• • • •
• • • •
• • • •
• • • •
PowerTouch 350
User Guide
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Advanced features..................................................25
Predialing a number.........................................................25
Redialing a number..........................................................25
Dialing without the handset.............................................25
Dialing with a Live dial pad ............................................26
Timing a call....................................................................26
Using Flash......................................................................26
Privacy/Extension in use .................................................26
Services..................................................................27
Activating a service .........................................................27
Deleting a service ............................................................28
Prompts and indicators...........................................29
Display prompts...............................................................29
Indicators .........................................................................30
Helpful hints...........................................................31
Warranty and repairs .......................................................33
Cleaning the display ........................................................33
General inquiries .............................................................33
Regulatory information ...................................................33
Index ......................................................................34
ii
Introduction
Don’t stop what you’re doing
to talk
If you need both hands to do
something, use the handsfree key.
Then just talk normally on the
speakerphone while you go on with
your task.
Your telephone has gone modular!
Now you can change features simply
by removing one module and sliding
in another.
Let the display be your guide
Follow the display on the module for
instructions to use features and handle
calls. Your telephone has an 8-line
display, with enlarged numbers.
†
See if you have a message
You’ve been expecting a call but you
had to run an errand. When you get
back, look at your phone: if the light is
flashing, a caller has left a message for
you.
Store the numbers of your
friends right in the phone
Once you’ve added numbers to the
Directory, calling is easy. Instead of
hunting for your phone book, look in
the Directory and dial the number with
the touch of a key.
†
Requires voice message service (light
indicator service may not be available in
all areas).
See your telephone company about
subscribed services.
1
Don’t worry if your line’s tied
up* ††
Your telephone display lets you know
who that second caller is while you’re
on the phone.
Identify callers by preferred
name*
The phone company knows her as
Mrs. Smith, but you call her “Mom”.
If you’ve got her number and name
in the Directory, you’ll see “Mom” on
the display whenever she calls.
Recognize a private number*
You know your caller has a private
number before you even answer
because your telephone has a special
ring for private callers. The display
also shows you that the number is
private.
See who’s called*
You’re out. Check the Callers List to
see who’s called, then call back at your
convenience. Or, if you’re busy, check
the display to see who’s calling. Then
decide if you want to answer.
††
Requires Caller ID on Call Waiting
* Requires Caller ID service.
service (not available in all areas).
2
Unpacking the phone
After unpacking, keep the boxes.
Check to see that you have these parts:
If any part is missing, contact the
outlet where you got the telephone.
handset
module
base
2 line cords
handset cord
stand
number card
and lens
language plate
regulatory sheet
power adaptor
3
Description - Base
˙ puts the call on
hold (page 12).
Handsfree/Mute
activates the speaker
and microphone so
you can listen and talk
without lifting the
handset (page 25).
Light shows when you have
calls or messages (page 30).
≈ allows you to
connect to network features,
such as call waiting (page 26).
© always
ends an active call
(page 12).
¥ lets you access
eight options to customize
your telephone (page 14).
¶ lets you
adjust the receiver, speaker,
and ringer volume (page 13,
29, and 31).
4
Description - Module
£ shows you the Services
list, where you can access your
subscribed services (page 27).
ç lets you access a list of
people who called (page 16).
Display gives you instructions
and information about calls and
features (page 29).
Softkeys let you activate
the commands that they
point to on the display
(page 14, 16, 20, 25, 27).
∆ lets you
store and access up
to 50 numbers and
names (page 20).
Contrast gives
you eight settings to
adjust the display.
” and ’ let you move up
and down any list such as
Options, Callers,
Directory, Redial, and
Services (page 14, 16, 21,
25, 27).
§ lets you
copy phone numbers
(and names) into your
Directory (page 18,
21).
• lets you print a
page of a service, or the list or
an item for Callers or
‘ and “ let you move between
pages when you are using your
services (page 27). ‘ also deletes
characters (page 17, 21) and “
also adds a space in a name (page
Directory. It requires the
† lets you access a
list of the last five numbers
you dialed (page 25).
printer option: see your
telephone company to order
the cable (RJ11/RS232).
21).
5
Installation
2. Connect the handset cord
Turn the telephone over. Plug one end
of the handset cord into the jack
Note: Before inserting or removing a
module, unplug all cords to the
telephone. The telephone will not
work without a module.
marked with
on the bottom of the
telephone. Then, route the handset
cord down through the channel below.
Installing on a desk
1. Insert the module
Remove the clip from the connector.
Slide the module all the way into the
base from the right-hand side.
6
3. Lower the stand into the
slots
Hold the stand so that the square
opening is on the lower right.
Note: To remove the stand:
Reverse the process in steps 3 and 4.
With one hand holding the phone and
the other hand holding the stand, pull
them apart, increasing pressure
steadily until the stand pops off.
5. Connect the line cord
Plug one end of the long (6 ft) line cord
into the jack next to the handset jack
on the bottom of the telephone,
marked with 1
.
6. Connect the fax machine,
modem or answering machine
(optional)
Plug one end of the second line cord
(not supplied) into the jack above the
handset jack on the bottom of the
For a high viewing angle:
Lower the stand so that the two tabs fit
into the lower slots on the bottom of
telephone, marked with 2
.
the telephone (marked with
).
7. Attach the power adaptor
Plug the power adaptor into the power
jack on the bottom of the telephone,
For a low viewing angle:
the stand so that the two tabs fit into
the upper slots on the bottom of the
Lower
marked with
.
telephone (marked with
).
4. Lock the stand into place
Press down hard on the top edge of the
stand until the locking tabs click.
7
8. Route the cords
11. Insert the number card
Route the line cords and power
adaptor cord through the channels in
the stand.
Write your telephone number on the
card and place it into the slot on the
telephone. Bend the clear plastic lens
into the slot, over the number card.
Note: Keep the plastic lens away
from small children.
12. Insert the language plate
Snap the plate over the keys above the
dial pad.
9. Plug in the cords
Plug the power adaptor into a wall
outlet.
Plug one line cord into one telephone
wall jack. Plug the second line cord
into the fax machine, modem, or
answering machine.
10. Attach the handset
Plug the other end of the handset cord
into the handset and place the handset
on the telephone.
8
2. Connect the handset cord
Turn the telephone over. Plug one end
of the handset cord into the jack
Installing on the wall
1. Insert the module
Remove the clip from the connector.
Slide the module all the way into the
base from the right-hand side.
marked with
on the bottom of the
telephone. Then, route the handset
cord down through the channel below.
3. Connect the line cord
Plug one end of the short (8 in.) line
cord into the jack next to the handset
jack on the bottom of the telephone,
marked with 1
.
9
4. Connect the fax machine,
modem or answering machine
(optional)
Plug one end of the second line cord
(not supplied) into the jack above the
handset jack on the bottom of the
7. Mount the telephone
Press the telephone against the wall-
mount plate until the hooks on the
plate align with the wall-mount slots
on the telephone. Slide the telephone
down until it is secure.
telephone, marked with 2
.
5. Attach the power adaptor
Plug the power adaptor into the power
jack on the bottom of the telephone,
marked with
.
6. Plug in the cords
Plug the power adaptor into a wall
outlet.
Plug the short line cord into the
telephone wall jack. Plug the second
line cord into the fax machine,
modem, or answering machine.
8. Attach the handset
Plug the other end of the handset cord
into the handset and place the handset
on the telephone.
10
9. Insert the number card
Checking your telephone
Write your telephone number on the
card and place it into the slot on the
telephone. Bend the clear plastic lens
into the slot, over the number card.
Whenever the telephone has been
without power for a long period of
time, the display asks you to select a
language when power returns. Follow
the directions on the display to select
one of the languages.
If you’ve missed the prompt for
language, don’t worry. See page 14 for
another way to change the language.
The telephone also runs a test to
ensure that the line cord is connected.
If the test fails, the display prompts
you to check the phone cord ( ).
You can now use your telephone. But
read on to learn more about your
telephone’s special features. If you
want to customize your phone, see
Personalizing your phone on page 14.
Note: Keep the plastic lens away
from small children.
10. Insert the language plate
Snap the plate over the keys above the
dial pad.
11
Basic features
Making a basic call
For other ways of handling calls
(including predialing), see page 25.
To place a call on hold
1. Make or answer a call.
2. Press ˙.
To dial a number
3. Hang up the handset.
1. Lift the handset.
4. Lift the handset of this phone or an
extension phone to retrieve the
call.
2. Enter the number using the dial
pad.
Note: If a call is held for more than
15 minutes, it is automatically
reconnected. If the handset is off the
telephone, the caller can hear you
again. If the handset is on the
To answer a call
1. Lift the handset.
To end a call
telephone, the call is released.
1. Hang up the handset or
press ©.
12
Adjusting the speaker volume
Making volume adjustments
When you are on Handsfree, press the
left or right side of ¶
to turn the speaker volume up or down.
If you hold either end of the key down,
you can scroll through all the volume
settings. The speaker volume setting
stays at the new level between calls.
Adjusting the ringer volume
Without lifting the handset, press the
left side of ¶ until
appears on the display.
To turn the ringer on or up, press the
right side of the volume bar without
lifting the handset. The telephone
rings while you adjust the volume so
you can hear how loud it is. The new
volume level is saved automatically.
Adjusting the receiver volume
When you are on a call, you can turn
the volume of what you hear up or
down by pressing the right or left side
of ¶. The receiver
volume returns to normal when the
handset is put back on the telephone.
13
Personalizing your phone
1. Display language
Change to the other language (Spanish
or English).
Your telephone has eight options to
personalize your telephone. The
display shows four options at a a time.
To preview the entire list, keep
pressing ’ and ”.
2. Time and date
Enter the time and date. The setting is
updated with each incoming call.
To select an option
3. Ring tone
Choose one of three ring tones.
1. Press ¥ (recessed key).
2. Press the option number (for
4. Call timer
example, press
pad mode).
to set the dial
Turn the timer on or off. When on, it
times each call automatically (if a
service is not active).
OR
5. Dial pad mode
Press ’ or ” to scroll through the
Turn Live dial pad on or off. When on,
the telephone automatically dials out
any number you press on the dial pad.
When off, you can predial or view
numbers on the display before you dial
them.
list, one option at a time. Then
press the
softkey to check
the option setting.
3. Press the appropriate softkeys to
change the setting.
6. Clear Message Waiting
If you get the
prompt on the display when there
aren’t any messages, turn the display
prompt and the telephone light off.
4. Press the
softkey.
5. Press © or ¥ at
any time to leave the list.
14
7. Area code
Locking the Directory
Enter up to three area codes so that
calls can be dialed from the Callers
List without the area code.
Once you've accumulated a lot of
items in the Directory, you can lock it
so that items won’t be accidently
erased.
8. Callers List mode
Select the type of calls to be logged in
the Callers List. Choose between no
calls, all calls, or unanswered calls.
Note: You cannot change or add
items in a locked Directory.
To lock the Directory
Display icons
1. Press ¥.
2. Press ˙.
You are in the Options list.
3. Press ¥ . The display shows that
the Directory is locked.
To unlock the Directory
1. Press ¥.
2. Press ˙.
3. Press £ . The display shows that
the Directory is unlocked.
15
Callers List
Your telephone logs up to 25 incoming
calls which are stored in the Callers
List.
Note: The Callers List remains emp-
ty until you receive calls AND until
you subscribe to calling line identifi-
cation service from your local tele-
phone company.
To view the Callers List
1. Press ç to see the Callers
List heading.
2. When there are new callers, press
’ to see the first new caller in the
list.
OR
The Callers List tells you who called
while you were out or unavailable, and
lets you dial the callers back from the
list.
Press the
the last caller you viewed the last
time you were in the Callers List.
softkey to see
3. Press ’ or ” to move between
If the number matches a number that
you've programmed with a name in the
Directory, the Callers List will show
that name.
callers.
4. Press ç, the
softkey, or © at any time
to leave the Callers List.
From the Options list, the Callers List
can be programmed to record all
incoming calls, no calls, or only
unanswered calls. Press ¥,
¡ , and follow the instructions on the
display.
Note: © also hangs up
if you're on a call.
16
Dialing from the Callers List
Changing a number in the
Callers List before dialing
If you frequently have to delete an area
code to dial a number, enter the area
code in the Options list. Press
If you call a number from the Callers
List and you don't get connected, you
may have to edit the number (for
example, the number may be long
distance and you may have to add "1").
¥,
, and follow the
instructions on the display. After you
do this, that area code will appear in
brackets, but won’t be dialed out.
To dial from the Callers List
1. Press ç.
2. Use ’ and ” to find the caller.
To edit a number in the
Callers List
3. Press the
softkey or the
Handsfree key, or lift the handset.
1. Press ç.
Note: If you dial any numbers
after the call connects, those
numbers won’t appear on the
display.
2. Press ’ until you find the caller
you wish to call.
3. If you just want to add digits, you
can skip this step. If you want to
delete digits first, press the
Note: When you finish the call,
you return to the same number in
the Callers List.
softkey to begin editing.
4. Use the dial pad to add digits.
Press the
softkey or “ to
erase one digit to the right of the
cursor. Press the
softkey or ‘ to erase one digit to
the left of the cursor.
17
Caution: Callers List does not
save changes. If you plan to call
the number again, copy it to the
Directory before dialing it (see the
next procedure).
5. If no name is displayed, you are
prompted to enter one. If you
don’t want to save a name, go to
step 6. To enter a name, use the
dial pad. (The letters are on the
keys. For special characters, see
the chart on page 21.)
5. Press the
softkey or the
Handsfree key, or lift the handset
to make the call.
6. Press the
softkey.
Copying from the Callers List Deleting from the Callers List
To copy to the Directory
To delete one caller
1. Press ç.
1. Press ç.
2. Press ’ until you find the caller
2. Press ’ until you find the caller
you wish to copy.
you wish to delete.
3. If it requires editing, press the
softkey and follow the
3. Press the
4. Press the
softkey.
softkey again to
instructions in the procedure
before this one.
confirm the action.
To delete all callers
1. Press ç.
2. Press the
4. Press §. If a name was
displayed, skip steps 5 and 6.
softkey.
3. Press the
confirm.
softkey to
18
Icons in the Callers List
You are in the Callers List.
You answered the call when it
came in.
You did not answer the call
when it came in.
You were on another call when
this call came in.
You have returned the call from the
Callers List.
The area code has been
stripped off.
The party called four times.
19
Directory
If the number includes external
access codes or personal
identification numbers, enter a
pause between the two numbers.
The Directory lets you store up to 50
names and numbers in alphabetical
order so that you can dial numbers
directly from the Directory. The
Directory sorts the names by the first
character.
Press the
softkey for a
pause. (The
softkey appears
after you’ve entered the first digit
of the number.) If ≈ is
required for a custom calling
feature, press ≈ at the
appropriate place in the number.
You can press these keys without
activating these functions on the
telephone.
For consistency, always enter your
Directory names in the same order
(last name first, or first name first). If
you don't enter a name, the item is
sorted by the telephone number. All
telephone number items are at the
beginning of the Directory.
Adding to the Directory
4. Press the
softkey.
To add a name and number
5. If you don’t want to save a name,
go to step 6. Press the key with the
desired letter until that letter
1. Press ∆ if you are not
already in the Directory.
appears on the display. (The letters
are on the keys. For special
characters, see the chart on page
21.) The name can have up to 16
characters, including spaces.
2. Press the
softkey.
3. Enter the telephone number using
the dial pad. The number can have
up to 24 digits.
20
Press the
to move to the next letter or add a
space.
softkey or “
To copy from the display
1. When a number is on the display,
press §.
For example, to enter Ruth: press
If a name was on the display, skip
steps 2 and 3.
, “, ¡ ¡ , “, ¡ , “,
2. If no name is displayed, you are
prompted to enter one. If you don’t
want to save a name, go to step 3.
To enter a name, use the dial pad.
(The letters are on the keys. For
special characters, see the chart on
this page.)
Note: You don’t have to press “
or the
next letter is on a different key.
Press the softkey to
softkey if the
switch between upper and lower
case.
Press the
softkey or ‘
3. Press the
softkey.
to erase a character.
To copy from Redial
6. Press the
softkey. The
1. Press †.
display shows the new item.
2. Press ’ or ” to find the number
Chart for special characters
you want to copy.
The following characters aren't shown
on your dial pad keys.
3. Press §.
If a name was on the display, skip
steps 4 and 5.
Key
Character
Æ
21
4. If no name is displayed, you are
prompted to enter one. If you don’t
want to save a name, go to step 5.
To enter a name, use the dial pad.
(The letters are on the keys. For
special characters, see the chart on
page 21.)
•
•
•
Press the
listing (the number, the name, or
both).
softkey to edit a
If the display shows after the
number, it means the number is
longer than the display.
Press ∆, the
softkey, or © to get out of
the Directory.
5. Press the
softkey.
Finding items in the Directory
Note: © also hangs up if
To find items in the Directory
you’re on a call.
•
Press ∆ to see the
Directory list heading.
Changing a Directory item
To change a Directory item
•
Press ’ to scroll down and ” to
scroll up the Directory, one listing
at a time.
1. Press ∆.
2. Find the name and number you
want to change by pressing the first
letter of the name or ’, or ”.
•
•
Press and hold ’ or ” to
continuously scroll down or up the
Directory.
3. Press the
4. To skip the number, go to step 5.
Use the softkey or ‘ to
softkey.
Press the appropriate dial pad key
to see the listings that start with a
particular letter. (For example,
takes you to the first 'J' listing; use
’ for the second 'J' listing;
erase digits. Use the dial pad to add
digits.
takes you to the first 'K' listing.)
5. Press the
softkey.
22
6. If you don’t want to change the
name, go to step 7. To change the
name, press the
4. Press © or hang up to end
the call.
Note: When you finish the call,
you are no longer in the Directory.
softkey or ‘ to erase letters. Use
the dial pad and the
softkey or “ to add letters. (The
letters are on the keys. For special
characters, see the chart on page
21.)
Deleting Directory items
To delete individual items
1. Press ∆.
Press the
softkey to
2. Find the name and number you
want to delete by pressing the first
letter of the name or ’, or ”.
switch between upper and lower
case.
7. Press the
softkey.
3. Press the
softkey.
Dialing Directory items
4. Press the
confirm.
softkey again to
To dial from the Directory
The display shows the next listing
in the Directory.
1. Press ∆.
2. Find the name and number you
want to call by pressing the first
letter of the name or ’, or ”.
5. Press ∆, the
softkey, or © to get out of
the Directory.
3. Press the Handsfree key or the
softkey, or lift the handset.
Note: © also hangs up if
you’re on a call.
Note: If you dial any numbers
after the call connects, those
numbers won’t appear on the
display.
23
To delete all items
1. Press ∆.
2. Press the
softkey.
softkey to
3. Press the
confirm the action.
4. Press ∆, the
softkey, or © to get out of
the Directory.
Note: © also hangs up if
you’re on a call.
Display icons
You are in the Directory.
You pressed ≈ or
≈ has been programmed
into a number.
You pressed the
softkey
or a pause (which can be up to 3 sec-
onds) has been programmed into a
number.
24
Advanced features
If you dial any numbers after the
call connects, those numbers
won’t appear on the display.
Predialing a number
Predial lets you view the number first,
before you dial it. It helps prevent
dialing errors. Predial does not work
when the Live dial pad option is on
(see page 14).
To delete a redial number
1. Press †.
2. Press ’ or ” to find the number.
To predial a number
3. Press the
softkey twice.
1. Enter the number using the dial
pad. Use the
or ‘ to correct errors.
softkey
Display icons
2. Lift the handset, or press the
softkey or Handsfree key.
You are in the Redial list.
Redialing a number
† shows you a list of the last
five numbers you called.
Dialing without the handset
With Handsfree you don't have to
interrupt the task at hand to talk on the
telephone. You can also use the Mute
feature to talk to someone else in the
room without the caller hearing.
To redial a number
1. Press †.
2. Press ’ or ” to find the number.
To dial using Handsfree
1. Press the Handsfree key.
2. Enter the number.
3. Lift the handset, or press the
softkey or Handsfree key.
25
3. If you want to talk to someone else
in the room without the caller
hearing you, press the Handsfree
key again. The Handsfree light
flashes. You can still listen to the
caller.
Timing a call
You can turn the call timer on, if you
want to automatically time the length
of your calls, or you can turn it off.
Press ¥,
, and follow the
instructions on the display. The timer
begins counting when you answer, or
5 seconds after you dial. The timer
does not run when a service is active.
Each time you press the Handsfree
key, you switch between
Handsfree and Mute.
Using Flash
Dialing with a Live dial pad
You use ≈ mainly for
subscribed services, such as call
waiting and three-way calling. Follow
the procedures given to you by your
telephone company when you
subscribe to these features. Wherever
it says to press the hook-switch or
receiver button, press ≈
instead.
You can make the telephone dial out
and go on Handsfree as soon as you
press a dial pad key. Do this by
turning Live dial pad on: press
¥,
, and follow the
instructions on the display.
To dial with a Live dial pad
1. Enter the number using the dial
pad. The number is dialed
automatically and the call goes on
Handsfree.
Privacy/Extension in use
appears on the
display when someone uses an
extension telephone. The light remains
on until the other person hangs up.
2. Whenever you want privacy, lift
the handset.
26
Services
The large display on your telephone
offers you the advantages of full-
screen services, much like an
Activating a service
To activate a service
automatic banking machine. You can
subscribe to enhanced telephone
company features and services such as
home banking, catalog shopping,
movie libraries, and restaurant guides.
You can also subscribe to telephone
network services such as network
voice mail.
1. Press £.
2. Press ’ and ” to move the cursor
to the service you want.
3. Press the
softkey to
activate the service next to
the cursor.
4. Once you have connected to the
service, follow the instructions.
The Services list shows you the
services that you subscribe to. Before
you can select a service, you must load
it into your telephone. For information
on loading a service, please contact
your telephone company or service
provider.
5. After a Services session, press the
softkey or © to
leave the list.
Some services may be available by
dialing them directly, and do not need
to appear in your Services list. You
can store the number for this kind of
service in your Directory.
Note: Some telephone features (such
as call timer) may be disabled when
you are using a service.
27
Display icons
You are in the Services list.
Deleting a service
You may be able to delete a service
when you no longer use it or when you
want to replace it.
“‘
Press “ or ‘ for more
information.
To delete a service
1. Press £.
Service information is being
downloaded to your telephone.
2. Press ’ and ” to move the cursor
to the service you want.
3. Press the
softkey.
4. If you change your mind, press the
softkey.
5. Press the
softkey or
© to leave the list.
Note: You may not be able to delete
some services.
28
Prompts and indicators
Display prompts
Your telephone display gives you
instructions and information. If you
want to know what to do about a
particular display prompt, look it up
here. The prompts are listed in
alphabetical order.
The telephone now has power. Press a
softkey to change the language for the
display.
Check for new messages at your Voice
Mail center. Press “ to see other
display prompts.
For other helpful hints, see page 31.
or
A line cord ( ) is not connected
properly.
The caller has requested that the name
(or number) not be shown. Your
telephone rings differently for private
calls.
You are in a full Directory or trying to
copy an item to a full Directory. Delete
an item that you no longer use before
adding or copying an item.
You have pressed † and the
list is empty. Or, you have just deleted
all items in the list.
You have pressed ∆ and the
list is empty. Press the
to add items.
softkey
You can’t hear incoming calls. To turn
the ringer on again, press the right side
of ¶.
29
or
Telephone light
Feature
Light
The telephone company is unable to
provide the name or number of the
caller.
Call is on Light flashes.
hold
Display shows
.
X
Extension Light is on.
is in use Display shows
XX new calls have been added to the
Callers List since you last checked it.
Press ç to access the list.
.
Message is Light flashes.
waiting
Display shows
Indicators
.
The telephone light and Handsfree/
Mute light let you know the status of
calls and messages. The tables below
show what the lights mean and also
what the display shows in different
situations.
Visual
ringing
Light flashes while
ringing. Display shows
name and number (if
available).
If you've checked your messages and
the display still shows that there is a
message waiting, turn off the prompt
and the telephone light using the
Options list.
Press ¥, , and follow the
instructions on the display.
Handsfree/Mute light
Feature
Light
Call is on
Handsfree/Mute light is
Handsfree on.
Handsfree Handsfree/Mute light
call is
muted
flashes. Display shows
.
After you check your messages, it
takes a few seconds for the prompt and
light to turn off.
30
Helpful hints
The telephone wobbles.
Callers are not identified on
the display.
Let the telephone ring at least twice
before answering. Make sure you
subscribe to calling line identification
services from your local telephone
company.
Make sure the cords are routed
properly through the stand, as
indicated in the Installation section.
Check that the stand has been properly
snapped in.
The display works but you
can't hear a dial tone.
The display is blank and
Make sure the line cord is connected in
the appropriate jack. If the problem
persists, have your wall jack checked:
the wiring may need to be repaired.
ringer volume is very low.
Make sure the power adaptor is
plugged in a working electrical outlet.
You cannot dial a number in
the Callers List.
If the number of the caller is unknown,
you cannot return the call.
The cursor doesn't move when
you're adding to the
Directory.
The name or number may be too long.
Names can be no longer than 16
characters and numbers can be no
longer than 24 characters.
Or, the number may require an area
code. Press the
softkey to
edit the number, then press the
softkey.
The display is in the alternate
language.
You can change to the other language
by pressing ¥, , and the
appropriate softkey.
You cannot hear a caller or be
heard.
Increase the receiver or speaker
volume. Make sure the handset cord is
inserted securely into the jack. If the
Handsfree light is flashing, the call is
muted: press the Handsfree key.
You cannot place a call.
This telephone requires tone service.
31
The display is blank.
The Redial list shows more
than the number you dialed.
If you dial using the dial pad, the
Redial list stores all digits you dial,
even those you dial after the call
connects. If you want just the number
to be stored, dial using the Directory or
Callers List.
Your telephone provides basic
telephone service during a power
failure. You can use the dial pad and
receive calls, but the other keys and
the display do not work until power
returns.
The time and date are wrong.
If the power has been out, the next
incoming call will reset the time and
date. (You must subscribe to calling
line identification service.) To
My voice mail password shows
up in the Redial list.
If you dial your voice mail number
using the dial pad, all digits you dial,
including your password, are stored in
the Redial list. Delete the number in
your Redial list.
manually reset the time and date, press
¥,
, and follow the
instructions on the display.
The ringer sounds different.
When a call comes in from a private
name or number, the ringer uses a
special tone.
To keep your voice mail password a
secret, program the telephone number
for your voice mail service into the
Directory. Do not program your
password. Then, always dial the voice
mail number using the Directory.
When you dial your password, it won’t
show up in the Redial list.
Numbers don’t show on the
display.
If you dial using the Directory, Callers
List, or Redial, numbers you press on
the dial pad will not appear on the
display. (This keeps passwords from
appearing on the display.) If you dial
using the dial pad, every number you
press will appear.
What is a softkey?
There are three keys on the left and
right side of the display. They do
different things, depending on the
label next to them on the display.
32
Warranty and repairs
General inquiries
When you ship your telephone to a
Aastra Telecom Service Center, you
are responsible for shipping charges.
If you’ve read the guide and you have
questions, call 1-800-574-1611 in the
USA and in Canada.
Cleaning the display
Regulatory information
Use only a soft cloth soaked in
isopropyl alcohol to clean the display.
The Load Number (LN) for your
telephone is 8. The Ringer
Equivalence number (REN) is 0.7B.
Please see the bottom of your
telephone or the Regulations sheet for
more regulatory and safety
information.
Warning: Do NOT use a dry cloth: it
might scratch the surface. Do NOT use
ketone, acetone, toluene, or xylene:
they may damage the coating.
33
Index
Viewing items 16
Calls on hold 12
Changing
a Callers item 17
a Directory item 22
Chart for special characters 21
Check phone cord 29
Cleaning the display 33
Contrast key 5
Alternate language 14
Answering a call 12
Answering machine,
connecting 7, 9
Area code 15
Arrow keys 5
Backspace key 5
Copy key 5
Cords, routing 8
Customer service 33
Call is on hold 30
Call timer 14, 26
Callers key 5
Callers List 16–19
Answer mode 15
Changing an item 17
Copying to the Directory 18
Deleting items 18
Dialing a number 17
Dialing problems 31
Editing items 17
Icons 19
Date and time 14
Problems 32
Deleting items
Callers List 18
Directory 23
Redial number 25
Services 28
34
Desk mounting 6
Dial again See Redial
Dialing a number 12
Problems 31
Display keys See Softkeys
Display services 27
Down-arrow key 5
Directory 20–24
Adding items 20
Changing items 22
Copying from Redial 21
Deleting items 23, 24
Dialing a number 23
Finding items 22
Locking and unlocking 15
Problems 31
Enlarged numbers 1
Erasing items
Callers List 18
Directory 23
Redial number 25
Services 28
Extension in use 26, 30
Fax machine, connecting 7, 9
Finding items
Directory full 29
Directory is empty 29
Directory key 5
Callers List 16
Directory 22
Display 5
Redial list 25
Cleaning 33
Flash, in a Directory number 20
Flash key 4, 26
Enlarged numbers 1
Icons 15, 19, 24, 25, 28
Language 14
Overlay 8, 11
Problems 31
Prompts list 29
Goodbye key 4
Overlay 8, 11
35
Handset, connecting 8, 10
Handset cord, connecting 6, 9
Handsfree calls 25, 26
Handsfree light 30
Handsfree/Mute key 4
Helpful hints 31–32
Hold key 4
Line cord, connecting 7, 9
List of parts 3
Live dial pad 14, 26
Load number 33
Locking the Directory 15
Message Waiting 14, 29, 30
Microphone muted 30
Modem, connecting 7, 9
Module, installing 6, 9
Mounting the phone
on a desk 6
Overlay 8, 11
Holding a call 12
Icons 15, 19, 24, 25, 28
In English 29
Inquiries 33
on a wall 9
Installation 6–11
Module 6, 9
Mute key See Handsfree key
Stand 7
Names in the Directory 20
New Callers 30
Key description 4–5
Number card 8, 10
Numbers in the Directory 20
Language choice 14, 31
Language plate 8, 11
Left-arrow key 5
Lights on the phone 4, 30
36
Options 14
Area code 15
Problems 31–32
Callers List 31
Dialing 31
Call timer 14
Callers List mode 15
Dial pad mode 14
Display language 14
Message Waiting prompt 14
Ring tone 14
Directory 31
Display 31
Display language 31
Redial list 32
Ring tone 32
Time and date 14
Options key 4
Overlay 8, 11
Time and date 32
Voice mail security 32
Volume 31
Prompts 29, 30
Parts list 3
Password, voice mail 32
Pause, in a Directory number 20
Plugging in the cords 8, 10
Power adaptor, connecting 7, 10
Predialing 25
Receiver volume 13
Problems 31
Redial 25
Deleting items 25
Problems 32
Print key 5
Redial key 5
Printer option 5
Private name 29
Private number 29
Redial List is empty 29
Regulatory information 33
Removing the stand 7
Repair information 33
37
Right-arrow key 5
Ring tone 14
Subscribed services 2, 26, 27
Symbols See Display icons
Symbols See Icons
Problems 32
Ringer Equivalence number 33
Ringer is OFF 29
Ringer volume 13
Telephone
Description 4, 5
Lights 4, 30
Security
Unpacking 3
Directory items 15
Voice mail 32
Service centers 33
Services 27
Time and date 14
Problems 32
Timing calls 26
Troubleshooting 31–32
Deleting 28
Selecting 27
Unknown name 29
Unknown number 29
Unpacking the phone 3
Up-arrow key 5
Services key 5
Softkeys 5, 32
Speaker volume 13
Problems 31
Special characters 21
Stand
Viewing items
Callers List 16
Directory 22
Redial list 25
Connecting 7
Removing 7
Routing cords 8
38
Voice mail password 32
Volume
Problems 31
Receiver 13
Ringer 13
Speaker 13
Volume key 4
Wall mounting 9
Warning, cleaning the
display 33
39
|