Gyration Personal Computer GyroRemote and Mobile RF Keyboard User Manual

GyroRemote  
and Mobile  
RF Keyboard  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Specifications  
Spec  
GyroRemote  
Keyboard  
RF Receiver  
System Require-  
ments  
T
T
Full functionality on IBM compatible PCs running Windows  
2000, ME, XP or higher  
Limited functionality on MAC OS 8.0 and higher and  
Windows 98*  
T
T
T
Available USB port  
CD ROM drive (for GyroTools installation)  
Microsoft or Mac compatible mouse driver  
Size  
7.75”L x 2”W x  
1.5”H (19.7cm x  
5.1cm x 3.8cm)  
12.5”L x 6”W x 1”H  
(32cm x 15cm x  
4cm)  
5”L x 4”W x 2”H  
(13cm x 10cm x  
5cm)  
Weight  
6 ounces (186g)  
21 ounces (653g)  
includes batteries  
and keyboard cover  
4 ounces (124g)  
Operating  
Range  
Up to 100 feet (30.5m) typical with no  
line-of-sight requirement**  
N/A  
N/A  
N/A  
Radio  
49 MHz (U.S.) with 8 channels and 65,000  
security addresses**  
Batteries  
4 AAA for up to 4  
months of typical  
presentation use  
4 AAA for up to 6  
months of typical  
presentation use  
Connector  
N/A  
N/A  
USB with 5’ (1.5m)  
cable  
Operating Temp  
Storage Temp  
+10 to 40 C (+50 to +104 F)  
-30 to +70 C (-86 to +158 F)  
*GyroRemote: GyroTools software is Windows only. GyroRemote tool buttons not  
supported by Macintosh. Cursor control and left mouse button fully functional on  
Macintosh.  
Keyboard: Internet and Multimedia hot keys not supported by Macintosh or  
Windows 98. Standard keyboard keys are functional.  
**See inside back cover for international specifications.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. OPTIONAL: To exit “Learn Mode,” press the LEARN button on the  
Receiver for 2 seconds. Otherwise, after five minutes, Learn Mode  
will automatically time out.  
If more than one Gyration remote and/or keyboard is being installed on the  
system, place the Receiver into Learn Mode (step 4 above) only once, then  
Teach” each device before exiting Learn Mode. Do not push the Learn  
button on the receiver for each device to be added. (Also see “Installing 3 or  
More Devices” on page 13.)  
When the Receiver is put into Learn Mode, it erases its memory of learned  
devices and looks for new devices. Therefore, when adding a new device to a  
system it is necessary to put the Receiver into Learn Mode then Teach all  
devices that will be used on the system.  
Note: After the Teach/Learn sequence is performed, the Receiver and the device will  
remain synchronized after powering down and changing channels. It is only necessary  
to perform the Teach/Learn sequence when setting a device up for the first time or  
when adding additional devices to the system.  
GyroTools Software  
GyroTools software is a suite of professional presentation tools that enhance  
the functionality of GyroRemote. Assign your favorite tools to buttons 1-4 on  
GyroRemote and put advanced presentation techniques at your fingertips.  
To install the GyroTools software, insert the GyroTools disk into your CD  
drive and follow the on-screen instructions. Once GyroTools is installed, you  
can view complete operating instructions by accessing the on-line help  
documentation.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Determine Which Channel GyroRemote is Using  
GyroRemote has eight individual channels available to it. To determine which  
channel a device is currently using:  
1. Press and quickly release the CHANNEL button on the GyroRemote  
handset. Count the number of times the green LED light on the top  
of the handset flashes. The number of flashes indicates the channel  
the handset is using.  
Note: If GyroRemote’s channel is changed when the computer is powered down or the  
receiver is not connected, the devices will become unsynchronized. When the system is  
running, click and release the channel button as described above to initiate a “channel  
confirm” operation. GyroRemote broadcasts a message across all eight channels that  
informs the receiver what channel it is currently operating on. The receiver then  
automatically restores synchronization.  
To Change the Channel GyroRemote is Using  
When two devices are being used in the same proximity, each device should  
be set to operate on a unique channel.  
To change the channel:  
1. Press and hold the CHANNEL button on the GyroRemote handset for  
2 seconds. When you release the button, GyroRemote will change  
to the next channel and the green LED will flash. The number of  
times the green LED flashes indicates the new channel the handset  
is using.  
If a Teach/Learn sequence has already been performed, it will not be  
necessary to re-synchronize the devices after a channel change.  
Tip: If you are installing three or more devices on a single receiver, see “Installing 3 or  
More Devices” on page 13.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using GyroRemote  
GyroRemote provides great flexibility in how  
you control your computer. GyroRemote has  
no line-of-sight requirements. This means it’s  
not necessary to point the device at the  
computer, receiver, or TV screen. Find a  
comfortable, relaxed position and move the  
cursor with easy wrist movements.  
The following instructions assume you have  
already set up and synchronized GyroRemote  
and the Receiver (see set up steps above).  
1. Hold GyroRemote in a comfortable,  
relaxed position with your index fin-  
ger on the ACTIVATION TRIGGER and your thumb on the SELECT  
buttons (see illustration above).  
2. Press and hold the ACTIVATION TRIGGER with your index finger.  
While holding the ACTIVATION TRIGGER, flex your wrist up, down,  
sideways, in a manner similar to using a flashlight. The mouse cur-  
sor tracks the motions of your hand.  
Note: It is not necessary to point GyroRemote at the screen so be sure to  
place your hand in a relaxed, comfortable position in your lap or by your side.  
3. Use your thumb to press the left/right SELECT buttons. These  
buttons serve the same functions as the left/right mouse button of  
a standard computer mouse.  
4. Double-click the ACTIVATION TRIGGER to keep the cursor continu-  
ously active. To stop the cursor, click the ACTIVATION TRIGGER  
once. Another way to keep the cursor continuously active is to click  
the crescent shaped GYRO LOCK button.  
GyroRemote uses standard Windows and Mac mouse drivers. Cursor tracking  
speeds, mouse double-click speeds, and other options can be customized  
using the Mouse Control Panel under Windows 98, 2000, ME, NT, XP or Mac  
OS 8 and above (see operating system documentation for further informa-  
tion about customizing mouse properties).  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Off GyroRemote  
After 3 minutes of non-use, GyroRemote enters a Sleep Mode that conserves  
battery life. In Sleep Mode the unit only uses battery power when a button is  
pushed. It is not necessary to power down the unit when it is idle unless the  
unit will be traveling and may encounter inadvertent button presses.  
1. To power down GyroRemote, simultaneously press and release the  
CHANNEL button and TEACH button on the side of unit. GyroRemote  
will immediately enter deep sleep mode and will be unresponsive to  
button clicks. The unit will confirm it is powering off by flashing its  
LED three times.  
2. Repeat this sequence to power the unit back on. The unit will  
confirm it is powering on by flashing its LED for 1 second.  
Note: It may be necessary to power off the unit when traveling on commercial airlines  
due to FCC regulations regarding radio-emitting devices.  
Installing or Replacing the Batteries  
GyroRemote operates on four standard or alkaline  
AAA batteries. When GyroRemote’s batteries reach  
20% of a full charge the Status LED will blink when  
it normally lights solid. For instance, clicking and  
holding a button on a fully charged remote causes  
the Status LED to light solid. Clicking and holding a  
button on a remote with low batteries will cause the  
Status LED to blink intermittently. To replace the  
batteries:  
1. From the bottom of the remote, slide the  
battery cover open by pushing firmly  
downward with your thumbs.  
2. Remove the battery holder.  
3. Insert four new AAA batteries into battery cradle and return cradle  
into GyroRemote. When replacing the cradle into the remote, align  
the positive (+) labels. See Illustration for proper cradle alignment.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Replace battery cover.  
Four alkaline AAA batteries will generally provide up to six months of use in a  
typical presentation environment.  
Fine-tuning Cursor Control  
GyroRemote uses your standard Windows mouse driver. Any settings that  
are available to a standard desktop mouse are also available to GyroRemote.  
Multiple factors will determine how you adjust your mouse to suit your  
preference including screen resolution, mouse driver version and overall  
personal preference.  
While becoming familiar with your GyroRemote and getting a feel for the  
GyroPoint method of cursor control, Gyration recommends adjusting your  
mouse driver to the following settings:  
T
Pointer Speed – Average. Some new users prefer this setting to be  
slightly slower than average. Advanced users will increase the  
speed so that less wrist movement gives them more screen  
coverage with the cursor.  
T
Acceleration – Low or Off.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gyration Mobile Keyboard  
To Set Up and Synchronize the Keyboard with the  
Receiver  
1. Power on your computer and connect the Receiver USB cable into  
an available USB port on your computer.  
2. Follow standard USB device installation screens.  
3. Insert 4 AAA batteries into the Keyboard.  
4. Press and hold the LEARN button on the Receiver for 2 seconds. The  
STATUS light will blink slowly, indicating that the receiver is in  
“Learn Mode.”  
5. Press the TEACH button on the Gyration keyboard (see illustration  
above). The status light on the Receiver will blink rapidly for 4 sec-  
onds, then will blink slowly. Push the “Teach” button on any addi-  
nd  
tional devices (i.e. GyroRemote or 2 Keyboard) at this time.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. OPTIONAL: Press the LEARN button on the Receiver for 2 seconds  
to exit “Learn Mode.Otherwise, after five minutes, Learn Mode will  
automatically time out.  
If more than one device is being installed on the same system, place the  
Receiver into Learn Mode (step 4 above) only once, then “Teach” each device  
before exiting Learn Mode. Do not push the LEARN button on the receiver for  
each device to be added. (See “Installing 3 or More Devices” on page 13.)  
After the Teach/Learn sequence is performed, the receiver and the device  
will remain synchronized after powering down and changing channels. It is  
only necessary to perform the Teach/Learn sequence when setting a device  
up for the first time or when adding additional devices to the system.  
When the Receiver is put into Learn Mode, it erases its memory of previously  
learned devices and looks for new devices. Therefore, when adding a new  
device to a system it is necessary to put the Receiver into Learn Mode then  
Teach all devices that will be used on the system.  
To Determine Which Channel the Keyboard is Using  
The Gyration Keyboard has eight individual channels available to it. To  
determine which channel a device is currently using:  
1. Press and quickly release the CHANNEL button on the keyboard.  
Count the number of times the green LED light on the top of the  
keyboard flashes. The number of flashes indicates the channel the  
keyboard is using.  
Note: If the keyboard’s channel is changed when the computer is powered down or the  
receiver is not connected, the devices will become unsynchronized. When the system is  
running, click and release the channel button as described above to initiate a “channel  
confirm” operation. The keyboard broadcasts a message across all eight channels that  
informs the receiver what channel it is currently operating on. The receiver then  
automatically restores synchronization.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Change the Channel the Keyboard is Using  
When two devices are being used in the same proximity, each device should  
be set to operate on a unique channel. To change the channel:  
1. Click and hold the CHANNEL button on the RF Keyboard for 2  
seconds. When you release the button, the keyboard will change to  
the next channel and the green LED will flash. The number of times  
the green LED flashes indicates the new channel the keyboard is  
using.  
If a Teach/Learn sequence has already been performed, it will not be  
necessary to re-synchronize the devices.  
Tip: If you are installing three or more devices on a single receiver, see “Installing 3 or  
More Devices” on page 13.  
Powering Off the Keyboard  
It is not necessary to power down the keyboard when it is idle unless the unit  
will be traveling and may encounter inadvertent key presses.  
1. To power down the keyboard, simultaneously press and release the  
CHANNEL button and TEACH button on the top of the keyboard. The  
keyboard will immediately enter deep sleep mode and will be  
unresponsive to key or button clicks. The unit will confirm it is  
powering off by flashing its LED three times.  
2. Repeat this sequence to power on the unit. The unit will confirm it is  
powering on by flashing its LED for 1 second.  
Note: If the keyboard’s protective cover is used, power down is not required. The cover  
will prevent inadvertent key presses and the unit will remain in sleep mode with no  
radio transmission.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Keyboard Media Keys  
Key  
OS  
Support  
Program  
Support  
Function  
Win 2000,  
ME, XP  
Windows CD  
Player, Default  
Media Player  
CD or Media player scans for  
previously played track  
Win 2000,  
ME, XP  
Windows CD  
Player, Default  
Media Player  
Toggles player between Play  
and Pause modes  
Win 2000,  
ME, XP  
Windows CD  
Player, Default  
Media Player  
CD or Media player scans for  
next track on CD or music file  
Win 2000,  
ME, XP  
Windows CD  
Player, Default  
Media Player  
Puts player into Stop mode  
Win 2000,  
ME, XP  
Windows sound  
control  
Decreases Windows volume  
setting  
Win 2000,  
ME, XP  
Windows sound  
control  
Increases Windows volume  
setting  
Win 2000,  
ME, XP  
Windows sound  
control  
Mutes Windows sound  
volume  
Win 2000,  
ME, XP  
Microsoft  
Internet Explorer  
Loads the last page you  
viewed in the browser  
window  
Win 2000,  
ME, XP  
Microsoft  
Internet Explorer  
Re-loads a page you viewed  
before clicking the Back  
button  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Keyboard Media Keys (Continued)  
Key  
OS  
Support  
Program  
Support  
Function  
Win 2000,  
ME, XP  
Microsoft  
Internet Explorer  
Stops the loading process in  
the browser window  
Win 2000,  
ME, XP  
Microsoft  
Internet Explorer  
Re-loads the currently  
displayed page in the  
browser window  
Win 2000,  
ME, XP  
Microsoft  
Internet Explorer  
Launches Brower (if closed)  
and loads your Home page in  
the browser window  
Win 2000,  
ME, XP  
Microsoft  
Internet Explorer  
Opens the Search frame in  
the browser window or, if  
closed, launches Windows  
search  
Win 2000,  
ME, XP  
Microsoft  
Internet Explorer  
Opens the Favorites frame in  
the browser window  
Win 2000,  
ME, XP  
Default e-mail  
client  
Launches your default e-mail  
client  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gyration RF Receiver  
Learn Button  
Pressing the LEARN button for 2 seconds puts the receiver into “Learn Mode”  
allowing you to synchronize one or more devices with the receiver. After  
devices have been synchronized, pressing the LEARN button again for 2  
seconds takes the receiver out of Learn mode. If the receiver is not manually  
taken out of Learn Mode, it will automatically return to Normal Mode after  
five minutes.  
Status LED  
The Status LED displays useful information about modes of operation and the  
connection between receiver and transmitter(s).  
T
The Status LED remains off when the receiver is operating in  
“Normal Mode” and no devices are transmitting.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
The Status LED flickers rapidly when the receiver is operating in  
“Normal Mode” and a synchronized device is transmitting. If there is  
radio interference, the flickering light will be inconsistent.  
T
T
The Status LED blinks slowly (1 blink per second) when the receiver  
is in Learn Mode and is awaiting a Teach instruction from a device.  
The Status LED blinks rapidly for a 4-second burst when it is in  
Learn Mode and processing a Teach instruction and synchronizing  
the receiver with the device.  
Keyboard Status LEDs  
The Keyboard Status LEDs indicate whether the keyboard has the Num Lock,  
Caps Lock and/or Scroll Lock features activated.  
Conflict LED  
If an unrecognized Gyration device is attempting to operate on the same  
channel as a device that has been synchronized, the red “Conflict” LED on  
the receiver will flicker and input control may be intermittent.  
The Conflict Light will only detect interference from another RF device (i.e.  
not cordless phones, personal radios, etc.).  
Installing 3 or More Devices  
The Receiver can be taught to recognize up to eight devices (remotes, key-  
boards, etc.) on a system, but only two of those devices may be used simul-  
taneously. When setting up a system with a single receiver and 3 or more  
devices, the following guidelines must be followed:  
T
Select two channels that are free of outside interference and install  
all devices on either of those two channels. When possible, it is  
recommended that the two chosen channels be separated by at  
least one unused channel.  
T
Any of the devices installed on one channel may be used  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
simultaneously with any of the devices on the other channel. Two  
devices that share a channel may not be used simultaneously.  
When installing the devices try to determine which devices will be  
used simultaneously and set them on opposite channels.  
The following example describes a single-receiver system with two remotes  
and a keyboard that requires one remote to be used by a presenter for  
cursor control while another presenter inputs data on the keyboard. Remote  
#1 is set to channel 3 and the keyboard and remote #2 are set to channel 5.  
With this configuration, remote #1 and the keyboard can be used  
simultaneously, but remote #2 and the keyboard cannot.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GyroRemote Troubleshooting Tips  
Symptom  
Reason  
Solution  
GyroRemote LED  
comes on when  
Remote and Receiver  
not Synchronized  
Perform a Teach/Learn sequence.  
(See “GyroRemote” on page 1.)  
activate button is  
pressed, but receiver  
is unresponsive  
Cursor is visible but  
shows no movement  
Gyro not activated  
Radio Interference  
Squeeze the trigger, double-click  
trigger or press crescent shaped  
Gyro Lock button on top of  
GyroRemote.  
Cursor movement is  
choppy or erratic  
1. Change the device’s channel  
setting. (See “To Change the  
Channel GyroRemote is Using”  
on page 3.)  
2. Move receiver away from  
other electronic devices (e.g.  
monitor, speakers, radio,  
etc.).  
When pressing the  
activate button, the  
LED on the  
Batteries are low  
Batteries are dead  
GyroRemote is flashing  
Replace batteries (see page 5).  
When pressing the  
activate button, the  
LED on the  
GyroRemote is off  
Cursor moves too fast  
or too slow  
Speed or  
acceleration not set  
properly  
Change the cursor tracking speed  
in the mouse control panel (see OS  
documentation for details).  
When keyboard is in  
use, the GyroRemote  
stops working  
The GyroRemote and  
Keyboard channels  
are too close to each  
other  
Find out what channel each device  
is on (See “GyroTools Software” on  
page 2 and “To Determine Which  
Channel the Keyboard is Using” on  
page 8), then change the channels  
on the GyroRemote device to a  
channel at least 2 away from the  
keyboard channel.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keyboard Troubleshooting Tips  
Symptom  
Reason  
Solution  
Keyboard and  
Receiver not  
Synchronized  
Perform a Teach/Learn sequence  
(see page 7).  
Radio interference  
1. Change the device’s channel  
setting (See “To Change the  
Channel the Keyboard is  
Using” on page 9).  
Computer does not  
recognize data input  
2. Move receiver away from  
other electronic devices (e.g.  
monitor, speakers, radio,  
etc.).  
Dead batteries  
Replace batteries.  
Keystrokes are not  
consistently  
recognized  
Radio interference  
1. Change the device’s channel  
setting.  
2. Move receiver away from  
other electronic devices (e.g.  
monitor, speakers, radio,  
etc.).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REGULATORY INFORMATION  
ATTENTION! THIS DEVICE EMITS RADIO FREQUENCIES AND HAS NOT BEEN  
CERTIFIED BY THE FAA FOR USE ONBOARD AIRCRAFT. DO NOT USE THIS  
DEVICE AT ANY TIME ONBOARD CIVIL AIRCRAFT. TO MINIMIZE THE  
POSSIBILITY OF INTERFERENCE, POWER OFF GYROREMOTE TO ENSURE  
THAT GYROREMOTE REMAINS OFF DURING FLIGHT.  
FCC Statement  
The GyroRemote, Keyboard and Receiver have been tested and found to  
comply with the limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment  
generates, uses and radiates radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
1. Reorient or relocate the receiving antenna (television, radio, etc.).  
2. Increase the separation between the equipment and receiver.  
3. Connect the equipment to an outlet on a circuit different from that  
to which the receiver is connected.  
4. Consult the dealer or an experienced radio/TV technician for  
additional help.  
Caution: Changes or modifications not expressly approved by the party  
responsible for compliance could void the user's authority to operate the  
equipment. Contact Gyration, Inc., 12930 Saratoga Avenue, Bldg. C,  
Saratoga CA 95070. Technical Support tel: 408 973-7086. These devices  
comply with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. these devices may not cause harmful interference, and  
2. these devices must accept any interference received, including  
interference that may cause undesired operation.  
The GyroRemote and Keyboard operate in the frequency band of 49.82 to  
49.9 MHz with RF output power of less than 30 MicroWatts EIRP (Effective  
Isotropic Radiated Power).  
Warning: Using these products in any way other than as described in this  
manual or altering the antenna in any way may violate FCC rules.  
FCC ID: JJ4-GP241-001 (GyroRemote), JJ4-GP221-001 (Mobile Keyboard)  
Receiver: AS00216-001  
Canadian Radio Interference Regulations  
This Class B digital apparatus meets all requirements of the Canadian  
Interference Causing Equipment Regulations. Cet appareil numérique de la  
classe B respecte toutes les exigences du Règelement sur le matériel brouil-  
leur du Canada.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contacting Gyration  
If you have any questions on your new Gyration product, please use any of  
the phone/FAX numbers or addresses below:  
Main Office  
Gyration, Inc.  
12930 Saratoga Avenue, Bldg. C  
Saratoga, CA 95070  
USA  
Phone: 408-255-3016  
Fax: 408-255-9075  
Sales  
Phone: 800-316-5432 (Toll-free in US and Canada)  
Fax: 408-351-4433  
Technical Support  
Phone: 408-973-7086  
World Wide Web  
Warranty Information  
Gyration products come with a one-year hardware warranty. Gyration, Inc.,  
(Gyration) warrants products against defects in material and workmanship  
for a period of one year from the date of purchase from Gyration or an  
authorized Gyration agent. This warranty applies only to the original  
purchaser and is not transferable. This warranty does not cover any  
incompatibilities due to the user's computer, hardware, software or any  
other related system configuration in which the product interfaces. Proof of  
purchase will be required before any warranty consideration by Gyration  
occurs. This warranty does not cover any damage caused by negligence,  
non-authorized modifications, or parts installed without prior written  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
permission from Gyration. This warranty does not apply if the product has  
been damaged by accident, abuse, misuse, or misapplication, nor as a result  
of service to the product by anyone other than by Gyration.  
Gyration is not responsible for any lost profits, lost savings or other  
incidental or consequential damages arising out of the use of, or  
inability to use, this product. This includes damage to property and,  
to the extent permitted by law, damages for personal injury. This  
warranty is in lieu of all other warranties including implied  
warranties of merchantability and fitness for a particular purpose.  
Some states do not allow limitation of implied warranties, or exclusion or  
limitation of incidental or consequential damages, so the above limitations  
may not apply to you. This warranty gives you specific legal rights. You may  
have other rights which may vary from state to state. This warranty applies  
only to these products, and is governed by the laws of the State of California.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
International Radio Compatibility  
United States, Brazil, Canada, Israel  
CHANNELS  
FREQUENCY  
RANGE  
8
49mhz  
100 ft. (30.5 m)  
Australia, European Union, Czech Republic, Hong Kong, Hungary, Malaysia,  
Mexico, New Zealand, Norway, Philippines, Poland, Russia, Switzerland,  
Thailand  
CHANNELS  
FREQUENCY  
RANGE  
4
40mhz  
30.5 m (100 ft.)  
Japan, South Korea  
CHANNELS  
FREQUENCY  
RANGE  
8
49mhz  
7.6 m (25 ft.)  
China, Taiwan  
CHANNELS  
4
FREQUENCY  
RANGE  
40mhz  
7.6 m (25 ft.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GyroRemote & RF Keyboard  
User Manual  
PA00169-001 Rev. C  
Gyration, Inc.  
12930 Saratoga Avenue, Bldg. C  
Saratoga, CA 95070  
1.800.316.5432  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Lathe T25920 User Manual
Grizzly Sander G0527 User Manual
Hamilton Beach Blender Hand Blenders User Manual
Hasbro Portable Speaker 75024 User Manual
Honeywell Security Camera HD3VC4SAX User Manual
HP Hewlett Packard Power Supply H7421A User Manual
HP Hewlett Packard Yard Vacuum HP 8481A User Manual
Husqvarna Chainsaw 1151436 95 User Manual
Husqvarna Lawn Mower 327HDA65x series User Manual
I Data Power Supply 5250 ALLY User Manual