DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XVC40B
HR-XVC41S
INSTRUCTIONS
LVT1948-002A
[C]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in elec-
tric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the follow-
ing procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
2. Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
11. Only use attachments/accessories specified
by the manufacturer.
3. Heed all warnings. - All warnings on the product
and in the operating instructions should be
adhered to.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this apparatus near water. - For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swim-
ming pool; and other areas located near water.
6. Clean only with dry cloth. - Unplug this product
from the wall outlet before cleaning. Do not use
liquid cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
-
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over-heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manu-
facturer’s instructions have been adhered to.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete
outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operations - VCR . . . . . . . . . . . . . .20-25
Introduction . . . . . . . . . . . . . . . . . . . . .5-9
Moisture Condensation . . . . . . . . . . . . . . . . . .5
Symbol Used in this Manual . . . . . . . . . . . . .5
VCR Tape Playback . . . . . . . . . . . . . . . . .20-21
Basic Instructions . . . . . . . . . . . . . . . . . . . . .20
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .20
Manual Tracking . . . . . . . . . . . . . . . . . . . . . .20
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Still Picture and Frame-by-Frame Playback .20
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .20
CM SKIP (Commercial Skip) . . . . . . . . . . . . .21
About the
Symbol Display . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5
About the Remote Control . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . .6
Regional code . . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8
About the Remote Control . . . . . . . . . . . . . . .8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
VHS Hi-Fi Stereo/MTS Broadcast . . . . . . . . .21
Hi-Fi Stereo Audio Sound . . . . . . . . . . . . . . .21
MTS (Multi-Channel TV Sound) . . . . . . . . . .21
VCR Tape Recording . . . . . . . . . . . . . . . .21-24
Basic Instructions . . . . . . . . . . . . . . . . . . . . .21
Timer Recording . . . . . . . . . . . . . . . . . . .22-23
Basic Recording (One-Touch Recording) . . . . . .24
Instant Timer Recording . . . . . . . . . . . . . . .24
Copying from DVD to VCR . . . . . . . . . . . . .25
On-Screen Display - VCR . . . . . . . . . . . . . . .25
Preparation . . . . . . . . . . . . . . . . . . .10-17
Connecting an Antenna or Cable TV . . . . . . .10
Basic TV Connections . . . . . . . . . . . . . . .10-11
Optional TV Connections . . . . . . . . . . . . . . .11
Connection to an amplifier . . . . . . . . . . . . . .12
Accessory Audio/Video (A/V)
Additional VCR Information . . . . . . . . . . . . .26
VCR Auto Play System . . . . . . . . . . . . . . . . .26
S-VHS Quasi Playback (SQPB) . . . . . . . . . .26
Easy Information . . . . . . . . . . . . . . . . . . . . .26
. . . . . . . . . . . . . . . . . . . .12
Connections to unit
Initial Settings - VCR . . . . . . . . . . . . . . . .13-14
General Operation . . . . . . . . . . . . . . . . . . . .13
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . .13
• Manual Clock Set . . . . . . . . . . . . . . . . . . .13
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . .13
TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• Auto Channel Programming . . . . . . . . . .14
• To Add or Erase Channels . . . . . . . . . . . .14
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• FUNCTION OSD . . . . . . . . . . . . . . . . . .14
• AUDIO MODE . . . . . . . . . . . . . . . . . . . . .14
• BROADCAST TYPE
Operations - DVD . . . . . . . . . . . . . .27-32
Playback Setup . . . . . . . . . . . . . . . . . . . . . . .27
General Features . . . . . . . . . . . . . . . . . . .27-28
Additional Features . . . . . . . . . . . . . . . . . . .28
Playing an Audio CD or MP3/WMA Disc . . .29
Programmed Playback . . . . . . . . . . . . . . . .29
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . .30
Playing a DivX Movie file . . . . . . . . . . . . . . . .31
Playing a DVD VR format Disc . . . . . . . . . . .32
Maintenance and Service . . . . . . . . . . . . . . .32
(STEREO/SAP/MONO) . . . . . . . . . . . . . .14
• AUDIO OUTPUT
Reference . . . . . . . . . . . . . . . . . . . .33-36
(STEREO/LEFT/RIGHT) . . . . . . . . . . . . .14
Displaying Disc Information on-screen . . . .15
Language Codes List . . . . . . . . . . . . . . . . . .33
Area Codes List . . . . . . . . . . . . . . . . . . . . . . .33
Troubleshooting . . . . . . . . . . . . . . . . . . .34-35
Initial Settings - DVD . . . . . . . . . . . . . . . .15-18
General Operation . . . . . . . . . . . . . . . . . . . .15
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .16
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .16
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
LOCK (Parental Control) . . . . . . . . . . . . . . .17
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Remote Control Function . . . . . . . . . . . . .15-18
Specifications . . . . . . . . . . . . . . . . . . . . . . . .36
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
About the
Symbol Display
“
” may appear on your TV display during opera-
tion and indicates that the function is not permitted by
this unit or the disc.
This manual provides information on the operation
and maintenance of your unit. Should the unit require
service, contact an authorized service location.
Notes on Discs
Handling Discs
Moisture Condensation
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Never operate the unit immediately after moving it
from a cold location to a warm location. Leave it
unplugged for two or three hours without operating it.
If you use the unit in such a situation, it may damage
discs/tapes and internal parts.
Symbol Used in this Manual
Note:
Indicates special notes and operating fea-
tures.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Tip:
Indicates tips and hints for making the task
easier.
Cleaning Discs
A section whose title has one of the following
symbols is applicable only to the disc represented
by the symbol.
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
ALL
DVD
VCD
ACD
MP3
WMA
DivX
All discs listed below
DVD and finalized DVD±R/RW
Video CDs
Audio CDs
MP3 files
WMA files
DivX files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled as
the same as the rear of the unit or “ALL”.
DVD
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
1 2
3 4
ALL
1 2
1
Audio CD
(8 cm / 12 cm disc)
Notes on Regional Codes
In addition, this unit plays DVD±R/RW and CD-R/RW
that contains audio titles, MP3, WMA, DivX and/or
JPEG files.
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This num-
ber must match your DVD player’s regional code or
the disc cannot play.
This indicates a product feature that is capa-
ble of playing DVD-RW discs recorded with
Video Recording format.
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
Notes:
Notes on Copyrights:
•
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyright-
ed material without permission. This product features
the copy protection function developed by
•
•
Only plays if DVD-RW is recorded in Video mode
and has been finalized.
Macrovision. Copy protection signals are recorded on
some discs. When recording and playing the pictures
of these discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intend-
ed for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
• This DVD+VCR requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards.
There are many different types of recordable disc
formats (including CD-R containing MP3 or WMA
files) and these require certain pre-existing condi-
tions (see above) to ensure compatible playback.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Notice for Progressive Scan Use
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 525p UNIT
RECORDER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
CH
a
b
c
d
Disc Tray (DVD deck)
Insert a disc here.
h
PAUSE (X)
Pause playback or recording. Press repeatedly for
frame-by-frame playback.
Cassette Compartment (VCR deck)
Insert a video cassette here.
i
j
k
l
m
n
OPEN/CLOSE (Z)
Opens or closes the disc tray.
POWER 1/:
Switches the unit ON and OFF.
Display Windows
Refer to below for details.
REW (m)
- DVD: Skip to beginning of current chapter or track,
press twice in quick successions to go to previous
chapter or track. Press and hold button for about two
seconds to search backward.
Remote Sensor
Point the unit Remote Control here.
EJECT (Z)
Ejects the tape in the VCR deck.
- VCR: Rewinds the tape during the stop mode or for
fast reverse picture search.
CH (-/+)
To scan up or down through memorized channels.
e
f
PLAY (N)
Starts playback of a disc or tape.
REC (z)
To record normally or to activate One-touch Timer
Recordping by repeated presses.
FF (M)
- DVD: Skip to next chapter or track. Press and hold
for two seconds for a fast forward search.
- VCR: Advances the tape during the STOP mode or
for fast forward picture search.
Press REC (z) for more than 3 seconds to set the
unit to standby mode for Timer-Link recording.
o
p
VCR/DVD (output select)
Select one of your output sources to view on the TV
screen between DVD and VCR.
g
STOP (x)
Stops playback of the disc or tape.
LINE2 (VIDEO/AUDIO (L/R) input)
Connect to the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
Display Windows
The DVD deck is selected.
A cassette is in the VCR deck.
DVD
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
The VCR deck is selected.
VCR
REC
PM
The unit is Recording. (VCR part only)
Indicates PM time. (AM is not displayed.)
Lights when TV mode is active.
Indicates when the Progressive scan is active.
Indicates repeat mode.
[P]
TV
Indicates total playing time, elapsed time,
remaining time or current deck status
(Playback, Pause, etc).
The unit is in timer recording or a timer recording
is programmed (VCR part only).
This indicator will flash when the unit is set to
standby mode for Timer-Link recording.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DISC MENU : Accesses menu on a DVD disc.
b / B / v / V : Selects menu options.
CH (-/+) : Selects VCR channels.
SETUP MENU : Accesses or removes DVD Setup menu
and VCR menu.
ENTER (OK) : Confirms menu selections. Displays func-
tions on the TV screen.
a
RETURN (O) : Removes the setup menu.
ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ
X (PAUSE) :
Pause playback or recording temporarily.
Press repeatedly for frame-by-frame playback.
./> (SKIP) (DVD only):
Go to next the chapter or track.
Returns to beginning of current chapter or track or go to
previous chapter or track.
b
c
x (STOP) : Stops playback or recording.
m (REW) / M (FF):
- DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape during the STOP mode,
for fast backward/forward picture search.
N (PLAY) : Starts playback.
0-9 Selects numbered options in a menu.
PROGRAM : Shows or hides Program menu.
CLEAR (0000) : Removes a mark on the Marker Search
menu.
ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ
A.MONITOR : Selects an audio language (DVD).
SUBTITLE : Selects a subtitle language.
ANGLE : Selects a DVD camera angle, if available.
ZOOM : Enlarges DVD video image.
MARKER : Marks any point during playback.
SEARCH : Displays Marker Search menu.
TITLE : Displays the disc’s Title menu, if available.
z (REC) : Starts recording.
ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ
1/I (POWER) : Switches unit ON and OFF.
TV/VCR : To view channels selected by the VCR tuner or
by the TV tuner
REPEAT : Repeat chapter, track, title or all.
RANDOM : Plays tracks in random order.
Z (OPEN/CLOSE, EJECT) : Opens and closes the disc
tray. Ejects the tape in the VCR deck.
DVD : Select the unit function mode to DVD.
VCR : Select the unit function mode to VCR.
AUX : Selects the VCR deck’s source (LINE 1 or LINE 2).
: Fast forwards picture search through 30 seconds of
recording.
REPEAT A-B : Repeats sequence between two points (A
and B).
DISPLAY : Accesses On-Screen Display.
Switches between the clock, tape counter and tape
remaining modes on the display.
SPEED : Selects recording speed. Shows tape playing
speed.
About the Remote Control
Battery installation
Detach the battery cover on the rear of
the Remote Control, and insert two
(R03/AAA) size batteries with 3 and #
aligned correctly.
Operation Range
Point the Remote Control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Do not mix old and new batteries and never
mix different types of batteries such as
standard, alkaline, etc.
Angle:
About 30° in each direction of the front of
the remote sensor.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
Caution
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
a
b c d e
f
g
h
i
a
b
ANT.IN
Connect the VHF/UHF/CATV antenna to this terminal.
f
g
h
AC Power Cord
Plug into the power source.
VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
RF. OUT
Connect to a TV with RF coaxial inputs.
COAXIAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (coaxial) audio equipment.
c
d
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
i
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
e
AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV or other equipment with audio inputs.
Preparation
Depending on your TV and other equipment there are various ways you can connect the
player. Please refer to the manuals of your TV, VCR, stereo system or other devices as nec-
essary for additional connection information.
Notes:
•
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units
away from each other or turn off the unit after removing the disc.
•
•
Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.
Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection
system.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
To view or record a CATV channel
Connecting an Antenna
or Cable TV
1
2
3
Tune the TV to the DVD+VCR output channel
(CH 3 or 4).
Set the DVD+VCR channel selector to the cable
output channel. (Example: CH3)
a
Antenna:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your DVD+VCR. If your antenna cable is
flat connect it to a 300-ohm to 75-ohm antenna adap-
tor (not supplied) and slip the adaptor over the
ANT.IN jack. Don’t attempt to screw it into to the
DVD+VCR.
Select a channel using the cable converter.
Notes:
•
With this connection, you cannot record one pro-
gram while viewing another.
•
If you are using a cable box to tune channels, it is
not necessary to do Auto Channel Set.
b
If your cable connection has no converter or
Cable TV:
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the DVD+VCR. If a
converter is required connect a coaxial cable from the
wall jack to the IN connector on the converter, and a
coaxial cable from the OUT connector on the convert-
er to the ANT.IN on your DVD+VCR. This cable
hookup permits both TV and DVD+VCR operation.
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Rear of TV
ANTENNA
INPUT
VIDEO
INPUT
AUDIO INPUT
R
L
a
Antenna
Antenna
R
V
A1
Rear of DVD+VCR
OR
OR
C
A2
S
Rear of DVD+VCR
b
Y
Pr
Pb
R
L
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
AUDIO INPUT
S-VIDEO
INPUT
Rear of TV
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set the DVD+VCR’s RF output channel
Optional TV Connections
These connections support only DVD playback. The
tuner and VCR still output through the RF.OUT (R) or
DVD/VCR OUT (A, V) jacks.
1. When the DVD+VCR is turned off, press and hold
CH (+/-) on the front panel for more than five sec-
onds. “RF03” or “RF04” appears in the display
window.
2. Press CH (+/-) to change the RF output channel
(RF03 or RF04). Tune the TV to this channel.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD Player
to the S-Video in jack on the TV using the S-Video
cable (S).
3. Turn off the DVD+VCR.
Audio/Video connection
Component Video / Progressive Scan
connection
1. Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using
the video cable supplied (V).
If your television is a high-definition or “digital ready”
television, you may take advantage of the
DVD+VCR’s progressive scan output for the highest
video resolution possible.
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the DVD+VCR to the audio left/right
in jacks on the TV (A1) using the supplied audio
cables.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD+VCR to the corre-
sponding in jacks on the TV using an optional Y Pb
Pr cable (C).
Note:
If you use this connection, set the TV’s source selec-
tor to VIDEO.
Notes:
•
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack and
S-VIDEO OUT jack).
•
•
When you use Component Video signal, set the
Progressive Scan to “Off” on the setup menu.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled.
Audio connection
Connect the Left and Right AUDIO OUT jacks of the
DVD+VCR to the audio left/right in jacks on the TV
using the supplied audio cables (A2).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Amplifier
Rear of DVD+VCR
You can only listen to DVD playback using COAXIAL
(X) and AUDIO OUT (A2) connections. The VCR will
still be heard through the DVD/VCR AUDIO OUT (A1)
jack.
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
A1
A2
X
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the unit to the audio
left and right in jacks on your amplifier, receiver, or
stereo system using the audio cables (A1, A2)
supplied.
R
L
COAXIAL
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
Connecting to an amplifier equipped with two chan-
nel digital stereo (PCM) or to an Audio/Video receiv-
er equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2, or DTS)
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are registered trademarks of Dolby
Laboratories.
1. Connect one of the unit’s DIGITAL AUDIO OUT
jacks (COAXIAL X) to the corresponding jack on
your amplifier. Use an optional digital (COAXIAL
X) audio cable.
“DTS” and “DTS Digital Out” are registered
trademarks of DTS, Inc.
2. You will need to activate the unit’s digital output.
(See “AUDIO” on page 17).
Digital Multi-channel sound
Accessory Audio/Video (A/V)
Connections to unit
Connect the VCR IN LINE 1 or LINE 2 jacks on the
unit to the audio/video out jacks on your accessory
component, using the optional audio/video cables.
(Refer to page 24 for “Basic Recording”.)
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Caution
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Notes:
•
If the audio format of the digital output does not
match the capabilities of your receiver, the receiv-
er will produce a strong, distorted sound or no
sound at all.
•
•
Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
To see the audio format of the current DVD in the
on-screen display, press A.MONITOR.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
• AUTO CLOCK SET
Initial Settings - VCR
The Auto Clock Set feature is set to ON at the fac-
tory. In the ON setting, the DVD+VCR looks for a
channel carrying XDS (Extended Data Services)
information. XDS updates the clock using the
Coordinated Universal Time.
By using the VCR Setup menu, you can make
various adjustments to items such as clock setting,
and timer recordings.
- Use b / B to choose ON or OFF.
Your DVD+VCR allows remote control adjustment of
several features.
• DAYLIGHT SAVINGS
You can turn Daylight Savings On or Off manually.
If you choose “AUTO”, the DVD+VCR sets the
clock using the DST information broadcast in the
signal (channel).
General Operation
1. Press VCR on the remote control.
- Use b / B to choose AUTO, ON or OFF.
2. Press SETUP MENU and the MAIN menu will
appear.
• TIME ZONE
You can set your local Time Zone manually. If you
choose “AUTO”, the DVD+VCR sets the clock
using the first Coordinated Universal Time informa-
tion it finds in a broadcast signal.
- Use b / B to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
PACIFIC, ALASKA or HAWAII).
Notes:
•
The Auto Clock feature enables the DVD+VCR to
set up the clock while the DVD+VCR is turned off.
3. Use v / V to select the desired menu, then press
ENTER (OK).
•
There are cases where the TV station does not
send or sends wrong date and/or time information
and the DVD+VCR sets the incorrect time. If this
happens we recommend that you set the clock
manually.
4. Use v / V to choose a desired option on the seleted
Menu. Then use b / B to choose a desired setting.
5. Press SETUP MENU when finished.
Manual Clock Set
Note:
Menus remain on-screen for 3 minutes.
Use v / V / b / B to enter the necessary information.
•
•
MONTH : Choose the month.
DAY : Choose the date.
The day of the week will display automatically.
• YEAR : Choose the year.
CLOCK
• TIME : Choose the time.
Press and hold b / B to advance clock continuously.
The DVD+VCR gives you two ways to set the time
and date: the Auto Clock Feature or Manually.
Notes:
Auto Clock Set
•
If setting the clock manually, “AUTO CLOCK SET”
must set to “OFF”. If it is set to “ON”, an incorrect
date and/or time will be entered again when the
DVD+VCR is turned off.
•
The clock uses the 12-hour system. Be sure to
set AM and PM correctly.
PROGRAM
The Timer Recording function allows you to record up
to 8 programs within a period of one year. (See pages
22-25).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING
SETUP
This DVD+VCR is equipped with a frequency synthe-
sized tuner capable of receiving up to 181 channels.
These include VHF channels 2-13, UHF channels
14-69 and CATV channels 1-125.
Auto Channel Programming
FUNCTION OSD
The on-screen display can be turned on or off.
AUDIO MODE
The DVD+VCR has two separate audio playback sys-
tems, the high quality VHS Hi-Fi system and standard
NORMAL mono system. The same audio is generally
recorded on both systems. The VHS Hi-Fi system
plays on separate (left and right) channels, and the
NORMAL system plays monaural sound. The normal
track is always played so the cassette can be played
on a DVD+VCR that does not have VHS Hi-Fi.
1. Choose the SOURCE SELECT option, then use
b / B to select TUNER.
Use b / B to switch among TUNER, LINE1, and
LINE2.
2. Choose the AUTO CHANNEL SET option, then
use b / B to find channels.
• The tuner will automatically cycle through all
available channels (TV/CATV) in the area and
place them in the tuner’s memory.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo
and/or Second Audio Program (SAP) bilingual sig-
nals. Set this display to the desired position when
both MTS stereo and SAP signals are received.
When only one of the MTS signal is received, the
DVD+VCR automatically selects the corresponding
receiving mode (Stereo or SAP) regardless of the
selected position. For normal operation, the display
should be in the STEREO position. The DVD+VCR
will then record a STEREO program when available,
and record a mono program IF the program is NOT
IN STEREO. For weak STEREO and/or SAP broad-
casts, changing the display to mono may give clearer
sound.
• After the AUTO CHANNEL SET is complete, the
TUNING menu will hide and return to the TV
screen automatically.
3. Make sure the TUNING BAND is set appropriately
(TV or CATV).
• TV : If you are using a standard antenna to
receive channels.
• CATV : If you are using basic cable to receive
channels.
To Add or Erase Channels
This feature allows you to add or erase channels
from memory manually.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-
FI/NORMAL) is in HI-FI position] for selecting the
audio output signals from the AUDIO OUT terminals
(L ch and R ch), and RF.OUT. This display setting
should normally be left in the stereo position, so that
when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a
mono tape is played and the audio output is set to
stereo, the same mono sound will be heard from both
left and right channels.
1. Choose the CH. ADD/DEL option, then use b / B
to select a channel to add or erase.
2. Use ENTER (OK) to add or erase the channel.
Repeat steps 1 and 2 to add or erase other
channels.
3. Press SETUP MENU to return to the TV screen.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Disc Information
on-screen - DVD
Initial Settings - DVD
By using the DVD Setup menu, you can make vari-
ous adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 16 to 18.
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback infor-
mation.
To display and exit the Menu:
The items displayed differ depending on the disc
type or playing status.
Press SETUP MENU to display the menu. A second
press of SETUP MENU will take you back to initial
screen.
1 / 3
1 / 12
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
0:20:09
ABC
1 ENG
General Operation
1 / 1
1. Press DVD on the remote control.
3D SUR
2. Press SETUP MENU. The Setup menu appears.
3. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well
as alternate setting(s).
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
ꢀ Title (Track) – Current title (or track).
number/total number of titles (or tracks).
ꢀ Chapter – Current chapter number/total number
of chapters.
4. Use v / V to select the second desired option
then press B to move to the third level.
ꢀ Time – Elapsed playing time.
5. Use v / V to select the desired setting then press
ENTER (OK) to confirm your selection. Some
items require additional steps.
ꢀ Audio – Selected audio language or channel.
ꢀ Subtitle – Selected subtitle.
ꢀ Angle – Selected angle/total number of angles.
ꢀ Sound – Selected sound mode.
6. Press SETUP MENU or N (PLAY) to exit the
Setup menu.
Note:
If no button is pressed for a few seconds, the on-
screen display disappears.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive Scan
LANGUAGE
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for con-
nection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn on progressive scan:
Connect component/progressive out of this unit to the
input of your monitor/television, set your television or
monitor to component/progressive Input.
Menu Language
Select a language for the VCR and DVD’s setup
menu and information display.
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
Disc Audio / Subtitle / Menu
2. Select “On” using the v / V buttons.
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
3. Pressing ENTER/OK will set this unit to progres-
sive scan mode.
Original: Refers to the original language in which the
disc was recorded.
Note:
Other: To select another language, press number
buttons then ENTER (OK) to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 33). If you enter the
wrong language code, press CLEAR (0000).
If you set Progressive Scan to ON in error, you must
reset the DVD+VCR. Press x (STOP) and hold it for
more then five seconds before releasing it. The video
output will be restored to the standard setting, and a
picture will once again be visible on a conventional
analog TV or monitor.
Off (for Disc Subtitle) : Turn off Subtitle.
DISPLAY
TV Aspect
4:3 :
Select when a standard 4:3 TV is connected.
16:9 : Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not
fit.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO
LOCK (Parental Control)
Each DVD disc has a variety of audio output options.
Set this unit’s AUDIO options according to the type of
audio system you use.
Rating
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the complete
disc or to certain scenes on the disc. Movies and
scenes are rated from 1 to 8, depending on the area.
DVD video discs may or may not respond to the
parental control setting if the Area code of the disc is
set wrongly. Some discs offer more suitable scenes as
an alternative. Ratings are area dependent.
Dolby Digital / DTS / MPEG
Bitstream: Select “Bitstream” if you connect the
DVD+VCR’s DIGITAL AUDIO OUT jack to an
amplifier or other equipment with a Dolby Digital,
DTS or MPEG decoder.
PCM (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifi-
er. DVDs encoded in Dolby Digital or MPEG will
be automatically downmixed to two-channel PCM
audio.
The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
Off (for DTS): If you select “Off”, the DTS signal
is not output through the DIGITAL AUDIO OUT
jack.
1. Select “Rating” on the LOCK menu then press B.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code
you created.
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of han-
dling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If you have not yet entered a security code you are
prompted to do so. Input a 4-digit code and press
ENTER (OK). Enter it again and press ENTER
(OK) to verify. If you make a mistake before press-
ing ENTER (OK), press CLEAR (0000).
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is
made, this unit passes each type of signal through
without any further processing.
3. Select a rating from 1 to 8 using the v / V buttons.
1-8: Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
Check the documentation for your amplifier to verify
its capabilities.
Unlock : If you select unlock, parental control is
not active and the disc plays in full.
DRC (Dynamic Range Control)
Note:
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative
is found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presen-
tation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without los-
ing clarity of sound. Set DRC to On for this effect.
Vocal
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press ENTER (OK) to confirm your rating selec-
tion, then press SETUP MENU to exit the menu.
5. Press Z (OPEN/CLOSE) to activate parental
control.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Password (Security Code)
Off: Video CDs with PBC are played the same
way as Audio CDs.
You can enter or change password.
1. Select “Password” on the LOCK menu then press
B.
Auto Play
You can set up the DVD+VCR so a DVD disc auto-
matically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
2. Follow step 2 as shown previous page (Rating).
To change the password, select the “Change”,
press ENTER (OK) and input the new 4-digit code
then press ENTER (OK). Input it again to verify.
3. Press SETUP MENU to exit the menu.
On: Auto Play function is active.
If you forget your Security Code
Off: Auto Play function is not active.
If you forget your security code you can clear it using
the following steps:
Note:
The Auto Play function may not work for some DVDs.
1. Press SETUP MENU to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set
your preference and monitor’s ability.
3. Enter a new code as described above.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Area Code
Enter the Area Code whose standards were used to
rate the DVD video disc, based on the list in the
reference chapter (see page 33).
DivX(R) VOD
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more infor-
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow step 2 as shown previous page (Rating).
3. Select the first character using v / V buttons.
1. Select “DivX(R) VOD” option then press B.
4. Press B and select the second character using
v / V buttons.
2. Press ENTER (OK) while “Select” is selected and
the registration code will appear.
5. Press ENTER (OK) to confirm your area code
selection.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
download the video onto a disc for playback on
this unit.
OTHERS
3. Press ENTER (OK) to exit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Function
Remote Control A/B/C Code Switching
The remote control is capable of controlling three
JVC video units independently. Each of the units can
respond to one of three codes (A, B or C). The
remote control is preset to send C code signals
because your unit is initially set to respond to C code
signals. You can easily modify your unit to respond to
A or B code signals.
1/ I
B
ENTER
1-3
x
•
Keep pressing ENTER (OK) down during step 1.
1. Press the number Key “1” for A, “2” for B or
“3” for C to change the remote control code.
2. Ensure the unit in VCR mode, and then turn off
the power.
3. Press B on the unit for over 5 seconds while the
unit is turned off. The code currently set appears
on the front display panel.
4. Press x (STOP) on the remote control to change
the unit's code. The code currently set on the
remote control blinks on the front display panel for
approximately 5 seconds, and is applied to the
unit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This chapter describes how to operate the VCR and
DVD.
Search
This function lets you visually search for a tape sec-
tion in either direction: forward and backward. During
the high-speed picture search modes, the audio is
muted and horizontal lines (noise bars) appear. Also,
a short time is needed to stabilize the tape speed
when re-entering the PLAY mode so slight interfer-
ence may be observed during this time.
VCR Tape Playback
Press the VCR button to select the device to be
operated.
Basic Instructions
To search:
1. Turn on the TV.
1. Press m (REW) or M (FF) during playback.
Press and hold m (REW) or M (FF) during
tape fast winding.
2. Tune the TV to the DVD+VCR output channel
(CH 3 or 4) or if a direct VIDEO/AUDIO
connection is made between the DVD+VCR and
the TV, set the TV’s source selector to VIDEO.
2. To return to playback, press N (PLAY).
Note:
3. Insert a pre-recorded video cassette.
After 3 minutes in SEARCH mode the unit returns to PLAY
mode to protect the tape and video heads.
The indicator lights and the DVD+VCR
powers on automatically.
Still Picture and Frame-by-Frame Playback
4. If the
(TIMER) indicator in the display window
is lit, press POWER (1) once.
1. Press X (PAUSE) during playback.
A still picture appears on the TV screen and the
audio is muted.
5. If a tape without a safety tab is inserted the unit
starts playback automatically.
If not, press N (PLAY).
2
If the still picture vibrates vertically, stabilize it by
using v/V (-/+) on the Remote Control.
6. Press x (STOP) to stop playback. If the tape
reaches the end before you press x (STOP) the
DVD+VCR automatically stops, rewinds and
ejects the tape.
3. Press X (PAUSE) repeatedly to advance the
video picture one frame at a time.
4. To return to playback, press N (PLAY).
Note:
Note:
It is not necessary to select the tape speed for play-
back because it is automatically selected by the unit.
After 5 minutes in STILL mode the unit stops to protect the
tape and video heads.
Auto Tracking
Slow Motion
Automatic tracking adjusts the picture to remove
snow or streaks and beings when:
1. While in still mode, press M (FF).
The tape is played at a speed 1/19 times slower
than the normal speed.
•
•
•
A tape is played for the first time.
The tape speed (SP, LP, SLP) changes.
2. Use v/V (-/+) on the Remote Control if necessary
to adjust the tracking.
Streaks or snow appear due to scratches on the
tape.
3. To return to the normal speed, press N (PLAY).
Manual Tracking
Notes:
•
During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV screen.
This is normal.
To manually adjust the tracking use the v/V (-/+)
buttons on the Remote Control during playback.
Notes:
•
After 3 minutes in SLOW MOTION mode the unit
goes back to PLAY mode to protect the tape and
video heads.
•
•
Vertical jitter requires a very fine adjustment.
Tracking is automatically reset to normal when the tape
is ejected or the power cord is unplugged for more than
3 seconds.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
The other options are (LEFT) POSITION, which
results in the left channel sound (L) being heard
from both speakers or (RIGHT) POSITION, which
results in the right channel sound (R) being heard
from both speakers.
CM SKIP (Commercial Skip)
This feature is useful for skipping commercials or
short program segments.
1. Press
in playback mode.
The unit performs a fast forward picture search
through 30 seconds of recording.
3. Insert a cassette and press N (PLAY).
2. Press
again to extend the search time by an
addition 30 seconds. The maximum search time is
3 minutes.
MTS (Multi-Channel TV Sound)
3. When the search is complete, the unit goes into
playback mode automatically.
This DVD+VCR can decode MTS stereo and bilingual
(SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies
as long as they operate on assigned cable frequen-
cies and use the EIA-recommended MTS stereo/bilin-
gual TV sound system.
VHS Hi-Fi Stereo/
MTS Broadcast
Multichannel TV Sound Indicator (MTS)
When you press ENTER (OK) one or both of the indi-
cators appears on the TV Screen.
This DVD+VCR is equipped with the VHS Hi-Fi audio
sound system for recording and playback. The infor-
mation below gives a brief description of Hi-Fi audio
and how to record and play a tape in the Hi-Fi audio
mode.
STEREO
The DVD+VCR can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE
option is in the STEREO position. The DVD+VCR
can also record mono audio onto the mono audio
track.
Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a
stereo audio system is required for true stereo play-
back. To experience the full and rich stereo sound
available with Hi-Fi recorded tapes, we recommend
the connection of this unit to a home stereo audio
system.
SAP
Some stations transmit a Second Audio Program,
which is used for a second language or additional
information.
1. Set the AUDIO MODE option to HI-FI on the VCR
SETUP menu .
STEREO/SAP
Use the BROADCAST TYPE option to select the
desired recording mode (STEREO or SAP).
2. Set the AUDIO OUTPUT option to STEREO so
that the left channel sound (L) is heard from the
left speaker and the right channel sound (R) is
heard from the right speaker.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To record one TV program while watching
another
VCR Tape Recording
Basic Instructions
1. Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
1. Turn on the DVD+VCR and TV.
2. Using the TV, select the channel to be viewed.
2. Tune the TV to the DVD+VCR output channel
(CH 3 or 4) or if a direct VIDEO/AUDIO connec-
tion is made between the DVD+VCR and the TV,
set the TV’s source selector to VIDEO.
Timer Recording
3. Insert a video cassette with the safety tab intact.
For unattended recording, you must input the
channels to be recorded and the starting and ending
times.
4. Select the desired channel using CH (+/-).
5. If you are recording from another source via
audio/video input jacks (at the rear or front panel),
select LINE1 or LINE2 using AUX.
Things to know before starting
If you try to set the program timer before setting
the clock, “PLEASE SET THE CLOCK” appears
for a moment and then CLOCK menu appears on
the TV screen. Set the time and date before
proceeding.
6. Set the desired recording speed (SP or SLP) by
pressing SPEED. This DVD+VCR is not designed
to record in LP mode.
7. Set the MTS mode (STEREO or SAP). Set the
BROADCAST TYPE option to SAP if applicable.
1. Turn on the DVD+VCR and the TV.
8. Press z (REC) and recording starts. The REC
indicator appears in the display window. If a cas-
sette with no safety tab is loaded, the cassette is
ejected.
2. Be sure the TV is set to the DVD+VCR output
channel (3 or 4).
3. Make sure the TUNING BAND in the TUNING
menu is set appropriately (TV or CATV).
9. Press x (STOP) to stop recording. If the tape
reaches the end before x (STOP) is pressed, the
DVD+VCR stops, rewinds and ejects the tape.
4. Press SETUP MENU and the MAIN menu
appears.
Tip:
5. Use v / V to choose the PROGRAM menu and
press ENTER (OK).
Use X (PAUSE) for best results when making
changes while recording. For example, if you want to
change channels while recording, first press X
(PAUSE) to put the unit in pause mode, select the
desired channel on the DVD+VCR, and then press X
(PAUSE) again to resume recording.
Note:
During the VCR recording mode, you cannot change
to the DVD mode.
If eight programs are already entered, the FULLY
PROGRAMMED message appears for a moment
and then PROGRAM 1 appears on the TV
screen.
To pause the recording
1. Press X (PAUSE) to pause the tape during
recording. The REC indicator flashes in the display
window.
6. Use the v / V buttons to switch between the
program options, and the b / B buttons to input
the program information:
2. When you want to continue recording, press X
(PAUSE) or press z (REC).
Input the month, day, start and stop times of the
program you want to record.
After 5 minutes in PAUSE mode, the DVD+VCR
stops automatically to protect the tape and the
video heads.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL: Select a TV channel, LINE1 or
LINE2.
Checking or Erasing the Timer Program
If you have CABLE TV and use a cable box (con-
verter) you must set the channel to match the
cable box output channel (usually CH 3 or 4).
Change channels on the cable box instead of with
the DVD+VCR. If you use a cable converter, you
can program multiple recordings only on the con-
verter box output channel. This is because the
converter determines what channel you view
through your DVD+VCR.
Programming can be checked whenever the
DVD+VCR is turned on.
1. Press SETUP MENU and the MAIN menu
appears.
2. Use v / V to choose the PROGRAM menu and
press ENTER (OK).
SPEED: AUTO mode determines how much tape
is left and switches the speed from SP to SLP if it
is necessary to complete recording the program. If
this occurs there could be some picture and
sound distortion at the point where the speed
changes.
3. Use b / B to select a program you want to check
or erase. To erase the program, press CLEAR
(0000).
REPEAT: To record up to 8 programs on a certain
day of every week select WEEKLY. To record up
to 8 programs at the same time Monday through
Friday select DAILY. Otherwise select ONCE.
4. Press SETUP MENU to return to the TV screen.
7. Press SETUP MENU and the program is memo-
rized by the DVD+VCR.
Program Priority
8. Additional programs may be entered by repeating
steps 1-7.
If the recording start and end times of preset pro-
grams overlap on the same day (see the example),
the second program is not recorded until the first is
finished.
9. Ensure you insert a tape with the record safety
tab intact before the first programmed time.
10. Press x (STOP) to end timer recording.
Notes:
•
If you make a mistake or want to change a set-
ting, use v to select the option and correct it
using b / B.
•
If the program preset time is past, the “PAST
TIME PROGRAMMED” message appears on the
TV screen. Return to the incorrect program and
program it with the correct time.
In this example, the first part of program numbers 2
and 3 are not recorded.
•
•
If you enter a past date, the timer recording will
be performed on that date of the next year.
If the power fails or the DVD+VCR is unplugged
the clock and timer settings are kept in memory
for only 3 seconds. Otherwise you must reset the
clock and timer.
•
•
If the tape indicator is blinking, no tape is loaded.
When you are playing DVD at programmed
Recording time, the DVD+VCR automatically
change to VCR mode and start recording.
•
The DVD+VCR will automatically power off when
Timer Recording ends.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Recording (One-Touch Recording)
Instant Timer Recording
You can record from an external component, such as
a camcorder or VCR, connected to any of the unit’s
external inputs.
With this feature you can record for a preset length
without using the program timer.
1. Turn on DVD+VCR and the TV.
1. Make sure that the component you want to record
from is connected properly to the unit. See page 11.
2. Be sure the TV is tuned to the DVD+VCR output
channel (CH 3 or 4). If a direct VIDEO/AUDIO
connection is made between the DVD+VCR and
the TV, set the TV’s source selector to VIDEO.
2. Press AUX repeatedly to select the external input
to record from.
•
LINE1 (L1): Audio/Video Input mounted on
back panel.
3. Insert a video cassette with the safety tab intact.
•
LINE2 (L2): Audio/Video Input mounted on
front panel.
4. Select the desired channel using CH (+/-) or the
number buttons (0-9). The channel number
appears on the TV screen. If you are recording
from another source via audio/video input jacks
(at the rear or front panel), select LINE1 (rear
jacks) or LINE2 (front jacks) by using AUX.
3. Load a recordable tape.
4. Set a recording mode (SP or SLP) as necessary
by pressing SPEED repeatedly.
5. Play the tape or disc in the external component.
If you have a TV attached to your unit, you can
see the video playing.
5. Set the desired recording speed (SP or SLP)
using SPEED. The tape speed appears on the TV
screen.
6. Press z (REC) once to start recording.
The REC indicator lights in the display window.
6. Press z (REC) twice. The menu appears on the
7. Press x (STOP) to stop recording.
TV screen, recording starts, and the
indicator lights.
(TIMER)
Notes:
•
•
Before recording, confirm the recording start position.
INSTANT TIMER RECORD
If your source is copy-protected using CopyGuard,
you will not be able to record it using this unit.
See Copyright on page 6 for more details.
CHANNEL
SPEED
2
SP
START
LENGTH
NOW
0H30M
•
To record for a fixed length of time, see Instant
Timer Recording.
7. Press z (REC) repeatedly to select the recording
time length. Each time you press this button the
recording time increases 30 minutes (up to 9
hours). At the end of the recording, the DVD+VCR
will stop recording and shut off.
To pause the recording
1. Press X (PAUSE) to pause the tape during
recording. The REC indicator flashes in the
display window.
If you set the time to 0H00M, the DVD+VCR goes
into the normal recording mode. Press x (STOP)
to stop the recording.
2. When you want to continue recording, press
X (PAUSE) or press z (REC).
After 5 minutes in PAUSE mode, the unit stops
automatically to protect the tape and the video
heads.
Note:
During Instant Timer Recording, you cannot change
the channel on the DVD+VCR.
Checking the Recording Time
Press z (REC) once to check the recording time.
The recalled setting automatically returns to the TV
screen after 6 seconds.
Extending the Recording Time
The recording time can be extended anytime by
pressing z (REC). Subsequent presses result in
advancing the recording time by 30-minute increments.
Note:
If you press X (PAUSE) during instant timer record-
ing, the instant timer recording is cancelled. It goes to
normal recording PAUSE mode.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Each press of the ENTER (OK) changes the TV
screen in the following sequence.
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
STOP
SP
CH
4
STEREO
1. Insert the disc you wish to copy into the DVD
deck and close the disc tray.
JAN 1, MON
2:15 PM
2. Insert a blank VHS video tape into the VCR deck.
2:15 PM
0:35:40
3. Find the place on the DVD from which you want
to start dubbing using the PLAY, FF, REW and
PAUSE functions.
REM 1:58
For best results, pause playback at the point from
which you want to record.
Real-Time Counter
If a tape with contents recorded on it is inserted into
the VCR, the real-time counter shows length of the
tape running in hours, minutes, and seconds. Press
DISPLAY to select the real-time counter display.
Every press of DISPLAY changes the TV screen as
illustrated below.
4. Press the z (REC). The DVD goes into PLAY
mode and the VCR goes into RECORD mode. If
the DVD disc menu appears, you may need to
press N (PLAY) manually to begin copying.
5. When the DVD is finished playing, press x
(STOP) to end copying.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
Notes:
REMAINING TIME
•
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs (or Discs). “Lock” is
displayed in the display window.
Counter Memory
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
•
•
You must stop the copy process manually when the
DVD movie ends, or the unit may replay and record over
and over again.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is dis-
played on the TV screen.
When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.
3. At the point that you want to locate later, reset the
real-time counter to “0:00:00” by pressing
CLEAR (0000).
4. Continue to play or record.
On-Screen Display - VCR
Some of these functions will be displayed every time
the DVD+VCR is operated.
5. Press x (STOP) when recording or playback
finishes.
6. Press m (REW). The tape automatically stops
when the tape counter returns to about “0:00:00”.
❶
❷
❸
❹
❺
Tape Remaining
This function displays the amount of time remaining
on the tape during recording or playback. Press
DISPLAY repeatedly until the REM indicator displays
on the TV screen during recording or playback.
The remaining tape length may not be displayed cor-
rectly depending on the condition of the tape and the
kind of the tape (T-140, T-160, or T-210 etc.).
PLAY
SP
HI-FI
CH 4
STEREO
JAN 1 , MON 2:15 PM
Notes:
❻
❼
•
The function displays can be seen displayed on the TV
screen for 5 seconds.
❶ TAPE SPEED DISPLAY
❷ FUNCTION DISPLAY
❸ HI-FI DISPLAY
❺ STEREO/SAP DISPLAY
(MONO is not displayed)
•
The clock (or tape counter, tape remaining) mode will be
displayed until you press ENTER (OK).
❻ DATE DISPLAY
❼ CLOCK/ COUNT/
REMAIN DISPLAY
•
The tape counter and the remaining tape length indica-
tor appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape
operation.
❹ CHANNEL DISPLAY
25
Download from Www.Somanuals.com. All Manuals Search And Download.
S-VHS Quasi Playback (SQPB)
Additional VCR Information
•
•
•
•
During manual recording, timer recording, Instant
Timer Recording, playback, or fast forward
modes, the DVD+VCR automatically starts
rewinding the tape at the end of the tape. The
cassette stops at the beginning of the tape and is
ejected.
•
•
This DVD+VCR can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
SQPB is an abbreviation for S-VHS Quasi
Playback.
After you have finished using the DVD+VCR,
rewind, eject, and remove the cassette. Place the
cassette in its protective sleeve to protect it from
dust. It is not necessary to rewind the cassette
before removing it, but if you do, it is ready to play
or record the next time you use it.
Easy Information
If the Extended Data Service (XDS) signals are pro-
vided along with normal TV signal in your area or dur-
ing playback of a tape recorded with Extended Data
Service (XDS) signals, the station ID, program title,
and program details are shown on the TV screen.
When viewing a channel with Extended Data Service
(XDS) signals, press ENTER (OK) and the station ID
will appear on the TV screen. Press ENTER (OK)
again and the program details will appear on the TV
screen.
Be sure the DVD+VCR channel selector is on the
correct channel you wish to record. The channel
that is being recorded can always be checked by
setting the television on the DVD+VCR channel
(CH 3 or 4) and pressing the TV/VCR to turn the
DVD+VCR’s TV indicator off.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER (OK) twice and
the program title and program details will appear on
the TV screen.
Do not attempt to hook up more than one televi-
sion set to the DVD+VCR for either recording or
playback.
Program Details
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
VCR Auto Play System
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
This DVD+VCR features automatic playback.
When you load a tape with the safety tab removed
the following occurs:
•
The Output Source is changed to VCR mode
automatically.
CH
4
SP
WABC
STEREO
•
•
The power turns on automatically and playback begins.
At the end of the tape, the DVD+VCR stops, then
rewinds.
“Home video”
JAN 1 , MON
2:15 PM
•
The tape is ejected after rewinding and the turns itself
off automatically.
Easy Information Screen
(Station ID)
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Note:
Auto power off does not function during regular DVD play
mode. (DVD+VCR power stays on.)
Easy Information Screen
(Program details)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations - DVD
Playback Setup
ꢀTurn the TV on and select the video input source connected to this unit.
ꢀAudio System: Turn the Audio System on and select the input source connected to this unit.
1. Press Z (OPEN/CLOSE) to open the disc tray.
2. Load your chosen disc in the tray with the playback side down.
3. Press Z (OPEN/CLOSE) to close the tray.
READING appears on the display window, and playback starts automatically.
If playback does not start, press N (PLAY).
In some cases, the disc menu might appear instead.
Note:
If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see “Rating”, on page 17).
General features
Buttons
Operations
Discs
ALL
Z (OPEN / CLOSE)
X (PAUSE)
Opens or closes the disc tray.
During playback, press X to pause playback.
Press X repeatedly to play Frame-by-Frame.
ALL
DVD
VCD
DivX
. / > (SKIP)
During playback, press . or > to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
ALL
Press SKIP . twice briefly to step back to the previous
chapter/track.
m / M
(REW / FF)
During playback, press m or M repeatedly to
select the required scan speed.
DVD, DivX disc; 4 steps
DVD
ACD
VCD
MP3
DivX
DivX
Video CD, MP3, Audio CD ; 3 steps
While the playback is paused, press M repeatedly to
play in slow motion (4 steps, forward only).
DVD
ALL
VCD
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
Note:
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
REPEAT A-B
During playback, each press of A-B button to select point
A and point B and repeats a sequence from point A
(Starting point) to point B (End point).
DVD
DivX
VCD
ACD
Note:
The A-B repeat function is available only in the current track.
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image (4 steps).
DVD
VCD
DIVX
You can move through the zoomed picture using b B v V
buttons. Press CLEAR (0000) to exit.
Note:
Zoom may not work on some DVDs.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons
Operations
Discs
RANDOM
During playback or in stop mode, press RANDOM for ran-
dom playback.
ACD
MP3
WMA
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DVD
DVD
DVD
DISC MENU
ANGLE
The disc menu appears on the screen.
During playback of DVD disc contains scenes recorded
different camera angles, press ANGLE repeatedly to
select a desired angle.
Tip:
The Camera Angle icon is displayed on the TV screen
when alternate angles are available.
DVD
DivX
DivX
SUBTITLE
During playback, press SUBTITLE repeatedly to select a
desired subtitle language.
A.MONITOR
During playback, press A.MONITOR repeatedly to hear a
different audio language or audio track.
DVD
VCD
Marker Search DVD
VCD
DivX
Additional features
3D Surround
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to nine
markers.
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
DVD
VCD
DivX
To Recall or Clear a Marked Scene
1. Press DISPLAY during playback.
1. During disc playback, press SEARCH. The mark-
er search menu appears on the screen.
2. Use 3 or 4 to select the sound option.
The sound option will be highlighted.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Use 1 or 2 to select “3D SUR”. To turn off the 3D
Surround effect, select “Normal”.
3. Press ENTER (OK) and playback starts from the
marked scene. Or, Press CLEAR (0000) and the
marker number is erased from the list.
ACD
1. Press A.MONITOR during playback.
“3D SUR” appears on the menu screen.
4. You can play any marker by inputting its number
on the marker search menu.
2. To return to normal playback, press A.MONITOR
repeatedly until “3D SUR” disappears from the
menu screen.
Last Scene Memory DVD
ACD
VCD
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Time Search DVD
VCD
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
Note:
This player does not memorize the scene of a disc if
you switch off the player before commencing to play
the disc.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR (0000) to remove
the numbers you entered. Then input the correct
numbers.
Screen Saver
The screen saver appears when you leave the
DVD+VCR in Stop mode for about five minutes.
4. Press ENTER (OK) to confirm. Playback starts
from the selected time.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or
MP3/WMA file
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
This unit can play Audio CDs or MP3/WMA files
recorded media.
1. Insert an Audio CD or MP3/WMA files recorded
media. AUDIO CD or MUSIC menu appears.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
or Audio CD, a menu appears on the TV screen.
Press v / V to select a track/file then press PLAY or
ENTER (OK) and playback starts. You can use vari-
able playback functions. Refer to page 27-28.
2. During STOP mode, press PROGRAM and
E
the
mark will appear
Note:
Press PROGRAM again to exit the program edit
E
mode, then the
mark will disappear.
3. Select a track on the “List”, then press ENTER
(OK) to place the selected track on the “Program”
list. Repeat to place additional tracks on the list.
4. Select the track you want to start playing on the
“Program” list.
ID3 TAG
5. Press N (PLAY) or to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. [ Song, Artist, Album, Comment, Genre ]
6. To resume normal playback from programmed
playback, select a track on the list and then press
N (PLAY).
• If there is no information, “No ID3 TAG” appear on
the menu screen.
Tips:
Repeat Programmed Tracks
•
If you are in a file list on the “MUSIC” menu and
want to return to the Folder list, use the v / V to
Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
highlight
and press ENTER (OK).
• Press DISC MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
Note:
If you press > once during Repeat Track playback,
the repeat playback cancels.
Erasing a Track from “Program” List
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
1. During STOP mode, press PROGRAM and
E
the
mark will appear
within 32 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
32 - 320kbps (WMA)
2. Use v V b B to select the track that you wish to
erase from the Program list.
3. Press CLEAR (0000). Repeat step 1~3 to erase
additional tracks on the list.
• The player cannot read an MP3/WMA file that
has a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software
that cannot create a file system (eg. Direct-CD)
it is impossible to playback MP3 / WMA files.
We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as
/ ? * : “ < > l etc.
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
E
the
mark will appear
2. Use v V b B to select “Clear All”, then press .
Note:
The programs are also cleared when the power is off
or the disc is removed.
• The total number of files in a folder should be
less than 1190 files.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide Show
Viewing a JPEG Disc
Using this DVD+VCR you can view discs with JPEG
files.
Use v V b B to highlight the
press ENTER (OK).
(Slide Show) then
1. Insert a disc and close the tray. The PHOTO
menu appears on the TV screen.
Still Picture
1. Press X (PAUSE) during slide show.
The player will now go into PAUSE mode.
2. To return to the slide show, press N (PLAY) or
press X (PAUSE) a gain.
Moving to another File
Press > or . or cursor (b or B) once while
viewing a picture to advance to the next or
previous file.
Zoom
Use zoom to enlarge the photo image. (see page 27)
2. Press v / V to select a folder, and press ENTER
(OK). A list of files in the folder appears.
To rotate picture
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
remote to highlight
and press ENTER (OK).
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER (OK) or
N (PLAY). The selected file will appear for
viewing.
JPEG disc compatibility with this player is
limited as follows:
While viewing a file, you can press x (STOP) to
move to the previous menu (PHOTO menu).
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD+VCR
to read the disc’s contents. If you don’t see an
on-screen display after several minutes, some of
the files may be too large — reduce the resolution
of the JPEG files to less than 5760 (Horizontal) x
3840 (Vertical) pixels and burn another disc.
Tips:
•
Information and user guidance regarding the cur-
rent image is displayed in the lower part of the
screen. You can toggle this bar on and off using
RETURN (O).
•
There are three Slide Speed options
>>> (Fast), >> (Normal) and > (Slow)
:
• The total number of files in a folder should be
less than 1190 files.
Use v V b B to highlight the Speed. Then, use b
/ B to select the option you want to use then
press ENTER (OK).
• Some discs may be incompatible due to a differ-
ent recording format or the condition of disc.
•
On a disc with MP3/WMA and JPEG you can
switch MP3/WMA and JPEG. Press TITLE and
MUSIC or PHOTO word on top of the menu is
highlighted.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD+VCR. Even though
the files are shown as JPEG image files in
Windows Explorer.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DivX Movie file
Using this DVD+VCR, you can play DivX file.
DivX disc compatibility with this player is
limited as follows:
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1. Insert a DivX file recorded media. The MOVIE
menu appears on the TV screen.
• The file name of the DivX subtitle is available by
56 characters.
• If there is impossible code to express in the DivX
file, it may be displayed as “ _ ” mark on the dis-
play.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate nor-
mally.
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
2. Press v / V to select a folder, and press . A list of
files in the folder appears.
• If the file is recorded with GMC, the unit sup-
ports only 1-point of the record level.
3. If you want to view a particular file, press v / V to
highlight a file and press or N (PLAY).
You can use variable playback functions. Refer to
page 27-28.
GMC?
*
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX, have this option.
There are different levels of GMC encoding,
usually called 1-point, 2-point, or 3-point GMC.
4. Press x (STOP) to stop the playback. The Movie
menu appears
Tips:
• If you are in a file list and want to return to the pre-
Playable DivX file
.avi, .mpg, .mpeg
vious Folder list, use the v / V buttons on the
remote to highlight
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
and press .
• Press DISC MENU to move to the next page.
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt) /
TMPlayer(*.txt)
• On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE and MUSIC, PHOTO and MOVIE word
on top of the menu is highlighted.
• The disc subtitle may not be displayed properly, if a
DivX subtitle is downloaded through the internet.
Playable Codec format
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”,
“MP43”, “3IVX”.
• If the Disc Subtitle setup menu does not have the
DivX subtitile language you are going to play, the
subtitle may not be displayed properly.
Playable Audio format
“Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”.
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 320kbps (WMA)
Notice for displaying the DivX subtitle
If the subtitle does not display properly during play-
back, press and hold SUBTITLE about 3 seconds
then press b / B to select another language code until
the subtitle is displayed properly.
• Not all the WMA Audio format is compatible with
this unit.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format
Disc
This unit will play DVD-R/RW discs recorded using
the DVD-Video format that have been finalized using
a DVD-recorder.
Maintenance and Service
Refer to the information in this chapter before con-
tacting a service technician.
Handling the Unit
• This unit will play DVD-RW discs recorded using
the Video Recording (VR) format.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
1. Insert a disc and close the tray, It start playing
automatically.
2. The DVD-VR menu appears on the TV screen
when you press DISC MENU buttons while play-
ing.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the sur-
faces are extremely dirty, use a soft cloth lightly mois-
tened with a mild detergent solution.
3. Press v / V to select a track then press PLAY or
and playback starts.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
4. Press DISC MENU to move to the list menu.
Notes:
• Unfinalized DVD-R/RW discs cannot be played in
this player.
Maintaining the Unit
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. Player does not support these
kinds of discs.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
What is ‘CPRM’?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
For details, please contact your nearest authorized
service center.
This player is CPRM compatible, which means that
you can record copy-once broadcast programs, but
you cannot then make a copy of those recordings.
CPRM recordings can only be made on DVD-RW
discs formatted in VR mode, and CPRM recordings
can only be played on players that are specifically
compatible with CPRM.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Bengali; Bangla
Bhutani
Bihari
Hebrew
Hindi
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Area Codes List
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
FI
FR
DE
GB
GR
GL
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
Brazil
NL
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Heard and McDonald Islands HM
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
HK
HU
IN
ID
IL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
IT
JM
JP
KE
KW
LY
LU
PT
RO
El Salvador
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall out-
let securely.
ꢀ Refer to page 6.
The power is on, but
the DVD+VCR does
not work.
ꢀ DVD or VCR button is not switched
properly.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
ꢀ No disc is inserted.
ꢀ No tape is inserted.
No picture.
ꢀ Select the appropriate video input
mode on the TV so the picture from
the DVD+VCR player appears on the
TV screen.
ꢀ The TV is not set to receive DVD+VCR
signal output.
ꢀ Connect the video cable into the jacks
securely.
ꢀ The video cable is not connected
securely.
ꢀ Check the connection.
ꢀ Wrong connection.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive
DVD+VCR signal output.
ꢀ Connect the audio cable into the jacks
securely.
ꢀ The audio cables are not connected
securely.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Set the AUDIO options to the correct
position.
ꢀ The AUDIO options are set to the wrong
position.
ꢀ Clean the disc.
ꢀ The disc is dirty.
The playback picture is
poor.
ꢀ Check tuning, carry out tuning again.
ꢀ Clean video heads.
ꢀ The TV channels are not tuned in properly.
ꢀ Tape heads are dirty.
ꢀ Use CH (v/V) for manual tracking
adjustment while tape is playing.
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ Make sure that your TV can support
525p Progressive scan picture or set
Progressive scan to off.
ꢀ This unit can only output 525p
Progressive scan picture.
The “PROGRESSIVE
SCAN MODE”
ꢀ DVD+VCR was turned off while setting
the Progressive scan mode.
ꢀ Keep pressing the x (STOP) button
for more than 5 seconds.
message remains to be
displayed.
ꢀ The Progressive Scan is set to “On” on
the setup menu but is connected to a
standard(analog) television with compo-
nent video input.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
Correction
Symptom
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type and Regional code.)
The DVD+VCR does
not start playback.
ꢀ Place the disc with the playback side
down.
ꢀ The disc is placed upside down.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is not placed within the
guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change
the rating level.
ꢀ The Rating level is set.
ꢀ Eject the tape in.
ꢀ Is the cassette compartment empty?
ꢀ Audio mode is not set properly.
Video tape cannot be
inserted.
No Hi-Fi sound
ꢀ Select STEREO by repeatedly pressing
AUDIO on the remote control.
ꢀ Remove the obstacle.
The remote control
does not work properly.
ꢀ There is an obstacle in the path of the
remote control and this unit.
ꢀ Replace the batteries with new ones.
ꢀ The batteries in the remote control are
exhausted.
ꢀ Point the remote control at the remote
sensor of the DVD+VCR.
ꢀ The remote control is not pointed at
the remote sensor of the DVD+VCR.
ꢀ Operate the remote control within 23ft
(7m).
ꢀ The remote control is too far from the
DVD+VCR.
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
ꢀ This remote control use the same
buttons for VCR and DVD functions
(ex.PLAY).
ꢀ Turn camcorder on and operate
properly.
Camcorder image is
not shown.
ꢀ Camcorder is off.
ꢀ Press AUX to select LINE input
channel (LINE1 or LINE2).
Camcorder image via
AV input to DVD+VCR
is not shown on TV
screen.
ꢀ DVD+VCR SOURCE SELECT is not
set to LINE1 or LINE2.
Timer recording is not
possible.
ꢀ Set clock to correct time.
ꢀ Reprogram Timer.
ꢀ Clock in DVD+VCR is not set to
correct time.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer and turn DVD+VCR
off to enable timer.
ꢀ
indicator light does not appear after
programming timer.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
120V, 60 Hz
16 W
16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d)
9.26 lbs (4.2 kg)
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
Power consumption
Dimensions (approx.)
Weight (approx.)
Operating temperature
Operating humidity
Signal system
NTSC
Inputs
ANTENNA IN
VHS VIDEO IN(LINE1, 2)
VHS AUDIO IN(LINE1, 2)
75 ohms (VHF/UHF/CATV)
1 V (p-p) 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2
Outputs
VIDEO OUT
S-VIDEO OUT
1 V (p-p) 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
COMPONENT VIDEO OUT(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
RF OUT
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1
Channel 3 or 4 (Adjustable)
VCR Specifications
Head system
Timer
Tape speed
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
Tape width
Maximum recording time
Rewind time
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20 Hz to 20 kHz
More than 43 dB
More than 88 dB
More than 60 dB
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 8 Hz to 44 kHz,
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (ANALOG OUT jacks only)
Less than 0.008%
More than 95 dB (DVD/CD)
Accessories:
Video cable x 1, Audio cable (L/R) x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2
• Design and specifications are subject to change without prior notice.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
0608SKMLGEEGL
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|