JVC DVR DR MV80B User Manual

RC305H-JM_BUSAJJK

DVD VIDEO RECORDER

DR-MV80B

For Customer Use :

Enter below the Model No. and

Serial No. which are located on the

rear of cabinet. Retain this

information for future reference.

Model No.

Serial No.

INSTRUCTIONS

LVT2013-001A

[J]

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC WARNING: This equipment may generate or

use radio frequency energy. Changes or modifica-

tions to this equipment may cause harmful interfer-

ence unless the modifications are expressly

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

approved in the instruction manual. The user could

lose the authority to operate this equipment if an

unauthorized change or modification is made.

That is, a single outlet circuit which powers only that

appliance and has no additional outlets or branch cir-

cuits. Check the specification page of this owner's

manual to be certain.

REGULATORY INFORMATION: FCC Part 15

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords,

frayed power cords, or damaged or cracked wire

insulation are dangerous. Any of these conditions

could result in electric shock or fire. Periodically

examine the cord of your appliance, and if its appear-

ance indicates damage or deterioration, unplug it, dis-

continue use of the appliance, and have the cord

replaced with an exact replacement part by an

authorized servicer.

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference when the product is operated in

a residential installation. This product generates,

uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the

instruction manual, may cause harmful interference

to radio communications. However, there is no guar-

antee that interference will not occur in a particular

installation. If this product does cause harmful inter-

ference to radio or television reception, which can

be determined by turning the product off and on, the

user is encouraged to try to correct the interference

by one or more of the following measures:

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the appliance.

To disconnect power from the mains, pull out the

mains cord plug. When installing the product, ensure

that the plug is easily accessible.

•

Reorient or relocate the receiving antenna.

Increase the separation between the product

and receiver.

•

Connect the product into an outlet on a circuit

different from that to which the receiver is con-

nected.

Consult the dealer or an experienced radio/TV

technician for help.

G-2

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

G-3

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

RECORDING

About DVD recording . . . . . . . . . . . . . . . . . .28

Notes for recording . . . . . . . . . . . . . . . . . . . .28

Recording time and picture quality . . . . . . .28

Basic Recording (One-Touch Recording) . . .29

Instant Timer Recording . . . . . . . . . . . . . . . .29

Simultaneous Play and Record . . . . . . . . . . .29

Timer-Link Recording

(External Timer Recording) . . . . . . . . . . . . . .30

Timer Recording . . . . . . . . . . . . . . . . . . . . . .31

Timer Recording Troubleshooting . . . . . . . .31

Dubbing from DVD to VCR . . . . . . . . . . . . . .32

Dubbing from VCR to DVD . . . . . . . . . . . . . .32

Recording from DV Input . . . . . . . . . . . . . . .33

About the

Symbol Display . . . . . . . . . . . . .2

Symbol Used in this Manual . . . . . . . . . . . . . .2

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .2

Moisture Condensation . . . . . . . . . . . . . . . . . .2

Recordable and Playable Discs . . . . . . . . . . .3

Recommended recordable DVD discs . . . . . .3

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .4

Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .4

Restrictions on video recording . . . . . . . . . . .5

What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . . . .5

Notice for Progressive Scan Use . . . . . . . . . .5

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Remote Control . . . . . . . . . . . . . . . . . . . . . . . .7

About the Remote Control . . . . . . . . . . . . . . .7

Remote Control Function . . . . . . . . . . . . . . . . .8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

EDITING

Title List and Chapter List Menu Overview .34

VR Mode: Original and Playlist Editing . . . .35

Adding Chapter Markers . . . . . . . . . . . . . . . .35

Changing the Title Thumbnails . . . . . . . . . . .35

Making a New Playlist . . . . . . . . . . . . . . . . . .36

Adding Additional Title/Chapters to the

HOOKUP AND SETTINGS

Connections to your TV . . . . . . . . . . . . . . . .10

HDMI connection . . . . . . . . . . . . . . . . . . . . . .11

Connection to an Amplifier . . . . . . . . . . . . . .12

Cable/Satellite box Connection to unit . . . . .13

Accessory Audio/Video (A/V)

Connections to Recorder . . . . . . . . . . . . . . .13

Connecting a Digital Camcorder . . . . . . . . . .13

Initial Setup Wizard . . . . . . . . . . . . . . . . . . . .14

Using the Home Menu . . . . . . . . . . . . . . . . . .14

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .15

General Settings . . . . . . . . . . . . . . . . . . . . . .15

Language Settings . . . . . . . . . . . . . . . . . . . .16

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . .16

Recording Settings . . . . . . . . . . . . . . . . . . . .17

Disc Settings . . . . . . . . . . . . . . . . . . . . . .17-18

General Explanation of On-Screen Display .19

Displaying Information While Watching AV

Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Deleting an Original or Playlist Title/

Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . .37

Naming a Title . . . . . . . . . . . . . . . . . . . . . . . .38

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .38

Moving a Playlist Chapter . . . . . . . . . . . . . . .39

Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . .39

Protect a Title . . . . . . . . . . . . . . . . . . . . . . . .39

Divide One Titles Into Two . . . . . . . . . . . . . .40

Combining Two Chapters Into One . . . . . . . .40

Overwriting Recording . . . . . . . . . . . . . . . . .41

Viewing Title List menu displayed on other

DVD Recorders or Players . . . . . . . . . . . . . .41

Playing Your Recordings on Other DVD

Players (Finalizing a Disc) . . . . . . . . . . . . . . .41

input source . . . . . . . . . . . . . . . . . . . . . . . . .19

Displaying Disc Information on-screen . . . . .19

REFERENCE

PLAYBACK

Language Code List . . . . . . . . . . . . . . . . . . .42

Troubleshooting . . . . . . . . . . . . . . . . . . . .43-45

Resetting the Recorder . . . . . . . . . . . . . . . .45

Specifications . . . . . . . . . . . . . . . . . . . . . .46-47

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Playing a Tape . . . . . . . . . . . . . . . . . . . . . . . .20

Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . .20

VCR Playback Options . . . . . . . . . . . . . . . . .20

DVD or Video CD Playback Features . . . .21-22

Special Playback Options . . . . . . . . . . . . . . .23

Playing a DivX Movie File . . . . . . . . . . . . . . .24

Playing an Audio CD or MP3/WMA files . . . .25

Viewing a JPEG files . . . . . . . . . . . . . . . .26-27

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

To ensure proper use of this product, please read

this owner’s manual carefully and retain for future

reference.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the

disc by the edges so that fingerprints do not get on

the surface. Never stick paper or tape on the disc.

About the Symbol Display

“

” may appear on your TV display during operation

and indicates that the function is not permitted by this

unit or specific media.

Symbol Used in this Manual

Note:

Indicates special notes and operating fea-

tures.

Storing Discs

After playing, store the disc in its case. Do not

expose the disc to direct sunlight or sources of heat

and never leave it in a parked car exposed to direct

sunlight.

Tip:

Indicates tips and hints for making the task

easier.

A section whose title has one of the following sym-

bols are applicable only to those discs represented

by the symbol.

Cleaning Discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing,

clean the disc with a clean cloth. Wipe the disc from

the center out.

DVD ALL All DVD discs listed below.

-RW

DVD-RW with VR recording mode

DVD-RW with Video recording mode

Video

-RW

RAM DVD-RAM disc

+RW DVD+RW disc

-R DVD-R disc

+R DVD+R disc

DVD DVD-Video disc

DivX DivX files

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

VCD Video CDs

ACD Audio CDs

MP3 MP3 files

WMA WMA files

JPEG JPEG files

Moisture Condensation

Never operate this product immediately after mov-

ing it from a cold location to a warm location. Leave

it for two or three hours without operating it. If you

use this product in such a situation, it may damage

discs/tapes and internal parts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recordable and Playable Discs

DVD-RW (DVD - ReWritable)

ꢀ DVD-RW discs can be formatted for VR mode recording or Video mode recording.

ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the

same Disc.

[VR mode]

ꢀ Recordings can be extensively edited

ꢀ Playable only on VR mode compatible players (after finalization)

[Video mode]

ꢀ Playable on regular DVD players (after finalization)

ꢀ Limited editing features

DVD-R (DVD - Recordable)

ꢀ These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.

ꢀ DVD-R discs can be only formatted to Video mode.

ꢀ Playable on regular DVD players (after finalization)

ꢀ Limited editing features

DVD-RAM (DVD - Random Access Memory)

ꢀ DVD-RAM discs can be formatted for VR mode recording.

ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the

same Disc.

ꢀ Playable on DVD-RAM compatible players.

ꢀ Recordings can be extensively edited.

ꢀ Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.

ꢀ You cannot use the cartridge-type DVD-RAM disc in this unit.

DVD+RW (DVD + ReWritable)

ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the

same Disc.

ꢀ Playable on DVD+RW compatible players (automatic finalization)

ꢀ The edited contents are playable on DVD+RW compatible players only after finalization.

ꢀ Recordings can be edited.

DVD+R (DVD + Recordable)

ꢀ These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any

more.

ꢀ Playable on DVD+R compatible players (after finalization)

ꢀ Any edited contents are not compatible on DVD+R compatible players. (Hide, chapter combine, added chapter

mark, etc.)

ꢀ Limited title/chapter editing features.

Recommended recordable DVD discs

DVD-R

DVD+R

Mitsubishi(8x,16x)

Verbatim(8x,16x)

JVC(8x,16x)

DVD-RW

Mitsubishi(4x)

Verbatim(4x)

JVC(6x,4x)

Maxell(4x)

DVD+RW

Mitsubishi(4x)

HP(4x)

DVD-RAM

Mitsubishi(3x)

Maxell(5x)

JVC(3x)

Mitsubishi(8x,16x)

Verbatim(8x,16x)

JVC(8x,16x)

Verbatim(4x)

Ricoh(4x)

Download from Www.Somanuals.com. All Manuals Search And Download.

Playable Discs

DVD (8 cm / 12 cm disc)

Discs such as movies that can be purchased or rented

Video CD (VCD) (8 cm / 12 cm disc)

VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format

Audio CD (8 cm / 12 cm disc)

Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased

CD-R/CD-RW (8 cm / 12 cm disc)

CD-R/CD-RW discs that contain audio titles, MP3, WMA or JPEG files.

Notes:

•

Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some

CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

•

Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.

Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW)

may not be playable.

•

DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder

may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s lens.

If you record a disc using a personal computer, even if it is recorded in a compatible format, there are

cases in which it may not play because of the settings of the application software used to create the disc.

(Check with the software publisher for more detailed information.)

•

This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different

types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain

pre-existing conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from

the Internet. Our company has no right to grant such permission. Permission should always be sought

from the copyright owner.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as

the rear of the unit or “ALL”.

Notes on Regional Codes

•

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number

must match your unit’s regional code or the disc cannot play.

•

If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code.

Can’t play back” appears on the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Restrictions on video recording

•

You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video

discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording

will pause or stop automatically and an error message will be displayed on-screen.

•

Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode or DVD-RAM disc

with CPRM (see below).

What is ‘CPRM’?

CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast

programs. CPRM stands for Content Protection for Recordable Media.

This Recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you

cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs format-

ted in VR mode or DVD-RAM discs. Both types of discs must be CPRM compatible. CPRM recordings can

only be played on players that are specifically compatible with CPRM. This unit does not support a DVD-R disc

with CPRM.

•

Recording equipment should be used only for lawful copying and you are advised to check carefully what is

lawful copying in the area in which you are making a copy. Copying of copyright material such as films or

music is unlawful unless permitted by a legal exception or consented to by the rights owner.

•

This product incorporates copyright protection technology that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended

for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation.

Reverse engineering or disassembly is prohibited.

Notice for Progressive Scan Use

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPAT-

IBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE

OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH

THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING

YOUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD+VCR RECORDER, PLEASE CONTACT OUR

CUSTOMER SERVICE CENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

f g h i j

m n

The DVD deck is selected.

Disc Tray (DVD deck)

Insert a disc here.

DVD

Lights when the Recorder is in playing mode

or flashes when search mode.

Z OPEN/CLOSE

Opens or closes the disc tray.

The VCR deck is selected.

VCR

Cassette Compartment (VCR deck)

Insert a video cassette here.

Indicates when the recorder is in timer

recording or a timer recording is

programmed.

This indicator will flash when the unit is set

to standby mode for Timer-Link recording.

Z EJECT

Ejects the tape in the VCR deck.

STANDBY/ON (1/`)

Switches the Recorder ON and OFF.

A VHS tape is inserted in the VCR deck.

N / X (PLAY / PAUSE)

Starts playback.

Pause playback or recording temporarily,

press again to exit pause mode.

The Recorder is recording.

REC

Indicates PM time. (AM is not displayed.)

Indicates total playing time,

elapsed time, remaining time

or current deck status

x (STOP)

Stops playback

(Playback, Pause, etc).

z (REC)

Starts recording. Press repeatedly to set the

recording time. Press z (REC) for more than 3

seconds to set the unit to standby mode for

Timer-Link recording.

Remote Sensor

Point the recorder Remote Control here.

DVD/VCR

Toggles control between the DVD deck and the

VCR deck.

m/M (BACKWARD / FORWARD)

DVD: Search backward or forward.

- VCR: Rewinds/Advances the tape during the STOP

mode, for fast reverse/ forward picture search.

OUTPUT STATUS

Sets the output resolution for HDMI and COM-

PONENT OUTPUT jacks.

- HDMI: 1080p, 1080i, 720p, 480p, 480i

- COMPONENT: 480p, 480i

DUBBING

Press to copy DVD to VCR (or VCR to DVD).

DVD B VCR

DVD b VCR

Lights when recorder is dubbing.

DV IN

Connect the DV output of a digital camcorder.

Display window

Shows the current status of the Recorder.

AV IN 2 (VIDEO /AUDIO (Left/Right))

Connect the audio/video output of an external

source (Audio system, TV/ Monitor, VCR,

Camcorder, etc.).

Lights when a disc is in the DVD deck.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

EJECT, OPEN/CLOSE (Z)

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

b B v V (left/right/up/down)

Selects menu options.

ENTER (ꢁ)

Confirms menu selections.

Skips 30 seconds forward during

playback.

AUX

Changes the input to use for recording

(AV1, AV2, or DV IN).

DISPLAY

Accesses On-Screen Display.

Displays information of current status.

RETURN (O)

Removes the menu.

0-9 numerical buttons

Selects numbered options in a menu.

ꢀ ꢀ ꢀ ꢀ ꢀ

JVC TV Control Buttons

- TV STANDBY/ON: Turns the TV

on or off.

- INPUT: Selects the TV’s source.

- CH +/–: Selects TV’s channel.

- VOL +/–: Adjusts TV’s volume.

AUDIO

Selects an audio language or an audio

channel.

SUBTITLE

Selects a subtitle language.

ZOOM

Enlarges DVD video image.

ꢀ ꢀ ꢀ ꢀ ꢀ

BACKWARD / FORWARD

ꢀ ꢀ ꢀ ꢀ ꢀ

CHAPTER

Inserts a chapter marker when playing/

recording.

(m/M)

- DVD: Search backward or forward.

- VCR: Rewinds/Advances the tape

during the STOP mode, for fast

reverse/forward picture search.

z REC

Starts recording. Press repeatedly to

set the recording time.

REC MODE

SKIP (. / >)

Selects the recording mode:

- DVD: XP, SP, LP or EP.

- VCR: SP or SLP.

Go to next chapter or track. Returns to

beginning of current chapter or track or

go to previous chapter or track.

TITLE

Displays the disc’s Title menu, if

available.

PAUSE/STEP (X)

Pause playback or recording

temporarily.

Press repeatedly for frame-by-frame

playback.

THUMBNAIL

Selects a thumbnail picture for the

current title for use in the Title List

menu.

PLAY (N)

Starts playback.

PLAY MODE

Selects play mode.

STOP (x)

Stops playback or recording.

MARKER

Marks any point during playback.

ꢀ ꢀ ꢀ ꢀ ꢀ

Displays Marker Search menu.

ꢀ ꢀ ꢀ ꢀ ꢀ

HOME

Accesses or removes the HOME

menu.

STANDBY/ON (1/`)

Turns Recorder ON and OFF.

DVD

Select the Recorder’s function mode to

DVD.

CLEAR

Removes a mark on the Marker

Search menu.

DUBBING

DISC MENU/LIST

Accesses menu on a DVD disc, Title

List or Playlist menu.

Press to copy DVD to VCR (or VCR to

DVD).

TRACKING (+ / -)

Adjusts manually the tape’s picture

onscreen.

VCR

Select the Recorder’s function mode to

VCR.

: Feature is not available.

Battery installation (See page 8)

Detach the battery cover on the rear of

About the Remote Control

Operation Range

Point the Remote Control at the Remote Sensor

and press the buttons.

the Remote Control, and insert two

(R03/AAA size) batteries with 3 and #

aligned correctly.

Distance: About 23 ft (7 m) from the front of the

Remote Sensor.

Do not mix old and new batteries and never

mix different types of batteries such as stan-

dard, alkaline, etc.

Angle:

About 30° in each direction of the front of

the Remote Sensor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note:

Remote Control Function

(Refer to page 7)

If you change the batteries of the Remote Control with

A, B or D code, the remote control code is set to C

automatically. In this case, you should reset the remote

control code described above.

Remote Control A/B/C/D Code Switching

The remote control is capable of controlling four JVC

video units independently. Each of the units can

respond to one of four codes (A, B, C or D). The

remote control is preset to send C code signals

because your unit is initially set to respond to C code

signals. You can easily modify your unit to respond to

A, B or D code signals.

B/``

STANDBY/ON (1/&)

Number 1-4

STOP (x)

ENTER (ꢁ)

1. Press STANDBY/ON (1/&) on the unit to turn off the

unit with no video tape inserted.

2. Press the number key “1” for A, “2” for B, “3” for C or

“4” for D while pressing ENTER (ꢁ) down on the

remote control.

3. Press N/`` on the unit for over 5 seconds while the

unit is turned off. The current code appears on the

display window.

4. Press STOP (x) on the remote control, the current

code on the display window changes to new code

and blinks for approximately 10 seconds.

5. The new code setup on unit and remote is done.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

f g

OPTICAL (DIGITAL AUDIO OUTPUT)

Connect to digital (optical) audio equipment.

COAXIAL (DIGITAL AUDIO OUTPUT)

Connect to digital (coaxial) audio equipment.

COMPONENT OUTPUT (Y PB PR)

Connect to a TV with Y PB PR inputs

S-VIDEO OUTPUT

Connect to a S-Video Input on TV.

INPUT 1 (VIDEO/AUDIO (Left/Right))

Connect the audio/video output of an external

source (Cable/Satellite box, Audio system,

TV/Monitor, VCR, Camcorder).

AUDIO OUTPUT (Left/Right)

Connect to a TV or other equipment with audio

inputs.

VIDEO/AUDIO OUTPUT (Left/Right)

Connect to a TV with video and audio inputs.

HDMI OUTPUT

HDMI output providing a high quality interface

for digital audio and video.

AC Power Cord

Plug into the power source.

Caution:

Do not touch the inner pins of the jacks on the rear panel.

Electrostatic discharge may cause permanent damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hookup and Settings

Depending on your TV and other equipment

there are various ways you can connect the

recorder. Please refer to the manuals of your

TV, VCR, Stereo System or other devices as

necessary for additional connection informa-

tion.

Component Video connection

If your television is a high-definition or “digital ready”

television, you may take advantage of the Recorder’s

progressive scan output for the highest video resolu-

tion possible.

Connect the COMPONENT OUTPUT jacks on the

Recorder to the corresponding in jacks on the TV

using an optional Y PB PR cable (C).

Notes:

•

Make sure the Recorder is connected directly to the TV

and tune the TV to the correct video input channel.

Notes:

•

Set the resolution to 480p using OUTPUT STATUS but-

ton on the front panel for progressive signal.

Do not connect the Recorder’s AUDIO OUTPUT jack to

the phono in jack (record deck) of your audio system.

Progressive Scan does not work with the Video or S-

Video connections.

Do not connect the Recorder via another VCR. The

DVD image could be distorted by the copy protection

system.

If your TV does not accept the Progressive Scan format,

the picture will appear scrambled.

•

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. Position the units

away from each other or turn off the unit after removing

the disc.

If the resolution is set to 720p, 1080i or 1080p, the

COMPONENT OUTPUT connections are not available.

Audio connection

Connect the Left and Right AUDIO OUTPUT jacks on

the Recorder to the audio left/right in jacks on the TV

using the supplied audio cables (A1 or A2).

Connections to your TV

Make one of the following connections, depending on

the capabilities of your TV.

Rear of TV

Video connection

COMPONENT/PROGRESSIVE SCAN

VIDEO INPUT

AUDIO INPUT

S-VIDEO

INPUT

Connect the VIDEO OUTPUT jack on the Recorder to

the video in jack on the TV using the video cable

supplied (V).

Note:

If you use this connection, set the TV’s source selector to

VIDEO.

Rear of Recorder

S-Video connection

Connect the S-VIDEO OUTPUT jack on the Recorder

to the S-Video in jack on the TV using the optional S-

Video cable (S).

Rear of TV

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI connection

If you have a HDMI TV or monitor, you can connect it

to this recorder using a HDMI cable.

HDMI compatible TV

HDMI

1. Connect the HDMI OUTPUT jack on the recorder

to the HDMI INPUT jack on a HDMI compatible TV

or monitor (H).

2. Set the TV’s source to HDMI (refer to TV’s

Owner’s manual).

Notes:

• This unit will only provide up converted SD resolutions

when a HD resolution has been selected for the HDMI

output.

HDMI has the capability to support standard, enhanced,

or high-definition video plus standard to multi-channel

surround-sound audio, HDMI features include uncom-

pressed digital video, a bandwidth of up to 5 gigabytes

per second, one connector (instead of several cables

and connectors), and communication between the AV

source and AV devices such as DTVs.

•

If your TV is NOT capable of handling 96 kHz sampling

frequency, set the [Sampling Freq.] option to [48 kHz] on

the setup menu (See page 16). When this choice is

made, this unit will automatically convert any 96 kHz sig-

nals to 48 kHz so your system can decode them.

If your TV is not equipped with Dolby Digital and MPEG

decoder, set the [Dolby Digital] and [MPEG] options to

[PCM] on the setup menu (See page 16).

•

• If your TV is not equipped with DTS decoder, set the

[DTS] options to [OFF] on the setup menu (See page

16). To enjoy DTS multi channel surround, you must

connect this recorder to a DTS compatible receiver via

one of this recorder’s digital audio outputs.

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI licensing LLC.

Additional Information for HDMI

•

The arrow on the cable connector body should face up

for correct alignment with the connector on the recorder.

•

When you connect a HDMI or DVI compatible

device make sure of the followings:

- Try switching off the HDMI/DVI device and this

recorder. Next, switch on the HDMI/DVI device

and leave it for around 30 seconds, then switch

on this recorder.

(Type A)

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720(1440)x480i, 720x480p, 1280x720p,

1920x1080i or 1920x1080p video input.

•

If there is noise or lines on the screen, please check

the HDMI cable.

Not all HDCP-compatible DVI devices will work with

this recorder.

•

Not all HDCP-compatible DVI devices will work

with this recorder.

- It’s impossible copy protected-DVD title’s play-

back in non-HDCP devices.

Tip:

When you use HDMI connection, you can change the

resolution (480i, 480p, 720p, 1080i or 1080p) for the HDMI

output using OUTPUT STATUS button on the front panel.

For best performance, directly connect the HDMI

output to an HDMI input on your TV. If connecting

to some device other than a TV or monitor, such

as a home theater receiver with an HDMI input,

check the following to make sure the HDMI signal

will be received correctly:

Caution:

ꢀChanging the resolution when the recorder is connect-

ed with HDMI connector may result in malfunctions. To

solve the problem, turn off the recorder and then turn

it on again.

ꢀIf your TV does not accept your resolution setting,

abnormal picture appears on the screen.

Please read TV’s owner’s manual then set the resolu-

tion that your TV can accept.

Check the operating instructions of the con-

nected device to make sure that the HDMI

input of the device complies with HDMI-HDCP

specifications.

About HDMI

Check that the HDMI setup menu of any non-

display device is set to “pass-through” so that

HDMI signals received are not changed in any

way (such as changing the video or audio for-

mat).

HDMI (High Definition Multimedia Interface) supports both

video and audio on a single digital connection for use with

DVD Players, Set-Top Boxes, and other AV devices.

HDMI was developed to provide the technologies of HDCP

(High Definition Contents Protection). HDCP is used to pro-

tect digital content transmitted and received.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to an Amplifier

Rear of Recorder

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Pro Logic II/Pro

Logic

Connect the Left and Right AUDIO OUTPUT jacks on

the Recorder to the audio left and right in jacks on

your amplifier, receiver, or stereo system using the

audio cables (A) supplied.

Connecting to an amplifier equipped with two chan-

nel digital stereo (PCM) or to an Audio/Video receiv-

er equipped with a multi-channel decoder (Dolby

Digital™, MPEG 2, or DTS)

1. Connect one of the Recorder’s DIGITAL AUDIO

OUTPUT jacks (OPTICAL O, COAXIAL X) to the

corresponding in jack on your amplifier. Use an

optional digital (OPTICAL O, COAXIAL X) audio

cable.

2. You will need to activate the Recorder ’s digital

output. (See [Audio Settings] on page 16).

Digital Multi-channel sound

OPTICAL

DIGITAL INPUT

COAXIAL

DIGITAL INPUT

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your Recorder (MPEG 2,

Dolby Digital and DTS). Check the receiver manual

and the logos on the front of the receiver.

AUDIO INPUT

Amplifier (Receiver)

Caution:

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol are

registered trademarks of Dolby Laboratories.

Due to the DTS Licensing agreement, the digital

output will be in DTS digital out when DTS audio

stream is selected.

Notes:

Manufactured under license under U.S. Patent #:

5,451,942 & other U.S. and worldwide patents

issued & pending. DTS and DTS Digital Out are

registered trademarks and the DTS logos and

Symbol are trademarks of DTS, Inc.

•

If the audio format of the digital output does not match the

capabilities of your receiver, the receiver will produce a

strong, distorted sound or no sound at all.

•

Six Channel Digital Surround Sound via digital connec-

tion can only be obtained if your receiver is equipped

with a Digital Multi-channel decoder.

•

To see the audio format of the current DVD in the on-

screen display, press AUDIO.

This Recorder does not perform internal (2 channel)

decoding of a DTS sound track. To enjoy DTS multi

channel surround, you must connect this Recorder to a

DTS compatible receiver via one of this Recorder’s digi-

tal audio outputs.

•

If the HDMI connection is used at the same time as the

Digital and Optical Digital Audio Output, these audio out-

puts will default to the HDMI audio output format.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting a Digital Camcorder

Cable/Satellite box

Connection to unit

Use a DV cable (not supplied) to connect the DV

in/out jack of your DV Digital Camcorder to the front

panel DV IN jack of this Recorder.

To use Timer-Link Recording, connect the INPUT1

jacks on the unit to the audio/video out jacks on your

Cable/Satellite box, using the optional audio/video

cables. (Refer to page 30 for “Timer-Link Recording”.)

Notes:

ꢀ This jack is for connection to DV equipment only. It

is not compatible with digital satellite tuners or D-

VHS video decks PC or MAC computers.

Cable/Satellite box

AUDIO OUT

VIDEO

OUT

ꢀ Disconnecting the DV cable while recording a

contents of the connected digital camcorder may

result in malfunction.

DV Digital Camcorder

IN/OUT

Rear of the unit

Accessory Audio/Video (A/V)

Recorder

Connections to

Front of Recorder

Connect the INPUT 1 or AV IN 2 jacks on the

Recorder to the audio/video out jacks on your acces-

sory component, using the optional audio/video

cables. (Refer to page 29 for [Basic Recording].)

Front of Recorder

Rear of Recorder

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup Wizard

Using the Home Menu

After the STANDBY/ON is pressed for the first time to

turn on the unit or after factory setting (See page 15),

the Initial Setup Wizard function sets the Language

and Clock step-by-step until the setup is complete.

From the Home Menu screen you can access all the

Media for playback and recording of the recorder.

1. Press HOME and the Home menu appears.

2. Use b / B to select the desired main option.

1. Use v / V to select a language for the Setup

menu and information display then press ENTER.

3. Use v / V to select the desired Sub option then

press ENTER to confirm your selection.

4. To exit the HOME menu, press HOME.

Setup

•

Start: Displays Setup menu.

2. Enter the necessary information for year, date and

time.

•

Timer Record: Displays [Timer Record List]

menu. (See page 31)

Movie

•

VCR: Plays back Video tape.

•

DISC:

Displays TITLE LIST menu for recordable disc

(page 34)

Plays back DVD-Video disc (pages 21-22).

b / B (left/right): Moves the cursor to the

previous or next column.

v / V (up/down): Changes the setting at the

current cursor position.

Photo (See page 26-27)

•

DISC: Displays [Photo List] menu for disc.

Press ENTER to confirm your setting.

Music (See page 25)

3. Press ENTER to exit the menu.

•

DISC: Displays [Music List] menu for disc.

Easy Menu

•

Dubbing: Displays [Dubbing] menu.

Disc Manager: Displays Disc Setup menu.

Rec. Mode: Displays Record Mode setup menu.

DV Input: Displays DV Input mode.

Note:

You can reset the Initial Setup Wizard from the

[Factory Set] in the setup menu.(see page 15).

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings

General Settings

To access to the General Setting.

In this menu system, there are several ways to cus-

tomize the settings provided. Most menus consist of

three levels to set up the options, but some require

greater depth for the variety of settings.

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

3. Use v / V to select

press B.

(General) option and

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

Clock Set

You can set the clock.

3. Use v / V to select the desired option.

1. Select the [Clock Set] option then B.

4. While the desired item is selected, press B to

move to the second level.

2. Enter the necessary information for year, date

and time.

5. Use v / V to select the second desired option.

6. Press B to move to the third level.

b / B (left/right): Moves the cursor to the

previous or next column.

v / V (up/down): Changes the setting at the

current cursor position.

7. Use v / V to select the desired setting then press

ENTER to confirm your selection.

Some items require additional steps.

3. Press ENTER to confirm your setting.

8. Press RETURN (O) or HOME to exit the Setup

menu.

TV Aspect

[4:3 Letter Box]: Select when a standard 4:3 TV

is connected. Displays theatrical images with

masking bars above and below the picture.

Note:

Press b to go back to the previous level.

[4:3 Pan Scan]: Select when a standard 4:3 TV is

connected. Displays pictures cropped to fill your

TV screen. Both sides of the picture are cut off.

[16:9 Wide]: Select when a 16:9 wide TV is con-

nected.

Power Save Mode

Set Power Save Mode to [ON] to place your

Recorder into an economic power save mode.

Factory Set

You can reset the Recorder to its original factory

settings.

1. Select the [Factory Set] option.

2. Press B to select [SET] then press ENTER.

3. Select [OK] and press ENTER.

4. Follow the Initial Setup Wizard on page 13.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Settings

Audio Settings

To access to the General Setting.

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

3. Use v / V to select

press B.

(Language) option and

3. Use v / V to select

(Audio) option and press B.

Each DVD disc has a variety of audio output options.

Set the Recorder’s Audio Output according to the

type of audio system you use.

Display Menu

Select a language for the Setup menu and

information display.

Dolby Digital / DTS / MPEG

[Bitstream]: Select [Bitstream] if you connect the

DIGITAL AUDIO OUTPUT jack to an amplifier or

other equipment with a Dolby Digital, DTS or

MPEG decoder.

Disc Menu / Audio / Subtitle

[Original]: Refers to the original language in

which the disc was recorded.

[PCM] (for Dolby Digital / MPEG): Select when

connected to a two-channel digital stereo amplifi-

er. DVDs encoded in Dolby Digital or MPEG will

be automatically downmixed to two-channel PCM

audio.

[Others]: To select another language, press num-

ber buttons then ENTER to enter the

corresponding 4-digit number according to the

language code list in the reference chapter (see

page 42). If you enter the wrong language code,

press CLEAR.

[OFF] (for DTS): If you select [OFF], the DTS

signal is not output through the DIGITAL AUDIO

OUTPUT jack.

[OFF] (for Disc Subtitle): Turn off Subtitle.

Note:

If the HDMI connection is used at the same time,

these audio outputs will default to the HDMI audio

output format.

•

The appearance of Audio and Subtitle not only

depended on the setting of Home Menu when

play a DVD disc; it depends on what languages of

audio and subtitle were pre-recorded in the disc

also.

Sampling Freq. (Frequency)

•

For some of DVD movies, the audio cannot be

changed by set the Home Menu, but you have to

access the DVD disc menu with ‘Disc menu/list’

button (on remote control) to change the language

of audio.

If your receiver or amplifier is NOT capable of han-

dling 96 kHz signals, select 48 kHz. When this choice

is made, this unit automatically converts any 96 kHz

signals to 48 kHz so your system can decode them.

If your receiver or amplifier is capable of handling 96

kHz signals, select 96 kHz. When this choice is

made, this unit passes each type of signal through

without any further processing.

Check the documentation for your amplifier to verify

its capabilities.

Download from Www.Somanuals.com. All Manuals Search And Download.

DRC (Dynamic Range Control)

Auto Chapter

With the DVD format, you can hear a program’s

soundtrack in the most accurate and realistic presen-

tation possible, thanks to digital audio technology.

However, you may wish to compress the dynamic

range of the audio output (the difference between the

loudest sounds and the quietest ones). This allows

you to listen to a movie at a lower volume without los-

ing clarity of sound. Set DRC to [ON] for this effect.

During recording, chapter markers are added auto-

matically at fixed intervals. You can set this interval to

5 minutes or 10 minutes. To turn off automatic chap-

ter marking, select [None].

Disc Settings

To access to the General Setting.

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

Recording Settings

3. Use v / V to select

(Disc) option and press B.

To access to the General Setting.

Initialize

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

If you load a completely blank disc, the recorder will

initialize the disc.

3. Use v / V to select

press B.

(Recording) option and

•

DVD-R: The recorder initialize the disc to Video mode.

The recording mode will always be Video mode.

Disc Record Mode

•

DVD-RW/DVD+RW/DVD+R/DVD-RAM: The Initialize

menu will appears. Select [OK] then press ENTER.

DVD-RW disc is initialized to Video mode.

You can set the picture quality for recording;

XP (High Quality), SP (Standard Quality),

LP (Low Quality), EP (Extend Quality)

Also, you can reformat the DVD-RW/DVD+RW from

the Setup menu as below.

1. Select the [Disc Record Mode] option then press B.

1. Select the [Initialize] option then press B.

[Start] icon is highlighted.

2. Use v / V to select a desired Disc Record Mode

(XP, SP, LP or EP).

2. Press ENTER.

3. Press ENTER to confirm your selection, then

press HOME to exit the menu.

•

In case of DVD-RW, use b / B to select a

desired Disc Initialize Mode (VR Mode or Video

Mode) then press ENTER.

VCR Record Mode

•

In case of DVD+RW/DVD-RAM, use b / B to

select [OK], and press ENTER.

It takes a few moments to format the disc.

You can set the picture quality for VCR recording;

SP (Standard Play), SLP (Super Long Play).

Caution:

If you want to change the disc format, everything

recorded on the disc will be erased.

DV Record Audio

You need to set this if you have a camcorder using

32kHz/12-bit sound connected to the front panel DV

IN jack. Some digital camcorders have two stereo

tracks for audio. One is recorded at the time of shoot-

ing; the other is for overdubbing after shooting.

On the Audio 1 setting, the sound that was recorded

while shooting is used. On the Audio 2 setting, the

overdubbed sound is used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Finalize

Disc Protect

Finalizing ‘fixes’ the recordings in place so that the

disc can be played on a regular DVD player or com-

puter equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen

for navigating the disc. The menu screen of the final-

ized disc can be accessed by pressing DISC

MENU/LIST or TITLE.

Depending on the type of disc you are using, Disc

Protect allows you to preserve your recordings in a

variety of ways:

•

DVD+RW: Prevents editing, erasing, or overwrit-

ing of existing recordings.

DVD+R: Prevents editing or erasing of existing

recordings.

Caution

DVD-RW (VR mode)/DVD-RAM: Prevents editing,

erasing, and regular recording.

Once you have finalized a DVD-R and DVD+R disc,

you cannot edit or record anything else on that disc

except DVD+RW. However, you can record and edit

a DVD-RW disc by choosing [Unfinalize] option.

Notes:

•

Disc Protect is not compatible with DVD-RW discs in

Video mode or DVD-R discs.

•

If you need to unlock a disc to make edits, select [OFF].

1. Select the [Finalize] option on the setup menu

then press B.

PBC

2. Press ENTER while [Finalize] is selected.

Finalize menu appears.

PBC stands for Playback Control and refers to special

menus and navigation features that are available on

some Video CDs.

3. Select [OK] then press ENTER.

The Recorder starts finalizing the disc.

[ON]: Video CDs are played according to the PBC, if

available.

Note:

Finalization can take up to 3-4 minutes or more depending

on the type of disc, how much is recorded on the disc, and

the number of titles on the disc.

[OFF]:Video CDs are played the same way as Audio

CDs.

DivX Registration Code

DivX

Tips:

We provide you the DivX^®VOD (Video On Demand)

registration code that allows you to rent and purchase

videos using the DivX^®VOD service. For more

information, visit www.divx.com/vod.

•

If you load a DVD-RW that has already been finalized,

you can ‘Unfinalize’ it by choosing [Unfinalize] from the

Finalize menu. After doing this, you can edit and re-

record onto the disc.

•

You cannot unfinalize a DVD-R and DVD+R disc.

1. Select [About DivX(R)] option then press B.

If [Disc Protect] option is set to [ON], the finalize is not

available. To finalize, set [Disc Protect] option to [OFF].

2. Press ENTER while [Enter] is selected and the

registration code will appear.

3. Use the registration code to purchase or rent the

videos from Divx^®VOD service at

Disc Label

www.divx.com/vod. Follow the instructions and

download the video onto a disc for playback on

this unit.

Use the Disc Label feature to enter a name for the

disc. This name appears when you load the disc and

when you display disc information on-screen.

Note:

•

The Disc label can be up to 32 characters long.

All the downloaded videos from DivX^®VOD can only

be played back on this unit.

For discs formatted on a different Recorder, you

will see only a limited character set.

1. Select the [Disc Label] option then press B.

[Edit] icon is highlighted.

2. Press ENTER.

Keyboard menu appears.

To enter characters, see page 38.

Download from Www.Somanuals.com. All Manuals Search And Download.

Displaying Disc Information

on-screen

General Explanation of

On-Screen Display

You can display various information about the disc or

tape loaded on-screen. Some items can be changed

using the menu.

Some DVDs require specific operation or allow only

limited operation during playback. When this occurs,

is displayed, action prohibited or not available.

1. Press DISPLAY once to show current status.

Example: DVD-RW in VR mode

Displaying Information While

Watching AV input source

While watching TV, press DISPLAY to display/

remove the information displayed on-screen.

The information will not be displayed during VCR

recording.

2. Press DISPLAY once again to show various

playback information.

The items displayed differ depending on the disc

type or playing status.

e.g., when DVD-RW in VR mode is inserted.

Indicates disc name and format.

Indicates input

source.

Indicates the record mode,

free space, and elapsed time

progress bar.

3. You can select an item by pressing v / V and

change or select the setting by pressing b / B.

For details about each item, see the pages in

parentheses.

Indicates current date and time.

Indicates operational mode of the recorder.

•

[Title]: Current title number/total number of

titles (page 21, 22)

•

[Chapter]: Current chapter number/total

number of chapters (page 21)

•

[Time]: Elapsed playing time (page 23)

[Audio]: Selected audio language (DVD

VIDEO only) or audio channel (page 22)

•

[Subtitle]: Selected subtitle (page 21)

[Angle]: Selected angle/total number of angles

(page 23)

•

[Sound]: Selected sound mode (page 23)

Note:

If no button is pressed for 10 seconds, the on-screen dis-

play disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playing a Tape

Playing a DVD

1. Press VCR to control the VCR deck.

2. Insert a pre-recorded video cassette.

1. Press DVD to control the DVD deck.

2. Press EJECT, OPEN/CLOSE (Z) to open the disc

tray. Load your chosen disc in the tray, with the

playback side down.

•

If the unit is powered off, it will power on

automatically when the tape is loaded.

3. Press EJECT, OPEN/CLOSE (Z) to close the

tray. Playback starts automatically. If playback

does not start, press PLAY (N) or Starts play-

back using HOME menu.

•

If the Timer indicator lights on the front panel

display window, press STANDBY/ON once.

3. Press PLAY (N) to start playback.

•

If a tape without a safety tab is inserted the

unit starts playback automatically.

4. To stop the playback, press STOP (x).

The unit records the stopped point, depending on

4. Press STOP (x) to stop playback.

the disc. “Xx” appears on the screen briefly.

•

If the tape reaches the end before you press

STOP (x) the Recorder automatically stops,

rewinds and ejects the tape.

Press PLAY (N) to resume playback (from the

scene point). If you press STOP (x) again or

unload the disc (“x” appears on the screen.), the

unit will clear the stopped point.

Notes:

S-VHS Quasi Playback (SQPB)

5. Press EJECT, OPEN/CLOSE (Z) to remove the

disc.

•

This Recorder can play back S-VHS recorded

tapes, however, it cannot make recordings using

S-VHS format tapes.

Press EJECT, OPEN/CLOSE (Z) to close disc

tray or press STANDBY/ON (1/&), the disc tray

closes automatically and unit turns off.

•

SQPB is an abbreviation for S-VHS Quasi Playback.

Note:

When do not use DVD, please take out DISC.

VCR Playback Options

Buttons

Operations

EJECT (Z)

PAUSE (X)

Ejects the tape in the VCR deck.

Pause playback.

Press repeatedly to step forward one frame at a time.

•

After 5 minutes in STILL mode the Recorder stops to protect

the tape and video heads.

FORWARD (M)

Scan forward. In Stop mode, fast forwards the tape.

In Pause mode, starts slow motion playback.

•

After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and

video heads

•

After 3 minutes in SLOW MOTION mode the Recorder goes back to PLAY mode to protect the

tape and video heads.

BACKWARD (m)

Scan backward. In Stop mode, rewinds the tape.

•

After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and

video heads.

CLEAR

Resets the current tape counter position to 0:00:00. To automatically goto tape counter

position 0:00:00, press RETURN while the tape is in Stop mode or in Play mode.

TRACKING (+/-)

AUDIO

Manually reduces noise on the screen during tape playback. Tracking is set

automatically when a tape is inserted.

Sets tape audio to HIFI, LEFT, RIGHT or NORMAL.

Use b/B buttons to select tape audio you want.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD or Video CD Playback Features

Discs

Buttons

Operations

OPEN / CLOSE (Z) Opens or closes the disc tray.

All Discs

PAUSE (X)

Pause playback.

All Discs

Press repeatedly to play Frame-by-Frame.

You can also use b / B to step backward and forward

while in Pause mode.

DVD ALL VCD

DVD ALL VCD DivX

ACD

BACKWARD (m) / FORWARD (M)

During playback, press repeatedly to select the required

scan speed.

- DVD; 5 steps,

- Video CD, DivX, Audio CD; 3 steps

DVD ALL VCD

In Pause mode, press BACKWARD (m) / FORWARD

(M) for slow motion playback.

- DVD; 4 steps,

- Video CD; 3 steps

•

This function is forward only for Video CD.

SKIP (. / >)

Press SKIP (> or .) briefly during playback to select DVD ALL VCD DivX

the next chapter/track or to return to the beginning of the

ACD MP3 WMA

current chapter/track.

Press SKIP (.) twice in quick successions to step back

to the previous chapter/track.

•

To go directly to any chapter/track during

playback, press DISPLAY twice and use v / V to select

the chapter or track (for Video CD) icon. Input the

chapter/track number or use b / B.

•

On a Video CD with PBC, you must set PBC to [OFF]

in the Setup menu to use this function (See page 18).

On an Audio CD, to go directly to any track, enter the

track number using the numbered buttons (0-9) during

playback.

ZOOM

TITLE

Enlarge the video image.

DVD ALL

(x1 size → x2 size → x4 size → x1 size (normal size))

You can move through the zoomed picture using b B v V

buttons.

If the current DVD title has a menu, the title menu appears

on the screen. Otherwise, the disc menu may appears.

DVD +RW

DVD DivX

DISC MENU/LIST

SUBTITLE

The disc menu appears on the screen.

During playback, press SUBTITLE then press b / B

repeatedly to select a desired subtitle language.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD or Video CD Playback Features (Continued)

Buttons

Operations

Discs

PLAY MODE

Select a desired play mode while playback.

[A-]: Repeats a sequence between A (Start point) and B

(End point) during playback. Press ENTER at your

chosen end point then the repeat sequence begins.

DVD ALL VCD ACD

Karaoke DVD

[CHAPTER]: Repeats the current chapter.

[TITLE]: Repeats the current title.

DVD ALL

DVD ALL Karaoke DVD

VCD ACD -RW

RAM

[ALL]: Repeats the all titles/tracks.

[Track]: Repeats the current track.

[RANDOM]: Random playback

VCD ACD MP3 WMA

VCD Karaoke DVD

MP3 WMA

[Folder]: Repeats all the tracks on a folder of a disc.

[OFF]: Does not play repeatedly.

DVD ALL

•

If you press SKIP (>) once during Repeat Chapter

(Track) playback, the repeat playback cancels.

•

By pressing SKIP (>) during Random playback, the

Recorder selects another title (track) and resumes

Random playback.

AUDIO

Press AUDIO then press b / B repeatedly to hear a

different audio language, audio track or encoding method.

DVD DivX

Note:

Some discs feature both Dolby Digital and DTS sound-

tracks. There is no analog audio output when DTS is

selected. To listen to the DTS soundtrack, connect this

recorder to a DTS decoder via one of the digital outputs.

See page 12 for connection details.

Press AUDIO then press b / B repeatedly during

playback to hear a different audio channel.

DVD ALL VCD

Download from Www.Somanuals.com. All Manuals Search And Download.

Camera Angle DVD

Special Playback Options

If the disc contains scenes recorded at different

camera angles, you can change to a different camera

angle during playback. Press DISPLAY then select

the Angle icon during playback. Use b / B to select a

desired angle. Note that the number of the current

angle appears on the display.

If a menu screen is displayed DVD VCD

In some cases, the disc menu might appear instead.

DVD

Use the b B v V buttons to select the title/chapter

you want to view, then press ENTER to start. Press

TITLE or DISC MENU/LIST to return to the menu

screen.

Tip:

The Camera Angle icon is displayed on the TV screen when

alternate angles are available.

VCD

Use the number buttons to select the track you want

to view and press RETURN to return to the menu

screen. Menu settings and operating procedures may

differ. Follow the instructions on each menu screen.

You may also set PBC to [OFF] (See page 18).

3D Surround DVD ALL VCD DivX

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

Time Search DVD ALL DivX

1. Press DISPLAY twice then use v / V to select the

sound icon. Then, use b / B to select [3D SUR.].

To start playing at any chosen time on the disc:

2. To turn off the 3D Surround effect, select

[NORMAL].

1. Press DISPLAY twice during playback. The time

search box shows the elapsed playing time.

2. Press v / V to select the time clock icon and

[-:--:--] appears.

Last Scene Memory DVD

3. Input the required start time in hours, minutes,

and seconds from left to right. If you enter the

This Recorder memorizes last scene from the last

disc that is viewed. The last scene remains in memo-

ry even if you remove the disc from the Recorder or

switch off the Recorder. If you load a disc that has

the scene memorized, the scene is automatically

recalled.

wrong numbers, press b B to move the under

bar (_) to the wrong number. Then enter the

correct numbers.

4. Press ENTER to confirm. Playback starts from the

selected time.

Notes:

•

Settings are stored in memory for use any time.

This Recorder does not memorize settings of a disc if

you switch off the Recorder before commencing to play

it.

Marker Search DVD ALL

To enter a Marker

•

Last Scene Memory function for a previous DVD title is

erased once a different DVD title is played.

You can start playback from up to six memorized

points. To enter a marker, press MARKER at the

desired point on the disc. The Marker icon appears

on the TV screen briefly. Repeat to enter up to six

markers.

To Recall or Clear a Marked Scene

1. During disc playback, press SEARCH.

The marker search menu appears on the screen.

2. Use b/B/v/V to select a marker scene that you

want to recall or clear.

3. Press ENTER and playback starts from the

marked scene. Or, Press CLEAR and use b / B

to select [OK] then press ENTER to delete

marked scene from the list.

4. To remove the Marker Search menu,

press RETURN (O).

Download from Www.Somanuals.com. All Manuals Search And Download.

Movie List menu options

Playing a DivX Movie File

1. Press v / V to select a folder/file on the [Movie

List] menu then press ENTER.

[Movie List] menu options appear.

The recorder can play DivX files. Before playing DivX

files, read “DivX file requirement” on right.

2. Press v / V / b / B to select an option, and press

ENTER.

1. Press HOME.

2. Select [Movie] option.

ꢀ [Play] Start playback the selected title.

ꢀ [Open] Opens the folder and a list of files in the

folder appears

3. Select a media that contains DivX file(s) then

press ENTER.

The [Movie List] menu appears on the TV screen.

DivX file requirement

Available resolution size: 720x576 (W x H) pixel

DivX file extensions: “.avi”, “.divx”

Playable DivX subtitle: “.smi”, “.srt”,

“.sub (Micro DVD format only)”,

“.txt (Micro DVD format only)”

Playable Codec format: “DIV3”, “MP43”, “DIVX”,

“DX50”

4. Press v / V to select a folder, and press ENTER.

A list of files in the folder appears. If you are in a

file list and want to return to the Folder list, use

Playable Audio format: “AC3”, “PCM”, “MP2”,

“MP3”, “WMA”

ꢀ Sampling frequency:

within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)

ꢀ Bit rate:

within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)

the v / V buttons on the remote to highlight

and press ENTER.

5. If you want to view a particular file, press v / V to

highlight a file and press PLAY (N).

You can use variable playback functions. Refer to

pages 21-22.

CD-R Format: ISO 9660 and JOLIET.

DVD±R/RW Format: ISO 9660 (UDF Bridge format)

Maximum Files/Disc: Less than 1999 (total number

of files and folders)

6. Press STOP to stop the playback. The [Movie

List] menu appears.

Notes on DivX format

ꢀ If the number of the screen frame is over 29.97

frames per second, this unit may not operate nor-

mally.

ꢀ If the video and audio structure of recorded file is

not interleaved, returns to the menu screen.

ꢀ If there is impossible code to express in the DivX

file name, it may be displayed as “_” mark.

ꢀ If the file is recorded with GMC, the unit supports

only 1-point of the record level.

Notice for displaying the DivX subtitle

If the subtitle does not display properly, please follow

the steps below.

1. Press PAUSE/STEP when the subtitle appears.

2. Press and hold SUBTITLE about 3 seconds.

The language code will appear.

3. Press b / B to select another language code until

the subtitle is displayed properly.

GMC?

GMC is the acronym for Global Motion

Compensation. It is an encoding tool specified in

MPEG4 standard. Some MPEG4 encoders, like

DivX, have this option.

There are different levels of GMC encoding, usu-

ally called 1-point, 2-point, or 3-point GMC.

4. Press PLAY (N) to continue playback.

Notes:

•

The DivX subtitle file name has to be identified

with the DivX file name to display by this unit.

•

TXT subtitle file can be displayed on the menu

list, but it is not playable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Music List menu options

Playing an Audio CD or

MP3/WMA files

1. Press v / V to select a track/file or folder on the

[Music List] menu then press ENTER.

The Recorder can play Audio CDs and MP3/WMA

files. Before playing MP3/WMA files, read [MP3/WMA

audio file requirement] on right.

1. Press HOME and the Home menu appears.

2. Select [Music] > [DISC] and press ENTER.

The [Music List] menu appears on the TV screen.

2. Use v / V to select an option, then press ENTER.

• [Play] Start playback the selected track or file.

• [Open] Opens the folder and a list of files in the

folder appears.

• [Random] Start or stop random playback.

Example) Audio CD

Random

3. Use v/V to select a track or file then press

PLAY (N). Playback starts.

1. Press v / V to select a file then press ENTER.

The menu options appear.

You can use variable playback functions. Refer to

pages 21-22.

2. Press v / V to select [Random] option then press

ENTER.

4. To stop playback at any time, press STOP (x).

The unit automatically begins random playback

and “RANDOM” appears on the menu screen.

Tips:

3. To return to normal playback, select [Random]

option again then press ENTER.

•

You can view TV channel or video input source by

pressing RETURN (O). If you want to return to the

[Music List] menu, press DISC MENU/LIST.

Tip:

Press DISPLAY to view ID3-Tag information for the MP3

file. If ID3-Tag information is not present, [ID3-Tag:

None] will appear. If you select a folder, the number of

subfolders and number of MP3/WMA files in the folder

are displayed. Press DISPLAY again to remove the

information screen.

By pressing SKIP ./> during Random play-

back, the unit selects another track and resumes

Random playback.

•

On CDs, DVDs with mixed content (Audio tracks,

MP3/WMA files or JPEG files), you can select between

the [Music List] menu and [Photo List] menu by pressing

TITLE repeatedly.

MP3/WMA audio file requirement

File extensions

“.mp3”, “.wma”.

If you are in a file list and want to return to the Folder

Sampling frequency:

within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)

list, use the v/V to highlight and press ENTER to

return to the previous menu screen.

Bit rate: within:

8 - 320kbps (MP3), 32 - 192kbps (WMA)

CD-R Format:

ISO 9660 and JOLIET.

DVD±R/RW Format:

ISO 9660 (UDF Bridge format)

Maximum Files/Disc:

Less than 1999 (total number of files and folders)

Download from Www.Somanuals.com. All Manuals Search And Download.

Photo List menu options

Viewing a JPEG files

1. Use v V b B to select a file then press ENTER.

The menu options appear.

This unit can play JPEG files. Before playing JPEG

recordings, read “Photo file requirement” on page 27.

1. Press HOME and the Home menu appears.

2. Select [Photo] > [DISC]] and press ENTER.

3. Use v V b B to select a file or folder and press

ENTER.

2. Use v / V to select an option then press ENTER

to confirm your selection.

• [Open] Opens the folder and a list of files in the

folder appears.

• [Full Screen] Shows the selected file as full

screen.

2. Use v / V to select option and press ENTER.

• [Slide Show] Displays Slide Show menu.

Example: When you select a file.

3. Use v / V to select [Full Screen] then press

ENTER.

The selected image is displayed in full screen.

Still picture

Use PAUSE/STEP (X) while viewing slide show to

pause mode.

Skip Images

While viewing a picture, press SKIP (> or .)

once to advance to the next file or return to the

previous file.

Rotate Images

Press ENTER to make this menu appear or disappear.

Use v / V while viewing a picture to flip the picture

clockwise or counterclockwise.

4. To stop viewing at any time, press STOP (x).

Notes:

•

If the icon displays in the [Photo List] menu, it

means you cannot see those JPEG files.

•

You can view TV channel or video input source by

pressing RETURN (O). If you want to return to the

[Photo List] menu, press DISC MENU/LIST.

•

If you are in a file list and want to return to the Folder

list, use the v/V to highlight and press ENTER to

return to the previous menu screen.

On CDs, DVDs with mixed content (Audio tracks,

MP3/WMA files or JPEG files), you can select between

the [Music List] menu and [Photo List] menu by pressing

TITLE repeatedly.

Download from Www.Somanuals.com. All Manuals Search And Download.

View Slide Shows

Photo file requirement

1. Select [Slide Show] option on the [Photo List]

menu.

File extensions

“.jpg”

Photo size:

2. Press ENTER.

ꢀ Resolution size: 1280 x 720 (W x H) pixel

ꢀ Less than 4MB recommended

CD-R Format:

ISO 9660 and JOLIET.

DVD±R/RW Format:

ISO 9660 (UDF Bridge format)

Maximum Files/Disc:

Less than 1999 (total number of files and folders)

3. Use b / B / v / V to set the options.

[Object] option:

• [Selected] Views slide show only selected

files.

Notes on JPEG file

ꢀ Progressive and lossless compression JPEG

image files are not supported.

ꢀ Depending on the size and number of the JPEG

files, it may take several minutes to read the con-

tents of the media.

• [All] Views slide show all files.

[Speed] option:

Sets the Slide Show speed to

[Normal], [Slow], or [Fast].

4. Select the [Start] option then press ENTER to

start the Slide Show.

5. Press STOP (x) to stop the Slide Show and

returns to the [Photo List] menu.

Tips:

•

Selecting multiple files

1. Press MARKER.

A check mark appears on the file. Press MARKER

again to cancel the marked file.

2. Repeat step 1 to mark additional file.

•

Use the CLEAR button to select all files, or cancel all

marked files.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

About DVD recording

•

The displayed times for recording and time

remaining may not always add up to exactly the

length of the disc.

Notes:

•

The recording time available may decrease if you

heavily edit a disc.

•

This Recorder cannot record CD-R or CD-RW

discs.

If using a DVD-RW disc, make sure you change

the recording format (Video mode or VR mode)

before you record anything on the disc. See page

17 (Initialize) for how to do this.

•

Fingerprints and small scratches on a disc can

affect playback and/or recording performance.

Please take proper care of your discs.

•

The company does not hold any responsibility to

compensate the contents which should have

been recorded, and any losses or damages (e.g.

losses of business profit, or business intermis-

sion) that may arise from malfunction of this

recorder (not recording/editing as intended).

•

When using a DVD-R or DVD+R disc, you can

keep recording until the disc is full, or until you

finalize the disc. Before you start a recording

session, check the amount of recording time left

on the disc.

When using a DVD-RW disc in Video mode or

DVD+RW disc, recording time available will only

increase if you erase the last title recorded on the

disc.

When do not use DVD, please take out DISC.

Disc types and recording formats, modes,

and settings

•

When using a DVD-RW disc in VR mode,

recording time available will increase if you erase

any title recorded on the disc.

This recorder can play many different kinds of DVD

discs: pre-recorded DVD-Video discs, DVD-RW,

DVD-R, DVD+RW, DVD+Rand DVD-RAM discs. The

disc format for DVD-R, DVD+R, DVD+RW discs is

always “Video format”—the same as pre-recorded

DVD-Video discs. This means that once finalized, you

can play a DVD-R, DVD+R, or DVD+RW in a regular

DVD player. The DVD-RAM disc format is Video

Recording (VR) format.

The DVD-RW disc format is Video Recording (VR)

format or Video format. You can change Recording

format, if required. (Reinitializing the disc will erase

the contents of the disc.)

The recording mode is closely related to the disc for-

mat. If the disc format is Video Recording format,

then the recording mode is VR mode; if the disc for-

mat is Video format, then the recording mode is

Video mode (except for DVD-Video, which is not

recordable, and so does not have a recording mode).

These can be changed as required for each record-

ing and determine the picture quality and how much

space the recording will take up on the disc.

The Delete Title option in the Title List (Original)

menu only hides the title, it does not actually

erase the title from the disc and increase the

recording time available (except for the last

recorded title on a DVD-RW disc in Video mode).

•

Overwrite recording is available using DVD+RW

discs.

When using a DVD+R/RW, the recorder will exe-

cute the Menu-making operation to update the new

title and editing when removing the disc from the

recorder.

•

If the unit detects the copy-protected signal while

recording, the recording will be paused temporarily

until the signal switchs to recordable signal.

Recording time and picture

quality

There are four preset recording quality modes:

ꢀ XP – Highest quality setting, gives about

1 hour 20 minutes of recording time on a DVD

(4.7GB).

ꢀ SP – Default quality, sufficient for most applica-

tions, gives about 2 hours of recording time on a

DVD (4.7GB).

ꢀ LP – Slightly lower video quality, gives about 4

hour of recording time on a DVD disc (4.7GB).

ꢀ EP – Low video quality, gives about 6 hour of

recording time on a DVD (4.7GB).

Notes for recording

•

The recording times shown are not exact

because the recorder uses variable bit-rate video

compression. This means that the exact record-

ing time will depend on the material being record-

ed.

•

When recording, if the reception is poor or the

picture contains interference, the recording times

may be shorter.

If you record still pictures or audio only, the

recording time may be longer.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD: Each subsequent press increases the recording

time by 10 minutes.

Basic Recording

(One-Touch Recording)

VCR: Each subsequent press increases the recording

time by 30 minutes (maximum 540 minutes).

Please confirm the VHS tape has enough

remaining time to be recorded before

recording.

You can record from an external component, such as

a TV, camcorder or VCR, connected to any of the

Recorder’s external inputs.

1. Make sure that the component you want to record

from is connected properly to the Recorder. See

page 13.

Checking the Recording Time

Press z REC or DISPLAY once to check the record-

ing time. The recalled setting will automatically return

to the TV screen for a moment.

2. Press AUX repeatedly to select the external input

to record from.

Also, remaining time of recording is shown in the dis-

play window.

•

AV1: Audio/Video Input mounted on back

panel.

AV2: Audio/Video Input mounted on front

panel.

To Extend the Recording Time

The recording time can be extended anytime by

pressing z REC.

Each subsequent press increases the recording time

by 10 minutes (DVD) or 30 minutes (VCR).

DV: DV Input mounted on front panel.

3. Load a recordable disc or tape.

4. Set a recording mode as necessary by pressing

REC MODE repeatedly.

DVD: SP, LP, EP or XP.

VCR: SP or SLP

To Pause the Recording

1. Press PAUSE/STEP (X) to pause the recording.

5. Press z REC once to start recording.

The REC indicator lights in the display window.

2. When you want to continue recording, press

PAUSE/STEP (X) or z REC.

6. Press STOP (x) to stop recording.

Notes:

•

Check that the Audio In settings DV Record Audio

are as you want them. See page 17.

•

If you press PAUSE/STEP (X) during the Instant Timer

Recording, it will be canceled.

The Recorder will automatically power off when the

Instant Timer Recording ends.

•

If your source is copy-protected using CopyGuard,

you will not be able to record it using this recorder.

See Copyright on page 5 for more details.

If the unit is DVD mode when the VCR Instant timer

recording ends, the unit will not automatically power off.

•

Recording continues until you press STOP (x) or

the disc is full.

Simultaneous Play and

Record

To record for a fixed length of time, see [Instant

Timer Recording] on this page.

You can play a DVD during the VCR recording, press

DVD to change DVD mode and perform the DVD

playback.

Instant Timer Recording

Notes:

•

You cannot play or record both DVD and VCR at

the same time.

Instant Timer Recording allows you to make a

recording easily of a preset length without using the

program timer.

You cannot change VCR mode during the DVD

recording mode.

1. Follow steps 1-4 as shown left (Basic Recording

from a TV).

2. Press REC once to begin recording.

3. Press REC two additional times to set the DVD

recorder to 10min recording time or the VHS

recorder to 30min recording time.

If you wish VCR playback or record during the

DVD playback, press VCR to change VCR mode

and perform the VCR playback or recording.

4. Each subsequent press increases the recording

time by 10 minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

The external timer record will be set to off

automatically when:

- There is no recordable tape.

- STOP or PAUSE button is pressed while

external timer recording.

Timer-Link Recording

(External Timer Recording)

- The power of this unit is ON in the external

timer record standby mode.

If the external device such as Cable/Satellite box that

is connected to this unit has the timer reservation

function, this unit can record the input signal from

external device via the timer INPUT 1 jack.

- When you press the z (REC) for more than

3 seconds again in the external timer record

standby mode.

1. Connect the INPUT 1 input jacks on this unit to

the VIDEO AUDIO(L/R) jack on the external

device using the audio/video cables.

Program Priority

If the recording time of this unit and the external

device are overlap:

The earlier program takes priority. When the earlier

program finishes, the later program starts.

2. Set the timer reservation setting of the external

device.

3. Turn off the external device.

Timer Link record

4. Insert a recordable disc or video cassette with the

safety tab intact to this unit. Select the recording

speed with remote.

Timer Record of this unit

5. Press z (REC) for more than 3 seconds on the

front panel when the unit power is off.

The " " mark will flashes on the display window.

This unit is set to standby mode for Timer-Link

recording.

Notes:

•

If the power of the external device is on by the

timer reservation setting, this unit detects the

signals of external device and start the

recording automatically.

If the power of the external device is off during

external timer recording, this unit will be stop

the external timer recording and turns off the

power automatically.

If the power of the external device is on again,

this unit will be start the external timer record-

ing again.

•

Press STOP (x) to stop recording intentionally

while external timer recording is in progress.

The external timer record is available only for

the device that is connected with INPUT 1 jack

on this unit.

•

Your external device such as Cable/Satellite

box might keep running Audio/Video signals

through the OUTPUT jack, even if the unit is

powered off. If so, Timer-Link recording

doesn’t work.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

If the unit is DVD mode when the VCR timer record-

ing ends, the unit will not automatically power off.

Timer Recording

There is a short delay when a timer recording fin-

ishes to confirm the recorded program. If two

timer recordings are set to record sequentially

(one right after the other), the later program may

not be recorded.

The Timer Recording function allows you to record up

to 16 programs within a period of one month.

1. Press HOME and the Home menu appears.

2. Select [TV] > [Timer Record] and press ENTER.

•

You must press STOP (x) to stop the Timer

Recording.

Checking Timer Recording Details

Programming can be checked whenever the

Recorder is turned on.

1. Press HOME and the Home menu appears.

2. Select [TV] > [Timer Record] and press ENTER.

3. Use v / V to select a program.

4. Press ENTER to edit the selected program.

Timer Record menu appears.

3. Select [NEW] and press ENTER.

The Timer Record menu will appear.

Canceling a Timer Recording

You can clear a timer setting anytime before the

recording actually starts.

•

Use v / V to select a program you want to erase

on the [Timer Recorder List] menu, then press

CLEAR and select [OK] then press ENTER.

•

[Media] – Choose a media (DVD or VCR).

[INPUT] – Choose one of the external inputs

from which to record (AV1 or AV2).

Timer Recording Troubleshooting

•

[Date] – Choose a date up to 1 month in

advance, or select a daily or weekly program.

Even though the timer is set, the recorder will not

record when:

•

[Start Time] – Set the recording start time.

[End Time] – Set the recording end time.

•

There is no disc (or tape) loaded.

A non-recordable disc (or tape) is loaded.

[Mode] – Choose a record mode.

DVD: XP, SP, LP, EP or AT (Auto)

VCR: SP, SLP or AT (Auto)

AT(Auto) mode determines how much time is avail-

able on the disc or tape and switches record mode,

if necessary, to complete recording the program.

Disc Protect is set to [ON] in the Disc menu

(see page 17).

•

There are already 99 titles (DVD-RW, DVD-R,

DVD-RAM), 49 titles (DVD+RW, DVD+R)

recorded on the disc.

You cannot enter a timer program when:

4. Enter the necessary information for your timer

recording(s).

•

A recording is already underway.

•

b / B (left/right) – Move the cursor left/right

v / V (up/down) – Change the setting at the

current cursor position.

The time you’re trying to set has already

passed.

•

There are already 16 timer programs set.

•

Press RETURN (O) to return to the [Timer

Record List] menu.

If two or more timer programs overlap:

•

The earlier program takes priority.

5. Press ENTER to save the program.

When the earlier program finishes, the later

program starts.

6. Press RETURN (O) to exit the [Timer Record

List] menu.

•

If two programs are set to start at exactly the

same time, the program entered first takes

priority.

Notes:

•

You must insert a recordable disc or tape.

•

The Timer indicator lights on the front panel

display.

If the disc is damaged, the recording may not

complete successfully. In this case even though the

Check field shows [Rec. OK], it may not be.

•

The Recorder will automatically power off when

the Timer Recording ends.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dubbing from DVD to VCR

Dubbing from VCR to DVD

You can copy the contents of a DVD to a VHS tape

using the DUBBING button.

You can copy the contents of a VHS tape to a DVD

using the DUBBING button. This allows you to

archive your old VHS tapes to DVD.

1. Insert a blank VHS videotape into the VCR deck.

1. Insert a blank DVD disc in the DVD deck and

close the disc tray.

2. Insert the disc you wish to copy in the DVD deck

and close the disc tray.

2. Insert the VHS video tape you wish to copy into

the VCR deck.

3. Select DVD mode by pressing DVD on the remote

control or pressing DVD/VCR on the front panel.

3. Select VCR mode by pressing VCR on the remote

control or pressing DVD/VCR on the front panel.

4. Find the place on the DVD (or Disc) from which

you want to start dubbing using the PLAY, FF,

REW and PAUSE functions.

4. Find the place on the VHS tape from which you

want to start dubbing using the PLAY, FF, REW

and PAUSE functions. For best results, pause

playback at the point from which you want to

record.

For best results, pause playback at the point from

which you want to record.

5. Press the DUBBING button.

The Dubbing menu appears.

5. Press the DUBBING button.

The Dubbing menu appears.

6. Use v / V / b / B to select the desired Record

Rec. Mode: SP or SLP (3 times SP).

6. Use v / V / b / B to select the desired Record

Rec. Mode: XP, SP, LP or EP.

7. Select [Dubbing] then press ENTER or DUBBING

to start copying.

7. Select [Dubbing] then press ENTER or DUBBING

to start copying.

8. To stop dubbing at any other time,

press STOP (x).

You must stop the dubbing process manually

when the DVD movie ends, or the unit may replay

and record over and over again.

8. To stop dubbing at any other time,

press STOP (x).

Dubbing will stop automatically when the VHS

tape ends.

Note:

If the DVD (or Discs) you are attempting to copy is

copy protected, you will not be able to copy the disc.

It is not permitted to copy Macrovision encoded

DVDs (or Discs). [Copy-protected. Cannot record.] is

displayed on the TV screen.

If the VHS video tape you are attempting to copy is

copy protected, you will not be able to copy the tape.

It is not permitted to copy Macrovision encoded

tapes.

Tip:

If you press PAUSE during Dubbing mode, both the

DVD and VCR decks go into Pause mode and the

DUBBING button blinks on the front panel. While in

Pause mode, you can adjust the VCR playback

position using PLAY, REW, FF, PAUSE/STEP, etc.

The DVD deck will remain in Pause mode.

To resume Dubbing, press the DUBBING button

twice.

If you press PAUSE during Dubbing mode, both the

DVD and VCR decks go into Pause mode and the

DUBBING button blinks on the front panel. While in

Pause mode, you can adjust the DVD playback posi-

tion using PLAY, REW, FF, PAUSE/STEP, etc. The

VCR deck will remain in Pause mode. To resume

Dubbing, press the DUBBING button twice.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

You cannot record date and time information from

a DV cassette.

Disconnecting the DV cable while recording a

contents of the connected digital camcorder may

result in malfunction.

Recording from DV Input

Before DV dubbing

You can connect a DV-equipped camcorder to this

recorder using a single DV cable for input and output

of audio, video, data and control signals.

ꢀ This recorder is only compatible with DV-format

(DVC-SD, DV25) camcorders. Digital satellite

tuners and Digital VHS video recorders are not

compatible.

ꢀ You cannot connect more than one DV camcorder

at a time to this recorder.

ꢀ You cannot control this recorder from external

equipment connected via the DV IN jack (including

two recorders).

1. Make sure your digital camcorder is connected to

the front panel DV IN jack. See page 13.

2. Press AUX repeatedly to select the DV input.

3. Find the place on the camcorder tape that you

want to the recording to start from.

For best results, pause playback at the point from

which you want to record.

ꢀ Depending on your camcorder, you can use

this recorder’s remote to control the camcorder

using the STOP, PLAY, BACKWARD, FOR-

WARD and PAUSE functions.

ꢀ It may not always be possible to control the con-

nected camcorder via the DV IN jack.

ꢀ Digital camcorders can usually record audio as

stereo 16-bit/48kHz, or twin stereo tracks of 12-

bit/32kHz. This recorder can only record one stereo

audio track. Set [DV Record Audio] option to Audio

1 or Audio 2 as required (see page 17).

ꢀ Audio input to the DV IN jack should be 32 or

48kHz (not 44.1kHz).

ꢀ Picture disturbance on the recording may occur if

the source component pauses playback or plays an

unrecorded section of tape, or if the power fails in

the source component, or the DV cable becomes

disconnected.

4. Press z REC once to start recording.

ꢀ Recording is automatically stopped if the

recorder detects no signal.

ꢀ You can pause or stop the recording by press-

ing PAUSE/STEP (X) or STOP (x).

You cannot control the camcorder from this

Remote Control during recording.

ꢀ In Video mode, the final frame of the recording

may remain displayed on screen for a while

after recording stops.

Note:

When ‘Not connected to camcorder’ shows on the TV

screen, the PLAY & RECORD functions won’t work.

To resume these functions, press AUX to get out of

DV input mode.

Note:

•

Connect the DV cable after turnning the

camcorder off.

•

The unit may not acknowledge the camcorder

depending on the kinds. In this case, you may

have it acknowledged by switching the unit off,

and then on.

Troubleshooting

If you cannot get a picture and/or audio through the

DV IN jack, check the bullet points:

ꢀ Make sure the DV cable is properly connected.

ꢀ Try switching off the connected equipment then

switch back on.

Recording from a Digital Camcorder

You can record from a digital camcorder connected to

the DV IN jack on the front panel of this recorder.

Using the recorder’s remote, you can control both the

camcorder and this recorder.

Before recording, make sure that the audio input for

the DV IN jack is set up (see page 17).

ꢀ Try switching the audio input.

Note:

Depending on the connected camcorder, you may not

be able to control it using the Remote Control supplied

with this recorder.

•

If you connect a second recorder using a DV

cable, you cannot control the second DVD from

this one.

You cannot control this unit remotely from a com-

ponent connected to the DV IN jack.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

Title List and Chapter List

Menu Overview

1 2

6 7

Using the Title List menu you can edit video content.

The editing features available in the Title List menu

depend on whether you are editing video on DVD,

and whether you’re editing Original content, or a

Playlist.

There are two ways to edit VR mode DVD-RW discs.

You can directly edit the Original content of the disc,

or you can create and edit a Playlist. The Playlist

doesn’t actually change any of the content on the

disc, but just controls how the content is played back.

1. Press DISC MENU/LIST to display the TITLE

LIST menu.

Playback should be stopped when you do this.

1. Menu options: To display menu option, select a

title or chapter then press ENTER. The options

displayed differ depending on the disc type.

• [Play] Start playback of the selected title or chapter.

The hidden titles and chapters on the DVD+R/RW

cannot be play back.

ꢀ When selecting titles, use the v / V buttons to

display the previous/next page if there are more

than six titles.

ꢀ If you are editing a VR mode disc, press DISC

MENU/LIST to switch between Original and

Playlist menu.

• [Search]

- [Chapter] ; Displays Chapter List of the Title.

- [Time] ; Search time for you want start point

of the title .

ꢀ On the left side of the screen are the menu

options. The main part of the screen shows

thumbnails of the titles (or chapter) on the DVD.

You can change these thumbnails using the

THUMBNAIL button. (see [Changing the Title

Thumbnails] on page 35.)

• [Delete] Deletes the title or chapter. (page 37)

• [Move] Moves chapter position on [Chapter List -

Playlist] menu (page 39).

• [Protect] Protects accidental recording, editing or

deleting of the title.(page 39).

• [Edit] Edits or Deletes a part of the title.

- [Title Name] Edits the title name. (page 38).

- [Delete Part] Deletes a part of the Title (page 37).

- [Divide] Divides a title into two (page 40).

- [Hide (Show)] Hides (or Shows) the selected title or

chapter. (page 39)

• [Playlist Add] Adds the title or chapter to the Playlist.

(page 36)

• [Dubbing] Dubs the title to VCR (page 32).

• [Title] Displays Title List of the chapter.

• [Combine] Combines two titles or chapters into one

(page 40).

ꢀ Press DISPLAY to display the information of

selected title on the Title List menu.

ꢀ After selecting a title or chapter on the Title List

or Chapter List menu, then press ENTER. The

menu options on the left side of the menu. Use

v / V to select a option then press ENTER to

confirm your selection.

2. To exit the TITLE LIST menu, press

RETURN (O) repeatedly.

• [Full Play] Starts playback of the selected title includ-

ing the hidden chapters.

2. Current media.

3. Indicates the record mode, free space, and

elapsed time progress bar.

4. Currently selected title.

5. Thumbnail.

6. Shows the selected title number and total number

of titles.

7. Shows the title name, recorded date, and record-

ing length.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding Chapter Markers

VR Mode: Original and

Playlist Editing

-RW

+RW

RAM

You can create chapters within a title by inserting

chapter marks at the desired points.

Titles, Chapters and Parts

Titles in the disc’s original content contain one or

more chapters. When you insert a disc’s title into the

Playlist, all the chapters within that title also appear.

In other words, chapters in the Playlist behave exact-

ly as chapters on a DVD-Video disc do. Parts are

sections of Original or Playlist titles. From the Original

and Playlist menu you can add or delete parts.

Adding a chapter or title to the Playlist creates a new

title made up of a section (ie., chapter) of an Original

title. Deleting a part removes part of a title from the

Original or Playlist menu.

Note:

Chapter markers are inserted at regular intervals

automatically. You can change this interval from the

Initial Setup menu (see [Auto Chapter] on page 16).

During recording or playing back, at the point you

want to start a new chapter, press CHAPTER.

A chapter marker icon appears on the TV screen.

Changing the Title Thumbnails

Caution:

-RW

+RW

RAM

ꢀ When editing using the Delete, Add and Move func-

tions, the start and end frames may not be exactly

as set in the start and end point display.

ꢀ During Playlist playback, you may notice a momen-

tary pause between edits. This is not a malfunction.

Each title displayed in the Title List menu is repre-

sented by a thumbnail picture taken from the start of

that title or chapter.

If you prefer, select a different still picture from within

a title.

Press THUMBNAIL to make the currently displayed

picture the one that appears in the Title List menu.

The still picture that you choose appears in both the

Original or Playlist menu.

Is editing a DVD like editing a video tape?

No. When you edit a video tape you need one video

deck to play the original tape and another to record

the edits. With DVD, you edit by making a ‘Playlist’ of

what to play and when to play it. On playback, the

Recorder plays the disc according to the Playlist.

-RW

RAM

Tip

You can also change the thumbnail picture of the title

on the Chapter List menu. Select a chapter on the

Chapter List menu then press THUMBNAIL. The

thumbnail picture of the title that includes the chapter

is changed.

About word ‘Original’ and ‘Playlist’

-RW

RAM

Throughout this manual, you will often see the words

Original and Playlist to refer to the actual content and

the edited version.

ꢀ Original: content refers to what’s actually recorded

on the disc.

ꢀ Playlist: content refers to the edited version of the

disc — how the Original content is to be played.

Download from Www.Somanuals.com. All Manuals Search And Download.

Making a New Playlist

Adding Additional Title /

Chapters to the Playlist

-RW

RAM

-RW

RAM

Use this function to add an Original title or chapter to

the Playlist. When you do this, the whole title or

chapter are put into the Playlist (you can delete bits

you don’t need later - see [Deleting an Original or

Playlist title/chapter] on page 37).

You can add an Original title or chapter to add to a

Playlist title even if it is already registered.

1. Choose a title or chapter on the [TITLE LIST-

Original] menu or [Chapter List-Original] menu to

put into the Playlist, then press ENTER.

The menu options appears on the left side of the

screen.

The title appears in the Playlist complete with the

chapter markers that appear in the Original. However,

if you add more chapter markers to the Original later,

these are not automatically copied over into the

Playlist title.

2. Use v / V to select [Playlist Add] from menu

options then press B.

You can add up to 999 chapters to one disc.

1. Choose a title or chapter on the [TITLE LIST-

Original] menu or [Chapter List-Original] menu to

put into the Playlist, then press ENTER.

The menu options appears on the left side of the

menu.

2. Use v / V to select [Playlist Add] option then

press B.

3. Choose a Title List-Playlist that is already regis-

tered to insert a title or chapter, then press

ENTER.

4. Repeat steps 1-3 to add additional title or chapter

on the Playlist.

You can view the added chapters on the [Chapter

List-Playlist] menu.

3. Select [New Playlist] then press ENTER.

The new title appears in the updated Playlist. All

chapters of the title are added to the Playlist.

5. Press RETURN (O) to exit, or DISC MENU/LIST

to go back to the [Title List-Original] menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

-RW

RAM

Deleting an Original or

Playlist Title/Chapter

When you erase a title or chapter from the Playlist

menu, you only remove it from the Playlist; the

title/chapter remains in the Original menu.

Deleting a Part

You can delete a part which you do not want in the

title.

1. Use b / B / v / V to choose a title you want to

delete on the Title List menu then press ENTER.

The options appears on the left side of the menu.

If you choose to delete a title or chapter from the

Original (title/chapter) menu, the title or chapter is

actually deleted from the disc and the remaining time

available for recording increases. Titles/chapters

deleted from the Original are also removed from the

Playlist.

2. Select [Edit] > [Delete Part] option then press

ENTER.

[Edit] menu appears on the TV screen.

Example: Edit (Delete Part) (DVD-VR)

Note:

It may not be possible to delete chapters that are less

than 3 seconds long.

1. Use b / B / v / V to choose a chapter or title you

want to delete on the [TITLE LIST] or [Chapter

List] menu then press ENTER.

The menu options appears on the left side of the

screen.

2. Select [Delete] option from the options on the

menu.

3. Use play, pause step, search and slow-motion to

find the starting point.

Example: Title List (DVD-VR)

4. Press ENTER at the starting point of the section

you want to delete.

[End Point] icon is highlighted.

The part is indicated on the Progress Bar.

5. Use play, pause step, search and slow-motion to

find the ending point.

6. Press ENTER at the ending point of the section

you want to delete.

You can cancel the selected point, use v / V to

select [Cancel] icon then press ENTER.

3. Press ENTER to confirm.

The confirm message for deleting will appear.

7. If you finish to edit, select [Done] icon then press

ENTER.

4. Use b / B to select [OK] then press ENTER.

The selected chapter or title is deleted.

After pressing ENTER, the new, updated menu is

displayed.

The confirm message for deleting will appear.

Use b / B to select [OK] then press ENTER.

The selected part is deleted from the title and Title

List menu appears.

5. Repeat steps 1 - 4 to continue to delete from the

menu.

Notes:

•

6. Press RETURN (O) repeatedly to exit the menu.

It may not be possible to delete parts that are less than

3 seconds long.

Notes:

•

If you select [Cancel] then press ENTER, the Recorder

will go to previous option and into Pause mode.

•

When DVD+RW recording, the deleted title’s

name is changed to [Deleted Title].

If more than two titles are repeatedly deleted, the

titles are combined into one.

When you are deleting a title or chapter, only the

last one on DVD+R/RW increases remaining

recording time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes:

Naming a Title

•

Names can be up to 32 characters long.

You can name the titles.

•

For discs formatted on a different recorder, you

will see only a limited character set.

1. Choose the title you want to name on the Title List

menu, then press ENTER.

•

When recording on DVD-R, DVD-RW or DVD+R

discs, the entered name is displayed on the DVD

player only after finalization.

The menu options appears on the left side of the

menu.

2. Use v/V to select [Edit] > [Title Name] option then

press ENTER.

Keyboard menu appears.

Time Search

You can select start point of the title.

1. Use b / B / v / V to choose a title on the TITLE

LIST menu then press ENTER.

The options appears on the left side of the menu.

2. Select [Search] > [Time] option then press

ENTER.

[Time] menu appears on the TV screen.

3. Enter a name for the title. Use b / B / v / V to

select a character then press ENTER to confirm

your selection.

•

Language: Selects a keyboard type.

Space: Inserts a space at the cursor position.

Delete: Deletes the character to the left of the

cursor position.

•

b / B: Moves the cursor left or right.

OK: Confirms the name you have entered.

End time

Cancel: Deletes all characters and exits the

Keyboard menu.

Current picture

Selected time

Remote Control buttons for entering a name

•

PLAY (N): Inserts a space at the cursor posi-

tion.

Selected point

Start time

PAUSE/STEP (X): Deletes the character to

the right of the cursor position.

3. Use b / B to find the point you want to start.

The point increase 1 minute step.

If you press and hold b / B then the point

increase 5 minute step.

SKIP (. / >): Moves the cursor left or

right.

STOP (x), CLEAR: Deletes the character to

the left of the cursor position.

4. Press ENTER to start selected point.

0-9: Enters the character corresponding to the

selected column.

DISC MENU/LIST, DISPLAY: Switches the

keyboard type.

4. Choose [OK] then press ENTER to fix the name

and return to the previous menu screen.

5. Press RETURN (O) repeatedly to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip:

Moving a Playlist Chapter

If you select a hidden chapter or title on the TITLE

LIST or Chapter List menu, you can ‘show’ it by

choosing [Show] option on the menu. After doing that,

you are able to see the chapter or title.

-RW

RAM

Use this function to re-arrange the playing order of

Playlist chapters on the Chapter List-Playlist menu.

Note:

This function is not available if there is only one

chapter.

Protect a Title

+RW

-RW

RAM

1. Select a chapter on the Chapter List-Playlist

menu.

Use this function to protect against accidental record-

ing, editing or deleting of the title.

2. Press ENTER.

The menu options appears on the left side of the

menu.

1. Press DISC MENU/LIST to display the [TITLE

LIST] menu.

3. Use v / V to select [Move] option from Playlist

options then press ENTER.

2. Use v V b B to choose a title you want to protect

then press ENTER.

Options appear on the left side of the screen.

3. Select [Protect] from the options.

Example: Title List (DVD-VR)

4. Use b / B / v / V to choose the place you want to

move the chapter then press ENTER.

After pressing ENTER, the updated menu is

displayed.

4. Press ENTER to confirm.

The lock mark will appears on the title’s

thumbnail.

Hide a Chapter/Title

+RW

Tip:

If you select a title that has already been protected

on the Title List menu, you can ‘unprotect’ it by

choosing [Unprotect] option from the Title List menu

options. After doing that, you can edit and delete the

title.

You can skip playing chapters or titles without delet-

ing from the disc.

1. Use v V b B to choose a chapter or title you

want to hide on the [TITLE LIST] or [Chapter List]

menu, then press ENTER.

Options appear on the left side of the screen.

2. Select [Edit] > [Hide] option.

Example: Title List (DVD+RW)

3. Press ENTER to confirm.

The chapter’s or title’s thumbnail will dim.

Download from Www.Somanuals.com. All Manuals Search And Download.

Divide One Title Into Two

+RW

Combining Two Chapters

-RW

+RW

RAM

Into One

Use this function to combine two adjacent chapters

into one.

Use this command to split a title up into two new

titles.

1. On the Chapter List menu, select the second

chapter of the two chapters you want to combine

then press ENTER

1. On the Title List menu, select a title you want to

divide then press ENTER.

The menu options appears on the left side of the

screen.

The menu options appears on the left side of the

screen.

2. Select [Edit] > [Divide] option.

Example: Title List (DVD+RW)

2. Use v / V to select [Combine] option.

The combine indicator appears between the two

chapters you want to combine.

Example: Title List (DVD-VR)

3. Press ENTER.

[Edit (Divide)] menu appears.

Current picture

3. Press ENTER to combine the chapters.

4. Repeat steps 1 - 3 to continue to combine from

the menu.

The first title’s

thumbnail

5. Press RETURN (O) repeatedly to exit the menu.

Notes:

This function cannot operate listed as below;

The second

title’s thumbnail

•

If there is only one chapter within the title.

If you select first chapter.

If two chapters created by erasing a part from an

original title.

4. Use play, pause step, search and slow-motion to

find the point you want to divide the title.

•

If two chapters created from different titles.

If two chapters created by moving an order from an

original title.

5. Select [Divide] option then press ENTER at the

point.

To reset the point, select [Cancel] option then

press ENTER. Repeat from step 4.

6. Choose [Done] option then press ENTER to fix

the dividing point.

The title is divided into two new titles. It take up to

4 minutes to divide.

Note:

The diving point may not be selected if the point is

less than 3 seconds long.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. On DVD mode, press TITLE in Play mode or Stop

mode.

Title List menu will appear as shown below.

Overwriting Recording +RW

To overwrite a new video recording on a previously

recorded title, follow these steps. This feature is not

available for DVD+Rs, that always record at the end

of the Disc.

1. Select input source you want to record

(AV1-2).

2. Press DISC MENU/LIST to display the TITLE

LIST menu.

3. To play back a title, select the title you want then

press ENTER or PLAY (N).

Tip:

You can remove the Title List menu by pressing

STOP (x).

Playing Your Recordings on

Other DVD Players

(Finalizing a Disc)

3. Use v V b B to choose a title you want to

overwrite.

4. Press z REC to start overwrite recording.

Overwrite recording starts from the start point of

the title.

Most regular DVD players can play finalized discs

recorded in Video mode, finalized DVD+R or

DVD+RWs. A small number of players can also play

DVD-RW discs recorded in VR mode, finalized or not.

Check the manual that came with the other player to

check what formats of discs it will play.

5. Press STOP (x) to stop the overwrite recording.

The new title is created and updated menu is dis-

played.

Notes:

•

This function is not available for a protected title.

•

If the overwrite is longer than the recording

length of the current title, the next title is over-

written. But if next title is protected, the over-

writing stops at the starting point of the title.

Finalizing ‘fixes’ the recordings and editings in place

so that the disc can be played on a regular DVD play-

er or computer equipped with a suitable DVD-ROM

drive.

Finalizing a Video mode disc creates a menu screen

for navigating the disc. The menu can be accessed

by pressing DISC MENU/LIST or TITLE.

•

If the selected title’s recording length is less than

10 seconds, the next title is overwritten. But if the

next title is protected, overwriting stops.

To finalize a disc, refer to [Finalize] on page 17.

Notes:

•

Unfinalized DVD+RW is playable on regular DVD

players.

Viewing Title List menu

displayed on other DVD

Recorders or Players

•

The edited contents of a DVD+RW disc is com-

patible on regular DVD players only after

finalization.

•

Any edited contents of the DVD+R disc are not

compatible on regular DVD players.

(Hide, chapter combine, added chapter mark, etc.)

+RW

You can view the Title List menu displayed on the

other DVD player that is capable of playing DVD+RW

or DVD+R discs.

How long finalization takes depends on the type

of disc, how much is recorded on the disc, and

the number of titles on the disc.

1. Insert DVD+R or DVD+RW disc recorded already.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Language Code List

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Language

Abkhazian

Afar

Afrikaans

Albanian

Ameharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Code

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Language

Fiji

Finnish

French

Frisian

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Hausa

Code

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Language

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Code

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

Language

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Turkish

Turkmen

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapük

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Code

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Marathi

Moldavian

Mongolian

Nauru

Bengali; Bangla

Bhutani

Bihari

Hebrew

Hindi

Nepali

Norwegian

Oriya

Panjabi

Pashto, Pushto

Persian

Polish

Portuguese

Quechua

Rhaeto-Romance 8277

Rumanian

Russian

Samoan

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Shona

Sindhi

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Italian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

8279

8285

8377

8365

7168

8382

8372

8378

8368

Korean

Kurdish

Laothian

Latin

Latvian, Lettish

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

ꢀThe power cord is disconnected.

ꢀPlug the power cord into the wall out-

let securely.

Abnormal or no picture.

ꢀThe TV is not set to receive Recorder

signal output.

ꢀSelect the appropriate video input

mode on the TV so the picture from

the Recorder appears on the TV

screen.

ꢀConnect the video cable into the jacks

securely.

ꢀThe video cable is not connected

securely.

ꢀ Check TV capability.

ꢀ Unit output setting and TV resolution

capabilities mismatch.

ꢀ Check mode of connections

(eg. S-Video, Components etc.).

ꢀ Check unit Resolution setting accord-

ing to TV capability and mode of con-

nection.

ꢀCheck the connection.

ꢀWrong connection.

ꢀSelect the correct input mode of the

audio receiver so you can listen to the

sound from the Recorder.

ꢀThe equipment connected with the

audio cable is not set to receive

Recorder signal output.

No sound.

ꢀConnect the audio cable into the jacks

securely.

ꢀThe audio cables are not connected

securely.

ꢀTurn on the equipment connected with

the audio cable.

ꢀThe power of the equipment connected

with the audio cable is turned off.

ꢀSet the AUDIO options to the correct

position.

ꢀThe AUDIO options are set to the wrong

position.

ꢀ Change AUDIO setup to PCM mode.

ꢀ In HDMI mode, audio selection is not

set to PCM.

ꢀClean the disc.

ꢀThe disc is dirty.

The playback picture is

poor.

ꢀClean video heads.

ꢀTape heads are dirty.

ꢀUse TRACKING (+ / -) for manual

tracking adjustment while tape is

playing.

ꢀTape is a rental or was recorded on

another VCR.

ꢀ You cannot connect via the Recorder.

Connect the component directly to

your TV.

ꢀ The video signal from the external

component is copy-protected.

Picture from external

input is distorted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cause

ꢀ No disc is inserted.

Correction

Symptom

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The Recorder does not

start playback.

ꢀ No tape is inserted.

ꢀ An unplayable disc is inserted.

ꢀ The disc is placed upside down.

ꢀ Insert a playable disc. (Check the disc

type and Regional code.)

ꢀ Place the disc with the playback side

down.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ The disc is not placed within the

guide.

ꢀ Clean the disc.

ꢀ The disc is dirty.

Video tape cannot be

inserted.

ꢀ Eject the tape first and then insert the

tape you want to use.

ꢀ A cassette tape was inside already.

The Remote Control

does not work properly.

ꢀ There is an obstacle in the path of the ꢀ Remove the obstacle.

Remote Control and this unit.

ꢀ The batteries in the Remote Control

are exhausted.

ꢀ Replace the batteries with new ones.

ꢀ The Remote Control is not pointed at

the remote sensor of the Recorder.

ꢀ Point the Remote Control at the remote

sensor of the Recorder.

ꢀ The Remote Control is too far from

the Recorder.

ꢀ Operate the Remote Control within

23ft (7m).

ꢀ This Remote Control use the same

buttons for VCR and DVD functions

(ex.PLAY).

ꢀ When using a VCR, first press the VCR

button. When using a DVD, first press

the DVD button.

ꢀ The current remote control code dose ꢀ Identify the remote control code with

not match the unit.

the code of unit (See page 8).

Camcorder image is

not shown.

ꢀ Camcorder is off.

ꢀ Turn camcorder on and operate

properly.

Camcorder image via

A/V input or DV IN to

Recorder is not shown

on TV screen.

ꢀ The recorder’s source is incorrect.

ꢀ Use AUX to select input channel (AV1,

AV2 or DV IN).

Timer recording is not

possible.

ꢀ Clock in record is not set to

correct time.

ꢀ Set clock to correct time.

ꢀ Reprogram Timer.

ꢀ Timer has been programmed

incorrectly.

ꢀ Reprogram Timer and turn the

Recorder off to enable timer.

ꢀ

(TIMER Record) indicator light does

not appear after programming timer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cause

Correction

Symptom

ꢀ The disc was recorded in Video mode. ꢀ Finalize the disc; see page 18.

Can’t play disc recorded

on this Recorder on

another DVD player.

ꢀ Some players will not play even a

finalized disc recorded in Video mode.

ꢀ No solution.

ꢀ The disc was recorded in VR mode.

ꢀ The other player must be RW

compatible in order to play it.

ꢀ Discs recorded with copy-once materi- ꢀ No solution.

al cannot be played on other players.

ꢀ The remaining blank space on the

disc is insufficient.

ꢀ Use another disc.

Cannot record or did

not record successfully.

ꢀ The source you are trying to record is ꢀ You cannot record the source.

copy-protected.

ꢀ When recording to a Video mode disc, ꢀ Use a VR mode formatted disc for

programs that are copy-once protect-

ed cannot be recorded.

copy-once material.

Stereo Audio Record

and/or Playback not

present.

ꢀ TV is not Stereo-compatible.

ꢀ No solution.

ꢀ Recorder A/V Out jacks are not

connected to TV A/V In jacks.

ꢀ Make A/V connections. Stereo is avail-

able only via A/V output from Recorder.

ꢀ Recorder Audio/Video Out is not

selected for viewing at the TV.

ꢀ Select AUX or A/V source as TV input.

You can reset the Recorder as follows:

Resetting the Recorder

•

Press and hold the STANDBY/ON button for

more than five seconds. This will force the

Recorder to power off.

If you observe any of the following symptoms...

•

When the Recorder is plugged in, but the

power will not turn on or off.

Press the STANDBY/ON button again to turn

the Recorder back on.

•

When the display window is not working.

•

Unplug the power cord and then plug the

power cord again after more than five sec-

onds.

When the Recorder does not operate

normally.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

AC 120V, 60 Hz

Power consumption

Dimensions (approx.)

Net Weight (approx.)

Operating temperature

Operating humidity

Signal system

23W

430 X 80 X 260 mm (16.9 x 3.1 x 10.2 inches) (w x h x d)

4.19 kg (9.2 lbs)

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

NTSC

Recording

Recording format

Recordable discs

Recordable time

DVD VideoRecording, DVD-VIDEO

DVD+/-Recordable; DVD+/-Rewritable, DVD-Random Access Memory

DVD; Approx. 1 hour 20 minutes (XP mode), 2 hours (SP mode),

4 hours (LP mode), 6 hours (EP mode)

VCR; SP: 2 hours (T-120), SLP: 6 hours (T-120)/8 hours (T-160)

Video recording format

Sampling frequency

27MHz

Compression format

MPEG 2 (VBR support)

Audio recording format

Sampling frequency

48kHz

Compression format

Dolby Digital

VCR Specifications

Head system

Four head helical scan azimuth system

Timer

12-hour display type with AM, PM

Tape speed

SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec

Tape width

12.7 mm

Rewind time

About 180 seconds (T-120)

Frequency range

Signal-to-noise ratio

Dynamic range

Channel separation

20Hz to 20kHz

43dB

88 dB

60 dB

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Specifications

Laser system

Semiconductor laser, wavelength 650 nm

DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz

More than 95dB

Frequency response

Signal-to-noise ratio

Harmonic distortion

Dynamic range

Less than 0.008%

More than 90 dB

Inputs

VIDEO IN (AV1,2)

AUDIO IN (AV1,2)

DV IN

1.0 Vp-p 75 ohms, sync negative, RCA jack x 2

- 6.0 dBm more than 47 kohms, RCA jack (L, R) x 2

4 pin (IEEE 1394 standard)

Outputs

VIDEO OUTPUT

1 Vp-p 75 Ω, sync negative, RCA jack x 1

(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1

S-VIDEO OUTPUT

COMPONENT OUTPUT

(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1

(PB)/(PR) 0.7 V (p-p), 75 Ω, RCA jack x 2

19 pin (HDMI standard, Type A)

HDMI video/audio output

Audio output (digital audio)

Audio output (optical audio)

Audio output (analog audio)

0.5 V (p-p), 75 Ω, RCA jack x 1

Optical connector x 1

1 kHz, -6 dBm, 600 Ω, RCA jack (L, R) x 2

Accessory:

Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .1

Audio cable (L, R) . . . . . . . . . . . . . . . .1

Batteries . . . . . . . . . . . . . . . . . . . . . . .2

Design and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Numerics

16:9 15

4:3 Letter Box 15

4:3 Pan Scan 15

3D Surround 23

EP mode 17, 28, 46

Random 24

Rear Panel 9

REC 7

REC MODE 7

Record mode

DVD 17

Recordable time 46

Recording

DVD 28

Recording Settings 17

Regional code 4

Remote Control 7

Rotate 26

Factory Set 15

Fast forwards 20

FORWARD 20, 21

Frame-by-Frame 21

Front Panel 6

Full Play 34

Angle 23

AUDIO 7, 20, 22

Audio Settings 16

Auto Chapter 17

AV IN 2 6

Full Screen 26

General Settings 15

BACKWARD 20, 21

Sampling Freq. 15

Time Search 38

Marker Search 23

Setup 14

Show 34, 39

Slide Show 27

Sound 19

SP mode 17, 28, 46

STOP 7

SUBTITLE 7, 21

Hide 34, 39

Home Menu 14

Chapter List 34, 35

Cleaning Discs 2

CLEAR 7, 20

Clock Set 15

Combine 34, 40

Connection

Video 10

Audio 12

HDMI 11

Component 10

S-Video 10

Amplifier 12

Recorder 13

Digital Camcorder 13

Counter 20

CPRM 5

Initial Setup Wizard 14

Initialize 17

INPUT 7

INPUT 1 9

Instant Timer Recording 29

JPEG 26

Timer Record 31

Timer Record List 31

Title 19, 21

Title Name 34, 38

Tracking 7, 20

Troubleshooting 43-45

TV Aspect 15

Language Settings 16

Last Scene Memory 23

LP mode 17, 28, 46

Delete 34, 37

Deleting a Part 37

DIGITAL AUDIO OUTPUT 9

Disc Information 19

Disc Label 18

Disc Menu 16

DISC MENU/LIST 21

Disc Protect 18

Disc Settings 17

DISPLAY 7

Display window 6

Divide 34, 40

Dolby Digital 16

DRC 17

DTS 16

Dubbing 32

MLP mode 17, 28, 46

Move 34, 39

MP3 25

Unfinalize 18

Unprotect 39

MPEG 16

Numerical buttons 7

Video Mode 3

VR Mode 3

On-Screen Display 19

OUTPUT 9

WMA 25

PAUSE 6, 7, 21

PLAY 6, 7,

PLAY MODE 7, 22

Playable Discs 3

Playback

XP mode 17, 28, 46

DV dubbing 33

DV Record Audio 17

DVD+R 3

ZOOM 7, 21

DVD 22-23

DVD+R DL 3

DVD+RW 3

DVD+R 3

Audio CD or MP3/WMA 25

JPEG 26-27

VCR 20

DVD-RAM 3

DVD-RW 3

Power cord G-2, 6

Power Save Mode 15

Protect 34, 39

Download from Www.Somanuals.com. All Manuals Search And Download.

WARRANTY (Only in U.S.A.)

Download from Www.Somanuals.com. All Manuals Search And Download.

FOR SERVICING (Only in U.S.A.)

0209SKMLGEEGL

Download from Www.Somanuals.com. All Manuals Search And Download.

Insignia GPS Receiver NS NAV01 User Manual
Intel Computer Hardware 32882 User Manual
JVC CRT Television AV 14F43 AV 20N43 AV 21D43 User Manual
JVC DVD Player TH S7 User Manual
JVC Speaker System SP XF30 User Manual
Karcher Pressure Washer HD 3000 User Manual
Kenmore Washer W10026670A User Manual
Kenwood Marine Radio TS 520S User Manual
Kettler Bicycle KT902 181 User Manual
Konica Minolta Digital Camera KD 200Z User Manual