AUDIO/VIDEO CONTROL RECEIVER
RECEPTEUR DE CONTROL AUDIO/VIDEO
RX-6100VBK
POWER
CATV/ SAT
TV
VCR
AUDIO
SLEEP
PHONO
FM/AM
DVD TV SOUND/ DBS VCR
CD
ANALOG/DIGITAL
D I G I T A L
TAPE/MD
3
8
MASTER VOLUME
CATV
REC PAUSE
SURROUND
CONTROL
RX-6100V
AUDIO/VIDEO CONTROL RECEIVER
D
I
G
I
T
A
L
7
–
+
SOUND
STANDBY
ADJUST
SETTING
MEMORY
SURROUND
MODE
CATV CH VCR CH
CD - DISC
POWER
SUBWOOFER
CNTR
1
2
3
4
REAR•L
REAR•R
THEATER
LIVE CLUB DANCE CLUB
HALL
PAVILLION
7/P
8
ENTER
5
EFFECT
9
6
TEST
0
ONE TOUCH OPERATION/
INPUT ATT.
DVD
CD
TV SOUND/DBS
VCR
DSP. MODE
MULTI CURSOR
MENU
+10
100+
10
RETURN
SOURCE NAME
TAPE/MD
SURROUND
ON
TV/ VIDEO
PHONO
FM/AM
SPEAKERS
1
PHONES
2
ANALOG/DIGITAL
TV CH
TV VOL VOLUME
MUTING
SOURCE NAME
DIGITAL AUTO
_
ON
—
OFF
RM-SRX6500J REMOTE CONTROL
INSTRUCTIONS
MANUAL D’INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0381-001A
[C]
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta ble of Cont ent s
P a r t s Ident ifica t ion ...................................... 2
Get t ing S t a r t ed ........................................... 3
Us ing t he DS P M odes ................................ 1 8
Available DSP Modes According to the Speaker Arrangement .. 20
Adjusting the 3D-PHONIC Modes .......................................... 21
Adjusting the DAP Modes and HEAD PHONE mode ............ 21
Adjusting the Surround Modes ................................................ 22
Activating the DSP Modes ....................................................... 25
Before Installation ...................................................................... 3
Checking the Supplied Accessories ........................................... 3
Connecting the FM and AM Antennas ....................................... 3
Connecting the Speakers ............................................................ 4
Connecting Audio/Video Components ....................................... 5
Connecting the Power Cord ....................................................... 7
Putting Batteries in the Remote Control .................................... 7
COM P U LINK Rem ot e Cont r ol S ys t em ......... 2 6
AV COM P U LINK Rem ot e Cont r ol S ys t em .... 2 7
Oper a t ing J VC’s Audio/ Video Com ponent s ... 2 9
Ba s ic Oper a t ions ......................................... 8
Operat ing Ot her Manufact urers’ Video
Equipment ................................................. 3 1
Turning the Power On and Off (Standby) .................................. 8
Selecting the Source to Play ....................................................... 8
Adjusting the Volume ................................................................. 9
Selecting the Front Speakers ...................................................... 9
Muting the Sound ....................................................................... 9
Adjusting the Subwoofer Output Level.................................... 10
Attenuating the Input Signal .................................................... 10
Reinforcing the Bass ................................................................ 10
Adjusting the Tone ................................................................... 10
Tr oubles hoot ing ......................................... 3 3
S pecifica t ions ............................................ 3 4
Ba s ic S et t ings ........................................... 1 1
Recording a Source .................................................................. 11
Adjusting the Front Speaker Output Balance........................... 11
Changing the Source Name ...................................................... 11
Setting the Speakers for the DSP Modes ................................. 12
Digital Input (DIGITAL IN) Terminal Setting ......................... 14
Selecting the Analog or Digital Input Mode ............................ 14
Setting the Subwoofer Information .......................................... 15
Storing the Basic Settings and Adjustments
— One Touch Operation .................................................... 15
Using the Sleep Timer .............................................................. 15
Receiving Ra dio Br oa dca s t s ........................ 1 6
Tuning in Stations Manually .................................................... 16
Using Preset Tuning ................................................................. 16
Selecting the FM Reception Mode........................................... 17
1
Download from Www.Somanuals.com. All Manuals Search And Download.
P a r t s Ident ifica t ion
Become familiar with the buttons and controls on the receiver before use.
Refer to the pages in parentheses for details.
~
Ÿ
! ⁄
@
# ‹
$
›
¤
MASTER VOLUME
RX-6100V
AUDIO/VIDEO CONTROL RECEIVER
D
I
G
I
T
A
L
–
+
STANDBY
ADJUST
SETTING
MEMORY
POWER
THEATER
LIVE CLUB DANCE CLUB
HALL
PAVILLION
ONE TOUCH OPERATION/
INPUT ATT.
DVD
CD
TV SOUND/DBS
VCR
DSP. MODE
MULTI CURSOR
SOURCE NAME
TAPE/MD
SURROUND
ON
PHONO
FM/AM
SPEAKERS
1
PHONES
2
ANALOG/DIGITAL
SOURCE NAME
DIGITAL AUTO
_ ON — OFF
*
‡
&
fl
^
fi
%
Fr ont P a nel
Rem ot e Cont r ol
~
POWER buttons (8, 30)
CATV/SAT, TV, VCR, AUDIO
Source selecting buttons (8)
DVD, TV SOUND/DBS, VCR, CD, PHONO,
TAPE/MD, FM/AM
Operating buttons for audio/video components
(29, 30)
~
Ÿ
POWER button and STANDBY lamp (8)
SOURCE NAME (TV SOUND/DBS) button
(11)
Display (8)
ONE TOUCH OPERATION/INPUT ATT.
button (15)
DSP MODE button (21)
SURROUND button and lamp (25)
Remote sensor (7)
POWER
CATV/SAT
TV
VCR
AUDIO
~
Ÿ
DVD TV SOUND/ DBS VCR
SLEEP
Ÿ
fi
!
⁄
ANALOG/DIGITAL
CD
PHONO
TAPE/MD
FM/AM
!
3
8
@
¤
#
‹
$
›
%
fi
^
^
⁄
@
¤
#
‹
REC PAUSE button (30)
!
⁄
@
¤
CATV
CONTROL
REC PAUSE
SURROUND
SURROUND button (25)
CATV CH +/– buttons (31)
SURROUND MODE button (21)
• 10 keys for selecting preset channel (17)
• 10 keys for adjusting sound (22 – 24, 29)
• 10 keys for operating audio/video components
(29, 30)
TV/VIDEO button (30)
MUTING button (9)
TV CH +/– buttons (30)
SLEEP button (15)
ANALOG/DIGITAL button (14)
CATV CONTROL (31)
SOUND button (21)
VCR CH +/– buttons (30)
CD-DISC button (29)
VOLUME +/– buttons (9)
TV VOL +/– buttons (30)
7
fl
ADJUST button (10) *
SOUND
SETTING button (12 – 14) *
MASTER VOLUME control (9)
MEMORY button (16)
MULTI CURSOR buttons
ANALOG/DIGITAL button and DIGITAL
AUTO lamp (14)
Source selecting buttons (8)
DVD, TV SOUND/DBS,VCR, CD, TAPE/MD,
PHONO, FM/AM *
SOURCE NAME (TAPE/MD) button
(8, 11, 14)
&
‡
SURROUND
MODE
CATV CH VCR CH
CD - DISC
SUBWOOFER
CNTR
*
#
‹
1
2
3
4
REAR•R
REAR•L
7/P
8
ENTER
5
EFFECT
9
6
TEST
0
MENU
$
›
%
fi
^
fl
&
‡
*
°
(
10
RETURN
+10
100+
fl
&
TV/ VIDEO
$
TV CH
TV VOL VOLUME
MUTING
°
(
›
%
R/M-SRX6500J REMOTE CONTROL
‡
*
SPEAKERS 1/2 buttons (9)
PHONES jack (9)
IM P ORTANT:
To use MULTI CURSOR buttons (fi) on the front panel:
What these buttons actually do depends on which function you are trying to adjust. Before using these buttons, select the function by
pressing one of the buttons marked with *.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Get t ing S t a r t ed
This section explains how to connect audio/ video components and speakers to the receiver, and how to connect the
power supply.
Befor e Ins t a lla t ion
Gener a l
Connect ing t he FM a nd AM Ant enna s
FM Ant enna Connect ions
• Be sure your hands are dry.
• Turn the power off to all components.
• Read the manuals supplied with the components you are going to
connect.
ANTENNA
ANTENNA
FM 75
FM 75
COAXIAL
A
B
COAXIAL
Loca t ions
AM
LOOP
AM
LOOP
• Install the receiver in a location that is level and protected from
moisture.
AM
EXT
AM
EXT
• The temperature around the receiver must be between –5˚C and
35˚C (23˚F and 95˚F).
• Make sure there is good ventilation around the receiver. Poor
ventilation could cause overheating and damage the receiver.
FM Antenna
Extend the supplied FM antenna horizontally.
ANENNA
FM 75
COAXIAL
Ha ndling t he r eceiver
• Do not insert any metal object into the receiver.
• Do not disassemble the receiver or remove screws, covers, or
cabinet.
• Do not expose the receiver to rain or moisture.
AM
LOOP
Outdoor FM Antenna Cable
Checking t he S upplied Acces s or ies
AM
EXT
Check to be sure you have all of the following items, which are
supplied with the receiver.
The number in the parentheses indicates the quantity of the pieces
supplied.
A. Using a Supplied FM Antenna
The FM antenna provided can be connected to the FM 75Ω
COAXIAL terminal as temporary measure.
• Remote Control (1)
B. Using a Standard Type Connector (Not Supplied)
A standard type connector should be connected to the FM 75Ω
COAXIAL terminal.
• Batteries (2)
• AM Loop Antenna (1)
• FM Antenna (1)
Note:
If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (the kind with a round wire going
to an outdoor antenna), disconnect the supplied FM antenna.
If anything is missing, contact your dealer immediately.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba s ic connect ing pr ocedur e
AM Ant enna Connect ions
2
3
1
Snap the tabs on the loop flame
ANTENNA
into the slots of the base to
assemble the AM loop.
FM 75
COAXIAL
AM
LOOP
1 Cut, twist and remove the insulation at the end of
each speaker signal cable (not supplied).
AM Loop Antenna
AM
EXT
2 Open the terminal and then insert the speaker
signal cable.
2
1
3
3 Close the terminal.
Connect ing t he fr ont s pea ker s
You can connect two pairs of front speakers (one pair to the FRONT
SPEAKERS 1 terminals, and another pair to the FRONT
SPEAKERS 2 terminals).
Outdoor single vinyl-covered wire
(not supplied)
Right speaker
FRONT SPEAKERS 1
Left speaker
Turn the loop antenna until you have the best reception.
FRONT SPEAKERS
RIGHT
LEFT
Notes:
• Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. This could cause poor
reception.
1
2
1
2
• If reception is poor, connect an outdoor single vinyl-covered wire to
the AM EXT terminal. (Keep the AM loop antenna connected.)
Connect ing t he S pea ker s
Right speaker
FRONT SPEAKERS 2
Left speaker
You can connect the following speakers:
• Two pairs of front speakers to produce normal stereo sound.
• One pair of rear speakers to enjoy the surround effect.
• One center speaker to produce more effective surround effect (to
emphasize human voices).
Connect ing t he r ea r a nd cent er s pea ker s
Connect rear speakers to the REAR SPEAKERS terminals and a
center speaker to the CENTER SPEAKER terminals.
• One subwoofer to enhance the bass.
IM P ORTANT:
After connecting the speakers listed above, set the speaker
setting information properly to obtain the best possible DSP
effect. For details, see page 12.
CENTER
SPEAKER
RIGHT LEFT
For each speaker (except for a subwoofer), connect the (–) and (+)
terminals on the rear panel to the (–) and (+) terminals marked on
the speakers. For connecting a subwoofer, see page 5.
Center speaker
Right rear
speaker
Left rear
speaker
REAR
SPEAKERS
CAUTION:
Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect ing t he s ubwoofer s pea ker
Turntable
Turntable
You can enhance the bass by connecting a subwoofer.
Connect the input jack of a powered subwoofer to the
SUBWOOFER OUT jack on the rear panel, using a cable with RCA
pin plugs (not supplied).
PHONO
CD
To audio
output
ANTENNA
FM 75
COAXIAL
TV SOUND
/DBS
OUT
(REC)
SUBWOOFER
OUT
VCR
AM
LOOP
IN
(PLAY)
AM
EXT
OUT
(REC)
TAPE
/MD
IN
(PLAY)
RIGHT
LEFT
If an earth cable is provided for
Powered subwoofer
AUDIO
your turntable, connect the cable
to the terminal marked (H) of the
ANTENNA terminals on the rear
panel.
Connect ing Audio/ Video Com ponent s
You can connect the following audio/video components to this
receiver. Refer also to the manuals supplied with your components.
Note:
Audio Components
• CD player*
Video Components
• DVD player*
• TV
Any turntables incorporating a small-output cartridge such as an MC
(moving-coil type) must be connected to this receiver through a
commercial head amplifier or step-up transformer. Direct connection
may result in insufficient volume.
• Turntable
• Cassette deck
or MD recorder*
• DBS tuner*
• VCR
Cassette deck or MD recorder
* You can connect these components using the methods described
in “Analog connections” (below) or in “Digital connections” (see
page 7).
Cassette deck
To audio output
To audio input
Ana log connect ions
Audio com ponent connect ions
TV SOUND
/DBS
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.
OUT
(REC)
VCR
IN
(PLAY)
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
OUT
(REC)
TAPE
/MD
IN
(PLAY)
RIGHT
LEFT
AUDIO
CD player
PHONO
CD player
To audio input
To audio output
MD recorder
CD
TV SOUND
/DBS
Note:
To audio output
OUT
(REC)
You can connect either a cassette deck or an MD recorder to the
TAPE/MD jacks. When connecting an MD recorder to the TAPE/MD
jacks, change the source name, which will be shown on the display
when selected as the source, to “M D.” See page 11 for details.
VCR
IN
(PLAY)
OUT
(REC)
TAPE
/MD
If your audio components have a COMPU LINK-3 terminal
See also page 26 for detailed information about the connection and
the COMPU LINK-3 remote control system.
IN
(PLAY)
RIGHT
LEFT
AUDIO
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Video com ponent connect ions
TV and/or DBS tuner
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the video jack.
When connecting the TV to the TV SOUND/DBS jacks, DO NOT
IMPORTANT:
connect the TV’s video output to the video input terminal.
This receiver is equipped with both the composite video and S-video
input terminals for the DVD player connection.
You do not have to connect both the composite video and S-video
terminals.
DIGITAL 1
(DVD)
PHONO
CD
AUDIO
DVD
RIGHT
LEFT
VIDEO
DIGITAL 2 (CD)
However, remember that the video signals from the composite
video input terminal are output only through the composite
video output terminals, while the ones from the S-video input
terminal are output only through the S-video output terminal.
Therefore, if your DVD player is connected to the receiver only
through the S-video input terminal, you cannot record the picture
from the DVD player on the VCR.
DVD
DBS
TV SOUND
/DBS
PCM / DOLBY DIGITAL
/ DTS
To audio
output
DIGITAL IN
OUT
(REC)
OUT
(REC)
VCR
VCR
IN
(PLAY)
IN
(PLAY)
OUT
(REC)
MONITOR
OUT
TAPE
/MD
In addition, if the TV and the DVD player are connected to the
receiver through the different video terminals, you cannot view the
playback picture from the DVD player on the TV.
VIDEO
IN
(PLAY)
S-VIDEO
RIGHT
LEFT
AUDIO
TV
DVD player
To composite video input
C
A
B
To S-video input (for better
playback picture quality)
DVD player
DVD
Connect the TV to the MONITOR
OUT jack to view the playback
picture from the other connected
video components.
AUDIO
DVD
RIGHT
LEFT
VIDEO
DVD
DBS
OUT
(REC)
VCR
IN
(PLAY)
DIGITAL 1
(DVD)
PHONO
CD
AUDIO
DVD
LEFT
MONITOR
OUT
RIGHT
VIDEO
DIGITAL 2 (CD)
VIDEO
DVD
S-VIDEO
TV SOUND
/DBS
DBS
PCM / DOLBY DIGITAL
/ DTS
Å To front left/right channel audio output (or to audio mixed
output if necessary)
ı To composite video output
DIGITAL IN
OUT
(REC)
OUT
(REC)
VCR
VCR
IN
(PLAY)
IN
(PLAY)
Ç To S-video output (for better playback picture quality)
OUT
(REC)
MONITOR
OUT
VCR
TAPE
/MD
VIDEO
IN
(PLAY)
VCR
To audio
output
C
A
S-VIDEO
RIGHT
LEFT
AUDIO
DBS
B
D
DBS tuner
To composite video output
DIGITAL 1
(DVD)
PHONO
CD
AUDIO
DVD
RIGHT
LEFT
VIDEO
Note:
DIGITAL 2 (CD)
DVD
DBS
When connecting the DBS tuner to the TV SOUND/DBS jacks,
change the source name, which will be shown on the display when
selected as the source, to “DBS.” See page 11 for details.
TV SOUND
/DBS
PCM / DOLBY DIGITAL
/ DTS
DIGITAL IN
OUT
(REC)
OUT
(REC)
VCR
VCR
IN
(PLAY)
IN
(PLAY)
If your audio components have an AV COMPU LINK terminal
See also page 27 for detailed information about the connection and
the AV COMPU LINK remote control system.
OUT
MONITOR
OUT
(REC)
TAPE
/MD
VIDEO
IN
(PLAY)
S-VIDEO
RIGHT
LEFT
AUDIO
Å To left/right channel audio output
ı To left/right channel audio input
Ç To composite video output
Î To composite video input
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Digit a l connect ions
Connect ing t he P ower Cor d
This receiver is equipped with two DIGITAL IN terminals — one
digital coaxial terminal and one digital optical terminal.
You can connect any component to one of the digital terminals using
a digital coaxial cable (not supplied) or digital optical cable (not
supplied).
Before plugging the receiver into an AC outlet, make sure that all
connections have been made.
Plug the power cord into an AC outlet.
Keep the power cord away from the
connecting cables and the antenna. The
IMPORTANT:
power cord may cause noise or screen interference. We recommend
that you use a coaxial cable to connect the antenna, since it is well-
shielded against interference.
• When connecting the DVD player or the DBS tuner using the digital
terminal, you also need to connect it to the video jack on the rear.
Without connecting it to the video jack, you can view no playback
picture.
Note:
• After connecting the components using the DIGITAL IN terminals,
set the following correctly if necessary.
The preset settings such as preset channels and sound adjustment
may be erased in a few days in the following cases:
– Set the digital input (DIGITAL IN) terminal setting correctly. For
details, see “Digital Input (DIGITAL IN) Terminal Setting” on page
14.
– Select the digital input mode correctly. For details, see “Selecting
the Analog or Digital Input Mode” on page 14.
– When you unplug the power cord.
– When a power failure occurs.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp the plug so as not to damage the cord.
DBS tuner
DVD player
DBS
DVD
P ut t ing Ba t t er ies in t he Rem ot e Cont r ol
CD player
MD recorder
Before using the remote control, put two supplied batteries first.
When using the remote control, aim the remote control directly at
the remote sensor on the receiver.
3
2
1
When the component has a digital
coaxial output terminal, connect it to the
DIGITAL 1 (DVD) terminal, using a
digital coaxial cable (not supplied).
DIGITAL 1
(DVD)
When the component has a digital
optical output terminal, connect it to the
DIGITAL 2 (CD), using a digital optical
cable (not supplied).
1. On the back of the remote control, remove the
battery cover.
DIGITAL 2 (CD)
PCM / DOLBY DIGITAL
/ DTS
2. Insert batteries. Make sure to match the polarity:
(+) to (+) and (–) to (–).
DIGITAL IN
Before connecting a digital
optical cable, unplug the
protective plug.
3. Replace the cover.
If the range or effectiveness of the remote control decreases, replace
the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.
CAUTION:
Notes:
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity: (+)
to (+) and (–) to (–).
• When shipped from the factory, the DIGITAL IN terminals has been
set for use with the following components.
• Use the correct type of batteries. Batteries that look similar may
differ in voltage.
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For CD player
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
• When you want to operate the CD player or MD recorder using the
COMPU LINK remote control system, connect the target
component also as described in “Analog connections” (see page 5).
• When you want to operate the DVD player using the AV COMPU
LINK remote control system, connect the DVD player also as
described in “Analog connections” (see page 5).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba s ic Oper a t ions
The following operations are commonly used when you play any sound source.
Tur ning t he P ower On a nd Off (S t a ndby)
Selected source name appears
On t he fr ont pa nel:
STANDBY
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
POWER
the display.
Current source name appears
DVD
Select the DVD player for viewing the stereo
digital video disc.
TV SOUND/DBS Select the TV sound (or the DBS tuner).
VCR
Select the video component connected to the
VCR jacks.
Select the CD player.
Select the cassette deck (or the MD recorder).
Select the turntable.
Select an FM or AM broadcast.
• Each time you press the button, the band
alternates between FM and AM.
Current volume level is shown here
To turn off the power (into standby mode),
CD *
STANDBY
TAPE/MD *
PHONO *
FM/AM *
press POWER again.
The STANDBY lamp lights up. A small amount
of power is consumed in standby mode. To turn
the power off completely, unplug the AC power
cord.
POWER
Notes:
Fr om t he r em ot e cont r ol:
AUDIO
• When connecting an MD recorder (to the TAPE/MD jacks) or a DBS
tuner (to the TV SOUND/DBS jacks), change the source name that
appears on the display. See page 11 for details.
• When you press one of the source selecting buttons on the remote
control marked above with an asterisk (*), the receiver
automatically turns on.
To turn on the power, press AUDIO POWER.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby mode),
press AUDIO POWER again.
S igna l a nd s pea ker indica t or s on t he dis pla y
The STANDBY lamp lights up.
• The signal indicators light up to indicate the incoming channel
signals.
– Only the indicators for the incoming signals light up. (When
analog input is selected, “L” and “R” always light up.)
• The frame of the signal indicator (except for “LFE”: See notes
below) lights up if the corresponding speaker is set to “LARGE”
or “SMALL” (for subwoofer, “YES”).
S elect ing t he S our ce t o P la y
Press one of the source selecting buttons.
On t he fr ont pa nel:
C
L
R
DVD
TV SOUND/DBS
VCR
SUBWFR LFE
S
LS
RS
SOURCE NAME
TAPE/MD
CD
PHONO
FM/AM
L:
Light up when the left front channel signal comes in.
The frame of this signal indicator always lights up.
Light up when the right front channel signal comes in.
The frame of this signal indicator always lights up.
Light up when the center channel signal comes in.
SOURCE NAME
R:
C:
Fr om t he r em ot e cont r ol:
LS: Light up when the left rear channel signal comes in.
RS: Light up when the right rear channel signal comes in.
TV SOUND/ DBS
DVD
CD
VCR
S:
Light up when the monaural rear channel signal comes in.
LFE: Light up when the LFE channel signal comes in.
PHONO
FM/AM
Notes:
• When the LFE channel signal comes in, “LFE” lights up.
• When “SUBWOOFER” is set to “YES,” (See page 15)
lights up.
TAPE/MD
SUBWFR
8
Download from Www.Somanuals.com. All Manuals Search And Download.
S elect ing differ ent s our ces for pict ur e a nd s ound
S elect ing t he Fr ont S pea ker s
You can watch picture from a video component while listening to
sound from another component. Press one of the audio source
selecting buttons (CD, TAPE/MD, PHONO, FM/AM, TV
SOUND*), while viewing the picture from a video component such
as the VCR or DVD player, etc.
On t he fr ont pa nel ONLY:
SPEAKERS
1
2
When you have connected two pairs of the front
speakers, you can select which to use. Pressing
SPEAKERS 1 or SPEAKERS 2 activates the
respective set of speakers.
_ ON O
On t he fr ont pa nel:
TV SOUND/DBS
• To use the speakers connected to the FRONT SPEAKERS 1
terminals, press SPEAKERS 1 to set it in the _ ON position, and
press SPEAKERS 2 to set it in the — OFF position.
SOURCE NAME
CD
TAPE/MD
PHONO
FM/AM
• To use the speakers connected to the FRONT SPEAKERS 2
terminals, press SPEAKERS 2 to set it in the _ ON position, and
press SPEAKERS 1 to set it in the — OFF position.
SOURCE NAME
• To use both sets of the speakers, press SPEAKERS 1 and
SPEAKERS 2 to set them in the _ ON position.
• To use neither set of the speakers, press SPEAKERS 1 and
SPEAKERS 2 to set them in the — OFF position.
Fr om t he r em ot e cont r ol:
TV SOUND/ DBS
CD
PHONO
Note:
When only one set of the speakers is connected to either the FRONT
SPEAKERS 1 or 2 terminals, do not activate both pairs of the
speakers. If you do, no sound comes out of the front speakers.
TAPE/MD
FM/AM
Lis t ening only wit h hea dphones
Notes:
1. Connect a pair of headphones to the PHONES jack on the front
• Once you have selected a video source, pictures of the selected
source are sent to the TV until you select another video source.
* Except when your TV is connected through the AV COMPU LINK
remote control system (see page 27).
panel.
2. Press SPEAKERS 1 and SPEAKERS 2 to set them in the —
OFF position.
Adjus t ing t he Volum e
CAUTION:
Be sure to turn down the volume before connecting or putting on the
headphones, as high volume can damage both the headphones and
your hearing.
On t he fr ont pa nel:
MASTER VOLUME
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it
counterclockwise.
• When you turn MASTER VOLUME rapidly,
the volume level also changes rapidly.
• When you turn MASTER VOLUME slowly,
the volume level also changes slowly.
Note:
You cannot shut off the sound through the other speakers using the
SPEAKERS 1 and 2 buttons.
M ut ing t he S ound
Fr om t he r em ot e cont r ol:
Fr om t he r em ot e cont r ol ONLY:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
MUTING
VOLUME
Press MUTING to mute the sound through all
speakers and headphones connected.
“MUTING” appears on the display and the
volume turns off (the volume level indicator goes
off).
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
To restore the sound, press MUTING again so that “OFF” appears
on the display.
Note:
• Turning MASTER VOLUME on the front panel or pressing
VOLUME +/– on the remote control also restores the sound.
The volume level can be adjusted within the range of “0” (minimum) to
“80” (maximum).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjus t ing t he S ubwoofer Out put Level
Reinfor cing t he Ba s s
You can adjust the subwoofer output level if you have selected
“YES” for the “SUBWOOFER” (see page 15).
With this Bass Boost function, you can boost the bass level.
Once it has been adjusted, the receiver memorizes the adjustment.
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
On t he fr ont pa nel ONLY:
ADJUST
1. Press ADJUST repeatedly until
On t he fr ont pa nel:
“BASSBOOST” (with the current
setting) appears on the display.
• Once you have pressed ADJUST, MULTI CURSOR % / fi
also can be used for selecting “BASSBOOST.”
ADJUST
1. Press ADJUST repeatedly until
“SUBWFR LEVEL” appears on
the display.
• Once you have pressed ADJUST, MULTI CURSOR % / fi
can be also used for selecting “SUBWFR LEVEL.”
• The display changes to show the current setting.
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
switch this function “ON” or
“OFF.”
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
• When this function is switched “ON,” the
BASS BOOST indicator on the display
lights up.
adjust the subwoofer output level
(–10 dB to +10 dB).
Fr om t he r em ot e cont r ol:
Note:
SOUND
The Bass Boost function affects the front speaker sounds only.
1. Press SOUND.
The 10 keys are activated for sound adjustments.
SUBWOOFER
2. Press SUBWOOFER –/+ to adjust
Adjus t ing t he Tone
the subwoofer output level (–10 dB
to +10 dB).
2
1
You can adjust the treble and bass sounds as you like.
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
At t enua t ing t he Input S igna l
When the input level of the playing source is too high, the sounds
will be distorted. If this happens, you need to attenuate the input
signal level to prevent the sound distortion.
On t he fr ont pa nel ONLY:
ADJUST
1. Press ADJUST repeatedly until
“BASS” or “TREBLE” appears on
On t he fr ont pa nel ONLY:
the display.
ONE TOUCH OPERATION/
Press and hold INPUT ATT. (ONE TOUCH
INPUT ATT.
• Once you have pressed ADJUST, MULTI CURSOR % / fi
can be also used for selecting “BASS” or “TREBLE.”
• Select “BASS” to adjust the bass sound level.
• Select “TREBLE” to adjust the treble sound level.
OPERATION) so that the ATT indicator
lights up on the display.
• Each time you press and hold the button, the
Input Attenuator mode turns on (“INPUT ATT
ON”) or off (“INPUT NORMAL”).
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
Notes:
adjust the bass or treble sound
level within the range of –10 to
• This function is available only for the sources connected using the
analog terminals.
• This function does not take effect when digital input is selected.
+10.
• Each time you press the button, the sound
level changes by ± 2 steps.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba s ic S et t ings
Some of the following settings are required after connecting and positioning your speakers in your listening room, while
others will make operations easier.
Recor ding a S our ce
Cha nging t he S our ce Na m e
You can record any source playing through the receiver to a cassette
deck (or an MD recorder) connected to the TAPE/MD jacks and the
VCR connected to the VCR jacks at the same time.
When you have connected the MD recorder to the TAPE/MD jacks
or the DBS tuner to the TV SOUND/DBS jacks on the rear panel,
change the source name shown on the display when you select the
MD recorder or the DBS tuner as the source.
While recording, you can listen to the selected sound source at
whatever sound level you like, without affecting the sound levels of
the recording.
On t he fr ont pa nel ONLY:
When changing the source name from “TAPE” to “MD”:
TAPE/MD
Note:
1. Press TAPE/MD.
The output volume level, tone adjustment (see page 10) and bass
boost (see page 10) cannot affect the recording.
• Make sure “TAPE” appears on the display.
SOURCE NAME
2. Press and hold SOURCE NAME
(TAPE/MD) until “ASSGN. MD”
appears on the display.
Adjus t ing t he Fr ont S pea ker Out put
Ba la nce
If the sounds you hear from the front right and left speakers are
unequal, you can adjust the speaker output balance.
To change the source name from “MD” to “TAPE,” repeat
the same procedure above (in step 1, make sure “M D” appears
on the display).
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
When changing the source name from “TV SOUND” to “DBS”:
TV SOUND/DBS
1. Press TV SOUND/DBS.
On t he fr ont pa nel ONLY:
• Make sure “TV SOUND” appears on the
display.
ADJUST
SOURCE NAME
1. Press ADJUST repeatedly until
“L/R BALANCE” appears on the
display.
2. Press and hold SOURCE NAME
(TV SOUND/DBS) until “ASSGN.
DBS” appears on the display.
• Once you have pressed ADJUST, MULTI CURSOR % / fi can
be also used for selecting “L/R BALANCE.”
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
To change the source name from “DBS” to “TV SOUND,”
repeat the same procedure above (in step 1, make sure “DBS”
appears on the display).
adjust the balance.
• Pressing @ decreases the right channel
output (from “L-21” to “R-21”).
• Pressing # decreases the left channel
output (from “R-21” to “L-21”).
Note:
Without changing the source name, you can still use the connected
components. However, there may be some inconvenience.
– “TAPE” or “TV SOUND” will appear on the display when you select
the MD recorder or DBS tuner.
– You cannot select the digital input (see page 14) for the MD
recorder and the DBS tuner.
– You cannot use the COMPU LINK remote control system (see page
26) to operate the MD recorder.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Cent er Dela y Tim e S et t ing
S et t ing t he S pea ker s for t he DS P M odes
Register the delay time of the sound from the center speaker,
comparing that of the sound from the front speakers.
To obtain the best possible surround sound of the DSP (Digital
Signal Processor) modes (see page 18), you have to register the
information about the speakers arrangement after all connections are
completed.
If the distance from your listening point to the center speaker is
equal to that to the front speakers, select 0 msec. As the distance to
the center speaker becomes shorter, increase the delay time.
• 1 msec increase (or decrease) in delay time corresponds to 11 13/16
inches (30 cm) decrease (or increase) in distance.
Before you start, remember...
• When shipped from the factory, delay time is set to 0 msec.
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
On t he fr ont pa nel ONLY:
SETTING
1. Press SETTING repeatedly until
Fr ont , Cent er, a nd Rea r S pea ker S et t ing
Register the sizes of all the connected speakers.
“CENTER DELAY” appears on
the display.
• Once you have pressed SETTING, MULTI CURSOR % / fi
can be also used for selecting “CENTER DELAY.”
• The display changes to show the current setting.
On t he fr ont pa nel ONLY:
SETTING
1. Press SETTING repeatedly until
“FRONT SPK” (Front Speaker),
“CENTER SPK” (Center
Speaker), or “REAR SPK” (Rear
Speaker) appears on the display.
• Once you have pressed SETTING, MULTI CURSOR % / fi
can be also used for selecting the speakers.
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
select the delay time of the center
speaker output.
• Pressing # increases the delay time from
0 msec (“C. DELAY: 0ms”) to 5 msec (“C.
DELAY: 5ms”).
MULTI CURSOR
• Pressing @ decreases the delay time from
5 msec (“C. DELAY: 5ms”) to 0 msec (“C.
DELAY: 0ms”).
2. Press MULTI CURSOR @ / # to
select the appropriate item about
the speaker selected in the above
step.
• As you press it, the display changes to
show the following:
Rea r Dela y Tim e S et t ing
Register the delay time of the sound from the rear speakers,
comparing that of the sound from the front speakers.
If the distance from your listening point to the rear speakers is equal
to that to the front speakers, select 0 msec. As the distance to the rear
speakers becomes shorter, increase the delay time.
SMALL
NONE
LARGE
• 1 msec increase (or decrease) in delay time corresponds to 11 13/16
inches (30 cm) decrease (or increase) in distance.
LARGE: Select this when the speaker size is relatively large.
SMALL: Select this when the speaker size is relatively small.
• Rear delay time for Dolby Digital and DTS Digital Surround is to
be set to 5 msec.
• When shipped from the factory, delay time is set to 5 msec.
NONE: Select this when you have not connected a speaker.
(Not selectable for the front speakers)
3. Repeat steps 1 and 2 to select the appropriate
items for the other speakers.
On t he fr ont pa nel ONLY:
SETTING
1. Press SETTING repeatedly until
“REAR DELAY” appears on the
display.
• Once you have pressed SETTING, MULTI CURSOR % / fi
can be also used for selecting “REAR DELAY.”
• The display changes to show the current setting.
Notes:
• Keep the following comment in mind as reference when adjusting.
– If the size of the cone speaker unit built in your speaker is greater
than 4 3/4 inches (12 cm), select “LARGE,” and if it is smaller than
4 3/4 inches (12 cm), select “SMALL.”
• If you have selected “NO” for the subwoofer setting, you can only
select “LARGE” for the front speaker setting.
• If you have selected “SMALL” for the front speaker setting, you
cannnot select “LARGE” for the center and rear speaker settings.
• When you change your speakers, you need to register the
information about the speaker again.
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
select the delay time of the rear
speaker output.
• Pressing # increases the delay time from
0 msec (“R. DELAY: 0ms”) to 15 msec
(“R. DELAY: 15ms”).
• Pressing @ decreases the delay time from
15 msec (“R. DELAY: 15ms”) to 0 msec
(“R. DELAY: 0ms”).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Cr os s over Fr equency S et t ing
Low Fr equency Effect At t enua t or S et t ing
Small speaker cannot reproduce the bass sound very well. So, if you
have used a small speaker any for the front, center, or rear channels,
this receiver automatically reallocates the bass elements, originally
assigned to the channel for which you have connected the small
speaker, to another channel (for which you have connected the large
speaker).
If the bass sound is distorted while playing back a source using
Dolby Digital or DTS Digital Surround, follow the procedure below.
• This function takes effect only when the subwoofer (LFE) signals
come in (with “SUBWOOFER” set to “Yes”).
On t he fr ont pa nel ONLY:
If you have selected “LARGE” for all speakers (see page 12), this
function will not take effect. To use this function properly, you need
to set this crossover frequency level according to the size of the
small speaker connected.
SETTING
1. Press SETTING repeatedly until
“LFE ATT” (Low Frequency
Effect Attenuator) appears on the
display.
This function takes effect in the following cases:
- When playing a source using Dolby Pro Logic, Dolby Digital,
or DTS Digital Surround.
• Once you have pressed SETTING, MULTI CURSOR % / fi
can be also used for selecting “LFE ATT.”
• The display changes to show the current setting.
- When using the DAP modes.
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
On t he fr ont pa nel ONLY:
select the low frequency effect
SETTING
1. Press SETTING repeatedly until
attenuator level.
• As you press it, the display changes to
show the following:
“CROSSOVER FRQ” (Crossover
Frequency) appears on the display.
• Once you have pressed SETTING, MULTI CURSOR % / fi
can be also used for selecting “CROSSOVER FRQ.”
• The display changes to show the current setting.
0dB
10dB
0dB:
Normally select this.
MULTI CURSOR
10dB:
Select this when the bass sound is distorted.
2. Press MULTI CURSOR @ / # to
select the crossover frequency level
according to the size of the small
speaker connected.
Dyna m ic Ra nge Com pr es s ion S et t ing
You can compress the dynamic range (difference between maximum
sound and minimum sound) of the reproduced sound. This is useful
when enjoying surround sound at night.
• This function takes effect only when playing back a source using
Dolby Digital.
• As you press it, the display changes to show the following:
80Hz
100Hz
120Hz
• Use the following comments as reference when adjusting.
On t he fr ont pa nel ONLY:
80Hz:
Select this when the cone speaker unit built in the
speaker is about 4 3/4 inches (12 cm).
SETTING
1. Press SETTING repeatedly until
“D. RANGE COMP.” (Dynamic
Range Compression) appears on
the display.
• Once you have pressed SETTING, MULTI CURSOR % / fi
can be also used for selecting “D. RANGE COMP.”
• The display changes to show the current setting.
100Hz:
120Hz:
Select this when the cone speaker unit built in the
speaker is about 3 15/16 inches (10 cm).
Select this when the cone speaker unit built in the
speaker is about 3 3/16 inches (8 cm).
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
select the appropriate item about
the compression level.
• As you press it, the display changes to
show the following:
OFF
MID
MAX
OFF:
MID:
MAX:
Select this when you want to enjoy surround with its
full dynamic range. (No effect applied)
Select this when you want to reduce the dynamic
range a little. (Factory setting)
Select this when you want to apply the compression
effect fully. (Useful at night)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Follow the steps in “Digital Input (DIGITAL IN)
Terminal Setting” to the left.
Digit a l Input (DIGITAL IN) Ter m ina l
S et t ing
2. Press the source selecting button (CD, TAPE/MD,
TV SOUND/DBS, or DVD) for which you want to
change the input mode from analog input to
digital input.
When you use the digital input terminals, you have to register what
components are connected to which terminals (DIGITAL IN 1/2).
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
TV SOUND/ DBS
DVD
DVD
TV SOUND/DBS
SOURCE NAME
TAPE/MD
CD
On t he fr ont pa nel ONLY:
CD
1. Press SETTING repeatedly until
SETTING
SOURCE NAME
TAPE/MD
“DIGITAL IN” appears on the
display.
• Once you have pressed SETTING, MULTI
CURSOR % / fi can be also used for
selecting “DIGITAL IN.”
On the front panel
On the remote control
3. Press ANALOG/DIGITAL repeatedly until the
digital input mode you want appears on the
display.
• The display changes to show the current setting.
DIGITAL 2 terminal setting
ANALOG/DIGITAL
ANALOG/DIGITAL
AUTO
DIGITAL 1 terminal setting
On the front panel
On the remote control
MULTI CURSOR
2. Press MULTI CURSOR @ / # to
Each time you press the button, the input mode changes as
follows:
select an appropriate setting.
• As you press it, the display changes to
show the following:
AUTO/PCM
ANALOG
(Digital)
DOLBY DIGITAL
DTS
1 DVD 2 CD “ 1 DVD 2 DBS “ 1 DVD 2 MD “
(Digital)
(Digital)
1 CD 2 DVD “ 1 CD 2 DBS “ 1 CD 2 MD
“
Normally select “AUTO/PCM,” so the receiver automatically
detects the incoming digital signal. The DIGITAL AUTO
indicator lights up on the display. (The DIGITAL AUTO lamp
next to the ANALOG/DIGITAL button lights up.)
- When the receiver can recognize the digital signal coming
into the receiver, the frame of the digital signal indicator for
the detected signal lights up automatically.
- When the receiver cannot recognize the incoming signal
correctly, the frame of the digital signal indicator flashes.
If this happens, select the same digital input mode with the
incoming digital signal — either “DOLBY DIGITAL” or
“DTS.”
1 DBS 2 DVD “ 1 DBS 2 CD “ 1 DBS 2 MD “
1 MD 2 DVD “ 1 MD 2 CD “ 1 MD 2 DBS “
(back to the beginning)
Note:
When shipped from the factory, the DIGITAL IN terminals can be used
as the digital input for the following components.
• DIGITAL 1 (coaxial): For DVD player
• DIGITAL 2 (optical): For CD player
Select ing t he Analog or Digit al Input Mode
When you have connected some digital source components using the
digital terminals (see page 7), you need to change the input mode for
these components to the appropriate digital input mode correctly —
AUTO/PCM, DOLBY DIGITAL, or DTS.
Once the correct mode is selected for each digital source
component, the mode is memorized until you change it.
Notes:
• Noise may come out of the speakers while searching or skipping a
multi-sound source encoded with Dolby Digital or DTS Digital
Surround. If this happens, select “DOLBY DIGITAL” or “DTS” for
digital input mode. (See above.)
• When you change the source, the digital input mode will be
automatically reset to “AUTO/PCM.”
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the One Touch Operation function
Press ONE TOUCH OPERATION (INPUT ATT.) so that the ONE
TOUCH OPERATION indicator goes off.
(Even though the One Touch Operation function is canceled, the
recalled sound effects remain active.)
S et t ing t he S ubwoofer Infor m a t ion
Register whether or not you have connected a subwoofer.
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
Note:
If the source is FM or AM, you can assign a different setting for each
band.
On t he fr ont pa nel ONLY:
SETTING
1. Press SETTING repeatedly until
“SUBWOOFER” appears on the
display.
Us ing t he S leep Tim er
• Once you have pressed SETTING, MULTI CURSOR % / fi
can be also used for selecting “SUBWOOFER.”
• The display changes to show the current setting.
MULTI CURSOR
Using the Sleep Timer, you can fall asleep to music and know the
receiver will turn off by itself rather than play all night.
Fr om t he r em ot e cont r ol ONLY:
2. Press MULTI CURSOR @ / # to
SLEEP
Press SLEEP repeatedly.
select “YES” or “NO.”
The SLEEP indicator lights up on the display,
and the shut-off time changes as follows (in
minutes):
YES: Select this when a subwoofer is used.
10 20 30 40 50 60 70 80 90
NO:
Select this when no subwoofer is used.
(Canceled)
00
When the shut-off time comes
The receiver turns off automatically.
S t or ing t he Ba s ic S et t ings a nd
Adjus t m ent s — One Touch Oper a t ion
To check or change the time remaining until the shut-off time
Press SLEEP once.
The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press SLEEP repeatedly.
JVC’s One Touch Operation function is used to assign and store
different sound settings for each different playing source. By using
this function, you do not have to change the settings every time you
change the source. The stored settings for the newly selected source
are automatically recalled.
To cancel the Sleep Timer
Press SLEEP repeatedly until “SLEEP 00min.” appears on the
display. (The SLEEP indicator goes off.)
• Turning off the power also cancels the Sleep Timer.
The following can be stored for each source:
• Volume level (see page 9)
• Bass boost (see page 10)
• Tone adjustment (see page 10)
• Input attenuator mode (see page 10)
• Subwoofer output level (see page 10)
• Balance (see page 11)
• DSP modes
– 3D-PHONIC mode settings (see page 21)
– DAP mode settings (see page 21)
– Surround mode settings (see page 22)
On t he fr ont pa nel ONLY:
To store the sound settings
ONE TOUCH OPERATION/
INPUT ATT.
1. Press ONE TOUCH OPERATION
(INPUT ATT.) so that the ONE
TOUCH OPERATION indicator
lights up on the display.
2. Adjust the sound using the functions listed above.
The newly adjusted settings are memorized.
To recall the sound settings
With the ONE TOUCH OPERATION lamp lit, the settings for the
currently selected source are recalled when the source is selected.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Ra dio Br oa dca s t s
You can browse through all the stations or use the preset function to go immediately to a particular station.
Tuning in S t a t ions M a nua lly
Us ing P r es et Tuning
On t he fr ont pa nel ONLY:
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
FM/AM
1. Press FM/AM to select the band.
The MULTI CURSOR % / fi / @ / #
buttons can be now used for operating the
tuner.
To s t or e t he pr es et s t a t ions
Before you start, remember...
• Each time you press the button, the band alternates between
FM and AM.
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
On t he fr ont pa nel ONLY:
1. Tune in the station you want to preset (see
“Tuning in Stations Manually”).
If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the FM
Reception Mode” on page 17.
MULTI CURSOR
2. Press MULTI CURSOR % / fi
repeatedly until “ – TUNING +”
appears on the display.
MEMORY
2. Press MEMORY.
MULTI CURSOR
3. Press MULTI CURSOR @ / #
until you find the frequency you
want.
“CH-” appears and the channel number position starts flashing
on the display for about 5 seconds.
• Pressing @ decreases the frequency.
• Pressing # increases the frequency.
MULTI CURSOR
3. Press MULTI CURSOR @ / # to
Notes:
select a channel number while the
channel number position is
flashing.
• When you hold MULTI CURSOR @ / # in step 3, the frequency
keeps changing until a station is tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
When an FM stereo program is received, the STEREO indicator
also lights up.
Note:
You can use the 10 keys on the remote control to select the preset
number. When using the 10 keys, be sure that they are activated
for the tuner, not for the CD and others. (See page 29.)
MEMORY
4. Press MEMORY again while the
selected channel number is
flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5. Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To t une in a pr es et s t a t ion
On t he fr ont pa nel:
S elect ing t he FM Recept ion M ode
FM/AM
W hen a n FM s t er eo br oa dca s t is ha r d t o
r eceive or nois y
1. Press FM/AM to select the band.
• The MULTI CURSOR % / fi / @ / #
buttons can be now used for operating the
tuner.
You can change the FM reception mode while receiving an FM
broadcast.
• Each time you press the button, the band
alternates between FM and AM.
On t he fr ont pa nel ONLY:
FM/AM
1. If necessary, press FM/AM so
that the MULTI CURSOR % / fi
/ @ / # buttons can be now used
for operating the tuner.
• Each time you press the button, the band
alternates between FM and AM.
MULTI CURSOR
2. Press MULTI CURSOR % / fi
repeatedly until “ – PRESET +”
appears on the display.
MULTI CURSOR
2. Press MULTI CURSOR % / fi
repeatedly until “FM MODE”
appears on the display.
MULTI CURSOR
3. Press MULTI CURSOR @ / # to
MULTI CURSOR
select a preset channel station.
• Pressing @ decreases the preset channel
number.
3. Press MULTI CURSOR @ / # to
switch the FM reception to
• Pressing # increases the preset channel
number.
“AUTO MUTING” or “MONO.”
Fr om t he r em ot e cont r ol:
FM/AM
1. Press FM/AM.
• Each time you press the button, the band
alternates between FM and AM.
AUTO MUTING: When a program is broadcasted in stereo,
you will hear stereo sound; when in
2. Press 10 keys to select a preset channel number.
• For channel number 5, press 5.
monaural, you will hear monaural sounds.
This mode is also useful to suppress static
noise between stations. The AUTO
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10,
then 10.
MUTING indicator lights up on the display.
SUBWOOFER
CNTR
MONO:
Reception will be improved although you
will lose the stereo effect. In this mode, you
will hear noise while tuning into the
stations. The AUTO MUTING indicator
goes off on the display.
1
5
2
3
4
REAR•R
REAR•L
7/P
MENU
8
6
TEST
0
EFFECT
ENTER
10
RETURN
+10
100+
9
Note:
When you use the 10 keys on the remote control, be sure that they are
activated for the tuner, not for the CD and others. (See page 29.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Us ing t he DS P M odes
The built-in Surround Processor provides three types of the DSP (Digital Signal Processor) mode — 3 D-PHONIC mode,
DAP (Digital Acoustic Processor) mode and Surround mode.
3 D-P HONIC m odes
DAP m odes
The 3D-PHONIC mode gives you such a nearly surround effect as it
is reproduced through the Dolby Surround decoder, which is widely
used to reproduce sounds with a feeling of movement like those
experienced in movie theaters. The 3D-PHONIC mode is the result
of research on sound localization technology carried out at JVC for
many years. This mode can be used when the front speakers are
connected to this receiver (without respect to the rear/center
speaker connection).
The sound heard in a concert hall or club consists of direct sound
and indirect sound — early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection. On
the other hand, indirect sounds are delayed by the distances of the
ceiling and walls. These direct sounds and indirect sounds are the
most important elements of the acoustic surround effects. The DAP
mode can create these important elements, and gives you a real
“being there” feeling. This mode can be used when the front
speakers are connected to this receiver (without respect to the
rear/center speaker connection).
• You can select either 3D ACTION or 3D THEATER to your
preference when playing an analog or Linear PCM (digital)
source.
You can select one of the following to your preference.
3D ACTION: Best for action and war movies — where the
LIVE CLUB: Gives the feeling of a live music club with a low
action is fast and explosive.
ceiling.
3D THEATER: Reproduces the sound field of a large theater. This
mode can be selected when only front speakers are
connected to this receiver and “REAR SPK” and
DANCE CLUB: Gives a throbbing bass beat.
HALL:
Gives clear vocal and the feeling of a concert hall.
PAVILION:
Gives the spacious feeling of a pavilion with a high
ceiling.
“CENTER SPK” is set to “NONE” (see page 12).
Reflections from
behind
Early reflections
Direct sounds
Notes:
• If “REAR SPK” and “CENTER SPK” are set to “NONE,” you cannot
select Surround mode.
• No sounds come out of the center speaker, even if it is connected.
• When “REAR SPK” and “CENTER SPK” are set to “NONE,” the
same effect as used for the 3D-PHONIC is applied to any DAP
mode to maintain the surround elements with only two front
speakers.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
J VC Thea t er S ur r ound
HEAD P HONE m ode
In order to reproduce a more realistic sound field in your listening
room while playing soundtracks of software encoded with Dolby
This mode can reproduce the LFE channel signals, mixing them to
the front channel signals. So you will not miss the subwoofer sounds
even if you listen to a source using the headphones.
Surround (bearing the mark
Theater Surround.
DOLBY SURROUND
), you can use JVC
S ur r ound m odes
With this receiver, you can use three types of the Surround mode.
Following modes cannot be used when only the front speakers
are connected to this receiver (without the rear speakers or
center speaker).
Dolby S ur r ound (Dolby Digit a l a nd Dolby P r o Logic) *
Used to watch the soundtracks of software encoded with Dolby
Digital (bearing the mark
) or with Dolby Surround
D
I
G
I
T
L
(bearing the mark
A ).
DOLBY SURROUND
Dolby Digital and Dolby Pro Logic can be selected automatically
according to software played back and the speaker arrangement you
have done.
• To enjoy the software encoded with Dolby Digital, you must
connect the source component using the digital terminal on the
rear of this receiver. (See page 7.)
DTS Digit a l S ur r ound **
DTS Digital Surround is a discrete 5.1 channel digital audio format
available on CD, LD, and DVD software.
Notes:
To watch the soundtracks of video software bearing the mark
the receiver can provide you with DTS Digital Surround decoder.
DTS Digital Surround is automatically selected according to
,
• The DSP modes have no effect on monaural sources.
• The DSP modes will not be applied when recording a source.
• The PRO LOGIC indicator lights up when the Dolby Pro Logic
decoder built in this receiver is activated.
software played back and the speaker arrangement you have done.
• To enjoy the software encoded with DTS Digital Surround, you
must connect the source component using the digital terminal on
the rear of this receiver. (See page 7.)
Note:
When playing a CD encoded with DTS Digital Surround, select “DTS”
as the incoming digital signal type. (See page 14.)
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997 Dolby
Laboratories, Inc. All rights reserved.
**Manufactured under license from Digital Theater Systems, Inc. US
Pat. No. 5,451,942 and other world-wide patents issues and
pending. “DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc. ©1996 Digital Theater Systems, Inc.
All rights reserved.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ava ila ble DS P M odes Accor ding t o t he S pea ker Ar r a ngem ent
Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 12).
Speaker arrangements
Available DSP modes
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
TV
Front
Front
speaker
speaker
• 3D THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• HEAD PHONE
• DSP OFF (DSP mode is canceled)
Notes:
• You can only select “HEAD PHONE” while playing a multi-sound source
encoded with Dolby Digital or DTS Digital Surround.
• You cannot select the Surround mode with this speaker setting.
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
TV
Center speaker
Front
speaker
Front
speaker
By pressing DSP MODE:
• THEATER
By pressing SURROUND MODE:
• DOLBY/DTS SURROUND
(DOLBY PRO LOGIC, DOLBY
DIGITAL, or DTS SURROUND)
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• LIVE CLUB
• 3D ACTION
• HEAD PHONE
• DANCE CLUB
• HALL
• DSP OFF (DSP mode is canceled) • PAVILION
• 3D ACTION
• HEAD PHONE
• DSP OFF (DSP mode is canceled)
TV
Front
speaker
Front
speaker
To activate the Surround
mode, press SURROUND
button so that the lamp next to
the button lights up.
To activate the Surround
mode, you can also use the
SURROUND button.
Rear
speaker
Rear
speaker
TV
Front
Front
speaker
speaker
Center speaker
Rear
Rear
speaker
speaker
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjus t ing t he 3 D-P HONIC M odes
Adjus t ing t he DAP M odes a nd HEAD
P HONE m ode
Once you have adjusted the 3D-PHONIC modes, the adjustment is
memorized for each 3D-PHONIC mode.
Once you have adjusted the DAP modes, the adjustment is
memorized for each DAP mode.
Before you start, remember...
• Make sure that you have set the speaker information correctly
(see page 12).
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
Before you start, remember...
• Make sure that you have set the speaker information correctly
(see page 12).
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
• You cannot adjust the rear speaker output level when you have set
“REAR SPK” to “NONE.” See page 12.
On t he fr ont pa nel:
DSP MODE
1. Press DSP MODE repeatedly until
“3D ACTION” or “3D
• You cannot make any adjustment for the HEAD PHONE mode.
THEATER” appears on the
display.
The 3D-PHONIC, DSP, and Ÿ PRO LOGIC indicators also
light up on the display.
On t he fr ont pa nel:
DSP MODE
1. Press DSP MODE repeatedly until
the DAP mode — LIVE CLUB,
DANCE CLUB, HALL, or
ADJUST
2. Adjust the effect level.
PAVILION — or HEAD PHONE
1) Press ADJUST repeatedly until “DSP
EFFECT” appears on the display.
• Once you have pressed ADJUST,
MULTI CURSOR % / fi can be also
used for selecting “DSP EFFECT.”
• The display changes to show the
current setting.
appears on the display.
The DSP indicator also lights up on the display. (When the
HEAD PHONE is selected, HEAD PHONE indicator lights up,
instead of the DSP indicator.)
• When you have set “REAR SPK” to “NONE,” the 3D-
PHONIC indicator also lights up. (Except for “HEAD
PHONE.”)
MULTI CURSOR
2) Press MULTI CURSOR @ / # to
select the effect level.
2. Adjust the speaker output levels.
• As you press it, the effect level
changes as follows:
ADJUST
1) Press ADJUST repeatedly until one of
the following indications appears on
the display.
“REAR L LEVEL”:
DSP EFFECT 1
DSP EFFECT 2
DSP EFFECT 3
To adjust the left rear speaker level.
“REAR R LEVEL”:
To adjust the right rear speaker level.
• Once you have pressed ADJUST, MULTI CURSOR % / fi
can be also used for selecting the speaker.
DSP EFFECT 5
DSP EFFECT 4
As the number increases, the selected 3D-PHONIC mode
becomes stronger.
Fr om t he r em ot e cont r ol:
2) Press MULTI CURSOR @ / # to
MULTI CURSOR
SURROUND
1. Press SURROUND MODE
adjust the selected speaker output
level (from –10 dB to +10 dB).
3) Repeat 1) and 2) to adjust the other
speaker output level.
MODE
repeatedly until “3D ACTION” or
“3D THEATER” appears on the
display.
The 3D-PHONIC, DSP, and Ÿ PRO LOGIC indicators also
light up on the display.
3. Adjust the effect level.
ADJUST
1) Press ADJUST repeatedly until “DSP
SOUND
EFFECT” appears on the display.
• Once you have pressed ADJUST,
MULTI CURSOR % / fi can be also
used for selecting “DSP EFFECT.”
• The display changes to show the
current setting.
2. Press SOUND.
The 10 keys are activated for sound adjustments.
EFFECT
3. Press EFFECT to select an effect
level you want.
• Each time you press the button, the effect
level changes as follows:
9
MULTI CURSOR
2) Press MULTI CURSOR @ / # to
select the effect level.
• As you press it, the effect level
changes as follows:
DSP EFFECT 1
DSP EFFECT 2
DSP EFFECT 3
DSP EFFECT 5
DSP EFFECT 4
DSP EFFECT 1
DSP EFFECT 2
DSP EFFECT 3
As the number increases, the selected 3D-PHONIC mode
becomes stronger.
DSP EFFECT 5
DSP EFFECT 4
As the number increases, the selected DAP mode becomes
stronger.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Fr om t he r em ot e cont r ol:
Adjus t ing t he S ur r ound M odes
SURROUND
MODE
1. Press SURROUND MODE
repeatedly until the DAP mode —
LIVE CLUB, DANCE CLUB,
HALL, or PAVILION — or HEAD
Once you have adjusted the Surround modes, the adjustment is
memorized for each Surround mode.
Dolby a nd DTS S ur r ound a djus t m ent s
PHONE appears on the display.
The DSP indicator also lights up on the
display. (When the HEAD PHONE is
selected, HEAD PHONE indicator lights up,
instead of the DSP indicator.)
• When you have set “REAR SPK” to “NONE,” the 3D-
PHONIC indicator also lights up. (Except for “HEAD
PHONE.”)
Before you start, remember...
• Make sure that you have set the speaker information correctly
(see page 12).
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
• You cannot adjust the rear speaker output levels when you have set
“REAR SPK” to “NONE.” See page 12.
• You cannot adjust the center speaker output level when you have
set “CENTER SPK” to “NONE.” See page 12.
SOUND
2. Press SOUND.
The 10 keys are activated for sound
adjustments.
Fr om t he r em ot e cont r ol:
1. Press SURROUND to activate an
SURROUND
appropriate Surround mode —
PRO LOGIC, DOLBY DIGITAL
REAR•L
3. Adjust the rear speaker output
5
6
or DTS SURROUND.
levels.
• Each time you press the button, the Surround mode turns on
• To adjust the left rear speaker level, press
REAR•L –/+ (from –10 dB to +10 dB).
• To adjust the right rear speaker level, press
REAR•R –/+ (from –10 dB to +10 dB).
MENU
ENTER
and off alternately.
• When “PRO LOGIC” is selected, the Ÿ PRO LOGIC
indicator lights up on the display.
REAR•R
7/P
8
Note:
You can also press SURROUND MODE to activate an appropriate
Surround mode — PRO LOGIC, DOLBY DIGITAL, or DTS.
EFFECT
4. Press EFFECT to select an effect
9
level you want.
• Each time you press the button, the effect
2. Press SOUND.
SOUND
The 10 keys are activated for sound adjustments.
level changes as follows:
3. Press TEST to check the speaker
DSP EFFECT 1
DSP EFFECT 2
DSP EFFECT 3
output balance.
TEST
DSP EFFECT 5
DSP EFFECT 4
“TEST TONE L” starts flashing on the
display, and a test tone comes out of the
speakers in the following order:
0
As the number increases, the selected DAP mode becomes
stronger.
TEST TONE R
TEST TONE L TEST TONE C
(Right front speaker)
(Left front speaker)
(Center speaker)
TEST TONE LS
TEST TONE RS
(Left rear speaker)
(Right rear speaker)
Notes:
• You can adjust the speaker output levels without outputting the
test tone.
• No test tone comes out of the center speaker when “CENTER
SPK” is set to “NONE” (see page 12).
• No test tone comes out of the rear speakers when “REAR SPK”
is set to “NONE” (see page 12).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CNTR
J VC Thea t er S ur r ound a djus t m ent s
4. Adjust the speaker output levels.
• To adjust the center speaker level, press
CNTR –/+ (from –10 dB to +10 dB).
Before you start, remember...
• Make sure that you have set the speaker information correctly
(see page 12).
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
• You cannot adjust the rear speaker output levels when you have set
“REAR SPK” to “NONE.” See page 12.
3
5
4
• To adjust the left rear speaker level, press
REAR•L –/+ (from –10 dB to +10 dB).
• To adjust the right rear speaker level, press
REAR•R –/+ (from –10 dB to +10 dB).
REAR•L
6
• You cannot adjust the center speaker output level and center tone
when you have set “CENTER SPK” to “NONE.” See page 12.
MENU
ENTER
REAR•R
Fr om t he r em ot e cont r ol:
7/P
8
SURROUND
MODE
1. Press SURROUND MODE
repeatedly until “THEATER”
appears on the display.
• The Ÿ PRO LOGIC and DSP indicators
also light up on the display.
TEST
5. Press TEST again to stop the test
tone.
0
On t he fr ont pa nel:
SOUND
2. Press SOUND.
You can also use the buttons on the front panel to adjust the
The 10 keys are activated for sound adjustments.
Surround modes. However, no test tone is available when using the
buttons on the front panel. So, make adjustments while listening to
the sound of the source played back.
3. Press TEST to check the speaker
TEST
output balance.
“TEST TONE L” starts flashing on the
display, and a test tone comes out of the
speakers in the following order:
0
SURROUND
1. Press SURROUND to activete an
appropriate Surround mode —
PRO LOGIC, DOLBY DIGITAL
or DTS SURROUND.
TEST TONE R
TEST TONE L TEST TONE C
(Right front speaker)
(Left front speaker)
(Center speaker)
• Each time you press the button, the Surround mode turns on
and off alternately.
• When “PRO LOGIC” is selected, the Ÿ PRO LOGIC
indicator lights up on the display.
TEST TONE LS
TEST TONE RS
(Left rear speaker)
(Right rear speaker)
Notes:
• You can adjust the speaker output levels without outputting the
test tone.
• No test tone comes out of the center speaker when “CENTER
SPK” is set to “NONE” (see page 12).
• No test tone comes out of the rear speakers when “REAR SPK”
is set to “NONE” (see page 12).
2. Adjust the speaker output levels.
ADJUST
1) Press ADJUST repeatedly until one of
the following indications appears on
the display.
“CENTER LEVEL”:
To adjust the center speaker level.
“REAR L LEVEL”:
To adjust the left rear speaker level.
“REAR R LEVEL”:
To adjust the right rear speaker level.
• Once you have pressed ADJUST,
MULTI CURSOR % / fi can be also
used for selecting the speaker.
MULTI CURSOR
2) Press MULTI CURSOR @ / # to
adjust the selected speaker output level
(from –10 dB to +10 dB).
3) Repeat 1) and 2) to adjust the other
speaker output levels.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
On t he fr ont pa nel:
4. Adjust the speaker output levels.
• To adjust the center speaker level, press
CNTR –/+ (from –10 dB to +10 dB).
CNTR
You can also use the buttons on the front panel to adjust the
Surround modes. However, no test tone is available when using the
buttons on the front panel. So, make adjustments while listening to
the sound of the source played back.
3
5
4
• To adjust the left rear speaker level, press
REAR•L –/+ (from –10 dB to +10 dB).
• To adjust the right rear speaker level, press
REAR•R –/+ (from –10 dB to +10 dB).
REAR•L
DSP MODE
1. Press DSP MODE repeatedly until
6
“THEATER” appears on the
display.
MENU
ENTER
• The Ÿ PRO LOGIC and DSP indicators
also light up on the display.
REAR•R
7/P
8
ADJUST
2. Adjust the speaker output levels.
1) Press ADJUST repeatedly until one of
the following indications appears on
the display.
TEST
“CENTER LEVEL”:
5. Press TEST again to stop the test tone.
6. Press EFFECT to select an effect
To adjust the center speaker level.
“REAR L LEVEL”:
To adjust the left rear speaker level.
“REAR R LEVEL”:
0
EFFECT
To adjust the right rear speaker level.
• Once you have pressed ADJUST,
MULTI CURSOR % / fi can be also
level you want.
• Each time you press the button, the effect
level changes as follows:
9
used for selecting the speaker.
MULTI CURSOR
2) Press MULTI CURSOR @ / # to
adjust the selected speaker output
level (from –10 dB to +10 dB).
3) Repeat 1) and 2) to adjust the other
speaker output levels.
DSP EFFECT 1
DSP EFFECT 2
DSP EFFECT 3
DSP EFFECT 5
DSP EFFECT 4
As the number increases, JVC Theater Surround becomes
stronger.
ADJUST
3. Adjust the effect level.
1) Press ADJUST repeatedly until “DSP
EFFECT” appears on the display.
• Once you have pressed ADJUST,
MULTI CURSOR % / fi also can be
used for selecting “DSP EFFECT.”
• The display changes to show the
current setting.
MULTI CURSOR
2) Press MULTI CURSOR @ / # to
select the effect level.
• As you press it, the effect level changes
as follows:
DSP EFFECT 1
DSP EFFECT 2
DSP EFFECT 3
DSP EFFECT 5
DSP EFFECT 4
As the number increases, JVC Theater Surround becomes
stronger.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
For t he ot her DS P m odes
On t he fr ont pa nel:
Act iva t ing t he DS P M odes
You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.
DSP MODE
1. Press DSP MODE repeatedly until
the mode you want appears on the
For Dolby P r o Logic, Dolby Digit a l, a nd DTS
Digit a l S ur r ound
display.
• Each time you press the button, the DSP
modes change. (See page 20 for more
details.)
On t he fr ont pa nel:
SURROUND
1. Press SURROUND so that the
lamp next to the button lights up.
• Each time you press the button, the Dolby/
DTS Surround mode turns on and off
alternately.
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software encoded with Dolby Surround and labeled with
DOLBY SURROUND
mark.
2. Select and play a sound source.
To ca ncel t he DS P m ode
DSP MODE
• To enjoy Dolby Pro Logic, play back a software encoded with
Press DSP MODE repeatedly until “DSP OFF”
appears on the display.
DOLBY SURROUND
Dolby Surround and labeled with
mark.
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with mark.
D
I
G
I
T
A
L
• To enjoy DTS Digital surround, play back a software encoded
with DTS Digital Surround and labeled with mark.
Fr om t he r em ot e cont r ol:
SURROUND
MODE
1. Press SURROUND MODE
repeatedly until the DSP mode you
To ca ncel t he Dolby/ DTS S ur r ound m ode
want appears on the display.
• Each time you press the button, the DSP
modes change. (See page 20 for more
details.)
SURROUND
Press SURROUND again so that the lamp goes
off. (“SURROUND OFF” appears on the
display.)
2. Select and play a sound source.
Fr om t he r em ot e cont r ol:
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software encoded with Dolby Surround and labeled with
SURROUND
1. Press SURROUND so that the
lamp on the front panel lights up.
• Each time you press the button, the Dolby/
DTS Surround mode turns on and off
alternately.
• You can also turn on Dolby/DTS Surround
mode by pressing SURROUND MODE.
(See page 22 for more details.)
DOLBY SURROUND
mark.
SURROUND
MODE
To ca ncel t he DS P m ode
Press SURROUND MODE repeatedly until
“DSP OFF” appears on the display.
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
DOLBY SURROUND
Dolby Surround and labeled with
mark.
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with mark.
D
I
G
I
T
A
L
• To enjoy DTS Digital surround, play back a software encoded
with DTS Digital Surround and labeled with mark.
To ca ncel t he Dolby/ DTS S ur r ound m ode
SURROUND
Press SURROUND again. (“SURROUND OFF”
appears on the display.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
COM P U LINK Rem ot e Cont r ol S ys t em
The COMPU LINK remote control system allows you to operate J VC audio components through the remote sensor on
the receiver.
To use this remote control system, you need to connect JVC audio
components through the COMPU LINK-3 (SYNCHRO) jacks (see
below) in addition to the connections using cables with RCA pin
plugs (see page 5).
• Make sure that the AC power cords of these components are
unplugged before connection. Plug the AC power cords only after
all connections are complete.
Aut om a t ic P ower On/ Off (S t a ndby): only pos s ible
wit h t he COM P U LINK-3 connect ion
Both the CD player and cassette deck (or MD recorder) turn on and
off (standby) along with the receiver.
When you turn on the receiver, the CD player or cassette deck (or
MD recorder) will turn on automatically, depending on which
component has been previously selected.
When you turn off the receiver, both the CD player and cassette
deck (or MD recorder) will turn off (standby).
CD player
S ynchr onized Recor ding
Synchronized recording means the cassette deck (or MD recorder)
starts recording as soon as a CD or a record begins playing.
Cassette deck
or
MD recorder
To use synchronized recording, follow these steps:
COMPU LINK – 3
(SYNCHRO)
1. Put a tape in the cassette deck (or an MD in the
MD recorder), and a disc in the CD player (or a
record on the turntable).
2. Press the record (¶) button and the pause (8)
button on the cassette deck (or MD recorder) at
the same time.
This puts the cassette deck (or MD recorder) into recording
pause.
Turntable
If you do not press the record (¶) button and pause (8) button at
the same time, the synchronized recording feature will not
operate.
Notes:
• If your audio component has two COMPU LINK-3 (SYNCHRO)
jacks, you can use either one. If it has only one COMPU LINK-3
(SYNCHRO) jack, connect it so that it is the last item in the series
of components. (For example, the turntable or CD player in the
diagram above.)
• To operate the cassette deck or MD recorder using the COMPU
LINK remote control system, set the source name correctly. (See
page 11.)
3. Press the play (3) button on the CD player or on
the turntable.
The source changes on the receiver, and as soon as play starts,
the cassette deck (or MD recorder) starts recording. When the
play ends, the cassette deck (or MD recorder) enters recording
pause, and stops about 4 seconds later.
• Refer also to the manuals supplied with your audio components.
Notes:
This remote control system allows you to use four functions listed
below.
• During synchronized recording, the selected source cannot be
changed.
• If the power of any component is shut off during synchronized
recording, the COMPU LINK remote control system may not
operate properly. In this case, you must start again from the
beginning.
Rem ot e Cont r ol t hr ough t he Rem ot e S ens or on t he
Receiver
You can control the connected audio components through the remote
sensor on the receiver using this remote control. Aim the remote
control directly at the remote sensor on the receiver. For details, see
pages 29 and 30.
Aut om a t ic S our ce S elect ion
When you press the play (3) button on a connected component or
on its own remote control, the receiver automatically turns on and
changes the source to the component. On the other hand, if you
select a new source on the receiver or on the remote control, the
selected component begins playing immediately.
In both cases, the previously selected source continues playing
without sound for a few seconds.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COM P U LINK Rem ot e Cont r ol S ys t em
The AV COMPU LINK remote control system allows you to operate J VC video components (TV, VCR, and DVD player)
through the receiver.
To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the
procedure on the next page.
CONNECTIONS 1 :
CAUTION
TV
The AV COMPU LINK remote
control system cannot control the
DBS tuner connected to the TV
SOUND/DBS jacks.
VCR
DVD player
VHS
DVD
AV
If the AV COMPU LINK terminal
on the TV is “RECEIVER/AMP”
COMPU LINK
AV
COMPU LINK
AV
COMPU LINK
AV
COMPU LINK
RECEIVER/AMP
RECEIVER/
AMP
EX
(VCR)
Notes:
• When connecting only the
VCR or DVD player to this
receiver, connect it directly to
the receiver using cable with
the monaural mini-plugs.
• Refer also to the manuals
supplied with your video
components.
IMPORTANT:
If the AV COMPU LINK terminal
on the TV is “AV COMPU LINK
EX”
Connect to the terminal indicated in the
illustration.
DO NOT connect to the TV terminal.
AV
COMPU LINK EX
CONNECTIONS 2 :
CASE1: If the DVD player is equipped with the S-video terminals
DO NOT use this video terminal.
VIDEO
DVD
DVD player
DVD
DBS
OUT
(REC)
TV
VCR
IN
(PLAY)
To Video input 1
To Video input 2
VCR
MONITOR
OUT
S-VHS
VIDEO
S-VIDEO
CASE2: If the DVD player is not equipped with the S-video terminals
DO NOT use this video terminal.
VIDEO
DVD player
DVD
DVD
DBS
TV
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
VCR
S-VHS
VIDEO
S-VIDEO
To Video input 2
27
Download from Www.Somanuals.com. All Manuals Search And Download.
1. If you have already plugged your VCR, DVD
player, TV, and this receiver into the AC outlets,
unplug their AC power cords first.
One-Touch DVD P la y
Simply by starting playback on the DVD player, you can enjoy the
DVD playback without setting other switches manually.
• When the DVD player is connected through the analog input jacks
on this receiver (and analog input is selected), the receiver
automatically turns on and changes the source to “DVD.”
• When the DVD player is connected through the digital input
terminal on this receiver (and digital input is selected), the
receiver automatically turns on and changes the source to “DVD
DIGITAL.”
2. Connect your VCR, DVD player, TV, and this
receiver, using the cables with the monaural mini-
plugs (not supplied).
• See “CONNECTIONS 1” on the previous page.
3. Connect the audio input/output jacks on VCR,
DVD player, TV, and this receiver using the
cables with RCA pin plug
The TV automatically turns on and changes the input mode to the
position so that you can view the playback picture.
• See pages 5 and 6.
Aut om a t ic S elect ion of TV’s Input M ode
• When you select “TV SOUND” as the source to play on the
receiver, the TV automatically changes the input mode to the TV
tuner so that you can watch TV.
• When you select “DVD” (or “DVD DIGITAL”), “VCR,” or
“DBS” (or “DBS DIGITAL”) as the source to play on the receiver,
the TV automatically changes the input mode to the appropriate
position (either Video Input 1 or Video Input 2) so that you can
view the playback picture.
4. Connect the video input/output jacks on VCR,
DVD player, TV, and this receiver, using the
cables with RCA pin plug or with
S-video plug.
• See “CONNECTIONS 2” on the previous page.
5. Plug the AC power cords of the components into
the AC outlets.
Aut om a t ic P ower On/ Off
6. When turning on the TV for the first time after
the AV COMPU LINK connection, turn the TV
volume to the minimum using the TV volume
control on the TV.
The TV, VCR, and DVD player turn on and off along with the
receiver.
When you turn on the receiver;
• If the previously selected source is “VCR,” the TV and VCR will
turn on automatically.
• If the previously selected source is “TV SOUND” or “DBS” (or
“DBS DIGITAL”), only the TV will turn on automatically.
• If the previously selected source is “DVD” (or “DVD DIGITAL”),
the TV and DVD player will turn on automatically.
When you turn off the receiver, the TV, VCR and the DVD player
will turn off.
7. Turn on the other connected components first,
then turn on this receiver.
• When turning on the VCR, use the remote control supplied
with this receiver (press VCR POWER).
The AV COMPU LINK remote control system allows you to use the
five basic functions listed below.
Note:
Rem ot e Cont r ol of t he TV, DVD pla yer, a nd VCR
Us ing This Rem ot e Cont r ol
If you turn off the receiver while recording on the VCR, the VCR will
not turn off, but continue recording.
See page 30 for details.
For the DVD player and the VCR:
• Aim the remote control directly at the remote sensor on each
component.
For the TV having AV COMPU LINK terminal “RECEIVER/
AMP”:
• Aim the remote control directly at the remote sensor on the
receiver.
For the TV having AV COMPU LINK terminal “AV COMPU
LINK EX”:
• Aim the remote control directly at the remote sensor on the TV.
One-Touch Video P la y
Simply by inserting a video cassette without its safety tab into the
VCR, you can enjoy the video playback without setting other
switches manually. The receiver automatically turns on and changes
the source to “VCR.”
The TV automatically turns on and changes the input mode to the
position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play
(3) button on the VCR or on the remote control. So, you can get the
same result.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Oper a t ing J VC’s Audio/ Video Com ponent s
You can operate J VC’s audio and video components with this receiver’s remote control, since control signals for J VC
components are preset in the remote control.
S ound cont r ol s ect ion (Am plifier )
IMPORTANT:
You can always perform the following operations:
To operate JVC’s audio components using this remote control:
• You need to connect JVC audio components through the COMPU
LINK-3 (SYNCHRO) jacks (see page 26) in addition to the
connections using cables with RCA pin plugs (see page 5).
• Aim the remote control directly at the remote sensor on the receiver.
• If you use the buttons on the front panel to choose a source, the
remote control will not operate that source. To operate a source with
the remote control, the source must be selected using source
selecting buttons on the remote control.
SURROUND:
Turns on or off the Surround modes —
Dolby Pro Logic, Dolby Digital, and DTS
Digital Surround.
SURROUND MODE: Selects the DSP modes.
After pressing SOUND, you can perform the following operations:
• To operate the cassette deck or MD recorder using the COMPU
LINK remote control system, set the source name correctly. (See
page 11.)
SUBWOOFER –/+: Adjusts the subwoofer output level.
CNTR –/+:
REAR•L –/+:
REAR•R –/+:
EFFECT:
Adjusts the center speaker output level.
Adjusts the left rear speaker output level.
Adjusts the right rear speaker output level.
Selects the effect level.
• Refer also to the manuals supplied with your components.
TEST:
Turns on or off the test tone output.
Note:
POWER
After adjusting sounds, press the corresponding source selecting
button or CD-DISC to operate your target source by using the 10
keys; otherwise, the 10 keys cannot be used for operating your target
source.
VCR
CATV/ SAT
TV
AUDIO
SLEEP
PHONO
FM/AM
DVD TV SOUND/ DBS VCR
ANALOG/DIGITAL
CD
Tur nt a ble
TAPE/MD
After pressing PHONO, you can perform the following operations
on a turntable:
3
8
3:
7:
Starts playing.
Stops operations.
CATV
CONTROL
REC PAUSE
SURROUND
7
SOUND
SURROUND
MODE
VCR CH
CATV CH
CD - DISC
CD pla yer
After pressing CD, you can perform the following operations on the
CD player:
SUBWOOFER
CNTR
1
2
3
4
REAR•R
REAR•L
3:
Starts playing.
Returns to the beginning of the current (or
previous) track.
Skips to the beginning of the next track.
Stops playing.
Pauses playing. To release it, press 3.
Selects a track number directly.
For track number 5, press 5.
7/P
8
ENTER
5
EFFECT
6
TEST
0
4:
MENU
+10
100+
9
10
RETURN
¢:
TV/ VIDEO
7:
TV CH
TV VOL VOLUME
MUTING
8:
1 – 10, +10:
RM-SRX6500J REMOTE CONTROL
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Tuner
After pressing FM/AM, you can perform the following operations:
FM/AM:
Alternates between FM and AM.
1 – 10, +10:
Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT:
CD pla yer -cha nger
To operate JVC’s video components using this remote control:
• You need to connect JVC video components through the AV
COMPU LINK terminals (see page 27) in addition to the connections
using cables with RCA pin plugs (see page 6).
• Some JVC VCRs can accept two types of the control signals —
remote code “A” and “B.” Before using this remote control, make
sure that the remote control code of the VCR connected to the VCR
jacks is set to code “A.”
After pressing CD-DISC, you can perform the following operations
on a CD player-changer:
3:
4:
Starts playing.
Returns to the beginning of the current (or previous)
track.
¢:
Skips to the beginning of the next track.
Stops playing.
Pauses playing. To release it, press 3.
Selects the number of a disc installed in a CD
player-changer.
7:
• When using the remote control:
8:
–For the DVD player and VCR operations, aim the remote control
directly at the remote sensor on each component, not on the
receiver.
1 – 6, 7/P:
–For the TV operations:
After pressing CD, you can perform the following operations on the
CD player-changer:
7 If the TV has the AV COMPU LINK terminal “RECEIVER/AMP,”
aim the remote control directly at the remote sensor on the
receiver.
7 If the TV has the AV COMPU LINK terminal “AV COMPU LINK
EX,” aim the remote control directly at the remote sensor on the
TV.
1 – 10, +10:
Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
VCR
You can always perform the following operations:
you can do the following operations using the number buttons after
pressing CD.
VCR POWER: Turns on or off the VCR.
1. Select a disc number.
2. Then select a track number (always enter two digits).
3. Start playback.
After pressing VCR, you can perform the following operations on
the VCR:
1 – 9, 0:
3:
Selects the TV channels on VCR.
Starts playing.
Rewinds a tape.
Fast winds a tape.
Stops operations.
EXAMPLES:
• Selecting disc number 3, track number 2, and start playback.
Press 3, then, 0, 2, then 3.
1:
¡:
7:
• Selecting disc number 10, track number 5, and start playback.
Press 1, 10, then, 0, 5, then 3.
8:
Pauses playing. To release it, press 3.
REC PAUSE: Pauses recording temporarily. To release it press 3.
VCR CH +/–: Changes the TV channels on the VCR.
• Selecting disc number 105, track number 12, and start playback.
Press 1, 10, 5, then 1, 2 then 3.
DVD pla yer
Ca s s et t e deck
After pressing DVD, you can perform the following operations on a
DVD player:
After pressing TAPE/MD, you can perform the following operations
on a cassette deck:
3:
Starts playing.
Returns to the beginning of the current (or
previous) track.
Skips to the beginning of the next track.
Stops playing.
Stops playing temporarily. To release it, press 3.
3:
Starts playing.
4:
1:
¡:
7:
Fast winds the tape from right to left.
Fast winds the tape from left to right.
Stops operations.
Pauses playing. To release it, press 3.
¢:
7:
8:
8:
REC PAUSE: Pauses recording temporarily. To release it press 3.
Note:
After pressing DVD, these buttons
can be used for the DVD menu
operations.
Before starting the above operations, make sure that you have
changed the source name correctly. See page 11.
3
REAR•R
Note:
7/P
8
ENTER
+10
6
M D r ecor der
MENU
For detailed menu operations, refer to the
instructions supplied with the discs or the
DVD player.
After pressing TAPE/MD, you can perform the following operations
on the MD recorder:
10
3:
4:
Starts playing.
Returns to the beginning of the current (or previous)
track.
TV
¢:
7:
Skips to the beginning of the next track.
Stops playing.
Pauses playing. To release it, press 3.
You can always perform the following operations:
TV POWER: Turns on or off the TV.
8:
TV/VIDEO:
Sets the input mode (either TV or VIDEO).
REC PAUSE: Pauses recording temporarily. To release it press 3.
TV VOL +/–: Adjusts the volume.
TV CH +/–:
RETURN:
Changes the channels.
Alternates between the previously selected channel
and the current channel.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 11.
1 – 9, 0, 100+: Selects the channels.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Other Manufacturers’ Video Equipment
To cha nge t he t r a ns m it t a ble s igna ls for
oper a t ing a not her m a nufa ct ur er ’s TV
This remote control supplied with the receiver can transmit control
signals for other manufacturers’VCRs, TVs, CATV converters and
satellite tuners. By changing the transmittable signals from preset
ones to the other manufacturers’, you can operate the other
manufacturer’s components using this remote control.
1. Press and hold TV POWER.
2. Press TV SOUND/DBS.
When operating the other manufacturers’ components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer’s code
each for VCR, TV, CATV converters, and satellite tuner.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 0, then 1.
For a Toshiba product, press 0, then 8.
4. Release TV POWER.
The following buttons can be used for operating the TV:
POWER
TV POWER: Turns on and off the TV.
VCR
CATV/ SAT
TV
AUDIO
SLEEP
PHONO
FM/AM
TV VOL +/–:
TV/VIDEO:
Adjusts the volume.
Sets the input mode (either TV
or VIDEO).
DVD TV SOUND/ DBS VCR
ANALOG/DIGITAL
CD
After pressing TV SOUND/DBS, you can perform the
following operations on the TV:
TAPE/MD
3
8
TV CH +/–:
1 – 9, 0, 100+ (+10): Selects the TV channels.
100+ (+10) button will function as
Changes the channels.
CATV
CONTROL
REC PAUSE
SURROUND
7
SOUND
the ENTER button if your TV requires
pressing ENTER after selecting a
channel number.
Alternates between the previously
selected channel and the current channel.
SURROUND
MODE
VCR CH
CATV CH
CD - DISC
SUBWOOFER
CNTR
RETURN:
1
2
3
4
REAR•R
REAR•L
7/P
8
ENTER
5
EFFECT
6
TEST
0
Note:
MENU
+10
100+
9
10
RETURN
Refer to the manual supplied with your TV.
TV/ VIDEO
5. Try to operate your TV by pressing TV POWER.
When your TV turns on or off, you have entered the correct
code.
TV CH
TV VOL VOLUME
MUTING
RM-SRX6500J REMOTE CONTROL
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Manufacturer
Code
Manufacturer
Code
Hitachi
10
01
Samsung
Sanyo
Sony
12
13
07
06
08
09
JVC
Magnavox
Mitsubishi
Panasonic
RCA
02
03
Sharp
04, 11
05
Toshiba
Zenith
Manufacturers’ codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To cha nge t he t r a ns m it t a ble s igna ls for
oper a t ing a not her m a nufa ct ur er ’s VCR
To cha nge t he t r a ns m it t a ble s igna ls for
oper a t ing a CATV conver t er or s a t ellit e t uner
1. Press and hold CATV/SAT POWER.
2. Press CATV CONTROL.
1. Press and hold VCR POWER.
2. Press VCR.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
See the list below to find the code.
Examples: For a JVC product, press 1, then 4.
For a SONY product, press 2, then 0.
Examples: For a PANASONIC product, press 0, then 7.
For a MITSUBISHI product, press 1, then 3.
4. Release CATV/SAT POWER.
Following button can be used for operating the CATV converter
or the satellite tuner:
4. Release VCR POWER.
Following button can be used for operating the VCR:
VCR POWER: Turns on and off the VCR.
CATV/SAT POWER: Turns on and off the CATV converter
or satellite tuner.
After pressing VCR, you can perform the
following operations on the VCR:
VCR CH +/–: Changes the TV channels on the VCR.
After pressing CATV CONTROL, you can perform the
following operations on the equipment:
3:
Starts playback.
CATV CH +/–:
1 – 9, 0, 100+ (+10): Selects the channel.
100+ (+10) button will function as the
Changes the channels.
1:
¡:
7:
Rewinds a video tape.
Fast winds a video tape.
Stops operation.
Pauses. To resume playing, press 3.
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
8:
REC PAUSE: Pauses recording temporarily.
RETURN:
Alternates between previously selected
channel and the current channel.
Note:
Refer to the manual supplied with your VCR.
Note:
Refer to the manual supplied with your CATV converter or satellite
tuner.
5. Try to operate your VCR by pressing VCR
POWER.
When your VCR turns on or off, you have entered the correct
code.
5. Try to operate your CATV converter or satellite
tuner by pressing CATV/SAT POWER.
When your CATV converter or satellite tuner turns on or off,
you have entered the correct code.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
If there are more than one code listed for your brand of
CATV converter or satellite tuner, try each one until the
correct one is entered.
Manufacturer
Codes
Manufacturer
Codes
09
Emerson
Fisher
11
29
Philips
RCA
05, 06
24
Manufacturer
Codes
15, 16, 17, 18 RCA
01, 02, 03, 04, Scientific Atranta 09, 10
Manufacturer
Codes
Funai
10, 14, 15, 16
Samsung
Sanyo
Sharp
Hamlin
Jerrold
19
GoldStar
Hitachi
12
21, 22, 23
27, 28
30
04
05, 06, 07, 08 Sony
13, 14 Zenith
20
JVC
01, 02, 03
13
Shinton
Sony
Pioneer
11, 12
Mitsubishi
NEC
18, 19, 20
26
25
Toshiba
Zenith
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
Panasonic
07, 17
08
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Tr oubles hoot ing
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your J VC
service center.
PROBLEM
The display does not light up.
No sound from speakers.
POSSIBLE CAUSE
The power cord is not plugged in.
Speaker signal cables are not connected.
SOLUTION
Plug the power cord into an AC outlet.
Check speaker wiring and reconnect if
necessary.
The SPEAKERS 1 and 2 buttons are not
set correctly.
Press SPEAKERS 1 and 2 correctly.
An incorrect source is selected.
Muting is activated.
Select the correct source.
Press MUTING to cancel the mute.
Sound from one speaker only.
Speaker signal cables are not connected
properly.
Check speaker wiring and reconnect if
necessary.
The balance is set to one extreme.
Incoming signal is too weak.
Adjust the balance properly (see page 11).
Continuous hiss or buzzing during FM
reception.
Connect an outdoor FM antenna or contact
your dealer.
The station is too far away.
An incorrect antenna is used.
Select a new station.
Check with your dealer to be sure you have
the correct antenna.
Antennas are not connected properly.
Ignition noise from automobiles.
Check connections.
Occasional cracking noise during FM
reception.
Move the antenna farther from automobile
traffic.
Howling during record playing.
Your turntable is too close to speakers.
Move speakers away from the turntable.
“OVERLOAD” starts flashing on the
display.
Speakers are overloaded because of high
volume.
1. Press POWER on the front panel to turn off
the receiver.
2. Stop the playback source.
3. Turn on the receiver again, and adjust the
volume.
Speakers are overloaded because of short
circuit of speaker terminals.
Press POWER on the front panel to turn off
the receiver, check the speaker wiring, then
press it again to turn on the receiver again.
If “OVERLOAD” does not disappear though
speaker wiring is not short-circuited, consult
your dealer.
Remote control does not work.
There is an obstruction in front of the
remote sensor on the receiver.
Remove the obstruction.
Replace batteries.
Batteries are weak.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
S pecifica t ions
Am plifier
Output Power
At Stereo operation:
Front channels:
100 W per channel, min. RMS, driven into 8 Ω at
40 Hz to 20 kHz with no more than 0.8% total
harmonic distortion.
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel:
Rear channels:
100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):
PHONO (MM):
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
2.7 mV/47 k Ω
220 mV/47 k Ω
Audio Input (DIGITAL IN)* :
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD):
0.5 V (p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with
sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
TAPE/MD, VCR:
220 mV
Signal-to-Noise Ratio (’66 IHF/’78 IHF):
PHONO:
70 dB/78 dB (at REC OUT)
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
87 dB/80 dB
Frequency Response (8 Ω):
PHONO:
20 Hz to 20 kHz (±1 dB)
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization:
Bass Boost:
±1 dB (20 Hz to 20 kHz)
+3dB ±1 dB at 100 Hz
Tone Control:
Bass (100 Hz):
±10 dB ±2 dB
Treble (10 kHz):
±10 dB ±2 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
DBS, VCR, DVD:
DVD:
1 V (p-p)/75 Ω
1 V (p-p)/75 Ω
0.286 V (p-p)/75 Ω
S-video:
(Y: luminance):
(C: chrominance, burst):
Video Output Level:
Composite video:
S-video:
VCR, MONITOR OUT:
MONITOR OUT:
1 V (p-p)/75 Ω
1 V (p-p)/75 Ω
0.286 V (p-p)/75 Ω
(Y: luminance):
(C: chrominance, burst):
Synchronization:
Negative
45 dB
Signal-to-Noise Ratio:
34
Download from Www.Somanuals.com. All Manuals Search And Download.
FM t uner (IHF)
Tuning Range:
Usable Sensitivity:
87.5 MHz to 108.0 MHz
Monaural:
12.8 dBf (1.2 µV/75 Ω)
50 dB Quieting Sensitivity:
Monaural:
Stereo:
21.3 dBf (3.2 µV/75 Ω)
41.3 dBf (31.5 µV/75 Ω)
Signal-to-Noise Ratio (IHF-A weighted):
Total Harmonic Distortion:
Monaural:
Stereo:
78 dB at 85 dBf
73 dB at 85 dBf
Monaural:
Stereo:
0.4% at 1 kHz
0.6% at 1 kHz
Stereo Separation at REC OUT:
Alternate Channel Selectivity:
Frequency Response:
35 dB at 1 kHz
45 dB: (±400 kHz)
30 Hz to 15 kHz: (+0.5 dB, –3 dB)
AM t uner
Tuning Range:
Usable Sensitivity:
530 kHz to 1,710 kHz
Loop antenna
400 µV/m
Signal-to-Noise Ratio:
50 dB (100 mV/m)
Gener a l
Power Requirements:
Power Consumption:
AC 120V , 60 Hz
290 W/390 VA (at operation)
2 W (in standby mode)
Dimensions (W x H x D):
Mass:
435 mm x 146 mm x 403.5 mm
(17 3/16 in. x 5 3/4 in. x 15 15/16 in.)
10.2 kg (22.5 lbs)
Designs & specifications are subject to change without notice.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
0200HIMMDWJEIN
J
C
V
EN, FR
Download from Www.Somanuals.com. All Manuals Search And Download.
|