Intel Computer Hardware 8S661FXM RZ User Manual

8S661FXM-RZ

Intel Pentium^®4 Processor Motherboard

User's Manual

Rev. 1101

12ME-S661FXMRZ-1101

CopyrightbyGIGA-BYTETECHNOLOGYCO., LTD. ("GBT"). Nopartofthis manualmay bereproducedortransmittedinanyfrom

without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on motherboard, this may void the warranty of this motherboard.

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a

commitment to update the information contained herein.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparing Your Computer

Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow some precautions whenever you

work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do not have one,

touch both of your hands to a safely grounded object or to a metal object, such as the power

supply case.

3. Hold components by the edges and try not touch the IC chips, leads or connectors, or other

components.

4. Place components on a grounded antistatic pad or on the bag that came with the components

whenever the components are separated from the system.

5. Ensure that theATX power supply is switched off before you plug in or remove theATX power

connectoronthemotherboard.

Installing the motherboard to the chassis

If the motherboard has mounting holes, but they don't line up with the holes on the base and there

are no slots to attach the spacers, do not become alarmed you can still attach the spacers to the

mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, so

be careful of your hands). In this way you can still attach the motherboard to the base without worrying

about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the

motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the

screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it

may damage the board or cause board malfunctioning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Content

Chapter 1 Introduction .................................................................................................... 5

Features Summary ..................................................................................................................... 5

8S661FXM-RZMotherboardLayout ............................................................................................ 7

Block Diagram ............................................................................................................................ 8

Hardware Installation Process ..................................................................................................... 9

Step 1: Install the Central Processing Unit (CPU) ....................................................................... 9

Step 1-1: CPU Installation .................................................................................................. 10

Step 1-2: CPU Cooling Fan Installation .............................................................................. 10

Step 2: Install memory modules ................................................................................................. 11

Step 3: Install expansion cards .................................................................................................. 12

Step 4: Install I/O Peripherals Cables ....................................................................................... 12

Step 4-1: I/O Back Panel Introduction ................................................................................ 12

Step 4-2: Connectors Introduction ....................................................................................... 13

Chapter 2 BIOS Setup .................................................................................................. 21

The Main Menu (For example: BIOS Ver. : F8c) ...................................................................... 21

Standard CMOS Features ........................................................................................................ 23

Advanced BIOS Features ......................................................................................................... 25

Integrated Peripherals ............................................................................................................... 27

Power Management Setup ........................................................................................................ 29

PnP/PCI Configurations............................................................................................................ 31

PCI Health Status ..................................................................................................................... 32

MB Intelligent Tweaker (M.I.T.) ................................................................................................. 33

TopPerformance ....................................................................................................................... 34

LoadFail-SafeDefaults .............................................................................................................. 35

LoadOptimizedDefaults ............................................................................................................ 35

Set Supervisor/User Password ................................................................................................ 35

Save & Exit Setup.................................................................................................................... 36

Exit Without Saving .................................................................................................................. 36

Chapter 3 Driver Installation ......................................................................................... 37

8S661FXM-RZ Motherboard

- 4 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 1 Introduction

Features Summary

CPU

Socket 478 for Intel^®Micro FC-PGA2 Pentium^®4 processor

Support Intel^®Pentium^®4 (Northwood, Prescott) processor

Support Intel^®Pentium^®4 Processor with HT Technology^{<Note >}

Intel^®Pentium^®4 800/533/400MHz FSB

2nd cache depends on CPU

North Bridge:SiS^®Chipset 661FX

South Bridge:SiS^®963L

Chipset

Memory

2 184-pin DDR sockets

Supports DDR400/DDR333/DDR266

Supports up to 2 unbuffered DIMM DDR400

Supports up to 2GB (Max)

Slots

1 AGP slot 4X/8X (1.5V) device support

3 PCI slot

On-Board IDE

2 IDE bus master (UDMA33/ATA66/ATA100/ATA133) IDE

ports for up to 4 ATAPI devices

Supports PIO mode3,4 (UDMA 33/ATA66/ATA100/ATA133)

IDE & ATAPI CD-ROM

On-Board Floppy

Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and 2.88M bytes

1 Parallel port

On-Board Peripherals

1 Serial port (COMA),1 VGA port,COMB on board

6 x USB 2.0/1.1 (2 x Rear, 4 xFront by cable)

1 Front Audio Connector

PS/2 Keyboard interface and PS/2 Mouse interface

Build in SiS661FX Chipset

On-Board VGA

On-Board LAN

On-Board Sound

Build in ICS1883 Chipset

CMedia 9761 codec

Line Out / 2 front speaker

Line In / 2 rear speaker(by s/w switch)

Mic In / center& subwoofer(by s/w switch)

SPDIF Out /SPDIF In

CD_In / Game Port

BIOS

Licensed Award BIOS

Supports Q-Flash

to be continued......

- 5 -

Introduction

Download from Www.Somanuals.com. All Manuals Search And Download.

I/O Control

IT8705

Hardware Monitor

CPU/System Fan Revolution detect

CPU temperature detect

System Voltage Detect

Additional Features

Form Factor

Supports EasyTune 4

Supports @BIOS

23.0cm x 24.4cm Micro ATX size form factor, 4 layers PCB.

Please set the CPU host frequency in accordance with your processor's specifications.

We don't recommend you to set the system bus frequency over the CPU's specification

because these specific bus frequencies are not the standard specifications for CPU,

chipset and most of the peripherals. Whether your system can run under these specific

bus frequencies properly will depend on your hardware configurations, including CPU,

Chipsets, Memory, Cards….etc.

8S661FXM-RZ Motherboard

- 6 -

Download from Www.Somanuals.com. All Manuals Search And Download.

8S661FXM-RZ Motherboard Layout

23.0 cm

KB_MS

CPU_FAN

COMB

SOCKET 478

ATX_12V

F_AUDIO

SiS 661FX

AGP

ICS1883

BATTERY

PCI1

IT8705

PCI2

SiS 963L

BIOS

PCI3

CODEC

F_USB1

F_USB2

F_PANEL

SPDIF_IO

PWR_LED

CD_IN

SUR_CEN

"*" Only for 8S661FXM-RZ Rev. 1.1

- 7 -

Introduction

Download from Www.Somanuals.com. All Manuals Search And Download.

Block Diagram

Pentium 4

Socket 478

CPU

CPUCLK+/- (100/133/200MHz)

AGP 4X/8X

System Bus

800/533/400MHz

AGPCLK

(66MHz)

266/333/400MHz

DDR RAM

VGA Port

SiS 661FX

MCHCLK (100/133/200MHz)

66 MHz

33 MHz

14.318 MHz

3 PCI

ICS

1883

48 MHz

BIOS

LPCBUS

Game Port

Floppy

SiS 963L

IT8705

LPT Port

24 MHz

2 COM Ports

33 MHz

AC97

6 USB

Ports

ATA33/66/100/133

IDE Channels

CODEC

PCICLK

(33MHz)

PS/2 KB/Mouse

8S661FXM-RZ Motherboard

- 8 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware Installation Process

To set up your computer, you must complete the following steps:

Step 1- Install the Central Processing Unit (CPU)

Step 2- Install memory modules

Step 3- Install expansion cards

Step 4- Install I/O Peripherals cables

Step 2

Step 1

Step 4

Step 3

Step 1: Install the Central Processing Unit (CPU)

Before installing the processor, adhere to the following warning:

1. Please make sure the CPU type is supported by the motherboard.

2. The processor will overheat without the heatsink and/or fan, resulting in permanent

irreparable damage.

3. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper

installation. Please change the insert orientation.

4. Apply thermal grease between the processor and cooling fan.

5. Never run the processor without the heatsink properly and firmly attached. Permanent

damage will result.

6. Please set the CPU host frequency in accordance with your processor's specifications.

We don't recommend you to set the system bus frequency over the CPU's specification

because these specific bus frequencies are not the standard specifications for CPU,

chipset and most of the peripherals. Whether your system can run under these specific

bus frequencies properly will depend on your hardware configurations, including CPU,

Memory, Cards…etc.

HT functionality requirement content :

Enabling the functionality of Hyper-Threading Technology for your computer system

requires all of the following platform components:

- CPU: An Intel^®Pentium 4 Processor with HT Technology

- Chipset: A SiS^®Chipset that supports HT Technology

- BIOS: A BIOS that supports HT Technology and has it enabled

- OS: An operation system that has optimizations for HT Technology

- 9 -

Hardware Installation Process

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 1-1: CPU Installation

Figure 1.

Socket

Actuation

Lever

Pull the rod to the 90-degree directly.

Figure 2.

Locate Pin 1 in the socket and look for a (golden) cut edge on the

CPU upper corner. Insert the CPU into the socket. (Do not force the

CPU into the socket.) Then move the socket lever to the locked

position while holding pressure on the center of the CPU.

Step 1-2: CPU Cooling Fan Installation

Figure 1.

Apply the thermal tape(or grease) to provide better heat conduction

between your CPU and cooling fan.

Figure 2.

Fasten the cooling fan supporting-base onto the CPU socket on the

motherboard.

Figure 3.

Make sure the CPU fan is plugged to the CPU fan connector, than

install complete.

8S661FXM-RZ Motherboard

- 10 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 2: Install memory modules

Before installing the memory modules, adhere to the following warning:

Please note that the DIMM module can only fit in one direction due to the one notch. Wrong

orientation will cause improper installation. Please change the insert orientation.

The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically

detects memory type and size. To install the memory module, just push it vertically into the DIMM

socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary between

sockets.

Notch

DDR

Support Unbuffered DDR DIMM Sizes type:

64 Mbit (2Mx8x4 banks)

128 Mbit(2Mx16x4 banks)

512 Mbit(16Mx8x4 banks)

64 Mbit (1Mx16x4 banks)

256 Mbit(8Mx8x4 banks)

512 Mbit(8Mx16x4 banks)

128 Mbit(4Mx8x4 banks)

256 Mbit(4Mx16x4 banks)

1. The DIMM socket has a notch, so the DIMM

memory module can only fit in one direction.

2. Insert the DIMM memory module vertically into

the DIMM socket. Then push it down.

3. Close the plastic clip at both edges of the DIMM

sockets to lock the DIMM module.

Reverse the installation steps when you wish to

remove the DIMM module.

- 11 -

Hardware Installation Process

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Install expansion cards

1. Read the related expansion card's instruction document before install the expansion card into

the computer.

2. Please make sure your AGP card is AGP 4X/8X (1.5V).

3. Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to

install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly

down on the slot .Make sure your AGP card is locked by the small white- drawable bar.

AGP Card

Step 4: Install I/O Peripherals Cables

Step 4-1: I/O Back Panel Introduction

[

]

X PS/2 Keyboard and PS/2 Mouse connector

This connector supports standard PS/2 keyboard and PS/2 mouse.

Y Parallel port (LPT)

Device like printer can be connected to Parallel port.

Z Serial port (COMA)

Mouse and modem etc. can be connected to Serial port.

[ VGA port

Monitor can be connected to VGA port.

\ Game/MIDI port

This connector supports joystick, MIDI keyboard and other relate audio devices.

] Line Out jack

Connect the stereo speakers or earphone to this connector.

^ Line In jack

Devices like CD-ROM, walkman etc. can be connect to Line In jack.

8S661FXM-RZ Motherboard

- 12 -

Download from Www.Somanuals.com. All Manuals Search And Download.

_ MIC In jack

Microphone can be connect to MIC In jack.

After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software

selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In"

jack and connect "Center/Subwoofer" to "MIC In" jack.

` LAN port

LAN is fast Ethernet with 10/100Mbps speed.

a USB port

Before you connect your device(s) into USB connector(s), please make sure your device(s) such

as USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also make

sure your OS supports USB controller. If your OS does not support USB controller, please contact

OS vendor for possible patch or driver upgrade. For more information please contact your OS or

device(s) vendors.

Step 4-2: Connectors Introduction

3 1

17*

13 12

1) ATX_12V

2) ATX

10) F_AUDIO

11) CD_IN

3) CPU_FAN

4) SYS_FAN

5) FDD

12) SPDIF_IO

13) SUR_CEN

14) F_USB1 / F_USB2

15) CLR_CMOS

16) COMB

6) IDE1 / IDE2

7) F_PANEL

8) PWR_LED

9) BAT

17) CI* ("*" Only for 8S661FXM-RZ Rev. 1.1)

- 13 -

Hardware Installation Process

Download from Www.Somanuals.com. All Manuals Search And Download.

1) ATX_12V (+12V Power Connector)

This connector (ATX _12V) supplies the CPU operation voltage (Vcore).

If this " ATX_ 12V connector" is not connected, system cannot boot.

Pin No. Definition

GND

+12V

2) ATX (ATX Power)

AC power cord should only be connected to your power supply unit after ATX power cable and other

related devices are firmly connected to the mainboard.

Pin No. Definition

3.3V

-12V

GND

VCC

PS_ON(soft on/off)

GND

-5V

VCC

GND

Power Good

5V SB (stand by +5V)

+12V

VCC

3) CPU_FAN (CPU FAN Connector)

Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running

under abnormal condition or damaged by overheating.The CPU fan connector supports Max.

current up to 600 mA.

Pin No. Definition

GND

+12V

Sense

8S661FXM-RZ Motherboard

- 14 -

Download from Www.Somanuals.com. All Manuals Search And Download.

4) SYS_FAN (System FAN Connector)

This connector allows you to link with the cooling fan on the system case to lower the system

temperature.

Pin No. Definition

GND

+12V

Sense

5) FDD (Floppy Connector)

Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and

2.88Mbytes floppy disk types.

The red stripe of the ribbon cable must be the same side with the Pin1.

6) IDE1/ IDE2(IDE1/IDE2 Connector)

Please connect first harddisk to IDE1 and connect CDROM to IDE2.

The red stripe of the ribbon cable must be the same side with the Pin1.

IDE2

IDE1

- 15 -

Hardware Installation Process

Download from Www.Somanuals.com. All Manuals Search And Download.

7) F_PANEL (2x10 pins connector)

Please connect the power LED, PC peaker, reset switch and power switch etc of your chassis front

panel to the F_PANEL connector according to the pin assignment above.

Soft Power

Speaker

Connector

Message LED/Power/

Sleep LED

Connector

PW-

PW+

SPK-

MPD-

MPD+

SPK+

HD+

HD-

IDE Hard Disk

Active LED

RST-

RST+

Reset Switch

HD (IDE Hard Disk Active LED)

SPK(SpeakerConnector)

Pin 1: LED anode(+)

Pin 2: LED cathode(-)

Pin1:VCC(+)

Pin 2- Pin 3: NC

Pin4:Data(-)

RST (Reset Switch)

Open:NormalOperation

Close: Reset Hardware System

Open: NormalOperation

Close: Power On/Off

Pin 1: LED anode(+)

Pin 2: LED cathode(-)

PW(Soft Power Connector)

MPD(MessageLED/Power/

SleepLED)

8 ) PWR_LED

PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will

blink when the system enters suspend mode. If you use dual color LED, power LED will turn to

another color.

Pin No. Definition

MPD+

MPD-

8S661FXM-RZ Motherboard

- 16 -

Download from Www.Somanuals.com. All Manuals Search And Download.

9) BAT (Battery)

CAUTION

Danger of explosion if battery is incorrectly

replaced.

Replace only with the same or equivalent type

recommended by the manufacturer.

Dispose of used batteries according to the

manufacturer's instructions.

If you want to erase CMOS...

1. Turn OFF the computer and unplug the power cord.

2. Remove the battery, wait for 30 second.

3. Re-install the battery.

4. Plug the power cord and turn ON the computer.

10) F_AUDIO (F_AUDIO Connector)

If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the

front audio header, your chassis must have front audio connector. Also please make sure the pin

assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis

you are buying support front audio connector, please contact your dealer.Please note, you can

have the alternative of using front audio connector or of using rear audio connector to play sound.

Pin No. Definition

MIC

GND

REF

POWER

FrontAudio(R)

RearAudio(R)

Reserved

No Pin

FrontAudio(L)

RearAudio(L)

- 17 -

Hardware Installation Process

Download from Www.Somanuals.com. All Manuals Search And Download.

11) CD_IN

Connect CD-ROM or DVD-ROM audio out to the connector.

Pin No. Definition

CD-L

GND

CD_R

12) SPDIF_IO (SPDIF In/Out)

The SPDIF output is capable of providing digital audio to external speakers or compressed AC3

data to an external Dolby Digital Decoder. Use this feature only when your stereo system has

digital input function. Use SPDIF IN feature only when your device has digital output function.

Be careful with the polarity of the SPDIF_IO connector. Check the pin assignment carefully while

you connect the SPDIF_IO cable, incorrect connection between the cable and connector will

make the device unable to work or even damage it. For optional SPDIF_IO cable, please contact

your local dealer.

Pin No. Definition

VCC

No Pin

SPDIF

SPDIFI

GND

13) SUR_CEN

Please contact your nearest dealer for optional SUR_CEN cable.

Pin No. Definition

SUROUTL

SUROUTR

GND

No Pin

CENTER_OUT

BASS_OUT

8S661FXM-RZ Motherboard

- 18 -

Download from Www.Somanuals.com. All Manuals Search And Download.

14) F_ USB1 / F_USB2 (Front USB Connector)

Be careful with the polarity of the F_USB connector. Check the pin assignment carefully while you

connect the F_USB cable, incorrect connection between the cable and connector will make the

device unable to work or even damage it. For optional F_USB cable, please contact your local

dealer.

Pin No. Definition

Power

USBDX-

USBDy-

USBDX+

USBDy+

GND

No Pin

15) CLR_CMOS (Clear CMOS)

You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily

short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.

Open: Normal

Short: Clear CMOS

16) COMB (COM B Connector)

Be careful with the polarity of the COMB connector. Check the pin assignment carefully while you

connect the COMB cable, incorrect connection between the cable and connector will make the

device unable to work or even damage it. For optional COMB cable, please contact your local

dealer.

Pin No.

Definition

NDCDB-

NSINB

NSOUTB

NDTRB-

GND

NDSRB-

NRTSB-

NCTSB-

NRIB-

No Pin

- 19 -

Hardware Installation Process

Download from Www.Somanuals.com. All Manuals Search And Download.

17) CI (Chassis Intrusion, Case Open) *

This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if

the system case begin remove.

Pin No.

Definition

Signal

GND

"*" Only for 8S661FXM-RZ Rev. 1.1

8S661FXM-RZ Motherboard

- 20 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2 BIOS Setup

Chapter 2 provides an overview of the BIOS Setup Program, which allows users to modify the basic

system configurations. This type of information is stored in battery-backed CMOS RAM so that it retains

the Setup information when the power is turned off.

ENTERING BIOS Setup

Turning on the computer and pressing <Del> immediately allow you to enter BIOS Setup. If you need

more advanced BIOS settings, please press Ctrl and F1 keys on the BIOS main screen to access the

the advanced BIOS settings.

CONTROL KEYS

< >< >< ><

<Enter>

Move to select item

Select Item

<Esc>

Main Menu - Quit and not save changes into CMOS Status Page Setup Menu

and Option Page Setup Menu - Exit current page and return to Main Menu

Increase the numeric value or make changes

Decrease the numeric value or make changes

General help, only for Status Page Setup Menu and Option Page Setup Menu

Item Help

<+/PgUp>

<-/PgDn>

<F1>

<F2>

<F5>

<F6>

<F7>

Restore the previous CMOS value from CMOS, only for Option Page Setup Menu

Load the file-safe default CMOS value from BIOS default table

Load the Optimized Defaults

<F8>

Q-Flash utility

<F9>

System Information

<F10>

Save all the CMOS changes, only for Main Menu

Main Menu

The on-line description of the highlighted setup function is displayed at the bottom of the screen.

Status Page Setup Menu / Option Page Setup Menu

Press F1 to pop up a small help window that describes the appropriate keys to use and the possible

selections for the highlighted item. To exit the Help Window, press <Esc>.

The Main Menu (For example: BIOS Ver. : F8c)

Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the

screen. The Main Menu allows you to select from eight setup functions and two exit choices. Use

arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

}

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

MB Intelligent Tweaker (M.I.T.)

Exit Without Saving

ESC: Quit

higf: Select Item

F8: Q-Flash

F10: Save & Exit Setup

Time, Date, Hard Disk Type...

- 21 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

If you can't find the settings you want, press Ctrl and F1 in BIOS main menu to

access the hidden advanced options.

• Standard CMOS Features

This setup page includes all the items in standard compatible BIOS.

• Advanced BIOS Features

This setup page includes all the items of Award special enhanced features.

• Integrated Peripherals

This setup page includes all onboard peripherals.

• Power Management Setup

This setup page includes all the items of Green function features.

• PnP/PCI Configuration

This setup page includes all the configurations of PCI & PnP ISA resources.

• PC Health Status

This setup page includes the information of the System auto-detected temperature, voltage, fan,

and speed.

• MB Intelligent Tweaker (M.I.T.)

This setup page allows to control CPU clock and frequency ratio.

• Top Performance

If you wish to maximize the performance of your system, enble Top Performance.

• Load Fail-Safe Defaults

Fail-Safe Defaults indicates the value of the system parameters which the system would be in safe

configuration.

• Load Optimized Defaults

Optimized Defaults indicates the value of the system parameters which the system would be in

best performance configuration.

• Set Supervisor Password

Change, set, or disable password. It allows you to limit access to the system and Setup, or just

to Setup.

• Set User Password

Change, set, or disable password. It allows you to limit access to the system.

• Save & Exit Setup

Save CMOS value settings to CMOS and exit setup.

• Exit Without Saving

Abandon all CMOS value changes and exit setup.

8S661FXM-RZ Motherboard

- 22 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Standard CMOS Features

Date (mm:dd:yy)

Time (hh:mm:ss)

Fri, Jan 9 2004

22:31:24

Item Help

Menu Level}

Change the day, month,

} IDE Primary Master

} IDE Primary Slave

} IDE Secondary Master

} IDE Secondary Slave

[None]

year

<Week>

Sun. to Sat.

Drive A

Drive B

Floppy 3 Mode Suport

[1.44M, 3.5"]

[None]

[Disabled]

<Month>

Jan. to Dec.

<Day>

1 to 31 (or maximum

allowed in the month)

Halt On

[All, But Keyboard]

Base Memory

Extended Memory

Total Memory

640K

127M

128M

<Year>

1999 to 2098

higf: Move Enter: Select

F5: Previous Values

+/-/PU/PD: Value F10: Save

F6: Fail-Save Defaults

ESC: Exit F1: General Help

F7: Optimized Defaults

Date

The date format is <week>, <month>, <day>, <year>.

Week

Month

Day

From Sun. to Sat., determined by the BIOS and for display only.

From Jan. to Dec.

From 1st to 31st (or the maximum allowed in the month)

From Year 1999 to 2098

Year

Time

The times format in <hour> <minute> <second>. The time is calculated based on the 24-hour

military-time clock. For example, 1 p.m. is displayed as 13:00:00.

IDE Primary Master, Slave / IDE Secondary Master, Slave

The category identifies the types of hard disk from drive C to F that has been installed in the

computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type

automatically detects HDD type.

Note that the specifications of your drive must match with the drive table. The hard disk will not work

properly if you enter improper information for this category.

If you select User Type, related information will be asked to enter to the following items. Enter the

information directly from the keyboard and press <Enter>. Such information should be provided in the

documentation form your hard disk vendor or the system manufacturer.

Cylinder

Head

Precomp

Number of cylinders

Number of heads

Write precomp

Landing Zone Landing zone

Sector

Number of sectors

If a hard disk has not been installed, select NONE and press <Enter>.

- 23 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

Drive A / Drive B

The category identifies the types of floppy disk (drive A and drive B) installed in the computer.

None

No floppy disk is installed

360K, 5.25"

1.2M, 5.25"

5.25 inch PC-type standard drive; 360K byte capacity.

5.25 inch AT-type high-density drive; 1.2M byte capacity

(3.5 inch when 3 Mode is Enabled).

720K, 3.5"

1.44M, 3.5"

2.88M, 3.5"

3.5 inch double-sided drive; 720K byte capacity

3.5 inch double-sided drive; 1.44M byte capacity.

3.5 inch double-sided drive; 2.88M byte capacity.

Floppy 3 Mode Support (for Japan Area)

Disabled

Drive A

Drive B

Both

Normal Floppy Drive. (Default value)

Enable Drive A 3 Mode support.

Enable Drive B 3 Mode support.

Enable both Drive A and B 3 Mode support.

Halt on

The category determines whether the computer will stop if an error is detected during power up.

All Errors

No Errors

Whenever the BIOS detects a non-fatal error the system will stop.

The system boot will not stop for any error that may be detected and you

will be prompted.

All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other

errors. (Default value)

All, But Diskette

The system boot will not stop for a disk error; it will stop for all other errors.

All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all

other errors.

Memory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed

in the system.

The value of the base memory is typically 512K for systems with 512K memory installed on

the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.

ExtendedMemory

The BIOS determines how much extended memory is present during the POST.

This is the amount of memory located above 1 MB in the CPU's memory address map.

8S661FXM-RZ Motherboard

- 24 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced BIOS Features

Item Help

Menu Level}

Select Boot Device

First Boot Device

Second Boot Device

Third Boot Device

Boot Up Floppy Seek

Password Check

[Floppy]

[HDD-0]

[CDROM]

[Disabled]

[Setup]

[Enabled]

[AGP]

Priority

[Floppy]

Boot from floppy

CPU Hyper-Threading^#

Init Display First

[LS120]

Boot from LS120

[HDD-0]

Boot from First HDD

[HDD-1]

Boot from Second HDD

higf: Move Enter: Select

F5: Previous Values

+/-/PU/PD: Value F10: Save

F6: Fail-Save Defaults

ESC: Exit F1: General Help

F7: Optimized Defaults

"#" This option appears only when the Intel Pentium^®4 processor you install on the system supports

the Hyper-Threading Technology.

First / Second / Third Boot Device

Floppy

LS120

HDD-0~3

SCSI

CDROM

ZIP

USB-FDD

USB-ZIP

Select your boot device priority by Floppy.

Select your boot device priority by LS120.

Select your boot device priority by HDD-0~3.

Select your boot device priority by SCSI.

Select your boot device priority by CDROM.

Select your boot device priority by ZIP.

Select your boot device priority by USB-FDD.

Select your boot device priority by USB-ZIP.

USB-CDROM Select your boot device priority by USB-CDROM.

USB-HDD

LAN

Select your boot device priority by USB-HDD.

Select your boot device priority by LAN.

Select your boot device priority by Disabled.

Disabled

Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is

40 tracks 720K, 1.2M and 1.44M are all 80 tracks.

Disabled

BIOS will not search for the type of floppy disk drive by track number. Note

that there will not be any warning message if the drive installed is 360K.

(Default value)

Enabled

BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note

that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are

- 25 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

Password Check

Setup

The system will boot but will not access to Setup page if the correct password

is notentered at the prompt.(Default value)

System

The system will not boot and will not access to Setup page if the correct

password is not entered at the prompt.

CPU Hyper-Threading

Disabled

Enabled

Disable CPU Hyper Threading.

Enable CPU Hyper Threading Feature. Please note that this feature is only

working for operating system with multi processors mode supported.

(Default value)

Init Display First

Select the first initation of the monitor display from AGP or PCI VGA card.

PCI

Set Init Display First to PCI.

AGP

Set Init Display First to AGP. (Default value)

8S661FXM-RZ Motherboard

- 26 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Integrated Peripherals

IDE1 Conductor Cable

IDE2 Conductor Cable

On-Chip Primary PCI IDE

On-Chip Secondary PCI IDE

AC97 Audio

[Auto]

Item Help

[Auto]

Menu Level u

[Auto]

[Enabled]

[Disabled]

[3F8/IRQ4]

[2F8/IRQ3]

[378/IRQ7]

[ECP]

Auto-detect IDE cable type

Onboard LAN device

USB Controller

[ATA66/100/133]

Set Conductor cable to

ATA66/100/133

USB Legacy Support

Onboard Serial Port 1

Onboard Serial Port 2

Onboard Parallel Port

Parallel Port Mode

ECP Mode Use DMA

(80 pins)

[ATA33]

Set Conductor cable to

ATA33(40 pins)

[3]

Game Port Address

[201]

Midi Port Address

x Midi Port IRQ

[Disabled]

[10]

higf: Move Enter: Select

F5: Previous Values

+/-/PU/PD: Value F10: Save

F6: Fail-Save Defaults

ESC: Exit F1: General Help

F7: Optimized Defaults

IDE1 Conductor Cable

Auto

BIOS autodetects IDE1 conductor cable .(Default Value)

ATA66/100/133

Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE

device and cable is compatible with ATA66/100/133).

Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and

cable is compatible with ATA33).

ATA33

IDE2 Conductor Cable

Auto

BIOS autodetects IDE2 conductor cable. (Default Value)

ATA66/100/133

Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure your IDE

device and cable is compatible with ATA66/100/133).

ATA33

Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and

cable is compatible with ATA33).

On-Chip Primary PCI IDE

Enabled

Disabled

Enable onboard 1st channel IDE port. (Default value)

Disable onboard 1st channel IDE port.

On-Chip Secondary PCI IDE

Enabled

Disabled

Enable onboard 2nd channel IDE port. (Default value)

Disable onboard 2nd channel IDE port.

AC97 Audio

Enabled

Disabled

Enable onboard AC'97 audio function. (Default value)

Disable this function.

- 27 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

Onboard LAN device

Enabled

Disabled

Enable Onboard LAN function. (Default value)

Disable this function.

USB Controller

Enabled

Enable USB Controller. (Default value)

Disable USB Controller.

Disabled

USB Legacy Support

Enabled

Disabled

Enable USB Legacy Support.

Disable USB Legacy Support. (Default value)

Onboard Serial Port 1

Disabled

3F8/IRQ4

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

Auto

Disable onboard Serial port 1.

Enable onboard Serial port 1 and address is 3F8. (Default value)

Enable onboard Serial port 1 and address is 2F8.

Enable onboard Serial port 1 and address is 3E8.

Enable onboard Serial port 1 and address is 2E8.

BIOS will automatically setup the port 1 address.

Onboard Serial Port 2

Disabled

Disable onboard Serial port 2

3F8/IRQ4

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

Enable onboard Serial port 2 and address is 3F8.

Enable onboard Serial port 2 and address is 2F8. (Default value)

Enable onboard Serial port 2 and address is 3E8.

Enable onboard Serial port 2 and address is 2E8.

Auto

BIOS will automatically setup the port 2 address.

Onboard Parallel port

Disabled

Disable onboard LPT port.

378/IRQ7

278/IRQ5

3BC/IRQ7

Enable onboard LPT port and address is 378/IRQ7. (Default Value)

Enable onboard LPT port and address is 278/IRQ5.

Enable onboard LPT port and address is 3BC/IRQ7.

Parallel Port Mode

SPP

EPP

ECP

Use Parallel port as Standard Parallel Port.

Use Parallel port as Enhanced Parallel Port.

Use Parallel port as Extended Capabilities Port. (Default Value)

ECP+EPP

Use Parallel port as ECP & EPP mode.

ECP Mode Use DMA

This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected.

Set ECP Mode Use DMA to 1.

Set ECP Mode Use DMA to 3. (Default value)

8S661FXM-RZ Motherboard

- 28 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Game Port Address

Disabled

201

8209

Disable this function.

Enable gameport and set gameport address to 201. (Default Value)

Enable gameport and set gameport address to 209.

Midi Port Address

Disabled

300

330

Disable this function.(Default Value)

Enable midiport and set midiport address to 300.

Enable midiport and set midiport address to 330.

Midi Port IRQ

Set Midi Port IRQ to 5.

Set Midi Port IRQ to 10. (Default Value)

Power Management Setup

ACPI Suspend Type

Soft-Off by PWR_BTTN

System After AC Back

IRQ [3-7, 9-15], NMI

ModemRingOn

[S1(POS)]

[Off]

[Enabled]

[Disabled]

Item Help

Menu Level u

[S1]

Set suspend type to

Power On Suspend under

ACPI OS

PME Event Wake Up

Power On by Keyboard

Power On by Mouse

Resume by Alarm

x Month Alarm

x Day (of Month)

x Time (hh:mm:ss)

[Disabled]

[S3]

Set suspend type to

Suspend to RAM under

ACPI OS

higf: Move Enter: Select

F5: Previous Values

+/-/PU/PD: Value F10: Save

F6: Fail-Save Defaults

ESC: Exit F1: General Help

F7: Optimized Defaults

ACPI Suspend Type

S1(POS)

S3(STR)

Set ACPI suspend type to S1. (Default Value)

Set ACPI suspend type to S3.

Soft-off by PWR_BTTN

Off

Once a user presses the power button, the system will be turned off.

(Default Value)

Suspend

Once a user presses the power button, the system will enter

suspend mode.

- 29 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

System after AC Back

Off

When AC-power back to the system, the system will be in "Off" state.

(Default Value)

When AC-power back to the system, the system will be in "On" state.

LastState

When AC-power back to the system, the system will return to the Last state

before AC-power off.

IRQ [3-7, 9-15], NMI

Disabled

Disable this function.

Enabled

Enable this function. (Default value)

ModemRingOn

Disabled

Disable Modem Ring on function.

Enabled

Enable Modem Ring on function. (Default Value)

PME Event Wake Up

Disabled

Disable this function.

Enabled

Enable PME Event Wake up. (Default Value)

Power On by Keyboard

Any Key

Set Keyboard power on by any key.

Password

Input password (from 1 to 8 characters) and press Enter to set the Keyboard

Power On Password.

Disabled

Disable this function. (Default Value)

Power On by Mouse

Enabled

Enable Power On by Mouse function.

Disable this function. (Default Value)

Disabled

Resume by Alarm

You can enable Resume by Alarm and key in month/date/time to turn on system.

Disabled

Enabled

Disable this function. (Default Value)

Enable alarm function to POWER ON system.

If RTC Alarm Lead To Power On is Enabled.

Month Alarm :

NA, 1~12

Day (of Month) :

Time ( hh: mm: ss) :

0~31

(0~23) : (0~59) : (0~59)

8S661FXM-RZ Motherboard

- 30 -

Download from Www.Somanuals.com. All Manuals Search And Download.

PnP/PCI Configurations

PCI 1 IRQ Assignment

PCI 2 IRQ Assignment

PCI 3 IRQ Assignment

[Auto]

Item Help

Menu Level}

Device(s) using this

INT:

Display Cntrlr

-Bus 1 Dev 0 Func 0

higf: Move Enter: Select

F5: Previous Values

+/-/PU/PD: Value F10: Save

F6: Fail-Save Defaults

ESC: Exit F1: General Help

F7: Optimized Defaults

PCI 1 IRQ Assignment

Auto

Auto assign IRQ to PCI 1. (Default value)

Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.

3,4,5,7,9,10,11,12,14,15

PCI 2 IRQ Assignment

Auto

Auto assign IRQ to PCI 2. (Default value)

Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.

3,4,5,7,9,10,11,12,14,15

PCI 3 IRQ Assignment

Auto

Auto assign IRQ to PCI 3. (Default value)

Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.

3,4,5,7,9,10,11,12,14,15

- 31 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

PC Health Status

Reset Case Open Status *

Case Opened *

[Disabled]

Item Help

Menu Level}

VCORE

DDR2.5V

1.71V

4.99V

[Disabled]

Don't reset case

open status

+3.3V

3.29V

+12V

11.73V

27° C

Current CPU Temperature

Current CPU FAN Speed

Current SYSTEM FAN Speed

[Enabled]

Clear case open status

and set to be Disabled at

next boot Disabled

at next boot

4821 RPM

0 RPM

higf: Move Enter: Select

F5: Previous Values

+/-/PU/PD: Value F10: Save

F6: Fail-Save Defaults

ESC: Exit F1: General Help

F7: Optimized Defaults

Reset Case Open Status *

Disabled

Enabled

Don’t reset case open status. (Default value)

Clear case open status at next boot.

Case Opened *

If the case is closed, Case Opened will show "No".

If the case have been opened, Case Opened will show "Yes".

If you want to reset "Case Opened" value, enable Reset Case Open Status and save

CMOS, your computer will restart.

Current Voltage (V) VCORE / +3.3V / DDR2.5V / +12V

Detect system’s voltage status automatically.

Current CPU Temperature

Detect CPU Temp. automatically.

Current CPU/SYSTEM FAN Speed (RPM)

Detect CPU/SYSTEM Fan speed status automatically.

"*" Only for 8S661FXM-RZ Rev. 1.1

8S661FXM-RZ Motherboard

- 32 -

Download from Www.Somanuals.com. All Manuals Search And Download.

MB Intelligent Tweaker (M.I.T.)

Configure DRAM Timing

x Cas Latency Setting

x DRAM RAS Active Time

x DRAM RAS Precharge Time

x DRAM RAS to CAS Delay

CPU Clock Ratio

[Auto]

2.5T

Item Help

Menu Levelu

[AUTO]

Configure DRAM

Timing automatically

[10X]

Linear Frequency Control [Disabled]

[Normal]

Configure DRAM

Timing by manual

x CPU Clock (MHz)

x DRAM Clock (MHz)

AGP/PCI Clock Control

x AGP Clock (MHz)

x PCI Clock (MHz)

100

AUTO

[AUTO]

Warning: Wrong DRAM

Timing may make

AUTO

system can't boot.

Clear CMOS to overcome

wrong Timing issue

higf: Move Enter: Select

F5: Previous Values

+/-/PU/PD: Value F10: Save

F6: Fail-Save Defaults

ESC: Exit F1: General Help

F7: Optimized Defaults

Configure DRAM Timing

Auto

BIOS will automatically setup the DRAM Timing by DRAM SPD data.

(Default value)

Manual

This item allows user to set DRAM Timing manually.

CAS Latency Setting

2T/2.5T/3T

Auto

Set CAS Latency to 2T/2.5T/3T (Default value is 2.5T).

BIOS will automatically detect CAS Latency.

DRAM RAS Active Time

4T/5T/6T/7T/8T/9TSet DRAM RAS Active Time to 4T/5T/6T/7T/8T/9T. (Default value:6T)

DRAM RAS Precharge Time

3T/2T/4T/5T

Set DRAM RAS Precharge time to 2T/3T/4T/5T . (Default value:3T)

DRAM RAS to CAS Delay

3T/2T/4T/5T

Set DRAM RAS to CAS Delay to 3T/2T/4T/5T. (Default value:3T)

CPU Clock Ratio

This setup option will automatically assign by CPU detection.

For Willamette CPU:

8X~23X default: 14X

For C-Stepping P4:

8X,10X~24X default: 15X

For Northwood CPU:

12X~24X default: 16X

The option will display "Locked" and read only if the CPU ratio is not changeable.

Linear Frequency Control

Disabled

Enabled

Disable this function. (Default value)

Enable this function.

- 33 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

CPU Clock (MHz)

100~355

Select CPU Clock to 100MHz~355MHz.

If you use FSB400 Pentium 4 processor, please set "CPU Clock" to 100MHz.If you use FSB533

Pentium 4 processor, please set "CPU Clock" to 133MHz. If you use FSB800 Pentium 4

processor, please set "CPU Clock" to 200MHz.

Incorrect using it may cause your system broken. For power End-User use only!

DRAM Clock (MHz)

Please set DRAM Clock according to your requirement.

If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 200. If you use DDR333

DRAM module, please set "DRAM Clock(MHz)" to 333.

Incorrect using it may cause your system broken. For power End-User use only!

AGP/PCI Clock Control

AUTO

Set AGP/PCI clock automatically. (Default Value)

Manual

Set AGP/PCI clock manually.

M Incorrect using it may cause your system broken. For power End-User use only!

AGP Clock (MHz)

Please set AGP Clock according to your requirement.

Incorrect using it may cause your system broken. For power End-User use only!

PCI Clock (MHz)

Please set PCI Clock according to your requirement.

Incorrect using it may cause your system broken. For power End-User use only!

Top Performance

}

Standard CMOS Features

Advanced BIOS Features

Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Integrated Peripherals

Top Performance

Power Management Setup

PnP/PCI Configurations

Disabled.........................[n]

Set User Password

Save & Exit Setup

Exit Without Saving

Enabled..........................[ ]

PC Health Status

Frequency/Voltage Control

ESC: Quit

higf: Select Item

ENTER: Accept

F10: Save & Exit Setup

hi: Move

F8: Q-Flash

ESC: Abort

Time, Date, Hard Disk Type...

If you wish to maximize the performance of your system, enable "Top Performance."

Disabled Disable this function. (Default Value)

Enabled Enable Top Performance function.

"Top Performance" will increase H/W working speed. Different system configuration (both H/W

component and OS) will effect the result. For example, the same H/W configuration might not run

properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not

perform enough, the reliability or stability problem will appear sometimes, and we will recommend you

disabling the option to avoid the problem as mentioned above.

8S661FXM-RZ Motherboard

- 34 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Load Fail-Safe Defaults

}

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Frequency/Voltage Control

Exit Without Saving

ESC: Quit

higf: Select Item

F8: Q-Flash

F10: Save & Exit Setup

Load Fail-Safe Defaults

Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum

system performance.

Load Optimized Defaults

}

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

PnP/PCI Configurations Load Optimized DefaultSset(YU/sNe)r?PNassword

PC Health Status

Save & Exit Setup

Frequency/Voltage Control

Exit Without Saving

ESC: Quit

higf: Select Item

F8: Q-Flash

F10: Save & Exit Setup

Load Optimized Defaults

Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically

detects.

Set Supervisor/User Password

}

Standard CMOS Features

Top Performance

Load Fail-Safe Defaults

}

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Enter Password:

PnP/PCI Configurations

PC Health Status

Save & Exit Setup

Frequency/Voltage Control

Exit Without Saving

ESC: Quit

higf: Select Item

Load Fail-Safe Defaults (Y/N)? N

F8: Q-Flash

F10: Save & Exit Setup

Change/Set/Disable Password

When you select this function, the following message will appear at the center of the screen to assist you

in creating a password.

- 35 -

BIOS Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the password.

Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not

enter a password.To disable password, just press <Enter> when you are prompted to enter password.

A message "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the

password is disabled, the system will boot and you can enter Setup freely.

The BIOS Setup program allows you to specify two separate passwords:

SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS

Setup program function. When enabled, the Supervisor password is required for entering the BIOS

Setup program and having full configuration fields, the User password is required to access only basic

items.

If you select "System" at "Password Check" in Advance BIOS Features Menu, you will be prompted

for the password every time the system is rebooted or any time you try to enter Setup Menu.

If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only

when you try to enter Setup.you try to enter Setup.

Save & Exit Setup

}

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Save to CMOS and EXIT (Y/N)? Y

Set User Password

Save & Exit Setup

Exit Without Saving

Frequency/Voltage Control

ESC: Quit

higf: Select Item

F8: Q-Flash

F10: Save & Exit Setup

Save Data to CMOS

Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS.

Type "N" will return to Setup Utility.

Exit Without Saving

}

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Type "Y" will quit the Setup Utility without saving to RTC CMOS.

}

PnP/PCI Configurations

Quit Without SavingS(eYt/NU)s?erNPassword

Save & Exit Setup

Type "N" will return to Setup Utility.

}

PC Health Status

Frequency/Voltage Control

Exit Without Saving

ESC: Quit

higf: Select Item

F8: Q-Flash

F10: Save & Exit Setup

Abandon all Data

Type "Y" will quit the Setup Utility without saving to RTC CMOS.

Type "N" will return to Setup Utility.

8S661FXM-RZ Motherboard

- 36 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Revision History

Chapter 3 Install Drivers

Install Drivers

Pictures below are shown in Windows XP

Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the

driver CD-title will auto start and show the installation guide. If not, please double click the

CD-ROM device icon in "My computer", and execute the setup.exe.

INSTALL CHIPSET DRIVER

This page shows the drivers that need to be installed for the system. Click each item to install the

driver manually or switch to the

to install the drivers automatically.

Massage: Some device drivers will restart your

system automatically. After restarting your

system the "Xpress Install" will continue to install

other drivers.

The "Xpress Install" uses the"Click and Go" technology to install the drivers automatically. Just select

the drivers you want then click the "GO" button. The

by itself.

will execute the installation for you

We recommend that you install all components in the list.

Click "GO".

- 37 -

Driver Installation

Download from Www.Somanuals.com. All Manuals Search And Download.

Driver install finished!! you have to reboot

system!!

Item Description

n SIS AGP Driver

AGP interface driver for SiS series chipset.

n SIS 661FX VGA Driver

VGA driver for VGA integrated SiS 661FX chipset.

n USB Patch for WinXP

This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP.

n SiS PCI Lan Driver

SiS Series Lan driver.

n C-Media AC97 Audio Driver

Audio driver for C-Media AC97 codec chipset.

n SIS USB 2.0 Driver

USB2.0 driver for SiS series chipset.

If your CD doesn't have SiS^®USB2.0 driver, please download the USB2.0 driver

from Microsoft^®website (www.micros o f t.com) for USB2.0 devices support.

Please also note that Microsoft^®USB2.0 driver is currently supported by Windows

XP and Windows 2000 only.

Once we get the latest SiS^®USB2.0 driver for Windows 98 and Windows ME, we will

put the driver on GIGABYTE website asap. (http://www.gigabyte.com.tw).

For USB2.0 driver support under Windows XP operating system, please use Windows

Service Pack. After install Windows Service Pack, it will show a question mark "?" in

"Universal Serial Bus controller" under "Device Manager". Please remove the question mark

and restart the system (System will auto-detect the right USB2.0 driver).

8S661FXM-RZ Motherboard

- 38 -

Download from Www.Somanuals.com. All Manuals Search And Download.

- 39 -

Driver Installation

Download from Www.Somanuals.com. All Manuals Search And Download.

—

Taiwan

—

The Netherlands

Gigabyte TechnologyCo., Ltd.

Giga-Byte Technology B.V.

Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien,

Taiwan, R.O.C.

Address: Verdunplein 8 5627SZ, Eindhoven, The Netherlands

Tel: +31 40 290 2088

Tel: 886 (2) 8912-4888

NLTech.Support:0900-GIGABYTE(0900-44422983, 0.2/M)

BE Tech.Support: 0900-84034 ( 0.4/M)

Fax: +31 40 290 2089

Fax: 886 (2) 8912-4003

Tech. Support:

http://t w .g i ga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support (Sales/Marketing issues):

http://ggts.gigabyte.com.t w /nontech.asp

Website: http://www.gigabyte.com.tw

Tech. Support:

http://nz.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support (Sales/Marketing issues):

http://ggts.gigabyte.com.t w /nontech.asp

Website: http://www.giga-byte.nl

—

USA

G.B.T. INC.

—

China

Address: 17358 Railroad St, City of Industry, CA 91748.

Tel: 1 (626) 854-9338

NINGBO G.B.T. Tech. Trading CO., Ltd.

Tech. Support:

Fax: 1 (626) 854-9339

http://cn.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support (Sales/Marketing issues):

http://ggts.gigabyte.com.t w /nontech.asp

Website: http://www.gigabyte.com.cn

Beijing

Tech. Support:

http://www.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support (Sales/Marketing issues):

http://ggts.gigabyte.com.t w /nontech.asp

Website: http://www.giga-byte.com

Tel:86-10-82856054, 86-10-82856064, 86-10-82856094

Fax: 86-10-82856575

—

Germany

G.B.T. Technology Trading GmbH

Tel:49-40-2533040

Chengdu

Tel:86-28-85236930

49-01803-428468 (Tech.)

Fax: 86-28-85256822

Fax: 49-40-25492343 (Sales)

49-01803-428329 (Tech.)

GuangZhou

Tel:86-20-87586273

Tech. Support:

Fax: 86-20-87544306

http://de.giga-b y t e.co m /TechSupport/ServiceCenter.htm

Non-Tech. Support (Sales/Marketing issues):

http://ggts.gigabyte.com.t w /nontech.asp

Website: http://www.gigabyte.de

Shanghai

Tel:86-21-64737410

Fax: 86-21-64453227

Shenyang

—

Japan

Tel: 86-24-23960918, 86-24-23960893

Wuhan

Nippon Giga-Byte Corporation

Website: http://w w w .g i g a b y t e .co.j p

Tel: 86-27-87854385, 86-27-87854802

Fax: 86-27-87854031

—

U.K

Xian

G.B.T. TECH. CO. LTD.

Tel:86-29-5531943

Tel:44-1908-362700

Fax: 86-29-5539821

Fax: 44-1908-362709

Tech. Support:

http://uk.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support (Sales/Marketing issues):

http://ggts.gigabyte.com.t w /nontech.asp

Website: http://uk.giga-byte.com

8S661FXM-RZ Motherboard

- 40 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Freezer UFAN 400 NF User Manual
Indesit Washer IWE 7125 User Manual
Ingersoll Rand Power Screwdriver QS1L User Manual
Jenn Air Oven 8112P212 60 User Manual
John Deere Lawn Mower PC21882 User Manual
JVC Flat Panel Television 0205MKH VT VT User Manual
JVC Home Theater System CA UXP7R User Manual
Kenmore Range Electric Range User Manual
Kenwood Car Amplifier X700 5 User Manual
Klipsch Speaker AW 650 User Manual