Fisher Price R4743 User Manual

R4743  
Newborn  
0-3 months  
and up to 4,5kg (10 lbs)  
Infant  
3-6 months  
and up to 9kg (20 lbs)  
Toddler  
6 months+  
and up to 11kg (25 lbs)  
WARNING  
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.  
One-Time Assembly  
Temperature Guide  
Typical water temperature should be between 32°C and 38°C.  
This product has a temperature guide located on the bathtub floor  
to help gauge the right water temperature for baby. Use of this  
temperature guide should not replace testing the water temperature  
with your hand or elbow before placing baby in this product.  
Bases  
Note: If water temperature is too cold (below 28°C) or too hot  
(58°C). no image will appear on the temperature guide.  
Water temperature is too cold for baby.  
Add warm water.  
Bathtub  
• Match the number on each base to the number near each  
socket on the bathtub. Fit the bases to the bathtub.  
• Insert a screw into each base and tighten with a Phillips  
screwdriver. Do not over-tighten.  
Water temperature is just right for baby.  
Water temperature is too hot for baby.  
Add cold water.  
3
Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.  
Malaysia: Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd. (993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana  
Golf Country Resort, 47410 PJ. Tel: +603-3341 9052.  
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.  
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.  
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.  
PRINTED IN MEXICO  
R4743a-0726  
4
Newborn  
Infant  
Clips  
Clips  
Infant Insert  
• Fit the clips near the rounded end of the sling to the notch  
on each side of the bathtub opposite the plug. Fit the clips  
on the other end of the sling to the remaining notches on the  
other end of the bathtub.  
• Fit the infant insert in the bathtub.  
• Fit the bathtub to the sink, or place on a flat surface.  
• Fit the bathtub to the sink, or place on a flat surface.  
• Fit the plug into the hole in the bottom of the bathtub. Fill  
the bathtub with as little water as possible to bathe baby.  
ALWAYS test water temperature in the product with your  
hand or elbow before placing baby in this product.  
Note: This product includes a temperature guide to help gauge  
the water temperature (see Temperature Guide section).  
• Fit the plug into the hole in the bottom of the bathtub. Fill  
the bathtub with as little water as possible to bathe baby.  
ALWAYS test water temperature in the product with your  
hand or elbow before placing baby in this product.  
Note: This product includes a temperature guide to help gauge  
the water temperature (see Temperature Guide section).  
• Carefully place baby in the bathtub.  
• Carefully place baby on the sling.  
5
Toddler  
Storage  
Infant Insert  
Bottom View  
• Pull apart the sides of the bathtub and remove the infant insert.  
• Before storing, drain, clean, rinse and dry all items.  
• Turn the hook on the bathtub to hang it up for storage.  
• Place the bathtub in a larger bathtub, or place on a flat surface.  
• Fit the plug into the hole in the bottom of the bathtub. Fill  
the bathtub with as little water as possible to bathe baby.  
ALWAYS test water temperature in the product with your  
hand or elbow before placing baby in this product.  
Note: This product includes a temperature guide to help gauge  
the water temperature (see Temperature Guide section).  
• Carefully place baby in the bathtub.  
6

Black Decker FS2400DC User Manual
Black Decker VP100 User Manual
Briggs Stratton 124L00 User Manual
Caframo EZ PowerPak 902 User Manual
Carrier 48HJD005 007 User Manual
Century EXPRESS EB 4 User Manual
Dakota Digital LAT NR162 User Manual
Energizer LR14 User Manual
Fujitsu Printer 12V User Manual
Honeywell HZ 617C User Manual