TOOL CHEST
AND ROLLER CABINET
94582
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvement, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts please call 1-800-444-3353.
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Do not use or assemble the Tool Chest and Roller Cabinet if under the influence of
alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not assemble or use the
Chest and Cabinet.
11. Improper use can cause the Tool Chest and Roller Cabinet to tip over, causing personal
injury or death. Load the chest evenly from the bottom up.
12. Do not exceed the Tool Chest and Roller Cabinet’s maximum weight capacity of 114 Lbs.
The weight capacity for each Tray and Drawer is 11 Lbs.; Shelf capacity is 22 Lbs.
13. Always load the Tool Chest and Roller Cabinet evenly. If the Tool Chest is top-heavy, it may
tip over when moved.
14. Use the Tool Chest and Roller Cabinet on a flat and level surface. This will lessen the
chance of it rolling away and possibly causing injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Roller Cabinet
Screw
(2B)
Caster (1B)
Handle (9)
Figure 2
Figure 1
Assembly/Operation
Your Tool Chest and Roller Cabinet will require complete assembly. It is important that you read the
entire manual to become familiar with the product BEFORE you assemble and use the Tool Chest
and Roller Cabinet. Before assembling the Chest and Cabinet be sure that you have all parts
described in the Parts List located on page 4 of this manual.
1.
2.
Insert each of the Caster (1B) shafts into the holes in the bottom of the Tool Chest and Roller
Cabinet-see Figure 1.
Attach the Handle (9) to the side of the Roller Cabinet with two Screws (2B) and
Nuts (3B)-see Figure 2.
3.
4.
5.
6.
Set each Shelf (8) down onto the lips built into the sides of the Roller Cabinet.
Set each of the Hooks (6B) in place on the Door.
Place the Tool Chest onto the top of the Roller Cabinet to have it stand as one unit.
If the Non-Slip Mats (4, 5) are not in place in the face drawers, place the Non-Slip Mats (4, 5)
into each of the Drawers.
7.
Make certain that the Tool Chest drawers lock when the top tray is closed.
SKU 94582
For technical questions please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List for Tool Chest (A)
Description
Part #
1A
2A
3A
4A
5A
Drawer with plastic liner
Plastic Liner
B Type
Sponge
Sponge
Parts for Cabinet (B)
Part #
1B
Description
Caster
Part #
6B
Description
Hook
2B
3B
Screw M6 X 12
Nut
7B
8B
Spring
Shelf
4B
5B
Pin for Door
Door
9B
10B
Handle
Hook Lock
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT
OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 94582
For technical questions please call 1-800-444-3353.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|