AATA INTERNATIONAL B.V.
Manual Stair Robot SR1750 HE
Manual Stair Robot SR1750 HE
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
Preface
AATA International is an innovative and dynamical company, specialised in stair climbing
equipment. Stairrobots are active in over 30 countries worldwide.
This manual is written for machine operators and for technician who take care for the
maintenance of the machine. Although the tiniest details are not set out, the manual is a
useful help for people who are dealing with the machine on a daily basis.
The stairrobot SR 1750 HE has been used for over 20 years by many well known companies
and transport contractors worldwide who are involved in the movement of heavy loads into
and out of customers premises.
The stairrobot SR 1750 HE is designed to carry unit loads weighing up to 1000 kg up- and
down stairs. The accessory equipment, stair approach ramp, manoeuvring dolly and the
turntable, have been designed to assist the movement up to and onto the stairs and the take
off from the top and journey to the final destination.
This manual should be used in conjunction with the cd-rom instruction video, which is
placed on the inside of the manuals cover.
Read this manual and view the instruction cd-rom carefully before putting the SR 1750HE
into operation. Always take note of the safety rules as mentioned in chapter “safety”.
A copy of this manual should be kept with the machine, so the operator has it at his disposal.
AATA International b.v.
Page 3 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
Table of contents
Preface……………………………………………………………………………………………
3
4
5
5
Table of contents .………………………………………………………………………………
Survey of standards……………………………………...………………………………………
Survey of standards………………………………………………………………………...……
1. Technical data…..………………..…………………………………………………………
6
2. Description main components stair robot SR 1750 HE
2.1 Drive…………………………………………………………………………………
2.2 Transmission and brake…………………………………………………………..
2.3 Tracks……………………………………………………………………………….
2.4 Controls……………………………………………………………………………..
2.5 Hydraulic levelling platform……………………………………………………….
2.6 Descent adjuster …………………………………………………………………..
2.7 Hydraulic motor and Pump
7
7
7
8
8
9
3. Ancillary equipment
3.1 Loading ramp……………………………………………………………………………10
3.2 Turntable…………………………………………………………………………………11
3.3 Winch …………………………………………………………………………………..11
3.4 Dolly .…………………………………………………………………………………….11
4. Safety
4.1 General safety precaution……………………………………………………………...12
5. Operators procedure
5.1 Pre-use inspection…………………………………………………………………….. 14
5.2 Loading…………………………………………………………………………………. 15
5.2.1 The correct position of the load…………………………………………….15
5.2.2 Loading procedure ……………………………………………………… …16
5.3 Ascending………………………………………………………………………………..17
5.4 Descending ……………………………………………………………………………18
5.5 Unloading ………………………………………………………………………………19
6. Trouble shooting chart………………………………………………………………………20
7. Track replacement …………………………………………………………………………22
8. Electrical system chart………………………………………………………………………24
9. Hydraulic system chart …………………………………………………………………… 25
10. Parts………………………………………………………………………………………… 26
10.1 Parts list……………………………………………………………………………… 27
11. CD-rom video……………………………………………………………………………… 28
Page 4 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
Survey of standard
We declare that the construction of the stairrobot SR1750HE is according to the provisions of
EC-Directives 89/392/EWG.
Applied harmonized standard:
NEN-EN 60034-5; NEN 10034-6; NEN 10072-2
Applied national standards, directives and technical specifications:
IEC 34-5; IEC 34-7; IEC 72-1
Survey of symbols
Not (or not completely) observing the operating instructions can lead to serious
accidents or damage
Danger as a result of electric tension
Page 5 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
1. Technical data SR 1750 HE
Description
Value
Units
Speed
Lifting capacity
Maximum angle
Weight
3
max. 1000
Max. 45
175
Metres p/minute
Kg.
º
Degrees
Kg.
Weight including standard accessories
232
Kg.
Colour
~~
~~
Length
Width
Height
1185
720
320
1180
720
Mm
Mm
Mm
Mm
Mm
Length loading ramp
Width loading ramp
Drive-motor: single phase low noise AC
Thermal cut-out
Drive-motor capacity
0,75
1
220 or 110
KW
Hp
V
Drive-motor power
Hydraulic-motor: single phase low noise AC
with thermal cut out
Hydraulic-motor capacity
0,375
0,5
220 or 110
KW
Hp
V
Hydraulic-motor power
Hydraulic-pump: built directly on the hydraulic
Motor
Hydraulic-pump capacity
Action pressure max.
Capacity oil tank
0,8
100
0,5
ltr/per minute
Bar
Ltr
Control: remote control manually operated
4-button switch
Mains
24
220/110
50
V
V
Hz
Extension cord (cupper wire)
Extension cord length
3x2,5
25
Mm2
Mtr
Page 6 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
2 Description main components stairrobot SR 1750 HE
2.1. Drive
• Single phase low-noise AC motor
with thermal cut-out
2.2. Transmission and brake
• Worm-gearbox built directly onto the
driving motor
• The worm-wheel reduction forms an affective
brake for the (loaded) StairRobot on the staircase
2. 3. Tracks
• Internally and externally toothed caterpillar tracks,
specially designed for smooth stair climbing
Page 7 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
2. 4. Controls
Publication: 29-07-04
•
Remote control (2 metres cable attached) manually
operated 4-button switch
Press a button to drive
2. 5. Hydraulic-levelling platform
• To increase stability the platform can be adjusted to the angle of the staircase by a
hydraulic cylinder
Page 8 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
2. 6. Descent adjuster
Publication: 29-07-04
•
•
The descent adjuster is located at the rear end of
the machine and is used to adjust the descent of
the lifting platform depending on the weight of the
load.
Turn maximum clockwise for speed : 0
2.7. Hydraulic motor and pump
•
The hydraulic-motor is placed on the drive
motor with the pump built directly onto the
motor
3. Ancillary equipment
3.1. Loading ramp
• The loading ramp is designed to fit neatly
into the stairrobots lifting platform. It
provides a safe ridged platform to transport
the load from the floor-surface to the load-
position on the robot.
Page 9 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
3.2. Turntable
Publication: 29-07-04
• The turntable is a circular piece of
equipment Ø 610 mm, h. 40 mm.
constructed out-of two disks of
block board with hard-plastic
surface to eliminate friction. It is
used to alter the direction of travel
for the (loaded) StairRobot. There
are finger grips on either side for
easy lifting or carrying.
3.3. Winch
•
The winch is designed to fit into the lifting platform of the stairrobot. With the winch a
load can be pulled onto the platform with a minimum amount of effort
Page 10 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
3.4. Dolly
Publication: 29-07-04
•
The dolly is constructed of square steel fittings with four heavy-duty swivel wheels
for easy movements. An extendable frame can be pulled out to increase stability
while driving the StairRobot on the dolly. The lead-off ramp is used to connect the
dolly with the stairway
Page 11 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
4. Safety
4.1. General safety precaution
•
•
It is not permitted to make alterations to the
machine.
Everybody who is working with the machine
has to be acquainted with the safety rules and
has to act upon them.
•
•
•
Two operators are required to operate the
stairrobot
Always check the surroundings where the
stair-robot will be deployed.
Assure that the angle of the stairs is not more
than 45 º
•
•
Make sure that no operator or other person is underneath the (loaded) Stairrobot
during operation
Secure the working area using warning boards or blocking ribbon
Page 12 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
•
•
•
•
•
To avoid misuse by unauthorised persons,
don’t leave the machine unattended.
Within the path of the machine there may be
no obstructions.
Make sure the environment of the machine is
dry, clean and illuminated sufficiently.
With the machine in operation it is forbidden to
be within the operation area of this apparatus.
Before taking the machine into operation the
machine operator has to be certain that
nobody is located within the operating area of
the machine.
•
If the machine is used into the darkness, the
operation position has to be illuminated
sufficiently (about 50 lux).
•
•
•
•
•
The machine may only be used for the
intended activities.
Inspection and maintenance activities have to
be done before operation
During inspection and maintenance the
machine may not be used for other purposes
The local action and safety rules have to be
acted upon.
Make sure you never walk under the robot
during operation.
•
•
•
•
•
•
•
Keep electrical switch boxes closed in order to
prevent contact danger.
Never drive the machine over a cable or
extension cord
Make sure the mains connection is grounded
properly
Make sure that no person stands on a cable
or extension cord
Make sure that the extension cord is unrolled
completely
Extension cord minimal requirements: 3x 2,5
mm cupper wire properly isolated
Extension cord must be no longer than 25
meters.
Page 13 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
5 OPERATORS PROCEDURE
5.1. Pre-use inspection
To ensure proper working and safe operation of the SR 1750 HE StairRobot:
•
•
Check that there are no exposed wires in either the main lead or the pendant control
Check that both the main plug and the continental 16 amp plug and socket are all
secure
•
•
Check that the pendant cable is secure in the pendant and at the machine end
Check that no cable has been deformed. If a deformation is found the use of the
machine should be postponed until the cable has been repaired
•
•
If on the dolly; drive the robot of the dolly on a flat surface, listen for excessive or
unusual noises from any part of the machine
Check that the ramp will raise to it’s full extend and that it’s not leaking oil. When fully
extended the ramp should cause the platform’s front edges to be in firm contact with
the floor and the tracks to be lifted of the floor at the front end about one centimetre
Irregularities are best noticed by rising the ramp repeatedly to it’s full up position and
then quickly pressing the down button to release the pressure. If, while the ramp is
fully extended the top of the cylinder moves more than 5 mm either towards the front
or the back of the Robot then the machine should not be used
•
•
•
It is quite usual for some oil to be present around the top of the cylinder, however
with the up-button pressed and the pump running there should be no oil running
down the outside of the cylinder
Check that the down-button permits the ramp to descend, and in addition check that
the descend adjuster permits the speed of the descend to be altered. From fully
extended to fully closed should take no less than 25 seconds with an applied load of
80 Kilogram with the ascend adjuster turned maximum counter clockwise
Check that no rubber blocks on the tracks are severely damaged or torn off
Check the drive-tooth side of the tracks for exposed stringing cords or damage
Check that nothing has been trapped between the tracks and the robot
Check that when going from forward to reverse direction on the pendant button the
delay before the tracks start moving in the opposite direction is no longer than one
second. Any longer time indicates sloppiness in the drive chain which should be
investigated
•
•
•
•
•
•
•
Check that the platform sits down on the lower base when lowered
Check that the castors of the dolly can move in all directions and are not jammed
Check that the cable of the winch has not been deformed
If there are no defects found the machine is ready for use. If a defect is found do not use the
machine until the Stair-Robot is repaired.
Page 14 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
5.2. Loading
5.2.1 The correct position of the load
•
If the load is not placed in the correct position on the lifting
platform, the Stair robot can get instable during the process of
climbing or descending a staircase. This can cause the robot to
fall down the stairs resulting in serious damage and injuries.
•
The objective is to create an optimal centre of gravity position for the loaded stairrobot
considering the ‘weight distribution’ of the load
•
Before positioning the load on the
lifting platform the centre of gravity of
the load has to be determined
•
•
Position the load on the platform with
the centre of gravity of the load end
forward (in positive area)
Position the load with the centre of
gravity of the load as low as possible
to the lifting platform.
Page 15 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
•
The centre of gravity of the load should
be within the positive area between the
tracks.
5.2.2. Loading procedure
•
•
•
Start the procedure by securing the area for loading. Move the dolly with the stair
robot into the desired position for loading.
Always unroll extension power cable and connect with the robot before connecting
to mains
Reverse the Robot of the dolly, fit the loading-ramp into position at the front of the
robot
•
•
Slot the winch into the lifting platform at the rear of the stairrobot
Pull the winch-hawser out and connect it with the load. The load can now be
winched into position on the stairrobot, one man operating the winch and one man
guiding the load of the ramp onto the platform. While operating the winch the
lifting platform will rise until the platform has reached the same gradient as the
loading-ramp
•
•
•
Connect the load secure to the lifting platform. Note: never fit any straps to the
chassis-bracket
If the load is secured to the stairrobot the winch and loading ramp can be
removed
Always remove the winch from the stairrobot before ascending the stairway
because it ads length to the dimensions of the stairrobot
Turn the descent-adjuster maximum clockwise
•
•
•
Lift the platform +/- 10 cm by pushing the up-button
Push the down-button to lower the platform and turn the descent adjuster counter
clockwise until the platform starts to descent. Lower the platform
The stairrobot can now be driven back on the dolly; use the up-button to keep the
‘platform level’ in horizontal position
•
Page 16 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
5.3. Ascending
Load level
•
•
Ideal load level is obtained
by adjusting the platform to
the gradient of the stairs or
dolly
The objective is to maintain
a horizontal level of the
platform during operation.
•
Note: do not lower the platform
over its balance point, the Stair
robot will get instable during
the process of climbing or
descending a staircase. This
can cause the robot to fall
down the stairs resulting in
serious damage and injuries.
•
Move the loaded stairrobot on the dolly with the forward end towards the bottom of
the stairs
•
•
Fit the lead on ramp between the dolly and second or third step on the stairs.
Secure a load support strap (6 m) to the reverse end of the stairrobot. Place the strap
across the forward end of the load to be held by one of the operators.
Both operators should move on to the stairs and make sure that no person is beneath
the stairrobot
One operator will use the remote control button panel and drive the loaded stairrobot
up the stairs. The other will firmly hold the load support strap; this will enable him to
‘feel’ the balance of the load. He also uses it to restrain the load if necessary and
helps its forward movement at the top of the stairs
•
•
•
•
The control operator will press the forward button to drive the stairrobot over the lead
on ramp and up the stairs. He will keep the load level by adjusting the platform
position using the up or down button.
The up or down button can be pressed simultaneously with either forward or reverse
Press and the platform will lower
Press and the platform will lift
Press and the stairrobot will drive forward
Press and the stairrobot will reverse
Page 17 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
•
•
The stair robot can be stopped at any stage by just releasing the buttons
When arriving on top of the stairway; stop the stairrobot on the stairs and place the
dolly in position at the top of the stairs in front of the stairrobot. Pull the extendable
frame out of the dolly to increase stability
•
•
Start the forward movement again
Note: expect a change of gradient from the level of the stairs to the gradient of the
dolly
•
When the stairrobot has reached the ‘point of balance’, the operator holding the load
support strap should assist in the movement by gently pulling the load support strap,
to ease the load downward. The other operator should keep the ideal load level
during this operation. The stairrobot can then be driven forward to settle onto the dolly
Transport dolly and load to the unloading point or to the next flight of stairs to
continue upwards.
•
5.4. Descending
•
•
Make sure that the stairway is secured and no person can enter the stairway.
To descent the stairrobot down the stairway the loaded stairrobot has to be first
driven onto the dolly, as previously described for ascending
•
•
Move the loaded stairrobot on the dolly with the downward end towards the edge of
the top of the step and stop 10 cm away.
One operator will drive the stairrobot using the control panel while the other operator
will steady the load firmly using a load support strap.
•
•
•
Press the reverse button to drive the robot from the dolly and down the stairs
The up and down button is used to maintain ideal load level
By reversing slowly, 5 cm at a time, and stopping at the ‘point of balance’ the control
operator will be able by pressing the up button gently alter the centre of gravity so as
to lower the reverse end tracks onto the top of the stairs.
•
•
The dolly should be moved aside when the stairrobot is fully on the stairs.
Drive the robot in reverse down the stairs steadying the movement throughout by
using the a load support strap
•
•
Depending on the gradient, the stair robot will ride on the edge of two or three steps
at once. The rubber tracks pressing firmly onto the stairs
On some stairs it may be found that occasionally two of the rubber treads ride on the
stair edge and when the third tread releases it’s grip the stairrobot will move down
suddenly about 2,5 cm until all three treads grip once more. This occurrence should
be expected by the operators and the stair robot should be driven on without a pause
Before arriving at the bottom of the stairs the dolly and the lead on ramp should be
placed in position with the lead on ramp resting on the second or third step.
Drive the stairrobot of the stairs and onto the dolly keeping the ideal load level by
using the up or down button
•
•
•
Transport dolly and load to the unloading point or to the next flight of stairs to
continue downwards.
Page 18 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
5.5. Unloading
Publication: 29-07-04
•
•
Start the procedure by securing the area for unloading. Move the dolly with the
stair robot into the desired position for unloading.
Reverse the Robot of the dolly, fit the loading-ramp into position at the front of the
robot
•
•
Slot the winch into the lifting platform at the rear of the stairrobot
Pull the winch-hawser out and connect it with the load. Disconnect the load from
the lifting platform
•
The load can now be lowered to floor level, one man operating the winch and one
man guiding the load of the ramp onto the floor. While lowering the load the lifting
platform will rise until the platform has reached the same gradient as the loading-
ramp
•
If the load is on the floor the winch and loading ramp can be removed
•
All these techniques should be practised with a light load first
Page 19 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
6 Trouble shooting chart
The stairrobot SR 1750 HE is designed and built to function for several years with little
maintenance. In case a problem occurs please make the following checks. If the problem
continues to exist please contact your local dealer
Symptom
Possible course
Solution
•
•
Main motor does
not work
•
•
No current
No current
•
•
•
Check electrical wires
and connections
Check magneto
switches
Check capacitors
Hydraulic pump-
motor does not
work
•
•
•
Check electrical wires
and connections
Check magneto
switches
Check capacitors
•
•
•
Main motor stops
•
•
•
Motor overheated
Motor overheated
Possible oil-shortage
•
•
•
Wait several minutes
Wait several minutes
Hydraulic pump-
motor stops
Hydraulic platform
does not lift
completely
Refill oil with spindle oil;
check oil in oil-tank;
should be 5 mm under
the top of the tank
•
Hydraulic platform
does not go down
•
•
Pressure relieve valve
Electro-magneto switch
does not work properly
•
•
Open valve by turning it
counter clockwise,
move the platform up
and down a few times;
adjust the valve to the
weight of the load
Check electrical wiring
and connections
Page 20 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
Symptom
Possible course
Solution
•
•
Oil leaks from
hydraulic ram
•
•
Ram packing worn
Plunger bent
•
•
Replace o-ring and
back-up ring with repair
set
Hydraulic platform
does not move up
•
Under pressure in
hydraulic system
Remove the wood
plate of the lifting
platform and unscrew
the valve on the oil-
tank pipe; move the
platform in up position
by hand and turn valve
screw tight
Page 21 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
7 Track replacement
•
•
•
•
Loosen both bolts a1 and a2
Turn bolts b1 and b2 counter clockwise until the axle is at point d
Remove track at point C
To install the new track, reverse the above procedure
Drawing (1.)
Drawing (2.)
•
After replacing tracks make sure that the > marks on both tracks are in
tthe same direction and position
Page 22 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
•
•
Proper track tolerance at point F is +/- 10 mm (pulled by hand) drawing (3.)
Make sure that the distances A1 ….A4 are equal on both sides of the
Stairrobot (drawing 4)
Drawing (3.)
Drawing (4.)
Page 23 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
8 Electrical system
Page 24 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
9 Hydraulic system
Publication: 29-07-04
Page 25 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
10. Parts
Publication: 29-07-04
Page 26 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
10.1. Parts list
Art.nr.:
Article
175.001A
175.001B
175.002
175.003
175.003B
175.007
175.008
175.009
175.011
175.012
175.013
175.014
175.015
175.016
175.017
175.018
175.019
175.020
175.021
175.022
175.023
175.024
175.032
175.033
175.040
175.041
175.042
175.043
175.044
175.045
175.046
175.050
175.051
175.077
175.100
175.101
175.102
175.103
175.104
175.105
Main motor
Gearbox
Hydro-motor
Hydro-pump
Oil-seal hydro pump
4-button switch unit
Magneto switch
Transformer 220V/24V
Oil tank
Caterpillar wheel Rear
Caterpillar wheel Front
Front axle
Rear axle
Drive axle
Gearwheel 11 T
Gearwheel 38 T
Gearwheel 20 T
Bearing axle 30
Bearing axle 20
Lock ring
Teflon 303635
Teflon304030
Bearing holder
Teflon ring 51312
Top cross beam
Bottom cross beam
Hydro-ram
Filter
Relief valve
Main selector valve
Electro-unit
Capacitor 8uf
Capacitor 100 uf
Hydro-pipe set
Caterpillar track
Dolly
Ramp-board
Turn disk
Winch
Winch-handle
Page 27 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Publication: 29-07-04
11. CD-Rom video
Content:
•
•
•
Stair robot general promotion video (mpeg1)
Instruction video SR 1750 HE (mpeg1)
Instruction video SR 450 (mpeg1)
cd-rom
Page 28 of 28
Download from Www.Somanuals.com. All Manuals Search And Download.
|