Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
**
Read this manual carefully and make sure you understand the instructions provided. For your
safety, be aware of the following precautions.
Warnings, Cautions and Notes
Throughout the whole manual, pay special attention to the following marks that indicate
hazardous situations.
**
•
•
Warning
Indicates a hazardous situation which, if not avoided, could result in (serious) injury.
Caution
Indicates a situation which, if not avoided, could damage the equipment or other
apparatus.
•
Note
Indicates additional information to make the user aware of possible problems and
information of any importance to help understand, use and maintain the installation.
**
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
This symbol indicates dangerous voltage inside the product that presents a
risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the product.
GB 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warning
**
This product has been manufactured to comply with international safety standards. Please read
the following safety precautions carefully.
**
Safety Instructions and Precautions
1. MAINS SUPPLY
*9* 0 - 250V AC 50/60Hz
Operate your product only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your local power
company. Disconnect the product from the mains before you start any maintenance or
installation procedures
**
2. OVERLOADING
**
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire
or shock.
**
3. LIQUIDS
**
The product should not be exposed to any liquids such as dripping or splashing. In
addition, no objects filled with liquids, such as vase, should be placed on the apparatus.
**
4. CLEANING
**
Disconnect the product from the wall outlet before cleaning.
Use a light damp cloth (no solvents) to dust the product.
**
5. VENTILATION
**
The slots on top of the product must be left uncovered to allow proper airflow the unit. Do
not stand the product on soft furnishings or carpets. Do not stack electronic equipment
on top of the product.
**
6. ATTACHMENTS
**
Do not use any unsupported attachments as these may be hazardous or cause damage
the product.
**
7. CONNECTION TO THE CABLE TV SIGNAL AND TV
**
Connect all components before plugging any power cords into the wall outlet. Always
turn off the product, TV and other components before you connect or disconnect any
cables.
8. LOCATION
**
Place the product indoors to avoid exposing it to lightning, rain or sun.
Do not place it near a radiator or heat register.
Make sure it has more than 10 cm clearance from any appliances susceptible to
electromagnetic influences, such as a TV or a VCR.
Do not block the openings with any object and do not place the product on a bed, sofa,
rug, or other similar surface.
If you place the product on a rack or bookcase, ensure that there is adequate ventilation
and that you have followed the manufacturer's instructions for mounting.
Do not place the product on an unstable cart, stand, tripod, bracket or table from where it
can fall. A falling product can cause serious injury to a child or adult and serious damage
to the appliance
**
GB 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warning
**
9. LIGHTNING, STORM, or NOT IN USE
**
Unplug the product from the wall outlet and disconnect the cable during a thunderstorm
or when left unattended and unused for long periods of time. This will prevent damage to
the unit due to lightning and power-surges.
**
10. EXTRANEOUS OBJECTS
**
Do not insert anything through the openings in the unit, where they can touch dangerous
voltage points or damage parts
**
11. REPLACEMENT of PARTS
**
When replacement parts are required, be sure the service technician uses replacement
parts specified by the manufacturer, or those that have the same characteristics as the
original part.
Unauthorized substitution may result in additional damage to the unit.
**
**
Warning
1. Follow these directions in order to avoid damage of the power cord or plug.
Do not modify or process the power cord or plug arbitrarily.
Do not bend or twist the power cord.
Make sure to disconnect the power cord holding the plug.
Keep heating appliances as far as possible from the power cord in order to prevent the
cover vinyl from melting.
The mains plug shall remain readily operable.
2. Follow these directions. Failure to follow any of them may cause electrical shock.
Do not open the main body.
Do not insert metals or inflammable objects inside the product.
Do not touch the power plug with wet hands.
Disconnect the power cord in case of lightning.
3. Do not use the product when it is out of order. If you continue to use the product when
defective, a serious damage can be caused toit. Make sure to contact your local product
distributor if the product is out of order.
4. Please do not insert metal or alien substance into the slots for the modules and
Smartcards. It may cause damage to the product and reduce its life span.
GB 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
**
1. Before Using the Product
GB7
**
1.1 Package Contents
1.2 Front Panel
GB7
GB8
1.3 Conditional Access
1.4 Rear Panel
GB9
GB10
GB11
GB13
1.5 Remote Control
2. Setup
**
2.1 Connecting the Cable
2.2 Powering On
GB13
GB16
GB17
3. Installation Wizard
**
3.1 Language
GB17
GB17
GB18
GB19
3.2 Channel Search
3.3 Result
4. Basic Operation
**
4.1 Switching Channel
GB19
GB19
GB19
GB20
GB20
GB22
GB24
GB26
4.2 Volume Control
4.3 Subtitle
4.4 Audio
4.5 Teletext
4.6 Programme Information (i-plate)
4.7 Option List
5. Channel List
**
5.1 Displaying and Switching Channel List
5.2 Edit Channels
GB26
GB27
GB29
GB32
GB33
5.3 Edit Favourite Channels
5.4 Channel Change Mode
6. Programme Guide
**
6.1 Viewing Programme Guide Information
6.2 Finding a Programme
GB33
GB35
GB36
6.3 Viewing Reserved Programme
GB 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
**
7. Setting Preferences
7.1 Parental Control
GB38
**
GB38
GB40
GB42
GB43
GB44
GB45
GB47
7.2 Language Setting
7.3 Time Setting
7.4 Schedule
7.5 A/V Control
7.6 Miscellaneous Settings
8. Installation
**
8.1 Channel Search
8.2 Software Update
8.3 Default Setting
GB47
GB49
GB49
GB50
9. Software Update
9.1 OTA (Over the Air)
10. System Information
**
**
GB50
GB52
10.1 Status
GB52
GB53
GB53
GB53
GB54
GB55
GB56
10.2 Signal Detection
10.3 Conditional Access
10.4 Mail Messages
11. Games
12. Menu Map
13. Troubleshooting
**
13.1 Troubleshooting
13.2 Error Message
14. Specification
GB56
GB58
GB59
GB61
GB62
15. Glossary
16. Service and Support
GB 6
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before Using the Product
**
This chapter provides detailed instructions on the product and its accessories.
1.1 Package Contents
Please check all package contents before using the product.
**
**
Remote Control
Batteries
**
SCART Cable
User's Manual
**
Note:
•
Faults may occur if the remote control is being left without a battery for a long time.
Always keep the battery inserted in the remote control.
•
Package contents may vary according to area.
GB 7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before Using the Product
**
1.2 Front Panel
**
**
1. STANDBY LED
**
Red light is emitted when the product is in standby mode.
**
2. TV LED
**
Green light is emitted when the product is in TV mode.
**
3. RADIO LED
**
Amber light is emitted when the product is in radio mode.
**
4. STANDBY Button
**
Switches between operation and standby modes.
**
5. TV/RADIO Button
**
Switches between TV and radio.
**
6. CH-/CH+ Button
**
Moves the TV/radio channel up/down.
**
7. SMARTCARD SLOT
**
Slot for a Smartcard.
**
GB 8
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1.3 Conditional Access
Although some TV and radio channels are free to air, most TV and radio/music channels are
available on a subscription basis and can only be enjoyed via a Conditional Access component.
The Conditional Access component is a removable Smartcard.
1. Inserting the Smartcard
The Smartcard looks similar to a credit card and is inserted into the slot behind the right-hand
front flap of the product. A valid Smartcard entitles you to view and listen to all the channels you
choose to subscribe to.
1. Open the right-hand flap on the front panel of the product. Swing it down wards to
expose the card slot.
2. Hold the Smartcard horizontally with the electronic chip (small square-shaped, gold in
colour) facing downwards.
3. Insert the Smartcard into the top slot until the card is completely in.
**
GB 9
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before Using the Product
**
1.4 Rear Panel
**
**
1. CABLE IN
**
Connects a cable to the CABLE input jack of the product.
**
2. TV/VCR
**
Connects the RF input jack of the TV/VCR to the product.
**
3. TV SCART
**
Connects to a TV SCART cable.
**
4. VCR SCART
**
Connects to a VCR SCART cable.
**
5. RS-232C
**
Connects to the PC to update the software programme of the product.
**
6. S/PDIF
**
Outputs the digital audio signals(S/PDIF).
**
GB 10
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1.5 Remote Control
1. SOURCE
3. NUMERIC(0~9) BUTTONS
*C* ontrols the input of TV.
*E* nters a TV/radio channel number or
**
menu option number.
**
2. TV/RADIO
*S* witches between TV and radio modes.
4. LIST
*D* isplays the channel list.
GB 11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before Using the Product
**
5. BACK
17. V-/V+
*R* eturns to the previous menu and
*A* djusts the audio volume.
**
screen.
**
18. MUTE
**
6. ARROW BUTTONS
Mutes or unmutes the audio temporarily.
*C* hanges the channel or moves the
**
19. i (INFORMATION/INDEX)
cursor up, down, left or right.
*D* isplays the information about the
channel and programme in normal
viewing mode. Moves to the index page
**
7. OPT+ (OPTION)
*D* isplays the channel attributes while
watching a programme.
in teletext mode.
**
**
8. AUDIO
20. WIDE
*D* isplays the audio list.
*C* hanges the display format.
**
**
9. CH-/CH+ or PAGE-/PAGE+
21. G (Game)
*C* hanges the channel or page.
*D* isplays games.
**
**
10. MENU
22. TELETEXT
**
*D* isplays the main menu.
a.
SUB-PAGE
**
Search the sub-page in teletext
mode. If it is not in the teletext
mode, display the current time.
11. STANDBY
*S* witches between operation and
b.
c.
d.
e.
f.
TELETEXT ON/OFF
Switches between teletext and
TV modes.
standby modes.
**
12. GUIDE
*D* isplays the programme guide.
DOUBLE
Displays the text size as double
size.
**
13. EXIT
*E* xits all On-Screen Display (OSD)
MIX
Adjusts transparency of teletext
screen.
screens.
**
14. OK
REVEAL
Displays the concealed
information.
*S* elects a menu, or confirms the selected
operation. And displays the channel list
while watching a programme.
HOLD
Holds the current page not
updating it.
15. FREEZE
*F* reezes the TV screen you are
g.
CANCEL
Hides the teletext leaving only the
page number.
watching. Play the audio continuously.
**
16. SUBTITLE
*D* isplays the subtitle language list.
**
GB 12
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Setup
**
This chapter describes how to connect the product to the TV with the particular equipments for
gaining optimum signal quality. The product provides various interfaces to connect to the TV,
VCR or other devices. Select the most appropriate procedure depending on the equipment you
have.
Note: If you encounter any problems setting up your product, please contact your local
product distributor.
2.1 Connecting the Cable
1. Connecting TV
This is the most simple setup mode.
**
**
•
•
Connect your CATV line to the CABLE IN socket on the product for receiving cable
services.
The TV SCART is connected as in the figure above.
GB 13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Setup
**
2. Connecting TV/VCR with 2 SCARTs
This is the optimal way to connect the product.
**
GB 14
Download from Www.Somanuals.com. All Manuals Search And Download.
**
3. Connecting Hi-Fi system
If you wish to connect S/PDIF to the optical S/PDIF terminal and Dolby Digital decoder to listen
to digital audio, connect as the following.
**
GB 15
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Setup
**
2.2 Powering On
1. Connect the power cord of the product to a wall outlet.
**
**
2. Power on by pressing the STANDBY
button on the remote control or the STANDBY
button on the front of the product.
**
GB 16
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Installation Wizard
**
When powering on the product for the first time after purchasing, the installation wizard will
operate automatically.
You can easily set-up using simple organisation and options, and watch the broadcasting after
completing the set-up procedure. You can select items using the NUMERIC(0~9) buttons.
**
Note:
•
If you press the BACK
running the installation wizard, you can return to the previous screen.
button or select Back and press the OK
button while
•
The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
3.1 Language
Select the appropriate language from the list using the
button and press the OK
button to save the
selected language as a default language for menu,
subtitle and audio.
3.2 Channel Search
You can search channels automatically or manually. If you select manual search, you have to
set parameters for search.
•
Frequency: Enter the frequency using the
NUMERIC(0-9) buttons and press the OK
button.
•
Symbol Rate: Select the symbol rate using the
button and press the OK
or button.
If the required value is not listed, then select
User Define and enter the value using the
NUMERIC(0~9) buttons.
•
Network ID : Enter the network ID using the
NUMERIC(0-9) buttons and press the OK
button.
**
Select Next and press the OK
button to start channel search.
GB 17
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Installation Wizard
**
Please wait for finishing the channel search. If you
want to stop the operation during search, press the OK
button.
**
Select Save and press the OK
button to save the
result and go to the next step.
3.3 Result
It displays the default language, country, time offset
and channel search result.
Select Finish using the
button and press the OK
button to complete the installation wizard.
GB 18
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Basic Operation
**
This chapter describes functions such as switching channel, volume control and basic features
for watching programmes.
4.1 Switching Channel
You can switch the current channel using one of the following methods.
1. Press the CH-/CH+
or
button.
2. Enter the channel number using the NUMERIC(0~9) buttons to move to the channel
directly.
3. Press the TV/RADIO
button to switch between TV channel and radio channel.
**
Note: You can switch channel using the channel list or programme guide. For more
information, please refer to Chapter 5. Channel List and 6 Programme Guide.
4.2 Volume Control
1. Press the V-/V+
2. Press the MUTE
or
button to adjust the audio volume.
button to stop the audio temporarily.
**
Note: The mute function remains set while you switch channels.
4.3 Subtitle
If the current programme provides subtitle information, you can select the language for the
subtitle.
1. Press the SUBTITLE
button to display the
subtitle language list.
2. Select a subtitle language using the
button and press the OK
button. Then the
subtitle will be displayed in the selected
language at the bottom of the screen.
3. Select Off from the subtitle language list to hide
subtitle from the screen.
**
Note: You can select a default subtitle language in MENU - Preferences - Language Setting
- Subtitle Language.
GB 19
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Basic Operation
**
4.4 Audio
If the current programme is available in multiple audio languages, you can select the language
you prefer.
1. Press the AUDIO
2. Select an audio language you prefer using the
button and press the OK button.
3. Select audio direction (left, right, stereo) using
the button.
button.
**
Note:
•
You can select the default audio language in MENU - Preferences - Language Setting
- Audio Language.
•
•
If the programme in use is Dolby Digital, you cannot set the audio direction.
If you select Dolby Digital in MENU - Preferences - Language Setting - Audio
Priority, the programme is automatically broadcasted in Dolby Digital audio regardless
of default audio language.
4.5 Teletext
When the channel supports teletext, the teletext icon ( ) is displayed on the i-plate. To enter
Teletext mode, press the TELETEXT ON/OFF
button or the SUBTITLE
button to
display teletext.
1. Using Teletext Menu
1. Press the MENU
button to display teletext
menu in teletext mode.
2. Select the required teletext function using the
button.
3. Press the OK
button.
GB 20
Download from Www.Somanuals.com. All Manuals Search And Download.
**
Teletext Functions
Index
Returns to index page. If there is no index page, jump to page 100.
Sub-page
Searches the sub-page using the sub-code written by users. If it is
not in the teletext mode, display the current time.
MIX
Adjusts the transparency of teletext screen.
Hides the teletext except page number.
Displays the concealed information.
Cancel
Reveal
Double Size Displays the text size as double size.
Page Hold Holds the current page not updating it.
2. Viewing Teletext Page
1. Enter the page number using the
NUMERIC(0~9) buttons to move to the page
directly.
2. Press the
button to move to the next page.
button to move to the previous
3. Press the
page.
4. Press the CH-/CH+
button to move to
previous/next page.
5. Press the BACK
button to move back to
the recently viewed pages.
GB 21
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Basic Operation
**
4.6 Programme Information (i-plate)
Programme information is displayed for a certain period of time whenever you switch channels.
You can view the programme information by pressing the i
button while watching a
programme. Press the EXIT
button to hide the i-plate.
1. General Information
General information is displayed as follows on the screen.
**
1. Channel number and channel name
2. Programme name
3. Icons
Displayed only if this programme is reserved.
Represents parental control level. Indicates the minimum level of ages for
viewing the programme.
Displayed only when the channel is a locked channel.
Displayed only when the channel is a scrambled channel.
Displayed only when subtitle information is available.
Displayed only when there is any teletext information.
Displayed only when Dolby Digital is in use.
Represents the screen ratio of the programme.
**
4. Current time
5. Detail programme information: Displayed if detailed programme information is provided.
GB 22
Download from Www.Somanuals.com. All Manuals Search And Download.
**
6. Channel looping mode and channel list name : If you select Within the current channel
list in MENU - Edit Channels - Channel Change Mode, the icon of channel looping
mode is displayed. And the channel list, which you selected, is displayed.
7. Programme broadcasting time and progress bar: Displays programme playing time and
progress bar.
8. Next programme Information : Displayed if next programme information is provided.
Press the button to display the next programme information.
**
Note: If there is no programme information available, programme information is not displayed.
2. Detailed Programme Information
You can see the detailed information about the current
programme. Press the i
button when the i-plate is
displayed to view detailed information.
Note:
•
Press the i
information box.
button again to hide the
•
If the detailed programme information is more
than one page, use the
the previous/next page.
button to move to
GB 23
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Basic Operation
**
4.7 Option List
You can view and confirm detailed information about the current channel and change the
information if necessary.
**
Note: Press the OPT+
button when the channel list is displayed to view the option list.
Then the following functions in the option list are performed to the current channel
where the cursor is located.
1. Adding a Channel to Favourite Group
You can add the current channels to Favourite group immediately. Also, you can add a channel
to multiple Favourite groups.
1. Press the OPT+
button.
2. Select Favourite using the
button and
button
press the or OK
button.
3. Select Favourite group using the
and press the OK
button to register for
Favourite group.
4. Press the OK
button again on the selected
Favourite group to release the registered
channel.
**
5. Move to the parent menu using the button to
save the changes automatically.
**
Note: For detailed information about how to change
Favourite group's name and how to register all
channels in Favourite channel, refer to
Chapter 5. Channel List.
GB 24
Download from Www.Somanuals.com. All Manuals Search And Download.
**
2. Locking/Unlocking a Channel
You can lock or unlock the current channel while watching a programme.
1. Press the OPT+
2. Select Lock using the
the OK or button.
3. Select Lock option using the
press the OK button.
4. Select Unlock option using the
and press the OK button.
button.
button and press
button and
button
5. You will be prompted to enter your password.
Enter your password to unlock the channel.
**
6. Move to the parent menu using the button to
save the changes automatically.
**
Note:
•
When switching to the locked channel, you
must enter the password to watch a
programme.
•
The default password is 0000. If you have
forgotten your password, please contact your
local product distributor.
GB 25
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Channel List
**
Three types of channel lists are provided for easy and quick channel finding.
TV
The list of all TV channels with two sub-groups: one is sorted by channel
number, the other is sorted by channel name.
Radio
Favourite
The list of all radio channels with two sub-groups: one is sorted by channel
number, the other is sorted by channel name.
The list of Favourite channels with five sub-groups that you can organise
channels by your private taste.
5.1 Displaying and Switching Channel List
You can display channel list using the LIST
button and switch to another channel on the
channel list.
1. Press the LIST
button while watching a
programme to display the selected channel list.
2. Select a channel using the
button and
press the OK
button to change the
channel.
3. Enter the channel number directly using the
NUMERIC(0~9) buttons to move the cursor to
the channel you want. And then press the OK
button to change to the selected channel.
4. Press the
button to change a channel list
**
group while the channel list is displayed.
**
Note:
•
If there are multiple channels, press the
PAGE-/PAGE+
button to move by
button
page.
•
Each time you press the TV/RADIO
while the channel list is displayed, the channel
list will be switched between TV and radio
channel list.
•
To display scramble icon ( ) in the channel
list, select ON in MENU - Preferences -
Miscellaneous Settings - Option in CH List.
•
•
The sub-group of Favourite channel list may exist or not depending on your
configuration.
If Within the Current Channel List option is selected in MENU - Edit channels -
Channel Change Mode, you can only change programme within the selected channel
list using the CH-/CH+
button while watching a programme.
GB 26
Download from Www.Somanuals.com. All Manuals Search And Download.
**
5.2 Edit Channel Lists
You can edit all channels or each channel by channel list group.
1. Press the MENU
2. Select Edit Channels using the
and press the OK or button.
3. Select Edit Channel Lists using the
button and press the OK or button.
button.
button
4. You will be prompted to enter your password.
Enter your password using the NUMERIC(0~9)
buttons.
**
Note:
•
The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
•
•
Press the BACK
Press the MENU
or button to save the changes and return to the previous menu.
or EXIT button to exit the menu screen.
You can easily navigate all menus using the assigned number for each menu. Press the
MENU - 2 - 1 in order to select Edit Channel .
1. Selecting a Channel Group
You can select the channel list group to edit. TV and radio are included as the channel list
groups.
1. Press the OK
2. Select the group using the
press the OK button.
or button in group.
button and
**
**
Note:
•
•
Press the TV/RADIO
button to move to the TV or radio channel list directly.
For editing the Favourite channel list, move to MENU - Edit Channels - Edit Favourite
Channels .
GB 27
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Channel List
**
2. Locking/Unlocking Channels
You can lock or unlock one or more channels.
1. Move the cursor to the channel list using the
button.
2. Select a channel and then press the OK
button. You can select multiple channels.
3. Select Lock using the button and press the
OK
button.
**
Note:
•
When the locked channel(s) is selected or all
channels are locked, Lock is switched to
Unlock . When you select Unlock and press
**
the OK
button, locked channel is switched
to an unlocked channel.
•
Enter the password using the NUMERIC(0~9)
buttons to watch locked channels.
Note: The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
3. Selecting/Unselecting All Channels
You can select/unselect all channels at once.
1. Select Select All and press the OK
button to select all channels.
2. Select Unselect All and press the OK
button to unselect all the selected channels.
GB 28
Download from Www.Somanuals.com. All Manuals Search And Download.
**
5.3 Edit Favourite Channels
You can edit Favourite channel or Favourite channel list.
1. Press the MENU
2. Select Edit Channels using the
and press the OK or button.
button.
button
3. Select Edit Favourite Channels using the
button and press the OK
or button.
4. You will be prompted to select a Favourite
Group. Select a Favourite group you want to
edit using the
button.
button and press the OK
**
Note:
•
Press the BACK
Press the MENU
or button to save the changes and return to the previous menu.
or EXIT
button to exit the menu screen.
•
You can easily navigate all menu items using the assigned number for each menu.
Press the MENU - 2 - 2 in order to select Edit Favourite Channels .
**
The buttons for editing the Favourite channel list are described in the following table.
**
**
Add
Adds Favourite channel.
**
**
Remove
Removes from Favourite channel.
**
**
TV/Radio
Switches between TV and radio channel list.
**
**
Fav.Group
Changes Favourite channel list group.
**
**
Move
Moves the order of channel list within Favourite channel list.
**
**
Rename
Renames the name of Favourite channel list.
**
**
Sort
Sorts channels by number or name in all TV/radio channel list.
**
**
Unselect All
Unselect all the selected channel.
GB 29
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Channel List
**
1. Adding/Removing Favourite Channels
You can add Favourite channel(s) to a specific Favourite channel list or remove the added
Favourite channel(s) from the list.
1. Select Favourite group using
.
2. Select the channel(s) you want to add in all
TV/radio channel list and press
Favourite channel(s).
to add
3. Select the channel(s) you want to remove from
Favourite channel list and press
Favourite channel(s).
to remove
**
Note: You can switch between TV and radio channel
list using TV/RADIO button or
.
**
2. Moving Favourite Channels
You can move Favourite channel(s) to the location you want within the Favourite channel list.
This function changes the location only without changing the channel number.
1. Select Favourite group using
.
2. Select the channel to move within the Favourite
channel list and press the OK
button.
3. Select and press the OK
button.
4. Move the cursor to the wanted location using
the button and press the OK button.
5. The selected channel(s) is moved to the
location you selected.
GB 30
Download from Www.Somanuals.com. All Manuals Search And Download.
**
3. Renaming Favourite Channel List
You can rename Favourite channel list.
1. Select Favourite group to rename using
.
2. Select
and press the OK
button.
3. Enter Favourite channel list name using the
keyboard displayed on the screen.
4. When finishing entering Favourite channel list
name, select OK and press the OK button.
**
4. Additional Features
Additional features provides many useful functions necessary when editing Favourite channels.
**
Changing between TV and radio channel list
You can add not only TV channel(s) but also radio channel(s) to Favourite channel list. Press
to switch all channel list into TV or radio channels.
**
Note: You can also change to TV or radio channel by pressing TV/RADIO
button on the
remote control.
**
GB 31
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Channel List
**
Selecting Favourite channel list
You can select Favourite channel list to edit. Press
to display Favourite channel list. Then select the
channel list using the
button.
button and press the OK
**
Sorting a channel list
You can sort all TV or radio channel lists by channel number or name for easy Favourite
channel searching. If channel lists are sorted by channel number, is displayed. When you
press this button, all the channel lists are sorted by name. Or, if channel lists are sorted by
channel name,
is switched to
. Press this button to order channels by number.
**
Unselecting all the selected channels
Press
to unselect all the selected channels.
5.4 Channel Change Mode
You can change the channel either in the group or in the entire groups while watching a
programme.
1. Press the MENU
2. Select Edit Channels using the
and press the OK or button.
3. Select Channel Change Mode using the
button and press the OK or button.
4. Select All Channels or Within the Current
Channel List using the button and press
the OK button.
button.
button
**
Note: When Within the current channel list is selected, you can only change the channel
within the current channel list. To change the channel in another channel list in which
the current channel list is not located, change the channel list or select All channels
option.
GB 32
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Programme Guide
**
The programme guide displays programme information about each channel, based on the date
and time. You can also schedule your watching using the information given.
**
Note: Press the GUIDE
or EXIT
button to exit the guide screen.
6.1 Viewing Programme Guide Information
You can view programme information for all channels.
1. Press the GUIDE
2. Move to previous/next programme within the
same channel using the button.
button.
3. Move to another channel using the
button. If there are multiple channels, use
PAGE-/PAGE+
button to move to
channels by page. Also, you can enter channel
number you want using the NUMERIC(0~9)
buttons on the remote control to move to the
channel directly.
4. Select a programme and press the OK
button. You can watch the programme if it is
on air or reserve it if it is the future programme.
5. Press the i
button in the selected programme to view the detailed information for the
selected channel.
1. Viewing Guide Information by Channel List Groups
You can view programme information of the selected channel list by groups.
1. Press the GUIDE
button.
2. Press the RED button to display the channel list
group.
3. Select a channel list group using the
button.
4. Move the cursor to the sub-group using the
button, select a sub-group using the
button and then press the OK
button.
5. The programme guide for the selected channel
list is displayed.
GB 33
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Programme Guide
**
2. Viewing Programme Information Using Time Bar
You can quickly search the time zone you want using the time bar.
1. Press the GUIDE
2. Press the GREEN button to display the time bar.
3. Select the time bar using the button and press the OK
button.
button to move the time
bar. If you press the button repeatedly, the same operation is repeated.
4. Each button functions as follows.
Now Moves to the current programme where
the cursor is located.
Moves back to the previous programme
or 30 minutes before.
Moves forwards to the next programme
or 30 minutes ahead.
Moves back to 2 hours before.
Moves forwards to 2 hours ahead.
Day Moves back to one day before.
Day Moves forwards to one day ahead.
5. Select
button and press the OK
button to exit the time bar.
3. Reserving a Programme
You can make reservations for the future programmes you wish to watch automatically.
1. Select a programme and press the OK
button. The following message will be
displayed.
2. Select OK and press the OK
button to
reserve the programme. When a reservation
has been completed, the
icon is displayed
on the reserved programme.
3. Select the programme you wish to cancel
reservation and press the OK
Select OK and press the OK
button again.
button.
4. If the channel is locked, parental controlled or restricted by watching time, you will be
prompted to enter your password. Enter your password to complete the reservation.
**
Note: The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
GB 34
Download from Www.Somanuals.com. All Manuals Search And Download.
**
6.2 Finding a Programme
You can sufficiently find the programme you want by programme name or genre.
1. Press the GUIDE
button.
2. Press the BLUE button.
3. Enter the programme name directly using the
keyboard displayed on the screen.
**
Note: If you select Previous or Next on the keyboard
displayed on the screen and press the OK
button, the keyboard layout is switched.
**
4. When entering programme name is complete,
select Find and press the OK
button.
5. If you select a programme from the results,
press the OK button to watch the
programme if it is on air or reserve your
programme if it is the future programme.
6. Select By Genre and press the OK
button
button.
to search programme by genre.
7. Select the genre and press the OK
8. Select the programme you want from the
results and press the OK
button to watch
the programme immediately or reserve the
programme. If you want to find another
programme, press the BLUE button to display
the keyboard screen.
**
Note: The results of the finding programme may
differ depending on the provided programme
information.
GB 35
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Programme Guide
**
6.3 Viewing Reserved Programme
You can add or edit reserved programmes by viewing the reserved programme list.
1. Press the GUIDE
button.
2. Press the YELLOW button.
**
1. Editing a Reserved Programme
1. Select the scheduled programme and press the
OK
button to edit the reservation
information.
2. Change Start Time/End Time using the
button and the NUMERIC(0~9) buttons.
3. Change Repeat mode using the
button.
The options are Once, Daily and Weekly.
4. Select Delete and press the OK
button to
button to
button to cancel.
delete the reserved programme.
5. Select Save and press the OK
complete.
6. Select Cancel and press the OK
GB 36
Download from Www.Somanuals.com. All Manuals Search And Download.
**
2. Adding a Reservation
1. Select a blank space and press the OK
button to add a new reservation schedule.
2. Enter Channel No. using the NUMERIC(0~9)
buttons. The channel name is automatically
displayed by channel number.
3. Enter Start Time/End Time using the
button and the NUMERIC(0~9) buttons.
4. Select one of Repeat mode options among
Once, Daily and Weekly using the
button.
5. Select Save and press the OK
button to
complete.
6. Select Cancel and press the OK
button to cancel the reservation.
**
Note:
•
If the programme is overlapped with another programme, adjust the reservation
appropriately.
•
•
If the channel is locked, restricted by watching time, you will be prompted to enter your
password to complete the reservation.
The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
GB 37
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Setting Preferences
**
You can set censorship, watching time and all other items suitable for your environment.
**
Note:
•
Press the BACK
Press the MENU
or button to save the changes and return to the previous menu.
or EXIT button to exit the menu screen.
•
You can easily select any item from the menu using the NUMERIC(0~9) buttons.
7.1 Parental Control
You can set parental control for each programme and watching time. You can also change your
password.
1. Press the MENU
2. Select Preferences using the
press the OK or button.
3. Select Parental Control using the
and press the OK or button.
button.
button and
button
4. When prompting message is displayed to
request your password, enter the password
using the NUMERIC(0~9) buttons. The default
password is 0000.
1. Censorship Classification
Censorship Classification allows you to block programmes according to the age level you
have set.
1. Select Censorship Classification using the
button and press the OK
or button.
2. Select the required age level using the
button and press the OK button.
**
View All All programmes can be watched
because there is no age limitation.
7
Programmes are blocked for
children under the age of 7.
12
Programmes are blocked for
children under the age of 12.
15
18
Programmes are blocked for children under the age of 15.
Programmes are blocked for children under the age of 18.
Lock All Programmes are blocked without considering the age level.
GB 38
Download from Www.Somanuals.com. All Manuals Search And Download.
**
Note:
•
You have to enter the password to watch the programme which is blocked by the age
level.
•
•
The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
Some broadcasting companies do not broadcast the censorship classification
information.
2. Allow Time Control
You can block programmes according to the watching time for all the channels.
1. Select Allow Time Control using the
button.
2. Select Enable/Disable using the OK
or
button.
Enable You can watch a programme only
during the time specified by the allow
time.
Disable You can watch a programme
whenever you want regardless of the
allow time.
**
**
3. When you have selected Enable, set Start
Time/End Time using the NUMERIC(0~9)
buttons and press the OK
button.
4. If you wish to cancel the entered time, select
Cancel and press the OK button.
**
Note:
•
Once the setting has been completed, you can
watch programme only during the time specified
by the allow time. Otherwise you will need to
enter the password to watch any programme
during unspecified time.
•
The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
GB 39
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Setting Preferences
**
3. Change Password
You can change the existing password.
1. Select Change Password using the
button and press the OK
or button.
2. Enter New Password using the
NUMERIC(0~9) buttons, select OK and press
OK
button.
3. Enter New Password again to confirm Verify
Password and press the OK button.
Note: The default password is 0000. If you have
forgotten your password, please contact your
local product distributor.
7.2 Language Setting
You can set the language for menu, audio and subtitle.
1. Press the MENU
2. Select Preferences using the
press the OK or button.
3. Select Language Setting using the
button.
button and
button and press the OK
or button.
1. Menu/Audio/Subtitle Language
You can set the language for menu, audio and subtitle.
1. Select Menu/Audio/Subtitle Language using the
button.
button and press the OK
or
2. Select the language using the
button and press the OK
button.
GB 40
Download from Www.Somanuals.com. All Manuals Search And Download.
**
2. Audio Priority
You can select the priority of audio.
1. Select Audio Priority using the
button.
2. Select one option from PCM and Dolby Digital using the OK
or button.
PCM
You can connect the audio output to the general audio source
including the TV.
Dolby Digital
You can listen to sound in Dolby Digital mode. When Dolby
Digital is selected, the audio language cannot be changed.
**
Note: You can choose the Dolby Digital audio stream whenever possible by selecting Dolby
Digital in Audio Priority.
3. Subtitle Display
You can select whether or not to display the subtitle automatically if provided.
1. Select Subtitle Display using the
button.
2. Select one option from Auto and Manual using the OK
or button.
Auto
Subtitles are displayed automatically in the predefined subtitle language.
Subtitles are displayed in the language when you select the subtitle language
Manual
by pressing the SUBTITLE
button on the remote control.
4. Subtitle Font
You can select the subtitle font.
1. Select Subtitle Font using the
button.
2. Select one option from Variable and Fixed using the OK
or button.
Variable
Fixed
Uses the horizontally variable subtitle font.
Uses the fixed subtitle font.
GB 41
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Setting Preferences
**
7.3 Time Setting
You can specify the Power On/Off time.
1. Press the MENU
2. Select Preferences using the
press the OK or button.
3. Select Time Setting using the
press the OK or button.
button.
button and
button and
1. Power On
You can set the time when the product is automatically powered on.
1. Select Power On using the button.
2. Select Enable/Disable using the OK
or
button.
Enable
Uses Power On and sets the Power
On time.
Disable
Does not use Power On.
**
3. When you have selected Enable, enter
Channel No. and Time using the
NUMERIC(0~9) buttons and press the OK
button.
GB 42
Download from Www.Somanuals.com. All Manuals Search And Download.
**
2. Power Off
You can set the time when the product is automatically powered off.
1. Select Power Off using the
button.
2. Select Enable/Disable using the OK
or button.
Enable
Disable
Uses Power Off and sets the Power Off time.
Does not use Power Off.
**
3. When you have selected Enable, enter Time using the NUMERIC(0~9) buttons and
press the OK button.
**
Note: Once Power On/Off is specified, it is repeated everyday.
7.4 Schedule
You can reserve a programme and watch it anytime you want.
1. Press the MENU
2. Select Preferences using the
press the OK or button.
3. Select Schedule using the
press the OK or button.
button.
button and
button and
4. The reserved programmes will be displayed in
time order. Select the programme you want to
edit and press the OK
blank space and press the OK
button. Select a
button to
add a new reservation.
**
Note: For detailed information about Schedule, refer to 6.3 Viewing Reserved Programme.
GB 43
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Setting Preferences
**
7.5 A/V Control
You can set the audio or video output control.
1. Press the MENU
2. Select Preferences using the
press the OK or button.
3. Select A/V Control using the
press the OK or button.
button.
button and
button and
1. TV-SCART
You can set TV SCART output.
1. Select TV-SCART using the
button and press the OK
or button.
button.
2. Select one option among CVBS, RGB and S-Video using the OK
2. VCR-SCART
You can set VCR SCART output.
1. Select VCR-SCART using the
button.
2. Select one option from CVBS and S-Video using the OK
or button.
3. Audio Output
You can set the audio output.
1. Select Audio Output using the
button.
2. Select one option from Stereo and Mono using the OK
or button.
GB 44
Download from Www.Somanuals.com. All Manuals Search And Download.
**
4. Screen Ratio
You can set the aspect ratio of your TV.
1. Select Screen Ratio using the
button.
2. Select one option from 4:3 and 16:9 using the OK
or button.
5. Display Format
You can select the display format according to TV screen ratio.
1. Select Display Format using the button and press the OK
or button.
2. If the Screen Ratio is set to 4:3, you can select one among 16:9 Letter Box, 14:9
Letter Box, Center Mode and Auto using the
button, and press the OK
button.
**
Note: If the Screen Ratio is set to 16:9, Display Format is deactivated.
7.6 Miscellaneous Settings
1. Press the MENU
2. Select Preferences using the
press the OK or button.
3. Select Miscellaneous Settings using the
button.
button and
button and press the OK
or button.
1. i-Plate Display Time
You can set the duration the information box is to be displayed when you switch the channel.
1. Select i-Plate Display Time using the button and press the OK or button.
button and press the OK
2. Select a value between 1~20 seconds using the
button.
**
Note: When it is set to Disable, the i-Plate will not be displayed when you switch the channel.
GB 45
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Setting Preferences
**
2. OSD Transparency
You can set the transparency of On Screen Display (OSD).
1. Select OSD Transparency using the
button and press the OK
or button.
2. Select one option among Disable, 25, 50 and 75 using the
button and press the
OK
button.
Disable
Fully opaque screen
As the number is bigger, the screen is more transparent.
25, 50, 75
3. Option in CH List
You can set whether or not to display the scrambled icon in channel list.
1. Select Option in CH List using the button.
2. Select one option from On/Off using the OK
or button.
Scramble icon is displayed in the channel list.
On
Off
Scramble icon disappears from the channel list.
GB 46
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Installation
**
This chapter describes how to search for channels and a series of procedures.
8.1. Channel Search
If your product is connected to the cable and television, you can search channels manually by
searching parameters, if you know the MUX information.
1. Press the MENU
2. Select Installation using the
press the OK button. You will be prompted
button.
button, and
to enter your password.
3. Select Channel Search using the
button,
and press the OK
or button.
1. Frequency
1. Select Frequency using the
press the OK or button.
2. Enter the frequency using the NUMERIC(0-9)
buttons and press the OK button.
button, and
2. Symbol Rate
1. Select Symbol Rate using the
and press the OK or button.
2. Select the symbol rate value using the
button, and press the OK button.
button,
3. When you select User Define to set symbol
rate manually, enter symbol rate value using
the NUMERIC(0~9) button.
GB 47
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Installation
**
3. Network ID
1. Select Network ID using the
button, and
press the OK
2. Enter the network ID using the NUMERIC(0-9)
buttons and press the OK button.
or button.
4. Search
You can complete the setting and start searching.
1. Select Search and press the OK
button to
start Channel Search.
2. Wait while the product searches for the
channels, this may take a few minutes.
3. During operating search, the cursor is located
at Stop. Therefore, if you press the OK
button during searching, the operation is
stopped and only the channels found so far will
be displayed.
**
4. If the search operation is successfully
completed, and no channels are found, press
the OK
button and try to reset the search
operation again if necessary.
5. When completing channel search, select Save,
and press the OK
button to save the
changes.
GB 48
Download from Www.Somanuals.com. All Manuals Search And Download.
**
8.2 Software Update
For detailed information on updating software, refer to Chapter 9. Software Update.
8.3 Default Setting
Default Setting restores the product to the default settings.
**
Warning:
Please note that once you perform the default setting, all data such as the
channel list and user configured data are deleted.
1. Press the MENU
2. Select Installation using the
press the OK or button.
button.
button and
3. Enter the password using the NUMERIC(0~9)
buttons.
4. Select Default Setting using the
press the OK or button.
5. Select Yes and press the OK
restore all setting to the factory default. Select
No and press the OK or BACK button
to return to the previous menu.
button
button to
**
6. Confirm again to start loading default setting.
Enter the password using the NUMERIC(0~9)
buttons to perform restoring.
7. When completing the default setting, the
installation wizard will run automatically. For
detailed information about the installation
wizard, refer to the Chapter 3. Installation
Wizard.
**
Note: The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
GB 49
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Software Update
**
In order to maintain proper performance of the product, it is essential to have the most
up-to-date software. Visit the Humax website to check the latest news and newly released
software versions.
It is recommended that you periodically check for the availability of software update.
9.1 OTA (Over the Air)
OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software for
equipment through cable. The manufacturers reserve the right to decide when and where an
update is made available. The new software version is then downloaded via cable. The software
update via cable will only occur under the following circumstances.
1. The equipment should have appropriate loader software.
Caution: Please note that if normal loader software is not equipped, the product may
not be updated or operate properly after software update.
**
2. The manufacturer transmits the software via cable.
**
Caution:
•
Please be careful to keep the power on and the power cord plugged in during software
update. If the power is off during software update, fatal damage may be caused to the
product.
•
Please be careful not to pull out the RF cable during software update. Update may be
interrupted and the product may not operate.
**
Note:
•
The product will not activate while software update takes place.
It may take 5 ~10 minutes to update software.
•
•
Scheduling operation cannot work during software update.
GB 50
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1. If new software is found when powering on
1. A message will be displayed to notify that new software is found.
2. Select Yes and press the OK
button to update the software.
3. Starts downloading new software. Please wait until the update is completed.
4. When completing the software update, the product is automatically powered off and on
again.
2. If a new version of software is detected during watching a
programme
1. A message will be displayed to notify that new
software is found.
2. Select Yes and press the OK
button to
start upgrading. Select No and press the OK
button to return to the previous screen.
GB 51
Download from Www.Somanuals.com. All Manuals Search And Download.
10. System Information
**
You can view all system information, signal strength and Smartcard information.
1. Press the MENU
2. Select System using the
press the OK or button.
button.
button and
10.1 Status
You can view system information.
1. IRD Status
1. Select Status the
OK or button.
2. Select IRD Status using the
press the OK or button.
button and press the
button and
3. The IRD information will be displayed.
2. Loader Status
1. Select Status the
OK or button.
2. Select Loader Status using the
and press the OK or button.
3. The loader information will be displayed.
button and press the
button
GB 52
Download from Www.Somanuals.com. All Manuals Search And Download.
**
10.2 Signal Detection
You can view the signal strength and signal quality.
1. Select Signal Detection using the
and press the OK or button.
button
2. Display information about the graphs and
percentage of signal strength and quality of the
channel.
10.3 Conditional Access
You can check the information of the Conditional
Access components.
10.4 Mail Messages
You can receive mail sent by the broadcasting
company. When a new mail arrives, the envelope icon
will appear on the screen. Urgent message will be
displayed on the screen while you are watching a
programme. Select a mail and press the OK
button to read the mail
GB 53
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Games
**
This product provides various games for user's entertainment.
1. Press the MENU
2. Select Games using the
the OK or button.
button.
button and press
3. According to the instruction displayed on
screen, you can enjoy the game using using the
button and OK
button.
**
Note: Press the EXIT
or BACK
button to exit the game.
You can also enjoy the games by pressing the GAME
button.
GB 54
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Menu Map
**
GB 55
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Troubleshooting
**
13.1 Trouble Shooting
Before contacting your local service centre, please read the tips below carefully. If the problem
persists after completing the following procedure, please contact your local product distributor or
service centre for further instructions.
**
1. No message displayed on the front panel. (The product will not switch on.)
**
-
-
-
-
Check the main power cable and make sure it is plugged into a suitable power outlet.
Check that the mains supply is switched on.
Check that the power switch is on at the rear of the product (where applicable).
Connect the power cable to a different power outlet.
2. No picture on TV set
**
-
Make sure that the product is power on and in operation mode (Press the STANDBY
button).
-
-
-
-
-
Make sure that the AV cable is firmly connected to the TV.
Make sure that the cable is properly connected to the product.
Check that you search channels in the menu.
Check the brightness level of the TV.
Check if the channel is currently on air. Contact the broadcaster to ensure that the
channel is running.
-
Press the SOURCE button if the product is in external input mode.
3. Poor picture & sound quality
**
-
Make sure there is no mobile phone or microwave oven near the equipment.
4. No/poor sound
**
-
-
-
-
Check that your AV cable is connected correctly.
Check the volume levels of your TV set and the product.
Check if the product or TV is on mute.
Check audio type or soundtrack option in the AV menu.
5. Remote control does not operate.
**
-
To control the product., the top end of the remote control should point directly towards
the receiving part of the product.
-
-
Remove and reinsert the batteries in the remote control.
Replace the batteries in the remote control for a new set.
6. Cannot make reservations.
**
-
-
Check that no previous reservations are conflicting with the new reservation.
Check that the product is switched on at the time of the reservation.
GB 56
Download from Www.Somanuals.com. All Manuals Search And Download.
**
7. Cannot watch scrambled channels.
**
-
Check that you have the appropriate Smartcard. Reinsert the Smartcard and make
sure it initializes correctly.
-
-
Check in the menu that the product is detecting the Smartcard.
Check in the menu that you have a valid and working subscription to the channels
you wish to view.
-
Ensure that the Smartcard is not damaged.
8. No password information is given.
**
-
The default password is always 0000.
9. Channel search does not work.
**
-
Check that your cable is connected correctly.
10. Cannot update new software.
**
-
You can get an update. If the product does not show a message requesting update,
that means no software is available.
11. Cannot watch pay channels.
**
-
Check in the menu that you have a valid and working subscription to the channels
you wish to view.
GB 57
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Troubleshooting
**
13.2 Error Message
Error message
Possible causes
What to do
Please Insert
Smartcard
The Smartcard is not present
Insert the Smartcard.
Unknown
Smartcard
Faulty Smartcard or not an Irdeto
Smartcard.
Insert the appropriate Smartcard.
Contact the product distributor if the
problem persists.
Smartcard Failure
The current Smartcard may be
faulty.
Insert the appropriate Smartcard.
Contact the product distributor if the
problem persists.
Checking
Smartcard
The Smartcard is being verified. It
may be inserted up-side down.
Service is currently The Smartcard has expired or the
Check Smartcard. Contact the
product distributor if the problem
persists.
scrambled
datecode on the card has gone
backwards.
Service Unknown
No service is located at the entered
channel number.
Service is currently Operating status of the service is set
not running
to Off.
Parental Control
Lock
When the parental rating of the
event is greater than the setting
made via the Parental Control
menu.
Enter the PIN-code or reset the
settings.
No Event
Information
The information for the current event
or service has not been received,
No Signal
The signal is too weak.
Reset the cable.
No Service
available
There are no services available.
Reset the setting and restart
channel search.
GB 58
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Specification
**
Tuner and Channel
Input Connector
Frequency Range
Input Impedance
Signal Level
IEC-type, IEC-169-2, Female
47MHz to 862MHz
75
-13 to +15 dBm
Demodulation
QAM
Input Symbol Rate
Constellation
1.5-7Ms/s
16-QAM, 32-QAM, 64-QAM, 128-QAM, 256-QAM
MPEG Transport Stream A/V
Decoding
Transport Stream
MPEG-2 ISO/IEC 13818
Transport Stream Specification
MPEG2 MP@ML
Profile Level
15 Mbit/s Max
Input Rate
Aspect Ratio
Video Resolution
Audio Decoding
Audio Mode
4:3, 16:9, 14:9, Letter Box
720 x 576 / 720 x 480
MPEG/MusiCam Layer I and II
Single channel/Dual channel/Joint Stereo/Stereo
Memory
Flash Memory
Graphic (MPEG) DRAM
EEPROM
2M bytes
16M bytes
8K bytes
GB 59
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Specification
**
A/V and Data In/Out
Video
Audio
SCART Video Output (CVBS, RGB, S-Video)
SCART Volume and Mute Control
(Resolution: 20 bits DAC, MAX, 2Vrms)
Digital Audio Output, Fiber-Optic (Resolution: 20 bits)
S/PDIF
Power Supply
Input Voltage
Type
90~250V AC, 50/60Hz
SMPS
Max. 10 W
Power Consumption
Standby Power
Protection
Max. 5 W
Separate internal fuse & Lightning protection
Physical Specifications
Size
260mm x 50mm x 182mm
1.2 Kg
Weight (Net)
Operating Temp
Storage Humidity
0
to + 45
5% ~ 95% RH(Non-Condensing)
GB 60
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Glossary
**
EPG (Electronic Programme Guide)
An electronic equivalent to a printed television listings magazine; it is an application used with
digital set-top boxes and digital television sets to list current and scheduled programs that are or
will be available on each channel, including a short summary or commentary for each program.
The information supplied in the EPG is sent and updated by the channel broadcaster.
**
Frequency
The property of a signal measured in cycles per second (=Hz).
**
Hi-Fi (High Fidelity)
The characteristics of audio devices that can play back all the audio frequencies a person can
detect, which is the range of 16Hz#20KHz. Sometimes it is used to indicate good quality of
audio devices such as stereo tape recorders.
**
OSD (On Screen Display)
OSD displays the basic information necessary for the users to configure monitor or TV settings.
OSD information may include brightness, contrast, tuning, RGB adjustment, and screen size
and position.
**
OTA (Over the Air) or OAD (Over Aerial Download)
A standard for the transmission of software for equipment, through a broadcast system.
Manufacturers reserve the right for deciding the release of the software for their products.
**
SCART
A 21-pin connector standard to connect two pieces of Audio-Visual equipment such as a TV and
a VCR. Each device will have a 21-pin female connection; a cable with male connection at both
ends is used for connecting the devices.
**
S/PDIF (Sony/Philips Digital Interface format)
A standard format for the transfer of digital audio signals. It allows the transfer of digital audio
between two devices without any conversion to and from analogue, which could degrade the
signal quality.
**
Smartcard
A credit card sized card that contains updateable chip memory. It is used for accessing Pay TV
(encrypted) channel or services when inserted into an appropriate receiver.
GB 61
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Service en ondersteuning
**
If you are faced with any problem you should contact your Humax dealer. For information
Distributor for the Netherlands:
Revah European
Hoevenweg 13 5652, AW Eindhoven
Tel.:
+31 40 291 11 00
Fax.:
+31 40 291 11 99
E-mail:
Website:
GB 62
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|