IBM ThinkVision™ L170p Monitor
L170p
English
User's Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
First Edition (April/2003)
Note: For important information, refer to the Monitor Safety and Warranty manual that comes with
this monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety (Read first) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Handling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Workplace Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting the Monitor Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Working Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Caring for your Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting your Monitor for Analog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting your Monitor for Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching on your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Device Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Windows Millennium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Windows 98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Windows 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Auto Setup (Analog Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Auto Setup for DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Auto Setup for Windows 3.1, Windows 95, Windows 98, Windows 2000
Windows NT, Windows Me or Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Manual Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
User controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
On-screen display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Display modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Product Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Further Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Notices and Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1
Download from Www.Somanuals.com. All Manuals Search And Download.
.
í
í
í
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the monitor
Product Description
The IBM ThinkVision TFT LCD L170p Color Monitor works with a computer
with a suitable on-board sub-system or Video Adapter card that can support
SXGA 1280 x 1024, XGA 1024 x 768, SVGA 800 x 600, or VGA 640 x 480 at
60 Hz.
In addition to your monitor, your option package includes the followings:
• User's Guide and Installation Files CD
• Monitor Warranty and Safety manual
• IBM ThinkVision L170p Monitor Setup Guide
• Power Cord
• AC Adapter
• IBM ThinkVision L170p Monitor
• Analog Interface Cable - Attached to Monitor
Handling Instructions
Do not support the monitor
within the screen area. The
Liquid Crystal Display is
glass and can be damaged
by rough handling or
1. Lift the monitor by placing your hands where indicated below.
excessive pressure.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Before using your monitor for the first time, remove the clear protective
film from the front of the screen.
Workplace Preparation
This section gives advice on
what you should consider
Height
Position the monitor so that the top of the screen is slightly below your eye
level when you sit at your workstation.
before you set up your monitor.
Orientation
Choose a position that gives the least reflection from lights and windows,
usually at a right angle to any windows. Position the monitor directly in front of
you so that you do not have to twist your body to use it. Tilt the monitor to a
comfortable viewing angle.
Adjusting the Monitor Position
Viewing Angle
You can tilt the screen backward and forward, swivel left or right as well as lift
up and down as shown below.
Working Practices
This section gives
advice on how you can
work comfortably and reduce
fatigue.
Rest
Take regular breaks. Vary your posture, stand up and stretch occasionally as
prolonged use of computer workstations can be tiring.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Back
Sit back in your chair and use the backrest.
Hands
Adjust the seat height so that your forearms are approximately horizontal and
your wrists are straight when using the keyboard. Your upper arms should be
relaxed with your elbows near your body.
Use a light touch on the keyboard, keeping your hands and fingers relaxed.
Allow a space in front of the keyboard to rest your wrists when not typing.
Consider using a wristpad.
Eyesight
Working with monitors, in common with any prolonged close work, can be
visually demanding. Look away from the screen periodically and have your
eyesight checked regularly.
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have
to adjust this as the lighting changes during the day. Many application
programs let you select color combinations which can help you to view in
comfort. See the User controls section on page 18 for more information.
Caring for your Monitor
Be sure to turn off the power before you perform any maintenance on the
monitor. Clean your monitor as follows:
•
•
Gently wipe the device covers and the screen with a soft cloth.
Remove finger marks and grease with a damp cloth and mild detergent;
do not use solvents or abrasives
•
Never use flammable cleaning material to clean your IBM monitor or any
other electrical apparatus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your Monitor for Analog
Be sure to read the ‘Safety
Information’ at the front of
this User Guide before
1. Turn off your computer and all attached devices.
2. Connect the signal cable to the video port on the back of your computer.
This port might be directly attached to your computer (figure A), or it
might be part of a video adapter card (figure B). The video port on your
computer or video adapter card might be blue to match the blue
connector on your monitor’s video cable.
carrying out this procedure.
3. Connect the power cord to the power port on the back of your monitor if
the power cord supplied is not attached to the monitor. Then insert the
plug into a properly grounded electrical outlet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your Monitor for Digital
1. Purchase an industry standard DVI-D cable from your local computer
supply store.
2. Turn off your computer and all attached devices.
a
3. Tilt monitor all the way forward.
4. Connect the DVI connector at the end of the signal cable to the DVI port
located on the back of the Monitor. See picture below.
Connecting DVI Cable
DVI
Cable
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect the DVI connector at the other end of the signal cable to the
DVI port located on the back of the graphics adapter. See picture below.
graphics adapter
DVI
Signal Cable
6. Connect the power cord to the power port on the back of your monitor if
the power cord supplied is not attached to the monitor. Then insert the
plug into a properly grounded electrical outlet.
7. Use the cable holder (a) to neatly organize the video and power cables.
8. Switch on the power source and your computer. To turn on the monitor,
push and release the power switch . To switch it off, push and release
the power switch again.
Switching on your Monitor
1. Switch on the power source and your computer.
2. Switch on your monitor by pushing and releasing the power switch
marked
.
To switch off your monitor, push and release the power switch again.
3. Turn on the monitor and then the computer.
4. Run AUTO SETUP by following the instructions in the Device Driver
Installation section on page 9.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Driver Installation
Use the User's Guide and Installation Files CD that comes with your monitor
to install the appropriate device driver for your operating system.
Installing the Windows XP device driver
To manually install or update the device driver for the Microsoft® Windows®
XP operating system, perform the following steps:
1. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive.
2. Click Start ꢀControl Panel ꢀAppearance & Themes and then click
the Display icon.
3. In the Display Properties window, click the Settings tab, and then click
Advanced.
4. Click the Monitor tab, and then click Properties ꢀDriver tab ꢀUpdate
Driver.
5. When the Hardware Update Wizard window opens, select “Install the
software automatically,” click Next> and then Finish to complete the
installation.
6. Close the Display Properties window.
7. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows Me device driver
To manually install or update the device driver for the Microsoft® Windows®
Millennium Edition operating system, perform the following steps:
1. Click Start ꢀSettings ꢀControl Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab, and then click
Advanced.
3. Click the Monitor tab, and then click Change ꢀSpecify the location of
the driver ꢀNext.
4. When the Update Device Driver Wizard window opens, select "Display
a list of all the drivers in a specific location, so you can select the driver
you want," and click Next>.
5. Insert the the User’s Guide and Installation Files CD into the computer
CD-ROM drive, then click Have Disk.
6. Type d:\ (change the drive letter to match your CD-ROM drive if it is not
drive D) in the Copy manufacturer's files from: box, then click OK.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click Next>, Next>, and then Finish to complete the installation.
8. Close the Display Properties window.
9. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows 2000 device driver
To manually install or update the device driver for the Microsoft® Windows®
2000 Professional operating system, perform the following steps:
1. Click Start ꢀSettings ꢀControl Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab, and then click
Advanced.
3. Click the Monitor tab, and then click Properties ꢀDriver ꢀUpdate
Driver.
4. When the Update Device Driver Wizard window opens, select "Search
for a suitable driver for my device," and click Next>.
5. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive, type d:\ (change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer's files from: box,
click Next> and then Finish to complete the installation.
6. Close the Display Properties window.
7. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows 98 device driver
Windows 98 automatically detects the new monitor and displays the Add New
Hardware Wizard window if the device driver is not already installed.
1. Insert the Device Driver and User’s Guide CD into the computer CD-
ROM drive, and click Next> twice when the Add New Hardware Wizard
window opens.
2. Click the CD-ROM drive box to install the device drivers from the CD
and then click Next>.
3. Confirm that the device driver was found on the CD, and click Next>
twice to install the device driver.
4. Click Finish to close the Add New Hardware Wizard window.
To manually install or update the device driver for the Microsoft® Windows®
98 operating system, perform the following steps:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Click Start ꢀSettings ꢀControl Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab, and then click
Advanced.
3. Click the Monitor tab, and then click Change.
4. When the Update Device Driver Wizard window opens, follow the steps
in the previous paragraph.
5. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows 95 device driver
Right-click the My Computer icon on the computer desktop and then select
Properties ꢀSystem to view the version number listed in the System
window. Perform the steps below for the appropriate version.
If you have Windows 95 Version 4.00.950A, use the following steps to
manually install or update the device driver:
1. Click Start ꢀSettings ꢀControl Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab and then click
Change Display Type.
3. In the Change Display Type window, click Change and then click Have
Disk.
4. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive, type d:\ (change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer's files from: box,
and click OK.
5. In the Select Device window, click the appropriate monitor model and
then click OK.
6. In the Change Display Type window, click Close.
7. In the Display Properties window, click OK.
8. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
If you have Windows 95 Version 4.00.950B, use the following steps to
manually install or update the device driver:
1. Click Start ꢀSettings ꢀControl Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab and then click
Advanced Properties.
3. In the Advanced Display Properties window, click the Monitor tab and
then click Change.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. In the Select Device window, click Have Disk.
5. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive, type d:\ (change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer's files from: box,
and click OK.
6. In the Select Device window, click the appropriate monitor model and
then click OK.
7. In the Advanced Display Properties window, click Close.
8. In the Display Properties window, click OK.
9. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Setup (Analog Only)
Auto Setup
When you first use your monitor you must perform Auto Setup. This
The Setup Utility
included on the setup
diskette is for displaying dot
patterns. They do not replace or
modify the display driver.
procedure sets up your monitor to process the video signals from your
computer without image discoloration or smearing. After you perform Auto
Setup, the settings are stored and used each time you turn on the monitor.
To optimise the displayed image a set-up utility is provided on the CD.
Operation of the utility is dependent on the operating system on your
computer. For correct operation locate the operating system on your
computer from the table below and follow the appropriate instructions. You
can choose to run AUTO SETUP for each operating system that you use. This
means that if you sometimes use your monitor while running any version of
Windows and sometimes also use it from within DOS (not a DOS window),
you must run AUTO SETUP for both Windows and DOS. You can run versions of
AUTO SETUP in any order.
The Auto Setup instructions
require the monitor to be warmed
up for 15 minutes. This is not
required for normal operation.
By pressing the
key, you will
have direct access to the Image
Setup control that is used during
the Auto Setup process.
Operating System
Corresponding Auto Setup procedure
DOS
Auto Setup for DOS on page 14
Windows 3.1, Windows 95,
Windows 98, Windows 2000,
Auto Setup for Windows 3.1, Windows 95,
Windows 98, Windows NT, Windows 2000,
Windows Me or Windows XP on page 15
®
Microsoft Windows NT ,
Windows Me or Windows XP
Before you begin AUTO SETUP for your computer:
1. Make sure the computer’s video mode is set in the range of the
supported screen resolution shown in the Table on page 24.
The AUTO SETUP process
only applies to the current
screen mode. When a new mode
is selected, repeat this section to
reset the monitor
You should perform AUTO SETUP for each screen mode you use.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Setup for DOS
To set up the monitor automatically in DOS, do the following:
1. Turn on the monitor first; then turn on the computer.
If the monitor is in standby
mode (STANDBY ON), it
may automatically turn off while
you are waiting for it to warm up. If
this happens, switch off the
monitor and switch it on again
after a few seconds.
If the message CHECK SIGNAL CABLEis displayed, or if nothing is
displayed, check:
•
•
•
that the video interface cable is connected properly.
the correct video adapter card is installed.
the correct supported display mode is selected for your computer.
If you are using PC-DOS/V,
change to U.S. mode by
typing ‘CHEV US’ and pressing
ENTER at the command prompt.
2. Wait approximately 15 minutes, until the monitor warms up.
3. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive.
4. Display the command prompt screen of the DOS full-screen display.
5. Type d:\ (change the drive letter to match your CD-ROM drive if it is not
drive D).
6. Type TESTPATD and press ENTER.
7. Select from the screen the number for the color or text mode you want to
set up.
8. Select from the screen the number for the video mode you want to set
up. You can repeat this process for as many of the color and video
modes as you need.
The size and diversity of the
dot pattern varies with the
screen resolution.
9. When the dot pattern appears, press the OSD Enter button
bottom of the monitor to display the initial OSD menu.
at the
10. Use an Arrow button (
then press the OSD Enter
or
) to select the Image Setup icon
button to access the function.
11. Using an Arrow button (
or
), select AUTOMATIC and press the
OSD Enter button
. This activates the AUTO SETUP procedure, which
will optimize the display settings with the provided dot-patterns.
The screen will flash off several times and you might notice small
changes to the test pattern.
12. When finished, the OSD main menu returns. Press the Exit button
to exit from the OSD.
13. Press the ESCAPE key to exit the test pattern program.
14. Type Exit at the command prompt to return to Windows.
If you use other operating systems, perform the appropriate Auto Setup for
those systems using instructions given in "Auto Setup for Windows 3.1,
Windows 95, Windows 98, Windows NT, Windows 2000, Windows Me or
Windows XP on page 15”.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Setup for Windows 3.1, Windows 95, Windows 98, Windows NT,
Windows 2000, Windows Me or Windows XP
To set up the monitor automatically in Windows 3.1, Windows 95, Windows
95, Windows 98, Windows NT, Windows 2000, Windows Me, or Windows XP,
do the following:
If the monitor is in standby
mode (STANDBY ON), it
1. Turn on the monitor first; then the computer.
may automatically turn off while
you are waiting for it to warm up.
If the message CHECK SIGNAL CABLEis displayed, or if nothing is
displayed, check:
•
•
•
that the video interface cable is connected properly.
the correct video adapter card is installed.
the correct supported display mode is selected for your computer.
2. Wait approximately 15 minutes, until the monitor warms up.
3. Drag the icon bar and tool bar, if they are displayed, to the bottom of the
screen.
4. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive.
The size and diversity of the
dot pattern varies with the
screen resolution.
5. Check the operating system installed on your computer and follow the
instructions from the table below.
Operating system installation steps
Operating
System
Step1
Step2
Step3
Step4
Windows 3.1
Open
Select
Select
Type
PROGRAM
MANAGER
FILE
RUN
D:\TESTPAT
(change the
drive letter to
match your CD-
ROM drive if it
is not drive D)
and press
Windows NT 3.5
Windows 95,
Windows 98,
Windows 2000,
Windows NT,
Windows Me or
Windows XP
Select
START
Select RUN
ENTER
6. When the test pattern appears, press the OSD Enter button
bottom of the monitor to display the initial OSD menu.
at the
Position the mouse pointer
at the bottom center of the
screen. This allows AUTO SETUP
to run properly
7. Use an Arrow button (
and press the OSD Enter button
8. Using an Arrow button ( or
OSD Enter button
will optimize the display settings with the provided test pattern.
or
) to select the Image Setup icon
to access the function.
), select AUTOMATIC and press the
. This activates the AUTO SETUP procedure, which
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The screen will dim, blink on and off several times, and you might notice
small changes to the test pattern.
To abort the AUTO SETUP function, press the ESC key.
9. When finished, the OSD main menu returns. Press the Exit button
once to exit from the OSD.
10. Press the ESC key to return to Windows.
You have completed the monitor setup for Windows. If you are using the DOS
operating system, go to Auto Setup for DOS on page 14.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Setup
Normally, you can complete the setup procedure using AUTO SETUP; however,
if your screen image is still distorted after you perform AUTO SETUP or the
Installation CD does not run on your system, perform MANUAL SETUP.
If the monitor is in standby
mode (STANDBY ON), it
might automatically turn off while
you are waiting for it to warm up.
1. Have your monitor turned on for about 15 minutes, until the monitor
warms up.
2. Display the image you most frequently use on the screen.
3. Press the OSD Enter button
the initial OSD menu.
at the bottom of the monitor to display
4. Use an Arrow button (
and press the OSD Enter button
5. Using an Arrow button ( or
press once to select Clock. Left and right arrow adjustment
or
) to select the Image Setup icon
to access the function.
), select MANUAL, press
and then
indicators become illuminated (see page 21).
6. Use the Arrow buttons to manually adjust to correct (as much as
possible) for noise in the video signal then press
changes.
to save the
7. Use an Arrow button to select Phase and press the
button.
8. Use the Arrow buttons again to tune the image to your liking.
To save, press the button two times.
9. When finished, press the Exit button
OSD.
two times to exit from the
You have completed the monitor setup.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your LCD Monitor
User controls
User control features
• Direct access controls
Icon
Control
Description
OSD
Input Change
Switches the video input source.
Inactive
Image Setup
Brightness
OSD Enter
Activates automatic image adjustment. Inactive
Directly accesses to Brightness on the
Inactive
OSD main menu.
Displays the OSD main menu.
Switches the monitor on and off.
Inactive
-
Power Switch
• Main OSD menu controls
Icon
Control
Exit
Description
OSD
Exits from menus and sub-menus
Exits the OSD.
Active
Moves the cursor to highlight icons
and other options.
Left Arrow
Right Arrow
OSD Enter
Active
Active
Active
Moves the cursor to highlight icons
and other options.
Enters menus and sub-menus and
selects the highlighted option.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
The image is already
optimized for many display
modes; however the user controls
can be used to adjust the image to
your liking.
•
•
Press the OSD Enter button to display the main OSD menu.
Use the Arrow buttons to move among the icons. Select an icon and press
OSD Enter to access that function. If there is a sub-menu, you can move
between options using the Arrow buttons, then press OSD Enter to select
that function. Use the Arrow buttons to make adjustments. Press the
button to save.
The settings are saved after
adjustment and when
exiting the OSD and will be
effective thereafter.
•
Press the Exit button to move backwards through the sub-menus and exit
from the OSD.
OSD Lock / Unlock
This feature allows you to secure the current control settings, while allowing
the user to adjust Brightness and Contrast, so that they cannot be
inadvertently changed. You can unlock the OSD controls at any time by using
the same procedure.
Push and hold the OSD Enter button for 10 seconds to Lock or to Unlock.
When locked, a “LOCKED” message will be displayed.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen display (OSD) controls
The settings adjustable with the user controls are viewed through the On-
Screen Display (OSD). Press the OSD Enter button (
) to activate the
OSD.
The LCD monitor needs
time to become thermally
Initial appearance of OSD
stable the first time you turn it on
each day. Thus, to achieve more
accurate adjustments for
parameters, allow the LCD
monitor to warm up (be On) for at
least 15 minutes before making
any screen adjustments.
Brightness/Contrast
Exit
OK
OSD functions
OSD Icon on
Main Menu
Controls and
Adjustments (Analog)
Controls and
Adjustments (Digital)
Submenu
Description
Adjusts brightness.
Same as Analog
Controls Locked
Brightness/
Contrast
Brightness
Adjusts contrast.
Contrast
Moves the screen left or right.
Controls Locked
Controls Locked
Horizontal Position
Vertical Position
Image Position
Moves the screen up or down.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Icon on
Main Menu
Controls and
Adjustments (Analog)
Controls and
Adjustments (Digital)
Submenu
Automatic
Description
Activates automatic image adjustment.
Controls Locked
Image Setup
Use the
or
button to adjust away the interference.
If satisfactory results are not obtained using the Phase
adjustment, use the Clock adjustment and then use Phase
again.
Manual
Clock
Phase
•
•
Adjusts intensity of red, green and blue.
Controls Locked
Color
Image
Properties
1. Preset Mode
•
•
•
6500K
7200K
9300K
6500K adjusts the screen more red.
7200K adjusts the screen to the default color settings.
9300K adjusts the screen more blue.
2. Custom
Increases or decreases 'red'.
Increases or decreases 'green'.
Increases or decreases 'blue'.
•
•
•
Red
Green
Blue
This monitor can accept video
signals through two different
connectors.
1 - selects D-SUB
(Analog)
2 - selects DVI-Digital
Same as Analog
Input video signal
Most desktop computers use a
D-SUB connector. Select
Digital among OSD controls
when you use DVI connector.
Shows resolution, refresh rate, and product details.
Note: This screen does not allow any changes to the
settings.
Same as Analog
Options
Information
Language
The language chosen affects
only the language of the OSD.
It has no effect on any
software running on the
computer.
Select one of the 5
languages (English,
French, Italian, German
and Spanish) to use for
the OSD.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Icon on
Main Menu
(Continued)
Controls and
Adjustments (Analog)
Controls and
Adjustments (Digital)
Submenu
Description
Adjusts menu location on the screen.
Same as Analog
Options
Menu Position
1. Default
Returns the menu position to the default settings.
2. Custom
•
•
Horizontal
Vertical
Changes the horizontal
position of OSD.
Changes the vertical position
of OSD.
Resets monitor to the origital settings.
Does not make the adjustment.
Resets the settings.
Factory Reset
•
•
Cancel
Reset
Changes button repeat rate
and menu time out setting.
Accessibility
Off - increases by 1
each time the button is
pressed.
Selects
repeating rate.
or
button
•
Button repeat
rate
Default - increases
continuously while the
button is pressed.
Slow - increases by 1
every 2 seconds while
the button is pressed.
Sets the length of time the
OSD will remain active after
the last time a button is
pressed.
Use the
button to select time
from 5 to 60 seconds.
or
•
Menu time out
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Further Information
Display modes
The display mode the monitor uses is controlled by the computer. Therefore,
refer to your computer documentation for details on how to change display
modes.
The image size, position and shape might change when the display mode
changes. This is normal and the image can be readjusted using AUTO SETUP
and the monitor controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker,
TFT technology is inherently flicker-free. If possible, configure your computer
for 1280 × 1024 addressability at 60Hz vertical refresh rate.
For the display modes listed on the next page, the screen image has been
optimized during manufacture.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
For image problems, you
may want to run AUTO
Factory Set Display Modes
Setup again before consulting to
this section. In most cases, AUTO
SETUP can fix the problems. See
Auto Setup for DOS on page 14
for details.
Horizontal
Frequency
Addressability
Refresh Rate
Analog
Digital
640 × 350
640 × 480
640 × 480
640 × 480
640 × 480
720 × 400
800 × 600
800 × 600
800 × 600
800 × 600
832 × 624
1024 × 768
1024 × 768
1024 x 768
1280 x 1024†
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 864
1152 x 870
1152 x 900
70 Hz
75 Hz
72 Hz
66 Hz
60 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
70 Hz
75 Hz
76 Hz
75 Hz
75 Hz
60 Hz
31.5 kHz
37.5 kHz
37.8 kHz
35.0 kHz
31.5 kHz
31.4 kHz
35.1 kHz
37.8 kHz
48.0 kHz
46.8 kHz
49.7 kHz
48.4 kHz
56.5 kHz
60.0 kHz
64.0 kHz
74.4 kHz
80.0 kHz
81.1 kHz
67.5 kHz
68.7 kHz
61.8 kHz
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
† Recommended
‘Note: VESA timings are as detailed in the VESA “Display Monitor Timing
Specification”. Version 1.0, Revision 0.8, dated 09/17/98.’
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Management
If your computer has
previously been used
To benefit from power management, the monitor must be used in conjunction
with a computer that implements the Video Electronics Standards Association
(VESA) Display Power Management Signalling (DPMS) Standard.
with a CRT monitor and is
currently configured to a
display mode outside the
range that the Flat Panel
monitor can display, you
may need to re-attach the
CRT monitor temporarily
until youhave re-configured
the computer, preferably to
1280 x 1024 at 60Hz.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
As an ENERGY STAR® Partner, IBM has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
For optimal performance, switch off your monitor at the end of each working
day, or whenever you expect to leave it unused for long periods during the
day.
Power
Indicator
Restoring
Operation
State
Screen
Compliance
On
Active off
Blinking green
Blinking green
Normal
Blank
Press a key or
move the mouse. *
®
ENERGY STAR
* There may be a slight delay before the picture reappears.
Product Disposal
The fluorescent lamp in the liquid crystal display contains a small amount of
mercury. Dispose of it as required by local ordinances and regulations.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to
solve it yourself. Before calling your retailer or IBM, try the suggested actions
that are appropriate to your problem.
Possible
Cause
Problem
Suggested Action
Reference
ꢁ
Remove the other
graphics adapter plugged
into one of the expansion
slot.
Connecting
yourMonitor
for Analog
section on
Computer does
not boot after
the graphics
adapter is
There is
another
graphics
adapter in the
computer
ꢁ
If the card is built-in to
the motherboard, check
your system manual for
instructions on how to
disable the built-in adapter.
installed
page 6
The screen
image is
garbled or
unusable
(rolling screen
images,
overlapping
screen images
or a blank
screen)
The display
driver is trying
to use a
setting your
monitor does
not support
Connecting
yourMonitor
for Analog
section on
ꢁ
Select the correct
monitor again.
page 6
ꢁ
Ensure that the
electrical outlet and the
monitor are both switched
on.
ꢁ
Check that the power
cord is firmly plugged into
the electrical outlet and the
power supply unit.
Connecting
yourMonitor
for Analog
section on
Screen is blank
and power
indicator is off
No power to
monitor
ꢁ
If the power cord plug
has a removable fuse,
replace it.
page 6
ꢁ
Try another power
cord.
ꢁ
Try another electrical
outlet.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Possible
Cause
Problem
Suggested Action
Reference
User
controls
section on
page 18
Screen is blank
and power
indicator is
Brightness
and Contrast
may be too
low
ꢁ
Adjust brightness and
contrast.
steady green
ꢁ
Press any key on the
keyboard or move the
mouse to restore
operation.
Power
Themonitor is
in the Power
Management
Standby state
Management
section on
page 25
ꢁ
Check the Power
Management software on
your computer
ꢁ
Check that the signal
cable is firmly connected to
the computer.
Connecting
yourMonitor
for Analog
section on
Screen is blank
and power
indicator is
Themonitor is
not receiving
a video signal
ꢁ
Check that no pins are
steady amber
bent in the signal cable
connector.
page 6
ꢁ
Press any key on the
Themonitor is
in the Power
Management
Suspend or
Off state
keyboard or move the
mouse to restore
operation.
Power
Management
section on
page 25
ꢁ
Check the Power
Management software on
your computer.
Screen is blank
and power
indicator is
Flashing green
every 0.5
Display mode
of the
computer is
outside the
range of the
monitor
Further
ꢁ
Reconfigure the
computer to use a
Information
section on
page 23
supported display mode.
second
User
ꢁ
Select Image Setup
There are
noises in the
video signal
Image appears
to be smeared
controls
section on
page 18
menu in the OSD. Then
select MANUAL to adjust
Phase/Clock settings.
User
Image appears
to be
discolored
The Color
setting may
be incorrect
ꢁ
Adjust the Color
settings.
controls
section on
page 18
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Possible
Cause
Problem
Suggested Action
Reference
ꢁ
The LCD contains over 3,900,000 thin-
A few dots are
missing,
discolored, or
inappropriately
lighted.
film transistors (TFTs). A small number of
missing, discolored, or lighted dots may be
present on the screen, which is an intrinsic
characteristic of the TFT LCD technology
and is not an LCD defect.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Further Help
If you are unable to correct the problem yourself, you may seek further help
as follows:
Call the IBM HelpCenter®.
In the US call 1-800-772-2227
In Canada (Toronto Only) call 416-383-3344
In Canada (all others) call 1-800-565-3344
If possible, stay by your
computer. Your Technical
Support Representative may wish
to go through the problem with
you during the call.
In other countries contact your dealer, retailer, or other IBM authorized
Servicer.
Before calling, please have available as much of the following information as
possible:
More help, late-breaking
news and details of the latest
accessories for these products
may be found on the worldwide
web at:
1. Model and serial number from the label on your monitor.
2. Purchase receipt.
3. Description of problem.
4. Computer type and model.
5. System configuration (hardware fitted, etc.).
6. System BIOS version number.
7. Operating System and version number.
8. Display driver version number.
9. Video Adapter Type.
accessories
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
This color monitor (Type-model 6734-Hx0) uses a 17-inch TFT LCD
Dimensions
A. Lower Position
Height :
357.1 mm (14.05 in.)
237.0 mm (9.33 in.)
344.8 mm (15.74 in.)
Depth :
Width :
B. Higher Position
Height :
Depth :
457.1 mm (17.99 in.)
237.0 mm (9.33 in.)
399.8 mm (15.74 in.)
Width :
Weight
Unpackaged:
Packaged:
5.8 Kg (12.78 lb)
7.1 Kg (15.65 lb)
Tilt / Swivel / Lift
Tilt:
– 0° / + 30°
Swivel:
Lift :
– 135° / + 135°
100 mm (stroke)
Image
Viewable Image Size:
Maximum Height:
Maximum Width:
Pixel Pitch:
432.7 mm (17.0 in.)
270.0 mm (10.6 in.)
338.0 mm (13.3 in.)
0.264 mm (.010 in.) (H)
× 0.264 mm (.010 in.) (V)
Power consumption figures are
for the monitor and the power
supply combined.
Power Input
Supply Voltage:
Max Supply Current:
100 - 240 V ac, 60/50 ± 3 Hz
1.5 A at 120 V ac
Power
Consumption
Normal Operation:
DPMS Stand-by:
DPMS Suspend:
DPMS off:
< 40 W
< 2 W for Analog, < 3 W for Digital
< 2 W for Analog, < 3 W for Digital
< 2 W for Analog, < 3 W for Digital
Video
Input(Analog)
Input Signal:
Analog Direct Drive, 75 ohm 0.7 V
1280 pixels (max)
1024 lines (max)
Horiz. Addressability:
Vert. Addressability:
Clock Frequency:
135 MHz
Video
Interface:
DVI
Input(Digital)
Input Signal:
VESA TMDS (Panel Link TM)
1280 pixels (max)
1024 lines (max)
135 MHz
Horiz. Addressability:
Vert. Addressability:
Clock Frequency:
Communications
VESA DDC:
2 B
Supported Display
Modes
VESA Standard modes between
Horiz. Frequency:
Vert. Frequency:
IBM, VESA, HP, Sun, Mac
31 kHz - 81 kHz (Digital & Analog)
55 Hz - 76 Hz
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Environment
Temperature:
Operating:
Storage:
10 to 35° C (50 to 95° F)
- 20 to 60° C (-4 to 140° F)
- 20 to 60° C (-4 to 140° F)
Shipping:
Humidity:
Operating:
Storage:
10 to 80%
5 to 95%
5 to 95%
Shipping:
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Information
The following parts are for use by IBM service, or IBM authorized dealers, to support
the customer warranty. Parts are for service use only.
Model Type 6734
31P9584
31P9585
31P9587
31P9588
31P9590
31P9594
31P9595
6734-HB0
6734-HG0
6734-HB0
6734-HG0
6734-HB0, 6734-HG0
6734-HB0, 6734-HG0
6734-HB0, 6734-HG0
Monitor - Stealth Black
Monitor - Ash Grey
Stand - Stealth Black
Stand - Ash Grey
Analog Video Cable
User's Guide CD
Setup Guide
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices and Trademarks
This section contains information on notices and trademarks.
Notices
IBM may not offer the products, services, or features discussed in this document in all
countries. Consult your local IBM representative for information on the products and services
currently available in your area. Any reference to an IBM product, program, or service is not
intended to state or imply that only that IBM product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any IBM intellectual
property right may be used instead. However, it is the user’s responsibility to evaluate and
verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You
can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
The following paragraph does not apply to the United Kingdom or any country where
such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES
CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new editions
of the publication. IBM may make improvements and/or changes in the product(s) and/or the
program(s) described in this publication at any time without notice.
IBM may use or distribute any of the information you supply in any way it believes appropriate
without incurring any obligation to you.
Any references in this publication to non-IBM Web sites are provided for convenience only and
do not in any manner serve as an endorsement of those Web sites. The materials at those
Web sites are not part of the materials for this IBM product, and use of those Web sites is at
your own risk.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
The following terms, used in this publication, are trademarks or service marks
of the IBM Corporation in the United States, other countries, or both:
HelpCenter IBM
ENERGY STAR® is a U.S. Govt. registered trademark.
Microsoft® Windows®, and Windows NT are trademarks of Microsoft
Corporation in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service
marks of others.
© Copyright International Business Machines Corporation 2003. All
rights reserved.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|