InStep Stroller SS100 User Manual

Keep this manual for future reference. If you sell this stroller or  
give it away, make sure you give this manual to the new owner.  
Ask them to read instructions completely.  
SATURN STROLLER  
Operating Instructions  
Important:Read and follow these Safety Rules and Assembly Instructions before operating stroller. If you  
have any questions concerning the safe use of this product, contact InSTEP, LLC at 1-800-242-6110, M-F,  
Safety Rules:  
WARNING: Failure to follow these warnings and assembly instructions could result in  
serious injury or death.  
WARNING: Immediately discard any plastic wrapping.  
WARNING: Never allow children to fold, assemble or disassemble the stroller.  
WARNING: Maximum weight capacity for the stroller is 50 lbs. or 22.7 kg. Excessive weight may cause a  
hazardous, unstable condition if this load is exceeded. Maximum height of the child shall not  
exceed 35" or 89 cm.  
WARNING: Never place child in stroller with their head forward and feet rearward unless the child is in  
an approved infant car seat and it is mounted correctly to the stroller using the specially  
designed car seat adapter bar. See step 9 in the instruction manual.  
WARNING: Avoid serious injury from falling or sliding out. Always use seat belt.  
WARNING: Never leave child unattended.  
WARNING: Never use this stroller with roller skates or in-line skates.  
WARNING: Never allow stroller to be used as a toy or allow children to give rides to others.  
WARNING: Never use stroller if it becomes damaged.  
WARNING: Always be aware of traffic around you when walking.  
WARNING: Always engage brakes when you stop or when you let go of handle.  
WARNING: Do not put or hang things on the canopy or handle. Accessories or parcels placed in or on  
the stroller may cause it to become unstable.  
WARNING: Maximum weight for objects in bottom basket is 5 lbs. or 2.2 kg. Excessive weight may cause  
a hazardous, unstable condition.  
WARNING: To avoid burns, never put hot liquids in the parent or child tray. To prevent tipping over do not  
place more than 2 lbs. or 1 kg on either parent or child tray.  
WARNING: Child may slip into leg openings and strangle. Never use in a reclined carriage position  
unless waist and shoulder straps have been readjusted.  
WARNING: Care must be taken when folding and unfolding the product to prevent finger entrapment.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2. RearWheel Assembly  
A3  
B1  
B3  
Turn stroller onto its side. Grasp rear wheel in one  
hand, slide wheel’s axle into hole in rear of frame  
(Figure B1). Check to see that the wheel is properly  
inserted by pulling on the wheel firmly, the wheel  
should not come off if fully inserted/locked. Repeat  
for other side. To release wheel push up on axle  
release lever while pulling off wheel (Figure B2).  
Side Latches  
To engage rear brakes:  
Step lightly on the side brake levers or rear brake  
bar to engage brakes. To disengage, lift up on  
brake levers or bar (Figure B3).  
A4  
Storage Latch  
Rear  
Axle  
Rear  
Frame  
Axle Release Lever  
Axle Release Lever  
Rear Brake Bar  
Brake Levers  
B2  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3. FrontWheel Assembly  
C1  
C2  
D
Turn stroller upright onto its rear wheels, then tip  
stroller back so the handlebar is down on the  
ground and the front is up. Slide the front wheel  
assembly onto the front wheel post, push until the  
wheel assembly locks into place (Figure C1).  
Check to see that the wheel assembly is properly  
inserted by pulling on the wheel firmly. To remove  
wheel push on release tab and pull off wheel  
(Figure C2).  
Front Wheel  
Post  
To lock the front wheel from turning:  
Push down on the front wheel’s lock lever to keep  
the front wheel from turning. To unlock, lift up on  
lever (Figure C3).  
Front Wheel  
Assembly  
Step 4. Front Fender Assembly  
While stroller is still upright on its rear wheels, align  
the fender’s tabs with the holes in the front frame  
and press on. Insert the #4 – 16mm screws into the  
hole and tighten with a Phillips screwdriver, repeat  
for the other 3 holes (Figure D).  
WARNING: To avoid burns, never put hot  
liquids in the parent or child tray. To prevent  
tipping over do not place more than 2 lbs. or  
1 kg on either parent or child tray.  
Front Wheel  
Release Tab  
C3  
Front Wheel  
Lock Lever  
Fender  
Tab  
Front Frame  
Fender Holes  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5. Installing ChildTray  
E
F
H
Position tray as shown with the levers open, when  
aligned close both levers to lock in place (Figure E).  
To remove open both levers and pull off. Note the  
child tray can not be used when using the car seat  
adapter bar.  
Child Tray  
Levers  
Step 6. Installing Parent’s Convenience  
Tray  
Snap parent tray onto the handlebar aligning the  
tray’s holes with the handlebar’s knobs (Figure F).  
Step 7. Adjusting Handle Height  
While pushing both handle buttons in, rotate  
handle to the desired height (Figure G).  
Step 8. Proper use of Seat Belt,  
Shoulder Straps, and Recline  
WARNING: Avoid serious injury from falling  
or sliding out. Always use seat belt.  
1. Place child in stroller seat. Make sure T-shield is  
between the child’s legs.  
Parent Tray Hole  
2. When child is seated, place shoulder straps over  
the child’s shoulders and clip onto the waist ring.  
3. Buckle the T-shield buckles into the side waist  
buckles. Adjust the waist and shoulder straps  
for snug fit (Figure H).  
Handlebar Knob  
G
Shoulder  
Straps  
Handle Adjust  
Button  
Waist  
Strap  
Handle Adjust  
Button  
T-shield  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
To recline seat:  
I
To fully recline, unhook buckle on back of the seat  
(Figure I).  
To place seat in upright position, push seat forward  
and reconnect buckle located on back of seat.  
Extra webbing can be placed in the rear pouch so  
it does not hang down and drag.  
Rear Recline  
Strap  
To adjust the recline position, adjust the buckle on  
the strap.  
WARNING: Child may slip into leg openings  
and strangle. Never use in a reclined car-  
riage position unless the T-shield and  
shoulder straps have been readjusted to  
the new seat position.  
Black  
Spacers  
J1  
Step 9. Using the infant car seat  
adapter bar  
Car Seat  
Adapter Bar  
When the car seat adapter bar is properly installed  
onto “The Everyday Stroller,it is designed to be  
used with the following infant car seat brands and  
models. Graco® Snug Rider,® Century® Avanta,  
®
Evenflo® On My Way.®  
®
The trade names and trademarks of Graco,  
Spring Lock  
Buttons  
Century,® and Evenflo® are the trademarks of their  
respective companies.  
WARNING: Failure to follow these warnings  
and assembly instructions could result in  
serious injury or death.  
Textile  
Cover  
The front child tray must be removed  
before using the infant car seat  
adapter bar.  
J2  
Lift up the textile cover of the seat’s side tubes.  
Insert adapter bar with buttons on the inside. Push  
in the spring buttons while pushing adapter bar into  
the seat’s side tubes end (Figure J1). Release but-  
ton and continue pushing in the bar until the spring  
buttons lock into the holes located on the inside of  
the seat’s side tubes. Pull on bar to make sure it is  
locked in place.  
Adapter Bar  
Under Seat  
Basket  
To remove adapter bar push in spring buttons  
with your finger or pen and pull out the bar. Store  
adapter bar in the under seat basket when not in  
use (Figure J2).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting infant car seat onto the  
adapter bar  
J3  
J4  
J6  
Note: The stroller seat should be in the full recline  
position with the recline strap unbuckled prior to  
placing car seat on. With the car seat adapter bar  
installed on the stroller, position the infant car seat  
(WITHOUT CHILD) so its mounting notch aligns  
with bar. The car seat will be mounted rearward  
facing towards the handle of the stroller. Push  
firmly down on the car seat so the bar is in contact  
with the car’s seat locking device or mounting  
notch (Figure J3). Note: Some car seats do not lock  
onto the bar, they just rest on the adapter bar.  
Using the stroller’s recline strap reverse the strap  
and insert the recline strap around the tubing and  
slide into the car seat’s retention slots on both  
sides of car seat and buckle (Figure J4). Cinch tight  
the recline strap around the car seat to anchor in  
place (Figure J5). Check to make sure the car seat  
is mounted securely by rocking the car seat front  
to back. The car seat should not wobble. If it does  
check and adjust the tension of the recline/restraint  
strap and make sure that the car seat mounting  
notch is resting on the adapter bar (Figure J6).  
Car Seat Locking  
Mounting Notch  
Adapter  
Bar  
Strap Around  
Frame Tube  
Only – Do  
Not Wrap  
Over Canopy  
Tube  
DO NOT CHECK THE CAR SEAT MOUNTING  
TO THE STROLLER WITH YOUR CHILD IN THE  
CAR SEAT.  
Car Seat  
Retention  
Slot  
WARNING: Car seats may fall forward if the  
strollers retention strap is not used. Do not  
use the car seat without cinching tight the  
retention/recline strap around the car seat.  
NOTE:  
J5  
For the Century  
Avanta models,  
remove the  
2-black spacers  
from the car seat  
adapter bar.  
Car Seat  
Retention  
Slot  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you are unable to securely attach the infant car seat, discontinue use and contact our Customer  
Service representative.  
Please refer to the infant car seat manufacturers instruction’s and warnings for harnessing your  
child in the car seat.  
Do not lift stroller by using the infant car seat handle.  
Care and Maintenance  
Check fasteners  
After one hour of use, check all fasteners to make sure they are secure. Adjust if necessary.  
Periodically check the stroller to ensure that it is in good operating condition.  
To clean seat and canopy:  
If light cleaning is required, use a soft cloth with warm water and mild soap then air dry. Do not put into  
washing machine. Do not put in dryer. DO NOT BLEACH.  
To clean frame:  
Wipe using a soft cloth with warm water and mild soap. Air dry. DO NOT USE polish or abrasives.  
WARNING: If you have any questions concerning the safe use of this product, please contact  
InSTEP LLC before using:  
2425 Enterprise Drive, Suite #900  
Mendota Heights, MN 55120 U.S.A.  
Tel:1-800-242-6110  
563736 12/01  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia TV DVD Combo NS 32DD220NA16 User Manual
Jet Tools Sander 22 44 Pro 3 User Manual
JVC Camcorder GR AX810 User Manual
KEF Audio Home Theater System HTB2 User Manual
Kenwood Speaker KS 908HT User Manual
Kicker Stereo System QS602 User Manual
Kingsford Charcoal Grill CBT1126W User Manual
KitchenAid Blender 5KSB52XXXX User Manual
KitchenAid Blender KSB580CR0 User Manual
KitchenAid Range KERC508 User Manual