Instructions-Parts
Dump Valve and Third
Purge Valve Kits
312786G
EN
®
For use with ProMix 2KS Electronic Proportioners. For professional use only.
15V821 Dump Valve Kit
for Wall Panel
Important Safety Instructions
Read all warnings and instructions in this manual. For complete
warnings and instructions see your proportioning system manual.
Hazard symbols refer to specific procedure risks. Save all instruc-
tions.
15V354 Third Flush Valve Kit
for Wall Panel, shown on
Fluid Mix Manifold
TI12743a
TI12954a
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation
15V821 Dump Valve Kit for Wall Panel
NOTE: These instructions show this kit being installed
5. Install the dump valve assembly (includes 1, 2, 4,
on the A side. It may also be installed on the B side.
and 11) in a slot of the flange (F) at the back of the
wall panel. Secure with the nut (8).
6. Install the elbow (6) in the open port of the dump
valve adapter (2). Connect a 1/4 npsm(f) hose (12)
between the elbow (6) and nipple (19).
1. Shut off the fluid supply to the dose valve (V) at the
front of the wall panel.
2. Actuate the dose valve to relieve fluid pressure in
the valve.
7. Shut off all power to the fluid panel. Open the fluid
solenoid (9) at the correct position (Dump Valve A
or Dump Valve B) on the solenoid manifold. Con-
nect the solenoid wires to the fluid panel control
3. Relieve fluid pressure upstream and downstream of
the dose valve. See your ProMix 2KS Operation
Manual.
adapter. Install the street elbow (18) in this port.
Install the nipple (19) in the elbow.
8. Connect the tubing (7) between the solenoid mani-
fold and the tube fitting (T) on the dump valve (1).
At Front of Wall Panel
At Back of Wall Panel
A SIDE
B SIDE
1
12
V
12
T
6
18
F
TI12744a
TI12743a
8
2
19
FIG. 1: 15V821 Kit Installation
312786G
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Wall Panel
RoboMix Panel
Dump
Valve B
Dump
Valve A
3rd Flush
Valve
TI12655a
Dump
Valve B
Dump
Valve A
GFB2
3rd Flush
Valve
GFB1
TI13116a
FIG. 2: Solenoid Manifolds
J15-1 J15-2 J15-5 J15-6 J8-1 J8-2 J8-3 J8-4 J8-5
J8-6
Auto Dump
Auto Dump
3rd Purge Valve Dump Valve A
Dump Valve B Valve A (GFB1) Valve B (GFB2)
Wire Color
J15-1
J15-2
J15-5
J15-6
J8-5
J8-6
J8-3
J8-4
J8-1
J8-2
Red
Black
FIG. 3: 255765 Fluid Panel Control Board, Detail View of Solenoid Connections
4
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
15V354 Third Flush Valve Kit for Wall Panel
7. Connect the tubing (13, 14) between the solenoid
manifold and the tube fittings (T) on the flush valve
1. Shut off the air and fluid supply to the ProMix 2KS.
2. Relieve pressure. See your ProMix 2KS Operation
Manual.
3. See FIG. 4. Remove the air flush valve (AFV) from
the fluid mix manifold (FM) and set it aside.
6
1
8
FM
TI12956a
FIG. 5: Install Double Valve Mounting Block
AFV
TI12955a
1
FIG. 4: Disconnect Air Flush Valve
AFV
7
4. See FIG. 5. Install the o-ring (6), double valve
mounting block (1), and screws (8).
2
double valve block (1). Assemble the third flush
valve kit parts (2, 3, 4, 6, 9, 10, 11) as shown on
TI12957a
FIG. 6: Install Third Flush Valve
6. Shut off all power to the fluid panel. Open the fluid
solenoid (12) and two tube connectors (15) at the
correct position (3rd Flush Valve) on the solenoid
manifold. Connect the solenoid wires to the fluid
panel control board as shown in FIG. 3.
312786G
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
15V822 Dump Valve Kit for RoboMix
NOTE: These instructions show this kit being installed
on the B side. It may also be installed on the A side.
valve (V) in the RoboMix.
2. Actuate the dose valve to relieve fluid pressure in
the valve.
3. Relieve fluid pressure upstream and downstream of
the dose valve. See your ProMix 2KS Operation
Manual.
4. Remove the plug from the dose valve adapter.
Apply thread sealant and install the elbow (8) in this
port.
5. Install the valve adapter (3) in the RoboMix. Secure
with four screws (11). Apply thread sealant and
install the nipple (9) through the back of the Robo-
Mix and into the adapter. Install the swivel (6) in the
opposite side of the adapter.
6. Install the seat (2), o-ring (10), and dump valve (1)
in the adapter (3).
7. Connect the hose (5) between the swivel (6) and
elbow (8).
8. Shut off all power to the fluid panel. Open the fluid
Install the solenoid (4) at the correct position (Dump
Valve A or Dump Valve B) on the solenoid manifold.
Connect the solenoid wires to the fluid panel control
9. Connect the tubing (13) between the solenoid mani-
fold and the tube fitting (T) on the dump valve (1).
6
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1
T
10
2
3
TI12655a
6
Dump
Valve B
Dump
Valve A
5
V
8
4
11
9
TI13047a
TI13045a
FIG. 7: 15V822 Kit Installation
15V202 Third Flush Valve Kit for RoboMix
7. Install the o-ring (2), seat (1), o-ring (6), and third
flush valve (5) in the adapter (3).
1. Shut off the air and fluid supply to the ProMix 2KS.
2. Relieve pressure. See your ProMix 2KS Operation
Manual.
Open the fluid panel. Install the solenoid (8) in the
third flush valve position on the solenoid manifold.
Install the tube connector (9). Connect the solenoid
wires to the fluid panel control board as shown in
on page 13.
valve (AFV). Install an o-ring (6) in this port.
4. Install the third flush valve adapter (3) in the Robo-
Mix. Ensure that the o-ring (6) remains in place to
seal between the adapter and the air flush valve
adapter.
9. Connect the tubing (13) between the solenoid mani-
fold and the tube fitting (T) on the third flush valve
5. Secure the adapter (3) to the air flush valve adapter
with four screws (10) inserted through the side wall
of the RoboMix. Torque to 70 in-lb (8 N•m).
10. Connect the third flush fluid supply line to the check
valve (4).
6. Apply thread sealant and install the check valve (4)
through the back of the RoboMix and into the third
flush valve adapter (3).
312786G
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
9
5
T
6
1
3
6
TI12655a
2
8
4
10
TI13046a
TI13047a
FIG. 8: 15V202 Kit Installation
15X247 Auto Dump Valve Kit
6. Connect a 1/4 npsm(f) dump hose (not supplied) to
the 1/4 npsm(m) threaded stud at the bottom of the
adapter (2). When the gun closes, the dump valve
opens and fluid is dumped through the stud.
1. Close the component A and component B shutoff
valves on the fluid manifold.
2. Trigger the gun to relieve fluid pressure downstream
of the fluid manifold.
7. Shut off all power to the fluid panel. Open the fluid
solenoid (5) at the correct position (GFB1 or GFB2)
on the solenoid manifold. Connect the solenoid
wires to J8 on the fluid panel control board as
(6), large o-ring (7), and dump valve (1) in the valve
adapter (2).
4. Install the valve adapter (2) in the mixed material
line, downstream of the static mixer and as close to
the gun as possible.
8. Install the tube connector (9) in the solenoid mani-
fold. Connect the tubing (4) between the connector
and the tube fitting (T) on the dump valve (1). See
NOTE: Connect the static mixer to one 1/4 npt port of
the valve adapter.
5. Install the nipple (8) in the other port of the adapter
(2). Connect the gun line to this nipple.
8
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Schematic Diagrams
Schematic Diagrams
System Pneumatic Schematic
COLOR
VALVE
STACKS
COLOR
CHANGE
CONTROL
AIR EXHAUST MUFFLER
MANIFOLD
COLOR 1
COLOR 2
COLOR 3
12 VDC
COLOR 4
COLOR 5
COLOR 6
COLOR 7
DOSE A
VALVE
OSE
CL
4-WAY SOLENOID
A
A
B
B
5/32 TUBE
OPEN
COLOR 8
12 VDC
COLOR SOLVENT
COLOR 9
DOSE B
VALVE
OSE
CL
4-WAY SOLENOID
COLOR 10
COLOR 11
COLOR 12
CATALYST 1
CATALYST 2
CATALYST 3
CATALYST 4
CATALYST SOLVENT
5/32 TUBE
OPEN
12 VDC
PURGE A
VALVE
OSE
05
CL
4-WAY SOLENOID
A
B
5/32 TUBE
OPEN
3/8 AIR FILTER
MANUAL DRAIN
5 MICRON
12 VDC
WALL MOUNT ONLY
PURGE B
VALVE
COLOR 13
COLOR 14
COLOR 15
COLOR 16
COLOR 17
COLOR 18
COLOR 19
COLOR 20
COLOR 21
COLOR 22
COLOR 23
COLOR 24
COLOR 25
COLOR 26
COLOR 27
COLOR 28
COLOR 29
COLOR 30
OSE
CL
4-WAY SOLENOID
A
A
B
B
5/32 TUBE
OPEN
AIR INPUT
12 VDC
PURGE C
VALVE
OSE
CL
(OPTIONAL)
4-WAY SOLENOID
AIR EXHAUST MUFFLER
12 VDC
5/32 TUBE
OPEN
DUMP A
VALVE
(OPTIONAL)
3-WAY SOLENOID
5/32 TUBE
OPEN
A
A
AIR INPUT
12 VDC
DUMP B
VALVE
(OPTIONAL)
3-WAY SOLENOID
5/32 TUBE
OPEN
MAC
36 SERIES SOLENOID VALVES
12 VDC
GFB 1
VALVE
3-WAY SOLENOID
(OPTIONAL)
5/32 TUBE
OPEN
A
A
12 VDC
GFB 2
VALVE
(OPTIONAL)
3-WAY SOLENOID
5/32 TUBE
OPEN
MANIFOLD
10
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Schematic Diagrams
Tubing Schematic
B3
13
B1
A2
A6
13
GFB1-P
GFB2-P
B7
B5
AT
DB
DA
A4
B7
A8
TI13857a
TI13858a
B1
B3
B5
GFB1-C GFB2-C
GFB1-A
GFB2-A
TI13862a
A2
A4
A6
A8
DA DB
GFB1-P
GFB1-A
ATOM-1
ATOM-2
GFB1-C
GFB1-S
GFB1-S
GFB2-S
GFB1
GFB2
GFB2-P
GFB2-A
GFB2-C
GFB2-S
ATOM-2
ATOM-1
TI13861a
TI13860a
TI13863a
312786G
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Schematic Diagrams
Table 1: Tubing Chart
Ending
Tube OD
in. (mm)
Color
Description
Starting Point
Point
Tube Ref. No.
Green
Green
Green
Green
Green
Green
Dose A On
Dose B On
Purge A On
Purge B On
Dump A
A2
A4
A6
A8
DA
DB
A2
A4
A6
A8
DA
DB
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
336
336
336
336
Included in optional
Dump Valve Kit
15V821
Dump B
Red
Dose A Off
B1
B3
B5
B7
13
B1
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
1/4 (6)
337
337
337
337
334
Red
Dose B Off
B3
Red
Purge A Off
B5
Red
Purge B Off
B7
Natural
Natural
Solenoid Air Supply
13
Gun Flush Box 1 Pressure GFB1-A
Switch Signal
GFB1-A
5/32 (4)
Natural
Natural
Natural
Natural
Natural
Natural
Natural
Gun Flush Box 2 Pressure GFB2-A
Switch Air
GFB2-A
GFB1-C
GFB2-C
GFB1-P
GFB2-P
GFB1-S
GFB2-S
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
5/32 (4)
Gun Flush Box 1 Trigger
Air
GFB1-C
GFB2-C
GFB1-P
GFB2-P
GFB1-S
GFB2-S
Gun Flush Box 2 Trigger
Air
Included in optional
Gun Flush Box Kit
15V826
Gun Flush Box 1 Supply
Air
Gun Flush Box 2 Supply
Air
Gun Flush Box 1 Safety
Interlock
Gun Flush Box 2 Safety
Interlock
Natural
Natural
Gun 1 Atomizing Air
Gun 2 Atomizing Air
ATOM-1
ATOM-2
ATOM-1
ATOM-2
1/4 (6)
1/4 (6)
User supplied. Con-
nects air flow switch to
gun air shutoff valve.
Natural
Purge Air Supply
Use as a separate line
connected directly to the
main shop air line. Do
not connect to the unit’s
main air supply or to the
air manifold (335).
AT
1/4 (6)
338
12
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Schematic Diagrams
System Electrical Schematic
Hazardous Area
HAZARDOUS AREA
3X CABLE
FLUID PANEL CONTROL BOX
FLUID
1
2
3
4
5
6
PWR (RED)
FLOW METER A
COM (BLACK)
SIG (WHITE)
SHIELD/GRN
PWR (RED)
PANEL
J3
CONTROL
BOARD
I.S. METERS
FLOW METER B
COM (BLACK)
SIG (WHITE)
SHIELD/GRN
PWR (RED)
1
2
3
4
5
6
FLOW METER SOLVENT
COM (BLACK)
SIG (WHITE)
SHIELD/GRN
J2
J4
J12
TECNO
SIG (RED)
1
2
J1
V/P
COM (BLK)
1
2
3
4
5
FLOW
CONTROL
BOARD
V/P ANALOG OUT (WHT)
GROUND
TERMINAL
PRESS. (GRN)
+12 V (RED)
GND (BLK)
1
UNUSED
UNUSED
UNUSED
UNUSED
UNUSED
UNUSED
2
3
4
5
6
+ PRESSURE (GRN)
COM (RED)
EX+ (WHT)
- PRESSURE (BLK)
SHIELD (BARE)
FLUID
PRESS.
SENS.
CHASSIS (BARE)
1
2
3
4
5
J10
J13
(10')/
(40')
1
2
3
+12VDC I/S
COM
SHIELD
1
2
3
4
5
6
J5
MH2
J7/J11
1
4
5
2
3
COLOR
BOARD 1
(COLORS
1 THRU 12,
CATALYST
1 THRU 4)
6' STD.
(3'-100' OPTIONS)
3
2
5
4
1
GRD (BLK)
+12VDC (RED)
SHIELD (BARE)
CAN H (WHT)
CAN L (BLU)
J11
J7
MANIFOLD
MANIFOLD
6
5
4
3
2
1
COM
+12VDC
COM
1
2
3
4
5
6
CLR 9
+12VDC
CLR 8
COM
+12VDC
COM
CLR 10
CLR 11
CLR 7
CLR 6
+12VDC
COM
J8
J9
50' STD.
+12VDC
COM
+12VDC
BOOTH
CONTROL
BOARD
3
3
2
5
4
1
GRD (BLK)
2
5
4
1
+12VDC (RED)
SHIELD (BARE)
CAN H (WHT)
CAN L (BLU)
1
2
3
4
5
6
+12VDC
COM
6
5
4
3
2
1
COM
+12VDC
COM
CLR 5
CLR 4
CLR 3
CLR 12
CAT 4
CAT 3
+12VDC
COM
J16
J15
+12VDC
COM
+12VDC
COM
+12VDC
COM
+12VDC
COM
6
5
4
3
2
1
1
2
3
4
5
6
+12VDC
COM
CAT 2
CLR 2
+12VDC
COM
CAT 1
MANIFOLD
CLR 1
J14
J10
+12VDC
COM
BLACK
RED
6
+12VDC
COM
SOL CAT
DUMP B
GFB #1
GFB #2
SOL CLR
+12VDC
5
4
3
2
1
BLACK
RED
1
4
5
5
2
2
3
3
J8
J7/J11
J7/J11
BLACK
RED
6' STD.
BLACK
RED
6
5
4
3
2
1
1
4
DUMP A
NOT USED
PURGE C
COLOR
BOARD 2
(COLORS
BLACK
RED
J15
MANIFOLD
13 THRU 30)
BLACK
RED
MANIFOLD
BLACK
RED
6
5
4
3
2
1
MANIFOLD
PURGE B
PURGE A
NOT USED
1
2
3
4
5
6
+12VDC
COM
6
5
4
3
2
1
COM
+12VDC
COM
CLR 21
CLR 20
CLR 19
CLR 22
CLR 23
CLR 24
BLACK
RED
+12VDC
COM
J14
J9
J8
J9
+12VDC
COM
+12VDC
COM
BLACK
RED
+12VDC
1
2
3
4
5
6
+12VDC
COM
CLR 18
CLR 17
CLR 16
6
5
4
3
2
1
COM
+12VDC
COM
6
5
4
3
2
1
BLACK
RED
CLR 25
CLR 26
CLR 27
NOT USED
DOSE B
+12VDC
COM
J15
J14
J16
BLACK
RED
+12VDC
COM
+12VDC
COM
+12VDC
BLACK
RED
DOSE A
1
2
3
4
5
6
+12VDC
COM
COM
+12VDC
COM
6
5
4
3
2
1
CLR 15
CLR 14
CLR 13
CLR 28
CLR 29
CLR 30
+12VDC
COM
1
SIG
J10
+12VDC
COM
AIR FLOW SWITCH 1
2
COM
SIG
+12VDC
COM
+12VDC
3
AIR FLOW SWITCH 2
4
COM
SIG
5
SOLVENT FLOW SWITCH
GFB 1 PRESSURE SWITCH
GFB 2 PRESSURE SWITCH
6
COM
SIG
FO OUT
(BLU)
J1
J4
J6
7
8
COM
SIG
9
FO IN
(BLK)
10
COM
312786G
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
Parts
15V821 Dump Valve Kit for Wall Panel
18
1*
19
*14
*11
*4
A B
12
*2
15
6
13
7
9
8
TI13116a
TI12742b
Ref.
No. Part No. Description
Ref.
No. Part No. Description
Qty
Qty
12
13
206966 HOSE; 1-1/2 ft (0.46 m)
111328 CONNECTOR; 10-32 x 5/32 in. (4
mm) OD tube
O-RING; ptfe
101970 PLUG
1
1
1*
24W310 VALVE, dispense; includes 14; see
manual 312782
15T717 ADAPTER, dump valve
111457 O-RING; ptfe
114342 ELBOW; 1/4 npt (mbe)
1
2*
4*†
6
1
1
1
1
14*† n/a
1
1
1
1
15
18
19
166866 ELBOW, street; 1/4 npt (m x f)
C20482 NIPPLE; 1/4 npt
7
n/a
TUBE; nylon; 5/32 in. (4 mm) OD;
2 ft (0.61 m)
8*
9
n/a
NUT, hex; 9/16-18
1
1
1
*
Parts included in 16A079 Dump Valve Replacement
Kit (purchase separately).
121324 VALVE, solenoid, dump valve
11*† n/a
SEAT, dump valve; sst
† Order Kit 16A560 to replace a single seat. The kit
includes a seat (11) and o-rings (4 and 14).
NOTE: The standard valve seat (11) is SST. To install a
carbide seat, order Kit 24U054. The kit includes a single
carbide seat and o-rings 4 and 14.
Parts labeled n/a are not available separately.
14
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
15V354 Third Flush Valve Kit for Wall Panel
6
8
‡11
3
7
5
1
TI12953a
2
‡4
‡6
9
10
12
15
TI12652a
Ref.
No. Part No. Description
11‡ n/a SEAT, valve
Ref.
Qty
No. Part No. Description
1
2
Qty
1
1
15U673 BLOCK, double valve mount
15X303 VALVE, dispense; includes item 4;
see manual 312782
1
1
12
13
121374 VALVE, solenoid, 4-way
n/a
TUBE; nylon; 5/32 in. (4 mm) OD; 3
1
1
2
ft (0.9 m); green
TUBE; nylon; 5/32 in. (4 mm) OD; 3
ft (0.9 m); red
3
4‡
5
6‡
7
15T600 ADAPTER, valve
1
2
3
5
2
14
15
n/a
n/a
O-RING; ptfe
101970 PLUG, pipe; 1/4 npt
109450 O-RING; ptfe
114263 CONNECTOR; 1/8 npt(m) x 5/32 in.
(4 mm) OD tube
n/a
SCREW, cap, socket-hd; 5/16-24 x
3/4 in. (19 mm)
8
109031 SCREW, cap, socket-hd; 5/16-24 x
1 in. (25 mm)
2
‡ Parts included in Valve Seat Kit 24A861 (purchase
separately).
9
10
166866 ELBOW, street; 1/4 npt (m x f)
501867 VALVE, check
1
1
Parts labeled n/a are not available separately.
312786G
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
15V822 Dump Valve Kit for RoboMix
1
TI12655a
10
Dump
Valve B
Dump
Valve A
2
3
6
5
4
8
11
TI13047a
9
TI13045a
Ref.
No. Part No. Description
Ref.
No. Part No. Description
Qty
Qty
11
12
13
C19979 SCREW, cap, socket-hd; 10-24 x
3/8 in. (10 mm)
111328 CONNECTOR; 10-32 x 5/32 in. (4
mm) OD tube
4
1
15X304 VALVE, dispense; includes item 10;
see manual 312782
1
1
1
2
3
4
5
15V888 RETAINER, seat, RoboMix
15U713 VALVE, adapter; RoboMix
121795 VALVE, solenoid, 4-way
15U720 HOSE; 1/4 npt (mbe); 15-1/2 in.
(394 mm); ptfe
1
1
1
1
n/a
TUBE; nylon; 5/32 in. (4 mm) OD; 3
ft (0.9 m); green
14
15
16
114342 ELBOW; 1/4 npt (mbe)
104644 PLUG, screw
104640 GASKET; buna-N
1
1
1
6
8
9
10
114339 UNION, swivel; 1/4 npt
114446 ELBOW; 1/4 npt(m) x 1/4 npsm(f)
166421 NIPPLE; 1/4 npt
1
1
1
1
n/a
O-RING; ptfe
Parts labeled n/a are not available separately.
16
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
15V202 Third Flush Valve Kit for RoboMix
9
5
6
3
1
2
TI12655a
8
4
10
TI13046a
TI13047a
Ref.
No. Part No. Description
Qty
1
2
3
4
5
15V888 RETAINER, seat, RoboMix
109450 O-RING; ptfe
15U715 VALVE, adapter; RoboMix
501867 VALVE, check
15X304 VALVE, dispense; includes item 6;
see manual 312782
1
1
1
1
1
6
8
9
n/a
O-RING; ptfe
2
1
1
121795 VALVE, solenoid, 4-way
111328 CONNECTOR; 10-32 x 5/32 in. (4
mm) OD tube
10
13
110420 SCREW, cap, socket-hd; 10-24 x
1-1/2 in. (38 mm)
4
1
n/a
TUBE; nylon; 5/32 in. (4 mm) OD; 2
ft (0.61 m); green
Parts labeled n/a are not available separately.
312786G
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
15X247 Auto Dump Valve Kit
1
7
6
3
8
2
9
4
5
TI13116a
TI14283a
Ref.
No. Part No. Description
Qty
1
2
3†
4
5
6†
7†
8
24W310 VALVE, dispense; includes 7 ; see manual 312782
15T717 ADAPTER, dump valve
1
1
1
1
1
1
1
1
1
111457 O-RING; ptfe
n/a
TUBE; nylon; 5/32 in. (4 mm) OD; 5 ft (1.52 m)
121324 VALVE, solenoid, dump valve
n/a
n/a
SEAT, dump valve; sst
O-RING; ptfe
C20482 NIPPLE; 1/4 npt
111328 CONNECTOR; 10-32 x 5/32 in. (4 mm) OD tube
9
† Order Kit 16A560 to replace a single seat. The kit
includes a seat (6) and o-rings (3 and 7).
NOTE: The standard valve seat (6) is SST. To install a
carbide seat, order Kit 24U054. The kit includes a single
carbide seat and o-rings 3 and 7.
Parts labeled n/a are not available separately.
18
312786G
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Notes
312786G
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs
will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
312786
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA
Copyright 2008, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Revision G, August 2014
Download from Www.Somanuals.com. All Manuals Search And Download.
|