REQUIRED TOOLS
AND MATERIALS:
A DIVISION OF RUSSELL CORPORATION
• 2 People
Pro Slam Rim
• Tape Measure
• Safety Glasses
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
• Stepladder
8 ft. (2.4m)
• (2 each) Wrenches
1/2"
AND/OR
• Socket Wrenches and Sockets
(Deep-Well Sockets are
Recommended).
1/2"
OPTIONAL TOOLS
AND MATERIALS:
• Large & Small Adjustable
Wrenches
Write Model Number
WARNING!
From Box Here:
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO
PROPERTY.
Toll-Free Customer Service Number for U.S: 1-800-558-5234,
For Canada: 1-800-284-8339,
For Europe: 00 800 555 85234 (Sweden: 009 555 85234),
For Australia: 1-800-632-7921
Internet Address: http://www.huffysports.com
1
08/05
ID# M788001
© COPYRIGHT 2000 by HUFFY SPORTS
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE TO ASSEMBLERS
ALL Huffy Sports Basketball Systems, including those used for DISPLAYS, MUST be assembled
and ballasted with sand or water according to the instructions. Failure to follow instructions
could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system.
IMPORTANT!
Remove all contents from boxes.
Be sure to check inside pole sections;
hardware and additional parts are packed inside.
WARRANTY CARD:
Please remember to complete your product
registration form either on-line at:
www.huffysports.com or mail-in the
enclosed postcard.
For more information on assembly, placement, proper
use, and maintenance, visit The American Basketball
3
08/05
ID# M788001
Download from Www.Somanuals.com. All Manuals Search And Download.
Get to know the basic parts of your basketball system.....
SUPPORT
STRUT
RIM
SLAM JAM
BRACKET
SPRING
NET
PARTS LIST - See Hardware Identifier
Item Qty. Part No.
Description
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
579800
900033
203796
200318
203472
203470
203795
Warning Label
Slam Jam Bracket, Black
Bolt, “Tee” 3/8 - NC x 5 Long
Bracket Reinforcement, Slam Jam
Spring, Black
Washer, Flat 5/8 I.D. x 1-1/2 O.D.
Nut, Special 3/8-NC
4
4
4
4
201611
203113
203104
205528
Hex Flange Bolt 5/16-18 x 3 Long
Hex Flange Bolt 5/16-18 x 2-1/2" Long
Hex Flange Bolt 5/16-18 x 2" Long
Hex Flange Bolt 5/16-18 x 1" Long
9
1
4*
4
Net
10
11
12
13
14
15
203309
203100
Washer, 1 O.D.
Hex Flange Nut, 5/16 x 18
Rim
1
1
202795
200520
Logo, NBA
2
Self Tapping Screw, #8 x 1/2
1
200503
200504
Cover, Black
Cover, Red
* QUANTITY USED MAY VARY BY MOUNTING METHOD.
4
ID# M788001 08/05
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFIER
#2 (1)
#4 (1)
#5 (1)
#6 (1)
#3 (1)
RIM TO BOARD BOLTS
(This kit will only include 4 of one of
the bolts listed below):
#11 (4)
#7 (1)
Item #8 (4) 201611
#8 (4) 203113
These items may not be included
with your set-up.
#8 (4) 203104
#14 (2)
#8 (4) 205528
For Steel Framed
Acrylics
#13 (1)
#10 (4)
5
08/05
ID# M788001
Download from Www.Somanuals.com. All Manuals Search And Download.
Place Slam Jam bracket (2)
onto rim bracket.
HARDWARE USED IN THIS
SECTION
NOTE:
Lip of Slam Jam
bracket will hook
over rim bracket.
1.
(not actual size)
2
#2
12
Insert tee-bolt (3) into Slam-Jam bracket (2).
Secure tee-bolt with reinforcement bracket (4).
HARDWARE USED IN THIS
SECTION
2.
3
2
12
4
NOTE
ORIENTATION:
#4 (1)
#3 (not actual size)
6
ID# M788001 08/05
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE USED IN THIS
SECTION
NOTE:
Tighten nut (7) until flush
with end of tee-bolt (3)
as shown.
2.
Attach special nut (7),
washer (6) and spring
(5) to tee-bolt (3).
#7
6
7
4
3
#6
5
#5 (not actual size)
7
08/05
ID# M788001
Download from Www.Somanuals.com. All Manuals Search And Download.
#8 (4) 201611*
#11
HARDWARE
USED IN
THIS STEP
#8 (4) 203113*
#8 (4) 205528*
For Steel Framed
Acrylics
* See hardware identifier
#10
#8 (4) 203104*
Connect rim using bolts (8), washers (10) and nuts (11).
NOTE:
3.
BOARD STYLE
WILL VARY.
NOTE:
DEPENDING ON WHAT TYPE
OF BOARD THE RIM IS BEING
ATTACHED TO (SEE
NOTE:
BOLTS (8) WILL VARY
BOLTS (8) NEED TO PASS
THROUGH RIM HOLES AND
SUPPORT ONLY THE SLAM
JAM BRACKET (2).
HARDWARE IDENTIFIER).
8
8
2
10 ft.
(3.05M)
10
11
REGULATION RIM HEIGHT
IS 10 FEET (3.05M).
8
ID# M788001 08/05
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
1.
3.
Install net (9).
4.
5.
4.
14
12
Attach spring cover using self tapping screws (14).
15
12
Apply logo label (13) to
spring cover (15) as shown.
6.
15
13
9
08/05
ID# M788001
Download from Www.Somanuals.com. All Manuals Search And Download.
|