Graco Grill Accessory 3A0421A User Manual

Instructions-Parts  
3A0421A  
ENG  
Ratio Check Kit  
Use with mix manifold 258989 to check the ratio at the mix manifold on XP70  
plural-component sprayers.  
Important Safety Instructions  
Read all warnings and instructions in the mix man-  
ifold manual 3A0590. Save all instructions.  
Part No. 24F375  
Ref. Part No. Description  
Qty.  
1
2
3
4
5
150287  
245143  
116746  
16E987  
114315  
COUPLING  
1
1
1
1
1
VALVE, pressure, bleed  
FITTING, barbed, plated  
PLUG, ratio check  
O-RING  
E
(Closed)  
Hardener  
Restrictor  
Adjustment  
1
2
C (Closed)  
Hardener  
Outlet Tube  
3
Resin  
Outlet  
5
4
Resin plug fits  
over the hardener  
tube.  
r_24F375_3A0421_1a-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Procedure  
Open ratio check valve (2) and shut off handle (E)  
and take ratio samples.  
Procedure  
1. Close the dual shutoff handle (E), sample valve (2),  
and solvent valve (C).  
7. Close the dual shutoff handle (E) when you have  
enough material. Compare amounts in each con-  
tainer; amounts should correspond to desired ratio.  
2. Set proportioner to 50% of spray pressure.  
NOTE: If you know the mix ratio is by weight, weigh  
tared containers for a more accurate measure. The  
weight ratio will be different than the volume ratio  
unless both fluids have the same specific gravity.  
3. Place waster containers under the hardener and  
resin outlets. Open the dual shutoff handle (E). The  
hardener pressure will drop.  
4. First time use:  
8. Close the resin valve (2). This valve can be left in  
place for future ratio checks.  
a. Open the resin sample valve (2) until you have a  
typical flow or cycle rate.  
9. Flush the hardener outlet tube with solvent. See mix  
manifold manual for instructions.  
b. Adjust the hardener restrictor stem in clockwise  
until the fluid pressure gauges are balanced.  
10. Remove the ratio check plug (4) and o-ring (5) and  
save for future ratio checks.  
c. Close the dual shutoff handle (E).  
NOTICE  
5. Use after the hardener restrictor stem is pre-set:  
To prevent damage to the inlet swivel fittings, use a  
wrench on the front of the mix manifold.  
a. Open the resin sample valve (2) until the fluid  
pressure gauges are balanced.  
11. Reinstall fitting, static mixer, and hose.  
b. Close the dual shutoff handle (E).  
NOTE: The hardener restrictor adjustment should  
now be set correctly for spraying mixed material and  
taking ratio checks. No further adjustments are  
required.  
6. Hold graduated or tared containers under the resin  
outlet fitting (3) and under the hardener outlet tube.  
3A0421A  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Graco Standard Warranty  
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in  
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty  
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by  
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written  
recommendations.  
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty  
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of  
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with  
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or  
maintenance of structures, accessories, equipment or materials not supplied by Graco.  
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of  
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned  
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will  
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.  
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy  
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or  
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.  
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT  
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to  
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these  
warranties.  
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or  
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the  
negligence of Graco, or otherwise.  
FOR GRACO CANADA CUSTOMERS  
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,  
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la  
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite  
de ou en rapport, directement ou indirectement, avec les procédures concernées.  
Graco Information  
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.  
Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505  
All written and visual data contained in this document reflects the latest product information available at the time of publication.  
Graco reserves the right to make changes at any time without notice.  
Original instructions. This manual contains English. MM 3A0421  
Graco Headquarters: Minneapolis  
International Offices: Belgium, China, Japan, Korea  
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441  
Copyright 2010, Graco Inc. is registered to ISO 9001  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Automobile Parts 234397 User Manual
Graco High Chair PD202869C User Manual
Graco Outboard Motor 3A0869J User Manual
Honeywell Door RCWL100A User Manual
HP Hewlett Packard Network Card XU800 User Manual
HP Hewlett Packard Water System HP 37717C User Manual
Hunter Fan Universal Remote 81002 User Manual
Husqvarna Chainsaw 455e 455 460 User Manual
Hypertec Mouse KEYB6DBHY User Manual
iHome MP3 Docking Station iH30 User Manual