
AUTOLOCK
G
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
AUTOLOCK
PG
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
BLOCK OPTION
MOVIE RATING
TV RATING
18
PG13
R
NC17
M
E
N
U
BLOCK OPTION
MOVIE RATING
TV RATING
M E N U
Press the (CH-)
AUTO LOCK.
Press the (CH-)
LOCK.
button to select AUTO
button, INPUT USER CODE
X
OK
OK
MOVIE RATING
�
�
P I P
SOURCE
G
PG
PG13
R
NO
�
P I P
SOURCE
Press the (VOL+)
button to enter
C
C
Press the (VOL+)
will appear.
�
NC17
AUTO LOCK menu.
C C
X
�
�
�
�
�
�
Use the Number buttons to enter
your access code.
Use the Number buttons to enter your access
code.
Press the (VOL+)
button to block
Press the (CH-)
RATING.
button to select MOVIE
current selected channel or (VOL-)
button to unblock a channel.
Press the (VOL+)
button to highlight any of the
M
E
N
U
Press MENU
repeatedly to remove the
Movie Rating options. When highlighted, all
these options can be (ON) blocked or (OFF)
unblocked.
8
menu from the screen.
M
E
N
U
Press MENU
from the screen.
repeatedly to remove the menu
9
HELPFUL HINT
When a ratin g is chosen to be blocked, any
higher level rating will also be blocked from
viewing. (i.e.: If “R” is selected to be blocked,
NC-17 and X will automatically be blocked.)
Also, when a rating is set to unblock, any rating
lower will be automatically set to unblock. (i.e:
if PG-13 is unblocked, PG and G will
Note:You can block additional channels by using
Number buttons to jump to another channel.
automatically be unblocked.)
Download from Www.Somanuals.com. All Manuals Search And Download.
25
24
AUTO LOCK -TV RATINGS
USINGTHE PICTURE FORMAT
he AUTO Lock feature can block
programming based on the TV
ou can change the picture format size to match
T
Ythe type of program you are watching. Select
the normal 4:3, EXPAND 4:3, or COMPRESS 16:9,
or HD 4:3 aspect ratios.
Industry ratings.Once you’ve entered your
access code and the AUTO Lock features are
displayed on the screen:
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
CLOSED CAPTION
FEATURES
MAIN CONTROLS
LOCK PROGRAM
CHANG CODE
CLEAR ALL
BLOCK OPTION
MOVIE RATING
TV RATING
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
FEATURES
PICTURE
AUDIO
FEATURES
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
CLOSED CAPTION
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
4 : 3
M
E
N
U
Press the MENU
onscreen menu.
button to see the
M
E
N
U
INSTALL
Press the MENU
onscreen menu.
button to see the
CLOSED CAPTION
1
2
3
4
5
�
AUTOLOCK
1
2
3
CLOSED CAPTION
AUTOLOCK
�
Press the (CH-)
button to
Press (CH -)
FEATURES menu.
button to highlight the
4:3
ACCESS CODE
----
�
�
M E N U
highlight the FEATURES menu.
�
Press the (VOL+)
button
AUTOLOCK
Press (VOL+)
button to enter the
Y
to enter the FEATURES menu.
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
BLOCK OPTION
MOVIE RATING
TV RATING
FEATURES menu.
Y7
M E N U
G
PG
14
OK
�
OK
�
Press the (CH-)
button to
MA
Press (CH -)
button to highlight the
P I P
SOURCE
�
�
highlight AUTO Lock.
P I P
SOURCE
PICTURE FORMAT menu.
4
5
�
TV RATING
NO
Y
Y7
G
PG
14
C C
C C
�
Press the (VOL+)
button,
Press (VOL+)
button to change the
INPUT USER CODE will appear on the
screen.
EXPAND 4:3
PICTURE FORMAT.
�
�
�
MA
�
Note: Press the FORMAT button repeatedly
to toggle among the four screen format
sizes; 4:3, EXPAND 4:3, or COMPRESS
16:9, or HD 4:3.
�
Use the Number buttons to enter your
access code.
6
7
8
COMPRESS16:9
Press the (CH-)
RATING.
button to select TV
M
E
N
U
Press MENU
repeatedly to
remove the menu from the screen.
6
Note: HD 4:3 Picture Format is available in HD Mode
with 720p/1080i only.
Press the (VOL+)
or (VOL-)
button to highlight any of the TV
HD 4:3
Rating options. When highlighted, all these
options can be (ON) blocked or (OFF)
unblocked.
M
E
N
U
Press MENU
repeatedly to
9
remove the menu from the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
26
CLOSED CAPTIONS
PC PICTURE CONTROLS
his TV can also be used as a PC Monitor. A
PC video signal must be present or the TV will
losed Captioning (CC) allows you to
Cread the voice content of television
programs on the TV screen. Designed to help the
hearing impaired, this feature uses onscreen “text
boxes” to show dialogue and conversations while the
TV program is in progress.
MAIN CONTROLS
T
MAIN CONTROLS
PICTURE
AUDIO
SMART PICTURE
BRIGHTNESS
go into standby mode. The PC Picture
controls allow you to adjust the picture.
PICTURE
AUDIO
FEATURES
SOURCE
PICTURE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
CONTRAST
FEATURES
INSTALL
AUTO ADJUST
MANUAL ADJUST
SMART PICTURE
BRIGHTNESS
NORMAL
FEATURES
INSTALL
CAPTION MODE
CC DISPLAY
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
CLOSED CAPTION
CONTRAST
AUTO ADJUST
MANUAL ADJUST
Note: Make sure you are in PC mode.
AUTOLOCK
CLOSED CAPTION
PICTURE
M
E
N
U
Press the MENU
button on the remote
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
CLOSED CAPTION
60
1
2
3
control to see the onscreen menu.
�
�
�
CAPTION MODE
CC DISPLAY
CC1
M
E
N
U
Press the MENU
menu.
button to see the onscreen
button to highlight the
button to enter the
�
When the PICTURE menu is highlighted, press
the (VOL+) button to enter the PICTURE
menu.
1
2
3
4
5
�
PICTURE
M
E
N
U
M E N U
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
Press the (CH -)
FEATURES menu.
60
OK
OK
Press the (CH +)
or (CH -)
button to
�
�
�
�
P I P
SOURCE
P I P
SOURCE
highlight the item that you would like to adjust.
Smart Picture: Adjust the color
temperature of the picture. Select from
Normal, Cool, or Warm.
Press the (VOL+)
FEATURES menu.
PICTURE
C
C
C C
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
Press the (CH -)
CAPTION.
button to select CLOSE
YES
Brightness: Adjust to brighten the darkest
parts of the picture.
Contrast: Adjust to “sharpen” the Picture
quality. The black portions of the picture
become richer in darkness and the white
become brighter.
Auto Adjust: The LCD Monitor will
automatically adjust to the best image
position, phase, and clock setting.
Manual Adjust: The Manual Adjust control
allow you to manually fine tune the image as it
appears on the screen.
�
�
�
�
Press the (VOL+)
button to select the closed
PICTURE
caption you want: CC MUTE, CC1, CC2, CC3,
CC4, Txt1, Txt2, Txt3 or Txt4.
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
PHASE
CLOCK
HORIZONTAL
VERTICAL
Phase-eliminates the horizontal
interfering lines.
Clock-eliminates the vertical interfering
lines.
Note:Closed Caption can also be activated by pressing
CC button on your remote control.
Horizontal-adjust the horizontal
placement of the picture.
Vertical-adjust the vertical placement of the
picture.
HELPFUL HINT
Not all TV programs and product
commercials are broadcast with Closed
Captioning (CC). Nor are all Closed
Captioning MODES (CAPTION 1–4 or TEXT 1–4)
necessarily being used by broadcast
stations during the transmission of a program
offering Closed Captioning. Refer to your area’s TV
program listings for the stations and times of shows
being broadcast with Closed Captioning.
Press the (VOL+)
adjust the item.
or (VOL-)
button to
4
5
M
E
N
U
Press MENU
repeatedly to remove
the menu from the screen.
Note: To adjust other items repeat steps 4 and 5.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
28
USING PC PIP (PICTURE IN PICTURE) FEATURE
PCAUDIO CONTROLS
his TV can also be used as a PC Monitor. A
TPC video signal must be present or the TV
IP (Picture-in-Picture) feature allows you to
Pcall up a subscreen when you are using your
MAIN CONTROLS
will go into standby mode. The AUDIO controls
allow you to adjust the sound.
TV as a monitor.
PICTURE
AUDIO
FEATURES
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
Note: Make sure you are in PC mode.
MAIN CONTROLS
AUDIO
PICTURE
AUDIO
FEATURES
PIP
INSTALL
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
PERSONAL
SOURCE
Note: Make sure you are in PC mode.
FEATURES
M
E
N
U
Press the MENU
onscreen menu.
button to see the
SIZE
INSTALL
PIP
SOURCE
VIDEO
AUDIO
DISPLAY
1
2
3
M
E
N
U
Press the MENU
button on the
remote control to show the
onscreen menu.
1
AUDIO
Press (CH -)
button to highlight the
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
TREBLE
BASS
BALANCE
FEATURES menu.
Press the (CH-)
AUDIO menu.
button to highlight the
�
2
3
�
Press (VOL+)
button to enter the
Press the (VOL+)
menu to the right to enter the AUDIO
menu.
button to shift the
�
FEATURES menu.
AUDIO
�
M E N U
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
�
M E N U
STEREO
OK
Press (VOL+)
button to enter the PIP menu.
Press the (CH +)
or (CH-)
��
4
5
�
�
button to highlight the item that you would
like to adjust:
Smart Sound: Allows you to select from 3
factory-set controls and a
�
�
4
P I P
SOURCE
�
P I P
SOURCE
AUDIO
Press the (CH +)
or ( CH -)
buttons to
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
C C
highlight the item that you would like to adjust.
SIZE: Turn off and set the size of PIP. You
can choose you preferred size of small,
medium, large, or PBP (Picture Beside
Picture).
Video: Select video source of PIP from AV,
S-Video, TV, or Component.
Audio: Select audio source of PIP or PC.
Display: Select which corner of the
position of PIP.
�
C C
personal control. The 3 factory-set
controls (News, Music, and Theatre)
enhance the particular program you are
watching.
Settings: Allows you to adjust Treble, Bass,
and Balance of the Sound.
Stereo: To select from Stereo, Mono, and
SAP.
Virtual Sound: Adds greater depth and
dimension to PC sound.
VIRTUAL SURROUND
�
�
�
�
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
YES
AVL (Auto Volume Leveler)- When ON,
AVL will level out the sound being heard
when sudden changes in volume occur
during commercial breaks or channel
changes.
Press the (VOL+)
buttons to adjust the item.
or (VOL-)
5
6
M
E
N
U
Press MENU
repeatedly to remove the
menu from the screen.
HELPFUL HINT
HELPFUL HINT
To adjust other items repeat steps 4 and 5.
PIP windows with component video source can only
support up to 480i (SD) video signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
30
SETTING UPTHE PC MODE (PERSONAL COMPUTER MONITOR)
TROUBLE SHOOTINGTIPS
No Power
15MF Series (15” LCD TV)
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then
reinsert the plug into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
No
1
Resolution
640 x 480
Mode
V. Frequency (Hz)
59.940
H. Frequency (kHz)
31.469
VGA VESA 60
SVGA VESA 56
SVGA VESA 60
• Make sure a fuse has not blown at the power outlet.
2
56.250
35.156
No Picture
800 x 600
1024 x 768
3
60.317
37.897
• Check the antenna or Cable TV connections. Connect the antenna or Cable TV signal securely to the
TV’s 75Ω jack on the rear of the TV.
• Set TUNER MODE correctly. Details are on page 15.
4
XGA VESA 60
60.004
48.363
• Activate AUTO PROGRAM to find all available channels. Details are on page 16.
• In case you hear only sound and don’t see any picture in S-Video or Video (CVBS) mode. Please check if
you have connected Video signal to S-Video or Video (CVBS) input. Only one of the two video inputs can
be connected to sound. This means that the same sound can be heared in S-Video and Video (CVBS)
mode.
20MF Series (20” LCD TV)
No
1
Resolution
640 x 480
Mode
V. Frequency (Hz)
59.940
H. Frequency (kHz)
31.469
VGA VESA 60
SVGA VESA 56
SVGA VESA 60
No Sound
• Press the VOL+ and VOL- buttons to adjust the volume.
2
56.250
35.156
800 x 600
• Press the MUTE button on the remote control to cancel or restore the volume.
• If you have connected other equipment to the TV (such as a VCR or DVD Player), make sure the audio
cables are connected securely between the TV and the other equipment.
• Check the SOUND settings. Details are on page 19 or 21.
3
60.317
37.897
• In case you hear wrong sound in S-Video or Video (CVBS) mode. Please check if you have connected the
right sound signal to AV in (S-Video or Video input). Only one of the two video inputs can be connected
to sound, but both video signals can be connected. This means that only one of the two sound inputs can
be heared in S-Video and Video (CVBS) mode.
Remote Control does not work.
• Check the batteries. If necessary, replace them with two AAA heavy duty (zinc chloride) or alkaline
batteries.
• Clean the remote control as well as the remote control sensor on the front of the TV.
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then rein
sert the plug into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
• Always point the remote control toward the front of the TV (toward the remote sensor).
• Make sure that you use the supplied Magnavox Remote control, only the supplied Magnavox Remote
control can be used with this LCD-TV set.
TV displays wrong channel or no channels.
• Repeat channel selection.
• Add the channel number(s) into the TV’s memory. Use STORE. Details are on page 15.
• Make sure TUNER MODE is set correctly. Details are on page 15.
Then activate AUTO PROGRAM to set up all available channels. Details are on page 16.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
32
CARE AND CLEANING
INDEX
A
W
WARNING concerning stationary images on the TV
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 8
Audio In jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Auto Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 16, 24
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 2, 4, 36, 38
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD
panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not
leave onmoving images on screen for extended periods of time. Do not display the same images too frequently; if you
do, subtle “ghost” images can be left on the LCD screen. Sources of stationary images may be Laser discs, video games,
Compact Discs Interactive (CD-i), or paused Digital Video Discs (DVDs) or video tapes.
B
Here are some common examples of stationary images:
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 21, 30
Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 21, 30
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20, 29
• DVD menus list DVD content.
• Letterbox black bars appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed on a
TV with standard (4:3) aspect ratio. This is available with some DVDs.
• Video game images and scoreboards
• Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are
less likely to damage the picture tube.
• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.
• Shopping channel logos, pricing displays may be bright and may appear constantly during the show.
These are usually in the same location on the TV screen.
C
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . 4, 9
Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 8
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 17
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 28
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
TV Location
• To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV
where temperatures can become excessively hot (for example, in direct sunlight or near a heating appliance).
• Allow a free flow of air around the TV.
F
Factory Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 36, 37
Factory Service Information . . . . . . . . . . . . . . . . . . .36, 37
Factory reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Cleaning
• To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, non-scratching duster.
• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using
anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water.
Use even, easy, vertical strokes when cleaning.
I
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 35
• Occasionally vacuum the vents on the rear of the TV.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may blemish the cabinet
permanently.
L
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 14
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 38
M
Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 21,30
P
PC (Monitor) Connection . . . . . . . . . . . . . . . . . . . . . . 4, 13
R
Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
S
S-Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 7, 19, 21, 30, 33
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 7, 9, 21, 30
T
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 21, 30
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
TV Operation (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Download from Www.Somanuals.com. All Manuals Search And Download.
35
34
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Labor & One (1) Year Parts & One (1) Year Display
MAGNAVOX warrants this product against defect in material TO OBTAIN WARRANTY SERVICE IN THE U.S.A.,
or workmanship, subject to any conditions set forth as follows:
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Magnavox Customer Care Center at:
1-800-705-2000
PROOF OF PURCHASE:
You must have proof of the date of purchase to receive war-
ranted repair on the product. A sales receipt or other docu-
ment showing the product and the date that you purchased the
product as well as the authorized retailer included, is consid-
ered such proof.
TO OBTAIN WARRANTY SERVICE IN CANADA…
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. MAGNAVOX SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
COVERAGE:
(If this product is determined to be defective)
LABOR: For a period of ninety (90) days from the date of pur-
chase, Magnavox will repair or replace the product, at its
option, at no charge, or pay the labor charges to any Magnavox BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-
authorized service center. After the period of ninety (90) days,
Magnavox will no longer be responsible for charges incurred.
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
PARTS: For a period of one (1) year, Magnavox will supply, at
no charge, new or rebuilt replacement parts in exchange for
defective parts. Magnavox authorized service centers will pro-
vide removal and installation of the parts under the specified
labor warranty.
Some states do not allow the exclusions or limitation of inci-
dental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. In addition, if you enter into a
service contract agreement with the MAGNAVOX partnership
within ninety (90) days of the date of sale, the limitation on
how long an implied warranty lasts does not apply.
DISPLAY: For a period of one (1) year from the date of pur-
chase, Magnavox will supply, at no charge, a new or rebuilt
active display device in exchange for the defective display.
Magnavox authorized service centers will provide removal and
installation of the parts under the specified labor warranty.
(PTV screens carry a thirty (30) day replacement warranty.)
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
• Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation
or repair of antenna systems outside of the product.
• Product repair and/or part replacement because of improper
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause
not within the control of Magnavox.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for
which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifica-
tions.
• Damage occurring to product during shipping when improp-
erly packaged or cost of associated packaging.
• Product lost in shipment and no signature verification of
receipt can be provided.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Products sold AS IS or RENEWED.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026
(Warranty: 4835 710 28125)
Download from Www.Somanuals.com. All Manuals Search And Download.
|