Color Monitor
C190
User’s Guide
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety: Read first
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: Before connecting the monitor, turn off the computer and attached devices. Also
ensure the power at the electrical outlet matches the power requirements of the monitor.
Refer to the Specifications section on page 18 for more details.
Attaching the stand
1. Place the monitor face down on a soft surface to prevent the screen being scratched.
2. Insert the hook (1) into the matching slots on the underside of the monitor (2).
3. Slide the base towards the front of the monitor until the latch (3) clicks into the locked
position.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your monitor
1. Connect the signal cable to the video port on the back of your computer (figure A).
Your computer may have a video adapter card installed. In this case, attach the
signal cable to the connector on the video adapter card (figure B)
2. Connect the power cord to the monitor first, and then firmly insert the plug into a
properly grounded electrical outlet.
3. Turn on the monitor, and then the computer.
If your monitor does not seem to be working correctly, refer to the Troubleshooting section for
help.
Workplace preparation
Positioning the monitor
Choose a suitable place to position the monitor where it is not near fluorescent desk lighting
or any equipment that produces magnetic fields that could cause interference. Ensure that the
furniture or equipment can support the weight of the monitor. Allow at least 2 inches (50mm)
ventilation space around the monitor.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Height
Position the monitor so that the top of the screen is slightly below your eye level when you sit
at your workstation.
Orientation
Choose a position that gives the least reflection form lights and windows, usually at a right
angle to any windows. Position the monitor directly in front of you so that you do not have to
twist your body. Tilt the monitor to a comfortable viewing angle.
Working Practices
Rest
Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged
use of computer workstations can be tiring.
Back
Sit back in the chair and use the backrest.
Hands
Use a light touches on the keyboard, keeping your hands and fingers relaxed. Allow a space
in front of the keyboard to rest your wrists when not typing. Consider using a wrist pad.
Eyesight
Working with monitors, in common with any prolonged close work, can be visually demanding.
Look away from the screen, periodically and have your eyesight checked regularly.
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have to adjust this as
the lighting changes during the day. Many application programs let you select color
combinations, which can help you to view in comfort.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Device Driver
Installing the Device Driver for Windows 95 or Windows 98
To install the device driver in Microsoft® Windows®95 or Windows98, do the following:
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in
Windows 95 or Windows 98.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 95 or Windows 98 operating system.
Your computer’s Plug and Play code might warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double clicking on the Display icon.
5. Click the Settings tab.
If you are using Windows 95:
6. 1. Click the Change Display Type button.
2. Click the Change Monitor Type button.
• If you are using Windows 98:
6. 1. Click the Advanced button.
2. Click the Monitor tab.
3. Open the Upgrade Device Wizard window by clicking
on Change button and then select the Next button.
4. Click “Display a list of the known drivers for this device so that
I can choose a specific driver” and then select the Next button.
7. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.
8. Click OK.
9. Ensure that the CD drive letter is selected, and then select “DRIVERS” folder.
10. Select IBM C190 CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
11. Close all open windows and remove the CD.
12. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Device Driver for Windows 2000 or Windows Me
To install the device driver in Microsoft® Windows®2000 Professional or Microsoft Windows
Millennium Edition (Me), do the following:
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in
Windows 2000 or Windows Me.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
2000 or Windows Me operating system.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Upgrade Device Driver Wizard window by clicking on
Update Driver and then click the Next button.
11. Select “Display a list of the known drivers for this device so that I can
choose a specific driver” and then click the Next button.
12. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS”
folder.
15. Select IBM C190 CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the device driver in Windows XP
To install the device driver in Microsoft® Windows XP, do the following:
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in
XP.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
XP operating system.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver and then click
the Next button.
11. Select “Install from a list or Specific location (Advanced)” and then click the Next button.
12. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS”
folder.
15. Select IBM C190 CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
The image is already optimised for many display modes. However, the controls can be used
to adjust the image to your linking.
OSD Key Function
Icon
Control
Description
Power switch
OSD/OK
Switches the monitor on and off.
Activates the On-Screen-Display/ Select control icon /
Save Adjustment
Move right;
Brightness adjustment
selection
Moves the highlight to the icon to the right, or on
adjustment screens increases the effect of the
adjustment.
Move left;
Contrast adjustment
selection
Moves the highlight to the icon to the left, or on
adjustment screens decrease the effect of the
adjustment.
Exit
Exit OSD control.
Hotkey Functions
Brightness and contrast can be adjusted as follows, without the need to display the OSD:
Select the function and use the buttons to adjust. If adjustment is not made within 15 seconds, the
current settings will be saved and the control screen will disappear automatically.
Icon
Control
BRIGHTNESS
Description
Adjusts the background brightness
CONTRAST
Adjusts the contrast between foreground and background
9
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen-Display
Activating the On-Screen-Display
The monitor controls are accessed by pressing button to enable OSD (On-Screen-Display).
The main menu will be displayed as follows.
Each Sub-Menu icon is selected by highlighting it via the “ ” “ ” control and pressing
button “ ” to select. To exit the main or Sub-Menu then press the exit button “
”.
Main OSD menu controls
ICON
Control
Image Quality
Function instruction
Adjusts Brightness, Contrast, Moiré, and Degauss.
Image Position/Size
Image Shape
Color
Adjusts Horizontal / Vertical Position,
Horizontal/Vertical Size, Zoom and Rotation.
Adjusts Parallelogram, Trapezoid, Pincushion,
Pincushion balance, and Geometry reset.
Adjusts Preset color point, Custom, Reset User color.
Adjusts Information, Menu Languages, Accessibility,
Factory Default, Menu Position
Options
Exit
Closes the OSD menu.
OSD functions
Note: After a function is selected, use the “ ” “ ” buttons to increase or decrease the
adjustment. If the OK or Cancel button is not pushed within the menu time out period,
the current setup will be saved and the control screen will disappear automatically.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Quality
Image Quality
Sub menu
Icon
Control
Brightness
Function
Adjusts overall screen
brightness.
Sub menu function
Left
Right
Contrast
Moiré
Adjusts difference
between light and dark
areas.
Reduces elliptical
or wavy interference
patterns.
Left
Right
Horizontal
Vertical
/
/
Save
Degauss
Demagnetizes screen
Yes/No Option
to reduce image distortion.
Image Position/Size
Image
Position/Size
Sub menu
Icon
Control
Function
Sub menu function
Left
Horizontal
Position
Moves image left or right
Right
Left
Vertical Position Moves image up or down
Right
Left
Horizontal Size
Adjusts image width
Right
Left
Vertical Size
Adjusts image height
Right
Zoom
Adjusts image width and
height
Turns image clockwise or
counterclockwise.
/
/
Rotation
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Image shape
Image Shape
Sub menu
Icon
Control
Parallelogram
Function
Leans image to the left or
right.
Sub menu function
Left
Right
Left
Trapezoid
Pincushion
Adjusts top or bottom
image width.
Right
Expands or contracts
image sides.
/
Pincushion
balance
Moves image center left or
right.
/
Geometry reset
Resets image shape to
original settings
Yes/No Option
Color
Color
Sub menu
Icon
Control
Function
Sub menu function
Preset Color
Point
Select from standard white With three choices
color 9300K / 6500K / 5500K
Custom
Adjusts red green and blue Red / Green / Blue / Save
intensity
Reset User
Color
Resets custom
color to original value
Yes / No Option
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Options
Sub menu
Icon
Control
Function
Sub menu function
Information
Shows resolution, refresh
rate, product details.
Menu Language Changes language of
menu.
English, French, Italian, German,
Spanish.
Accessibility
Changes Menu timings
Button repeat
rate
Off /Default/Slow
Option
Menu time out 5/10/15/20/25/30
second options
Factory Default
Menu Position
Resets monitor to original
settings
Yes / No Option
Adjusts menu location.
Horizontal
/
Vertical
/
Save
Exit.
Closes the OSD menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Further information
Display modes
The display mode and monitor uses are controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape may change when the display mode changes. This is
normal and the image can be readjusted using the monitor controls.
To ensure flicker-free operation, select the highest (non-interlaced) refresh rate both the
computer and the monitor can support, (generally 75 Hz or higher), for the addressability that
your application requires.
For the display modes listed below, the screen image has been optimised during manufacture.
Resolution
720 x 400
Refresh Rate
70Hz
Horizontal Frequency
31.5kHz
640 x 480
60Hz
31.5kHz
640 x 480
85Hz
43.3kHz
800 x 600
75Hz
46.9kHz
800 x 600
85Hz
53.7kHz
1024 x 768
75Hz
60.0kHz
1024 x 768
85Hz
68.6kHz
1280 x 1024
1280 x 1024
1600 x 1200
Table1. Factory Preset Mode
75Hz
85Hz
75Hz
80.0kHz
91.1kHz
93.8kHz
Power Management
To benefit from power management, the monitor must be used in conjunction with a computer
that implements the Video Electronics Standards Association (VESA) Display Power
Management Signalling (DPMS) Standard.
The power management feature is invoked when the computer recognizes that you have not
used your mouse or keyboard for a user-definable period of time. There are several states as
described in the table below.
State
Power
indicator
Green
Screen
Restoring Operation
Compliance
On
Off
Normal
Blank
Press a key or move the mouse.
ENERGY STAR®
Amber
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have a problem setting up or using your monitor, you may be able to solve it yourself.
Before calling your retailer or IBM you should try the suggested actions that are appropriate to
your problem.
Problem
Screen is blank and
power indicator is off.
Possible Cause
No power to monitor.
Suggested Action
Reference
Connecting you
•
Ensure the electrical
outlet and the monitor monitor starting
are both switched on.
Check power cord is
firmly plugged into the
monitor and the
electrical outlet.
If the power cord plug
has a removable fuse,
replace it.
on page4.
•
•
•
•
•
Try another power
cord.
Try another electrical
outlet.
Adjust brightness and
contrast.
Screen is blank and
power indicator is
steady green.
Brightness and
Contrast may be too
low.
User controls
section starting
on page 9.
SIGNAL OUT OF
RANGE message is
displayed.
Display mode of the
computer is outside
the range of the
monitor.
Video cable
connection.
•
•
Reconfigure the
computer to use a
supported display
mode.
Check the signal
cable is firmly
Further
information
section starting
on page 14.
CHECK SIGNAL
CABLE message is
displayed.
connected to the
computer.
•
•
Check no pins are
bent in the signal
cable connector.
Press any key on the
keyboard or move the
mouse to restore
operation.
Screen is blank and
power indicator is
amber.
The monitor is in
Power Management
Standby/Suspend or
Off state.
No video signal from
the computer.
•
•
Check the computer is
powered on.
Check the signal
cable is firmly
connected to the
computer.
•
•
Check no pins are
bent in the signal
cable connector.
Reconfigure the
computer to use a
non-interlaced display section starting
mode with a refresh
rate of at least 75 Hz.
Image appears to be
flickering.
The monitor is
operating in an
interlaced or low
refresh rate display
mode.
Further
information
on page 14.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Cause
The monitor may be
affected by
interference from
nearby equipment.
Suggested Action
Reference
•
•
•
Move fluorescent
desk lighting or any
equipment that
produces magnetic
fields further away
from the monitor.
If another monitor is
close by, separate the
two monitors by at
least 300mm (12 in.)
for optimal
performance.
Move any equipment
that produces
Image appears to be
discolored.
The monitor may be
affected by
interference form
nearby equipment.
magnetic fields (For
example, sub woofer
loud speakers) further
away form the
monitor.
•
If another monitor is
close by, separate the
two monitors by at
least 300mm (12 in.)
for optimal
performance.
Magnetization of
monitor components
has built up.
Degauss the monitor using
OSD manual demagnetize
function. This function can
only be used once in a 30
minute period.
Further help
If you are unable to correct the problem yourself, you may seek further help as follows:
Call IBM HELPCENTER.
In the US call 1-800-772-2227
In Canada (Toronto only) call 416-383-3344
(All other areas) call 1-800-565-3344
In other countries, contact your dealer, retailer, or other IBM authorized servicer.
Before calling please have available as much of the following information as possible:
1. Type, model and serial number form the label on the back of your monitor.
2. Purchase receipt.
3. Description of problem.
4. Computer type and model.
5. System configuration (additional hardware etc.).
6. System BIOS version number.
7. Operating System and version number.
8. Display driver version number.
9. Video Adapter Type
16
Download from Www.Somanuals.com. All Manuals Search And Download.
If possible, stay by your computer system. Your technical support representative might want
to go through the problem with you during the call.
More help, late- breaking news and details of the latest accessories for these products may
be found on the Worldwide Web at:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The C190 (MT6739) color monitor uses a 19-inch FFSM CRT with a viewable image size of
457.3mm (18.0 in.).
Dimensions
Width:
Depth:
Height:
Packing:
Unpacking:
Forward tilt:
Backward tilt:
Swivel:
456 mm (17.95 in.)
458 mm (18.03 in.)
468 mm (18.42 in.)
24.6 kg (54.23 lb)
21.25 kg (46.85 lb)
4.5°
Weight
Tilt Swivel
15°
+90°/-90°
Image
Maximum Height:
Maximum Width:
Dot Pitch:
Supply Voltage:
Max Supply Current:
Input Signal:
274.5 mm (10.80 in.)
365.8 mm (14.40 in.)
0.25 mm (0.0098 in.)
100-240 V ac, 50-60Hz
1.6A at 100 V ac
Analog Direct Drive,
75 ohm 0-0.7 V
1600 pels (maximum)
1200 lines (maximum)
202.5 Mhz
Power Input
Video Input
Horiz. Addressability:
Vert. Addressability:
Clock Rate
Communications
VESA DDC
2B
Synchronization Range
Horiz. Frequency:
Vert. Frequency:
Normal Operation:
Off:
30 kHz-96 kHz
50 Hz-160 Hz
<100 W
Power Consumption
(Typical)
<2 W
Environment
Operating Temperature:
Storage Temperature:
Shipping Temperature:
5 to 40 °C (41 to 104 °F)
-20 to 65 °C (-4 to 149 °F)
-20 to 65 °C (-4 to 149 °F)
Operating Humidity:
Storage Humidity:
Shipping Humidity:
Emissions:
10 to 90 %
10 to 95 %
10 to 95 %
TCO03/TCO99
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Information
The following parts are for use by IBM Service, or IBM authorized dealers, to support the
customer warranty. Parts are for service use only.
Part Number
31P9687
31P9688
31P9721
31P9689
31P9690
31P9691
31P9692
31P9696
Machine type-6739
6739 K0N
6739 60N
Description
Two Tone Black
Stealth Black
Stealth Black
Two Tone Black
Stealth Black
Two Tone Black
Stealth Black
Stealth Black
6739 70N
6739 K0E
6739 60E
6739 K0S
6739 60S
Tilt/Swivel
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices and Trademarks
This section contains information on notices and trademarks.
Notices
IBM may not offer the products, services, or features discussed in this document in all
countries. Consult your local IBM representative for information on the products and services
currently available in your area. Any reference to an IBM product, program, or service is not
intended to state or imply that only that IBM product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any IBM intellectual
property right may be used instead. However, it is the user’s responsibility to evaluate and
verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter described in
this document. The furnishing of this document does not give you any license to these
patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
The following paragraph does not apply to the United Kingdom or any country where
such provisions are inconsistent with local law: INTERNATIONAL BUSINESS
MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIEDWARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply
to you.
This information could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new
editions of the publication. IBM may make improvements and/or changes in the product(s)
and/or the program(s) described in this publication at any time without notice.
IBM may use or distribute any of the information you supply in any way it believes appropriate
without incurring any obligation to you.
Any references in this publication to non-IBM Web sites are provided for convenience only
and do not in any manner serve as an endorsement of those Web sites. The materials at
those Web sites are not part of the materials for this IBM product, and use of those Web sites
is at your own risk.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
The following terms, used in this publication, are trademarks or service marks of the IBM
Corporation in the United States, other countries, or both:
IBM logo, HelpCenter and IBM.
ENERGY STAR is a U.S. Govt. registered trademark.
Microsoft Windows, and Windows NT are trademarks of Microsoft
Corporation in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service
marks of others.
© Copyright International Business Machines Corporation 2003. All
rights reserved.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|