HP 618 Digital Camera
HP Imaging Technology
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 1: Introduction ............................................................................................................................................................. 5
Product Overview ...................................................................................................................................................... 5
What’s in this Guide ..................................................................................................................................................6
How to Use this Guide ..............................................................................................................................................7
Related Information ..................................................................................................................................................7
Chapter 2: Preparing to Take Pictures ..............................................................................................................................8
Accessing the Capture Mode and Powering on the Camera ...............................................................8
Using the Status LCD ..............................................................................................................................................9
Using the Image LCD .............................................................................................................................................12
Chapter 3: Taking Pictures .................................................................................................................................................... 16
Taking Simple Point-and-Shoot Pictures .................................................................................................... 16
Taking More Advanced Pictures .......................................................................................................................17
Using the Zoom Lever ...........................................................................................................................................22
Using the Diopter Control ..................................................................................................................................22
Understanding the LEDs on the Camera .....................................................................................................23
Using Instant Review ..............................................................................................................................................25
Recording Sound .................................................................................................................................................... 26
Chapter 4: Viewing and Reviewing Images ..................................................................................................................27
Using Playback Mode ...........................................................................................................................................27
Using Review Mode ...............................................................................................................................................30
Chapter 5: Sharing Images ...................................................................................................................................................38
Transferring Images to Your Computer .......................................................................................................38
Using a Digital Print Order Format (DPOF) File ......................................................................................44
JetSending Images to a Printer .......................................................................................................................46
Transmitting Images Between Two Cameras ............................................................................................48
Connecting the Camera to Your Television ..............................................................................................50
Chapter 6: Menu and Soft Key Reference ....................................................................................................................52
Capture Mode Menus and Soft Keys ............................................................................................................52
Playback Mode Menu and Soft Keys ............................................................................................................74
Review Mode Menus and Soft Keys ...............................................................................................................78
HP 618 Digital Camera User’s Guide
3
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Troubleshooting ................................................................................................................................................ 88
Troubleshooting Common Problems .......................................................................................................... 88
Contacting HP Customer Care .........................................................................................................................93
Appendix A: Using the Preferences Menu ...................................................................................................................94
Accessing the Preferences Menu ....................................................................................................................94
Setting the Display ................................................................................................................................................ 95
Controlling Camera Sounds .............................................................................................................................97
Formatting the Memory Card .......................................................................................................................... 98
Selecting the PC Connect Mode ..................................................................................................................... 98
Setting the Date and Time .................................................................................................................................99
Setting the Image Counter ..............................................................................................................................100
Naming Your Camera ......................................................................................................................................... 101
Selecting a Language ........................................................................................................................................ 102
Resetting Camera Settings .............................................................................................................................. 102
Appendix B: Camera and Accessories Information ...............................................................................................103
Camera Specifications ........................................................................................................................................103
Battery Life ..............................................................................................................................................................106
HP Accessories for Powering the Camera .................................................................................................107
Storage Capacities of Memory Cards ........................................................................................................109
Appendix C: Product Warranties ..................................................................................................................................... 110
Limited Product Warranty ................................................................................................................................. 110
Hewlett-Packard Year 2000 Warranty ........................................................................................................112
Appendix D: Product Safety and Regulatory Information ................................................................................. 113
Safety Information ................................................................................................................................................ 113
Regulatory Notices ................................................................................................................................................114
Glossary .......................................................................................................................................................................................115
Index ..............................................................................................................................................................................................125
HP 618 Digital Camera User’s Guide
4
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Introduction
Welcome to the HP 618 Digital Camera User’s Guide. This guide will help you take high-quality
pictures quickly and easily with your HP 618 digital camera.
Product Overview
The HP 618 is a versatile, point-and-shoot digital camera. It provides these key features:
Š
Š
Š
Š
Š
Š
HP Imaging Technology
3x optical /2x digital zoom
Three image type settings − One Shot, Continuous, and Timelapse
Two focus modes − Auto and Manual
Three auto focus range settings − Normal, Macro, and Infinity
Six exposure settings − Auto, Landscape Program, Portrait Program, Action Program,
Aperture Priority, and Shutter Priority
Š
Š
Built-in flash with seven flash modes − Auto, Auto with Red-Eye Reduction, Forced On,
Forced On with Red-Eye Reduction, Forced Off, Night, and Night with Red-Eye Reduction
Three timer modes − Off, 10-Second Timer, and 3-Second Remote
Note: For more detailed information about the
camera’s features, see “Camera Specifications”
on page 103.
Your camera comes equipped with four operating modes (see Table 1). To set the mode, turn the
camera mode dial on top of the camera to the mode you want to use.
Note: Capture, Playback, and Review modes
have menus and related soft keys you can use
to change your camera’s settings and to edit
and organize images. (PC Connect mode does
not have menus or soft keys.)
Table 1: Camera Modes
Mode
Use this Mode to...
Capture
Playback
Take pictures (or “capture images”).
View the captured images in a variety of ways. You can
view images full screen, play back timelapse and grouped
image sequences, and create slideshows of images.
Sort and edit the captured images in a variety of ways. For
example, you can group, categorize, delete, and search for
captured images.
Review
PC Connect
Transfer images from the camera to a computer.
Chapter 1: Introduction
5
Product Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in this Guide
This User’s Guide provides all the “how to” and reference information you need to use your
camera successfully.
Part of Manual
What is Covered
“Chapter 2: Preparing to Take Pictures”
How to adjust settings in the status LCD, image LCD, and Capture mode
menus to prepare your camera to take pictures.
“Chapter 3: Taking Pictures”
How to take simple point-and-shoot pictures, as well as more advanced
pictures. Also how to use the zoom, Instant Review, and the sound
recording features.
“Chapter 4: Viewing and Reviewing
Images”
How to view images full screen, play back timelapse and grouped image
sequences, and create slideshows of images in Playback mode. Also how
How to share images by transferring them to your computer, JetSending
them to a printer, transmitting them to other cameras and printers, and
viewing them on a television.
“Chapter 6: Menu and Soft Key Reference”
“Chapter 7: Troubleshooting”
What each of your camera’s menus and related soft keys do.
How to fix common problems when using the camera, and how to contact
HP Customer Care for help, if needed.
“Appendix A: Using the Preferences Menu”
How to use the Preferences menu to change a variety of your camera’s
general settings.
“Appendix B: Camera and Accessories
Information”
Specifications for the camera, as well as information about some of the
accessories that the camera supports.
“Appendix C: Product Warranties”
Limited product warranty and the HP Year 2000 warranty for the camera.
“Appendix D: Product Safety and
Regulatory Information”
Safety information and regulatory notices regarding the camera and
some of its accessories.
“Glossary”
“Index”
Definitions of the terms related to your camera that are used throughout
this guide and in the camera’s Quick Start Guide.
Where to find particular topics about your camera throughout this guide.
Chapter 1: Introduction
6
What’s in this Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Use this Guide
You can use this guide online, or you can print it out. The main advantage of using it online is that
you can use its built-in searching and linking capabilities on your computer to quickly find the
information you need. Of course, an advantage of having a print-out is that you can take it anywhere
you want to use your camera. You may also prefer to read information about your camera from a
printed version, rather than on a computer screen.
Note: If you choose to print this guide, be aware
that printing it in color may take a long time.
Therefore, you may want to print this guide in
black and white, instead.
This online guide is provided in Adobe® Acrobat® version 4.0 (.pdf) format. To learn how to use
Acrobat’s searching and linking features, see the online Help for the Acrobat software.
To print this guide, select Print from Acrobat’s File menu. In the Print dialog box, either click the OK
button to print the entire guide, or specify the Print Range of pages you want and then click OK.
Related Information
For a complete listing and description of your camera’s features, including diagrams showing the
locations of all the buttons, dials, displays, and so on, see the printed HP 618 Digital Camera Quick
Start Guide that was included with your camera. Along with helping you use your camera for the first
time to capture and view images, the Quick Start Guide also explains how to transfer images from the
camera to your computer.
Note: It is assumed that you have already used
the HP 618 Digital Camera Quick Start Guide to
install the batteries and the memory card in
your camera.
To learn how to use the software that came with your camera, see the software’s online Help. All the
documentation for the software is provided in the form of online Help within the software itself.
Finally, you can get project ideas, troubleshooting assistance, and up-to-date information about
your camera and the HP Photo Imaging Software from the HP website at:wwwwww.h.hpp.c.coomm//pphhoottoossmmaarrtt.
Updates for your camera’s firmware are also posted to this website from time-to-time. You can
install these updates on your camera so that you can always have the most current functionality
running on it.
Chapter 1: Introduction
7
How to Use this Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Preparing to Take Pictures
Overview
You can use your camera’s default settings to take pictures in a point-and-shoot fashion, or you can
use more advanced features that you set via the camera’s status LCD and image LCD. This chapter
explains how to prepare your camera to take pictures by adjusting various settings on it.
This chapter covers the following topics:
Š
Š
“Accessing the Capture Mode and Powering on the Camera” on page 8
“Using the Status LCD” on page 9
Š
Š
Š
“Setting the Flash Mode” on page 10
“Setting the Timer Mode” on page 11
“Setting the Auto Focus Range” on page 11
Š
“Using the Image LCD” on page 12
Š
Š
Š
Š
Š
Š
“Setting the Image Type” on page 13
“Understanding the Text Message Area” on page 12
“Viewing the Camera Status” on page 14
“Using the Overlay Soft Key” on page 14
“Using the Capture Mode Menus” on page 15
“Using the 4-Way Controller” on page 15
Accessing the Capture Mode and Powering on the Camera
Figure 1: Setting the Camera to Capture Mode
To prepare your camera to take pictures, you must first set your camera to Capture mode and power
on the camera:
1 Turn the camera mode dial on the top of the camera to
(see Figure 1).
2 Power on the camera by sliding the ON/OFF power switch on the back of the camera to the
right and releasing it. The status LCD on the top of the camera turns on and displays the status
of the camera.
Chapter 2: Preparing to Take Pictures
8
Accessing the Capture Mode and Powering on the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Status LCD
Figure 2: Status LCD Indicators
The status LCD conveys important information about the camera’s status. The status LCD shows you
the status of the camera’s batteries, the settings for the flash mode, timer mode, and auto focus
range, as well as the number of pictures remaining on the memory card (see Figure 2).
Auto
Battery
status
focus
range
The status LCD turns on every time you power on the camera. You can use the status LCD to assess
the current status of the camera, and to change the flash mode, timer mode, and auto focus range
settings when preparing to take pictures.
Pictures
remaining
Flash
mode
Timer
mode
The buttons beneath the status LCD − the flash mode button
, the timer mode button
, and
the auto focus range button − toggle the associated camera settings on and off within the
status LCD (see Figure 3). To change one of these settings, press the associated button until you see
the desired icon or set of icons displayed in the status LCD for the setting you want.
Figure 3: Status LCD Buttons
The next three subsections explain the possible settings for the flash mode, timer mode, and auto
focus range on the camera.
Flash mode Timer mode Auto focus range
Note: If you see 000 flashing in the status
LCD, this means that either there is no memory
card in the camera, or the memory card is full.
Chapter 2: Preparing to Take Pictures
9
Using the Status LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Flash Mode
Your camera has seven flash modes. The default flash mode is Auto (no icons displayed). Each mode
is displayed on the status LCD with the icon(s) shown in Table 2. To set the flash mode, press the flash
mode button
beneath the status LCD to toggle through the icons on the status LCD until you see
the flash mode setting you want (see Table 2).
Note: The flash mode setting remains set
between shots, but will return to Auto after you
cycle the power on the camera (power it off and
then on again).
Table 2: Flash Mode Settings
Icon Displayed
Flash Mode
When to Use
Auto (default)
No Icon
To allow the camera to determine the need for flash
based on the lighting conditions.
If the batteries’ charge is low, the camera will
not take a picture if the flash mode is set to
Forced On or Night, and it will disable the flash
if set to Auto.
Auto with Red-Eye
Reduction
To allow the camera to determine the need for flash
based on the lighting conditions. When flash is used,
red-eye reduction minimizes the occurrence of red-
eye in pictures of people or animals by flashing twice.
Also note that flash pictures may be over-
exposed when using the Macro auto focus
range (see “Setting the Auto Focus Range” on
page 11). Thus, you may want to turn off the
flash (set the flash mode to Forced Off) when
taking pictures with the Macro auto focus
range setting.
Forced On
To use the flash, regardless of the lighting conditions.
Forced On with Red-Eye
Reduction
To use the flash, regardless of the lighting conditions.
Red-eye reduction minimizes the occurrence of red-
eye in pictures of people or animals by flashing twice.
Forced Off
Night
To take pictures without flash, regardless of the
lighting conditions.
To use a slow sync mode of the flash in which the
camera collects the image background with the
available light and flashes to illuminate the
foreground of the image.
Night with Red-Eye
Reduction
To use a slow sync mode of the flash in which the
camera collects the image background with the
available light and flashes to illuminate the
foreground of the image. Red-eye reduction
minimizes the occurrence of red-eye in pictures of
people or animals by flashing twice.
Chapter 2: Preparing to Take Pictures
10
Using the Status LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer Mode
Note: The 10-Second Timer mode is disabled
for the Timelapse image type. (See “Setting the
Image Type” on page 13.)
Your camera has three timer modes. The default timer mode is Off. Each mode is displayed on the
status LCD with the icon shown in Table 3. To set the timer mode, press the timer mode button
beneath the status LCD to toggle through the icons on the status LCD until you see the timer setting
you want (see Table 3).
Note: After each timed exposure in 10-Second
Timer mode, the camera will default to the Off
timer mode setting. You must reset the timer to
take another timed picture. In contrast, the
3-Second Remote timer mode setting remains
set shot-to-shot.
Table 3: Timer Mode Settings
Timer Mode
Off (default)
Icon Displayed
When to Use
No Icon
To take pictures without using the timer.
10-Second Timer
To take a picture 10 seconds after
pressing the shutter release button.
3-Second Remote
To use the remote infrared trigger on the
HP Remote Control (included with the
camera), which has a 3-second delay.
Note: The auto focus range remains set
between shots, but returns to Normal after you
cycle the power on the camera (power it off and
then on again).
Setting the Auto Focus Range
You can choose from three auto focus ranges that are available via the status LCD. The default auto
focus range is Normal. Each range setting is displayed on the status LCD with the icon shown in
Table 4. To set the auto focus range, press the auto focus range button
to toggle through the icons on the status LCD until you see the setting you want (see Table 4).
beneath the status LCD
If you change the focus mode from Auto to
Manual Focus in the Photo Assist menu (see
“Using the Capture Mode Menus” on page 15),
the auto focus range is cancelled.
Table 4: Auto Focus Range Settings
If you set the camera to the Macro auto focus
range, the image LCD will turn on. This is
Auto Focus Range
Icon Displayed
When to Use
because you will be unable to frame an image
properly in the viewfinder due to parallax error.
No Icon
To take a picture of a subject that is within the normal
focus range (neither close-up nor in the distance).
The focus range is set from 0.5 meters to infinity.
Finally, if the camera cannot focus when set to
the Normal auto focus range, it will make a
“best guess” at the focus and take the picture.
However, if it cannot focus when set to Macro, it
will not take a picture.
Macro
To take a close-up picture of a subject, such as a flower.
The focus range is set from 0.1 to 0.6 meters.
Infinity
To take a picture of a subject in the distance, such as a
mountain range. The focus range is set at infinity.
Chapter 2: Preparing to Take Pictures
11
Using the Status LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Image LCD
Figure 4: Image LCD Screen in Live View
Top
overlay bar
shows status
Turn the image LCD on by pressing the DISPLAY button on the back of the camera. You now see the
live view of Capture mode on the image LCD. Live view lets you preview the pictures you can take
with the camera, as well as view and change some of the camera’s settings.
The image LCD screen in the live view of Capture mode includes two opaque overlay bars and an
image area in the center for viewing your picture subjects (see Figure 4). The top overlay bar displays
status information about the camera while you are taking pictures. The bottom overlay bar contains
labels that describe the function of the soft keys immediately below them. For example, if you press
the right (Status) soft key in Capture mode, the Status screen displays. To turn the overlay bars off or
on, press the middle (Overlay) soft key.
Bottom
overlay bar
shows soft key
labels
Soft keys
You can also use the image LCD to access menus to change camera settings in the Capture,
Playback, and Review modes, and to play back and review captured images in the Playback and
Review modes, respectively. The image LCD is disabled in PC Connect mode.
Note: By default, the image LCD is turned off
when you power on the camera in Capture
mode. If you want the image LCD to always turn
on instead, you can change the setting in the
Display submenu of the Preferences menu. (See
“Display Submenu” on page 67 and “Setting
the Display” on page 95.)
The following subsections provide more information about the overlay bars and the soft keys in the
live view of Capture mode.
Understanding the Text Message Area
The text message area is a one-line text area in the middle of the top overlay bar. An example text
message is: “Battery Low.” The following indicators will also appear in the text message area when
you change certain settings in the Capture mode menus. For information on using the Capture mode
menus to change camera settings, see “Using the Capture Mode Menus” on page 15.
However, note that the image LCD uses a lot of
battery power. If you are running your camera
on batteries rather than with the HP-approved
AC power adapter, you may want to limit your
use of the image LCD.
Exposure Mode Indicator
When you set the Exposure Mode in the Photo Assist menu to either Landscape Program, Portrait
Program, or Action Program, the current Exposure Mode is displayed in the text message area.
Note: For information on setting the Exposure
Mode, see “Exposure Mode Submenu” on
page 56.
Aperture Value and Shutter Speed Indicators
When you set the Exposure Mode in the Photo Assist menu to Aperture Priority (Av) or Shutter
Priority (Tv), the current aperture value and shutter speed are displayed in the text message area (for
example: Tv 1/125 F5.6). The aperture value and shutter speed will update automatically and change
continually as the camera zooms and measures the exposure. When the camera cannot set the
correct exposure because you have selected an aperture or shutter speed that is too big or small, the
line in the text message area will turn red.
Manual Focus Distance
Note: For information on setting the Focus
Mode, see “Focus Mode Submenu” on page 59.
When you set the Focus Mode in the Photo Assist menu to Manual Focus, the focus distance appears
on the left side of the text message area.
Chapter 2: Preparing to Take Pictures
12
Using the Image LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Macro and Infinity Auto Focus Range Indicators
When the auto focus range is set to Macro, a Macro icon
is displayed on the right side of the text
message area. When the auto focus range is set to Infinity, INF is displayed.
Digital Zoom Indicator
When the camera is in digital zoom, the digital zoom icon is displayed on the right side of the text
message area. For information on digital zooming, see “Using the Zoom Lever” on page 22.
Setting the Image Type
Your camera can take three types of pictures (that is, three “image types”):
Š
Š
Š
One Shot
Continuous
Timelapse
Note: For the Timelapse image type, you can
set the number of images that will be captured
and the interval between them in the Timelapse
Settings submenu of the Capture Settings
menu. (See “Timelapse Settings Submenu” on
page 54.)
The image type is displayed at the left side of the bottom overlay bar in the live view of Capture
mode. Image type settings are listed in Table 5. The default image type is One Shot. To set the image
type, press the left soft key to toggle through the types until you see the image type setting you
want (see Table 5).
Table 5: Image Type Settings
Also note that if the interval you set for
Timelapse image capture is long, the camera
may go into sleep mode (shutting off the image
LCD) between taking pictures to conserve
battery power.
Image Type
When to Use
How to Use
One Shot (default)
When capturing a single image.
Press and release the shutter release
button to capture a single image.
Finally, if you set the Timelapse interval to 15 or
30 sec and you have the File Type set to TIFF,
the camera may skip capturing an image if it is
not finished processing the previous image in
the Timelapse sequence.
Continuous
Timelapse
When capturing a series of
images in rapid succession.
Recommended for action shots.
Hold the shutter release button down.
Continuous images are captured until
you release the button or until the
memory card is full.
When capturing a slow process
with a series of images.
Press and release the shutter release
button, and the camera captures the first
image. Then it displays a countdown to
the next image capture on the top
overlay bar. To cancel, press the Stop
soft key.
Chapter 2: Preparing to Take Pictures
13
Using the Image LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Overlay Soft Key
Press the middle (Overlay) soft key to turn both overlay bars off in the live view of Capture mode. To
turn the overlay bars on again, press any of the three soft keys. When the overlay bars are off, the
soft keys are disabled for their normal functions and are, instead, enabled only to turn the overlay
bars on again.
Viewing the Camera Status
Figure 5: Status Screen
You can press the right (Status) soft key while in the live view of Capture mode to display the Status
screen (see Figure 5). This screen allows you to check the current camera status, such as the current
resolution, quality, and white balance settings. (To change these settings, use the Capture mode
menus. See the next subsection for details.) One or more icons may also appear on the Status
screen, including:
Š
Š
Š
means that a memory card is inserted in the camera.
means that the current auto focus range setting is Macro.
shows the battery status.
The following status information is provided:
Resolution setting for capturing images (Full Size or 1/4)
Resolution
Quality
Quality setting for capturing images (Good, Better, or Best for the JPEG file
type, or TIFF for the TIFF file type)
Color correction setting to make white areas appear white with no color cast
Exposure Value compensation setting for exposure control
ISO Speed setting
White Balance
EV Comp
ISO Speed
AE Metering
Version
Auto Exposure Metering setting
The version number of your camera’s firmware
To exit the Status screen and return to the live view of Capture mode, press the right (Exit) soft key.
Chapter 2: Preparing to Take Pictures
14
Using the Image LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Capture Mode Menus
Your camera has four Capture mode menus:
Note: For more information about all of the
Capture mode menus and related soft keys, see
“Chapter 6: Menu and Soft Key Reference”
starting on page 52.
Š
Š
Š
Š
Capture Settings
Photo Assist
Image Stamp
Preferences
For more information about the Preferences
menu, see “Appendix A: Using the Preferences
Menu” starting on page 94.
The Capture Settings, Photo Assist, and Image Stamp menus have settings you can change which
affect the images you capture. The Preferences menu allows you to change a variety of your
camera’s general settings.
Figure 6: Parts of a Menu
To access the Capture mode menus:
1 Set the camera mode dial to Capture mode
2 Power on the camera if you haven’t already.
.
Menu icons
Current
menu’s title
Menu
options
3 Press the MENU button on the back of the camera. The Capture mode menus are displayed on
Overlay
bar
the image LCD (see Figure 6).
Soft keys
4 Press the right or left arrow on the 4-way controller to move across the menu icon bar to access
a particular menu. (See the next subsection, “Using the 4-Way Controller.”)
5 Press the down or up arrow on the 4-way controller to move the highlight to the menu option
you want to select.
6 Press the left soft key to select the highlighted menu option.
Figure 7: 4-Way Controller
Using the 4-Way Controller
The 4-way controller is the large button located on the back of your camera (see Figure 7). Press an
arrow on the 4-way controller to move in the direction of that arrow (up, down, right, or left) in the
image LCD, such as within the menu structures of the Capture, Review, or Playback modes.
Chapter 2: Preparing to Take Pictures
15
Using the Image LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Taking Pictures
Overview
Once you have set your camera to Capture mode and you have a basic understanding of how to use
your camera’s status LCD and image LCD (see “Chapter 2: Preparing to Take Pictures” starting on
page 8), you are ready to take pictures. To optimize your camera’s capabilities, it is important to
understand how to use the zoom lever, what the various LEDs mean when they light solid or blink,
how to use Instant Review, and how to use the sound recording features when taking pictures.
This chapter covers the following topics:
Š
Š
“Taking Simple Point-and-Shoot Pictures” on page 16
“Taking More Advanced Pictures” on page 17
Š
Š
Š
Š
“Using Focus Lock” on page 18
“Shooting a One Shot Image” on page 19
“Shooting Continuous Images” on page 20
“Shooting Timelapse Images” on page 21
Š
Š
Š
Š
Š
“Using the Zoom Lever” on page 22
“Using the Diopter Control” on page 22
“Understanding the LEDs on the Camera” on page 23
“Using Instant Review” on page 25
“Recording Sound” on page 26
Taking Simple Point-and-Shoot Pictures
Note: These instructions for taking simple
point-and-shoot pictures assume that your
camera is set to the default image type (One
Shot), and that Instant Review is on as well.
(See “Setting the Image Type” on page 13 and
“Using Instant Review” on page 25 for more
information.)
1 Set the camera mode dial to the Capture mode
2 Power on the camera if you haven’t already.
.
3 Look through the viewfinder to select and frame a subject for your picture.
Chapter 3: Taking Pictures
16
Taking Simple Point-and-Shoot Pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the shutter release button. Wait for the shutter sound, indicating the camera has captured
the image. Then release the button.
The captured image appears for a 3-second Instant Review period on the image LCD. If you are
happy with it, do nothing, and the image will be saved on the memory card. If not, you can
delete the image while it is still displayed in Instant Review by pressing the middle (Delete)
soft key.
Taking More Advanced Pictures
As explained in Chapter 2: “Preparing to Take Pictures,” your camera has more advanced features
that you can set via your camera’s status LCD and image LCD. Here is the general procedure for
taking more advanced pictures:
2 Power on the camera if you haven’t already.
.
3 Set the flash mode, timer mode, and/or the auto focus range via the status LCD buttons on the
top of the camera, as desired. (For information on these settings, see “Using the Status LCD” on
page 9.) The settings you choose are displayed in the status LCD.
4 Press the DISPLAY button on the back of the camera to turn the image LCD on.
5 Press the left soft key to set the image type (One Shot, Continuous, or Timelapse). (For more
information, see “Setting the Image Type” on page 13.) The image type you choose is displayed
on the left side of the bottom overlay bar in the image LCD.
6 Press the MENU button on the back of the camera to display the Capture mode menus on the
image LCD, if you wish to change any of the default camera settings in the menus.
7 Select the menu options you wish to change in the Capture Settings, Photo Assist, and/or Image
Stamp menus, and then make the changes to the camera settings within those menus, as
desired. (For information about changing settings in these Capture mode menus, see“Capture
Mode Menus and Soft Keys” on page 52.)
For example, if you have set the camera to the Timelapse image type, then you might want to
change the default settings in the Timelapse menu option of the Capture Settings menu. In this
case, you could change the number of images and/or the interval between them for the time-
lapse sequence that you want to shoot.
Chapter 3: Taking Pictures
17
Taking More Advanced Pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Press the right (Exit) soft key to exit the Capture mode menus.
Note: The image LCD uses a lot of battery
power. If you are running your camera on
batteries rather than with the HP-approved AC
power adapter, you may want to limit your use
of the image LCD and use the viewfinder
instead. To turn the image LCD off, press the
DISPLAY button on the back of the camera.
9 Use the image LCD or the viewfinder to select and frame the subject for your picture. If needed,
use the zoom lever (see page 22) to adjust the focal length of the camera lens to zoom in or out
on the picture subject. You can also use the diopter control (see page 22) when looking through
the viewfinder to adjust the focus of the picture subject in the viewfinder. Note that the diopter
control has no effect on the image you capture, however.
If you cannot obtain focus on your picture subject, see the next subsection, “Using Focus Lock.”
Otherwise, go on to the “What’s Next?” subsection.
Using Focus Lock
If you cannot obtain focus on your picture subject, use Focus Lock as follows to get the proper focus:
1 If the main subject of your picture is:
Š
Not within the center of the viewfinder frame or image LCD screen, center the main subject
of your picture in the center of the viewfinder frame or image LCD screen. Go on to step 2.
Š
Near a very bright or dark area, or is behind another object (such as a screen or fence) which
overlaps the subject, focus the camera on another object the same distance from you as the
subject. Go on to step 2.
2 Press the shutter release button halfway down and continue to hold it halfway down. This locks
the focus.
3 Without releasing the shutter release button, recompose the picture as you originally wanted it,
and then press the shutter button all the way down to take the picture. (Also see the following
subsections for how to take pictures for each image type.)
What’s Next?
What you need to do next to actually take a picture depends on the image type you have selected,
and whether or not you have set a timer mode. The following subsections describe how to capture
the image(s), as well as what occurs once you do, for each image type setting.
Chapter 3: Taking Pictures
18
Taking More Advanced Pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting a One Shot Image
If you are using the:
Š
Š
Shutter release button with no timer mode set, press the shutter release button. Wait for the
shutter sound, indicating the camera has captured the image. Then release the button.
10-Second Timer
mode, press and release the shutter release button. The timer LED on the
front of the camera (see page 24) lights solid for 7 seconds. It then blinks for the final 3 seconds
before the camera captures the image.
Š
3-Second Remote
timer mode, point the HP Remote Control at the camera, and press
and release the Remote Control’s trigger button. The timer LED on the front of the camera (see
page 24) blinks faster for 3 seconds. Then the camera captures the image.
If Instant Review is on (see “Using Instant Review” on page 25), you can do any of the following while
the image you just captured is displayed in Instant Review on the image LCD:
Š
Record sound that will be attached to this image. For information on how to do this, see
“Recording Sound” on page 26.
Š
Š
Delete the image by pressing the middle (Delete) soft key.
Save the image to the memory card and return to the Capture mode immediately by pressing
the right (Exit) soft key.
Š
Do nothing and, when Instant Review times out (the default time-out is 3 seconds), the image is
then saved to the memory card automatically.
Chapter 3: Taking Pictures
19
Taking More Advanced Pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Continuous Images
Note: If you set the timer mode to 10-Second
Timer or 3-Second Remote for the Continuous
image type, you can only take one picture.
Therefore, to capture a Continuous sequence of
timer mode set (that is, with the timer mode set
to its default Off setting).
Press the shutter release button and continue to hold the button down. Then the camera begins to
capture the images in the Continuous sequence.
Continuous images are captured until you release the shutter release button, or the memory card
becomes full, whichever comes first.
The camera will capture images as fast as it can. The capture rate (that is, the time between pictures)
will vary depending on the processing required (for such things as the resolution and image quality
settings) before each image is saved to the memory card (see the second Note on the left). The
capture rate also depends on whether or not the flash is being charged between shots. If you wish to
increase the capture rate of Continuous images, you can turn the live view of Capture mode off by
pressing the DISPLAY button on the back of the camera, turn Instant Review off through the
Display menu option in the Preferences menu of Capture mode (see “Display Submenu” on page
67), and set the flash mode to Forced Off (see “Setting the Flash Mode” on page 10).
Note: If Instant Review is on, each image in a
Continuous sequence except for the final one is
automatically saved to the memory card before
the camera captures the next image in the
sequence. If Instant Review is off, each image is
automatically saved before the next one is
captured, and then the final one is saved
automatically, as well.
If Instant Review is on (see “Using Instant Review” on page 25). at the end of taking a Continuous
sequence of images, the final image of the sequence is displayed in the Instant Review on the image
LCD. You can do any of the following during the Instant Review period:
Š
Š
Š
Record sound that will be attached to the final image of the sequence. For information on how
to do this, see “Recording Sound” on page 26.
Delete the final image of the sequence by pressing the middle (Delete) soft key. (All of the
other images in the sequence were already saved to the memory card.)
Also note that, unlike Timelapse images,
Continuous images are not grouped together
but are individual images. Thus, they are saved
as individual images on the memory card.
Save the final image of the sequence to the memory card and return to the Capture mode
immediately by pressing the right (Exit) soft key. (All of the other images in the sequence were
already saved to the memory card.)
Š
Do nothing and, when Instant Review times out (the default time-out is 3 seconds), the final
image of the sequence is then saved to the memory card automatically.
Note: If you are unhappy with any other
images within a Continuous sequence (rather
than just the final image, which you can only
delete during Instant Review), you can delete
those images in the Review mode. To do this,
see “Deleting Images” on page 32.
Chapter 3: Taking Pictures
20
Taking More Advanced Pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Timelapse Images
Note: The 10-Second Timer mode is disabled
If you are using the:
for the Timelapse image type.
Š
Š
Shutter release button with no timer mode set, press and release the shutter release button
one time. Then the camera captures the first image of the Timelapse sequence.
3-Second Remote
timer mode, point the HP Remote Control at the camera, and press
and release the Remote Control’s trigger button one time. The timer LED on the front of the
camera (see page 24) blinks faster for 3 seconds. Then the camera captures the first image of the
Timelapse sequence.
Note: If the interval you set for Timelapse
image capture is long, the camera may go into
between taking pictures to conserve
battery power.
The settings in the Timelapse menu option of the Capture Settings menu determine the number of
pictures that are taken and the interval between pictures in the Timelapse sequence of images that
are captured. (To change the Timelapse settings, see “Timelapse Settings Submenu” on page 54.)
The image LCD displays the previously captured image while counting down to the next image
capture. The only option you have is to stop the Timelapse sequence by pressing the right (Stop)
soft key.
Also, if you set the Timelapse interval to 15 or
30 sec and you have the File Type set to TIFF,
the camera may skip capturing an image if it is
not finished processing the previous image in
the Timelapse sequence.
If Instant Review is on (see “Using Instant Review” on page 25). at the end of taking a Timelapse
sequence of images, the first image in the sequence is displayed in the Instant Review on the image
LCD. You can do any of the following during the Instant Review period:
Note: If you are unhappy with one or more
images within a Timelapse sequence, you can
delete only those images in the Review mode
(rather than deleting all of the images in the
sequence during Instant Review). To do this, see
“Deleting Images” on page 32.
Š
Record sound that will be attached to the first image of the sequence. For information on how to
do this, see “Recording Sound” on page 26.
Š
Š
Delete all of the images in the sequence by pressing the middle (Delete) soft key.
Save all of the images in the sequence to the memory card and return to the Capture mode
immediately by pressing the right (Exit) soft key.
Note: All images in a Timelapse sequence are
saved as one group on the memory card.
Š
Do nothing and, when Instant Review times out (the default time-out is 3 seconds), all of the
images in the sequence are then saved to the memory card automatically.
What’s Next?
The following sections provide more information about various features of your camera that you
can use when taking pictures (such as the zoom), or that provide you with important feedback on the
status of your camera while you are taking pictures (such as the LEDs). Once you have read through
the following sections, continue on to Chapter 4 to learn how to view and review the images you
have captured via the camera’s Playback and Review modes.
Chapter 3: Taking Pictures
21
Taking More Advanced Pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Zoom Lever
While you are framing the subject for a picture, you will likely find that you need to zoom in or out
on the subject. This section explains the camera’s zoom lever, which you can use for this purpose.
Figure 8: Zoom Lever
Rocking the zoom lever (see Figure 8) left and right moves the lens continuously between wide
angle
and telephoto focal lengths for optical zooming.
The zoom lever also controls digital zooming. Digital zooming refers to digital cropping of the
image, giving the appearance of greater zoom. After the optical zoom is at its maximum setting, you
can digitally zoom in three steps (see below). Note, however, that you must have the image LCD on
the camera.)
If the image LCD is turned on and the camera’s zoom is at the end of the telephoto range, releasing
and pressing the zoom lever will initiate digital zooming. A digital zoom icon
will appear in the
text message area of the image LCD’s top overlay bar. Digital zooming occurs in three steps:
Note: In digital zoom mode, enlargement is
accomplished without changes in the lens
configuration. Since the lens is not involved
in digital zoom, the changes appear only in
the image LCD; they are not evident through
the viewfinder.
Š
Š
Š
1.2x
1.5x
2x
The camera pauses for 250 milliseconds (1/4 second) between steps. Digital zoom remains set shot-
to-shot, but turns off when you cycle the power on the camera. It also turns off any time you exit the
live view of Capture mode (for example, you press the MENU button on the camera to display the
Capture mode menus, or you turn the camera mode dial to set the camera to another mode).
To exit the digital zoom, you can also press, release, and then re-press the zoom lever in the wide
angle direction.
Figure 9: Diopter Control
Using the Diopter Control
The diopter control (see Figure 9) is the small dial on the left side of the viewfinder that you can turn
to adjust the focus of the picture subject in the viewfinder. Note that the diopter control has no effect
on the image you capture, however.
Note: The diopter control does not affect the
captured image itself.
Chapter 3: Taking Pictures
22
Using the Zoom Lever
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the LEDs on the Camera
Your camera has several LEDs (Light Emitting Diodes) that light solid or blink to indicate that certain
actions are occurring within the camera, or particular problems may have occurred while you were
performing a particular task with the camera. This section describes what these LEDs are and how
they behave.
Viewfinder LEDs
The LEDs on the right side of the viewfinder (see Figure 10) display either a green light, red light, or
both, indicating either the focus status, flash status, a memory card problem, or that the camera is
processing an image and is not ready to take a picture.
Figure 10: Viewfinder LEDs
Table 6: Viewfinder LEDs
Green
Red
LED
Function
Behavior
Green (Top)
Indicates focus status
Lights solid when the shutter release button
is pressed halfway down to indicate that the
picture is ready to take.
Blinks when the camera cannot focus on the
picture subject.
Red (Bottom)
Indicates flash status
Lights solid when the shutter release button
is pressed halfway down to indicate that the
flash is charged and ready to fire.
Blinks when the shutter release button is
pressed halfway down to indicate that the
flash is charging.
Both
Indicate a memory
card problem, or
that the camera is
processing an image
and is not ready to
take a picture
In the event of a full or missing memory card,
both LEDs blink when you press the shutter
release button halfway down. In this case,
000 will also blink on the status LCD.
In the event of a bad or unformatted memory
card, or when the camera is processing an
image and is not ready to take a picture,
both LEDs blink when you press the shutter
release button halfway down.
Chapter 3: Taking Pictures
23
Understanding the LEDs on the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer LED
Figure 11: Timer LED
The red timer LED on the front of the camera (see Figure 11) lights solid and/or blinks depending on
the timer mode you set (see “Setting the Timer Mode” on page 11). If you set the timer mode to the:
Š
10-Second Timer setting, when you press and release the shutter release button, the timer LED
lights solid for 7 seconds. It then blinks for the final 3 seconds before the camera captures
the image.
Š
3-Second Remote setting, the timer LED blinks slowly while waiting for you to press the
Remote Control’s trigger button. Once you press the trigger button, the timer LED blinks faster
for 3 seconds before the camera captures the image.
Memory Card Access LED
Figure 12: Memory Card Access LED
The amber memory card access LED on the back of the camera (see Figure 12) blinks whenever the
camera is reading from or writing to the memory card.
Caution: Make sure the camera is powered off
any time you remove the memory card from
the camera. Removing the memory card when
the memory card access LED is blinking could
corrupt the images and other files on the
memory card.
Chapter 3: Taking Pictures
24
Understanding the LEDs on the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Instant Review
The Instant Review feature allows you to see displayed on the image LCD either the One Shot image,
the final image of a Continuous image sequence, or the first image of a Timelapse sequence you just
captured. The default setting is that Instant Review is on for 3 seconds after the One Shot image or
the final image in a Continuous or Timelapse sequence is captured.
You can change the duration that the image is displayed in Instant Review or turn Instant
Review off through the Display menu option in the Preferences menu of Capture mode. (See
“Display Submenu” on page 67 and “Setting the Display” on page 95.)
Note: When Instant Review is set to Off, the
camera immediately returns to Capture mode,
and the captured image or sequence of images
is automatically saved to the memory card.
While an image is displayed in Instant Review on the image LCD, you can do any of the following:
Š
Record sound that will be attached either to the One Shot image, to the final image of a
Continuous sequence, or to the first image of a Timelapse sequence (see the next section,
“Recording Sound”).
Š
Delete the captured image(s) by pressing the middle (Delete) soft key. Either the One Shot
image, the final image of a Continuous sequence, or all of the images in a Timelapse sequence
will be deleted.
Note: If you are unhappy with any other
images within a Continuous sequence (rather
than just the final image, which you can only
delete during Instant Review), you can delete
those images in the Review mode. To do this,
see “Deleting Images” on page 32.
When you press the Delete soft key, you will be prompted Delete? in the top overlay bar. You
can press either the left (Delete) soft key to delete the image(s), or the right (Cancel) soft key to
cancel the delete operation. If you recorded sound, then the option of deleting Sound Only is
also provided for the middle soft key.
Š
Š
Save the image(s) to the memory card and return to the Capture mode immediately by pressing
the right (Exit) soft key. Either the One Shot image, the final image of a Continuous sequence, or
all of the images in a Timelapse sequence will be saved.
Similarly, if you are unhappy with one or more
images within a Timelapse sequence, you can
delete only those images in the Review mode
(rather than deleting all of the images in the
sequence during Instant Review). To do this, see
“Deleting Images” on page 32.
Do nothing and, when Instant Review times out (the default time-out is 3 seconds), the image(s)
are then saved to the memory card automatically. Either the One Shot image, the final image of
a Continuous sequence, or all of the images in a Timelapse sequence will be saved.
Chapter 3: Taking Pictures
25
Using Instant Review
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Sound
Note: You can record up to 45 seconds of
sound per image or sequence of images.
You can record sound to attach to your images when your camera is in Capture mode and has
Instant Review set on (see the previous section). During the Instant Review period, the camera records
the sound and then attaches it to either the One Shot image, to the final image of a Continuous
sequence, or to the first image of a Timelapse sequence that you just captured. The sound recording
capability remains active during the entire Instant Review period.
Note: The microphone is located on the front of
the camera. So if you are recording your own
voice, you may get better sound quality by
rotating the camera around to face you.
You can also record sound in the Playback or Review modes to attach to images. (See the second
Note on the left for more information.)
Once you have captured an image or sequence of images in Capture mode and the Instant Review is
displayed on the image LCD, do the following to record sound that will be attached to the image:
Figure 13: Screen During Sound Recording
1 Press the sound record button
on the back of the camera to activate the recording. A
microphone icon flashes and the length of the recording in minutes and seconds (00:00)
appears in the top overlay bar of the image LCD (see Figure 13).
2 Record your sound (up to 45 seconds).
3 Press the sound record button again to stop the recording. The screen displays Ready in the top
overlay bar, and three soft key labels in the bottom overlay bar: Play, Delete, and Exit (from left
to right).
4 Do any of the following:
Š
Š
Press the left (Play) soft key to play back the sound recorded.
Note: You can also record sound to attach to a
One Shot image, any of the images in a
Continuous sequence, or to the first image in a
Timelapse sequence of images after the Instant
Review period has finished. To do so, you must
Press the middle (Delete) soft key to delete either the image(s) and the sound, or to delete
the sound only.
Š
Š
Press the right (Exit) soft key to immediately save the image(s) and the attached sound to
the memory card.
set the camera to either Playback
or Review
mode. Then select an image or sequence
of images in the Playback or Review mode and
follow steps 1-4 (to the right on this page) to
record sound that will be attached to the
selected image or sequence of images.
Do nothing and allow the Instant Review to time out. In this case, the image(s) and the
attached sound are automatically saved to the memory card.
Chapter 3: Taking Pictures
26
Recording Sound
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Viewing and Reviewing Images
Overview
This chapter explains how to view captured images via the Playback mode and how to review the
images via the Review mode.
Š
“Using Playback Mode” on page 27
Š
Š
Š
Š
Š
Š
Š
“Accessing the Playback Mode” on page 27
“Viewing Images Full Screen” on page 28
“Understanding the Overlay Bars” on page 28
“Turning the Overlay Bars Off and On” on page 28
“Zooming in on Images” on page 28
“Playing Back Timelapse and Grouped Images” on page 28
“Creating and Playing a Slideshow” on page 29
Š
“Using Review Mode” on page 30
Š
Š
Š
Š
Š
Š
Š
Š
Š
“Accessing the Review Mode” on page 30
“Selecting Images” on page 30
“Marking and Unmarking Images” on page 31
“Expanding and Collapsing Timelapse or Grouped Images” on page 31
“Deleting Images” on page 32
“Grouping Images and Dissolving Image Groups” on page 33
“Categorizing Images and Deselecting Image Categories” on page 35
“Searching for Images by Date and by Category” on page 36
Using Playback Mode
Accessing the Playback Mode
Note: You cannot delete images while in
Playback mode. You can delete images in
Review mode, however. (See “Deleting Images”
on page 32.)
To access the Playback mode:
1 Set the camera mode dial to Playback mode
.
2 Power on the camera if you haven’t already. The Playback mode screen is displayed on the
image LCD.
Chapter 4: Viewing and Reviewing Images
27
Using Playback Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Images Full Screen
When you first enter Playback mode, the image LCD displays the last image saved on the memory
card. The image appears full screen. To view a full screen image of the other captured images on the
memory card, press the right or left arrow on the 4-way controller to scroll through the images.
Understanding the Overlay Bars
The Playback mode displays two overlay bars. The top overlay bar contains information about the
image (including the image number, the date and time the image was captured, as well as some of
the key camera settings that were used to capture the image, such as the image type and exposure
mode). The bottom overlay bar contains the soft key labels.
Turning the Overlay Bars Off and On
By default, both the top and bottom overlay bars are displayed in Playback mode. However, you
can turn one or both overlay bars off so you can see more of each image on the image LCD. Simply
press the DISPLAY button on the back of the camera once to turn both overlay bars off, a second
time to turn the bottom one on only, and a third time to turn both on again.
Zooming in on Images
If you want to see a portion of an image in more detail, press the middle (Zoom) soft key. When you
are zoomed in, you can use the 4-way controller to see different parts of the image. You must then
Playing Back Timelapse and Grouped Images
Note: You can change the playback rate in the
Playback Rate submenu of the Play Settings
menu. For more information, see “Playback
Rate Submenu” on page 76.
You can play back sequences of Timelapse and grouped images at a pre-defined rate, much like
a slideshow.
To play back image sequences:
2 Press the left (Play) soft key. The images, including any sound you have attached to them, will
play back on the image LCD.
3 Press the left (Stop) soft key to stop playing back your images.
Chapter 4: Viewing and Reviewing Images
28
Using Playback Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating and Playing a Slideshow
You can create a slideshow to display your images on the image LCD or on a television screen. Your
slideshow can include all of the images on the memory card, or you can choose a single category of
images to use.
For more information on:
Š
Š
Categories, see “Categorizing Images and Deselecting Image Categories” on page 35.
Connecting your camera to a television so that you can view a slideshow on the television, see
“Connecting the Camera to Your Television” on page 50.
To create and play a slideshow:
1 Press the MENU button on the back of the camera. The Slideshow option of the Play Settings
menu is highlighted.
2 Press the left (Edit) soft key to go to the Slideshow submenu.
3 Change any of the settings in the Slideshow submenu, as desired. For more information about
these settings, see “Slideshow Submenu” on page 75.
4 Press the left (Start) soft key to begin the slide show.
5 You can stop the slideshow at any time by pressing the left (Stop) soft key.
6 After you have stopped the slideshow or it has ended, press the right (Exit) soft key to save the
settings and exit the Slideshow menu.
Chapter 4: Viewing and Reviewing Images
29
Using Playback Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Review Mode
Accessing the Review Mode
To access the Review mode:
Figure 14: Image LCD Screen in Review Mode
1 Set the camera mode dial to Review mode
.
Selection
marker
2 Power on the camera if you haven’t already.
Thumbnails
The Review mode screen is displayed on the image LCD (see Figure 14). The image LCD displays the
images that are saved on the memory card. The images appear as small thumbnails along the top of
the screen.
Image
information
Selected
image
The small thumbnail that has the selection marker under it is the selected image. The selected image
is also displayed as the large thumbnail on the bottom left of the screen. Information about the
selected image (including the image number and the date and time the image was captured)
appears on the bottom right of the screen. If the selected image is a part of a group, the group
name is also displayed. If the image was transmitted to this camera from another camera, and the
other camera had a camera name assigned, then the camera name is displayed (instead of any
group name).
Soft key labels
The icon bar above the image information area shows whether the selected image is a single image,
a collapsed Timelapse sequence of images, or a collapsed group of images. The icon bar also shows
a sound icon if sound is attached to the selected image, as well as a category icon if a category has
been assigned to the selected image.
Selecting Images
The selection marker beneath the small thumbnail row indicates which image is selected and is
displayed as the large thumbnail, along with its image information, at the bottom of the screen.
To select an image, press the right or left arrow on the 4-way controller to scroll through the
thumbnails until the selection marker is under the image that you want to select. The selected image
is now displayed as the large thumbnail, along with its image information, at the bottom of the
screen.
Chapter 4: Viewing and Reviewing Images
30
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Marking and Unmarking Images
You can mark several images so that, when you select an action from the Review mode menus, that
action will apply to all the marked images. For example, you can mark several images and delete
them all at once, instead of having to delete one image at a time.
Figure 15: A Marked Image
To mark or unmark all of the images on the memory card, press and hold the left (Mark or Unmark)
soft key for 3 seconds, and then release it.
To mark one or more (but not all) images:
1 Press the right or left arrow on the 4-way controller to scroll through the thumbnails until the
selection arrow is under an image you want to mark.
A notch
indicates
a marked
image
2 Press the left (Mark) soft key. A notch appears in the lower right corner of the selected thumbnail
image (see Figure 15).
3 Repeat steps 1 and 2 to mark additional images.
To unmark an image, scroll to the marked image, and then press the left (Unmark) soft key.
Expanding and Collapsing Timelapse or Grouped Images
When you take Timelapse pictures, the camera takes a sequence of pictures and automatically
groups the captured images, using the first captured image to represent the sequence. You can also
group individual images using the Group menu option of the Review mode menus (see “Grouping
Images and Dissolving Image Groups” on page 33). This section explains how to expand Timelapse
or grouped images into the individual images, and how to collapse them again.
Figure 16: An Expanded Group
To expand Timelapse or grouped images:
1 Select the image that represents the Timelapse or grouped image sequence that you want
to expand.
2 Press the right (Expand) soft key. Thumbnails of all the images in the sequence are displayed
with links between them (see Figure 16).
To collapse Timelapse or grouped images:
1 Select any image in the Timelapse sequence or group you want to collapse.
2 Press the right (Collapse) soft key.
Chapter 4: Viewing and Reviewing Images
31
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Images
You can delete a single image that is currently selected (whether it is a One Shot or Continuous
image, an individual image within an expanded Timelapse sequence, or an individual image within
an expanded group of images), all marked images, a collapsed Timelapse sequence of images, or a
collapsed group of images from the memory card.
To delete images:
1 Select the image or mark the images you want to delete.
Note: To mark or unmark all of the images on
the memory card, press and hold the left (Mark
or Unmark) soft key for 3 seconds, and then
release it.
If you want to delete one or more images (but not all the images) within a Timelapse sequence
or a group of images, first follow the instructions in “Expanding and Collapsing Timelapse or
Grouped Images” on page 31 to expand the Timelapse sequence or group of images. Then
select the image or mark the images you want to delete from the expanded Timelapse sequence
or group of images.
“Protecting and Unprotecting Images” on
page 34.
2 If you want to:
Š
Delete only the currently selected single image, collapsed Timelapse sequence of images,
or collapsed group of images, press the middle (Delete) soft key in the Review mode screen.
Š
Delete all of the marked images, press the MENU button on the back of the camera. The
Edit menu of Review mode is displayed, with the Delete menu option highlighted. Press the
middle (Delete) soft key.
3 Press the left (Delete) soft key again to delete the image(s).
Chapter 4: Viewing and Reviewing Images
32
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Grouping Images and Dissolving Image Groups
Note: A group becomes a folder on the
memory card, in which all the images in that
group are stored.
You can group images to organize them in one folder on the memory card. To group images:
1 Mark the images you wish to group.
2 Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
3 Press the down arrow on the 4-way controller to scroll to the Group menu option.
4 Move to the Group Name menu by pressing either the left (Create) soft key if there are no
existing groups, or the left (Add) soft key and then the middle (Create New) soft key if there are
existing groups.
Note: Group names must be eight characters or
less, and cannot contain spaces. Also, the
camera does not accept group names that
begin with BR or TL (regardless of language)
because these letters are reserved.
5 Name the new group by doing the following. (See the Note on the left for restrictions on
group names.)
Š
Š
Press the up or down arrow on the 4-way controller to scroll to the letter you want to use.
Press the right arrow on the 4-way controller to add a letter to the name, or the left arrow to
delete a letter. For example, if you select the letter “L” and then press the right arrow on the
4-way controller, the letter appears in the center of the screen.
Figure 17: Two Images in a Group
6 Press the right (Exit) soft key to exit the Group Name menu, and then press Exit again to exit the
Review mode menus. You are returned to the Review mode screen. The name of the group now
appears in the image information for all the images in the group when each image is selected,
and the images in the group have a link icon between them (see the example in Figure 17).
To dissolve (remove) the grouping on images:
1 Select any image included in the group you want to dissolve.
2 Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
3 Press the down arrow on the 4-way controller to scroll to the Group menu option.
4 Press the center (Dissolve) soft key to dissolve (remove) the grouping.
Note: Dissolving a group does not delete the
5 Press the right (Exit) soft key. You are returned to the Review mode screen, and the images are no
images in the group, only the group name.
longer grouped.
Chapter 4: Viewing and Reviewing Images
33
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting and Unprotecting Images
You can protect images so that they won’t be deleted accidentally. (When an image is protected, it
cannot be deleted from the memory card.)
To protect images:
Figure 18: A Protected Image
1 Select an image or mark the images you want to protect.
2 Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
3 Press the down arrow on the 4-way controller to scroll to the Protect menu option.
4 Press the center (Protect) soft key. You are returned to the Review mode screen, and a Protect
icon appears in the image information for the protected image(s) (see Figure 18).
Protect
icon
To remove protection from (unprotect) images:
1 Select an image or mark the images you want to unprotect.
2 Press the MENU button.
3 Press the down arrow on the 4-way controller to scroll to the Protect menu option.
4 Press the left (Unprotect) soft key. You are returned to the Review mode screen, and there is no
longer a Protect icon in the image information for the image(s).
Chapter 4: Viewing and Reviewing Images
34
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Categorizing Images and Deselecting Image Categories
You can assign a category to your images to make them easier to find and organize. You can also
play a slideshow of a category of images very easily.
You can either categorize one image at a time, or mark a number of them and apply one category to
all of the marked images.
To categorize one or more images:
1 Select or mark the image(s) you wish to categorize.
2 Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
Figure 19: A Categorized Image
Category
3 Press the down arrow on the 4-way controller to scroll to the Categorize menu option.
4 Press the left (Edit) soft key to move to the Categories submenu.
icon
5 Press the down arrow on the 4-way controller to scroll to the category you want to assign to the
image(s).
6 Press the left (Select) soft key. A checkmark appears next to that category, and you are returned
to the Review mode screen. An icon representing the category you assigned to the image(s) now
appears in the image information for the selected image(s) (see Figure 19).
To deselect an image’s category:
1 Select the image whose category you want to deselect.
2 Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
3 Press the down arrow on the 4-way controller to scroll to the Categorize menu option.
4 Press the left (Edit) soft key to move to the Categories submenu.
5 Press the down arrow on the 4-way controller to scroll to the category you want to deselect.
6 Press the left (Deselect) soft key. You are returned to the Review mode screen, and the category
icon is no longer in the image information for the selected image.
Chapter 4: Viewing and Reviewing Images
35
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for Images by Date and by Category
Figure 20: Find By Date
You can use the Find menu in Review mode to search for images by date or by category. For more
information on categories, see “Categorizing Images and Deselecting Image Categories” on
page 35.
To search for images by date:
1 Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
2 Press the right arrow on the 4-way controller to scroll to the Find menu.
3 Press the left (Edit) soft key.
Figure 21: Results of a Find by Date Operation
4 Enter the range of dates you want the camera to use to search for images (see Figure 20).:
Š
Š
Press the right arrow of the 4-way controller to scroll to the month, day, and year fields.
Press the up and down arrows to change the month, day, and year.
5 Press the left (Find) soft key. The results of your search appear on the image LCD (see Figure 21).
Notice the Find icon at the bottom right of the screen, which indicates that the displayed images
are the result of a Find operation.
Find
icon
6 Press the arrows on the 4-way controller to scroll through the images. When you are done, press
the center (Show All) soft key to resume viewing all the images stored on the memory card.
Note: If there are no images within the range of
dates that you specified, the image LCD
displays the message: “No images matched
search criteria.” In this case, you can either press
the middle (Show All) soft key to resume
viewing all images stored on the memory card,
or press the left (Find) soft key to select a new
range of dates.
Chapter 4: Viewing and Reviewing Images
36
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
To search for images by category:
1 Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
2 Press the right arrow on the 4-way controller to scroll to the Find menu.
3 Press the down arrow on the 4-way controller to scroll to By Category.
4 Press the left (Edit) soft key.
5 Press the down arrow on the 4-way controller to scroll to the category you want to view.
6 Press the left (Select) soft key. The results of your search appear on the image LCD. Notice the
Find icon at the bottom right of the screen, which indicates that the displayed images are the
result of a Find operation.
7 Press the arrows on the 4-way controller to scroll through the images. When you are done, press
the center (Show All) soft key to resume viewing all the images stored on the memory card.
Chapter 4: Viewing and Reviewing Images
37
Using Review Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Sharing Images
Overview
You can use the images you capture with your camera in many fun and creative ways. You can
transfer them to your computer for use in creative projects, or for sharing with family and friends via
the Internet. If you have a printer that supports the HP JetSend infrared technology, you can use
JetSend for wireless printing of your images. You can even connect the camera to your television to
view a slideshow of your images on the television.
This chapter covers the following topics:
Š
Š
Š
Š
Š
“Transferring Images to Your Computer” on page 38
“Using a Digital Print Order Format (DPOF) File” on page 44
“JetSending Images to a Printer” on page 46
“Transmitting Images Between Two Cameras” on page 48
“Connecting the Camera to Your Television” on page 50
Transferring Images to Your Computer
Caution: Be aware that any sound (namely,
sound tags and other EXIF tags) you have
captured and attached to images with your
camera may not be supported and may be lost
if you use image editing software other than the
HP Photo Imaging Software with the images on
your computer.
You can transfer images to your computer when the camera is set to PC Connect mode. The
PC Connect Mode submenu of the Preferences menu lets you specify how the camera will appear to
your computer when connected via the USB interface. You can set the camera to one of the following
settings in the PC Connect Mode submenu depending on the operating system that is running on
your computer:
PC Connect Mode
How Images are Transferred
Operating Systems
TM
You can use software included with your computer
or camera to transfer images to the computer.
Windows® Me, 98,
and 2000
Digita Device
(default)
USB Disk Drive
The camera is operated as a USB Mass Storage
Device and appears as a disk drive connected to
your computer. So you can copy images from
your camera to the computer as you would from
another disk drive.
Mac® OS 8.6
or better,
and
Windows Me, 98,
and 2000
Chapter 5: Sharing Images
38
Transferring Images to Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
The one exception is Windows NT 4.0, because it does not support the USB interface. A Windows
NT 4.0 computer must have either an HP P1000/1100 or similar printer, or a memory card reader
connected to its serial or parallel interface. You can then transfer images from the camera’s memory
card to the computer via either the memory card slot in the HP printer, or the memory card reader.
The following three subsections explain how to transfer images to a computer depending on the PC
Connect Mode setting on the camera and/or the operating system that is running on the computer:
Š
Š
To use the Digita Device setting to transfer images from your camera to a Windows Me, 98, or
2000 computer, see the first subsection below.
computer running Mac OS 8.6 or better, or a Windows Me, 98, or 2000 computer, see the
subsection on page 41.
Š
To transfer images from the memory card to a Windows NT 4.0 computer, see the subsection on
page 43.
computer, it is assumed in this subsection that
you have already followed the HP 618 Digital
Camera Quick Start Guide to install the
Transferring Images Using the Digita Device Setting
If your computer is running Windows Me, 98, or 2000, you can transfer images from your camera to
the computer by using the default Digita Device setting in the PC Connect Mode submenu. If your
camera is running:
HP Photo Imaging Software on your computer.
Š
Windows Me, you can then use the Microsoft® Scanner and Camera Wizard that is included on
your Windows Me system to transfer the images from the camera to your computer.
Figure 22: Connectors on the USB Cable
Š
Windows 98 or 2000, you can then use the HP Photo Imaging Software that came with your
2000
camera to transfer the images from the camera to your computer.
To transfer images to your Windows Me, 98, or 2000 computer, do the following:
1 Power off the camera if it is still on.
2 Power on the computer if you haven’t already.
3 Connect the rectangular end of the USB cable to the USB port on the front or back exterior of
your computer (see Figure 22).
To Computer
To Camera
Chapter 5: Sharing Images
39
Transferring Images to Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 23: Connecting the USB Cable to the Camera
4 Open the door to the camera’s connector compartment and connect the square end of the USB
cable to the bottom (USB) connector (see Figure 23).
5 Set the camera to PC Connect mode
.
6 Power on the camera. Within a few seconds, your computer detects the camera on the USB port.
What happens next depends on what version of Windows your computer is running:
Windows Me
Your computer runs the Microsoft Scanner and Camera
Wizard. Follow the prompts in the Wizard to copy the
images to your computer.
Windows 98
or 2000
The main window of the HP Photo Imaging Software
opens. Do the following:
1. Click Unload Camera in the main window.
2. Click the Start button in the Unload Images window.
The images are copied to your computer.
Chapter 5: Sharing Images
40
Transferring Images to Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Images Using the USB Disk Drive Setting
If your computer is running either Macintosh OS 8.6 or better, or Windows Me, 98, or 2000, you
can transfer images from your camera to the computer by using the USB Disk Drive setting in the
PC Connect Mode submenu. In so doing, the camera will operate as a USB Mass Storage Device and
appear as a disk drive connected to your computer. You can then copy images from your camera to
the computer as you would from another disk drive. The following two subsections explain how.
Setting the USB Disk Drive Mode on the Camera
Note: If you have a Macintosh computer and
have already followed the instructions in
the HP 618 Digital Camera Quick Start Guide to
set the USB Disk Drive mode on your
camera, skip these instructions and go on
to “Using Your Camera as a USB Mass Storage
Device to Transfer Images” on page 42.
You must first set your camera to USB Disk Drive mode as follows:
1 Set the camera mode dial to Capture mode
2 Power on the camera if you haven’t already.
.
3 Press the MENU button on the back of the camera. The Capture mode menus are displayed on
the image LCD.
4 Press the right arrow on the 4-way controller three times to move to the Preferences menu.
5 Press the down arrow on the 4-way controller three times to move to the PC Connect Mode
menu option.
6 Press the left (Edit) soft key. The PC Connect Mode submenu is displayed, and the USB Disk
Drive option is highlighted.
7 Press the left (Select) soft key. The checkmark moves to the USB Disk Drive option, and
you return to the Preferences menu of Capture mode. The camera is now set to USB Disk
Drive mode.
8 Press the right (Exit) soft key to exit the menu.
9 Power off the camera by using the camera’s power switch.
The USB Disk Drive mode will remain set on your camera only if you power off the camera by
using the power switch. By powering off the camera correctly, you will not have to repeat the
previous procedures when transferring images to your computer via the USB Disk Drive mode in
the future.
Chapter 5: Sharing Images
41
Transferring Images to Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Camera as a USB Mass Storage Device to Transfer Images
Note: Software for Macintosh computers was
included with your camera. If you wish, you can
use this software to transfer images to your
software also provides tools for editing images
and using them in creative projects.
Once your camera is set to USB Disk Drive mode, you can transfer images to either your Macintosh
OS 8.6 or better computer, or your Windows Me, 98, or 2000 computer, by doing the following:
1 Power on the computer if you haven’t already.
2 Connect the rectangular end of the USB cable to the USB port on either your Macintosh
computer’s keyboard, or to the front or back exterior of your Windows computer (see Figure 24).
Figure 24: Connectors on the USB Cable
3 Open the door to the camera’s connector compartment and connect the square end of the USB
cable to the bottom (USB) connector (see Figure 25).
4 Set the camera mode dial to PC Connect mode
5 Power on the camera. If you have a:
.
Š
Macintosh computer, an icon labeled “Untitled” appears on your computer’s desktop. The
camera is now viewed by your Macintosh as a new disk drive.
Š
A Windows computer, the camera appears as a removable disk drive connected to your
computer under the My Computer folder in Windows Explorer.
If you have a Windows 98 or 2000 computer and have installed the HP Photo Imaging
Software on your computer (by following the instructions in the HP 618 Digital Camera
Quick Start Guide), then the main window of the HP Photo Imaging Software also opens. You
can either follow step 6 below to copy the image files from the camera to the computer in
Windows Explorer, or you can use the HP Photo Imaging Software to transfer the images.
To Macintosh Keyboard
To Camera
or Windows Computer
Figure 25: Connecting the USB Cable to the Camera
6 Copy the image files from the disk drive (the camera) to the hard drive of your computer as you
would from a floppy disk.
Chapter 5: Sharing Images
42
Transferring Images to Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Images from a Memory Card to a Windows NT 4.0 Computer
Note: It is assumed in this subsection that
you have already followed the HP 618 Digital
Camera Quick Start Guide to install the
To transfer images to your Windows NT 4.0 computer, you must have either an HP printer (such as
the HP P1000/1100) that has a slot for reading a memory card, or a memory card reader connected
to the computer’s serial or parallel interface. (This is because Windows NT 4.0 does not support the
USB interface.) You can then transfer images from the camera’s memory card to your computer via
either the HP printer’s memory card slot, or the memory card reader.
HP Photo Imaging Software on your computer.
If you are using an HP printer that has a memory card slot, refer to the printer’s documentation
to transfer images from the memory card to your Windows NT 4.0 computer via the printer’s
memory card slot.
If you are using a memory card reader, transfer images from the memory card to your Windows
NT 4.0 computer as follows:
1 Power off the camera if it is still on.
2 Remove the memory card from the camera. To do this, open the memory card door and press
the memory card release button to eject the card. Grasp the card by its side edges and pull it out
of the slot.
3 Insert the memory card into the memory card slot in the memory card reader.
4 Power on the computer if you haven’t already.
5 Double-click the HP Photo Imaging Software icon on the Windows desktop. The main window of
the HP Photo Imaging Software opens.
6 Click Unload Camera in the main window. Because no USB camera is found, the software
displays a dialog box in which you can select the drive letter for your memory card reader.
7 Select the drive letter (such as H:) for your memory card reader in the dialog box.
8 Click the Start button in the Unload Images window. The images are copied to your computer.
Chapter 5: Sharing Images
43
Transferring Images to Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Digital Print Order Format (DPOF) File
A DPOF file is a file you create using your camera that allows you to pre-select which images you
want to print. The file is stored on the memory card and contains information about which images
are selected, how many of each image is to be printed, and at what size to print each of them. The file
is used by selected HP printers and other printing devices that can read a DPOF file directly from the
memory card.
Note: If you delete an image that is referenced
in a DPOF file on the memory card, you must
erase and then re-create the DPOF file before
you can print images via the DPOF file.
Creating a DPOF File
To create a DPOF file:
1 Set the camera mode dial to Review mode
2 Power on the camera if you haven’t already.
.
3 Either select one image or mark multiple images in the Review mode screen that you want to
include in the DPOF file. (See “Selecting Images” on page 30 and “Marking and Unmarking
Images” on page 31 for more information.)
4 Press the MENU button on the back of the camera. The Review mode menus are displayed.
5 Press the right arrow on the 4-way controller once to move to the Print Order Form menu.
Note: For more information on the Print Order
6 Press the left (Add) soft key to select the highlighted Add Images menu option. The Add to
Form menu, see page 81.
Order submenu is displayed.
7 Use the arrows on the 4-way controller to specify the number of Copies you want of the
selected or marked images, as well as the Size you want them printed. The Size settings include:
Š
Standard (default) − One of the standard print sizes. You specify the exact size you want
your Standard prints to be at the printer. For example, you can specify that all Standard
images be printed at 4” x 6”.
Š
Index − Thumbnails of the images.
8 Press the left (Add) soft key to save the settings and return to the Print Order Form menu.
Chapter 5: Sharing Images
44
Using a Digital Print Order Format (DPOF) File
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a DPOF File
To view a DPOF file, do the following while in the Print Order Form menu:
1 Press the down arrow on the 4-way controller to highlight the View Order menu option.
2 Press the left (Select) soft key. The Print Order Form screen is displayed, which lists the contents
of the DPOF file. You can scroll through this list using the up and down arrows on the 4-way
controller. However, you cannot edit this list.
Erasing a DPOF File
To erase a DPOF file, do the following while in the Print Order Form menu:
1 Press the down arrow on the 4-way controller to highlight the Erase Order menu option.
2 Press the left (Erase) soft key. You will see a confirmation of your choice to erase all entries from
the Print Order Form.
3 Press the middle (Erase) soft key to erase all of the entries from the Print Order Form.
Chapter 5: Sharing Images
45
Using a Digital Print Order Format (DPOF) File
Download from Www.Somanuals.com. All Manuals Search And Download.
JetSending Images to a Printer
HP JetSend allows for easy, wireless printing. If your printer supports the HP JetSend infrared
technology, you can transfer your images directly from the camera to the printer without connecting
any cables. See your printer’s documentation for more information.
Note: It will take an average of 20 seconds to
JetSend an image from the camera to a printer.
on the back of the camera to JetSend only the current image in the Capture, Playback, or Review
mode to a printer. Or you can use the Transmit menu in Review mode to JetSend the current image
or all marked images to a printer. Each of these methods is explained in the following subsections.
Using the Send Button to JetSend Only the Current Image
To JetSend only the current image to a JetSend-capable printer:
1 Set the camera mode dial to either Capture , Playback
2 Power on the camera if you haven’t already.
3 If you are in:
, or Review
mode.
Š
Capture mode, you will automatically be JetSending the last image you captured. You do
not need to do anything to select the image.
Š
Playback or Review mode, press the right or left arrow on the 4-way controller to scroll
through your images in the Playback or Review mode screen until the image you want to
transfer is displayed or selected.
4 Set your printer to receive images to print. See your printer’s documentation for details.
Figure 26: Infrared Window on the Camera
5 Aim the camera’s infrared window (see Figure 26) at the printer’s infrared sensor, and place the
camera about 10 inches away from the printer.
6 Press the Send button
on the back of the camera. The camera immediately starts a JetSend
session, searches for a compatible printer, and sends the current image to the printer. (If the
current image is actually a collapsed Timelapse sequence or group of images, only the first
image of the sequence or group is sent.)
During the transfer, the image LCD reads: “Sending 1 image...” and shows a progress bar.
You can cancel the transfer at any time by pressing the center (Stop) soft key on the camera.
A confirmation screen will display to show that the Send was successful.
7 Press the right (Done) soft key when you have finished transmitting images to the printer.
Chapter 5: Sharing Images
46
JetSending Images to a Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Transmit Menu to JetSend the Current or All Marked Images
To JetSend the current image or all marked images to a JetSend-capable printer:
1 Set the camera mode dial to Review mode
2 Power on the camera if you haven’t already.
.
3 Either select one image or mark multiple images in the Review mode screen that you want to
JetSend. (See “Selecting Images” on page 30 and “Marking and Unmarking Images” on page 31
for more information.)
4 Press the MENU button on the back of the camera. The Review mode menus are displayed.
5 Press the right arrow on the 4-way controller two times to move to the Transmit menu.
6 Press the down arrow on the 4-way controller to highlight the Camera-Printer menu option.
7 Set your printer to receive images to print. See your printer’s documentation for details.
8 Aim the camera’s infrared window (see Figure 26 on page 46) at the printer’s infrared sensor, and
place the camera about 10 inches away from the printer.
9 Press the left (Send) soft key on the camera. The camera immediately starts a JetSend session,
searches for a compatible printer, and sends the current or all marked images to the printer.
During the transfer, the image LCD reads: “Sending X image(s)...” and shows a progress bar.
You can cancel the transfer at any time by pressing the middle (Stop) soft key on the camera.
A confirmation screen will display to show that the Send was successful.
10Press the right (Done) soft key when you have finished transmitting images to the printer.
Chapter 5: Sharing Images
47
JetSending Images to a Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmitting Images Between Two Cameras
You can use the Camera-Camera option in the Transmit menu of Review mode to send images from
your camera to another camera, or to receive images from another camera. The other camera must
use the standard Digita transmit protocol. See the other camera’s documentation for details.
Sending Images to Another Camera
To send the current image or all marked images to another Digita camera:
1 Set the camera mode dial to Review mode
2 Power on the camera if you haven’t already.
.
3 Either select one image or mark multiple images in the Review mode screen that you want to
send to the other camera. (See “Selecting Images” on page 30 and “Marking and Unmarking
Images” on page 31 for more information.)
4 Press the MENU button on the back of the camera. The Review mode menus are displayed.
5 Press the right arrow on the 4-way controller two times to move to the Transmit menu. The
Camera-Camera menu option is highlighted.
6 Press the left (Send) soft key on your camera. Your camera’s image LCD reads: “Receiving
Camera Ready?”
7 Set the other camera to receive images. See the other camera’s documentation for details.
8 Aim your camera’s infrared window (see Figure 26 on page 46) at the other camera’s infrared
sensor, and set the cameras about 10 inches apart.
9 Press the left (Continue) soft key on your camera. Your camera immediately searches for
another compatible camera and begins to transmit images to the other camera.
During the transfer, the image LCD reads: “Sending X image(s)...” and shows a progress bar.
You can cancel the transfer at any time by pressing the middle (Stop) soft key on your camera.
A confirmation screen will display to show that the transfer was successful.
10Press the right (Done) soft key when you have finished transmitting images to the other camera.
Chapter 5: Sharing Images
48
Transmitting Images Between Two Cameras
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Images from Another Camera
To receive images from another Digita camera:
1 Set the camera mode dial to Review mode
2 Power on the camera if you haven’t already.
.
3 Press the MENU button on the back of the camera. The Review mode menus are displayed.
4 Press the right arrow on the 4-way controller two times to move to the Transmit menu. The
Camera-Camera menu option is highlighted.
5 Press the middle (Receive) soft key on your camera.
6 Set the other camera to send images. See the other camera’s documentation for details.
7 Aim your camera’s infrared window (see Figure 26 on page 46) at the other camera’s infrared
sensor, and set the cameras about 10 inches apart.
8 Send the images from the other camera. See the other camera’s documentation for details.
9 Press the right (Done) soft key when your camera has received all of the images.
Chapter 5: Sharing Images
49
Transmitting Images Between Two Cameras
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to Your Television
Note: Your camera comes with a 6 ft. audio/
video cable, which you can use to connect the
camera to a television.
When the camera is connected to a television, the television functions the same as the camera’s
image LCD. You can use your television to view a slideshow, making it easy to share your images
with family and friends.
Selecting the Camera’s Video Output Format
Before you connect the camera to the television, you need to select the camera’s video output
format. The format that you choose (NTSC or PAL) depends on your television’s video input format:
Š
Š
NTSC is the video connection standard used in the United States and Japan.
PAL is the video connection standard used in Europe.
Note: Refer to your television’s or VCR’s
documentation for more information about the
video input format.
To select the video output format for the camera:
1 Set the camera mode dial to Playback mode
2 Power on the camera if you haven’t already.
.
3 Press the MENU button on the back of the camera.
4 Press the down arrow on the 4-way controller to scroll to Video.
5 Press the left (Edit) soft key.
6 Press the right or left arrows on the 4-way controller to select NTSC or PAL in the Video
Preferences submenu.
Making the Connection
To connect the camera to the television:
1 Connect the video input end of the audio/video cable into your television:
Š
If you are using an NTSC connection, plug the video input (yellow) end of the audio/video
cable into your television’s video input connector (on most televisions, this is also yellow).
Note: See your television’s documentation for
specific instructions on how to locate the video
input connector, and how to set the video input.
Š
If you are using a PAL connection, plug the video input (yellow) end of the audio video
cable into your television’s video input connector. On older television sets, plug the video
cable into a SCART adapter (purchased separately), then plug the adapter into your
television’s video input connector.
Chapter 5: Sharing Images
50
Connecting the Camera to Your Television
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: To conserve battery power, you may want
to use an HP-approved AC power adapter to
power the camera while you have it connected
to a television.
2 Connect the audio input (red) end of the audio/video cable into the television’s audio input
connector. This will allow you to hear sound that you recorded and attached to your images.
3 Plug the other end of the video cable into the camera (see Figure 27).
Figure 27: Connecting the Video Cable to the Camera
4 On the television, set the video input to be the video input connector where you connected
the camera.
Viewing Images on the Television
When the camera is connected to a television, you can play or review your images on the television
screen just as you would on the camera’s image LCD. You can also mark, protect, categorize, group,
or delete images, or create a slideshow.
To view images on a television:
1 Turn on the television and select the video input. See your television’s documentation for
specific instructions on how to select the video input.
2 Set the camera mode dial to either Playback mode
or Review mode
.
Note: When the camera is connected to a
3 View your images on the television using either Playback or Review mode.
television, the image LCD turns off.
The television functions the same as the camera’s image LCD. You can use the buttons on the
4-way controller to scroll through your images, or press the MENU button on the back of the
camera to use the camera menus on your television’s screen.
Chapter 5: Sharing Images
51
Connecting the Camera to Your Television
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6: Menu and Soft Key Reference
Overview
Note: Updates for your camera’s firmware are
posted from time-to-time on the HP website at:
www.hp.com/photosmart. You can install
these updates on your camera so that you can
always have the most current functionality
running on it.
This chapter contains a reference to all of the menus and soft keys you can use to make or adjust
settings on your camera. This chapter is divided into three main sections, which correlate to the three
camera modes that have menus and soft keys:
Š
Š
Š
“Capture Mode Menus and Soft Keys” on page 52
“Playback Mode Menu and Soft Keys” on page 74
“Review Mode Menus and Soft Keys” on page 78
Note: The PC Connect mode does not have
any menus or soft keys; thus, that mode is not
included in this chapter.
Capture Mode Menus and Soft Keys
To access the Capture mode menus and related soft keys, turn the camera mode dial to Capture
mode
and press the MENU button on the back of the camera. You can choose options and
settings from four Capture mode menus:
Š
Š
Š
Š
“Capture Settings Menu” on page 52
“Photo Assist Menu” on page 55
“Image Stamp Menu” on page 62
“Preferences Menu” on page 66
Capture Settings Menu
Figure 28: Capture Settings Menu
Use the Capture Settings menu to specify characteristics of how to capture each image.
Table 7: Capture Settings Soft Keys
Soft Key
Function
Edit
Opens submenu associated
with selected menu option.
Exit
Exits this menu and returns
the camera to Capture mode.
Chapter 6: Menu and Soft Key Reference
52
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
File Settings Submenu
Note: All options you set are active from shot-
to-shot; they also remain set when you cycle
the power on the camera.
Use the File Settings submenu to set how your pictures will be captured for all image types (One
Shot, Continuous, and Timelapse).
Figure 29: File Settings Submenu - JPEG
Table 8: File Settings Submenu
Setting
Default
JPEG
Options
File Type
JPEG, TIFF
Quality Level
(Specifies JPEG
compression level
and does not apply
to TIFF images.)
Better
Good - Produces quality images and uses less memory than the Better
setting (uses the highest compression rate). Use this setting for images
you plan to use on a computer, or to print photos of up to 4” x 6”.
Better - Produces high-quality images and uses less memory than the
Best setting (uses a medium compression rate). Use this setting for
images you plan to print photos of up to 5” x 7”.
Best - Produces the highest-quality images and uses the most memory
(uses the lowest compression rate). Use this setting for images you plan
to enlarge and print photos of up to 8” x 10”.
Resolution
Color
Full Size
Full
Full Size (1600 x 1200 pixels)
1/4 (800 x 600 pixels)
Full, B&W, Sepia
Figure 30: File Settings Submenu - TIFF
Note: TIFF is an uncompressed file type used
when you need the absolute best image quality.
Because TIFF file size is very large, it may take
up to 50 seconds to save the image.
Chapter 6: Menu and Soft Key Reference
53
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: “Storage Capacities of Memory Cards”
Table 9: File Settings Soft Keys
on page 109 lists the number of images an 8
MB, 16 MB, and 32 MB memory card can store,
depending on the JPEG quality level or TIFF
setting at which the camera is set.
Soft Key
Function
Default
Returns all settings on screen to
their defaults.
Exit
Saves the settings, exits this
submenu, and returns the camera to
the Capture Settings menu.
Timelapse Settings Submenu
Note: All options you set are active from shot-
to-shot; they also remain set when you cycle
the power on the camera.
Use the Timelapse Settings submenu to specify the number and interval of images in a
timelapse sequence.
Figure 31: Timelapse Settings Submenu
Table 10: Timelapse Settings Submenu
Setting
# Images
Interval
Default
2
Options
2-1,000
15 seconds
Seconds - 15 sec, 30 sec
Minutes - 1 min, 2 min, 3 min, 4 min, 5 min,
10 min, 15 min, 20 min, 30 min, 50 min
Hours - 1 hr, 2 hr, 3 hr, 4 hr, 8 hr, 12 hr, 24 hr
Note: If you select more # Images than there is
space on the memory card, you will see the
error message “Not enough memory” on the
overlay bar.
Table 11: Timelapse Settings Soft Keys
Soft Key
Function
Default
Returns all settings on screen to
their defaults.
Exit
Saves the settings, exits this
submenu, and returns the camera
to the Capture Settings menu.
Chapter 6: Menu and Soft Key Reference
54
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Assist Menu
Use the Photo Assist menu to manipulate these more advanced camera operations:
Figure 32: Photo Assist Menu
Š
Š
Š
Š
Š
Š
Exposure
EV Compensation
White Balance
Focus
AE Metering
ISO Speed
Table 12: Photo Assist Soft Keys
Soft Key
Function
Edit
Opens submenu associated with
highlighted menu option.
Exit
Exits this menu and returns the
camera to Capture mode.
Chapter 6: Menu and Soft Key Reference
55
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The option you set is active from shot-to-
shot; it resets to its default setting when you
cycle the power on the camera.
Exposure Mode Submenu
Use the Exposure Mode submenu to select how the camera calculates exposure. You can select from
these setting options:
Figure 33: Exposure Mode Submenu
Š
Š
Auto (Default) − All exposure settings are at their defaults and cannot be changed.
Landscape Program − Automatically optimizes the camera settings for taking pictures of
distant subjects, such as landscape scenes.
Š
Š
Portrait Program − Automatically optimizes the camera settings for portrait photography.
Action Program − Automatically optimizes the camera settings for taking pictures of subjects
in action, such as people playing sports.
Š
Š
Aperture Priority (Av) − Lets you select an aperture, and the camera automatically selects the
shutter speed.
Shutter Priority (Tv) − Lets you select a shutter speed, and the camera automatically selects
the aperture setting.
If you select Landscape Program, Portrait Program, Action Program, or Shutter Priority exposure
modes, then the ISO Speed submenu options will be grayed-out as soon as you exit the Exposure
Mode submenu. Likewise, if you change the exposure mode from Landscape Program, Portrait
Program, Action Program, or Shutter Priority to either Auto or Aperture Priority (Av) exposure mode,
then the ISO Speed options will become available as soon as you exit the Exposure Mode submenu.
After you set the exposure mode to Aperture Priority (Av) or Shutter Priority (Tv) and exit the
submenu, the live view of Capture mode will turn on automatically. You can then use the 4-way
controller to adjust the aperture value (if in Av mode) or shutter speed (if in Tv mode) by pressing the
up and down arrows (see below). If the camera cannot properly expose because the picture subject is
out of range, as in very bright or very dark scenes, the text string (such as Av F5.6 1/1500) will turn red
in the top overlay bar of live view. If you turn the image LCD off, the exposure mode will not change,
but you will be unable to adjust the aperture value or shutter speed with the 4-way controller.
When you set the exposure mode to Aperture Priority (Av) and live view is on, pressing the up and
down arrows on the 4-way controller will perform these specific functions:
Š
Š
Up arrow − stops down the aperture (toward higher f-numbers)
Down arrow − stops up the aperture (toward lower f-numbers)
When you set the exposure mode to Shutter Priority (Tv) and live view is on, pressing the up and
down arrows on the 4-way controller will perform these specific functions:
Š
Š
Up arrow − decreases toward shorter shutter speeds
Down arrow − increases toward faster shutter speeds
Chapter 6: Menu and Soft Key Reference
56
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 13: Exposure Mode Soft Keys
Soft Key
Function
Select
Places a checkmark by the
highlighted setting, then returns to
the Photo Assist menu.
Exit
Returns to the Photo Assist menu
without changing the setting.
EV Compensation Submenu
Note: The option you set is active from shot-to-
shot; it resets to its default setting when you
cycle the power on the camera.
Use the EV (Exposure Value) Compensation submenu to manually adjust the exposure in
0.5 EV increments (- values for darker images, + values for lighter images). You can select from
these options:
Figure 34: EV Compensation Submenu
Š
Š
Š
Š
Š
Š
Š
Š
Š
-2.0
-1.5
-1.0
-0.5
0 (Default)
+0.5
+1.0
+1.5
+2.0
Table 14: EV Compensation Soft Keys
Soft Key
Function
Default
Sets the exposure compensation
to the default value.
Exit
Saves the setting and returns to
the Photo Assist menu.
Chapter 6: Menu and Soft Key Reference
57
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance Submenu
Note: The option you set is active from shot-to-
shot; it resets to its default setting when you
cycle the power on the camera.
Use the White Balance submenu to correct the color applied to a captured image under different
lighting conditions in order to make white areas in the image appear white without any color cast.
You can select from these setting options:
Figure 35: White Balance Submenu
Š
Auto (Default) − Use when you want the camera to automatically sense the lighting conditions
and adjust the white balance appropriately for optimum color reproduction in the image.
Š
Š
Daylight − Use when you are taking a picture in daylight without artificial lighting.
Tungsten − Use when you are taking a picture under normal incandescent lighting, such as the
light from tungsten filament light bulbs in household lamps.
Š
Fluorescent − Use when you are taking a picture under fluorescent lighting.
Table 15: White Balance Soft Keys
Soft Key
Function
Select
Places a checkmark by the
selected setting, then returns to
the Photo Assist menu.
Exit
Returns to the Photo Assist menu
without changing the setting.
Chapter 6: Menu and Soft Key Reference
58
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus Mode Submenu
Note: The option you set is active from shot-to-
shot; it resets to its default setting when you
cycle the power on the camera.
Use the Focus Mode submenu to control how your camera focuses. You can select from these
setting options:
Š
Š
Auto Focus (Default)
Manual Focus
Figure 36: Focus Mode Submenu
After you set the focus mode to Manual Focus and exit the submenu, the live view of Capture mode
will turn on automatically, and the focus distance will appear in the far left side of the top overlay
bar. You can then adjust the focus distance by pressing the left and right arrows on the 4-way
controller (see below). If you turn off the image LCD, Manual Focus will still be on, but you will no
longer be able to adjust the focus distance with the 4-way controller.
When you set the focus mode to Manual Focus and live view is on, pressing the right and left arrows
on the 4-way controller will perform these specific functions:
Š
Š
Right arrow − increases focus distance
Left arrow − decreases focus distance
Note: Setting the camera to Manual focus
mode cancels any selected auto focus
range (Macro or Infinity) and turns off the
corresponding icon on the status LCD.
Table 16: Focus Mode Soft Keys
Soft Key
Function
Select
Places a checkmark by the
highlighted setting, then returns to
the Photo Assist menu.
Exit
Returns to the Photo Assist menu
without changing the setting.
Chapter 6: Menu and Soft Key Reference
59
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The option you set is active from shot-to-
shot; it resets to its default setting when you
cycle the power on the camera.
AE Metering Submenu
Use the AE (Automatic Exposure) Metering submenu to select the area of the scene that the camera
will use to set the exposure when you take a picture.
Figure 37: AE Metering Submenu
Table 17: AE Metering Submenu
Setting
Function
Average (default)
The camera uses the entire frame to
calculate exposure.
Center-weighted
Spot
The camera uses the center half of
the total pixels to calculate exposure.
The camera calculates exposure
based only on a small region in the
center of the scene.
Table 18: AE Metering Soft Keys
Soft Key
Function
Select
Places a checkmark by the
highlighted setting, then returns to the
Photo Assist menu.
Exit
Returns to the Photo Assist menu
without changing the setting.
Chapter 6: Menu and Soft Key Reference
60
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
ISO Speed Submenu
Note: The option you set is active from shot-to-
shot; it resets to its default setting when you
cycle the power on the camera.
Use the ISO Speed submenu to set the ISO speed. Similar to film, slower ISO speeds require longer
exposures, but produce higher quality images. In contrast, faster ISO speeds allow for shorter
exposures, but produce noisier images. You can select from these setting options:
Figure 38: ISO Speed Submenu
Š
Š
Š
Auto (Default) − The camera automatically determines the best ISO speed for the scene.
100
200
The ISO Speed submenu is only available for Auto and Aperture Priority exposure modes. When the
exposure mode is set to Landscape Program, Portrait Program, Action Program, or Shutter Priority,
the ISO Speed submenu is grayed-out and the ISO Speed is set to Auto.
Table 19: ISO Speed Soft Keys
Soft Key
Function
Select
Places a checkmark by the
highlighted setting, then returns
to the Photo Assist menu.
Exit
Returns to Photo Assist menu
without changing the setting.
Chapter 6: Menu and Soft Key Reference
61
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Stamp Menu
Note: An image stamp becomes permanently
embedded in the image and overwrites data in
the image. You cannot remove it later.
Use the Image Stamp menu to place watermarks on your images as you capture them. The Image
Stamp menu has these options:
Figure 39: Image Stamp Menu
Š
Š
Š
Date & Time
Text
Logo
Table 20: Image Stamp Soft Keys
Soft Key
Function
Edit
Opens submenu associated with
the selected menu option.
Exit
Exits this menu and returns to
the live view in Capture mode.
Date/Time Stamp Submenu
Figure 40: Date/Time Stamp Submenu
Use the Date/Time Stamp submenu to stamp an image with the current date, time, both date and
time, or neither.
You can set the following properties of the date/time stamp:
Š
Š
Š
Š
Š
Type
Placement
Transparency
Text color
Background
Chapter 6: Menu and Soft Key Reference
62
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 21: Settings for Date/Time, Text, and Logo Stamp Submenus
Setting
Type
Options
None (default), Both, Date, Time
Placement
Top right quadrant of image
Center of image
Bottom left quadrant of image
Bottom right quadrant of image
Top left quadrant of image
Transparency
Opaque - There will be a background box around the text.
Semi - There will be a translucent background box.
Clear - There will be no background behind the text.
Text Color
White, red, green, blue, cyan, magenta, yellow, black
Black, white, red, green, blue, cyan, magenta, yellow
Background
Note: If you have set the Color in the File
Settings submenu to either B&W (black and
white) or Sepia, the Image Stamp will also be
B&W or Sepia, regardless of the color you set
for the Text and Background Colors in the
Image Stamp menu.
Table 22: Date/Time Stamp Soft Keys
Soft Key
Function
Default
Returns all settings on screen to
their defaults
Exit
Saves the settings, exits this
submenu, and returns to the
Image Stamp menu.
Chapter 6: Menu and Soft Key Reference
63
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Text Stamp Submenu
Figure 41: Text Stamp Submenu
Use the Text Stamp submenu to stamp an image with text that you enter using the text entry dialog.
Text Stamp is either On or Off, and the default is Off. When it is On, you can set the following
properties of the text stamp:
Š
Š
Š
Š
Placement
Transparency
Text color
Background
Note: Text strings can be a maximum of
Table 23: Text Stamp Soft Keys
31 characters.
Soft Key
Function
Edit
Opens text entry screen to enter
the text stamp that will appear
on the images. (Available only
when the first line is set to On.)
Default
Exit
Returns all settings on screen to
their defaults.
Exits this submenu and returns
to the Image Stamp menu.
Chapter 6: Menu and Soft Key Reference
64
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Logo Stamp Submenu
Figure 42: Logo Stamp Submenu
Logo Stamp is either On or Off, and the default is Off. When it is On, you can:
Š
Š
Š
Š
Š
Stamp the image with a logo file
Choose one logo from a list
Choose the placement of the logo
Choose the color
Choose the transparency level
Table 24: Logo Stamp Soft Keys
Soft Key
Function
Edit
Opens the Logo Files dialog.
(Available only when Logo
Stamp is on.)
Default
Exit
Returns all settings on screen to
their defaults.
Exits this submenu and returns
to the Image Stamp menu.
Logo Files Dialog
Note: By default, no logo files are included with
your camera. To learn how to get logo files, see
the HP website at: www.hp.com/photosmart.
When you press the Edit soft key in the Logo Stamp submenu, the Logo Files dialog is displayed. Use
the up and down arrows on the 4-way controller to select the file you want to use as the Logo Stamp
from the list of available files.
Table 25: Logo Files Soft Keys
Soft Key
Function
Select
Places a checkmark next to the logo file, returns to the
Logo Stamp submenu, and displays the selected file
name in the second line of the submenu.
Exit
Exits this dialog and returns to Logo Stamp submenu.
Chapter 6: Menu and Soft Key Reference
65
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: All options you set in the Preferences
menu are active from shot-to-shot; they also
remain set when you cycle the power on
the camera.
Preferences Menu
Use the Preferences menu to change a variety of your camera’s general settings. You can select from
these options:
Figure 43: Preferences Menu
Š
Š
Š
Š
Š
Š
Š
Š
Š
Display
Sound
Format Card
PC Connect Mode
Date & Time
Image Counter
Camera Name
Language
Reset Settings
Note: For more information on using the
Preferences menu to set up your camera,
see “Appendix A: Using the Preferences Menu”
starting on page 94.
Table 26: Preferences Soft Keys
Soft Key
Function
Edit
Format
Reset
Exit
Opens submenu associated with
the highlighted menu option.
Available only when Format Card
is highlighted.
Available only when Reset
Settings is highlighted.
Exits this submenu and returns
camera to Capture mode.
Chapter 6: Menu and Soft Key Reference
66
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Submenu
Figure 44: Display Submenu
Use the Display submenu to control the display on the camera’s image LCD.
Table 27: Display Submenu
Setting
Default
4
Options
Brightness Level
1 (dimmest) - 7 (brightest)
Instant Review
(see Note)
3 sec
1-10 sec
15 sec
20 sec
25 sec
30 sec
Off
Live View
(see Note)
Off
On / Off
Sleep Timeout
(see Note)
2 min
30 sec
1 min
2 min
5 min
Note: The Instant Review setting determines the
amount of time an Instant Review of an image
you just captured is displayed on the image
LCD. See “Using Instant Review” on page 25 for
more information.
Table 28: Display Soft Keys
Soft Key
Default
Exit
Function
Returns all settings to their defaults.
The Live View setting determines whether the
live view of Capture mode will automatically
display on the image LCD or not when you
power on the camera and set the camera to
Capture mode.
Saves the settings, exits this
submenu, and returns to the
Preferences menu.
The Sleep Timeout setting determines how
quickly the camera goes into sleep mode and
turns off the image LCD when you are not using
the camera.
Chapter 6: Menu and Soft Key Reference
67
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Submenu
Figure 45: Sound Submenu
Use the Sound submenu to control the sounds used on your camera.
Table 29: Sound Submenu
Setting
Default
Options
1 (lowest) - 7 (highest)
On / Off
Volume Level
7
System Sounds
(see Note)
On
Note: The System Sounds setting determines
whether or not you will hear the camera’s
system sounds, such as shutter clicks, beeps,
and so forth.
Table 30: Sound Soft Keys
Soft Key
Function
Default
Exit
Returns all settings to their defaults.
Saves the settings, exits this
submenu, and returns to the
Preferences menu.
Format Card Option
Figure 46: Format Card Confirmation Screen
Use the Format Card option to reformat the memory card. Reformatting will erase all of the
files on the card, including all images, protected files, folders, scripts, and so forth. You will see a
confirmation of your choice to format the memory card (see Figure 46).
Table 31: Format Card Soft Keys
Soft Key
Format
Function
Reformats the memory card.
Cancel
Exits the confirmation screen and
returns to the Preferences menu.
Chapter 6: Menu and Soft Key Reference
68
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Connect Mode Submenu
Figure 47: PC Connect Mode Submenu
Use the PC Connect Mode submenu to specify how the camera will appear to your computer when
connected via the USB interface in PC Connect mode. You can then transfer images from your
camera to the computer via the USB interface.
Table 32: PC Connect Mode Submenu
Setting
Function
USB Disk Drive
The camera is operated as a USB Mass Storage Device and
appears as a disk drive connected to the computer. You
can copy images from your camera to the computer as
you would from another disk drive. Use this setting to
connect the camera to a Mac OS 8.6 or better computer,
or to a Windows Me, 98, or 2000 computer.
Digita Device (default)
You can use software included with your computer or
camera to transfer images to the computer. Use this
setting to connect the camera to a Windows Me, 98, or
2000 computer.
Note: For more information on using the
PC Connect Mode settings, see “Transferring
Images to Your Computer” on page 38.
Table 33: PC Connect Mode Soft Keys
Soft Key
Function
Select
Places a checkmark next to the
selected item and returns to the
Preferences menu.
Default
Exit
Resets the settings to their defaults.
Exits this submenu without changing
the settings and returns to the
Preferences menu.
Chapter 6: Menu and Soft Key Reference
69
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Date & Time Submenu
Figure 48: Set Date & Time Submenu
Use the Set Date & Time submenu to set the camera’s date and time. Press the up and down arrows
on the 4-way controller to scroll through the list of numbers. Press the left and right arrows to move
between the date/time fields.
Table 34: Set Date & Time Soft Keys
Soft Key
Function
Format
Opens the Format List dialog
where you can select the format.
Exit
Saves the date and time settings,
exits this submenu, and returns to
the Preferences menu.
Format Dialog
Figure 49: Format Dialog
When you press the Format soft key in the Set Date & Time submenu, you see the Format dialog,
which allows you to select from a list of six, predefined date and time formats.
Table 35: Format Soft Keys
Soft Key
Function
Select
Places a checkmark next
to the selected format and
returns to the Set Date &
Time submenu.
Exit
Exits this dialog and
returns to the Set Date &
Time submenu.
Chapter 6: Menu and Soft Key Reference
70
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Counter Submenu
Figure 50: Image Counter Submenu
Use the Image Counter submenu to set how the image counter works.
Table 36: Image Counter Submenu
Setting
Function
Reset When Empty
Each time you delete all of
the images on your camera,
the counter restarts the first
image captured at number 1.
Continuous Counter
(default)
The images are counted
according to the history of
the camera’s use. For
example: image #400 is the
400th image to be captured
with this camera.
Note: Once you have changed the Image
Counter setting, you must power the
camera off and then on again for the new
setting to take effect.
Table 37: Image Counter Soft Keys
Soft Key
Function
Select
Places a checkmark next to the
selected setting and returns to the
Preferences menu.
Exit
Returns to the Preferences menu
without changing the setting.
Chapter 6: Menu and Soft Key Reference
71
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Name Submenu
Figure 51: Camera Name Submenu
Use the Camera Name submenu to enter a unique name for your camera.
Press the left (Character Set Icon) soft key to toggle through the four character sets (capital letters,
lowercase letters, numbers, and symbols) until you see the character set you want to use displayed
in the left soft key label area on the overlay bar. Then press the:
Š
Š
Up or down arrow on the 4-way controller to scroll through the list of characters.
Right arrow on the 4-way controller to enter the selected character and advance the
insertion point in the center of the screen.
Š
Š
Left arrow on the 4-way controller to back up and delete a character.
Middle (Space) soft key to create a space between words in the camera name.
Table 38: Camera Name Soft Keys
Note: Words wrap to the next line when they
get too long.
Soft Key
Function
Character Set Icon
Toggles through four character
sets: capital letters, lowercase
letters, numbers, and symbols.
Space
Exit
Adds a space, instead of a letter,
and advances the insertion point.
(The Space key does not appear
if a space is not a valid character.)
Saves the text entered and
returns to the Preferences menu.
Chapter 6: Menu and Soft Key Reference
72
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Submenu
Figure 52: Language Submenu
English is set as the default language that is used on the camera. Use the Language submenu to
select a language from the list of installed languages.
Table 39: Language Soft Keys
Soft Key
Function
Select
Places a checkmark next to the
highlighted language and returns to
the Preferences menu. The selected
language is now used.
Exit
Returns to the Preferences menu
without changing the setting.
Reset Settings Option
Figure 53: Reset Settings Confirmation Screen
Use the Reset Settings option to reset all of the camera settings (except for the Language, Format for
the Set Date & Time, PC Connect Mode, and Video Preferences settings) to their defaults in one step.
You will see a confirmation of your choice to reset the camera settings (see Figure 53).
Table 40: Reset Settings Soft Keys
Soft Key
Function
Reset
Resets all camera settings to their
defaults and returns to the
Preferences menu.
Cancel
Returns to the Preferences menu
without changing the settings.
Chapter 6: Menu and Soft Key Reference
73
Capture Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Mode Menu and Soft Keys
To access the Playback mode menu and related soft keys, turn the camera mode dial to Playback
mode
and press the MENU button on the back of the camera. Once you have captured
images, you can choose options and settings for the images within the one menu (Play Settings) of
Playback mode.
Play Settings Menu
Figure 54: Play Settings Menu
There are three options in this menu:
Š
Š
Š
Slideshow
Playback Rate
Video
Table 41: Play Settings Soft Keys
Soft Key
Function
Edit
Displays submenu for the
highlighted option.
Exit
Exits this menu and returns to the
Playback mode screen.
Chapter 6: Menu and Soft Key Reference
74
Playback Mode Menu and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Slideshow Submenu
Figure 55: Slideshow Submenu
Use the Slideshow submenu to select the criteria for a slideshow to be viewed “on the fly.”
Table 42: Slideshow Submenu
Setting
Content
Duration
Sound
Default
All
Options
All, Category
1-10 sec
2 sec
On
On, Off
Loop
On
On, Off
Table 43: Slideshow Soft Keys
Soft Key
Start
Function
Exits this submenu and displays the slideshow.
Cancel
Exits this submenu without changing the settings
and returns to the Play Settings menu.
Exit
Sets all the settings, exits this submenu, and
returns to the Play Settings menu.
Chapter 6: Menu and Soft Key Reference
75
Playback Mode Menu and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Rate Submenu
Figure 56: Playback Rate Submenu
Use the Playback Rate submenu to establish a default playback rate for each image type.
Table 44: Playback Rate Submenu
Setting
Timelapse
Group
Default
3 sec
Options
1-10 sec rate
1-10 sec rate
3 sec
Table 45: Playback Rate Soft Keys
Soft Key
Function
Default
Cancel
Returns all settings to their defaults.
Exits this submenu without changing the settings
and returns to the Play Settings menu.
Exit
Sets all the settings, then exits this submenu, and
returns to the Play Settings menu.
Chapter 6: Menu and Soft Key Reference
76
Playback Mode Menu and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Preferences Submenu
Figure 57: Video Preferences Submenu
Use the Video Preferences submenu to specify the video format: NTSC or PAL. The format that you
choose (NTSC or PAL) depends on your television’s video input format:
Š
Š
NTSC is the video connection standard used in the United States and Japan.
PAL is the video connection standard used in Europe.
Table 46: Video Preferences Submenu
Setting
Default
Options
Video Out
NTSC
NTSC, PAL
Table 47: Video Preferences Soft Keys
Soft Key
Function
Cancel
Exits this submenu without
changing the settings and returns
to the Play Settings menu.
Exit
Saves the setting, exits this
submenu, and returns to the Play
Settings menu.
Chapter 6: Menu and Soft Key Reference
77
Playback Mode Menu and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Review Mode Menus and Soft Keys
To access the Review mode menus and related soft keys, turn the camera mode dial to Review mode
and press the MENU button on the camera. Once you have captured images, you can change
specifications for the images within the four Review mode menus:
Š
Š
Š
Š
“Edit Menu” on page 78
“Print Order Form Menu” on page 81
“Transmit Menu” on page 84
“Find Menu” on page 86
Edit Menu
Figure 58: Edit Menu
Use the Edit menu to perform the following actions on selected images:
Š
Š
Š
Š
Delete
Group
Protect
Categorize
Delete Option
Figure 59: Delete Confirmation Screen
Use the Delete option to delete the current image, a group of images, or all of the marked images
from the memory card. Note that protected images within a group marked for deletion will not be
deleted until you unprotect them. You will see a confirmation of your choice to delete the images
(see Figure 59).
Table 48: Delete Soft Keys
Soft Key
Function
Delete
Deletes the selected image(s) and then
returns to the Review mode screen.
Cancel
Exits and returns to the Review mode
screen without deleting image(s).
Chapter 6: Menu and Soft Key Reference
78
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: A group becomes a folder on the
memory card, in which all the images in that
group are stored.
Group Name Submenu
Use the Group Name submenu to group all of the images that you have marked. You can start a
group, add images to an existing group, or move images from one group to a new group. Note that
you can use the Dissolve soft key to dissolve groups.
Figure 60: Group Name Submenu
Table 49: Group Name Soft Keys
Soft Key
Function
Add (If current image is
not grouped, but at least
one group exists.)
Displays a dialog that allows you to create a
new group or add to an existing group. (Images
are moved into groups, not replicated.)
Create (If current image
is not grouped and no
groups exist.)
Dissolve
Exit
Removes any grouping previously applied.
Exits and returns to the Review mode screen.
Protect Option
Figure 61: Protect Option
Use the Protect option to protect or unprotect marked images. When an image is protected, you can’t
delete it. If there are no marked images, then the Protect command protects the currently selected
image. If the marked or selected single image is unprotected, only the Protect soft key appears. If the
image is protected, only the Unprotect soft key appears. If multiple images, both protected and
unprotected, are marked, then both the Protect and Unprotect soft keys appear.
Once you have protected an image, the following restrictions apply to the image file:
Š
Š
Š
Š
Š
Š
Š
You cannot delete the image nor an attached sound.
You cannot attach or re-record a sound.
You cannot attach, change, or remove a category.
Deleting a group will delete only the unprotected images within that group.
You cannot change the file name.
You can move the image file into and out of groups.
The image file will be marked “Read Only” in Windows when transferred to a PC.
Chapter 6: Menu and Soft Key Reference
79
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 50: Protect Soft Keys
Soft Key
Function
Protect
Appears if selected images are unprotected.
Allows you to protect the current image.
Unprotect
Exit
If multiple images are marked, this soft key
appears along with the Protect soft key.
Allows you to unprotect images.
Cancels the protect operation and returns
to the Review mode screen.
Note: A category is an image tag which is
useful for finding images or playing a
slideshow of a category of images.
Categories Submenu
Use the Categories submenu to assign images to a category. The camera has predefined categories,
such as vacation, work, pets, family, and friends
Figure 62: Categories Submenu
Choose the category you want using the 4-way controller, then use the Select soft key to attach the
category to the image. You can assign categories to one image at a time, or you can categorize all
marked images at once.
Table 51: Categories Soft Keys
Soft Key
Function
Select
Assigns a category to an image or marked
images. Places a checkmark next to the
assigned category.
Exit
Updates the image files with the new categories
and returns to the Review mode screen.
Chapter 6: Menu and Soft Key Reference
80
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Print Order Form Menu
Figure 63: Print Order Form Menu
Use the Print Order Form menu to create a Digital Print Order Format (DPOF) file.
Table 52: Print Order Form Menu
Option
Function
Add Images
Allows you to add current image or marked
images to the DPOF file. Opens a secondary
screen to specify number of copies and size
of photos.
View Order
Erase Order
Displays a scrolling list of the contents of
the DPOF file.
Erases the contents of your DPOF file.
Note: See “Using a Digital Print Order Format
(DPOF) File” on page 44 for more information.
Table 53: Print Order Form Soft Keys
Soft Key
Function
Add/Select
Erase
Opens appropriate submenu.
Asks for confirmation to delete all entries of
the DPOF file.
Exit
Exits and returns to the Review mode screen.
Chapter 6: Menu and Soft Key Reference
81
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Add to Order Submenu
Figure 64: Add to Order Submenu
Use the Add to Order submenu to add current or marked images to the DPOF file and to set up the
print settings for those images.
If you have any marked images, they are added to the order. If no images are marked, the image
currently selected in the Review mode is added to the order.
Table 54: Add to Order Submenu
Setting
Copies
Size
Options
1-999 (1=default)
Index - Thumbnails
Standard (default) - One of
the standard print sizes
(see Note)
Note: Standard means one of the standard
print sizes. You specify the exact size you want
your Standard prints to be at the printer. For
example, you can specify that all Standard
images be printed at 4” x 6”.
Table 55: Add to Order Soft Keys
Soft Key
Function
Add
Adds images to the DPOF file.
Exits without adding images.
Cancel
Chapter 6: Menu and Soft Key Reference
82
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
View Order Option
Figure 65: Print Order Form Screen of the
Use the View Order option to view a list of ordered images in the DPOF file. You can scroll through
this list using the up and down arrows on the 4-way controller. However, you cannot edit this list.
View Order Option
Table 56: View Order Option Soft Key
Soft Key
Function
Exit
Returns to the Print Order Form menu.
Erase Order Option
Figure 66: Erase Order Confirmation Screen
Use the Erase Order option to erase all of the entries from the DPOF file. You will see a confirmation
of your choice to erase all entries (see Figure 66).
Table 57: Erase Order Soft Keys
Soft Key
Erase
Function
Erases the contents of the DPOF file.
Exit
Returns to the Print Order Form menu
without clearing the DPOF file.
Chapter 6: Menu and Soft Key Reference
83
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmit Menu
Figure 67: Transmit Menu
Use the Transmit menu to transfer images in one of two ways:
Š
Š
Camera-Camera
Camera-Printer
Camera-Camera Option
Use the Camera-Camera option to send current or marked images to, or receive images from,
another Digita camera.
Note: For more information, see “Transmitting
Images Between Two Cameras” on page 48.
Table 58: Camera-Camera Soft Keys
Soft Key
Function
Send
Sets the camera into sender mode.
Displays a screen to confirm sending
images to another camera and then
returns to the Review mode screen.
Receive
Sets the camera to receiver mode.
Brings up a screen to confirm
receiving images from another
camera and returns to the Review
mode screen.
Stop
Exit
Stops transmitting and returns to the
Transmit menu.
Exits this screen and returns to the
Review mode screen.
Chapter 6: Menu and Soft Key Reference
84
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera-Printer Option
Use the Camera-Printer option to send current or marked images to a printer via the
HP JetSend infrared technology.
Note: For more information, see “JetSending
Images to a Printer” on page 46.
Table 59: Camera-Printer Soft Keys
Soft Key
Function
Send
Sets the camera to sender mode.
Displays a screen to confirm sending
images and then returns to the Review
mode screen.
Exit
Exits this screen and returns to the
Review mode screen.
Chapter 6: Menu and Soft Key Reference
85
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Find Menu
Figure 68: Find Menu
Use the Find menu to search for specific images, either by category or by date (but not both at the
same time). When you return to the Review mode to view the results of the find operation, the Find
icon will appear in the lower, right corner. All find results will be chronologically displayed. If no
images match your search criteria, then you will see an error message.
Table 60: Find By Date and Find By Category Soft Keys
Soft Key
Function
Edit
Displays specific find options (Find By
Date, or Find By Category).
Select
Exit
Selects the category to find.
Exits the Find screen and returns to the
Review mode screen.
Mark
After the Find operation, marks a selected
image.
Show All
After the Find operation, returns the
thumbnail row to the original,
chronological list of images and turns off
the Find icon.
Chapter 6: Menu and Soft Key Reference
86
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Find By Date Submenu
Figure 69: Find By Date Submenu
Use the Find By Date submenu to enter the range of dates using the 4-way controller.
Table 61: Find By Date Soft Keys
Soft Key
Function
Find
Executes the Find criteria and returns to the
Review mode screen to display results.
Exit
Exits this screen and returns to the Find menu
without executing the Find command.
Find By Category Submenu
Figure 70: Find By Category Submenu
Use the Find By Category submenu to scroll through the list of categories and enter the “find”
category with the 4-way controller. You can then use the Select soft key to select the category with
which you want to do the search.
Table 62: Find By Category Soft Keys
Soft Key
Function
Select
Selects the checkmarked category from the Find By
Category list and executes the Find command.
Exit
Exits this screen and returns to the Find menu without
executing the Find command.
Chapter 6: Menu and Soft Key Reference
87
Review Mode Menus and Soft Keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Troubleshooting
Overview
This chapter explains how to troubleshoot some common problems you may encounter while using
your camera.
If you still cannot remedy the problem, contact HP for help. See “Contacting HP Customer Care” on
page 93.
Troubleshooting Common Problems
Note: For information about preserving battery
life and about HP accessories you can use to
power the camera (such as the HP AC power
adapter, and the HP rechargeable batteries and
battery recharger), see Appendix B starting on
page 103.
Problem
Solution
The camera will not
power on
Š
If you are using batteries:
Š
Check the type of batteries that you have installed in the camera. They
may not be the appropriate type for a digital camera. Use only high
quality AA photo lithium, high drain alkaline, or NiMH batteries.
Š
Š
Check to make sure the batteries are inserted correctly. The positive and
negative poles may be reversed.
The batteries’ charge may be low or completely drained. Try installing
new batteries or recharged batteries,
Š
Š
If you are using the HP AC power adapter instead of batteries:
Š
Š
Š
Is the AC power adapter plugged in?
Is there power at the outlet?
Is the AC power adapter dead?
Also see the next problem and solution, below.
The camera is not
responding at all − it
won’t power on or off
Open the battery compartment door, remove the batteries and/or unplug the HP AC
power adapter, and let the camera sit for about 20 minutes with the battery door
open to allow the camera to discharge fully. Then either re-install the batteries or
plug in the AC power adapter, close the battery door, and try powering on the
camera again.
The camera is powered
on, but there’s no display
on the image LCD
Š
Š
Š
Press the DISPLAY button again.
Power the camera off and then on again.
The batteries may be nearly drained. (If so, you should see an empty battery
status icon on the status LCD.) Leave the image LCD turned off, or insert
charged batteries.
Chapter 7: Troubleshooting
88
Troubleshooting Common Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Solution
The camera is powered
on, but when I press a
button, the camera does
not respond
Š
Š
Try powering the camera off and then on again.
Remove the batteries or unplug the HP AC power adapter. Then reinstall the
batteries or plug in the AC power adapter, and power on the camera again.
I always have to re-set the
date and time after I
change the batteries in
the camera or unplug the
HP AC power adapter
from the camera
This will happen if either you remove the batteries from the camera, or you remove
the batteries and unplug the HP AC power adapter, for more than 5 minutes. (Note
that even if the batteries are drained, the date and time will remain set as long as
you leave the drained batteries in the camera.)
When changing batteries, try to put the new batteries in within 5 minutes of when
you remove the old batteries. Similarly, if you are using the HP AC power adapter,
either leave batteries in the camera (even if the batteries are drained) when you
unplug the adapter, or unplug the adapter for less than 5 minutes at a time.
The rechargeable HP
NiMH batteries I’m using
don’t seem to power the
camera for very long
You must recharge all 4 HP NiMH batteries after fully draining them four times for
the batteries to reach their optimum capacity and performance. For more
information, see “Using the HP NiMH Batteries and Recharger” on page 108.
The incorrect language is
set on the camera
1. Set the camera mode dial to Capture mode
2. Power on the camera if you haven’t already.
.
3. Press the MENU button to display the Capture mode menus on the image LCD.
4. Press the right arrow on the 4-way controller three times to move to the
Preferences menu.
5. Press the down arrow on the 4-way controller seven times to move to the
Language menu option.
6. Press the left (Edit) soft key. The Language submenu is displayed.
7. Press the down or up arrow on the 4-way controller to highlight the language
you want.
8. Press the left (Select) soft key to select the highlighted language and to exit this
screen. You return to the Preferences menu of Capture mode, and the camera is now
using the language you set.
9. Press the right (Exit) soft key to exit the menu.
Chapter 7: Troubleshooting
89
Troubleshooting Common Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Solution
The camera is displaying
an error message
There are 3 different types of error messages you may see on the camera:
Š
Š
Š
Memory card is not formatted - “Err” is displayed on the status LCD and the
message “Card requires formatting” is displayed on the image LCD. This
means the memory card needs to be formatted. Either see “Formatting the
Memory Card” on page 98 for information on how to format the card, or
replace the current memory card with another, formatted one.
Flash cannot charge - “Err” and the lightning bolt icon blinks on the status LCD
for 3 seconds, then the camera powers off. “Err” and the lightning bolt will
remain displayed on the status LCD until the batteries are drained. This
problem requires repair of the camera. See “Contacting HP Customer Care” on
page 93 to call HP for help.
Other errors - The camera locks up and blinks a 3-digit error code on the status
LCD. Try powering the camera off and then on again. You may also need to
remove the batteries and install them again. If the problem persists, see
“Contacting HP Customer Care” on page 93 to call HP for help. Be sure to tell
the HP representative the error code that you see displayed on the status LCD.
The camera’s status LCD
is flashing 000
There is no memory card installed in the camera, or the memory card is full. If there
isn’t one installed, power off the camera, install a memory card in it, and then power
on the camera again. If the memory card is full, transfer the images you want to
keep to your computer (see “Transferring Images to Your Computer” on page 38),
and then delete images from the memory card to free-up space.
The image counter on the
camera’s status LCD won’t
reset when the memory
card is empty
The default setting for the image counter is continuous counting of images. If you
want to have it reset to zero when the memory card is empty, you can change the
setting in the Image Counter submenu (under the Preferences menu in Capture
mode). See “Image Counter Submenu” on page 71. Once you have changed the
image counter setting, you must power the camera off and then on again. Also
ensure that the camera’s memory card is completely empty.
The camera will not focus
Š
Š
Š
Ensure that the camera mode dial is set to Capture mode
.
You may be too close to the subject. Try using the Macro auto focus range.
Try using Focus Lock. See “Using Focus Lock” on page 18.
Digital zoom is not
working
For digital zoom to work correctly, the camera’s image LCD must be turned on.
Ensure that the camera mode dial is set to Capture mode
DISPLAY button.
. Then press the
Chapter 7: Troubleshooting
90
Troubleshooting Common Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Solution
The HP Remote Control is
not working
Š
Š
The HP Remote Control does not work while the flash is charging. Try pressing
the Remote Control’s trigger again once the flash has charged.
The HP Remote Control may not work if the camera is sitting under bright
lights or in full sun. In this case, use the 10-Second Timer mode, instead. (See
“Setting the Timer Mode” on page 11.)
Š
The battery in the HP Remote Control may be dead. If so, replace the battery.
The captured images are
over- or under-exposed
Change the exposure compensation setting in the EV Compensation submenu of
the Photo Assist menu. See “EV Compensation Submenu” on page 57.
The computer does not
recognize the camera
when connected via the
USB cable
On both Windows and Macintosh computers:
Š
Š
Š
Š
Š
Is the camera powered on?
Is the camera mode dial set to PC Connect mode
?
Is the USB cable firmly attached to both the camera and computer?
Is the USB port enabled on the computer?
Are you using a USB hub? If so, you may need to reset the hub. (It may have
become disabled due to an electrical disturbance such as that generated by
static electricity.) To reset the USB hub, leave the camera connected to the hub,
disconnect the hub from the computer, and remove power from the hub. Then
reconnect the power to the USB hub and reconnect the hub to the computer.
Š
Try powering the camera off and then on again.
On Windows Me, 98, and 2000 computers:
Š
If you are using the Microsoft Scanner and Camera Wizard (for Windows Me) or
the HP Photo Imaging Software (for Windows 98 and 2000) to transfer images,
is the PC Connect Mode submenu setting (under the Preferences menu of
Capture mode) in the camera set to Digita Device?
Š
If you are using the PC Connect Mode submenu setting of USB Disk
Drive in the camera instead, does the camera appear as a disk drive in
Windows Explorer?
Note: Computers running Windows NT 4.0 cannot connect to the camera via the
USB cable, because Windows NT 4.0 does not support the USB interface. You must
use either an HP P1000/1100 or similar printer, or a memory card reader to transfer
the images to your Windows NT 4.0 computer, instead.
On Macintosh computers:
Š
Is the PC Connect Mode submenu setting (under the Preferences menu of
Capture mode) in the camera set to USB Disk Drive?
Chapter 7: Troubleshooting
91
Troubleshooting Common Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Solution
A TWAIN error occurs
when a software program
tries to acquire an image
from the camera
Š
Š
Verify that the software program can see the camera through its own TWAIN
select source. While software programs vary on how to select a TWAIN source,
generally the easiest way to determine whether a program supports TWAIN is
to see if there is an Acquire selection in the File menu. If not, then check for a
TWAIN command located under the Import selection of the File menu. If
neither exits, and you have a scanner, check the manual for the software
program to see if you can use TWAIN to scan images, instead.
For more detailed information about this problem, consult the Technical
Support section for this camera that is located on the HP website at:
www.hp.com/photosmart.
I am trying to name a
group of images, but the
camera is not responding
Š
Š
Try using a different group name. Note that the camera does not accept group
names that begin with BR or TL (regardless of language).
Group names must be eight characters or less, and cannot contain spaces.
I am searching through
images by date, and have
selected the find dates,
but the camera is not
responding
Make sure that the From date is prior or equal to the To date.
I can’t get images to
display on my television
when I connect my
camera to it
Make sure that the video output format (NTSC or PAL) that you set in the Video
Preferences submenu of Playback mode is correct for the video input format of
your television. (See “Video Preferences Submenu” on page 77.)
I’m having trouble
JetSending an image to
my printer
Š
Be aware that it will take an average of 20 seconds to transfer an image from
the camera to a printer via JetSend.
Make sure that your printer is JetSend-capable.
Š
Š
Make sure that the camera’s infrared window is lined-up with the printer’s
infrared sensor, and that the camera and printer are about 10 inches apart.
I’m having trouble
sending images to
another camera
Š
Š
Make sure that the other camera is a Digita camera.
Make sure that the camera’s infrared window is lined-up with the other camera’s
infrared sensor, and that the cameras are about 10 inches apart.
Chapter 7: Troubleshooting
92
Troubleshooting Common Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Contacting HP Customer Care
HP Customer Care Online
Click your way to a great solution! The HP website, www.hp.com/photosmart, is a great place to
start for answers to questions about your HP products. You’ll get instant access to helpful tips and
tricks, downloadable drivers, and the latest product and software updates − 24 hours a day,
7 days a week.
HP Customer Care by Phone
If you encounter a problem with your camera that is not covered in this chapter, contact HP for help.
HP has Customer Support Centers worldwide, some of which are listed below.
Note: For a complete list of HP’s Customer
Support Centers worldwide, go to the HP
website, www.hp.com/photosmart, and click
the Assistance button on the navigation bar.
HP’s Customer Support Centers
Replace a + with your international telephone access code.
Canada: 905-206-4663
North America
Mexico - Mexico City: +52 58 9922
Mexico - Outside Mexico City: +01 800 472 6684
United States: 208-376-3686
Belgium - Dutch: +32 (0)2 626 8806
Europe
Belgium - French: +32 (0)2 626 8807
Denmark: +45 39 29 4099
Finland: +358 (0)203 47 288
France: +33 (0)1 43 62 34 34
Germany (24PF/min): +49 (0)180 52 58 143
Italy: +39 02 264 10350
Netherlands: +31 (0)20 606 8751
Norway: +47 22 11 6299
Spain: +34 902 321 123
Sweden: +46 (0)8 619 2170
United Kingdom: +44 (0)207 512 52 02
English language support from
other European countries:
+44 (0)171 512 52 02
Australia: +61 3 8877 8000
Asia/Pacific
Korea: +82 (2) 3270 0700
Singapore: +65 272 5300
Taiwan: +886 (2) 2717 0055
Chapter 7: Troubleshooting
93
Contacting HP Customer Care
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Using the Preferences Menu
Overview
Note: For reference information regarding the
options and soft keys in the Preferences menu,
see “Preferences Menu” starting on page 66.
Use the Preferences menu in Capture mode to change a variety of your camera’s general settings.
For example, with the Preferences menu options you can change the brightness of the camera’s
image LCD or the volume of the camera’s sounds, reformat the memory card in the camera, change
the date and time on the camera, or set the mode for connecting the camera to a computer.
This appendix covers the following topics:
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
“Accessing the Preferences Menu” on page 94
“Setting the Display” on page 95
“Controlling Camera Sounds” on page 97
“Formatting the Memory Card” on page 98
“Selecting the PC Connect Mode” on page 98
“Setting the Date and Time” on page 99
“Setting the Image Counter” on page 100
“Naming Your Camera” on page 101
“Resetting Camera Settings” on page 102
Figure 71: Preferences Menu
Accessing the Preferences Menu
To access the Preferences menu:
1 Set the camera mode dial to Capture mode
2 Power on the camera if you haven’t already.
.
3 Press the MENU button on the back of the camera. The Capture mode menus are displayed on
the image LCD.
4 Press the right arrow on the 4-way controller three times to move to the Preferences menu (see
Figure 71).
Note: All of the settings you make in the
Preferences menu are active from shot-to-shot;
they also remain set when you cycle the power
on the camera.
5 Press the down arrow on the 4-way controller to move the highlight to the menu option you
want to select.
6 Press the left (Edit, Format, or Reset) soft key to select the highlighted menu option.
Appendix A: Using the Preferences Menu
94
Accessing the Preferences Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Display
Figure 72: Display Submenu
Use the Display submenu to control the display on the camera’s image LCD.
Brightness Level
Use the Brightness Level setting to control the brightness of the display on the camera’s image LCD.
You can set the Brightness Level from 1 (dimmest) to 7 (brightest). The default value is 4.
To change the Brightness Level:
1 Press the down or up arrow on the 4-way controller, if needed, to highlight the Brightness
Level option.
2 Press the right or left arrow on the 4-way controller to scroll through the values until you see
the value you want.
3 Press the right (Exit) soft key to save the setting, exit the Display submenu, and return to the
Preferences menu.
Instant Review
The camera’s Instant Review feature allows you to see displayed on the image LCD either the One
Shot image, the final image of a Continuous image sequence, or the first image of a Timelapse
sequence you just captured. (See “Using Instant Review” on page 25 for more information.) The
default setting is that Instant Review is on for 3 seconds, and the maximum setting is that it is
on for 30 seconds, after you capture either a One Shot image or the final image in a Continuous or
Timelapse sequence.
To change the duration of the Instant Review period, or to turn Instant Review Off:
1 Press the down or up arrow on the 4-way controller to highlight the Instant Review option.
2 Press the right or left arrow on the 4-way controller to scroll through the values until you see
the value you want.
3 Press the right (Exit) soft key to save the setting, exit the Display submenu, and return to the
Preferences menu.
Appendix A: Using the Preferences Menu
95
Setting the Display
Download from Www.Somanuals.com. All Manuals Search And Download.
Live View
Note: The image LCD uses a lot of battery
power. If you are running your camera on
batteries rather than with the HP-approved AC
power adapter, you may want to limit your use
of the image LCD. In turn, you may want to
leave the Live View setting at its default Off
value to preserve battery power.
The Live View setting determines whether the live view of Capture Mode will automatically display
on the image LCD or not when you power on the camera and set the camera to Capture mode. The
default value for Live View is Off.
To change the setting so Live View is On (that it will always display on the image LCD when you
power on the camera and set the camera to Capture mode):
1 Press the down or up arrow on the 4-way controller to highlight the Live View option.
2 Press the right or left arrow on the 4-way controller to change the value to On.
3 Press the right (Exit) soft key to save the setting, exit the Display submenu, and return to the
Preferences menu.
Sleep Timeout
Note: For convenience as you learn to use your
camera’s features and menu options, you may
want to set the Sleep Timeout to the longest
interval (5 minutes). This will give you time to
consider a feature or menu option before the
camera goes into sleep mode and the image
LCD turns off.
Prior to the camera completely powering itself off due to inactivity, the camera goes to “sleep” by
turning off the image LCD and either turning off or slowing down other functions to conserve power.
Pressing any button on the camera (except the power switch) “wakes” the camera from sleep mode.
After the camera goes to sleep, it will power off after an additional 5 minutes of inactivity. Once the
camera completely powers itself off, you must use the power switch to power it on again.
The Sleep Timeout setting determines how quickly the camera goes into sleep mode when you are
not using the camera. The default value is 2 minutes.
To change the Sleep Timeout:
1 Press the down or up arrow on the 4-way controller to highlight the Sleep Timeout option.
2 Press the right or left arrow on the 4-way controller to scroll through the values until you see
the value you want.
3 Press the right (Exit) soft key to save the setting, exit the Display submenu, and return to the
Preferences menu.
Appendix A: Using the Preferences Menu
96
Setting the Display
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Camera Sounds
Figure 73: Sound Submenu
Use the Sound submenu to control the sounds used on your camera
Volume Level
The Volume Level setting allows you to determine the volume level of the sounds on your camera.
This includes both the system sounds (see the next subsection) and the sounds you attach to images
via the Sound Record button (see “Recording Sound” on page 26). You can set the Volume Level
from 1 (lowest/softest) to 7 (highest/loudest). The default value is 4.
To change the Volume Level:
1 Press the down or up arrow on the 4-way controller, if needed, to highlight the Volume
Level option.
2 Press the right or left arrow on the 4-way controller to scroll through the values until you see
the value you want.
3 Press the right (Exit) soft key to save the setting, exit the Sound submenu, and return to the
Preferences menu.
System Sounds
The Systems Sounds setting determines whether or not you will hear the camera’s system sounds,
such as shutter clicks, beeps, and so forth. The default value is On (that you will hear system sounds).
To change the setting so that System Sounds are turned Off:
1 Press the down or up arrow on the 4-way controller to highlight the System Sounds option.
2 Press the right or left arrow on the 4-way controller to change the value to Off.
3 Press the right (Exit) soft key to save the setting, exit the Sound submenu, and return to the
Preferences menu.
Appendix A: Using the Preferences Menu
97
Controlling Camera Sounds
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 74: Format Card Confirmation Screen
Formatting the Memory Card
Use the Format Card option to reformat the memory card in your camera. Reformatting will erase all
of the files (images) on the memory card, including protected files, folders, scripts, and so forth.
When you select the Format Card option by pressing the left (Format) soft key, you will see a
confirmation of your choice to format the memory card (see Figure 74). You can either press the
middle (Format) soft key to reformat the memory card, or press the right (Cancel) soft key to exit the
confirmation screen without reformatting the memory card and return to the Preferences menu.
Selecting the PC Connect Mode
Figure 75: PC Connect Mode Submenu
Use the PC Connect Mode submenu to specify how the camera will appear to your computer when
connected via the USB interface in PC Connect mode. You can then transfer images from your
camera to the computer via the USB interface. Table 63 explains the PC Connect Mode settings
and their functions. The currently selected mode is indicated by the checkmark to the left of it. The
default mode is Digita Device.
Table 63: PC Connect Mode Submenu
Setting
Function
USB Disk Drive
The camera is operated as a USB Mass Storage Device and appears as
a disk drive connected to the computer. You can copy images from
your camera to the computer as you would from another disk drive.
Use this setting to connect the camera to a Mac OS 8.6 or better
computer, or to a Windows Me, 98, or 2000 computer.
Digita Device
(default)
You can use software included with your computer or camera to
transfer images to the computer. Use this setting to connect the
camera to a Windows Me, 98, or 2000 computer.
Note: The USB Disk Drive mode will remain
set on your camera only if you power off the
camera by using the power switch. By powering
off the camera correctly, you will not have to
repeat these procedures when transferring
images to your computer in the future.
To change the PC Connect Mode:
1 Press the down or up arrow on the 4-way controller, if needed, to highlight the PC Connect
Mode you want.
2 Press the left (Select) soft key. The checkmark moves to the highlighted mode, and you return to
the Preferences menu. The camera is now set to the mode you just selected.
Appendix A: Using the Preferences Menu
98
Formatting the Memory Card
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 76: Set Date & Time Submenu
Setting the Date and Time
Use the Set Date & Time submenu to set the camera’s date and time. If you wish to change the
format that is used for the date and time, see the next subsection, “Format Dialog.”
Press the up or down arrow on the 4-way controller to scroll through the list of numbers on the left
side of the screen until you reach the number you want. The number in the currently highlighted
field in the center of the screen (such as the Month field, as shown in the example in Figure 76)
changes accordingly. When you have selected the number for the currently highlighted field, press
the right arrow on the 4-way controller to move to the next field. When you have finished setting the
date and time, press the right (Exit) soft key to save the date and time settings and return to the
Preferences menu.
Note: Press the up or down arrow on the 4-way
controller to scroll through the numbers on the
left side of the screen. Press the right or left
arrow to move between the date/time fields in
the center of the screen.
For example, to set the date to September 18, 2000 and the time to 2:51 pm, as shown in the example
in Figure 76:
1 Press the up or down arrow on the 4-way controller until you highlight 9, which sets the Month
field in the center of the screen to 9 (for the month of September).
2 Press the right arrow on the 4-way controller to move to the Day field.
3 Press the up or down arrow on the 4-way controller until you highlight 18.
4 Press the right arrow on the 4-way controller to move to the Year field.
5 Press the up or down arrow on the 4-way controller until you highlight 00.
6 Press the right arrow on the 4-way controller to move to the Hour field.
7 Press the up or down arrow on the 4-way controller until you highlight 02.
8 Press the right arrow on the 4-way controller to move to the Minutes field.
9 Press the up or down arrow on the 4-way controller until you highlight 51.
Since the am/pm setting is set to pm by default, simply leave the am/pm field as it is.
10Press the right (Exit) soft key to save the date and time settings and return to the
Preferences menu.
Appendix A: Using the Preferences Menu
99
Setting the Date and Time
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 77: Format Dialog
Format Dialog
When you press the left (Format) soft key in the Set Date & Time submenu, you see the Format
dialog, which allows you to select from a list of six, predefined date and time formats. There are three
formats which use the 24-hour clock format, and three formats which use the 12-hour clock format.
The default format for the date and time is MM/DD/YY 12 hr, which means the date is in the Month/
Day/Year format, and the time is in the 12-hour clock format.
For example, to set your camera to the MM/DD/YY 24 hour format (so that the date will be in the
Month/Day/Year format, and the time will be in the 24-hour clock format), follow these steps:
1 Press the left (Format) soft key in the Set Date & Time submenu to move to the Format dialog.
2 Press the up or down arrow on the 4-way controller to highlight the MM/DD/YY 24 hours
format in the Format dialog.
3 Press the left (Select) softkey, The checkmark moves to the highlighted date and time format,
and you return to the Set Date & Time submenu. The camera is now set to the date and time
format you just selected.
Setting the Image Counter
Figure 78: Image Counter Submenu
Use the Image Counter submenu to set how the image counter works. You can set the camera either
to restart numbering at 1 (one) each time you delete all the images from your camera, or to keep a
continuous count of images from the beginning of the camera’s use.
Table 64 explains the Image Counter settings and their functions. The currently selected setting is
indicated by the checkmark to the left of it. The default setting is Continuous Counter.
Table 64: Image Counter Submenu
Setting
Function
Reset When Empty
Each time you delete all of the images on your camera, the
counter restarts the first image captured at number 1.
Continuous Counter
(default)
The images are counted according to the history of the
camera’s use. For example: image #400 is the 400th
image to be captured with this camera.
Appendix A: Using the Preferences Menu
100
Setting the Image Counter
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the Image Counter setting:
Note: Once you have changed the Image
Counter setting, you must power the
camera off and then on again for the new
setting to take effect.
1 Press the down or up arrow on the 4-way controller, if needed, to highlight the Image Counter
setting you want.
2 Press the left (Select) soft key. The checkmark moves to the highlighted setting, and you return
to the Preferences menu.
3 Power the camera off and then on again for the new setting to take effect.
Figure 79: Camera Name Submenu
Naming Your Camera
Use the Camera Name submenu to enter a unique name for your camera. The camera name is used
to identify images in the Review mode when you have transmitted images from one camera to
another. (See “Transmitting Images Between Two Cameras” on page 48 for more information.) The
default camera name is Digita Camera.
For example, if you transmit images from camera B to camera A, camera B’s name appears in the
image information area of the Review mode screen on camera A when any images from camera B
are viewed on camera A. The camera name does not appear in the image information area when you
view images in Review mode on the camera you used to capture them.
Note: If a group name is applied to an image,
then the group name, rather than the camera
name, appears in the image information area of
the Review Mode screen.
To name your camera:
1 Press the left arrow on the 4-way controller to delete the letters of the default camera name.
2 Press the left (Character Set Icon) soft key to toggle through the four character sets (capital
letters, lowercase letters, numbers, or symbols) until you see the character set you want to use
displayed in the left soft key label area on the overlay bar.
3 Press the:
Š
Š
Up or down arrow on the 4-way controller to scroll through the list of characters on the left
side of the screen.
Right arrow on the 4-way controller to enter the selected character and advance the
insertion point in the center of the screen.
Š
Š
Left arrow on the 4-way controller to back up and delete a character.
Middle (Space) soft key to create a space between words in the camera name.
Note: Words wrap to the next line when they
4 Press the right (Exit) soft key to save the camera name you set and return to the
get too long.
Preferences menu.
Appendix A: Using the Preferences Menu
101
Naming Your Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Language
Figure 80: Language Submenu
English is set as the default language that is used on the camera. Use the Language submenu to
select a language from the list of installed languages.
To select a language:
1 Press the down or up arrow on the 4-way controller to highlight the language setting you want.
2 Press the left (Select) soft key. The checkmark moves to the highlighted language, and you
return to the Preferences menu. The selected language is now used on the camera.
Resetting Camera Settings
Figure 81: Reset Settings Confirmation Screen
Use the Reset Settings option to reset all of the camera settings (except for the Language, the Format
for the Set Date & Time, the PC Connect Mode, and the Video Preferences settings) to their defaults
in one step.
When you select the Reset Settings option by pressing the left (Reset) soft key, you will see a
confirmation of your choice to reset the camera settings (see Figure 81). You can either press the
middle (Reset) soft key to reset the settings, or press the right (Cancel) soft key to exit the
confirmation screen without resetting the settings, and return to the Preferences menu.
Appendix A: Using the Preferences Menu
102
Selecting a Language
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Camera and Accessories Information
Overview
This appendix covers the following topics:
Š
Š
Š
“Camera Specifications” on page 103
“Battery Life” on page 106
“HP Accessories for Powering the Camera” on page 107
Š
Š
“Using the HP AC Power Adapter” on page 108
“Using the HP NiMH Batteries and Recharger” on page 108
Š
“Storage Capacities of Memory Cards” on page 109
Camera Specifications
The following table lists the specifications for the HP 618 digital camera.
127.5mm (L) x 56.5mm (W) x 71.5mm (H)
(5.0 in. x 2.8 in. x 2.2 in.)
Camera Dimensions
300 g (10.6 oz.) without batteries and memory card
Weight
Zoom
Š
Š
Š
Š
3x optical, 2x digital zoom
5.2-16.5mm
34-108mm (35mm equivalent)
Digital zoom: shooting 1.2/1.5/2x, playback 2x
2.11 megapixel, 1/2.7” CCD
Sensor
30-bit (10 bits x 3 colors)
Color Depth
Color Control
Resolution
Full color, B&W (black and white), and Sepia
Š
Š
Full Size: 1600 x 1200 pixels
1/4: 800 x 600 pixels
Appendix B: Camera and Accessories Information
103
Camera Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
HP Imaging
Technology
Š
Š
Š
Custom ASIC for higher-performance image
processing
Image processing at 220,000,000 operations per
image in <1/2 second
Excellent enlargements at 8” x 10”
TM
Lens
Š
PENTAX power zoom (9 elements in 8 groups;
2 aspherical elements)
Š
Š
f/2.4-f/4.0
TTL (through the lens) auto focus
Image Type Settings
Š
Š
Š
One Shot
Continuous
Timelapse
+/-2.0 EV (Exposure Value) in .5 steps
Exposure
Compensation
1/1000 to 4 seconds
Shutter Speed
Sensitivity
Auto, Fixed (100 or 200 ISO speed)
TTL AE (auto exposure) metering with choice of Average,
Center-Weighted, or Spot
AE Metering
Viewfinder
Focus
Š
Separate zooming optical viewfinder with diopter
adjustment
Diopter adjustment from -3m to +1m
-1
-1
Š
Š
Field of view: 85% (at 3m or 9.8 ft.)
Š
Š
Š
Š
Š
TTL contrast-detection auto focus
Normal: 0.5m (1.64 ft.) to infinity
Macro: 0.1m (0.33 ft.) to 0.6m (1.97 ft.)
Infinity
Manual focus: 0.1m (0.33 ft.) to infinity
Flash
Š
Š
Built-in flash
Flash modes: Auto, Auto with Red-Eye Reduction,
Forced On, Forced On with Red-Eye Reduction,
Forced Off, Night, and Night with Red-Eye Reduction
Š
Effective range: 0.3m (0.98 ft.) - 5.4m (18 ft.) at 5.2mm
0.3m (0.98 ft.) - 3.7m (12 ft.) at 16.5 m
Appendix B: Camera and Accessories Information
104
Camera Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto, Landscape Program, Portrait Program, Action
Program, Aperture Priority, and Shutter Priority
Exposure Settings
Memory Card
TM
CompactFlash card (Type I or Type II, Power level 0)
shipped with camera
Timer
Š
Š
10-second delay
3-second delay with HP Remote Control (included)
Capture and play back sound with 45 seconds of recording
per image
Sound
Auto, Daylight, Tungsten, and Fluorescent
White Balance
Interfaces
Š
Š
Š
Š
USB connection to computers
HP JetSend and Digita infrared protocols
NTSC/PAL TV connections
Orientation sensor for automatic image rotation on
TV, computers, and cameras
Flashpoint Digita
Camera Operating
System
Image LCD
Š
2” low temperature poly-silicon TFT color LCD with
130,338 pixels
Š
Š
Adjustable brightness control
Displays thumbnails or full screen images
Image Control
Functions
Š
Š
Create slideshows of images
Send images via HP JetSend infrared technology to
JetSend-capable printers
Š
Š
Delete, protect, group, and categorize images
Watermark images with Date and Time, Text, or Logo
stamps
Displays battery status, flash mode, timer mode, auto
focus mode, and pictures remaining
Status LCD
Power
Š
Š
4 AA non-rechargeable batteries (included)
Optional: AC power adapter, or rechargeable NiMH
batteries and recharger
Appendix B: Camera and Accessories Information
105
Camera Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Life
Caution: Use only AA photo lithium, high drain
alkaline, or NiMH batteries in the HP 618 digital
camera. Do not mix batteries of different types.
Replace all 4 batteries at the same time; do not
replace the batteries individually. Always follow
all of the manufacturer’s instructions on the
battery package when handling, recharging, or
disposing of batteries.
The life of the batteries you use in your HP 618 camera depends on how you use the camera and on
the type of batteries you use. The following table provides estimates of battery life in a variety of
usage scenarios, including:
Š
Š
Š
Š
Š
Light use in Capture mode (image LCD off, no flash)
Moderate use in Capture mode (some use of image LCD and flash)
Leaving the camera in the idle state (image LCD off)
Using the camera in Review mode
Using the camera in live view of Capture mode (image LCD on)
Usage Scenario
Photo Lithium
NiMH
450
280
300
120
High Drain Alkaline
Light Capture Mode (Shots)
Moderate Capture Mode (Shots)
Idle State (Minutes)
810
500
600
220
120
230
150
300
90
Review Mode (Minutes)
Live View Capture Mode (Minutes)
85
45
To preserve battery life:
Š
Š
Š
Limit the use of the image LCD, or turn it off.
Limit the use of the flash, or turn it off.
Set the camera to take lower resolution and/or lower quality images. (See “File Settings Sub-
menu” on page 53.) Higher resolution and higher quality images take the camera longer to
process and compress.
Š
Š
Š
Limit operating the camera in cold temperature conditions. Operating the camera at colder
temperatures results in shorter battery life.
Always replace all 4 batteries at the same time. One low-charged battery will reduce battery life
for all batteries in the camera. This is true of both non-rechargeable and rechargeable batteries.
Use the HP-approved AC power adapter with your camera instead of batteries, or use recharge-
able batteries. The following section lists the HP-approved accessories you can use for powering
the camera.
Note: An AC power adapter provides power to
the camera − it does not recharge the batteries.
Appendix B: Camera and Accessories Information
106
Battery Life
Download from Www.Somanuals.com. All Manuals Search And Download.
HP Accessories for Powering the Camera
Caution: Using a non-HP AC power adapter
will void your camera’s warranty.
You can purchase any of the following accessories for powering the camera, as well as other
camera accessories, from the HP Shopping Village website at: www.hpshopping.com. (Click the
Digital Photography link on the main web page. Then click the Digital Photography Accessories
link on the second web page.)
This table of power accessories was current at the time this manual was published. For the most
up-to-date accessories list, refer to the HP Shopping Village website.
HP Model
Number
Accessory
Specifications
A610
HP AC Power Adapter
Input: 100-240 Volts AC
(See the next section, “Using
the HP AC Power Adapter”)
Output: 9 Volts DC, 1.33 Amps, 12 Watts
AA30
HP NiMH Battery Recharger
and 4 NiMH Batteries
(See “Using the HP NiMH
Batteries and Recharger” on
page 108)
HP NiMH Battery Recharger:
Recharging time is approximately 3.5 hours
Input: 9 Volts DC
Output (charging voltage): 8.4 Volts DC
HP NiMH Battery: 1.2 Volts DC (each)
Appendix B: Camera and Accessories Information
107
HP Accessories for Powering the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the HP AC Power Adapter
Figure 82: Connecting the HP AC Power Adapter’s
To connect the HP AC Power Adapter to the camera:
Cable to the Camera
1 Plug the AC power adapter into a power source, such as a wall outlet or power strip.
2 Open the door to the connector compartment on the camera. The connector compartment is
located on the far right side of the camera when you are looking at the front of the camera.
3 Connect the round end of the AC power adapter’s cable to the middle (power adapter)
connector in the camera (see Figure 82).
Note: Use the HP-approved AC power adapter
as the power source for the camera during
power-intensive operations, like when you are
using the camera’s image LCD for an extended
period of time.
Using the HP NiMH Batteries and Recharger
If you purchase the HP NiMH Battery Recharger, which includes 4 rechargeable NiMH batteries,
please note the following:
Š
Š
Š
Š
Š
Š
Š
Before you install the batteries in the HP 618 camera, you must charge all 4 NiMH batteries in
the HP NiMH Battery Recharger per the instructions that came with the Battery Recharger.
You must recharge all 4 NiMH batteries after fully draining them four times for the batteries to
reach their optimum capacity and performance.
Always recharge all 4 NiMH batteries at the same time. One low-charged battery will reduce the
battery life for all 4 batteries in the camera.
Do not store the batteries in the HP NiMH Battery Recharger for an extended period of time if it
is not necessary.
Do not over-charge the batteries. Disconnecting and reconnecting the HP NiMH Battery
Recharger to AC power frequently, without discharging the batteries, may cause over-charging.
Do not expose the NiMH batteries to heat. Permanent damage will result if the batteries are
exposed to temperatures above 110° F or 43° C. Always store the batteries in a cool location.
After long-term storage, recharge all 4 NiMH batteries before use. This is because the battery
cells discharge over time. (At room temperature, NiMH batteries generally discharge at about
1% per day.)
Appendix B: Camera and Accessories Information
108
HP Accessories for Powering the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage Capacities of Memory Cards
The following table lists the number of images an 8 MB, 16 MB, and 32 MB CompactFlash memory
card can store, depending on the JPEG quality level or TIFF setting at which the camera is set.
Note: To make the most memory available on a
memory card, reformat the card either on the
camera (using the Format Card option in the
Preferences menu − see page 68), or through
the computer (using USB Disk Drive mode,
reformat the card as you would a disk drive −
see page 69).
The number of images noted in this table are averages. In particular, the number of images per
memory card can vary based on the JPEG compressed file size of each image.
JPEG-Good
Quality Level
JPEG-Better
Quality Level
JPEG-Best
Quality Level
Resolution
TIFF
27
82
14
50
7
1
5
8 MB Card
16 MB Card
32 MB Card
Full Size
1/4
28
15
56
29
2
Full Size
1/4
165
113
101
60
204
57
30
115
10
5
Full Size
1/4
332
21
Appendix B: Camera and Accessories Information
109
Storage Capacities of Memory Cards
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Product Warranties
Limited Product Warranty
HP Product
Duration of Limited Warranty
HP 618 digital camera
1 year
1 year
CompactFlash memory card
HP Photo Imaging Software
90 Days
A. Extent of Limited Warranty
1 Hewlett-Packard (HP) warrants to the end-user customer that the HP products specified above
will be free from defects in material and workmanship for the duration specified above, which
duration begins on the date of purchase by the customer.
2 For software products, HP’s limited warranty applies only to a failure to execute programming
instructions. HP does not warrant that the operation of any product will be uninterrupted or
error free.
3 HP’s limited warranty covers only those defects which arise as a result of normal use of the
product, and does not cover any other problems, including those which arise as a result of:
a. Improper maintenance or modification;
b. Software, media, parts, or supplies not provided or supported by HP; or
c. Operation outside the product’s specification.
4 If HP receives, during the applicable warranty period, notice of a defect in any product which is
covered by HP’s warranty, HP shall either repair or replace the defective product, at HP’s option.
Appendix C: Product Warranties
110
Limited Product Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
5 If HP is unable to repair or replace, as applicable, a defective product which is covered by HP’s
warranty, HP shall, within a reasonable time after being notified of the defect, refund the
purchase price for the product.
6 HP shall have no obligation to repair, replace, or refund until the customer returns the defective
product to HP.
7 Any replacement product may be either new or like-new, provided that it has functionality at
least equal to that of the product being replaced.
8 HP products may contain remanufactured parts, components, or materials equivalent to new in
performance.
9 HP’s limited warranty is valid in any country where the covered HP product is distributed by HP.
Contracts for additional warranty services, such as on-site service, are available from any
authorized HP service facility in countries where the product is distributed by HP or by an
authorized importer.
B. Limitations of Warranty
1 TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY SUPPLIERS
MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR
IMPLIED, WITH RESPECT TO THE HP PRODUCTS, AND SPECIFICALLY DISCLAIM THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS
FOR A PARTICULAR PURPOSE.
C. Limitations of Liability
1 To the extent allowed by local law, the remedies provided in this Warranty Statement are the
customer’s sole and exclusive remedies.
2 TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET
FORTH IN THIS WARRANTY STATEMENT, IN NO EVENT SHALL HP OR ITS THIRD PARTY
SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND
WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Appendix C: Product Warranties
111
Limited Product Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Local Law
1 This Warranty Statement gives the customer specific legal rights. The customer may also have
other rights which vary from state to state in the United States, from province to province in
Canada, and from country to country elsewhere in the world.
2 To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement
shall be deemed modified to be consistent with such local law. Under such local law, certain
disclaimers and limitations of this Warranty Statement may not apply to the customer. For
example, some states in the United States, as well as some governments outside the United
States (including provinces in Canada), may:
a. Preclude the disclaimers and limitations in this Warranty Statement from limiting the statutory
rights of a consumer (e.g. the United Kingdom);
b. Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or
c. Grant the customer additional warranty rights, specify the duration of implied warranties
which the manufacturer cannot disclaim, or not allow limitations on the duration of implied
warranties.
3 FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND, THE TERMS IN THIS
WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE,
RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS
APPLICABLE TO THE SALE OF THE HP PRODUCTS TO SUCH CUSTOMERS.
Hewlett-Packard Year 2000 Warranty
For Consumer Products Distributed Through Authorized Resellers
Subject to all of the terms and limitations of the HP Limited Warranty Statement provided with this
HP Product, HP warrants that this HP Product will be able to accurately process date data (including,
but not limited to, calculating, comparing and sequencing) from, into, and between the twentieth
and twenty-first centuries, and the years 1999 and 2000, including leap year calculations, when
used in accordance with the Product documentation provided by HP (including any instructions for
installing patches or upgrades), provided that all other products (e.g. hardware, software, firmware)
used in combination with such HP Products(s) properly exchange date data with it. The duration of
the Year 2000 warranty extends through January 31, 2001.
Appendix C: Product Warranties
112
Hewlett-Packard Year 2000 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Product Safety and Regulatory Information
Safety Information
Using Batteries
The HP 618 digital camera comes with four non-rechargeable batteries. Do not attempt to recharge
these batteries. Do not mix old and new batteries or batteries of different types. Follow the battery
manufacturer’s safety instructions.
Disposing or Recycling of Batteries
Follow the battery manufacturer’s disposal and recycling instructions or the guidelines that are
recommended for your area. Do not incinerate or puncture batteries.
Using an AC Power Adapter
Use only the HP-approved AC power adapter. Failure to do so could cause damage or destroy the
camera and cause a fire. Use of a non-HP AC power adapter will also void your camera’s warranty.
Mercury Disclosure Statement
The image LCD of the HP 618 digital camera contains mercury. Disposal of this material may be
regulated due to environmental considerations. For disposal or recycling information, please
contact your local authorities or EIA: www.eiae.org.
Appendix D: Product Safety and Regulatory Information
113
Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Notices
U.S.A.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Canada
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus,
ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur les matériels brouilleurs: Appareils
Numériques, NMB-003 édictée par le ministre de la Communication.
Appendix D: Product Safety and Regulatory Information
114
Regulatory Notices
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
4-way controller
AC power adapter
A button on the back of the camera that has four directional arrows (up, down, right, and left) that you can
press to navigate the menus and images displayed in the image LCD.
Alternating Current power adapter. A power transformer that provides power to the digital camera and
preserves battery life. (Note that the AC power adapter does not recharge the batteries.)
Action Program exposure mode
The exposure mode setting in the Photo Assist menu that automatically optimizes the camera settings for
taking pictures of subjects in action, such as people playing sports. See also “exposure modes” on
page 116.
AE Metering
Automatic Exposure Metering. A setting in the Photo Assist menu that determines the area of the scene
used to set the exposure for a capturing an image.
The variable diameter opening in a camera lens that lets you control the intensity of light reaching the
film or CCD. A camera's aperture and shutter speed determine a photo’s exposure. Aperture diameters are
expressed in f-numbers − the larger the f-number, the smaller the lens opening. Dividing the focal length
of a lens by a specific f-number gives its aperture diameter. See also “CCD” on page 116,“f-number” on
page 117, and “focal length” on page 117.
Aperture Priority (Av) exposure mode
The exposure mode setting in the Photo Assist menu that lets you select an aperture, and the camera
automatically selects the shutter speed. See also “aperture” on page 115, “exposure modes” on page 116,
Auto exposure mode
Auto Focus mode
The exposure mode setting in the Photo Assist menu where all settings are at their defaults and cannot be
changed. See also “exposure modes” on page 116.
The default focus mode of the camera that automatically focuses the camera lens on a picture subject.
You can change the focus mode to Manual Focus in the Photo Assist menu. See also “Manual Focus mode”
on page 119.
auto focus range
This focus range is set by pressing a status LCD button on top of the camera and determines whether
the focus is set for infinity (picture of a distant subject), for macro (a close-up picture of a subject), or for
normal focus range.
auto focus range button
auto focus range icon
automatic exposure (AE)
A status LCD button on the top of the camera that you press to set the auto focus range.
An icon that appears in the status LCD and shows the camera’s current auto focus range.
The camera feature that calculates the necessary shutter speed, aperture, and ISO speed to get the best
possible exposure.
automatic shutoff
Av
A feature that automatically shuts off the camera after a certain period in order to preserve battery power.
See “Aperture Priority (Av) exposure mode” on page 115.
battery status
The amount of power that remains in the battery.
HP 618 Digital Camera User’s Guide
115
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
battery status icon
An icon that appears in the status LCD that indicates the amount of power left in the batteries.
The dial on the top of the camera that allows you to choose one of four operational modes (Capture,
Review, Playback, or PC Connect mode) for the camera.
Capture mode
CCD
An operational mode you use to take pictures (or “capture images”) with the camera. See also “camera
mode dial” on page 116.
Charge Coupled Device. An integrated micro-electronic, light-sensing device built into a digital camera.
The CCD image sensor is a silicon chip containing hundreds-of-thousands to a few million light-sensitive
cells that convert light to electricity. A CCD sensor, combined with the digital image processing capability,
is the functional equivalent of film in a digital camera.
CCD element
A single photosensitive area within a CCD array that is able to record a unique image detail. Also known
as a photosite. See also “CCD” on page 116.
Continuous image type
The image type setting on the camera that captures a series of images in rapid succession. This image type
is recommended for capturing action shots. See also “image type” on page 118.
default
Delete
A setting that the camera automatically uses until you change it.
A command associated with a soft key that is used to erase marked images or the current image from the
memory card.
digital zoom
Refers to digital cropping of the image, giving the appearance of greater zoom. After the optical zoom is
at its maximum setting, you can digitally zoom in three steps (1.2x, 1.5x, and 2.0x). The image LCD must be
on in order for the digital zoom to operate. Note that, in digital zoom mode, enlargement is accomplished
without changes in lens configuration. Since the lens is not involved in digital zoom, the changes appear
only in the image LCD; they are not evident though the viewfinder. See also “optical zoom” on page 120.
diopter control
DISPLAY button
A small dial next to the viewfinder that you can turn to adjust the focus of the picture subject in the view-
finder. Note that the diopter control has no effect on the image you capture, however.
A button on the back of the camera that turns the image LCD on and off in Capture mode, and turns the
overlay bars on and off in Playback mode. This button is inactive in Review and PC Connect modes. See
also “image LCD” on page 118.
exposure modes
The modes that you can select in the Photo Assist menu to set the camera exposure to properly capture
images, including: Auto, Landscape Program, Portrait Program, Action Program, Aperture Priority (Av),
and Shutter Priority (Tv). See also “Action Program exposure mode” on page 115, “Aperture Priority (Av)
exposure mode” on page 115, “Auto exposure mode” on page 115, “Landscape Program exposure mode”
on page 119, “Portrait Program exposure mode” on page 120, and “Shutter Priority (Tv) exposure mode” on
page 121.
file name
A set of letters, numbers, and symbols assigned to a file to distinguish it from other files on the computer
or in the camera.
HP 618 Digital Camera User’s Guide
116
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
file size
The number of bytes in a file. The file size for images saved on a digital camera is determined by the
resolution of the camera's CCD and the amount of image data compression. You can usually select the
amount of compression on the camera and again in the computer software that processes the images.
Note that if you compress an image on the camera and in the software, the compression is cumulative.
file type
firmware
The digital format in which a file is saved. Computer programs can insert or import files that were saved in
a file type that the program supports. Common file types for images include JPEG (Joint Photo Expert
Group format) and TIFF (Tagged Image File Format). See also “JPEG” on page 118 and “TIFF” on page 122.
The low-level software that runs in a digital camera and controls the functionality and user interface on
the camera.
firmware update
flash
The process of updating to a new firmware version on the digital camera.
A brief, intense burst of light from an electronic flash unit on a camera. Use flash when the lighting in a
scene is inadequate for taking pictures.
flash mode
This mode is set by pressing a status LCD button on top of the camera and determines how the flash will
operate.
flash mode button
flash mode icon(s)
f-number
A status LCD button on the top of the camera that you press to set the flash mode.
An icon or set of icons in the status LCD that shows the current flash mode.
The f-number (also called the f-stop) is related to the diameter of the lens aperture − dividing the focal
length of the lens by the f-number specifies the aperture diameter. The f-number is used in conjunction
with the shutter speed to set the exposure. A standard set of f-numbers is commonly used in camera
lenses. A lower f-number, such as f/2.8, indicates a larger aperture, which lets in more light. A higher
f-number, such as f/16, indicates a smaller aperture, which lets in less light. See also “aperture” on page 115
and “focal length” on page 117.
focal length
focus
The distance between the center of the lens (more precisely, its rear nodal point) and the CCD sensor in
digital cameras when the lens is focused on infinity. The focal length is specified in millimeters.
Refers to adjusting the lens in a digital camera in order to place a clear image on the plane of the CCD
sensor.
focus mode
focus range
See “Auto Focus mode” on page 115 and “Manual Focus mode” on page 119.
See “auto focus range” on page 115.
four-way controller
f-stop
See “4-way controller” on page 115.
See “f-number” on page 117.
grouped images
A number of images that are bundled together. You can group images in the Edit menu of Review mode.
Grouped images appear in a folder on the memory card when the camera is connected to a computer.
HP 618 Digital Camera User’s Guide
117
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
HP Imaging Technology
State-of-the-art image processing technology developed by HP that captures sharp, colorful images with
exceptional levels of detail, individually optimizes every image, and produces great detail in highlights
and shadows.
icon
image
A picture on an LCD, computer screen, or printed on a device that represents a specific setting. Icons on a
digital camera’s LCD communicate the camera's status, such as particular settings that have been made
for taking a picture. See also “LCD” on page 119.
The electronic version of a photograph as it is stored in a digital camera, computer, or other electronic
medium. Digital cameras capture and store an image when you take a picture. See also “picture” on
page 120 and “photo” on page 120.
image LCD
The Liquid Crystal Display on the back of the camera. The image LCD and its accompanying
buttons and soft keys let you view and work with images on the camera. See also “DISPLAY button” on
image size
See “size” on page 122.
The type of image the camera will capture. There are three image types: One Shot, Continuous, and
Timelapse. You can change the image type by pressing the left soft key while in Capture mode. See also
“Continuous image type” on page 116, “One Shot image type” on page 119, and “Timelapse image type”
on page 123.
image type icon
An icon that appears on the left side of the bottom overlay bar in the image LCD and shows the image
type setting in Capture mode.
image type soft key
infrared
The left soft key on the back of the camera that you press to set the image type in Capture mode.
A type of connection that allows images to be transmitted between the camera and another device (such
as a printer) without connecting wires when the infrared window on the camera is lined-up with an infrared
sensor on the other device. See also “JetSend” on page 118.
infrared window
The window on the front of the camera that uses the HP JetSend infrared technology. See also “JetSend”
on page 118.
interval
The time between images being captured for the Timelapse image type.
ISO number
The International Organization for Standardization rating for film or CCD sensitivity. A higher ISO number
means less light is needed to take a picture. CCDs in digital cameras are rated in terms of ISO numbers.
ISO is not an acronym; it is derived from the Greek “isos”, meaning equal. See also “CCD” on page 116.
JetSend
JPEG
A protocol developed by HP for sending image data from one device to another without using any
connecting cables between the devices. JetSend uses infrared technology to transmit images from the
camera to a printer for printing.
A compressed image file format developed by the Joint Photo Expert Group. Its strengths are very small
file sizes and fast display rates. (It is 7 to 10 times faster than some other image file formats.) See also “file
type” on page 117 and “TIFF” on page 122.
HP 618 Digital Camera User’s Guide
118
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
Landscape Program exposure mode
LCD
The exposure mode setting in the Photo Assist menu that automatically optimizes the camera settings for
taking pictures of distant subjects, such as landscape scenes. See also “exposure modes” on page 116.
Liquid Crystal Display. A display technology that is used on digital cameras. An LCD displays numeric
characters and/or icons to communicate the camera's status, such as the particular settings that you have
made for taking a picture. See also “image LCD” on page 118 and “status LCD” on page 122.
LED
lens
Light Emitting Diode. An indicator on the camera that shows the status of some feature or process by
either lighting solid or blinking on and off.
One or more pieces of optical glass or similar material designed to collect and focus rays of light to form
a sharp image on the film (for traditional film cameras) or the CCD (for digital cameras). Lenses are rated
specified in millimeters). See also “aperture” on page 115, “CCD” on page 116, and “f-number” on page 117.
live view
Using the image LCD on the back of the camera to view the picture subject before taking the picture.
Manual Focus mode
The focus mode that you set in the Photo Assist menu that lets you control the focus distance of the lens
when capturing images. See also “Auto Focus mode” on page 115.
marking
Specifying an image or several images to which you will then apply a single action.
memory card
A small removable, non-volatile storage medium for digital information that acts as the film in a digital
camera. The memory card stores the images so you can process or view them at a later time. Make sure
the camera is powered off any time you remove the memory card from the camera.
memory card access LED
memory card door
MENU button
The LED that blinks to indicate the memory card is in use. See also “LED” on page 119.
The door on the side of the camera that you open to access the memory card in the camera.
A button on the back of the camera that lets you view menus on the image LCD in the Capture, Review, or
Playback mode. See also “modes” on page 119.
menus
These appear on the image LCD when you press the MENU button in the Capture, Review, or Playback
mode and are used to choose and set camera settings.
microphone
mode dial
modes
The audio device on the front of the camera used to record sound that is then attached to an image.
See “camera mode dial” on page 116.
These set the way the camera functions. There are four operational modes: Capture, Review, Playback, and
PC Connect.
NTSC connection
National Television Standards Committee connection. The video (TV) connection standard used in the
United States and Japan.
One Shot image type
The image type setting on the camera that captures one image at a time. See also “image type” on
page 118.
HP 618 Digital Camera User’s Guide
119
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
optical resolution
optical zoom
The true resolution of an imaging device, and the resolution at which the device captures images. See also
“resolution” on page 121.
The process of changing the field of view and magnification of the lens by moving different lens groups
within the lens to change its overall focal length. See also “digital zoom” on page 116.
orientation sensor
An electro-mechanical device in the camera that determines whether the camera is being held
horizontally or vertically, and which side is up. The camera uses the data from this sensor to make sure the
image is displayed right side up in the image LCD, regardless of the camera position when the image was
captured.
overlay bars
PAL connection
Opaque or translucent information bars that appear on the image LCD.
Phase Alternating Line connection. The video (TV) connection used in Europe.
PC Connect mode
An operational mode you use to control the camera via a computer (PC or Macintosh) that you have
connected to the camera. You use this mode to download images from the camera to the computer. See
also “camera mode dial” on page 116.
PCMCIA adapter
Personal Computer Manufacturers Common Interface Agreement adapter. A small, electronic card that
fits in a PCMCIA slot and controls or communicates with an external device. For digital cameras, this is
usually an adapter into which you can plug the memory card from the camera for transferring images to
your computer.
PCMCIA slot
photo
The slot in a computer that holds a PCMCIA card. A PCMCIA slot is usually found in laptop computers.
The printed version of an image. See also “image” on page 118 and “picture” on page 120.
See “image type” on page 118.
photo type
photosite
picture
See “CCD element” on page 116.
Picture refers to the original composition when capturing an image with a digital camera. See also “image”
on page 118.
pictures remaining indicator
pixel
A numeric indicator in the status LCD that shows how many more images you can capture and store on
the memory card.
Picture element. The smallest element that can be assigned an independent color and intensity and
displayed on a computer monitor screen or on an LCD. A pixel is a dot with either a square or rectangular
shape. Digital images displayed on a monitor screen or LCD are composed of thousands of pixels.
Playback mode
An operational mode you can use to view the captured images on the camera’s image LCD. You can view
images as full-sized stills, play back timelapse and grouped photo sequences, and create slideshows of
the images. See also “camera mode dial” on page 116 and“slideshow” on page 122.
Portrait Program exposure mode
The exposure mode setting in the Photo Assist menu that automatically optimizes the camera settings for
portrait photography. See also “exposure modes” on page 116.
HP 618 Digital Camera User’s Guide
120
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
power switch
preview
The switch on the camera that turns it on or off.
See “live view” on page 119.
protect
Marking an image so that no one can delete it.
See “sound record button” on page 122.
record button
red-eye
Refers to a human’s or animal’s eyes that appear red in captured images, which is caused by using the
flash on a camera.
red-eye reduction
reformat
A flash mode you can use to minimize red-eye in captured images of humans or animals. The camera
does this by flashing twice. See also “flash mode” on page 117.
Reformatting completely erases the memory card, including all images (protected and unprotected) and
all other files.
remote control
A device used to trigger the shutter from a location that is remote from the camera, such as when you want
to take a self portrait or want to be in a group picture. When you press the HP Remote Control’s trigger, the
page 123.
resolution
The measure of how many pixels are displayed or printed. The resolution of a CCD is determined by
multiplying the X pixels by the Y pixels. The greater the resolution, the greater the amount of detail
visible, and the larger the file size. The final output device (computer monitor or printer) on which an
image is displayed or printed determines the actual resolution you will see. For example, if you capture an
image at 1600 x 1200 pixels, and your printer is capable of printing at only 300 dpi (dots per inch), the
printed image will be no more than 300 dpi.
review
The process of using the image LCD to view the images stored on the memory card.
Review mode
An operational mode you can use to sort and edit the captured images on the camera. See also “camera
mode dial” on page 116.
self-timer
See “timer” on page 123.
Send button
A button on the back of the camera you can use to send images from the camera to a printer via the
HP JetSend infrared technology. The Send button is active in the Capture, Review, and Playback modes.
See also “JetSend” on page 118.
shutter
A set of surfaces that block light from the film or CCD in a camera. When the shutter is released, the
surfaces open for a predefined time, admitting a measured amount of light. See also “CCD” on page 116.
Shutter Priority (Tv) exposure mode
An exposure mode setting in the Photo Assist menu that lets you select a shutter speed, and the
camera automatically selects the aperture setting. See also “aperture” on page 115, “Aperture Priority (Av)
exposure mode” on page 115, “shutter” on page 121, and “shutter speed” on page 122.
HP 618 Digital Camera User’s Guide
121
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
A two-stage button on the top of the camera that is enabled in Capture mode. Pressing this button
halfway down allows the camera to make various settings, such as Auto Focus Lock. Pressing this button
all the way down in one motion allows the camera to make various settings and to capture one or more
images, depending on the image type selected. The camera makes a shutter sound as each image
is captured.
shutter speed
size
The amount of time the shutter stays open when you press the shutter release button.
The actual height and width of an image when you have saved the image. You will not see the image size
change in the image LCD after you save it.
sleep mode
A feature that conserves battery power by automatically shutting off the image LCD after a period of time
(default 2 minutes) that the camera hasn’t been used.
slideshow
soft keys
The sequential viewing of images stored on the camera's memory card in Playback mode.
Three buttons that are located just below the image LCD on the back of the camera. The soft keys let you
work with images and menus on the image LCD. See also “image LCD” on page 118.
sound record button
speaker
A button on the back of the camera that allows you to record sound that is then attached to an image.
The audio device on the back of the camera that allows you to hear the camera’s system sounds (shutter
clicks, beeps, and so forth). It also allows you to hear sound that was previously recorded and attached to
an image via the camera’s sound record button.
status LCD
The Liquid Crystal Display on the top of the camera that uses a combination of numeric characters and
icons to communicate the camera's status, such as particular camera settings.
status LCD buttons
The three buttons beneath the status LCD that you can press to set the flash mode, timer mode, and auto
focus range. See also “auto focus range button” on page 115, “flash mode button” on page 117, and “timer
mode button” on page 123.
strobe
subject
See “flash” on page 117.
The main object, person, or scene that you want to capture with your camera.
telephoto
A lens that has a longer focal length and narrower field of view (includes less subject area) than a normal
lens. A telephoto lens makes a subject appear larger and/or closer than does a normal lens at the same
camera-to-subject distance. See also “wide angle” on page 124.
thumbnail
TIFF
A miniature of the original image that is large enough to allow you to identify the image, but is small
enough to allow you to see multiple images in a single software window. Thumbnails are used to display
on-screen images of the contents of a digital camera’s memory card.
Tagged Image File Format. A bitmapped file format for images. TIFF does not compress the image. TIFF
files are supported by many programs and can also be used on many types of computers. See also “file
type” on page 117 and “JPEG” on page 118.
HP 618 Digital Camera User’s Guide
122
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
Timelapse image type
timer
The image type setting on the camera that captures a slow process with a series of images. See also
“image type” on page 118.
A device that lets you take a self portrait or be in a group picture. When you press the shutter release
button or the HP Remote Control’s trigger, the image capture is delayed by a length of time specified by
the timer delay. See also “timer delay.”
timer delay
timer LED
The amount of time the camera waits to take the picture when using the timer.
The Light Emitting Diode on the front of the camera that flashes to indicate the countdown of the timer
delay when you have set the timer and then pressed the shutter release button or the HP Remote
Control’s trigger.
timer mode
This mode is set by pressing a status LCD button on top of the camera and determines how the shutter
release button will be triggered.
timer mode button
timer mode icon(s)
Tv
The status LCD button on the top of the camera that you press to set the timer mode.
An icon or set of icons that appears in the status LCD and shows the current timer mode.
See “Shutter Priority (Tv) exposure mode” on page 121.
TV (video) connection
The connector into which you plug the video cable to connect the camera to a television (TV). See also
“NTSC connection” on page 119 and “PAL connection” on page 120.
unload
The process of copying images from the memory card directly to the computer.
unmark
unprotect
The process of deselecting images in the camera that have previously been marked.
The process of removing the protection on images in the camera so that they can be deleted.
Universal Serial Bus. An interface for connecting peripherals, such as digital cameras, to a computer.
USB
USB Mass Storage Device Class
A Microsoft Windows device class that lets the operating system display the files in a camera as though
they are stored on a separate, additional computer device similar to a disk drive.
video cable
video input connector
viewfinder
The wire that can be used to connect the camera to a television.
The connector on a television into which you plug the video cable.
The window on the back of the camera through which you look to frame the subject that will be recorded
when you capture an image.
wake up
The process of bringing the camera out of sleep mode.
HP 618 Digital Camera User’s Guide
123
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance
wide angle
zoom
A setting in the Photo Assist menu that is used to correct the color applied to a captured image under
different lighting conditions in order to make the white areas in the image appear white without any color
cast.
A lens that has a shorter focal length and a wider field of view (including more subject area) than a normal
lens. A wide angle lens makes a subject appear smaller than does a normal lens at the same camera-to-
subject distance. See also “telephoto” on page 122.
To enlarge the subject by changing the field of view and magnification of the lens by using the zoom
lever. Once the camera lens is at maximum optical zoom, you can switch into digital zoom mode, if the
image LCD is on. See also “optical zoom” on page 120 and “digital zoom” on page 116.
zoom lever
A lever on the back of the camera that moves the lens continuously between telephoto and wide angle
focal lengths. The zoom lever also controls the digital zoom. See also “digital zoom” on page 116, “focal
length” on page 117, “telephoto” on page 122, and “wide angle” on page 124.
HP 618 Digital Camera User’s Guide
124
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
transferring images to computer 38
using Focus Lock 18
Camera Name submenu 72, 101
Camera-Camera menu option 84
Camera-Printer menu option 85
Capture mode menus
Numerics
4-way controller, using 15
A
AC power adapter
purchasing from HP 107
safety information 113
using 108
accessing 52
Image Stamp 62
Photo Assist 55
Preferences 66, 94
using 15
AE Metering submenu 60
Aperture indicator 12
Auto focus range
Capture mode, setting the camera to 8
Capture Settings menu 52
Categories submenu 80
Categorizing images 35
Collapsing Timelapse or grouped images 31
Connecting
camera to television 50
Continuous images, shooting 20
Customer Support Centers, HP 93
D
Macro and Infinity indicators 13
setting 11
B
Batteries
purchasing from HP 107
safety information 113
using rechargeable 108
Battery life 106
Buttons
4-way controller 15
auto focus range 11
flash mode 10
timer mode 11
C
Date and time, setting 70, 99
Date/Time Stamp submenu 62
Delete menu option 78
Deleting images 32
Dialogs
Camera
Format for Set Date & Time 70, 100
Logo Files 65
Digital Print Order Form (DPOF) 81
Digital zoom
indicator on image LCD 13
Digital zoom, using 22
Diopter control, using 22
Display submenu 67, 95
Disposing of batteries 113
Dissolving image groups 33
DPOF (Digital Print Order Form) 81
AC power adapter 107
accessories 107
battery life 106
connecting television to 50
firmware updates 7
HP Year 2000 warranty 112
limited product warranty 110
NiMH batteries and recharger 107
Preferences menu 94
Reset Settings menu option 73, 102
specifications 103
Status screen, viewing 14
HP 618 Digital Camera User’s Guide
125
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Timelapse images 21
viewing Timelapse in Playback mode 28
Images
E
Edit menu 78
Erase Order menu option 83
EV Compensation submenu 57
Expanding Timelapse or grouped images 31
Exposure mode indicator 12
Exposure Mode submenu 56
Find By Date submenu 87
Find menu 86
Firmware updates 7
Focus Lock, using 18
Focus Mode submenu 59
Focus range, auto 11
Focus, Manual 12
categorizing 35
collapsing Timelapse or grouped 31
Continuous 20
creating slideshows 29
deleting 32
dissolving groups 33
grouping 33, 79
JetSending to printer 46
marking 31
One Shot 19
protecting 34
searching for 36
selecting in Review mode 30
sharing 38
Timelapse 21
transferring to computer 38
unmarking 31
Format Card menu option 68, 98
Format dialog, Set Date & Time submenu 70, 100
G
Group Name submenu 79
Grouped images
unprotecting 34
viewing full screen 28
viewing on television 51
viewing Timelapse and grouped 28
Infinity auto focus range indicator 13
Instant Review, using 25
ISO Speed submenu 61
J
expanding or collapsing 31
viewing 28
Grouping images 33, 79
H
HP Customer Care 93
HP JetSend 46
HP Shopping Village website 107
HP Year 2000 warranty 112
I
Image Counter submenu 71, 100
Image LCD, using 12
Image Stamp menu 62
Image types
Jetsending images to printer 46
L
Language submenu 73, 102
LCDs
image LCD 12
status LCD 9
LEDs
memory card access LED 24
timer LED 24
understanding 23
viewfinder LED 23
Light Emitting Diodes (LEDs) 23
Continuous images 20
One Shot images 19
setting 13
soft key 13
HP 618 Digital Camera User’s Guide
126
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited product warranty 110
Logo Files dialog 65
Logo Stamp submenu 65
M
Macro auto focus range indicator 13
Manual focus 12
Marking images 31
Memory card access LED 24
Menus
Overview
camera introduction 5
camera troubleshooting 88
menu and soft key reference 52
preparing to take pictures 8
reviewing images 27
sharing images 38
taking pictures 16
PC Connect Mode submenu 38, 69, 98
Photo Assist menu 55
Pictures
advanced picture taking 17
point-and-shoot picture taking 16
Play Settings menu 74
Playback mode
Capture mode 15, 52
Capture Settings 52
Edit 78
Find 86
Play Settings 74
Playback mode 74
Preferences 66, 94
Print Order Form 81
Review mode 78
Transmit 84
accessing 27
creating a slideshow 29
viewing full screen images 28
viewing Timelapse and grouped images 28
zooming in on images 28
Playback mode menu
Mercury disclosure statement 113
Modes
accessing 74
Play Settings 74
Capture 8, 52
Flash 10
Playback 27, 74
Review 27, 30, 78
Timer 11
Playback Rate submenu 76
Point-and-shoot pictures 16
Preferences menu 66, 94
Print Order Form menu 81
Printer, JetSending images to 46
Problems, troubleshooting 88
Product safety information 113
Product warranty, limited 110
Protect menu option 79
Protecting images 34
N
NiMH batteries and recharger
purchasing from HP 107
using 108
O
R
One Shot images, shooting 19
Output format, video 50
Overlay bars, using 12, 14
Overlay soft key 12
Rechargers, battery
purchasing from HP 107
using 108
Recording sound 26
Recycling batteries 113
Regulatory notices (USA & Canada) 114
Overlay soft key, using 14
HP 618 Digital Camera User’s Guide
127
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing grouping on images 33
Reset Settings menu option 73, 102
Review mode
Camera-Printer option 85
Capture Settings menu 52
Categories submenu 80
Date/Time Stamp submenu 63
Delete option 78
Display submenu 67
Erase Order option 83
Exposure submenu 57
File Settings submenu 54
Find By Category submenu 87
Find By Date submenu 87
Find menu 86
accessing 27, 30
categorizing images 35
dissolving image groups 33
marking images 31
protecting images 34
searching for images 36
selecting images 30
Focus submenu 59
unmarking images 31
unprotecting images 34
Review mode menus
Format Card option 68
Format List dialog 70
Group Name submenu 79
Image Counter submenu 71
Image Stamp menu 62
image types 13
accessing 78
Edit 78
Find 86
Print Order Form 81
Transmit 84
ISO Speed submenu 61
labels 12
Reviewing images 27
S
Safety
Language submenu 73
Logo Files dialog 65
Logo Stamp submenu 65
Overlay 12, 14
AC power adapter 113
batteries 113
PC Connect mode submenu 69
Photo Assist menu 55
Play Settings menu 74
Playback Rate submenu 76
Preferences menu 66
Print Order Form menu 81
Protect option 80
Reset Settings option 73
Set Date & Time submenu 70
Slideshow submenu 75
Sound submenu 68
mercury disclosure statement 113
Searching for images 36
Selecting images in Review mode 30
Set Date & Time submenu 70, 99
Setting the format for date and time 70, 100
Sharing images 38
Shutter Speed indicator 12
Slideshow submenu 75
Slideshows, creating 29
Soft keys
Status 14
Add to Order submenu 82
AE Metering submenu 60
Camera Name submenu 72
Camera-Camera option 84
Text Stamp submenu 64
Timelapse Settings submenu 54
using 12
HP 618 Digital Camera User’s Guide
128
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Preferences submenu 77
View Order option 83
White Balance submenu 58
Sound submenu 68, 97
Sound, recording 26
Specifications, camera 103
Status LCD
T
Technical support, HP 93
Television, connecting to camera 50
Text message area, understanding 12
Text Stamp submenu 64
Time and date, setting 70, 99
Timelapse images
expanding or collapsing 31
viewing 28
using the buttons 9
Status screen, viewing 14
Status soft key 14
Submenus
Timelapse Settings submenu 54
Timer LED 24
Timer mode, setting 11
Transferring images to a computer 38
Transmit menu 84
Troubleshooting common problems 88
U
Unmarking images 31
Unprotecting images 34
Updates to firmware 7
User’s Guide
Add to Order 82
AE Metering 60
Camera Name 72, 101
Categories 80
Date/Time Stamp 62
Display 67, 95
EV Compensation 57
Exposure Mode 56
File Settings 53
Find By Category 87
Find By Date 87
Focus Mode 59
Group Name 79
Image Counter 71, 100
ISO Speed 61
Language 73, 102
Logo Stamp 65
PC Connect Mode 38, 69, 98
Playback Rate 76
how to use it 7
related information 7
what’s in it 6
V
Video output format, selecting 50
Video Preferences submenu 77
View Order menu option 83
Viewfinder LED 23
Viewing images on television 51
W
Warranty
HP Year 2000 112
limited camera 110
Websites
Set Date & Time 70, 99
Slideshow 75
Sound 68, 97
HP Customer Care 93
HP Shopping Village 107
White Balance submenu 58
Z
Text Stamp 64
Timelapse Settings 54
Video Preferences 77
White Balance 58
Support, HP customer 93
Zoom lever, using 22
HP 618 Digital Camera User’s Guide
129
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
|