JVC Computer Monitor VM 4200 User Manual

PLASMA DISPLAY MONITOR  
INSTRUCTIONS  
VM-4200  
MENU INPUT  
LCT1499-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTIONS  
Model  
Thank you for purchasing this JVC Monitor.  
Before using the monitor, read this manual carefully so  
that you know how to use the Monitor correctly.  
Refer to this manual whenever questions or problems  
about operation arise. Be sure to read and observe the  
safety precautions.  
VM-4200  
Keep this manual where the user can see it easily.  
* Installation and removal require special expertise.  
Consult your product dealer for details.  
* This monitor does not have the following input terminalsVIDEO A, VIDEO B, and  
COMPONENT/RGB B. To input video, S-video, and component signals, you need to install  
video input unit (IF-C42P1G), which is separately purchased.  
Ask your dealer to install the video input unit.  
Contents  
Page  
Page  
Safety Precautions .................................................... 2  
Parts Identification .................................................... 4  
• Remote Control ................................................... 4  
• Monitor: Front View ............................................. 5  
• Monitor: Rear Views ............................................ 6  
Other Convenient Functions ................................... 24  
• Showing On-screen Display .............................. 24  
• Confirming the Use Time .................................. 25  
• Showing the On-screen When Changing  
the Input Mode .................................................. 25  
• Prohibiting the Monitor’s Button Operations...... 26  
• Setting the Remote-Controllable Input .............. 27  
• Setting the High-Definition Signal Types ........... 27  
• Setting the Clock and the Power On/Off  
Timer ................................................................. 28  
• Using the Pixel Shift Function ........................... 29  
• Using the Power Save Function ........................ 29  
• Preventing the Afterimage Effect ...................... 30  
• Refreshing the Screen ...................................... 31  
• Checking the Timer Battery............................... 32  
• Resetting All the Setup Menu Settings ............. 33  
• Resetting All the Menu Settings ........................ 33  
Preparations.............................................................. 8  
• Checking the Accessories................................... 8  
• Installing the Batteries......................................... 8  
• Attaching the Ferrite Core ................................... 8  
Installation ................................................................. 9  
• Precautions ......................................................... 9  
Connections ............................................................ 10  
• Precautions ....................................................... 10  
• Available Signals ............................................... 10  
• Connection Diagrams ....................................... 11  
Basic Operations..................................................... 14  
• Daily Operations ............................................... 14  
• Changing the Aspect Ratio ............................... 15  
Menu Classifications ............................................... 34  
• Main Menu ........................................................ 34  
• Setup Menu....................................................... 36  
Video Adjustments .................................................. 16  
• Adjusting the Picture Quality ............................. 16  
• Adjusting the Screen Size and Position ............ 17  
• Adjusting the Color Temperature....................... 19  
• Adjusting the White Balance ............................. 19  
• Changing the Aspect Ratio ............................... 21  
• Setting the Receivable Signal Types ................. 21  
• Setting the COMPONENT/RGB B Input ........... 22  
• Changing the Resistance of the RGB B Input  
Terminals........................................................... 23  
Troubleshooting ....................................................... 38  
• Self-diagnostic Indication .................................. 39  
Specifications .......................................................... 40  
Resetting the Function Selection Menu Settings.. 23  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
EUROPE EMC STANDARD NOTICE  
Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the  
user may be required to take adequate measure.  
IMPORTANT INFORMATION  
WARNING:TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS  
APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO  
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE  
APPARATUS.  
IMPORTANT SAFEGUARDS  
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure  
your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE  
HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for  
its installation, use and service. Please read these “Important Safeguards” carefully before use.  
– All the safety and operating instructions should be read before the product is operated.  
– The safety and operating instructions should be retained for future reference.  
– All warnings on the product and in the operating instructions should be adhered to.  
– All operating instructions should be followed.  
– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp  
cloth for cleaning.  
– Use a vacuum cleaner to get rid of the dust around the intakes (all the  
openings) on the rear. If a vacuum is not available, use a cloth and wipe it off.  
Failure to do so will cause internal heat buildup and, therefore, cause damage  
to the product.  
– Do not use attachments not recommended by the product manufacturer as they  
may be hazardous.  
– Do not use this product near water. Do not use immediately after moving from a  
low temperature to high temperature, as this causes condensation, which may  
result in fire, electric shock, or other hazards.  
– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or  
adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions,  
and should use a mount recommended by the manufacturer.  
– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and  
uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing  
possible injury to the operator.  
– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the  
product and protect it from overheating. These openings must not be blocked or covered. (The openings  
should never be blocked by placing the product on bed, sofa, rug, or similar surface. It should not be placed in a built-in  
installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have  
been adhered to.)  
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance  
more than 10 cm.  
– This product should be operated only with the type of power source indicated on the label. If you are not sure of the  
type of power supply to your home, consult your product dealer or local power company.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or  
against them.Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.  
For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods  
of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to  
lightning and power line surges.  
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a  
risk of fire or electric shock.  
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short  
out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.  
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages  
and other hazards. Refer all service to qualified service personnel.  
Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:  
a)When the power supply cord or plug is damaged.  
b)If liquid has been spilled, or objects have fallen on the product.  
c) If the product has been exposed to rain or water.  
d)If the product operated normally by following the operating instructions. Adjust only those controls that are covered  
by the Operation Manual, as an improper adjustment of controls may result in damage and will often require  
extensive work by a qualified technician to restore the product to normal operation.  
e)If the product has been dropped or damaged in any way.  
f) When the product exhibits a distinct change in performance this indicates a need for service.  
When replacement parts are required, be sure the service technician has used replacement parts specified by the  
manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
The product should be placed more than 30 cm away from heat sources such as radiators, heat registers, stoves, and  
other products (including amplifiers) that produce heat.  
When connecting other products such as VCRs, and personal computers, you should turn off the power of this product  
for protection against electric shock.  
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that  
present special hazards when over heated.  
Use only the accessory cord designed for this product to prevent shock.  
Do not touch the handles on the rear soon after many hours of continuous use.They are so hot and will cause a burn on  
the hand. If you need to touch the handles, for example, to move the product, wait until the handles are cooled enough.  
Option terminal: This terminal is intended exclusively to be used to drive the fan motor.  
Do not connect any plugs to the terminal other than JVCs recommended optional parts.  
Polarity of terminal  
POWER CONNECTION  
The power supply voltage rating of this product is AC 220 240 V.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Identification  
Remote Control  
1
2
RM–C579 REMOTE CONTROL UNIT  
RM–C579 REMOTE CONTROL UNIT  
OFF  
POWER  
ON  
3
4
OFF  
POWER  
ON  
DISPLAY  
ASPECT  
DISPLAY  
ASPECT  
INPUT SELECT  
9
p
COMPO.  
A
/(RGB B)  
VIDEO  
B
INPUT SELECT  
RGB A  
COMPO.  
MUTING  
VOLUME  
A
/(RGB B)  
5
6
VIDEO  
B
RGB A  
MUTING  
VOLUME  
MENU/EXIT  
7
8
MENU/EXIT  
1 Remote control cable jack (page 11)  
6 MUTING button (page 14)  
Connect the remote control cable (not supplied) when  
using this remote control as a wired remote control.  
Use this button to turn off the volume immediately.  
Pressing the button again will resume the previous  
volume level.  
2 Remote signal transmission window  
7 2 / 3 / 5 / buttons  
Use these buttons to select menu items or make  
adjustments.  
3 POWER ON/OFF button (page 14)  
Use this button to turn on/off the Monitor.  
4 DISPLAY button (page 14)  
8 MENU/EXIT button  
Use this button to display the input terminal, color system  
(for VIDEO A or VIDEO B input), scan system (for  
COMPONENT input) and horizontal/vertical frequency  
(for RGB A and RGB B input).  
Use this button to display or erase menus.  
While a sub-menu is displayed, pressing this button will  
move you one screen back to the preceding menu.  
Pressing the button again will make the display disappear.  
9 ASPECT button (page 15)  
Use this button to switch between aspect ratios. Each time  
you press the button, the aspect ratio changes as follows:  
5 INPUT SELECT (VIDEO A, VIDEO B, COMPO./(RGB B) and  
RGB A) buttons  
REGULAR  
FULL  
(page 14)  
PANORAMIC  
ZOOM  
Use these buttons to switch between inputs.  
To select the COMPONENT or RGB B input, you have to  
set “RGB/COMPO.” correctly on the menu (see page 22).  
p VOLUME + / – buttons (page 14)  
Use these buttons to adjust the volume level.  
• Only RGB A input can be used without the video input  
unit.  
• The VOLUME – button can be also used to display the  
Setup Menu (see page 25).  
To reproduce images through the other inputs, you need  
to install video input unit (IF-C42P1G), which is  
separately purchased.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor: Front View  
1
2
MENU INPUT  
MENU INPUT  
3
4
5
6
Bottom View  
1 Remote sensor/power lamp  
5 INPUT button (page 14)  
Point the front end of the wireless remote control toward  
here.  
When the Monitor is turned on, the power lamp glows  
Use this button to switch between inputs.  
To select the COMPONENT or RGB B input, you have to  
set RGB/COMPO.correctly on the menu (see page 22).  
Only RGB A input can be used without the video input  
unit.  
green. It glows orange in standby mode.  
2 Self-diagnostic lamps (page 39)  
These lamps light/flash if something abnormal occurs  
with the Monitor.  
To reproduce images through the other inputs, you need  
to install video input unit (IF-C42P1G), which is  
separately purchased.  
3 2 / 3 / 5 / buttons  
6
button (page 14)  
Use these buttons to select menu items and to make  
adjustments.  
Use this button to turn on and off the Monitor.  
When no menu is displayed, you can use the 2 / 3  
buttons to adjust the volume level.  
4 MENU button  
Use this button to display or erase menus.  
While a sub-menu is displayed, pressing this button will  
move you one screen back to the preceding menu.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Identification  
(Continued)  
Monitor: Rear Views  
6
7
9
L
(
(
9
R
EXTERNAL  
INTERNAL  
8
1
2
3
4
5
OUT  
AUDIO  
IN  
L
MAKE  
WIRED  
R
RS-232C  
REMOTE  
POWER  
RGB A  
AUDIO  
AC IN  
1 RGB A input terminals (page 11)  
D-sub, 15 pin  
3 AUDIO OUT terminals (pin jack) (page 11)  
Connect to the audio input terminals of external  
equipment such as an amplifier.  
Connect to the video output terminal of a personal  
computer.  
4 AC IN terminal (page 11)  
AUDIO IN (stereo mini jack)  
Connect to the audio output terminal of a personal  
computer.  
Connect the supplied power cord to this terminal.  
5 POWER switch (page 14)  
Setting this switch to | (on)will put the Monitor into  
standby mode, allowing you to turn on and off the power  
2 REMOTE terminals (pages 11 and 13)  
RS-232C (D-sub, 9 pin)  
using the POWER or  
button either on the remote  
Connect to the RS-232C terminal of a personal computer.  
For the control method using this terminal, consult an  
authorized JVC dealer.  
control or on the Monitor.  
6 OPTION terminal  
MAKE terminal (mini DIN 4pin)  
Connect an external control unit. (See page 13.)  
This terminal cannot be used.  
7 SPEAKER OUT L/R terminals (page 11)  
Connect external speakers, such as unique JVC speakers  
(not supplied), etc.  
WIRED terminal (stereo mini jack)  
Connect a wired remote control unit to this terminal.  
Note:  
When the above three terminals are used at the same  
time, transmitted commands through the MAKE  
terminal have priority over those through the other  
terminals.  
8 INTERNAL/EXTERNAL (built-in speaker/external  
speaker) selecting switch (page 11)  
INTERNAL:  
EXTERNAL:  
To use built-in speakers.  
To use external speakers.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note:  
* The terminals on this page are optional. To input  
video, S-video, and component signals, you need  
to install video input unit (IF-C42P1G), which is  
separately purchased.  
9
p
q
VIDEO  
AUDIO  
L/MONO  
VIDEO  
AUDIO  
L/MONO  
AUDIO  
L/MONO  
VIDEO  
R
R
R
Y/G  
Pb/B  
Pr/R  
HD/Cs  
VD  
IN  
OUT  
IN  
Y/C IN  
VIDEO A  
VIDEO B  
COMPONENT/RGB B  
9 VIDEO A terminals (page 12)  
AUDIO (L/MONO, R) input terminals (pin jack)  
q COMPONENT/RGB B input terminals (page 12)  
AUDIO (L/MONO, R) input terminals (pin jack)  
Connect these terminals to the audio output terminals of  
the other equipment.  
Connect these terminals to the audio input terminals of a  
VCR, etc.  
VIDEO IN terminal (BNC)  
Connect this terminal to the video output terminal of a  
VCR, etc.  
G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC)  
Connect these terminals to the following output  
terminals of a personal computer or other equipment:  
Analog RGB signal output terminals  
Horizontal sync (HD) signal or composite (Cs) signal  
output terminal  
VIDEO OUT terminal (BNC)  
Connect this terminal to the video input terminal of  
another Monitor.  
Vertical sync (VD) signal output terminal  
Note:  
Notes:  
Since the video output terminals on this Monitor are  
loop-through terminals, the devices connected to this  
video output terminal should be correctly terminated.  
Otherwise, pictures become abnormally bright or the  
Monitor screen gets affected abnormally.  
External sync signals are automatically detected when  
they come in.  
When both horizontal (HD)/vertical (VD) sync and  
composite (Cs) sync are connected, HD/VD sync signals  
will be used.  
p VIDEO B terminals (page 12)  
Y, Pb, Pr (VIDEO) input terminals (BNC)  
Connect these terminals to the component signal output  
terminals of NTSC or high-vision equipment.  
AUDIO (L/MONO, R) input terminals (pin jack)  
Connect these terminals to the audio output terminals of  
a VCR, etc.  
Y/C (S video) IN terminal (mini DIN 4pin)  
Connect this terminal to the S-video output terminal of a  
VCR, etc.  
Note:  
When these terminals are used as the component  
terminals (Y, Pb, Pr)see Setting the COMPONENT/  
RGB B Inputon page 22, external sync signals (HD/Cs,  
VD) cannot be used.  
VIDEO IN terminal (pin jack)  
Connect this terminal to the video output terminal of a  
VCR, etc.  
Note:  
When both the video and S-video terminals are  
connected, the S-video terminal will have priority.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Checking the Accessories  
The following accessories are included with the Monitor. Check for them. If any item is missing, please contact the dealer where  
you purchased the Monitor.  
Remote control (RM-C579) x 1  
Power cord x 2 (Use the one matching the wall outlet.)  
Batteries (AA/R6P) x 2  
Ferrite core x 1  
Installing the Batteries  
Put the batteries in the remote control as follows. If the remote control has become erratic in operation, change the batteries.  
1 Remove the back cover.  
While pushing the release lever on the cover, remove the cover in  
the direction of the arrow.  
2 Place the batteries.  
Put the two supplied batteries (AA/R6P), noting the ª and ·  
markings, as shown.  
3 Replace the back cover as illustrated.  
Make sure the release lever on the cover is locked in place correctly.  
Precautions for using batteries  
If batteries are used improperly, the liquid could leak out, causing a fire, injury, etc. or dirtying the vicinity.  
Take notice of the following:  
Do not mix old and new batteries.  
Do not mix different types of battery as different types may have different  
characteristics.  
Place the batteries according to the ª and · markings indicated on the battery  
compartment.  
When installing the batteries, insert the · end first to avoid a short circuit.  
Use only the specified batteries.  
When you are not using the remote control for a long time, remove the batteries.  
When the batteries have reached the end of their life, replace them with new ones  
immediately. Otherwise, the liquid may leak out, or malfunction may be caused by  
the leaked liquid. If the leaked liquid contacts your skin, wipe off the liquid with a  
soft cloth. If the affected skin is left as is, you may get a rough skin.  
The instruction below applies  
only to the use in Holland.  
Gebruike batterijen:  
Do not throw the batteries into fire or try recharging them.  
The service life of batteries is six months to one year for normal use. The supplied  
batteries are only for checking the operation and their life may be shorter. When  
the remote control operation becomes erratic, replace with new batteries.  
Attaching the Ferrite Core  
Attach the ferrite core to the power cord. Using the power cord without the ferrite core may lead to noise (interference). Open  
the ferrite core, insert the power cord and close the ferrite core. Attach the ferrite core to the AC IN end of the power cord.  
Ferrite core *  
Plug to AC IN  
Power cord  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Precautions  
When installing the Monitor, be sure to use a dedicated Stand Unit, Wall Mounting Unit, or Monitor Hanger Unit, depending  
on a particular case. Ask your dealer for installation.  
When installing the Monitor, refer also to the user manual for each option to use. Do not tilt the Monitor rightward, leftward,  
or backward.  
Route the power cord and connection cables along wall or floor corners to avoid walking on them.  
For good heat dissipation, try to leave the following distances of space (minimum) around the Monitor.  
The ambient temperature of the installation place should be within the range of 0˚C to 40˚C (slightly variable depending on  
ambient conditions for installation.)  
When installing the Monitor in a place, such as near the ceiling, the remote control may not work correctly because of possible  
effects from the surroundings. If this happens, use the remote control as a wired remote control or move the Monitor where it  
is free from these effects.  
When installing the Monitor on a stand  
Front View  
Side View  
200  
50  
Wall  
150  
150  
MENU INPUT  
50  
Unit: mm  
Take measures against the Monitor from overturning:  
To protect against abnormal events such as earthquakes and to prevent unexpected accidents, take appropriate measures  
for preventing the Monitor from overturning; should it overturn, this could lead to personal injury.  
For detailed information, refer to the manual supplied for the stand.  
When mounting the Monitor on the wall  
When hanging the Monitor from the ceiling  
Front View  
Side View  
Side View  
200  
200  
100  
100  
MENU INPUT  
50  
50  
Unit: mm  
100  
Unit: mm  
Notes:  
Do not allow the same image (pattern) to be continuously displayed on the screen for a long time; otherwise, the area on the  
screen corresponding to the image may vary in brightness, leaving an afterimage on the screen. To reduce the afterimage, you  
can use the Refresh function (see page 31).  
The Monitor is manufactured using very high-precision technology, allowing for more than 99.99% active pixels, however, be  
aware that only a slight number of pixels may be deficient or lit at all times.  
Do not install the Monitor in such a way that the Monitor and other AV equipment affect each other adversely. (For example,  
if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change  
the installation place.)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Precautions  
Before making connections, turn off all the equipment.  
Plugs should be firmly inserted; poor connection could cause noise.  
To unplug a cord, be sure to grasp its plug and pull it out.  
Connect the power cord after having finished all other connections.  
Refer also to the user manual of each piece of equipment.  
Available Signals  
Video signals  
The following signals can be input to this Monitor:  
VIDEO A and VIDEO B terminals accept PAL, PAL60, NTSC, NTSC4. 43, and SECAM signals.  
COMPONENT/RGB B terminals accept 480i, 576i, 480p, 576p, 720/60p, 1080/50i, and 1080/60i (1035/60i) signals. You  
need to set RGB/COMPO.to COMPO.on the menu (see page 21).  
(To input the above signals, you need to install the video input unit (IF-C42P1G), which is separately purchased.)  
Computer signals (Preset)  
This Monitor has 18 preset video modes for the most popular industrial standard, and the signals of the following image  
resolutions can be input to the RGB input terminals.  
Screen resolution  
Horizontal  
Horizontal  
Frequency (kHz) Frequency (Hz)  
Vertical  
No.  
Signal name  
Scan system  
Vertical  
1
2
PC98  
640  
640  
640  
640  
640  
852  
640  
800  
800  
800  
800  
1024  
1024  
1024  
1024  
1152  
400  
400  
480  
480  
480  
480  
480  
600  
600  
600  
600  
768  
768  
768  
768  
864  
24.8  
31.5  
31.5  
31.7  
37.5  
31.7  
35.0  
35.2  
37.9  
48.1  
46.9  
48.4  
56.5  
60.0  
68.7  
67.5  
15.7  
15.6  
56.4  
70.1  
59.9  
72.8  
75.0  
60.3  
66.7  
56.3  
60.3  
72.2  
75.0  
60.0  
70.1  
75.0  
85.0  
75.0  
59.9  
50.0  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Non-interlace  
Interlace  
VGA400-70  
VGA480-60  
VGA480-72  
VGA480-75  
WVGA-60  
MAC13”  
SVGA-56  
SVGA-60  
SVGA-72  
SVGA-75  
XGA-60  
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
XGA-70  
XGA-75  
XGA-85  
XGA+-75  
RGB15K-60  
RGB15K-50  
Interlace  
Notes:  
When a signal other than listed above is input, a part of the screen may become void or an unnecessary picture may appear.  
Signals, though they are within the acceptable range of frequencies, may not be displayed normally, depending on the signal  
type.  
Depending on the connected equipment, the Monitor may not be compatible with composite sync (Cs) or G on sync signals.  
When a preset mode signal is input, the vertical frequency displayed on the screen will have an *shown at its right top  
position.  
When the No. 6 signal is input, change the aspect ratio to FULLwith the ASPECT button (page 15) on the remote control or  
from the FUNCTION SELECTmenu (page 21).  
When No. 8 to No. 16 signals are input, thin lines may become obscure for their signal frequencies are higher than the screen  
resolution.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Diagrams  
Typical connections  
For connection, see page 13.  
Personal computer  
Personal computer  
(used as the playback source)  
(used to control the Monitor)  
Remote control  
(supplied)  
M E N U / E X I T  
Amplifier, etc.  
O
V L U M E  
M U T I N G  
V I D E O  
R G B  
A
B
A
B )  
.
/ ( R C G O B M P O  
I N P U T S E L E C T  
A S P E C T  
Y
D I S P L A  
O F F  
O N  
W O E R  
P
N U I T  
L
O
C O N  
T
T
E
R
R E M O C 5 7 9 R M  
Cable with stereo  
mini jacks  
(not supplied)  
Power cord (supplied)  
To a wall outlet  
Ferrite core (supplied)  
Make sure to attach the ferrite core to  
the power cord. See also page 8.  
OUT  
AUDIO  
IN  
L
MAKE  
R
RS-232C  
WIRED  
REMOTE  
RGB A  
AUDIO  
AC IN  
POWER  
External speaker connection  
External speakers  
(Ex. TS-C421SPG)  
ª
·
·
ª
To speaker input terminals  
To speaker input terminals  
When using external speakers,  
set this to EXTERNAL.  
Note:  
How to connect the cords  
It is recommended to use the speaker unitTS-C421SPG (not supplied)  
as the external speakers. You can also connect any speakers of the  
following specifications:  
Impedance: Between 6 and 8 Ω  
Power handling capacity: More than 3 W  
Caution:  
Do not short-circuit the 9 and ( speaker cords each other. (Refer  
also to the instructions supplied with the speaker unit when  
connecting speakers.)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
(Continued)  
The terminals on this page are optional. To input video, S-video, and component signals,  
you need to install video input unit (IF-C42P1G), which is separately purchased.  
AV connections  
VCR 1  
DVD player, etc.  
VCR 2  
(used as the playback source)  
(used as the playback source)  
(used as the playback source)  
VIDEO  
VIDEO  
AUDIO  
AUDIO  
AUDIO  
VIDEO  
L/MONO  
L/MONO  
L/MONO  
R
R
R
Y/G  
Pb/B  
Pr/R  
HD/Cs  
VD  
IN  
OUT  
IN  
Y/C IN  
VIDEO A  
VIDEO B  
COMPONENT/RGB B  
When connecting another PC to the COMPONENT/RGB B terminals, set the RGB/COMPO.setting to RGB”  
(see page 22).  
To audio output  
To G output  
To B output  
Personal computer  
To R output  
(used as the playback  
source)  
To HD/Cs output  
To VD output  
Notes:  
You can connect another VCR or Monitor to the VIDEO A OUT terminal. However, when connecting a VCR to the  
VIDEO A terminals, do not connect both IN and OUT terminals to the same VCR.  
When connecting a VCR to the VIDEO B terminals, you can use either the video or S-video terminals. If the both  
terminals are used, S-video terminal will have priority.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting an external control unit  
When connecting the external control unit to the MAKE terminal, you can operate the following functions through the  
MAKE terminal;  
Turn on or off the Monitor.  
Preparation: The POWER switch on the rear must be set to | (on)(so that the Monitor is in standby mode).  
Select the input.  
Preparation: REMOTE SWITCHshould be set correctly to select your desired input (see page 27).  
Notes:  
There is no remote control on/off switch. When a plug is inserted to the MAKE terminal, remote control through the  
external control unit is automatically activated.  
When the other REMOTE terminals are used at the same time, transmitted commands through the MAKE terminal have  
priority over those through the other terminals.  
MAKE terminal  
External control unit  
Pin number Signal name  
Signals  
transmitted  
6
4
2
5
3
1
1
2
3
4
5
6
GND  
GND  
TTL level  
SW2  
=
=
=
H: Power Off  
H: Input A*  
L: Power On  
SW1  
L: Input B*  
SW DET  
GND  
H: Not connected  
L: Connected  
*
Input A and Input B will be determined by the REMOTE  
SWITCHsetting.  
IMPORTANT:  
External control unit is not commercially available in the market. When you need it, consult your dealer.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Daily Operations  
1 Turn on the main power.  
Set POWER on the back of the Monitor to | (on).  
The POWER lamp on the upper left of the front panel  
glows orange.  
Rear View  
2 Turn on the power.  
Press POWER ON on the remote control to turn the power  
on.  
The POWER lamp changes to glow green.  
You can also use the  
button on the front panel  
(lower right) to turn on the Monitor.  
3 Select an input.  
You can select only RGB A without the video input  
unit (IF-C42P1G).*  
Select the desired input by pressing INPUT SELECT  
(VIDEO A, VIDEO B, COMPO./(RGB B) and RGB A).  
You can also select the input by pressing INPUT on the  
Monitor. Each time you press the button, the input  
mode changes in sequence.  
1
POWER  
VIDEO A  
VIDEO B  
RGB A  
COMPONENT or RGB B  
Ex. When selecting VIDEO Ainput  
VIDEO  
NTSC  
A
Input selected  
Input video signal  
RMC579 REMOTE CONTROL UNIT  
Note:  
To select COMPONENTor RGB B,you need to set the  
RGB/COMPO.setting correctly.  
OFF  
POWER  
ON  
2
4
DISPLAY  
ASPECT  
DISPLAY  
4 Adjust the volume.  
INPUT SELECT  
COMPO.  
:
10  
VOLUME  
A
/(RGB B)  
+
3
VIDEO  
B
RGB A  
Note:  
MUTING  
VOLUME  
While no menu is displayed, you can adjust the volume by  
pressing 2 / 3 on the Monitor.  
MUTING  
To turn off the volume immediately  
Press MUTING.  
MUTING ONis displayed, and the sound goes out.  
Pressing the button again resumes the previous volume level.  
MENU/EXIT  
To make the screen indication appear  
Press DISPLAY.  
The types of input and signal are indicated on the screen for  
about 3 seconds.  
You can also make the screen indication appear using menus  
(page 24).  
* You need to install the video input unit (IF-C42P1G), which  
is separately purchased, to select VIDEO A,” “VIDEO B,”  
and COMPONENT (or RGB B)as the input.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Aspect Ratio  
With this Monitor, you can select among three types of wide  
screens (FULL, ZOOM, and PANORAMIC) in addition to the  
REGULAR screen of conventional 4:3 aspect ratio.  
Press ASPECT to select the screen size.  
Each time you press the button, the screen size changes as  
follows:  
RMC579 REMOTE CONTROL UNIT  
REGULAR  
FULL  
PANORAMIC  
ZOOM  
OFF  
POWER  
ON  
DISPLAY  
ASPECT  
REGULAR:  
Displays at conventional 4:3 aspect ratio.  
ASPECT  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
VIDEO  
B
RGB A  
MUTING  
VOLUME  
FULL:  
REGULAR size display is enlarged  
horizontally.  
MENU/EXIT  
ZOOM:  
REGULAR size display is enlarged  
vertically and horizontally at the same ratio.  
PANORAMIC:  
REGULAR size display is enlarged  
horizontally to the extent that the picture  
does not look abnormally.  
Precautions for using the screen mode switching function  
This Monitor features a screen mode switching (aspect ratio  
change) function. If you select a mode different in aspect  
ratio from software such as TV programs, the picture may  
look different from original picture. Be aware of this point  
when you are selecting a screen mode.  
If you select a wide screen mode while viewing  
conventional video programs of the aspect ratio 4:3, some  
portions (edges) of the original picture will be cut off, or  
deformed. To enjoy the original picture as it is, select  
REGULARwhile viewing such programs.  
If you place the Monitor in a tea room, hotel, etc. for  
business purposes or public viewing and modify the picture  
by using the screen mode switching (aspect ratio change)  
function, this could violate the copyright protected by the  
copyright law, which requires your special attention.  
If you make the screen very bright and watch programs  
selecting REGULAR,for a long period of time, the  
Monitor screen may happen to be burned in. If this occurs,  
watching programs using a wide screen mode for a while  
will reduce the burn-in gradually.  
Notes:  
When one of the following signals is being input, you  
cannot select the aspect ratio you want.  
I 1080/50i, 1080/60i, 1035/60i or 720/60p signal through the  
COMPONENT/RGB B input terminals  
You can only select FULL.  
I When any signal other than RGB15K-60 and RGB15K-50  
through the RGB A or COMPONENT/RGB B input terminals  
You can select only REGULAR and FULL.  
The aspect ratio can also be changed on the Function  
Selection Menu (page 21).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Adjustments  
For video adjustments, use menus.  
You can use the buttons either on the remote control or on  
Monitor for menu operations.  
Refer also to Menu Classificationson pages 34 and 36.  
Adjusting the Picture Quality  
Picture quality can be set for each input mode.  
1 Press MENU/EXIT (or MENU on the  
Monitor) to display the Main Menu.  
MENU INPUT  
MAIN MENU  
PICTURE ADJ.  
Cursor (3)  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
MENU INPUT  
ENTER:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
PICTURE ADJ.”  
5
5 /  
MENU  
2 / 3  
3 Press 3 to display the Picture  
Adjustment Menu.  
VIDEO  
A
PICTURE ADJ.  
:
:
:
:
:
+01  
00  
02  
00  
00  
CONTRAST  
BRIGHT  
CHROMA  
PHASE  
SHARPNESS  
sub menu  
reset  
ADJUST:  
SELECT:  
EXIT: MENU  
4 Press 5/to move the cursor (3) to the  
item you want to adjust.  
RMC579 REMOTE CONTROL UNIT  
Item  
Adjustment  
range  
Standard  
(Reset)  
OFF  
POWER  
ON  
DISPLAY  
ASPECT  
CONTRAST  
20 to +20  
+10  
0
INPUT SELECT  
BRIGHT (brightness) 20 to +20  
COMPO.  
A
/(RGB B)  
CHROMA*1  
PHASE*2  
20 to +20  
20 to +20  
10 to +10  
0
VIDEO  
B
RGB A  
0
MUTING  
VOLUME  
SHARPNESS  
sub menu  
0
See To make an adjustment  
while viewing the adjustment  
baron the next page.  
2 / 3  
5 /  
5
reset  
See To reset the adjustmentson  
the next page.  
MENU/EXIT  
MENU/EXIT  
*1 Adjustable when viewing the NTSC, PAL or SECAM  
signal, or component signal.  
*2 Adjustable when viewing the NTSC signal or  
component signals.  
5 Press 2/3 to make adjustments.  
6 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit from the menu  
operations.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To make an adjustment while viewing the adjustment  
3 Press 3 to display the Size/Position  
bar  
Adjustment Menu.  
After step 3 on page 16, proceed as follows:  
SIZE/POSITION ADJ.  
1 Press 5/to move the cursor (3) to sub menu.”  
2 Press 3 to display the Sub Menu.  
The Sub Menu for CONTRAST appears on the screen.  
H
H
V
V
SIZE  
POSITION  
SIZE  
:
:
:
:
:
:
+01  
00  
02  
00  
00  
POSITION  
DOT CLOCK  
CLOCK PHASE  
sub menu  
reset  
*
00  
:+01  
CONTRAST  
+
ADJUST:  
SELECT:  
EXIT: MENU  
* Appearing and being adjustable only when you use RGB A or  
RGB B input.  
3 Press 5/to select the Sub Menu you want to adjust.  
Each time you press the button, the Sub Menu changes as  
follows:  
4 Press 5/to move the cursor (3) to the  
CONTRAST  
SHARPNESS  
4 Press 2/3 to adjust the selected item.  
5 Repeat steps 3 and 4 to adjust the other items.  
6 Press MENU/EXIT (or MENU on the Monitor) three times  
to exit from the menu operations.  
BRIGHT  
CHROMA  
item you want to adjust.  
PHASE  
Item  
Adjustment range  
H (horizontal) SIZE*1 40 to +40  
H POSITION*1  
Varies depending on other  
settings  
To reset the adjustments  
V (vertical) SIZE*1  
V POSITION*1  
40 to +40  
After step 3 on page 16, proceed as follows:  
1 Press 5/to move the cursor (3) to reset.”  
2 Press 3.  
The confirmation screen appears.  
Varies depending on other  
settings  
DOT CLOCK*2  
10 to +10  
20 to +20  
reset  
Are you sure?  
"YES" then  
"NO" then MENU key.  
CLOCK PHASE*2  
key.  
sub menu  
reset  
See To make an adjustment  
while viewing the adjustment  
baron the next page.  
3 Press 3 again to reset the adjustments.  
To cancel the reset, press MENU/EXIT (or MENU on the  
Monitor).  
See To reset the adjustmentson  
the next page.  
Adjusting the Screen Size and Position  
*1 Size and position adjustments are so related that if one  
is adjusted much, the others adjustable range will be  
reduced.  
The screen size and position can be adjusted.  
Adjusted settings can be stored for each signal type; therefore,  
when the same signal comes in, the stored settings are  
recalled.  
When adjusting the size, the size cannot be adjusted  
proportionally, but can be enlarged rightward (or  
downward) only and reduced leftward (or upward) only.  
Therefore, it is necessary to adjust both the size and position  
alternately to adjust to the appropriate size.  
*2 DOT CLOCK is the function to adjust the pixel  
sampling number of the A/D converter to the  
resolution (the vertical pixel number) of the input  
signal.  
CLOCK PHASE is the function to adjust the sampling  
timing (phase) to the phase of the input signal.  
You can use the two functions to reduce flickering and  
blurring on the screen when using the RGB A or RGB  
B input.  
1 Press MENU/EXIT (or MENU on the  
Monitor) to display the Main Menu.  
5 Press 2/3 to adjust the selected item.  
MAIN MENU  
PICTURE ADJ.  
Cursor (3)  
Note:  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
During size and position adjustments, the Monitor  
screen may be distorted. This is normal, but not a  
malfunction of the Monitor.  
ENTER:  
SELECT:  
EXIT: MENU  
6 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit from the menu  
operations.  
2 Press 5/to move the cursor (3) to  
SIZE/POSITION ADJ.”  
(To be continued on the next page)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Adjustments  
(Continued)  
To make an adjustment while viewing the adjustment  
bar  
After step 3 on page 17, proceed as follows:  
1 Press 5/to move the cursor (3) to sub menu.”  
2 Press 3 to display the Sub Menu.  
The Sub Menu for H SIZE appears on the screen.  
:+01  
H
SIZE  
++  
+
+
3 Press 5/to select the Sub Menu you want to adjust.  
Each time you press the button, the Sub Menu changes as  
follows:  
MENU INPUT  
H SIZE  
H POSITION  
V SIZE  
DOT CLOCK  
CLOCK PHASE  
V POSITION  
MENU INPUT  
4 Press 2/3 to adjust the selected item.  
5 Repeat steps 3 and 4 to adjust the other items.  
6 Press MENU/EXIT (or MENU on the Monitor) three times  
to exit from the menu operations.  
To reset the adjustments  
After step 3 on page 17, proceed as follows:  
1 Press 5/to move the cursor (3) to reset.”  
2 Press 3.  
5
5 /  
MENU  
2 / 3  
The confirmation screen appears.  
reset  
Are you sure?  
"YES" then  
key.  
"NO" then MENU key.  
3 Press 3 again to reset the adjustments.  
RMC579 REMOTE CONTROL UNIT  
To cancel the reset, press MENU/EXIT (or MENU on the  
Monitor).  
OFF  
POWER  
ON  
Note:  
DISPLAY  
ASPECT  
Adjustment values for both horizontal and vertical sizes of  
the screen are so related that if one is adjusted up to near  
the maximum value, the attainable value of the other will  
be decreased.  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
VIDEO  
B
RGB A  
MUTING  
VOLUME  
2 / 3  
5 /  
5
MENU/EXIT  
MENU/EXIT  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Color Temperature  
Adjusting the White Balance  
The adjusted setting applies to all inputs.  
G GAIN, B GAIN and R GAIN can be finely adjusted  
separately for HIGHand LOWsettings of the color  
temperature.  
1 Press MENU/EXIT (or MENU on the  
Monitor) to display the Main Menu.  
1 On the remote control:  
MAIN MENU  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
PICTURE ADJ.  
Cursor (3)  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
ENTER:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
FUNCTION SELECT.”  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
3 Press 3 to display the Function  
Selection Menu.  
ADJUST:  
SELECT:  
EXIT: MENU  
FUNCTION SELECT  
* appears  
only when you  
have adjusted  
the White  
Balance (see  
the right  
COLOR TEMP.  
ASPECT  
SIGNAL MODE  
RGB/COMPO.  
SYNC TERM.  
reset  
:
:
:
:
:
HIGH  
PANORAMIC  
AUTO  
RGB  
HIGH  
2 Press 5/to move the cursor (3) to  
*
WHITE BALANCE.”  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
ADJUST:  
SELECT:  
EXIT: MENU  
column).  
4 Press 5/to move the cursor (3) to  
COLOR TEMP.”  
3 Press 3 to display the White Balance  
Adjustment Menu.  
5 Press 2/3 to make an adjustment.  
Each time you press the button, the color temperature  
alternates between HIGHand LOW.”  
WHITE BALANCE:HIGH  
R
G
B
GAIN  
GAIN  
GAIN  
:
:
:
000  
001  
002  
+
sub menu  
reset  
HIGH:  
LOW:  
To make the screen become bluish.  
To make the screen become reddish.  
ADJUST:  
SELECT:  
EXIT: MENU  
6 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit from the menu  
operations.  
4 Press 5/to move the cursor (3) to the  
item you want to adjust.  
5 Press 2/3 to adjust the selected item.  
Note:  
To make a fine adjustment, adjust WHITE BALANCE(see  
the right column).  
6 Repeat steps 4 and 5 to adjust the other  
items.  
7 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit from the menu  
operations.  
Notes:  
Adjustable range will vary among the Monitors.  
• “MAXmay appear soon after you begin adjustment. This  
is normal but not a malfunction.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Adjustments  
(Continued)  
To make an adjustment while viewing the adjustment  
bars  
After step 3 on page 19, proceed as follows:  
1 Press 5/to move the cursor (3) to sub menu.”  
2 Press 3 to display the Sub Menu.  
The Sub Menu for R GAIN appears on the screen.  
:
000  
+
R
GAIN  
3 Press 5/to select the Sub Menu you want to adjust.  
Each time you press the button, the Sub Menu changes as  
follows:  
MENU INPUT  
R GAIN  
G GAIN  
B GAIN  
MENU INPUT  
4 Press 2/3 to adjust the selected item.  
5 Repeat steps 3 and 4 to adjust the other items.  
6 Press MENU/EXIT (or MENU on the Monitor) three times  
to exit from the menu operations.  
To reset the adjustments  
After step 3 on page 19, proceed as follows:  
5
5 /  
MENU  
2 / 3  
1 Press 5/to move the cursor (3) to reset.”  
2 Press 3.  
The confirmation screen appears.  
reset  
Are you sure?  
"YES" then  
key.  
"NO" then MENU key.  
RMC579 REMOTE CONTROL UNIT  
3 Press 3 again to reset the adjustments.  
To cancel the reset, press MENU/EXIT (or MENU on the  
OFF  
POWER  
ON  
Monitor).  
DISPLAY  
ASPECT  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
VIDEO  
B
RGB A  
MUTING  
VOLUME  
2 / 3  
5 /  
5
MENU/EXIT  
MENU/EXIT  
1
2
3
*
*
*
SIGNAL MODEappears only when VIDEO A,  
VIDEO B, or COMPONENT input is selected.  
RGB/COMPO.appears only when the RGB B  
or COMPONENT input is selected.  
SYNC TERM.appears only when the RGB B  
input is selected.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Aspect Ratio  
Setting the Receivable Signal Types  
The setting adjusted applies to all inputs.  
You can change the aspect ratio by pressing ASPECT. (See  
page 15.)  
You can set the receivable signal types. Normally, select  
AUTO.”  
A common setting will apply to both the VIDEO A input and  
the VIDEO B input, and a different setting will apply to the  
COMPONENT input.  
1 Press MENU/EXIT (or MENU on the  
Monitor) to display the Main Menu.  
1 Press MENU/EXIT (or MENU on the  
MAIN MENU  
Monitor) to display the Main Menu.  
PICTURE ADJ.  
Cursor (3)  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
MAIN MENU  
PICTURE ADJ.  
Cursor (3)  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
ENTER:  
SELECT:  
EXIT: MENU  
ENTER:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
FUNCTION SELECT.”  
2 Press 5/to move the cursor (3) to  
FUNCTION SELECT.”  
3 Press 3 to display the Function  
Selection Menu.  
3 Press 3 to display the Function  
FUNCTION SELECT  
Selection Menu.  
COLOR TEMP.  
ASPECT  
SIGNAL MODE  
RGB/COMPO.  
SYNC TERM.  
reset  
:
:
:
:
:
HIGH  
PANORAMIC  
AUTO  
RGB  
HIGH  
*
FUNCTION SELECT  
COLOR TEMP.  
ASPECT  
SIGNAL MODE  
RGB/COMPO.  
SYNC TERM.  
reset  
:
:
:
:
:
HIGH  
PANORAMIC  
AUTO  
RGB  
HIGH  
*
ADJUST:  
SELECT:  
EXIT: MENU  
*1 *2 *3  
ADJUST:  
SELECT:  
EXIT: MENU  
4 Press 5/to move the cursor (3) to  
ASPECT.”  
*1 *2 *3  
4 Press 5/to move the cursor (3) to  
SIGNAL MODE.”  
5 Press 2/3 to select an aspect ratio you  
want.  
Each time you press the button, the aspect ratio changes  
as follows:  
5 Press 2/3 to select the receivable video  
signal type.  
REGULAR  
FULL  
Each time you press the button, the receivable video  
signal type changes as follows:  
PANORAMIC  
ZOOM  
* For detailed information on these aspect ratios, see  
page 15.  
When VIDEO A or VIDEO B input is selected:  
AUTO  
PAL60  
NTSC  
N4.43  
PAL  
6 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit from the menu  
operations.  
SECAM  
(NTSC4.43)  
When COMPONENT input is selected:  
AUTO  
480i  
576i  
Note:  
1080i  
(1035i)*  
720p  
480p  
When one of the following signals is being input, you  
cannot select the aspect ratio you want.  
I 1080/50i, 1080/60i, 1035/60i or 720/60p signal through the  
COMPONENT/RGB B input terminals  
Aspect ratio is fixed to FULL (ASPECTwill not appear  
on the display).  
I When any signal other than RGB15K-60 and RGB15K-50  
through the RGB A or COMPONENT/RGB B input terminals  
You can select only REGULAR and FULL.  
* Changes according to the HD SIGNAL MODE”  
setting (see page 27).  
6 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit the menu  
operations.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Adjustments  
(Continued)  
Setting the COMPONENT/RGB B Input  
After connecting the playback device such as a PC or a DVD  
player to the COMPONENT/RGB B terminals, you have to  
specify which type of signal comes into this terminalRGB or  
component signals.  
Without setting RGB/COMPO.correctly, you cannot  
show any picture though you select the COMPONENT or  
RGB B input.  
1 Press MENU/EXIT (or MENU on the  
MENU INPUT  
Monitor) to display the Main Menu.  
MAIN MENU  
PICTURE ADJ.  
Cursor (3)  
MENU INPUT  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
ENTER:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
FUNCTION SELECT.”  
5
5 /  
MENU  
2 / 3  
3 Press 3 to display the Function  
Selection Menu.  
FUNCTION SELECT  
COLOR TEMP.  
ASPECT  
SIGNAL MODE  
RGB/COMPO.  
SYNC TERM.  
reset  
:
:
:
:
:
HIGH  
PANORAMIC  
AUTO  
RGB  
HIGH  
*
RMC579 REMOTE CONTROL UNIT  
OFF  
POWER  
ON  
ADJUST:  
SELECT:  
EXIT: MENU  
*1 *2 *3  
DISPLAY  
ASPECT  
4 Press 5/to move the cursor (3) to  
RGB/COMPO.”  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
VIDEO  
B
RGB A  
5 Press 2/3 to select the type of signal.  
Each time you press the button, the type of signal  
accepted alternates between RGBand COMPO.”  
MUTING  
VOLUME  
RGB:  
When connecting the playback device such as  
a PC, which can emit the RGB signals.  
COMPO.: When connecting the playback device such as  
a DVD player, which can emit the component  
signals.  
2 / 3  
5 /  
5
MENU/EXIT  
MENU/EXIT  
6 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit the menu  
operations.  
1
*
2
*
3
*
SIGNAL MODEappears only when VIDEO A,  
VIDEO B, or COMPONENT input is selected.  
RGB/COMPO.appears only when the RGB B  
or COMPONENT input is selected.  
SYNC TERM.appears only when the RGB B  
input is selected.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resetting the Function Selection Menu Settings  
Changing the Resistance of the RGB B  
Input Terminals  
You can reset all the Function Selection Menu settings at a  
time.  
You can set the resistance of the two of the RGB B input  
terminals to either HIGH (1 k) or LOW (75 ):  
HD/Cs (Horizontal sync/Composite) terminal  
VD (Vertical sync) terminal.  
HIGH is the normal setting. Change the setting to LOW when  
you use a long connecting cord and the picture flickers and  
blurs on the screen.  
1 Press MENU/EXIT (or MENU on the  
Monitor) to display the Main Menu.  
MAIN MENU  
PICTURE ADJ.  
Cursor (3)  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
1 Press MENU/EXIT (or MENU on the  
Monitor) to display the Main Menu.  
ENTER:  
SELECT:  
EXIT: MENU  
MAIN MENU  
PICTURE ADJ.  
Cursor (3)  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
2 Press 5/to move the cursor (3) to  
FUNCTION SELECT.”  
ENTER:  
SELECT:  
EXIT: MENU  
3 Press 3 to display the Function  
Selection Menu.  
2 Press 5/to move the cursor (3) to  
FUNCTION SELECT.”  
FUNCTION SELECT  
COLOR TEMP.  
ASPECT  
SIGNAL MODE  
RGB/COMPO.  
SYNC TERM.  
reset  
:
:
:
:
:
HIGH  
PANORAMIC  
AUTO  
RGB  
HIGH  
*
3 Press 3 to display the Function  
ADJUST:  
SELECT:  
EXIT: MENU  
Selection Menu.  
*1 *2 *3  
FUNCTION SELECT  
COLOR TEMP.  
ASPECT  
SIGNAL MODE  
RGB/COMPO.  
SYNC TERM.  
reset  
:
:
:
:
:
HIGH  
PANORAMIC  
AUTO  
RGB  
HIGH  
*
4 Press 5/to move the cursor (3) to  
reset.”  
ADJUST:  
SELECT:  
EXIT: MENU  
*1 *2 *3  
5 Press 3.  
The confirmation screen appears.  
4 Press 5/to move the cursor (3) to  
SYNC TERM.”  
reset  
Are you sure?  
"YES" then  
"NO" then MENU key.  
key.  
5 Press 2/3 to select the terminal  
6 Press 3 again to reset the adjustments.  
resistance.  
To cancel the reset, press MENU/EXIT (or MENU on  
Each time you press the button, the resistance alternates  
between HIGHand LOW.”  
the Monitor).  
HIGH:  
LOW:  
Initial setting. Normally select this.  
When using a long connecting cord and the  
picture flickering and blurring on the screen.  
6 Press MENU/EXIT (or MENU on the  
Monitor) twice to exit the menu  
operations.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Convenient Functions  
To set the other convenient functions, use menus.  
You can use the buttons either on the remote control or on  
Monitor for menu operations.  
Refer also to Menu Classificationson pages 34 and 36.  
Showing On-screen Display  
The input mode and signal type will be indicated on the  
screen.  
The following procedure can be done by using the buttons  
on the Monitor. You can also show these information by  
pressing DISPLAY on the remote control. (See page 14.)  
MENU INPUT  
1 Press MENU (or MENU/EXIT on the  
remote control) to display the Main  
Menu.  
MENU INPUT  
MAIN MENU  
PICTURE ADJ.  
Cursor (3)  
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
5
ENTER:  
SELECT:  
EXIT: MENU  
5 /  
MENU  
2 / 3  
2 Press 5/to move the cursor (3) to  
STATUS DISPLAY.”  
3 Press 3 to display the current input  
terminal and received signal type.  
RMC579 REMOTE CONTROL UNIT  
Ex. When selecting VIDEO Ainput  
OFF  
POWER  
ON  
VIDEO  
NTSC  
A
DISPLAY  
ASPECT  
Input selected  
Input Video signal  
type  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
Ex. When selecting COMPONENTinput  
VIDEO  
B
RGB A  
COMPONENT  
480i  
MUTING  
VOLUME  
Ex. When selecting RGB Aor RGB Binput  
VOLUME –  
RGB  
B
(BNC)  
37.9kHz  
60.3Hz*  
2 / 3  
5 /  
5
When the signal being input is a preset video  
mode, an *will be shown after the  
frequency.  
MENU/EXIT  
MENU/EXIT  
Note:  
If you want to make these information appear automatically  
when you change the input mode, see Showing the  
On-screen When Changing the Input Modeon page 25.  
1
*
REMOTE SWITCHdoes not appear on the menu  
unless the video input unit (IF-C42P1G) is separately  
purchased and installed.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Showing the On-screen When Changing  
the Input Mode  
Confirming the Use Time  
You can confirm the hours of use on the Setup Menu.  
This may be necessary when you ask for any service.  
With this function, you can see the selected input mode and  
signal type when changing the input mode.  
1 On the remote control:  
1 On the remote control:  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
On the Monitor:  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
Press MENU while holding 2 to display  
the Setup Menu.  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
1
*
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
1
*
ADJUST:  
SELECT:  
EXIT: MENU  
ADJUST:  
SELECT:  
EXIT: MENU  
2 Keep pressing 5/until the second  
page of the Setup Menu appears.  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
2 Press 5/to move the cursor (3) to  
STATUS DISPLAY.”  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
SET-UP MENU  
PIXEL SHIFT  
2/2  
:
:
OFF  
OFF  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
reset  
all reset  
HOUR METER x100h  
3 Press 2/3 to select the desired setting.  
Each time you press the button, the Status Display  
function alternates between ONand OFF.”  
:
123  
Hours of use  
ADJUST:  
SELECT:  
EXIT: MENU  
To cancel the Status Display function, select OFF.”  
3 Confirm the hour of use.  
4 Press MENU/EXIT (or MENU on the  
Monitor) once to exit from the menu  
operations.  
The displayed value for the hours of use is divided by  
100. To calculate the actual hours of use, multiply the  
displayed value by 100.  
4 Press MENU/EXIT (or MENU on the  
Monitor) once to exit from the menu  
operations.  
Notes:  
The value for the hours of use is added by one hour unit. If  
you use the monitor within one hour, it will not be added to  
the hours of use.  
The period when the monitor is on standby (the power  
lamp glows orange) will not be added to the hours of use.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Convenient Functions  
(Continued)  
Prohibiting the Monitor’s Button Operations  
This function allows you to prohibit the button operations on  
the Monitor to prevent malfunction or avoid tampering.  
1 On the remote control:  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
MENU INPUT  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
MENU INPUT  
1
*
ADJUST:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
CONTROL LOCK.”  
5
5 /  
MENU  
2 / 3  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
3 Press 2/3 to select the desired setting.  
Each time you press the button, the Control Lock  
function alternates between ONand OFF.”  
To cancel the Control Lock function, select OFF.”  
RMC579 REMOTE CONTROL UNIT  
4 Press MENU/EXIT (or MENU on the  
Monitor) once to exit from the menu  
operations.  
OFF  
POWER  
ON  
DISPLAY  
ASPECT  
INPUT SELECT  
Note:  
COMPO.  
A
/(RGB B)  
Even when the Control Lock function is in use, the  
following operations are possible:  
Operation to cancel the Control Lock function  
All operations from the remote control  
VIDEO  
B
RGB A  
MUTING  
VOLUME  
VOLUME –  
2 / 3  
5 /  
5
MENU/EXIT  
MENU/EXIT  
1
*
REMOTE SWITCHdoes not appear on the menu  
unless the video input unit (IF-C42P1G) is separately  
purchased and installed.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Remote-Controllable Input  
Setting the High-Definition Signal Types  
This function is available only when the optional video input unit  
(IF-C42P1G) is installed.  
When connecting the external control unit to the REMOTE  
MAKE terminal, you need to set the desired input to use,  
which you can select from the connected external control unit.  
You can select one of the High-Definition (HD) signal types  
through the COMPONENT/RGB B terminals 1080i or  
1035i. Normally set it to 1080i.”  
Without setting RGB/COMPO.correctly, you cannot  
show any picture though you select the COMPONENT  
input (see page 22).  
1 On the remote control:  
1 On the remote control:  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
SET-UP MENU  
1/2  
1
*
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
1
*
ADJUST:  
SELECT:  
EXIT: MENU  
ADJUST:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
2 Press 5/to move the cursor (3) to  
REMOTE SWITCH.”  
HD SIGNAL MODE.”  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
3 Press 2/3 to select the desired setting.  
Each time you press the button, the HD signal type  
alternates between 1080iand 1035i.”  
3 Press 2/3 to select the desired setting.  
Each time you press the button, the Remote Switch  
Mode changes as follows:  
You can select either 1080iand 1035iaccording to  
the HD signal you input whichever gives you  
proportionally shaped pictures.  
MODE1: Input alternates between VIDEO Aand  
VIDEO Bwhen controlled from the external  
control unit.  
MODE2: Input alternates between VIDEO Aand  
RGB B/COMPO.when controlled from the  
external control unit.  
4 Press MENU/EXIT (or MENU on the  
Monitor) once to exit from the menu  
operations.  
MODE3: Input alternates between VIDEO Aand  
RGB Awhen controlled from the external  
control unit.  
MODE4: Input alternates between VIDEO Band  
RGB B/COMPO.when controlled from the  
external control unit.  
MODE5: Input alternates between VIDEO Band  
RGB Awhen controlled from the external  
control unit.  
MODE6: Input alternates between RGB B/COMPO.”  
and RGB Awhen controlled from the  
external control unit.  
4 Press MENU/EXIT (or MENU on the  
Monitor) once to exit from the menu  
operations.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Convenient Functions  
(Continued)  
Setting the Clock and the Power On/Off Timer  
You can turn the Monitor on and off automatically with the  
Power On/Off timer.  
Since you cannot use the timer functions without setting  
the clock, set the clock at first.  
• Setting the Clock  
You can also adjust the clock with the following procedure.  
1 On the remote control:  
MENU INPUT  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
On the Monitor:  
MENU INPUT  
Press MENU while holding 2 to display  
the Setup Menu.  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
1
*
5
5 /  
MENU  
2 / 3  
ADJUST:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
TIMER,then press 3 to display the  
Timer Menu.  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
Before the clock setting  
After the clock setting  
RMC579 REMOTE CONTROL UNIT  
TIMER  
TIMER  
:
:
:
:
:
14:25  
ON  
08:26  
ON  
PRESENT TIME  
POWER-ON SET  
:
:
:
:
:
:– –  
OFF  
– – :– –  
OFF  
PRESENT TIME  
POWER-ON SET  
P
OWER-ON TIME  
P
OWER-ON TIME  
POWER-OFF SET  
POWER-OFF TIME  
reset  
POWER-OFF SET  
POWER-OFF TIME  
reset  
OFF  
POWER  
ON  
21:20  
– – :– –  
DISPLAY  
ASPECT  
ADJUST:  
SELECT:  
EXIT: MENU  
ADJUST:  
SELECT:  
EXIT: MENU  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
VIDEO  
B
3 Press 5/to move the cursor (3) to  
PRESENT TIME,then press 3.  
RGB A  
MUTING  
VOLUME  
4 Press 5/to move the cursor (3) to  
HOURS,then press 2/3 repeatedly to  
adjust the hour (24 hour clock).  
VOLUME –  
2 / 3  
5 /  
5
5 Press 5/to move the cursor (3) to  
MINUTES,then press 2/3 repeatedly  
to adjust the minute.  
MENU/EXIT  
MENU/EXIT  
6 Press MENU/EXIT (or MENU on the  
Monitor) three times to exit from the  
menu operations.  
1
*
REMOTE SWITCHdoes not appear on the menu  
unless the video input unit (IF-C42P1G) is separately  
purchased and installed.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Power On/Off Timer  
Select the item you want to set in step 3 in Setting the  
Clock(page 28) and follow the instructions below.  
3 Press 2/3 to select the desired setting.  
Each time you press the button, the Pixel Shift function  
alternates between ONand OFF.”  
To cancel the Pixel Shift function, select OFF.”  
POWER-ON SET  
You can activate/deactivate the Power-On Timer.  
Press 2/3 to select ONor OFF.”  
ON: The Monitor automatically turns on at the time  
set in POWER-ON TIME.”  
4 Press MENU/EXIT (or MENU on the  
Monitor) once to exit from the menu  
operations.  
OFF: The Power-On Timer is deactivated.  
Using the Power Save Function  
You can use this function to reduce the electrical consumption  
and to extend the lifetime of the Monitors screen.  
The brightness of the screen will be reduced.  
POWER-ON TIME  
You can adjust the time to turn on the Monitor.  
Set the hour and minute following steps 4 to 6 in Setting  
the Clock(page 28).  
POWER-OFF SET  
1 On the remote control:  
You can activate/deactivate the Power-Off Timer.  
Press 2/3 to select ONor OFF.”  
ON: The Monitor automatically turns off at the time  
set in POWER-OFF TIME.”  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
OFF: The Power-Off Timer is deactivated.  
POWER-OFF TIME  
You can adjust the time to turn off the Monitor.  
Set the hour and minute following steps 4 to 6 in Setting  
the Clock(page 28).  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
1
*
Using the Pixel Shift Function  
ADJUST:  
SELECT:  
EXIT: MENU  
This function periodically shift the position (pixels) of the  
displayed picture on the screen so that you can avoid the  
screen from being burned in.  
2 Press 5/to move the cursor (3) to  
POWER SAVE(on the second page).  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
1 On the remote control:  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
SET-UP MENU  
PIXEL SHIFT  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
reset  
all reset  
HOUR METER x100h  
2/2  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
:
:
OFF  
OFF  
:
123  
SET-UP MENU  
1/2  
ADJUST:  
SELECT:  
EXIT: MENU  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
1
*
3 Press 2/3 to select the desired setting.  
SAVE1: The screen gets dim.  
ADJUST:  
SELECT:  
EXIT: MENU  
SAVE2: The screen gets dimmer.  
OFF:  
The Power Save function is deactivate.  
To cancel the Power Save function, select OFF.”  
2 Press 5/to move the cursor (3) to  
PIXEL SHIFT(on the second page).  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
4 Press MENU/EXIT (or MENU on the  
Monitor) once to exit from the menu  
operations.  
SET-UP MENU  
PIXEL SHIFT  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
2/2  
:
:
OFF  
OFF  
reset  
all reset  
HOUR METER x100h  
:
123  
ADJUST:  
SELECT:  
EXIT: MENU  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Convenient Functions  
(Continued)  
Preventing the Afterimage Effect  
After showing the same still picture on the screen, reverse the  
color on the screen using this function so that you can avoid  
the screen from being burned in with the still picture.  
You can activate/deactivate the function with the Color-  
Reverse On/Off Timer.  
1 On the remote control:  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
MENU INPUT  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
MENU INPUT  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
1
*
ADJUST:  
SELECT:  
EXIT: MENU  
5
5 /  
MENU  
2 / 3  
2 Press 5/to move the cursor (3) to  
COLOR-REVERSE(on the second  
page), then press 3.  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
SET-UP MENU  
PIXEL SHIFT  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
2/2  
:
:
OFF  
OFF  
RMC579 REMOTE CONTROL UNIT  
reset  
all reset  
HOUR METER x100h  
OFF  
POWER  
ON  
:
123  
DISPLAY  
ASPECT  
ADJUST:  
SELECT:  
EXIT: MENU  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
3 Press 5/to select the item you want  
VIDEO  
B
to set and set the item as follows.  
RGB A  
MUTING  
VOLUME  
COLOR-REVERSE  
You can activate/deactivate the function manually.  
Press 2/3 to select the desired setting.  
VOLUME –  
ON:  
The function is activated immediately after  
exiting the menu operations.  
2 / 3  
5 /  
5
OFF: The function is deactivated.  
TIMER: Select this when you use the Color-Reverse  
On/Off Timer.  
MENU/EXIT  
MENU/EXIT  
Note:  
Set the clock (see page 28) and select TIMER,before  
using the Color-Reverse On/Off Timer.  
START SET  
You can activate/deactivate the Color-Reverse On Timer.  
Press 2/3 to select ONor OFF.”  
ON: The function is automatically activated at the  
time set in START TIME.”  
OFF: The Color-Reverse On Timer is deactivated.  
1
*
REMOTE SWITCHdoes not appear on the menu  
unless the video input unit (IF-C42P1G) is separately  
purchased and installed.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
START TIME  
3 Press 5/to select the item you want  
You can adjust the time to activate the function.  
Set the hour and minute following steps 4 to 6 in  
Setting the Clock(page 28).  
to set and set the item as follows.  
REFRESH  
You can activate/deactivate the function manually.  
Press 2/3 to select the desired setting.  
END SET  
You can activate/deactivate the Color-Reverse Off Timer.  
Press 2/3 to select ONor OFF.”  
ON: The function is automatically deactivated at the  
time set in END TIME.”  
ON:  
The function is activated immediately after  
exiting the menu operations.  
OFF: The function is deactivated.  
TIMER: Select this when you use the Refresh On/Off  
Timer.  
OFF: The Color-Reverse Off Timer is deactivated.  
Note:  
END TIME  
Set the clock (see page 28) and select TIMER,before  
using the Refresh On/Off Timer.  
You can adjust the time to deactivate the function.  
Set the hour and minute following steps 4 to 6 in  
Setting the Clock(page 28).  
START SET  
You can activate/deactivate the Refresh On Timer.  
Press 2/3 to select ONor OFF.”  
ON: The function is automatically activated at the  
time set in START TIME.”  
4 Press MENU/EXIT (or MENU on the  
Monitor) repeatedly to exit from the  
menu operations.  
OFF: The Refresh On Timer is deactivated.  
To cancel the Color-Reverse function immediately  
Repeat steps 1 to 3, then select OFFin COLOR-REVERSE”  
by pressing 2/3.  
START TIME  
You can adjust the time to activate the function.  
Set the hour and minute following steps 4 to 6 in  
Setting the Clock(page 28).  
Refreshing the Screen  
After the power is turned off, a whitish image may be left on  
the screen. In that case, leave the monitor in a white back state  
for a while, and the image will disappear.  
You can activate/deactivate the function with the Refresh  
On/Off Timer.  
END SET  
You can activate/deactivate the Refresh Off Timer.  
Press 2/3 to select ONor OFF.”  
ON: The function is automatically deactivated at the  
time set in END TIME.”  
OFF: The Refresh Off Timer is deactivated.  
1 On the remote control:  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
END TIME  
You can adjust the time to deactivate the function.  
Set the hour and minute following steps 4 to 6 on  
Setting the Clock(page 28).  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
4 Press MENU/EXIT (or MENU on the  
Monitor) repeatedly to exit from the  
menu operations.  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
1
*
To cancel the Refresh function immediately  
Repeat steps 1 to 3, then select OFFin REFRESHby  
pressing 2/3.  
ADJUST:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
REFRESH(on the second page) then  
press 3.  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
SET-UP MENU  
PIXEL SHIFT  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
2/2  
:
:
OFF  
OFF  
reset  
all reset  
HOUR METER x100h  
:
123  
ADJUST:  
SELECT:  
EXIT: MENU  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Convenient Functions  
(Continued)  
Checking the Timer Battery  
You can check the remaining time available from the timer  
battery on the TIMER, COLOR-REVERSE, and REFRESH  
menus.  
When the battery becomes weak (BATTERY LOW)  
BATTERY LOWappears on the screen.  
TIMER  
PRESENT TIME  
POWER-ON SET  
POWER-ON TIME  
POWER-OFF SET  
POWER-OFF TIME  
reset  
:
:
:
:
:
14:25  
ON  
08:26  
ON  
MENU INPUT  
21:20  
BATTERY LOW  
SELECT: EXIT: MENU  
ADJUST:  
MENU INPUT  
When the battery runs out (BATTERY EMPTY)  
BATTERY EMPTYappears on the screen.  
TIMER  
PRESENT TIME  
POWER-ON SET  
POWER-ON TIME  
POWER-OFF SET  
POWER-OFF TIME  
reset  
:
:
:
:
:
– – :–  
OFF  
– – :– –  
OFF  
5
5 /  
MENU  
2 / 3  
– – :– –  
BATTERY EMPTY  
SELECT: EXIT: MENU  
ADJUST:  
The clock is reset and PRESENT TIMEis shown as -- : --.”  
You cannot replace the battery yourself. Please consult your  
dealer to replace it.  
Set the clock and the timer functions (Power On/Off Timer,  
Color-Reverse On/Off Timer, and Refresh On/Off Timer)  
again after replacing the battery.  
You can use functions other than the timer functions  
without replacing the battery.  
RMC579 REMOTE CONTROL UNIT  
OFF  
POWER  
ON  
DISPLAY  
ASPECT  
INPUT SELECT  
COMPO.  
A
/(RGB B)  
VIDEO  
B
RGB A  
MUTING  
VOLUME  
VOLUME –  
2 / 3  
5 /  
5
MENU/EXIT  
MENU/EXIT  
Notes on the Color-Reverse/Refresh Timer  
Once you set the Color-Reverse/Refresh timer, the timer  
function is still activated even if you turn off the power.  
If you turn on the power after the START TIMEyou  
set, Color-Reverse/Refresh function is activated.  
To cancel the function, select OFFin the menu  
(pages 30 and 31).  
The Color-Reverse timer is deactivated when you turn  
on or off the Color-Reverse function manually.  
The Refresh timer works in the same way as mentioned  
above.  
1
*
REMOTE SWITCHdoes not appear on the menu  
unless the video input unit (IF-C42P1G) is separately  
purchased and installed.  
Select TIMERin the menu to control the functions  
automatically ( pages 30 and 31).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resetting All the Setup Menu Settings  
Resetting All the Menu Settings  
You can reset all the following Setup Menu settings at a time,  
except the use time (HOUR METER).  
You can reset all the Menu settings and adjustments at a time,  
except the use time (HOUR METER).  
1 On the remote control:  
1 On the remote control:  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
Press MENU/EXIT while holding  
VOLUME to display the Setup Menu.  
On the Monitor:  
On the Monitor:  
Press MENU while holding 2 to display  
the Setup Menu.  
Press MENU while holding 2 to display  
the Setup Menu.  
SET-UP MENU  
1/2  
SET-UP MENU  
1/2  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
Cursor (3)  
Cursor (3)  
1
*
1
*
ADJUST:  
SELECT:  
EXIT: MENU  
ADJUST:  
SELECT:  
EXIT: MENU  
2 Press 5/to move the cursor (3) to  
2 Press 5/to move the cursor (3) to all  
reset(on the second page).  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
reset(on the second page).  
The Setup Menu consists of two pages. If you keep  
pressing 5/, you can move to the other page from  
the current page.  
SET-UP MENU  
PIXEL SHIFT  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
reset  
all reset  
HOUR METER x100h  
2/2  
SET-UP MENU  
PIXEL SHIFT  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
reset  
all reset  
HOUR METER x100h  
2/2  
:
:
OFF  
OFF  
:
:
OFF  
OFF  
:
123  
:
123  
ADJUST:  
SELECT:  
EXIT: MENU  
ADJUST:  
SELECT:  
EXIT: MENU  
3 Press 3.  
3 Press 3.  
The confirmation screen appears.  
The confirmation screen appears.  
all reset  
reset  
Are you sure?  
"YES" then  
"NO" then MENU key.  
Are you sure?  
"YES" then  
"NO" then MENU key.  
key.  
key.  
To cancel the reset, press MENU/EXIT (or MENU on  
the Monitor).  
To cancel the reset, press MENU/EXIT (or MENU on  
the Monitor).  
4 Press 3 again to reset all the Setup  
4 Press 3 again to reset all the Menu  
Menu settings.  
settings and adjustments.  
The power is turned off, then turned on again  
automatically.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Classifications  
Main Menu  
Main Menu  
Picture Adjustment Menu  
:+01  
CONTRAST  
+
VIDEO  
A
MAIN MENU  
PICTURE ADJ.  
:+01  
BRIGHT  
:
:
:
:
:
+01  
00  
02  
00  
00  
CONTRAST  
BRIGHT  
CHROMA  
PHASE  
SHARPNESS  
sub menu  
reset  
PICTURE ADJ.  
+
SIZE/POSITION ADJ.  
FUNCTION SELECT  
STATUS DISPLAY  
:+01  
CHROMA  
+
:+01  
PHASE  
ADJUST:  
SELECT:  
EXIT: MENU  
ENTER:  
SELECT:  
EXIT: MENU  
+
:+01  
SHARPNESS  
+
*1 *2  
*1 *2  
reset  
Are you sure?  
"YES"  
"NO" then MENU  
then  
key.  
key.  
Size/Position Adjustment Menu  
:+01  
H
SIZE  
++  
+
+
SIZE/POSITION ADJ.  
H
H
V
V
SIZE  
POSITION  
SIZE  
:
:
:
:
:
:
+01  
00  
02  
00  
00  
00  
:+01  
H
POSITION  
SIZE  
++  
+ +  
POSITION  
DOT CLOCK  
CLOCK PHASE  
sub menu  
reset  
:+01  
:+01  
V
ADJUST:  
SELECT:  
EXIT: MENU  
V
POSITION  
:+01  
DOT CLOCK  
+
3
3
*
*
:+01  
CLOCK PHASE  
+
reset  
Are you sure?  
then  
"YES"  
key.  
"NO" then MENU  
key.  
Function Selection Menu  
FUNCTION SELECT  
COLOR TEMP.  
ASPECT  
SIGNAL MODE  
RGB/COMPO.  
SYNC TERM.  
reset  
:
:
:
:
:
HIGH  
PANORAMIC  
AUTO  
RGB  
HIGH  
reset  
Are you sure?  
"YES"  
"NO" then MENU  
then  
key.  
key.  
ADJUST:  
SELECT:  
EXIT: MENU  
*4 *5 *6 *7  
Status Display  
VIDEO  
NTSC  
A
Input currently selected  
Input video signal  
Ex. When VIDEO Ainput is selected.  
*1 Adjustable when viewing the NTSC, PAL or SECAM signal, or component signal.  
*2 Adjustable when viewing the NTSC signal or component signal.  
*3 Adjustable when RGB A or RGB B input is selected.  
*4 Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.  
*5 Not adjustable when viewing the following component signals720/60p, 1080/50i, and 1080/60i (1035/60i).  
*6 Adjustable when RGB B or COMPONENT input is selected.  
*7 Adjustable when RGB B input is selected.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE ADJ. (Picture adjustment): See page 16.  
CONTRAST  
BRIGHT  
Adjusts the contrast of the picture.  
Adjusts the brightness of the picture.  
Adjusts the color density of the picture.  
Adjusts the color phase.  
CHROMA*1  
PHASE*2  
SHARPNESS  
sub menu  
reset  
Adjusts the outlines of the picture.  
Displays the fine adjustment bar.  
Resets the Picture Adjustment Menu settings to defaults.  
SIZE/POSITION ADJ. : See page 17.  
H.SIZE  
Adjusts the horizontal screen size.  
H. POSITION  
Adjusts the horizontal screen position.  
V. SIZE  
Adjusts the vertical screen size.  
V.POSITION  
DOT CLOCK*3  
Adjusts the vertical screen position.  
Adjusts to eliminate stripes or flickering. Use with CLOCK PHASE.”  
Normally, no adjustment is needed.  
Adjusts to eliminate stripes or flickering. Use with DOT CLOCK.”  
Normally, no adjustment is needed.  
CLOCK PHASE*3  
sub menu  
reset  
Displays the fine adjustment bar.  
Resets Size/position Adjustment Menu settings to defaults.  
FUNCTION SELECT: See pages 19 to 23.  
COLOR TEMP.  
Adjusts the color temperature.  
Use when the picture is reddish or bluish.  
Selects the horizontal to vertical ratio of the screen.  
Selects a color system (NTSC, PAL, SECAM, NTSC 4.43, PAL60) when VIDEO A or VIDEO B  
input is selected.  
ASPECT*4  
SIGNAL MODE*5  
Selects a scan system480i, 576i, 480p, 720p, 1080i (1035i)when COMPONENT input is  
selected. Normally, set to AUTO.  
Selects the usage of the COMPONENT/RGB B terminals either as the COMPONENT input  
RGB/COMPO.*6  
terminal or as the RGB B input terminal.  
Adjusts the resistance of RGB B input terminals.  
Resets the Function Selection Menu settings to defaults.  
SYNC TERM.*7  
reset  
*1 Adjustable when viewing the NTSC, PAL or SECAM signal, or component signal.  
*2 Adjustable when viewing the NTSC signal or component signal.  
*3 Adjustable when RGB A or RGB B input is selected.  
*4 Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.  
*5 Not adjustable when viewing the following component signals720/60p, 1080/50i, and 1080/60i (1035/60i).  
*6 Adjustable when RGB B or COMPONENT input is selected.  
*7 Adjustable when RGB B input is selected.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Classifications  
(Continued)  
Setup Menu  
White Balance Adjustment Menu  
SET-UP MENU  
1/2  
:
000  
+
R
GAIN  
STATUS DISPLAY  
CONTROL LOCK  
REMOTE SWITCH  
HD SIGNAL MODE  
WHITE BALANCE  
TIMER  
:
:
:
:
OFF  
OFF  
MODE1  
1080i  
WHITE BALANCE:HIGH  
R
G
B
GAIN  
GAIN  
GAIN  
:
:
:
000  
001  
002  
:+001  
+
G
GAIN  
+
sub menu  
reset  
:002  
B
GAIN  
+
ADJUST:  
SELECT:  
EXIT: MENU  
ADJUST:  
SELECT:  
EXIT: MENU  
reset  
Are you sure?  
then  
*
"YES"  
"NO" then MENU  
key.  
key.  
Reset Confirmation Screen  
Timer Menu  
TIMER  
PRESENT TIME  
POWER-ON SET  
OWER-ON TIME  
POWER-OFF SET  
POWER-OFF TIME  
reset  
:
:
:
:
:
14:25  
ON  
08:26  
ON  
TIMER  
PRESENT TIME  
HOURS  
:
:
:
14:25  
14  
25  
P
MINUTES  
21:20  
TIMER  
POWER-ON TIME  
HOURS  
MINUTES  
:
:
:
08:26  
08  
26  
ADJUST:  
SELECT:  
EXIT: MENU  
TIMER  
POWER-OFF TIME  
HOURS  
MINUTES  
:
:
:
21:20  
21  
20  
To Reset Confirmation Screen”  
Color-Reverse Menu  
SET-UP MENU  
2/2  
COLOR-REVERSE  
PIXEL SHIFT  
:
:
OFF  
OFF  
COLOR-REVERSE  
:
:
:
:
:
OFF  
ON  
08:06  
ON  
21:47  
COLOR-REVERSE  
POWER SAVE  
COLOR-REVERSE  
REFRESH  
reset  
all reset  
START SET  
START TIME  
END SET  
END TIME  
reset  
START TIME  
HOURS  
MINUTES  
:
:
:
08:06  
08  
06  
HOUR METER x100h  
:
123  
COLOR-REVERSE  
END TIME  
HOURS  
MINUTES  
:
:
:
21:47  
21  
47  
ADJUST:  
SELECT:  
EXIT: MENU  
ADJUST:  
SELECT:  
EXIT: MENU  
To Reset Confirmation Screen”  
Refresh Menu  
*
Appears only when the  
video input unit  
(IF-C42P1G) is  
installed.  
REFRESH  
REFRESH  
START SET  
START TIME  
END SET  
END TIME  
reset  
:
:
:
:
:
OFF  
ON  
12:10  
ON  
REFRESH  
START TIME  
HOURS  
:
:
:
12:10  
12  
10  
MINUTES  
14:24  
REFRESH  
END TIME  
HOURS  
MINUTES  
:
:
:
14:24  
14  
24  
ADJUST:  
SELECT:  
EXIT: MENU  
To Reset Confirmation Screen”  
all reset  
Are you sure?  
then  
then  
"YES"  
"NO"  
key.  
key.  
MENU  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STATUS DISPLAY  
Sets if you want the input terminal and the type of signal to be indicated on the screen just after  
inputs are switched. (See page 25.)  
CONTROL LOCK  
REMOTE SWITCH  
Sets the Monitor so that it cannot be operated with the buttons on itself. (See page 26.)  
Set the selectable input terminals when controlling the Monitor with the external control unit (See  
page 27.)  
HD SIGNAL MODE  
WHITE BALANCE  
Select the High-Definition (HD) signal type. (See page 27.)  
Adjusts R GAIN, G GAIN and B GAIN finely each for HIGHand LOWsettings of the color  
temperature. (See page 19.)  
TIMER  
Sets the clock and the Power On/Off Timer. (See page 28.)  
PIXEL SHIFT  
POWER SAVE  
COLOR-REVERSE  
Sets a screen saver. (See page 29.)  
Sets the power save function. (See page 29.)  
Use to reverse the color of the still picture to prevent its afterimage from being left on the screen.  
(See page 30.)  
REFRESH  
reset  
all reset  
Use to eliminate afterimages on the screen. (See page 31.)  
Resets the Setup Menu settings to defaults. (See page 33.)  
Resets the all menu settings and adjustments to defaults. (See page 33.)  
Use to confirm the hours of use. (See page 25.)  
HOUR METER  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Solutions to common problems related to the Monitor are described here. If none of the solutions presented here solves the  
problem, unplug the Monitor and consult an authorized dealer or service center.  
Symptom  
Probable cause  
Corrective action  
Insert the power cord (plug) firmly.  
Turn on the POWER switch.  
Page  
11  
Power is not supplied. Is the power cord disconnected?  
Is the POWER switch turned on?  
14  
Power is suddenly  
turned on or off.  
Is the Power On/Off Timer activated? Set the timer to OFFon the menu.  
28  
14  
Video image does not Is the correct input selected?  
appear, or audio  
sound does not occur.  
Select the correct input by pressing  
INPUT SELECT (VIDEO A, VIDEO B,  
COMPO./(RGB B) or RGB A) on the  
remote control (or INPUT on the  
Monitor).  
Are the devices connected correctly?  
Connect the devices correctly.  
Set the devices correctly.  
Set it correctly.  
11, 12  
Are signals being supplied from the  
connected devices?  
Is RGB/COMPO.set correctly if  
using the COMPONENT/RGB B  
terminals?  
22  
10  
Are input signals (scanning frequency, Check if the signal is appropriate  
etc.) appropriate?  
(scanning frequency, etc.), and input  
the appropriate signal.  
Is brightness adjusted correctly?  
Is volume set at minimum?  
Adjust brightness on the menu.  
Adjust volume.  
16  
14  
Are the diagnostic lamps turned on?  
Refer to Self-diagnostic indication,”  
and take an appropriate action.  
39  
The picture becomes Is the signal RGB input?  
blurred.  
Adjust DOT CLOCK and CLOCK  
PHASE using the menu.  
17  
Is the RGB B connecting cord long?  
Is brightness adjusted correctly?  
Set the SYNC TERM. LOW.”  
23  
16  
Color is abnormally  
dark or bright.  
Adjust BRIGHT (brightness) using the  
menu.  
Is picture quality (colour density, etc.) Adjust picture using the menu.  
adjusted correctly?  
16  
39  
21  
TEMP. OVERlights (or flashes) at the Refer to Self-diagnostic indication,”  
right bottom of the screen.  
and take an appropriate action.  
Color is poor or  
unstable.  
Is the correct broadcast system (color  
system) selected?  
Set SIGNAL MODE (color system) to  
AUTO.”  
Are signals (scanning frequency, etc.) to Check if the signal is appropriate  
connected devices appropriate?  
(scanning frequency, etc.), and input  
the appropriate signal.  
10  
30, 31  
17  
Color is suddenly  
reversed or whitened.  
Is the Color-Reverse/Refresh timer  
activated?  
Set COLOR-REVERSE/REFRESH”  
to OFFon the menu.  
The picture is cut or  
shifted toward one  
side.  
Is the size or position of the screen  
adjusted properly?  
Adjust H.SIZE, V.SIZE, H.POSITION  
or V.POSITION using the menu.  
The remote control  
does not work.  
Are the batteries correctly set?  
Are the batteries exhausted?  
Insert batteries correctly, observing the  
polarities (ª and ·).  
8
8
Replace with new batteries.  
Remove any blocking object.  
Is there any object blocking the path  
between the remote control and remote  
sensor?  
Is the Monitor too far away from you? Move toward the Monitor, then operate  
the remote control.  
The buttons on the  
Monitor do not work.  
Is the Control Lock function in use?  
Set the Control Lock function to OFF”  
using the menu.  
26  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the trouble still persists, follow the procedure below:  
Self-diagnostic Indication  
When something abnormal occurs with the Monitor, this  
function informs you of the condition of the Monitor with  
self-diagnostic lamps, allowing for smooth service work.  
1 Check which lamps are lighting or flashing.  
On the Self-diagnostic Report Sheet (below), check the box  
next to Lightsor Flashesof the corresponding lamp or  
lamps.  
Remote sensor  
Only one lamp may light or flash, or all three lamps  
may do so.  
1
2
3
2 Switch off the POWER switch on the back of the  
Monitor.  
Power lamp  
Self-diagnostic lamps (1 to 3)  
M
E
N
U
I
N
P
U
T
3 Unplug the power cord.  
4 Call your dealer and tell which lamps are lighting  
or flashing. (Copy and fax the Self-diagnostic  
Report Sheet below.)  
If the screen monitor turns off and self-diagnostic  
lamps light or flash  
If the self-diagnostic lamps light or flash in red, check the  
following before consulting the dealer where you  
purchased the Monitor.  
Note:  
If you switch on the main power immediately after switching  
it off (or after recovering from a brief power interruption), the  
self-diagnostic lamps may light (or flash), and no image may  
appear on the screen. In this case, switch off the main power  
again, wait for about 10 seconds, then switch it on again. If no  
self-diagnostic lamps light or flash, you can operate and use  
the Monitor as usual.  
If self-diagnostic lamp 1 (upper) flashes, lamp 2 (middle)  
lights, and lamp 3 (lower) flashes  
This may be caused by the dusty intakes on the rear. If  
this happens, switch off the main power by POWER  
switch (set to (off)), unplug the AC power cord,  
then clean the intakes by referring to the instruction on  
page 2.  
After cleaning, switch on the Monitors main power  
again. If self-diagnostic lamps do not go off, consult  
your dealer immediately.  
Self-diagnostic Report Sheet  
If the screen monitor dims a little and TEMP. OVER”  
lights (or flashes)  
If TEMP. OVERlights or flashes at the right bottom of the  
screen, check the following before consulting the dealer  
where you purchased the Monitor.  
Store name where you purchased the Monitor  
To  
Model Name:  
TEMP. OVERappears to warn you of the internal heat  
buildup, which is usually caused by accumulated dust  
around the intakes or by improper installation. If the cause  
of the internal heat buildup is eliminated, this indication  
disappears and the screen recovers the brightness.  
If “TEMP. OVER” flashes in yellow  
Plasma Display Monitor  
VM-4200  
The self-diagnostic lamps light or flash as listed on the  
following table. Please give me immediate advice or service if  
necessary.  
This may be caused by the dusty intakes on the rear. If  
this happens, switch off the main power by POWER  
switch (set to (off)), unplug the AC power cord,  
then clean the intakes by referring to the instruction on  
page 2.  
Self-diagnostic lamps  
NO. Lamp position  
Conditions  
After cleaning, switch on the Monitors main power  
again. If TEMP. OVERstill flashes, this trouble may  
be caused by improper installation or improper  
location of the Monitor. In this case, consult your  
dealer immediately to solve this improper  
1
2
3
Upper  
Middle  
Lower  
& Lights  
& Flashes  
& Flashes  
& Lights  
& Lights  
& Flashes  
& Flashes  
installation and to improve the circumstances around  
the Monitor.  
If “TEMP. OVER” lights in red  
TEMP. OVER  
TEMP. OVERwill be shown for abut two minutes, the  
Monitor will shut off automatically, then the Self-  
diagonal lamps light in red. If this happens, switch off  
the main power by POWER switch (set to (off)),  
unplug the AC power cord, then consult your dealer  
immediately.  
Your Name:  
Telephone No.:  
Address:  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model name  
VM-4200  
Frame color  
Silver  
Screen size  
Type 42 wide format  
16:9 (Wide format)  
852 (H) x 480 (V)  
Aspect ratio  
Number of pixels displayed  
Number of colors displayed  
16.77 million (256 colors for each of RGB)  
93.3 cm x 53.3 cm, 107.4 cm  
Effective screen size  
(W x H, Diagonally)  
Weight  
35.1 kg  
External dimensions  
(W x H x D)  
103.5 cm x 64.0 cm x 8.9 cm  
* Excluding protruding parts  
Power requirements  
AC 220 240 V, 50 Hz/60 Hz  
Rated input current  
1.4 A  
1
*
Compatible systems  
NTSC, NTSC 4.43,  
PAL, PAL60, SECAM  
1
*
VIDEO A, VIDEO B input  
1
*
COMPONENT input  
480i, 576i, 480p, 576p, 720/60p,  
1080/50i, 1080/60i (1035/60i)  
Audio power output  
SPEAKER OUT: 6 to 8 Ω  
3 W + 3 W (TYP at impedance 6 )  
Operating conditions  
Temperature: 0 °C to 40 °C  
Relative humidity: 20 % to 80 % (non-condensation)  
(Slightly variable depending on ambient conditions for installation)  
1
*
VIDEO A  
1
*
Video input  
BNC terminal x 1, 1 V(p-p), 75 Ω  
BNC terminal x 1, 1 V(p-p), 75 Ω  
1
*
Video output  
1
*
Audio input  
Pin jack terminal x 2 (L/R)  
500 mV(rms), high impedance  
1
*
VIDEO B  
1
*
Y/C input  
Y/C terminal x 1  
Y: 1 V(p-p), 75 Ω  
C: 0.286 V(p-p), 75 (for NTSC)  
C: 0.3 V(p-p), 75 (for PAL/SECAM)  
1
1
*
Video input  
Pin jack terminal x 1, 1 V(p-p), 75 Ω  
*
Audio input  
Pin jack terminal x 2 (L/R)  
500 mV(rms), high impedance  
*1This monitor does not have the following input terminals VIDEO A, VIDEO B, and COMPONENT/RGB B.  
You need to install the video input unit (IF-C42P1G), which is separately purchased, to select VIDEO A,” “VIDEO B,and  
COMPONENT (or RGB B)as the input.  
*2To use the COMPONENT/RGB B terminals either as the COMPONENT input terminal or as the RGB B input terminal, you  
need to set RGB/COMPO.correctly (see page 22).  
For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be more or  
less different from actual products.  
Design and specifications are subject to change without notice.  
IBM and IBM PC are registered trademarks of International Business Machines Corporation. Macintosh is registered  
trademarks of Apple Computer, Inc.  
All other product names mentioned herein are used for identification purposes only, and may be the trademarks or registered  
trademarks of their respective companies.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Model name  
VM-4200  
*1 *2  
COMPONENT/RGB B  
*1 *2  
COMPONENT input  
BNC terminal x 3  
Y: 1 V(p-p), 75 Ω  
PB/B-Y: 0.7 V(p-p), 75 Ω  
PR/R-Y: 0.7 V(p-p), 75 Ω  
*1 *2  
RGB input  
BNC terminal x 5  
Analog RGB:  
R: 0.7 V(p-p), 75 Ω  
G: 0.7 V(p-p), 75 Ω  
B: 0.7 V(p-p), 75 Ω  
G on sync: 1 V(p-p),  
75 (negative sync)  
Horizontal sync/  
Composite sync (HD/Cs):  
HD: 0.3 V(p-p) to 5 V(p-p), 1 kΩ  
(positive/negative polarity)/75 Ω  
Cs: 0.3 V(p-p) to 5 V(p-p), 1 kΩ  
(positive/negative polarity)/75 Ω  
Vertical sync (VD):  
VD: 1 V(p-p) to 5 V(p-p), 1 kΩ  
(positive/negative polarity)/75 Ω  
1
*
Audio input  
Pin jack terminal x 2 (L/R)  
500 mV(rms), high impedance  
RGB A  
RGB input  
D-sub 3-row 15-pin terminal x 1,  
Video signal: 0.7 V(p-p), 75 Ω  
G on sync: 1 V(p-p), 75 (negative sync)  
Horizontal sync/Composite sync (HD/Cs):  
HD: 0.3 V(p-p) to 5 V(p-p), 470 (positive/negative polarity)  
Cs: 0.3 V(p-p) to 5 V(p-p), 470 (positive/negative polarity)  
Vertical sync (VD):  
VD: 1 V(p-p) to 5 V(p-p), 470 (positive/negative polarity)  
Audio input  
Stereo mini jack terminal x 1  
500 mV(rms), high impedance  
REMOTE terminals  
RS-232C: D-sub 9-pin terminal x 1  
MAKE: Mini DIN 4 pin  
WIRED: Stereo mini jack terminal x 1  
OPTION terminal  
Used exclusively for JVC's optional parts  
AUDIO OUT terminals  
Pin jack terminal x 2 (L/R)  
Output impedance 600 Ω  
SPEAKER OUT (L/R) terminals Impedance 6 to 8 Ω  
Options (not supplied)  
Stand Unit  
TS-C420P1W, TS-C420P4W, TS-C420P5W, TS-C420P7W  
Wall Mounting Unit  
Ceiling Suspension Unit  
Video Input Unit  
Speaker Unit  
TS-C420P2W, TS-C420P6W, TS-C420P9W  
TS-C420P3W  
IF-C42P1G  
TS-C421SPG  
* Consult your dealer to see if other options are available.  
Notice on transportation  
This Monitor is precision equipment and needs dedicated packing material for transportation.  
Never use any packing material supplied from other than JVC or JVC-authorized dealers.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
(Continued)  
Pin assignment (Specifications for terminals)  
• RS-232C terminal  
This is a female type connector.  
• Y/C terminal  
4
3
5
2
1
Pin number Signal name  
Pin number Signal name  
4
2
3
1
Pin number Signal name  
1
2
3
4
5
DCD  
RD  
6
7
8
9
DSR  
RTS  
CTS  
RI  
1
2
3
4
GND (Y)  
GND (C)  
TD  
Y
C
DTR  
GND  
8
6
9
7
• MAKE terminal  
• RGB Input Terminal  
Pin number Signal name  
Pin number Signal name  
6
1
2
3
4
5
6
7
8
Red  
Green  
Blue  
9
10  
N/C  
GND  
GND  
N/C  
6
4
2
5
3
1
7
Pin number Signal name  
11  
1
2
3
1
2
3
4
5
6
GND  
GND  
12  
11  
13  
14  
8
N/C  
12  
SW2  
4
5
GND  
GND  
GND  
GND  
13  
HD/Cs  
VD  
SW1  
14  
15  
SW DET  
GND  
9
15  
N/C  
10  
External  
GND  
Dimensions  
Top view  
Front view  
Side view  
1035  
997  
89  
57.5  
933  
MENU INPUT  
1.5  
Unit: mm  
VICTOR COMPANY OF JAPAN, LIMITED  
Printed in Japan  
0703-MK-MW-VP  
© 2003 VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Cooktop KG6407 AV G User Manual
InFocus Router M8V2 User Manual
IOGear Network Card GICe720S3W6 User Manual
Jabra Headphones BT350 User Manual
Jacuzzi Marine Sanitation System E124000Z User Manual
JVC Car Stereo System GET0125 001A User Manual
JVC Computer Monitor GD V422U User Manual
KitchenAid Dishwasher KUDG23HB User Manual
KitchenAid Microwave Oven KHMS1850S User Manual
Kodak Film Camera 5272TM User Manual