OVER 9 months - 36 months
05545
Step Start Walk ‘n Ride™
Adult supervision required. This ride-on toy is not to be used near swimming
pools, on or near hills, roadways or stairways. Shoes must be worn at all
times when riding this toy. Designed for only one rider at a time.
WARNING:
This product contains small parts which are necessary for assembly. Prior to
and during assembly of this product, keep small parts out of children's reach.
Small parts pose a choking hazard to children under 3 years.
CAUTION:
ADULT ASSEMBLY AND PHILLIPS/CROSS HEAD SCREWDRIVER (NOT INCLUDED)
REQUIRED.
MAXIMUM WEIGHT 42 LBS. (19 KGS.)
Parts include: body/chassis, 4 wheels, front handle, rear handle, handle retainer, dial,
roller, spinner (2 pieces), antenna, gear shift, 4 plain #6 screws, 1 #6 screw with
attached washer, and instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREW
ROLLER
DIAL
HOLE
RECESSED
AREA
4. Dial
5. Roller
With body/chassis on its side, insert dial into recess.
Turn body so that underside of chassis faces you.
Insert #6 screw with attached washer into hole, and
tighten with Phillips/cross head screwdriver.
Turn body/chassis right side up and lower chassis onto
body. Insert posts on roller into holes in recessed area
(smaller post into smaller hole, larger post into larger
hole).
GEAR SHIFT
ANTENNA
RECESSED
AREA
HOLE
6. Antenna
Antenna fits only one way. Insert end of antenna into
hole.
7. Gear Shift
Gear shift fits only one way. Inserts posts on gear shift
into holes in recessed area (smaller post into smaller
hole, larger post into larger hole).
SPINNER
SPINNER
PIECE
8. Spinner
Slide slots on each spinner piece into each other until
they snap into place. Snap assembled spinner into
recessed area.
RECESSED
AREA
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION:
NOTE: Upon completing assembly, the toy will probably be in the ride-on mode.
LATCH
LATCH
LATCH
• To Convert From Ride-On To Walker:
• To Convert From Walker To Ride-On:
Lift toy to access underside of chassis. Squeeze latch
Squeeze latch on top of chassis. Lift rear handle up and
with one hand, and at same time, grasp rear handle and
forward. Rotate handles up then lower body onto
lift up body.
chassis.
Push handle down to lock into place - latch must be
Make sure the handle locks into place.
visible to lock in place (listen for click).
Make sure the handle locks into place.
Product and colors may vary.
© 2003 Hasbro, Inc. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
PLAYSKOOL.COM
FOR NEW PRODUCTS AND OFFERS
Questions? Call: 1-800-PLAYSKL
U.S. Patent Nos. 6,296,268 & D424,126
05545
P/N 6257540200
Download from Www.Somanuals.com. All Manuals Search And Download.
|