Jura Capresso Coffeemaker IMPRESSA X9 User Manual

IMPRESSA X9  
Instructions for use  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fig. 1  
Fig. 5  
Fig. 9  
Fig. 13  
Fig. 16  
Fig. 2  
Fig. 3  
Fig. 7  
Fig. 11  
Fig. 4  
A
B
Fig. 6  
Fig. 8  
A
B
Fig. 10  
Fig. 14  
Fig. 17  
Fig. 12  
̈
̇
̈
̇
Fig. 15  
Fig. 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
N
O
P
Q
M
R
S
L
K
J
I
H
T
U
G
F
V
E
D
W
X
C
B
A
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating elements Impressa X9  
A
B
C
D
E
F
Drip tray  
Drip grate  
Grounds bin  
Height-adjustable dual spout  
Frothing key  
Macchiato key  
Milk Coffee key  
2x key  
G
H
I
Ristretto key  
Espresso key  
Coffee key  
J
K
L
Cappuccino key  
M Display dialog system (incl. graphics display)  
N
O
P
Bean tank  
Filler funnel for cleaning tablet  
Cup railing  
Q
R
S
Cover for programming keys  
Water tank  
Steam key  
T
U
V
Hot Water key  
Pivoting hot water spout  
Pivoting steam spout  
W Accessories drawer  
Water tank cover  
X
Programming keys  
A
B
C
D
E
F
ON / OFF  
Filter  
Decalcify  
Counter  
Access programming mode  
+
(Page through parameters/higher  
values)  
G
H
I
Rinse  
Clean milk system  
Clean coffee system  
Clean dual spout  
EXIT  
J
K
L
(Page through parameters/lower  
values)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
JURA Impressa X9  
1. Description of the machine......................................................................................................................page  
1.1 Standard functions.........................................................................................................................page  
1.2 DISPLAY to be made by a JURA service technician.............................................................................page  
2. Safety information.................................................................................................................................page  
2.1 Warnings .....................................................................................................................................page  
2.2 Safety precautions .........................................................................................................................page  
3. Preparing the machine ...........................................................................................................................page  
3.1 Checking the mains voltage .............................................................................................................page  
3.2 Checking the fuse ..........................................................................................................................page  
3.3 Filling the water tank.....................................................................................................................page  
3.4 Adding coffee beans .......................................................................................................................page  
4. First use..............................................................................................................................................page  
5. Switching the machine on .......................................................................................................................page  
6. Rinsing the machine ..............................................................................................................................page  
7. Setting the grinding degree .....................................................................................................................page  
8. Adjusting your machine to the water hardness.............................................................................................page  
9. Using the CLARIS plus filter cartridge......................................................................................................page  
9.1 Installing the filter ........................................................................................................................page  
10. Coffee .................................................................................................................................................page  
10.1 Making coffee/espresso/ristretto........................................................................................................page  
10.2 Making cappuccino/macchiato ..........................................................................................................page  
10.3 Making milk coffee ........................................................................................................................page  
10.4 Frothing milk................................................................................................................................page  
10.5 2x key.........................................................................................................................................page  
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
9
9
9
9
9
9
9
9
11. Making hot water..................................................................................................................................page 10  
12. Drawing off steam .................................................................................................................................page 10  
13. Switching the machine off.......................................................................................................................page 10  
14. Programming .......................................................................................................................................page 10  
14.1 Adjusting the machine to the water hardness.......................................................................................page 10  
14.2 Customizing (product definition) .......................................................................................................page 10  
14.3 Setting the time ............................................................................................................................page 11  
14.4 Automatic switch-on time................................................................................................................page 11  
14.5 Automatic switch-off time ...............................................................................................................page 11  
14.6 Programming the language..............................................................................................................page 12  
14.7 Setting up the display.....................................................................................................................page 12  
14.7.1 Unit of measurement (ml/oz)..................................................................................................page 12  
14.7.2 Time format........................................................................................................................page 12  
14.8 Information ..................................................................................................................................page 12  
15. Counter ...............................................................................................................................................page 13  
16. Maintenance ........................................................................................................................................page 13  
16.1 Filling the water tank...................................................................................................................page 13  
16.2 Installing a fixed water supply system..............................................................................................page 13  
16.3 Emptying the coffee grounds container.............................................................................................page 13  
16.4 Emptying the drip tray .................................................................................................................page 13  
16.5 Grounds bin missing .....................................................................................................................page 13  
16.6 Filling the bean tank ....................................................................................................................page 13  
16.7 Removing stones..........................................................................................................................page 13  
16.8 General cleaning instructions .........................................................................................................page 14  
16.9 Disassembling and cleaning the dual spout........................................................................................page 14  
16.10 Cleaning the milk system...............................................................................................................page 14  
16.11 Cleaning the coffee system.............................................................................................................page 14  
16.12 Cleaning the dual spout.................................................................................................................page 15  
16.13 Changing the filter.......................................................................................................................page 15  
16.14 Decalcifying................................................................................................................................page 15  
16.15 Cleaning the grinder and the bean tank............................................................................................page 16  
17. Tips for perfect coffee ............................................................................................................................page 16  
18. Messages.............................................................................................................................................page 17  
19. Disposal ..............................................................................................................................................page 18  
20. Legal information..................................................................................................................................page 18  
21. Technical data ......................................................................................................................................page 18  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information for the user  
2. Safety information  
2.1 Warnings  
Thank you for choosing this JURA product.  
Please study these operating instructions carefully before using  
your new machine and keep them in a safe place for easy reference  
in the future.  
Children are unaware of the dangers that can be caused by elec-  
trical machines; for this reason, children should never be left  
unsupervised with electrical machines.  
Should you require further information or should particular prob-  
lems occur that are not dealt with in sufficient detail for you in  
these operating instructions, please ask your local dealer for the  
information you require or get in touch with us directly.  
The machine may only be used by people who have been  
instructed.  
Never use a faulty machine or one with a damaged power cable.  
2.2 Safety precautions  
Never expose the machine to the effects of weather (rain, snow,  
frost) and never operate it with your hands wet.  
Place your machine on a solid and level surface. Never leave it  
on a warm or hot surface (hobs). Choose a location that is inac-  
cessible for children or pets.  
E
1. Description of the machine  
If you intend not to use the machine for a longer time (e.g. holi-  
days) always switch the machine off with the power switch  
(Fig. 15/D) and disconnect the mains cable.  
Spoil your customers, guests, staff and yourself with superb coffee  
delights. Operating the IMPRESSA X9 is easy even for inexperi-  
enced users. The display dialog system features plain text and com-  
prehensible symbols that take you through each program step by  
step. The Intelligent Pre Brew Aroma System (I.P.B.A.S.©) brings  
out the full coffee aroma in espresso or coffee - always crowned by  
a beautiful crema. You can have your coffee made with powder  
from either of the two grinders or program a mixture according to  
your personal preference. Cappuccino, latte macchiato or milk  
coffee at the press of a key and without shifting around cups.  
Always switch off the machine with the power switch (Fig.  
15/D) and disconnect the mains cable before cleaning the ma-  
chine.  
When removing the plug from the power socket, never tug on the  
corde of the machine itself.  
Never repair or open the machine yourself. Repairs may only be  
done by authorised service centres using original spare parts and  
accessories.  
The intelligent electronic system provides the utmost operating  
convenience. For instance, the active bean tank monitor prompts  
you to refill the two 650 g bean containers.  
The machine is connected to the mains power socket via an  
electric cable. Please ensure that no-one trips ober the cable and  
pulls the machine down. Keep children and pets at a distance.  
With the integrated rinsing, cleaning and decalcifying programs,  
machine maintenance is done at the press of a key.  
Never put the machine or parts of it into the dishwasher.  
To precent overheating, please put the machine in a place with a  
good circulation of air.  
If you use de-scaling agents containing acid, remove any  
splashes and drips on sensitive surfaces, in particular natural  
stone and wood surfaces, straight away or take corresponding  
safety precautions.  
1.1 Standard functions  
Your IMPRESSA X9 makes the following standard products  
(Fig. 1):  
Use service connectors A + B for approved manufacturer’s  
accessories only (Fig. 15 A+ B).  
A
B
C
D
COFFEE  
ESPRESSO  
RISTRETTO  
2x  
E
F
G
H
CAPPUCCINO  
MILK COFFEE  
MACCHIATO  
FROTHED MILK  
3. Preparing the machine  
3.1 Checking the mains voltage  
1.2 DISPLAY to be made by a JURA service  
technician  
The coffee machine is preset to the correct mains voltage. Check if  
your local mains supply voltage complies with the information  
given on the type plate on the rear of the coffee machine (Fig.  
15/C).  
The following DISPLAYcan only be made by a JURA service  
technician:  
a) Customer-specific product set-up. The standard products can be  
replaced with:  
– 2 espressos, 2 coffees, 2 ristrettos, pot of coffee, latte mac-  
chiato, milk, hot water or steam at all times.  
3.2 Checking the fuse  
Check whether the fuse matches your machine (Fig. 15/C).  
– Optionally you can preset the grinder or Rinse key.  
The products can be arranged according to your personal  
preference (Fig. 1).  
3.3 Filling the water tank  
Remove the water tank (Fig. 2) and rinse it out well with cold tap  
water.  
b) Lock products  
c) All the products can be modified by a service technician to meet  
the customer’s specific requirements.  
Then fill the water tank and put it back into the machine.  
Please ensure that the tank locks in properly.  
d) Adjust filter capacity  
e) Assign code groups  
Please only use fresh, cold water. Never fill up with milk,  
mineral water and other fluids. You can also top up water  
without removing the tank. Simply remove the cover and  
pour in the water from above with a vessel and replace the  
lid again.  
– A total of 3 code groups can be assigned. Each code group has  
its own authorization.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4 Adding coffee beans  
WELCOME TO  
You have the possilility of using two different types of coffee  
beans.  
MACHINE HEAT  
Remove the cover from the bean container (Fig. 3)  
Clean out any dirt or foreign objects from the bean container.  
Place a cup under the height-adjustable dual spout (Fig. 6).  
Fill coffee beans into the bean container and replace the cover  
again.  
PRESS RINSE  
Press the Rinse key (Fig. 5/G).  
4. First use  
RINSING  
Make sure to have filled the water tank and the bean tank.  
When rinsing the machine, start with the coffee spout and  
then move on to the two milk spouts.  
Switch the IMPRESSA X9 on with the power switch on the rear  
of the machine (Fig. 15/D).  
Open the programming door on the front (Fig. 4) and switch the  
IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).  
6. Rinsing the machine  
COFFEE READY  
LANGUAGE  
ENGLISH  
Select a language of your choice by pressing the «+» or «–» key  
Press the Rinse key (Fig. 5/G).  
(Fig. 5/F or L).  
RINSING  
Press P to save your selection (Fig. 5/E).  
CONFIRMED  
When rinsing the machine, start with the coffee spout and  
then move on to the two milk spouts.  
TIME  
HOURS  
—:—  
7. Setting the grinding degree  
You can adjust the grinding gear to the roast of your coffee. We  
recommend  
Set the hours by pressing the «+» or «–» key (Fig. 5/F or L).  
Press P to save your setting (Fig. 5/E).  
a finer setting Ǟ (for a lighter roast)  
a coarser setting Ǟ (for a darker roast)  
TIME  
MINUTES  
12:00  
To adjust the grinding degree, turn the setting rings to the  
required position (Fig. 7).  
Set the minutes by pressing the «+» or «–» key (Fig. 5/F or L).  
You have the following options:  
Press P to save your setting (Fig. 5/E).  
The smaller the dots, the finer the grind  
The larger the dots, the coarser the grind  
CONFIRMED  
The grinding degree may only be adjusted while the grinding  
gear is running.  
WELCOME TO  
PRESS RINSE  
8. Adjusting your machine to the water hardness  
Water is heated in the machine. This leads to scale as a result of  
use, which is automatically shown on the display. The machine  
must be adjusted to match the hardness of the water used. For this,  
please use the enclosed test stick.  
Press the Rinse key (Fig. 5/G).  
SYSTEM FILLI  
1° German hardness is equivalent to 1.79° French hardness.  
MACHINE HEAT  
Place a cup under the height-adjustable dual spout (Fig. 6).  
The machine can be adjusted from 1° German hardness up to 30°  
German hardness. The function can also be deactivated.  
PRESS RINSE  
The IMPRESSA X9 is preset to 16° German hardness. You can  
adjust your machine to the local water hardness. Example:  
Press the Rinse key (Fig. 5/G).  
RINSING  
COFFEE READY  
When rinsing the machine, start with the coffee spout and  
then move on to the two milk spouts.  
Press P (Fig. 5/E) until you hear an acoustic signal.  
HARDNESS  
5. Switching the machine on  
Press P again (Fig. 5/E) to activate the programming step.  
Switch the IMPRESSA X9 on with the power switch on the rear  
of the machine (Fig. 15/D).  
Adjust the machine to the required water hardness by pressing  
the «+» or «–» key.  
Open the programming door on the front (Fig. 4) and switch the  
IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDNESS  
MACCHIATO  
Press P to save your setting (Fig. 5/E).  
Last of all the machine brews the coffee.  
CONFIRMED  
The upper of the two bargraphs indicates the duration of the  
coffee brewing process.  
Press any of the product keys to stop the frothing or the  
brewing process prematurely.  
HARDNESS  
The milk system is rinsed automatically 10 minutes after dis-  
pensing milk. You will hear an acoustic signal before the  
rinsing cycle starts.  
Press EXIT (Fig. 5/K).  
SELECT PRODU  
10.3 Making milk coffee  
E
9. Using a CLARIS plus filter cartridge  
COFFEE READY  
When using the CLARIS plus filter cartridge properly, decal-  
cifying your machine will no longer be necessary. For more  
information on the CLARIS plus filter cartridge refer to the  
CLARIS plus brochure “CLARIS. Hard on limescale. Gentle  
on your coffee machine.”  
Place a cup under the height-adjustable dual spout (Fig. 6) and  
press the Milk Coffee key (Fig. 1/F).  
MILK COFFEE  
9.1 Installing the filter  
Coffee and milk are discharged into the cup simultaneously.  
Initial installation of a CLARIS plus filter cartridge needs  
to be carried out by a service technician. Please contact your  
service partner.  
The upper of the two bargraphs indicates the duration of the  
coffee brewing process.  
Press any of the product keys to stop the frothing and the  
brewing process prematurely.  
Change the filter as described in Chapter 21.  
The milk system is rinsed automatically 10 minutes after dis-  
pensing milk. You will hear an acoustic signal before the  
rinsing cycle starts.  
10. Coffee  
10.1 Making coffee/espresso/ristretto  
COFFEE READY  
10.4 Frothing milk  
Place a cup under the height-adjustable dual spout (Fig. 6) and  
press a product key of your choice. The pre-brewing process  
(I.P.B.A.S.©) moistens the coffee powder, briefly interrupts the  
flow of hot water and then begins with the actual brewing  
process. The following example shows how to make 1 espresso.  
COFFEE READY  
Place a cup under the height-adjustable dual spout (Fig. 6) and  
press the Frothing key (Fig. 1/H). Make sure the milk hoses  
(Fig. 8/A) have been dipped into the milk.  
1 ESPRESSO  
MILK FROTH  
A bargraph indicates the duration of the espresso brewing  
process.  
Your milk/frothed milk will be prepared.  
A bargraph indicates the duration of the frothing process.  
To stop the brewing process prematurely, press any of the  
coffee keys. For a perfect frothing result, adjust the dual  
spout (Fig. 6) to the size of your cup.  
Press the frothing hos to stop the frothing process prema-  
turely.  
10.2 Making cappuccino/macchiato  
10.5 2x key  
COFFEE READY  
You can make 2 coffees in one brewing step by preselecting  
the 2x key. Press the 2x key and then the coffee key of your  
choice.  
Place a cup under the height-adjustable dual spout (Fig. 6) and  
press the Macchiato key (Fig. 1/G). Make sure the milk hoses  
(Fig. 8/A) have been dipped into the milk. The following exam-  
ple shows how to make 1 macchiato.  
The milk products cannot be doubled.  
MACCHIATO  
COFFEE READY  
The IMPRESSA X9 starts by making the frothed milk.  
Make 2 ristretti, espressi or coffees by pressing the 2x key  
(Fig. 1/D) first.  
The lower of the two bargraphs indicates the duration of the  
milk frothing process.  
COFFEE READY  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select a coffee product. For example, ristretto (Fig. 1/C)  
14. Programming  
2 RISTRETTI  
The following parameters can be programmed:  
¼ Water hardness  
¼ Setup (product)  
The machine will now make two ristrettos in one brewing step.  
¼ Time  
¼ Switch-on time  
¼ Switch-off time  
¼ Language  
11. Making hot water  
¼ Display (unit and time format)  
COFFEE READY  
¼ Information (number of products made, number of cleaning  
cycles run)  
Place a cup under the pivoting hot water spout (T) and press the  
Hot Water key (T/ ).  
14.1 Adjusting the machine to the water hardness  
HOT WATER  
For this, please refer to Chapter 8 “Adjusting your machine  
to the water hardness”.  
The machine stops dispensing the programmed portion of hot  
water automatically.  
14.2 Customizing (product definition)  
A bargraph indicates the duration of the hot water dispensing  
process.  
You can program each product according to your preference.  
Example: cappuccino  
To stop the machine from dispensing hot water prematurely,  
press any of the product keys.  
COFFEE READY  
Press P (Fig. 5/E) until you hear an acoustic signal.  
There might be some initial splashing when drawing off hot  
water. The pivoting hot water spout becomes hot. Avoid  
direct contact with the skin!  
HARDNESS  
Press the «+» or «–» key until SETTING appears on the display.  
12. Drawing off steam  
SETTING  
COFFEE READY  
Press P again (Fig. 5/E) to activate the SETTING programming  
step.  
Place a cup under the pivoting steam spout (V) and press the  
Steam key (S / ).  
SETTING  
STEAM  
PLEASE  
SELECT  
Select a product key of your choice. In our example it is cappuc-  
cino (Fig. 1/E).  
The machine stops dispensing the programmed portion of steam  
automatically.  
CAPPUCCINO  
WATER  
100 ML  
A bargraph indicates the duration of the steam dispensing  
process.  
Press P (Fig. 5/E) again to activate the setting programming step.  
To stop the machine from dispensing steam prematurely,  
press any of the product keys.  
Press the «+» or «–» key until the required amount of water  
appears on the display.  
Press P (Fig. 5/E) to confirm your setting.  
There might be some initial splashing when drawing off  
steam. The pivoting steam spout becomes hot. Avoid direct  
contact with the skin!  
CONFIRMED  
CAPPUCCINO  
13. Switching the machine off  
FROTH  
20 SEC  
COFFEE READY  
Press P (Fig. 5/E) again to activate the programming step.  
Press the «+» or «–» key to define the amount of frothed milk.  
Press P to confirm your setting (Fig. 5/E).  
Switch the machine off using the ON / OFF key (Fig. 5/A). The  
machine automatically performs a rinsing cycle when you switch  
it off. Only the spouts and nozzles that were used are rinsed.  
CAPPUCCINO  
GOOD-BYE  
MILK  
20 SEC  
Press P (Fig. 5/E) again to activate the programming step.  
Use the power switch on the rear of the machine (Fig. 15/D)  
to disconnect the machine from the mains supply.  
Press the «+» or «–» key to define the amount of frothed milk.  
Press P to confirm your setting (Fig. 5/E).  
Press the «+» or «–» key until POWDER appears on the display.  
CAPPUCCINO  
Press P (Fig. 5/E) again to activate the programming step.  
Press the «+» or «–» key to set the coffee strength.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press P to confirm your setting (Fig. 5/E).  
Press the «+» or «–» key until MACHINE ON appears on the  
display.  
CAPPUCCINO  
UNIT ON  
GRINDER  
50% 50%  
—:—  
Press P again (Fig. 5/E) to activate the MACHINE ON program-  
Press P (Fig. 5/E) again to activate the programming step.  
ming step.  
Press the «+» or «–» key to define the left and the right grinder.  
Press P to confirm your setting (Fig. 5/E).  
UNIT ON  
HOURS  
—:—-  
CAPPUCCINO  
TEMP.  
NORMAL  
Press the «+» or «–» key to set the hours.  
UNIT ON  
Press P (Fig. 5/E) again to activate the programming step.  
HOURS  
07:00  
Press the «+» or «–» key to set the temperature.  
Press P to confirm your setting (Fig. 5/E).  
Press EXIT (Fig. 5/K).  
Press P to confirm your setting (Fig. 5/E).  
UNIT ON  
SETTING  
E
MINUTES  
07:00  
Press the «+» or «–» key to set the minutes.  
PLEASE  
SELECT  
Press EXIT (Fig. 5/K) to leave this programming step or select  
the next product key.  
UNIT ON  
MINUTES  
07:30  
14.3 Setting the time  
Press P to confirm your setting (Fig. 5/E).  
CONFIRMED  
COFFEE READY  
Press P (Fig. 5/E) until you hear an acoustic signal.  
UNIT ON  
HARDNESS  
07:30  
Press the «+» or «–» key to select the next program step or press  
EXIT (Fig. 5/K) to leave programming mode.  
Press the «+» or «–» key until TIME appears on the display.  
TIME  
If —:— appears on the display, the switch-on function is  
deactivated.  
12:00  
Press P again (Fig. 5/E) to activate the TIME programming step.  
TIME  
14.5 Automatic switch-off time  
HOURS  
12:00  
You can program the automatic switch-off time. Choose a  
time between 0.5 and 9.0 hours or —.— (inactive).  
Press the «+» or «–» key to set the hours.  
TIME  
COFFEE READY  
HOURS  
14:00  
Press P (Fig. 5/E) until you hear an acoustic signal.  
Press P to confirm your setting (Fig. 5/E).  
HARDNESS  
TIME  
MINUTES  
14:00  
Press the «+» or «–» key to set the minutes.  
Press the «+» or «–» key until OFF AFTER appears on the  
display.  
TIME  
OFF AFTER  
MINUTES  
14:45  
Press P to confirm your setting (Fig. 5/E).  
5.0 HRS  
Press P again (Fig. 5/E) to activate the OFF AFTER program-  
ming step.  
CONFIRMED  
OFF AFTER  
5.0 HRS  
Press the «+» or «–» key to define after how many hours your  
machine should switch off.  
TIME  
14:45  
Press the «+» or «–» key to select the next program step or press  
EXIT (Fig. 5/K) to leave programming mode.  
OFF AFTER  
9.0 HRS  
Press P to confirm your setting (Fig. 5/E).  
CONFIRMED  
14.4 Automatic switch-on time  
COFFEE READY  
OFF AFTER  
9.0 HRS  
Press the «+» or «–» key to select the next program step or press  
EXIT (Fig. 5/K) to leave programming mode.  
Press P (Fig. 5/E) until you hear an acoustic signal.  
HARDNESS  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14.6 Programming the language  
SETTINGS  
UNIT  
ML  
COFFEE READY  
Press the EXIT key (Fig. 5/K) for with «+» or «–» key to select  
the next program step.  
Press P (Fig. 5/E) until you hear an acoustic signal.  
HARDNESS  
Press EXIT (Fig. 5/K) again to leave programming mode.  
Press the «+» or «–» key until LANGUAGE appears on the  
display.  
14.7.2 Time format  
This setting allows you to select the time format (24 hours or  
AM/PM).  
LANGUAGE  
GERMAN  
Press P again (Fig. 5/E) to activate the LANGUAGE program-  
COFFEE READY  
ming step.  
Press P (Fig. 5/E) until you hear an acoustic signal.  
LANGUAGE  
GERMAN  
Press the «+» or «–» key to select the required language.  
HARDNESS  
LANGUAGE  
Press the «+» or «–» key until DISPLAY appears on the display.  
ENGLISH  
Press P to confirm your setting (Fig. 5/E).  
SETTINGS  
CONFIRMED  
Press P again (Fig. 5/E) to activate the DISPLAY programming  
step.  
SETTINGS  
LANGUAGE  
UNIT  
ML  
ENGLISH  
Press the «+» or «–» key to select the next program step or press  
EXIT (Fig. 5/K) to leave programming mode.  
Press the «+» or «–» key until TIME FORMAT appears on the  
graphics display.  
Press EXIT (Fig. 5/K) again to leave programming mode.  
SETTINGS  
TIME  
FORMAT  
14.7 Setting up the display  
Press P again (Fig. 5/E) to activate TIME FORMAT.  
14.7.1 Unit of measurement (ml/oz)  
SETTINGS  
This setting allows you to select a unit of measurement  
(ml or oz).  
FORMAT  
24 HRS  
Press the «+» or «–» key to select the required time format.  
COFFEE READY  
SETTINGS  
FORMAT  
AM/PM  
Press P (Fig. 5/E) until you hear an acoustic signal.  
HARDNESS  
Press P to confirm your setting (Fig. 5/E).  
CONFIRMED  
Press the «+» or «–» key until DISPLAY appears on the display.  
SETTINGS  
SETTINGS  
TIME  
FORMAT  
Press P again (Fig. 5/E) to activate the DISPLAY programming  
step.  
Press the EXIT key (Fig. 5/K) for with «+» or «–» key to select  
the next program step.  
SETTINGS  
UNIT  
ML  
Press EXIT (Fig. 5/K) again to leave programming mode.  
Press P again (Fig. 5/E) to activate the selected unit of measure-  
ment.  
14.8 Information  
SETTINGS  
With the IMPRESSA X9 you can check each coffee you  
made. You can also check the number of cleaning cycles,  
decalcifying cycles and Claris filter replacements you per-  
formed.  
UNIT  
ML  
Press the «+» or «–» key to select the required unit of measure-  
ment.  
COFFEE READY  
SETTINGS  
UNIT  
OZ  
Press P (Fig. 5/E) until you hear an acoustic signal.  
Press P to confirm your setting (Fig. 5/E).  
HARDNESS  
CONFIRMED  
Press the «+» or «–» key until INFORMATION appears on the  
display.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16.2 Installing a fixed water supply system  
INFORMATION  
Please refer to the operating instructions for the fixed water supply  
system or contact your JURA dealer.  
Press P (Fig. 5/E) to activate the INFORMATION programming  
step.  
1 ESPRESSO  
16.3 Emptying the coffee grounds container  
The coffee grounds container collects the coffee grounds.  
GROUNDS  
200  
PRODUCTS  
Press the «+» or «–» key to select the required item of infor-  
mation.  
EMPTY  
If this information is displayed, the machine will no longer make  
coffee. The grounds container needs to be emptied.  
You can leave the INFORMATION menu any time by  
pressing EXIT (Fig. 5/K).  
Carefully take out the drip tray; it is filled with water. Remove  
the grounds container (Fig. 9/ A).  
Press the «+» or «–» key to select the next program step or press  
EXIT (Fig. 5/K) to leave programming mode.  
Under TOTAL you will find all the products made (coffee,  
hot water and steam)  
E
16.4 Emptying the drip tray  
DRIP TRAY  
EMPTY  
If this information is displayed, the machine will no longer make  
coffee. The drip tray needs to be emptied.  
15. Counter  
The single counter allows you to record your consumption  
over a defined period of time. This counter can be reset to 0  
at any point in time.  
Carefully take out the drip tray; it is filled with water (Fig. 9/B).  
16.5 Grounds bin missing  
COFFEE READY  
GROUNDS BIN  
Press Counter (Fig. 5/D) until you hear an acoustic signal.  
MISSING  
If this message lights up, the grounds bin is not installed properly  
1 ESPRESSO  
or missing altogether.  
150  
PRODUCT  
Press the «+» or «–» key to select a product.  
16.6 Filling the bean tank  
The display will indicate the number of times this product was  
made.  
COFFEE READY  
Press EXIT (Fig. 5/K) to leave the COUNTER.  
FILL  
BEANS  
Reset counter:  
The display dialog system indicates which of the two bean tanks is  
empty. Fill tank with beans as described in Chapter 3.4.  
COUNTER  
RESET  
NO  
The bean level is monitored electronically on the IMPRES-  
SA X9. To ensure smooth operation, we recommend that you  
regularly clean the bean tanks with a dry cloth. Switch the  
machine off with the ON / OFF key (Fig. 5/A) before you do  
so.  
Press the «+» or «–» key until the display indicates  
COUNTER  
RESET  
YES  
Press P to confirm your selection (Fig. 5/E).  
Switch the machine off with the power switch on the rear of the  
machine (Fig. 15/D).  
RESET  
16.7 Removing stones  
Open the programming door on the front (Fig. 4) and switch the  
IMPRESSA X9 off with the ON / OFF key (Fig. 5/A).  
16. Maintenance  
Switch the machine off with the power switch on the rear of the  
machine (Fig. 15/D) and disconnect it from the mains supply.  
16.1 Filling the water tank  
WATER TANK  
Open the hinged door on reverse of the machine (Fig. 10).  
FILL  
If this message is displayed, the machine will no longer make  
coffee/hot water. Refill water as described in Chapter 3.3.  
Push sliders to the rear (Fig. 10) and take the bean tank out of the  
machine.  
Remove any beans with a vacuum cleaner.  
Insert the key (Fig. 11).  
The water tank should be rinsed out and filled with fresh  
water daily. When using a fixed water supply system, we  
recommend regularly rinsing the water tank and filling it  
with fresh water.  
Now turn the key counter-clockwise until the jammed stone is  
released.  
Remove any remaining powder with a vacuum cleaner.  
Re-install the bean tank and pull the sliders to the front before  
closing the door (Fig. 10).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16.8 General cleaning instructions  
MACHINE CLEA  
Never use sharp objects or caustic chemicals for cleaning.  
Clean the inside and outside of the case using a soft, damp cloth. COFFEE READY  
Clean the pivoting steam spout (V) each time it was used.  
After heating milk, draw off some steam to clean the inside of  
the pivoting steam spout (V).  
Always dip both milk hoses into the fluid (Fig. 8/B).  
The water tank should be rinsed out and filled with fresh water  
daily.  
16.11 Cleaning the coffee system  
Visible calcification in the water tank can be removed using  
a commercial decalcifying agent. Take out the water tank  
(Fig.2).  
Once started, the cleaning process must not be interrupted. It takes  
approx. 15 minutes.  
If you are using a CLARIS plus filter cartridge, remove it  
before decalcifying the tank.  
COFFEE READY  
CLEAN  
After having dispensed 220 products or after 80 rinsing cy-  
cles, the machine must be cleaned. The machine will still  
make coffee or hot water/steam. However, we recommend  
that you run a cleaning cycle within the same day. After hav-  
ing made another 20 coffees the cleaning alarm flashes, and  
after yet another 20 coffees, the display will indicate the fol-  
lowing message:  
16.9 Disassembling and cleaning the dual spout  
We recommend to disassemble and clean the dual spout if  
you make milk products regularly.  
Remove the cover of the height-adjustable dual spout by pressing  
the Unlock key (Fig. 12) and remove the coffee distributor (Fig.  
13).  
CLEAN NOW  
Take off the spouts (Fig. 13).  
Take the spouts apart (Fig. 14).  
Open the programming door (Fig. 4) and press the Clean Coffee  
System key (Fig. 5/I) until you hear an acoustic signal.  
Thoroughly rinse all the parts with warm water.  
Reassemble the parts (Fig. 14).  
EMPTY  
TRAY  
When assembling the dual spout, note the colour of the indi-  
vidual parts (Fig. 14).  
EMPTY  
COFFEE  
BIN  
Attach the spouts to the IMPRESSA X9 (Fig. 13).  
Put back the cover, making sure it locks into place (Fig. 13).  
Remove the tray and the grounds bin and EMPTY the coffee  
grounds.  
Use corresponding brushes for carrying out the cleaning  
steps described in sections above.  
COFFEE BIN  
MISSING  
Place the grounds bin and the tray back into the machine.  
16.10 Cleaning the milk system  
PRESS  
KEY  
We recommend to clean the milk system daily.  
Place a sufficiently large receptacle under the height-adjustable  
Once started, the cleaning process must not be interrupted. It takes  
approx. 2 minutes.  
dual spout (Fig. 6).  
Press the Clean Coffee System key (Fig. 5/I) until you hear an  
acoustic signal.  
Open the programming door on the front (Fig. 4).  
MACHINE CLEA  
Press the Clean Milk System key (Fig. 5/H) until you hear an  
acoustic signal.  
You will hear an acoustic signal.  
CLEANER FOR  
ADD TABLET  
PRESS  
KEY  
PRESS  
KEY  
Place a receptacle with a capacity of at least 0.5 litres under the  
height-adjustable dual spout (Fig. 6).  
Drop an original JURA cleaning tablet into the filler funnel  
(Fig. 16).  
Fill a receptacle with approx. 4 dl of water and add 1 1/2 capfuls  
of JURA cappuccino cleaning agent. Dip the two milk hoses into  
this solution (Fig. 8/B).  
Press the Clean Coffee System key (Fig. 5/I).  
MACHINE CLEA  
Press the Clean Milk System key (Fig. 5/H).  
You will hear an acoustic signal.  
MACHINE CLEA  
EMPTY  
TRAY  
You will hear an acoustic signal.  
WATER FOR C  
EMPTY  
PRESS  
KEY  
COFFEE  
BIN  
Remove the tray and the grounds bin and EMPTY the coffee  
grounds.  
Fill a receptacle with approx. 4 dl of fresh water and dip the  
milk hoses into it (Fig. 8/B).  
COFFEE BIN  
MISSING  
Press the Clean Milk System key (Fig. 5/H).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Place the grounds bin and the tray back into the machine.  
EMPTY  
TRAY  
EMPTY  
COFFEE  
COFFEE READY  
BIN  
Remove the tray and the grounds bin and EMPTY the coffee  
16.12 Cleaning the dual spout  
grounds.  
Once started, the cleaning process must not be interrupted. It takes  
approx. 20 minutes.  
COFFEE BIN  
MISSING  
Place the grounds bin and the tray back into the machine.  
COFFEE READY  
CLEAN  
COFFEE READY  
After having dispensed 220 products or after 80 rinsing  
cycles, the machine must be cleaned. The machine will still  
make coffee or hot water/steam. However, we recommend  
that you run a cleaning cycle within the same day. After  
having made another 20 coffees the cleaning alarm flashes,  
and after yet another 20 coffees, the display will indicate the  
following message:  
16.13 Changing the filter  
E
After 50 litres of water, the CLARIS plus filter cartridge will  
need to be replaced. If the capacity exceeds 5%, a message  
on the display will prompt you to change the filter. If it  
exceeds 10%, the display will read CHANGE NOW  
CLEAN NOW  
COFFEE READY  
Open the programming door (Fig. 4) and press Clean Dual Spout  
(Fig. 5/J) until you hear an acoustic signal.  
CHANGE  
FILTER  
EMPTY  
TRAY  
Open the programming door (Fig. 4) and press the Filter key  
(Fig. 5/B).  
EMPTY  
INSERT FILTE  
COFFEE  
BIN  
PRESS  
WATER  
Remove the tray and the grounds bin and EMPTY the coffee  
grounds.  
EMPTY the water tank and insert the filter cartridge in the tank  
together with the cartridge holder, applying gentle pressure. Push  
the cartridge holder into position until it engages audibly (Fig.  
17).  
COFFEE BIN  
MISSING  
Place the grounds bin and the tray back into the machine.  
Fill the water tank with cold, fresh tap water and reinstall it in  
the machine.  
CLEANER FOR  
Place a sufficiently large receptacle under the pivoting hot water  
spout (U).  
PRESS  
KEY  
Press the Hot Water key (T / ).  
Place a sufficiently large receptacle under the height-adjustable  
dual spout (Fig. 6).  
FILTER RINSE  
Fill a receptacle with approx. 4 dl of water and add 1 1/2 capfuls  
of JURA cappuccino cleaning agent. Dip the two milk hoses into  
the solution (Fig. 8/B).  
The flow of water stops automatically.  
COFFEE READY  
Press the Clean Dual Spout key (Fig. 5/J).  
MACHINE CLEA  
The water might be slightly discoloured (no hazard to  
health).  
You will hear an acoustic signal.  
ADD TABLET  
PRESS  
KEY  
16.14 Decalcifying  
Once started, the decalcifying program must not be interrupted. It  
takes approx. 40 minutes.  
Drop an original JURA cleaning tablet into the filler funnel  
(Fig. 16).  
Press the Clean Dual Spout key (Fig. 5/J).  
When using acidic decalcifying agents, immediately remove  
any splashes or drops from sensitive surfaces, in particular  
surfaces made of natural stone or wood, or take appropriate  
preventive measures.  
MACHINE CLEA  
You will hear an acoustic signal.  
WATER FOR C  
COFFEE READY  
DESCALE  
PRESS  
KEY  
We recommend that you decalcify the machine within the  
same day. If you make more coffees, the display will indicate  
DECALCIFY. After yet even more coffees made, the display  
will read DECALCIFY NOW.  
Fill a receptacle with approx. 0.4 litres of fresh water and dip  
the milk hoses into it (Fig. 8).  
Press the Clean Dual Spout key (Fig. 5/J).  
Open the programming door on the front (Fig. 4) and press the  
MACHINE CLEA  
Decalcify key (Fig. 5/C).  
You will hear an acoustic signal.  
EMPTY  
TRAY  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16.15 Cleaning the grinder and the bean tank  
EMPTY  
COFFEE  
BIN  
Switch off the machine by pressing the ON/OFF key (Fig.5/A)  
Disconnect the machine from power supply (Fig. 15/D)  
Open the flap (Fig. 10) on the back of the machine  
Push back the slides (Fig. 10)  
Remove the tray and the grounds bin and EMPTY the coffee  
grounds.  
COFFEE BIN  
Remove the bean tanks by turning them (Fig. 10)  
Remove bean residues using the vacuum cleaner.  
MISSING  
Place the grounds bin and the tray back into the machine.  
Completely dissolve 3 original JURA descaling tablets in 0.7  
litres of water and pour the solution into the empty water tank.  
17. Tips for perfect coffee  
SOLVENT IN T  
Height-adjustable dual spout  
You can adjust the height-adjustable dual spout to the size of your  
cups.  
PRESS  
KEY  
Place 3 sufficiently large receptacles under the height-  
adjustable dual spout, the steam spout and the hot water  
spout (Fig. 18, 1/2 litre receptacle each).  
Grinding  
Please refer to Capter 7 “Setting the grinding degree”.  
Individual programming for perfect coffee  
Please refer to Chapter 14.2. Customizing (product definition).  
Press the Decalcify key (Fig. 5/C).  
MACHINE DECA  
Pre-warm cups  
You can warm the cups in advance with hot water or stream. The  
smaller the quantity of coffee, the more important the warming of  
the cups.  
You will hear an acoustic signal.  
TRAY  
EMPTY  
Remove the tray and the grounds bin. EMPTY the coffee  
grounds.  
TRAY  
MISSING  
Place the grounds bin and the tray back into the machine.  
WATER TANK  
RINSE/F  
Thoroughly rinse out the water tank and fill it with fresh tap  
water.  
Place the water tank back into the machine.  
Place 3 sufficiently large receptacles under the height-  
adjustable dual spout, the steam spout and the hot water  
spout (Fig. 18, 1/2 litre receptacle each).  
PRESS  
KEY  
Press the Decalcify key (Fig. 5/C).  
MACHINE DECA  
CAPPUCCINO  
RINSING  
You will hear an acoustic signal.  
EMPTY  
TRAY  
EMPTY  
COFFEE  
BIN  
Remove the tray and the grounds bin and EMPTY the coffee  
grounds.  
COFFEE BIN  
MISSING  
Place the grounds bin and the tray back into the machine.  
COFFE READY  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. Messages  
Display  
Cause  
Remedy  
WATER TANK  
FILL  
The tank is empty.  
Fill up with water.  
The water level gauge in the tank is jammed.  
Empty tank, rinse, fill water and  
put it back.  
The tank is calcified; the water level gauge is  
clogged.  
Take out tank, decalcify, rinse well, fill with  
water and put it back.  
SELECT PRODU  
FILL  
BEANS  
The bean tank is empty.  
Refill bean tank.  
Message still lights up despite beans having  
been refilled.  
Make a cup of coffee.  
E
Stone jammed in the system.  
Remove stone as described in Chapter 16.7  
“Removing stones”.  
GROUNDS  
EMTY  
The grounds bin is full.  
Take out and empty tray and grounds bin.  
Empty tray and place it back into machine.  
Insert tray properly.  
TRAY  
EMTY  
The tray is full.  
TRAY  
The tray is not properly engaged.  
The grounds bin is not installed.  
200 products dispensed or 80 rinsing cycles run.  
MISSING  
GROUNDS BIN  
MISSING  
Install grounds bin.  
SELECT PRODU  
CLEAN  
Clean according to Chapter 16.12.  
Cleaning cycle completed but message still  
lighting up.  
Run cleaning cycle again but without  
cleaning tablet.  
SELECT PRODU  
DESCALE  
Machine needs to be decalcified.  
Decalcify machine as described in  
Chapter 16.14.  
Decalcifying cycle completed but message still  
lighting up.  
Run decalcifying cycle again using water only  
(no decalcifying agent).  
SELECT PRODU  
FILLTER  
CHANGE  
The filter is no longer effective.  
Change filter as described in Chapter 16.13.  
CHECK BEAN  
CONT-  
AINER  
The bean container is not correctly inserted.  
Insert bean container correctly.  
The slides have not been pulled out.  
The bean container slides are closed.  
Make sure that the sliders have been  
pulled right out.  
Bean containers are very dirty.  
Clean bean container as described in  
section 16.15.  
ERROR  
Please contact your local service partner.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19. Disposal  
21. Technical data  
Please dispose of old machines in an environmentally  
compatible way  
Old machines contain valuable materials capable of being  
recycled which should be salvaged for recycling. Please  
therefore dispose of old machines via suitable collection  
systems.  
Version «CH»  
Voltage:  
230 V AC  
1500 W  
10 A  
Output:  
Fuse:  
Safety check:  
20. Legal information  
Pump pressure:  
2 x max. 15 bar  
5.0 liters  
These operating instructions contain all the information necessary  
for the correct use, operation and maintenance of your machine.  
Understanding and complying with the directives contained in  
these operating instructions are essential for the machine without  
risk and also for safety during operation and maintenance. These  
opperating instructions cannot cover all imaginable users of the  
machine.  
Water tank:  
Capacity, bean container:  
Capacity, grounds container:  
Cable length:  
2x 650 gr  
max. 40 port.  
approx. 1.8 m  
20.5 kg  
Weight:  
We would further point out that the contents of these operating  
instructions in no way constitute a part of or amend any previous or  
existing contract, agreement or legal relationsship. All obligations  
on the part of JURA Elektroapparate AG result from the sales  
agreement question, which also contains the complete details of the  
valid warranty terms. These contractual warranty terms are neither  
extended nor limitet in any way by information contained in these  
operating instructions.  
These operating instructions contain information protected by  
copyright. Photocoping or translation into another language with-  
out the prior written approval of JURA Elektroapparate AG are not  
admissible.  
Dimensions (B x H x D):  
43 x 58.5 x 51 cm  
Version «International»  
Voltage:  
Output:  
230 V AC  
2200 W  
15 A*  
Fuse:  
Safety check:  
Pump pressure:  
2 x max. 15 bar  
5.0 liters  
Water tank:  
Capacity, bean container:  
Capacity, grounds container:  
Cable length:  
2x 650 gr  
max. 40 port.  
approx. 1.8 m  
20.5 kg  
Weight:  
Dimensions (B x H x D):  
43 x 58.5 x 51 cm  
* During the preparation of draw-offs of coffee, steam can also be  
drawn of.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer IWDD 7123 User Manual
Intel Computer Hardware SSDSC2BW120A301 User Manual
Intermec Printer PD4 User Manual
Invacare Mobility Aid 1143199 User Manual
JVC Camcorder GR AX911U User Manual
JVC Portable CD Player RV B550 BU RD User Manual
KitchenAid Mixer KST4054 User Manual
KitchenAid Range KDRP767RSS01 User Manual
Kodak Digital Photo Frame D725 User Manual
Kramer Electronics Wheelchair N 2900 300125 Rev 2 User Manual